private void OpenExportWindow()
{
if (exportWindowIsOpen == false)
{
exportingWindow = new ExportPrintItemWindow(this.printItemWrapper);
this.exportWindowIsOpen = true;
exportingWindow.Closed += new EventHandler(ExportLibraryItemWindow_Closed);
exportingWindow.ShowAsSystemWindow ();
}
else
{
if (exportingWindow != null)
{
exportingWindow.BringToFront ();
}
}
}
private MatterControlApplication(double width, double height, out bool showWindow)
: base(width, height)
{
Name = "MatterControl";
showWindow = false;
// set this at startup so that we can tell next time if it got set to true in close
UserSettings.Instance.Fields.StartCount = UserSettings.Instance.Fields.StartCount + 1;
this.commandLineArgs = Environment.GetCommandLineArgs();
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
bool forceSofwareRendering = false;
for (int currentCommandIndex = 0; currentCommandIndex < commandLineArgs.Length; currentCommandIndex++)
{
string command = commandLineArgs[currentCommandIndex];
string commandUpper = command.ToUpper();
switch (commandUpper)
{
case "TEST":
CheckKnownAssemblyConditionalCompSymbols();
return;
case "FORCE_SOFTWARE_RENDERING":
forceSofwareRendering = true;
GL.ForceSoftwareRendering();
break;
case "MHSERIAL_TO_ANDROID":
{
Dictionary<string, string> vidPid_NameDictionary = new Dictionary<string, string>();
string[] MHSerialLines = File.ReadAllLines(Path.Combine("..", "..", "StaticData", "Drivers", "MHSerial", "MHSerial.inf"));
foreach (string line in MHSerialLines)
{
if (line.Contains("=DriverInstall,"))
{
string name = Regex.Match(line, "%(.*).name").Groups[1].Value;
string vid = Regex.Match(line, "VID_(.*)&PID").Groups[1].Value;
string pid = Regex.Match(line, "PID_([0-9a-fA-F]+)").Groups[1].Value;
string vidPid = "{0},{1}".FormatWith(vid, pid);
if (!vidPid_NameDictionary.ContainsKey(vidPid))
{
vidPid_NameDictionary.Add(vidPid, name);
}
}
}
using (StreamWriter deviceFilter = new StreamWriter("deviceFilter.txt"))
{
using (StreamWriter serialPort = new StreamWriter("serialPort.txt"))
{
foreach (KeyValuePair<string, string> vidPid_Name in vidPid_NameDictionary)
{
string[] vidPid = vidPid_Name.Key.Split(',');
int vid = Int32.Parse(vidPid[0], System.Globalization.NumberStyles.HexNumber);
int pid = Int32.Parse(vidPid[1], System.Globalization.NumberStyles.HexNumber);
serialPort.WriteLine("customTable.AddProduct(0x{0:X4}, 0x{1:X4}, cdcDriverType); // {2}".FormatWith(vid, pid, vidPid_Name.Value));
deviceFilter.WriteLine("<!-- {2} -->\n<usb-device vendor-id=\"{0}\" product-id=\"{1}\" />".FormatWith(vid, pid, vidPid_Name.Value));
}
}
}
}
return;
case "CLEAR_CACHE":
AboutWidget.DeleteCacheData();
break;
case "SHOW_MEMORY":
ShowMemoryUsed = true;
break;
case "DO_GC_COLLECT_EVERY_DRAW":
ShowMemoryUsed = true;
DoCGCollectEveryDraw = true;
break;
case "CREATE_AND_SELECT_PRINTER":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
currentCommandIndex++;
string argument = commandLineArgs[currentCommandIndex];
string[] printerData = argument.Split(',');
if (printerData.Length >= 2)
{
Printer ActivePrinter = new Printer();
ActivePrinter.Name = "Auto: {0} {1}".FormatWith(printerData[0], printerData[1]);
ActivePrinter.Make = printerData[0];
ActivePrinter.Model = printerData[1];
if (printerData.Length == 3)
{
ActivePrinter.ComPort = printerData[2];
}
PrinterSetupStatus test = new PrinterSetupStatus(ActivePrinter);
test.LoadDefaultSliceSettings(ActivePrinter.Make, ActivePrinter.Model);
ActivePrinterProfile.Instance.ActivePrinter = ActivePrinter;
}
}
break;
case "CONNECT_TO_PRINTER":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
PrinterConnectionAndCommunication.Instance.ConnectToActivePrinter();
}
break;
case "START_PRINT":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
bool hasBeenRun = false;
currentCommandIndex++;
string fullPath = commandLineArgs[currentCommandIndex];
QueueData.Instance.RemoveAll();
if (!string.IsNullOrEmpty(fullPath))
{
string fileName = Path.GetFileNameWithoutExtension(fullPath);
