//does sleep association tests and hibernate association tests.
public void AdvancedAssociationTests()
{
if (m_AssocTestOptions.HasFlag(ASSOC_TEST_OPTIONS.Sleep))
{
if (!(PowerManager.IsS3Supported() || PowerManager.IsAoAcCapableMachine()))
{
LogError("S3 or AOAC is not supported. At least one must be supported. Run powercfg -a from an elevated cmd prompt to determine supported sleep states");
}
//test AP1 - sleep|CS - AP1 then AP1 - sleep|CS - AP2
if (PowerManager.IsAoAcCapableMachine())
{
//AP1 - CS - AP1
string sameAPName = "Association sleep and resume - Same AP - Connected Standby";
string sameAPDescription = "Sleep and resume with manual profile - Connected device goes to CS - Test connection to same AP";
Helpers.LogVariationStart(sameAPName, sameAPDescription);
AssociateSameAP(0, false, false);
Helpers.LogVariationStop(sameAPName);
//AP1 - CS - AP2
string differentAPName = "Association sleep and resume - Different AP - Connected Standby";
string differentAPDescription = "Sleep and resume with manual profile - Connected device goes to CS - Turn off AP radio - Turn on another AP radio - Test connection to new AP";
Helpers.LogVariationStart(differentAPName, differentAPDescription);
AssociateDifferentAP(0, 1, false, m_DeviceSupports5GHz, false);
Helpers.LogVariationStop(differentAPName);
}
else
{
//AP1 - Sleep - AP1
string sameAPName = "Association sleep and resume - Same AP";
string sameAPDescription = "Sleep and resume with manual profile - Connected device goes to sleep - Test connection to same AP";
Helpers.LogVariationStart(sameAPName, sameAPDescription);
AssociateSameAP(0, false, false);
Helpers.LogVariationStop(sameAPName);
//AP1 - Sleep - AP2
string differentAPName = "Association sleep and resume - Different AP";
string differentAPDescription = "Sleep and resume with manual profile - Connected device goes to sleep - Turn off AP radio - Turn on another AP radio - Test connection to new AP";
Helpers.LogVariationStart(differentAPName, differentAPDescription);
AssociateDifferentAP(0, 1, false, m_DeviceSupports5GHz, false);
Helpers.LogVariationStop(differentAPName);
}
}
if (m_AssocTestOptions.HasFlag(ASSOC_TEST_OPTIONS.Hibernate))
{
//test AP2 - hibernate - AP2 then AP2 - hibernate - AP1
//AP2 - hiber - AP2
if (PowerManager.IsS4Supported())
{
string sameAPName = "Association hibernate and resume - Same AP";
string sameAPDescription = "Hibernate and resume with manual profile - Connected device hibernates - Test connection to same AP";
Helpers.LogVariationStart(sameAPName, sameAPDescription);
AssociateSameAP(1, m_DeviceSupports5GHz, true);
Helpers.LogVariationStop(sameAPName);
//AP2 - hiber - AP1
string differentAPName = "Association hibernate and resume - Different AP";
string differentAPDescription = "Hibernate and resume with manual profile - Connected device hibernates - Turn off AP radio - Turn on another AP radio - Test connection to new AP";
Helpers.LogVariationStart(differentAPName, differentAPDescription);
AssociateDifferentAP(1, 0, m_DeviceSupports5GHz, false, true);
Helpers.LogVariationStop(differentAPName);
}
}
}
public void BasicAssociationTest()
{
string variationName = "Basic Association test";
string variationDescription = "Associate to first AP with manual profile - Turn Off Radio - Associate to second AP with manual profile";
Helpers.LogVariationStart(variationName, variationDescription);
Log("Deleting all wlan profiles");
DeleteProfiles();
Log("Starting Echo Services");
CreateEchoServer();
//Radios of all APs are turned on by the SetupRoutersIfNeeded();
Log("Setting up Routers");
SetupRoutersIfNeeded();
string Profile;
APConfig ap1Config = m_APConfigs[0];
APConfig ap2Config = m_APConfigs[1];
string ap1_ssid = ap1Config.SSID_24GHZ;
string ap2_ssid = (m_DeviceSupports5GHz) ? ap2Config.SSID_5GHZ : ap2Config.SSID_24GHZ;
//In general the typical usage pattern of radio states for APs should be that they are only turned on when needed
// as this best matches the scenario where the user moves from location A to location B.