QueueData.Instance.AddItem(new PrintItemWrapper(new PrintItem(fileName, fullPath)));
PrinterConnectionAndCommunication.Instance.CommunicationStateChanged.RegisterEvent((sender, e) =>
{
if (!hasBeenRun && PrinterConnectionAndCommunication.Instance.CommunicationState == PrinterConnectionAndCommunication.CommunicationStates.Connected)
{
hasBeenRun = true;
PrinterConnectionAndCommunication.Instance.PrintActivePartIfPossible();
}
}, ref unregisterEvent);
}
}
break;
case "SLICE_AND_EXPORT_GCODE":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
currentCommandIndex++;
string fullPath = commandLineArgs[currentCommandIndex];
QueueData.Instance.RemoveAll();
if (!string.IsNullOrEmpty(fullPath))
{
string fileName = Path.GetFileNameWithoutExtension(fullPath);
PrintItemWrapper printItemWrapper = new PrintItemWrapper(new PrintItem(fileName, fullPath));
QueueData.Instance.AddItem(printItemWrapper);
SlicingQueue.Instance.QueuePartForSlicing(printItemWrapper);
ExportPrintItemWindow exportForTest = new ExportPrintItemWindow(printItemWrapper);
exportForTest.ExportGcodeCommandLineUtility(fileName);
}
}
break;
}
if (MeshFileIo.ValidFileExtensions().Contains(Path.GetExtension(command).ToUpper()))
{
// If we are the only instance running then do nothing.
// Else send these to the running instance so it can load them.
}
}
//WriteTestGCodeFile();
#if !DEBUG
if (File.Exists("RunUnitTests.txt"))
#endif
{
#if IS_WINDOWS_FORMS
if (!Clipboard.IsInitialized)
{
Clipboard.SetSystemClipboard(new WindowsFormsClipboard());
}
#endif
// you can turn this on to debug some bounds issues
//GuiWidget.DebugBoundsUnderMouse = true;
}
GuiWidget.DefaultEnforceIntegerBounds = true;
if (ActiveTheme.Instance.DisplayMode == ActiveTheme.ApplicationDisplayType.Touchscreen)
{
TextWidget.GlobalPointSizeScaleRatio = 1.3;
}
using (new PerformanceTimer("Startup", "MainView"))
{
this.AddChild(ApplicationController.Instance.MainView);
}
this.MinimumSize = minSize;
this.Padding = new BorderDouble(0); //To be re-enabled once native borders are turned off
#if false // this is to test freeing gcodefile memory
Button test = new Button("test");
test.Click += (sender, e) =>
{
//MatterHackers.GCodeVisualizer.GCodeFile gcode = new GCodeVisualizer.GCodeFile();
//gcode.Load(@"C:\Users\lbrubaker\Downloads\drive assy.gcode");
SystemWindow window = new SystemWindow(100, 100);
window.ShowAsSystemWindow();
};
allControls.AddChild(test);
#endif
this.AnchorAll();
if (!forceSofwareRendering)
{
UseOpenGL = true;
}
string version = "1.4";
Title = "MatterControl {0}".FormatWith(version);
if (OemSettings.Instance.WindowTitleExtra != null && OemSettings.Instance.WindowTitleExtra.Trim().Length > 0)
{
Title = Title + " - {1}".FormatWith(version, OemSettings.Instance.WindowTitleExtra);
}
UiThread.RunOnIdle(CheckOnPrinter);
string desktopPosition = ApplicationSettings.Instance.get("DesktopPosition");
if (desktopPosition != null && desktopPosition != "")
{
string[] sizes = desktopPosition.Split(',');
//If the desktop position is less than -10,-10, override
int xpos = Math.Max(int.Parse(sizes[0]), -10);
int ypos = Math.Max(int.Parse(sizes[1]), -10);
DesktopPosition = new Point2D(xpos, ypos);
}
showWindow = true;
}
private MatterControlApplication(double width, double height, out bool showWindow)
: base(width, height)
{
Name = "MatterControl";
showWindow = false;
// set this at startup so that we can tell next time if it got set to true in close
UserSettings.Instance.Fields.StartCount = UserSettings.Instance.Fields.StartCount + 1;
this.commandLineArgs = Environment.GetCommandLineArgs();
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
bool forceSofwareRendering = false;
for (int currentCommandIndex = 0; currentCommandIndex < commandLineArgs.Length; currentCommandIndex++)
{
string command = commandLineArgs[currentCommandIndex];
string commandUpper = command.ToUpper();
switch (commandUpper)
{
case "TEST":
CheckKnownAssemblyConditionalCompSymbols();
return;
case "FORCE_SOFTWARE_RENDERING":
forceSofwareRendering = true;
GL.ForceSoftwareRendering();
break;
case "MHSERIAL_TO_ANDROID":
{
Dictionary <string, string> vidPid_NameDictionary = new Dictionary <string, string>();
string[] MHSerialLines = File.ReadAllLines(Path.Combine("..", "..", "StaticData", "Drivers", "MHSerial", "MHSerial.inf"));
foreach (string line in MHSerialLines)
{
if (line.Contains("=DriverInstall,"))
{
string name = Regex.Match(line, "%(.*).name").Groups[1].Value;
string vid = Regex.Match(line, "VID_(.*)&PID").Groups[1].Value;
string pid = Regex.Match(line, "PID_([0-9a-fA-F]+)").Groups[1].Value;
string vidPid = "{0},{1}".FormatWith(vid, pid);
if (!vidPid_NameDictionary.ContainsKey(vidPid))
{
vidPid_NameDictionary.Add(vidPid, name);
}
}
}
using (StreamWriter deviceFilter = new StreamWriter("deviceFilter.txt"))
{
using (StreamWriter serialPort = new StreamWriter("serialPort.txt"))
{
foreach (KeyValuePair <string, string> vidPid_Name in vidPid_NameDictionary)
{
string[] vidPid = vidPid_Name.Key.Split(',');
int vid = Int32.Parse(vidPid[0], System.Globalization.NumberStyles.HexNumber);
int pid = Int32.Parse(vidPid[1], System.Globalization.NumberStyles.HexNumber);
serialPort.WriteLine("customTable.AddProduct(0x{0:X4}, 0x{1:X4}, cdcDriverType); // {2}".FormatWith(vid, pid, vidPid_Name.Value));
deviceFilter.WriteLine("<!-- {2} -->\n<usb-device vendor-id=\"{0}\" product-id=\"{1}\" />".FormatWith(vid, pid, vidPid_Name.Value));
}
}
}
}
return;
case "CLEAR_CACHE":
AboutWidget.DeleteCacheData();
break;
case "SHOW_MEMORY":
ShowMemoryUsed = true;
break;
case "DO_GC_COLLECT_EVERY_DRAW":
ShowMemoryUsed = true;
DoCGCollectEveryDraw = true;
break;
case "CREATE_AND_SELECT_PRINTER":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
currentCommandIndex++;
string argument = commandLineArgs[currentCommandIndex];
string[] printerData = argument.Split(',');
if (printerData.Length >= 2)
{
Printer ActivePrinter = new Printer();
ActivePrinter.Name = "Auto: {0} {1}".FormatWith(printerData[0], printerData[1]);
ActivePrinter.Make = printerData[0];
ActivePrinter.Model = printerData[1];
if (printerData.Length == 3)
{
ActivePrinter.ComPort = printerData[2];
}
PrinterSetupStatus test = new PrinterSetupStatus(ActivePrinter);
test.LoadDefaultSliceSettings(ActivePrinter.Make, ActivePrinter.Model);
ActivePrinterProfile.Instance.ActivePrinter = ActivePrinter;
}
}
break;
case "CONNECT_TO_PRINTER":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
PrinterConnectionAndCommunication.Instance.ConnectToActivePrinter();
}
break;
case "START_PRINT":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
bool hasBeenRun = false;
currentCommandIndex++;
string fullPath = commandLineArgs[currentCommandIndex];
QueueData.Instance.RemoveAll();
if (!string.IsNullOrEmpty(fullPath))
{
string fileName = Path.GetFileNameWithoutExtension(fullPath);
QueueData.Instance.AddItem(new PrintItemWrapper(new PrintItem(fileName, fullPath)));
PrinterConnectionAndCommunication.Instance.CommunicationStateChanged.RegisterEvent((sender, e) =>
{
if (!hasBeenRun && PrinterConnectionAndCommunication.Instance.CommunicationState == PrinterConnectionAndCommunication.CommunicationStates.Connected)
{
hasBeenRun = true;
PrinterConnectionAndCommunication.Instance.PrintActivePartIfPossible();
}
}, ref unregisterEvent);
}
}
break;
case "SLICE_AND_EXPORT_GCODE":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
currentCommandIndex++;
string fullPath = commandLineArgs[currentCommandIndex];
QueueData.Instance.RemoveAll();
if (!string.IsNullOrEmpty(fullPath))
{
string fileName = Path.GetFileNameWithoutExtension(fullPath);
PrintItemWrapper printItemWrapper = new PrintItemWrapper(new PrintItem(fileName, fullPath));
QueueData.Instance.AddItem(printItemWrapper);
SlicingQueue.Instance.QueuePartForSlicing(printItemWrapper);
ExportPrintItemWindow exportForTest = new ExportPrintItemWindow(printItemWrapper);
exportForTest.ExportGcodeCommandLineUtility(fileName);
}
}
break;
}
if (MeshFileIo.ValidFileExtensions().Contains(Path.GetExtension(command).ToUpper()))
{
// If we are the only instance running then do nothing.