//Turn off AP1 5 GHz (never used)
SetRadioState(0, false, true);
//Turn off AP2 (both 2.4 and 5, will be used later)
SetRadioState(1, false, false);
SetRadioState(1, false, true);
LogMajor("Associate with manual profile to " + ap1_ssid + " - Turn AP off - Associate with manual profile to " + ap2_ssid);
// Create a 2.4 GHz profile for first router.
Log("Creating a manual profile for SSID " + ap1_ssid);
Profile = CreateProfile(0, ConnectionMode.Manual, false);
LogMajor("Connecting to " + ap1_ssid);
if (!ConnectToAP(ap1_ssid))
{
return;
}
LogMajor("Validating association bssid");
if (!ValidateRadioAssociation(0, false))
{
return;
}
LogMajor("Validating connection by connecting to echo services and performing echo");
if (!PerformEcho(0, false))
{
return;
}
//Turn off AP1 2.4 GHz (not needed anymore)
SetRadioState(0, false, false);
m_WlanApi.DeleteProfile(m_TestInterface.Id, ap1_ssid);
//AP2 next
//Turn on AP2
SetRadioState(1, true, m_DeviceSupports5GHz);
// Create a profile for second router.
Log("Creating a manual profile for SSID " + ap2_ssid);
Profile = CreateProfile(1, ConnectionMode.Manual, m_DeviceSupports5GHz);
LogMajor("Connecting to " + ap2_ssid);
if (!ConnectToAP(ap2_ssid))
{
return;
}
LogMajor("Validating association bssid");
if (!ValidateRadioAssociation(1, m_DeviceSupports5GHz))
{
return;
}
LogMajor("Validating connection by connecting to echo services and performing echo");
if (!PerformEcho(1, m_DeviceSupports5GHz))
{
return;
}
m_WlanApi.DeleteProfile(m_TestInterface.Id, ap2_ssid);
Helpers.LogVariationStop(variationName);
}
public static void Roam(RunTimeConfiguration rc,
APConfigParameter AP1Config24GHz,
APConfigParameter AP1Config5GHz,
APConfigParameter AP2Config24GHz,
APConfigParameter AP2Config5GHz,
ROAM_TEST_OPTIONS RoamTestOptions)
{
WlanHckTestLogger traceProvider = new WlanHckTestLogger("RoamingDriver");
using (UsingGroup g = new UsingGroup())
{
traceProvider.LogComment("Roaming Scenarios Begin");
try
{
WhckRoaming hckRoaming = new WhckRoaming(rc,
AP1Config24GHz,
AP1Config5GHz,
AP2Config24GHz,
AP2Config5GHz,
RoamTestOptions);
g.Add(hckRoaming);
if (RoamTestOptions.HasFlag(ROAM_TEST_OPTIONS.SuddenLossOfSignal))
{
string scenarioName = "Roaming " + ROAM_TEST_OPTIONS.SuddenLossOfSignal.ToString();
Helpers.LogVariationStart(scenarioName, scenarioName);
traceProvider.LogComment("Testing sudden loss of Signal");
hckRoaming.SuddenLossOfSignal();
Helpers.LogVariationStop(scenarioName);
}
if (RoamTestOptions.HasFlag(ROAM_TEST_OPTIONS.SuddenDropOfSignal))
{
string scenarioName = "Roaming " + ROAM_TEST_OPTIONS.SuddenDropOfSignal.ToString();
Helpers.LogVariationStart(scenarioName, scenarioName);
traceProvider.LogComment("Testing sudden drop of Signal");
hckRoaming.SuddenDropOfSignal();
Helpers.LogVariationStop(scenarioName);
}
if (RoamTestOptions.HasFlag(ROAM_TEST_OPTIONS.GradualDropOfSignal))
{
string scenarioName = "Roaming " + ROAM_TEST_OPTIONS.GradualDropOfSignal.ToString();
Helpers.LogVariationStart(scenarioName, scenarioName);
traceProvider.LogComment("Testing gradual drop of Signal");
hckRoaming.GradualDropOfSignal();
Helpers.LogVariationStop(scenarioName);
}
if (RoamTestOptions.HasFlag(ROAM_TEST_OPTIONS.GradualLossOfSignal))
{
string scenarioName = "Roaming " + ROAM_TEST_OPTIONS.GradualLossOfSignal.ToString();
Helpers.LogVariationStart(scenarioName, scenarioName);
traceProvider.LogComment("Testing gradual loss of Signal");
hckRoaming.GradualLossOfSignal();
Helpers.LogVariationStop(scenarioName);
}
}
catch (Exception e)
{
traceProvider.LogError("Error - " + e.Message);
throw;
}
}
}