// Else send these to the running instance so it can load them.
}
}
//WriteTestGCodeFile();
#if !DEBUG
if (File.Exists("RunUnitTests.txt"))
#endif
{
#if IS_WINDOWS_FORMS
if (!Clipboard.IsInitialized)
{
Clipboard.SetSystemClipboard(new WindowsFormsClipboard());
}
#endif
// you can turn this on to debug some bounds issues
//GuiWidget.DebugBoundsUnderMouse = true;
}
GuiWidget.DefaultEnforceIntegerBounds = true;
if (ActiveTheme.Instance.DisplayMode == ActiveTheme.ApplicationDisplayType.Touchscreen)
{
TextWidget.GlobalPointSizeScaleRatio = 1.3;
}
this.AddChild(ApplicationController.Instance.MainView);
this.MinimumSize = minSize;
this.Padding = new BorderDouble(0); //To be re-enabled once native borders are turned off
#if false // this is to test freeing gcodefile memory
Button test = new Button("test");
test.Click += (sender, e) =>
{
//MatterHackers.GCodeVisualizer.GCodeFile gcode = new GCodeVisualizer.GCodeFile();
//gcode.Load(@"C:\Users\lbrubaker\Downloads\drive assy.gcode");
SystemWindow window = new SystemWindow(100, 100);
window.ShowAsSystemWindow();
};
allControls.AddChild(test);
#endif
this.AnchorAll();
if (!forceSofwareRendering)
{
UseOpenGL = true;
}
string version = "1.4";
Title = "MatterControl {0}".FormatWith(version);
if (OemSettings.Instance.WindowTitleExtra != null && OemSettings.Instance.WindowTitleExtra.Trim().Length > 0)
{
Title = Title + " - {1}".FormatWith(version, OemSettings.Instance.WindowTitleExtra);
}
UiThread.RunOnIdle(CheckOnPrinter);
string desktopPosition = ApplicationSettings.Instance.get("DesktopPosition");
if (desktopPosition != null && desktopPosition != "")
{
string[] sizes = desktopPosition.Split(',');
//If the desktop position is less than -10,-10, override
int xpos = Math.Max(int.Parse(sizes[0]), -10);
int ypos = Math.Max(int.Parse(sizes[1]), -10);
DesktopPosition = new Point2D(xpos, ypos);
}
showWindow = true;
}
private MatterControlApplication(double width, double height)
: base(width, height)
{
ApplicationSettings.Instance.set("HardwareHasCamera", "false");
Name = "MatterControl";
// set this at startup so that we can tell next time if it got set to true in close
UserSettings.Instance.Fields.StartCount = UserSettings.Instance.Fields.StartCount + 1;
this.commandLineArgs = Environment.GetCommandLineArgs();
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
for (int currentCommandIndex = 0; currentCommandIndex < commandLineArgs.Length; currentCommandIndex++)
{
string command = commandLineArgs[currentCommandIndex];
string commandUpper = command.ToUpper();
switch (commandUpper)
{
case "FORCE_SOFTWARE_RENDERING":
GL.HardwareAvailable = false;
break;
case "CLEAR_CACHE":
AboutWidget.DeleteCacheData(0);
break;
case "SHOW_MEMORY":
ShowMemoryUsed = true;
break;
case "DO_GC_COLLECT_EVERY_DRAW":
ShowMemoryUsed = true;
DoCGCollectEveryDraw = true;
break;
//case "CREATE_AND_SELECT_PRINTER":
// if (currentCommandIndex + 1 <= commandLineArgs.Length)
// {
// currentCommandIndex++;
// string argument = commandLineArgs[currentCommandIndex];
// string[] printerData = argument.Split(',');
// if (printerData.Length >= 2)
// {
// Printer ActivePrinter = new Printer();
// ActivePrinter.Name = "Auto: {0} {1}".FormatWith(printerData[0], printerData[1]);
// ActivePrinter.Make = printerData[0];
// ActivePrinter.Model = printerData[1];
// if (printerData.Length == 3)
// {
// ActivePrinter.ComPort = printerData[2];
// }
// PrinterSetupStatus test = new PrinterSetupStatus(ActivePrinter);
// test.LoadSettingsFromConfigFile(ActivePrinter.Make, ActivePrinter.Model);
// ActiveSliceSettings.Instance = ActivePrinter;
// }
// }
// break;
case "CONNECT_TO_PRINTER":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
PrinterConnectionAndCommunication.Instance.ConnectToActivePrinter();
}
break;
case "START_PRINT":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
bool hasBeenRun = false;
currentCommandIndex++;
string fullPath = commandLineArgs[currentCommandIndex];
QueueData.Instance.RemoveAll();
if (!string.IsNullOrEmpty(fullPath))
{
string fileName = Path.GetFileNameWithoutExtension(fullPath);
QueueData.Instance.AddItem(new PrintItemWrapper(new PrintItem(fileName, fullPath)));
PrinterConnectionAndCommunication.Instance.CommunicationStateChanged.RegisterEvent((sender, e) =>
{
if (!hasBeenRun && PrinterConnectionAndCommunication.Instance.CommunicationState == PrinterConnectionAndCommunication.CommunicationStates.Connected)
{
hasBeenRun = true;
PrinterConnectionAndCommunication.Instance.PrintActivePartIfPossible();
}
}, ref unregisterEvent);
}
}
break;
case "SLICE_AND_EXPORT_GCODE":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
currentCommandIndex++;
string fullPath = commandLineArgs[currentCommandIndex];
QueueData.Instance.RemoveAll();
if (!string.IsNullOrEmpty(fullPath))
{
string fileName = Path.GetFileNameWithoutExtension(fullPath);
PrintItemWrapper printItemWrapper = new PrintItemWrapper(new PrintItem(fileName, fullPath));
QueueData.Instance.AddItem(printItemWrapper);
SlicingQueue.Instance.QueuePartForSlicing(printItemWrapper);
ExportPrintItemWindow exportForTest = new ExportPrintItemWindow(printItemWrapper);
exportForTest.ExportGcodeCommandLineUtility(fileName);
}
}
break;
}
if (MeshFileIo.ValidFileExtensions().Contains(Path.GetExtension(command).ToUpper()))
{
// If we are the only instance running then do nothing.
// Else send these to the running instance so it can load them.
}
}
//WriteTestGCodeFile();
#if !DEBUG
if (File.Exists("RunUnitTests.txt"))
#endif
{
#if IS_WINDOWS_FORMS
if (!Clipboard.IsInitialized)
{
Clipboard.SetSystemClipboard(new WindowsFormsClipboard());
}
#endif
// you can turn this on to debug some bounds issues
//GuiWidget.DebugBoundsUnderMouse = true;
}
GuiWidget.DefaultEnforceIntegerBounds = true;
if (UserSettings.Instance.IsTouchScreen)
{
GuiWidget.DeviceScale = 1.3;
SystemWindow.ShareSingleOsWindow = true;
}
//GuiWidget.DeviceScale = 2;
using (new PerformanceTimer("Startup", "MainView"))
{
this.AddChild(ApplicationController.Instance.MainView);
}
this.MinimumSize = minSize;
this.Padding = new BorderDouble(0); //To be re-enabled once native borders are turned off
#if false // this is to test freeing gcodefile memory
Button test = new Button("test");
test.Click += (sender, e) =>
{
//MatterHackers.GCodeVisualizer.GCodeFile gcode = new GCodeVisualizer.GCodeFile();
//gcode.Load(@"C:\Users\lbrubaker\Downloads\drive assy.gcode");
SystemWindow window = new SystemWindow(100, 100);
window.ShowAsSystemWindow();
};
allControls.AddChild(test);
#endif
this.AnchorAll();
if (GL.HardwareAvailable)
{
UseOpenGL = true;
}
string version = "1.6";
Title = "MatterHackers: MatterControl {0}".FormatWith(version);
if (OemSettings.Instance.WindowTitleExtra != null && OemSettings.Instance.WindowTitleExtra.Trim().Length > 0)
{
Title = Title + " - {1}".FormatWith(version, OemSettings.Instance.WindowTitleExtra);
}
UiThread.RunOnIdle(CheckOnPrinter);
string desktopPosition = ApplicationSettings.Instance.get(ApplicationSettingsKey.DesktopPosition);
if (!string.IsNullOrEmpty(desktopPosition))
{
string[] sizes = desktopPosition.Split(',');
//If the desktop position is less than -10,-10, override
int xpos = Math.Max(int.Parse(sizes[0]), -10);
int ypos = Math.Max(int.Parse(sizes[1]), -10);
DesktopPosition = new Point2D(xpos, ypos);
}
else
{
DesktopPosition = new Point2D(-1, -1);
}
this.Maximized = ApplicationSettings.Instance.get(ApplicationSettingsKey.MainWindowMaximized) == "true";
}
private MatterControlApplication(double width, double height)
: base(width, height)
{
ApplicationSettings.Instance.set("HardwareHasCamera", "false");
Name = "MatterControl";
// set this at startup so that we can tell next time if it got set to true in close
UserSettings.Instance.Fields.StartCount = UserSettings.Instance.Fields.StartCount + 1;
this.commandLineArgs = Environment.GetCommandLineArgs();
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
for (int currentCommandIndex = 0; currentCommandIndex < commandLineArgs.Length; currentCommandIndex++)
{
string command = commandLineArgs[currentCommandIndex];
string commandUpper = command.ToUpper();
switch (commandUpper)
{
case "FORCE_SOFTWARE_RENDERING":
GL.HardwareAvailable = false;
break;
case "CLEAR_CACHE":
AboutWidget.DeleteCacheData(0);
break;
case "SHOW_MEMORY":
ShowMemoryUsed = true;
break;
case "DO_GC_COLLECT_EVERY_DRAW":
ShowMemoryUsed = true;
DoCGCollectEveryDraw = true;
break;
//case "CREATE_AND_SELECT_PRINTER":
// if (currentCommandIndex + 1 <= commandLineArgs.Length)
// {
// currentCommandIndex++;
// string argument = commandLineArgs[currentCommandIndex];
// string[] printerData = argument.Split(',');
// if (printerData.Length >= 2)
// {
// Printer ActivePrinter = new Printer();
// ActivePrinter.Name = "Auto: {0} {1}".FormatWith(printerData[0], printerData[1]);
// ActivePrinter.Make = printerData[0];
// ActivePrinter.Model = printerData[1];
// if (printerData.Length == 3)
// {
// ActivePrinter.ComPort = printerData[2];
// }
// PrinterSetupStatus test = new PrinterSetupStatus(ActivePrinter);
// test.LoadSettingsFromConfigFile(ActivePrinter.Make, ActivePrinter.Model);
// ActiveSliceSettings.Instance = ActivePrinter;
// }
// }
// break;
case "CONNECT_TO_PRINTER":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
PrinterConnectionAndCommunication.Instance.ConnectToActivePrinter();
}
break;
case "START_PRINT":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
bool hasBeenRun = false;
currentCommandIndex++;
string fullPath = commandLineArgs[currentCommandIndex];
QueueData.Instance.RemoveAll();
if (!string.IsNullOrEmpty(fullPath))
{
string fileName = Path.GetFileNameWithoutExtension(fullPath);
QueueData.Instance.AddItem(new PrintItemWrapper(new PrintItem(fileName, fullPath)));
PrinterConnectionAndCommunication.Instance.CommunicationStateChanged.RegisterEvent((sender, e) =>
{
if (!hasBeenRun && PrinterConnectionAndCommunication.Instance.CommunicationState == PrinterConnectionAndCommunication.CommunicationStates.Connected)
{
hasBeenRun = true;
PrinterConnectionAndCommunication.Instance.PrintActivePartIfPossible();
}
}, ref unregisterEvent);
}
}
break;
case "SLICE_AND_EXPORT_GCODE":
if (currentCommandIndex + 1 <= commandLineArgs.Length)
{
currentCommandIndex++;
string fullPath = commandLineArgs[currentCommandIndex];
QueueData.Instance.RemoveAll();
if (!string.IsNullOrEmpty(fullPath))
{
string fileName = Path.GetFileNameWithoutExtension(fullPath);
PrintItemWrapper printItemWrapper = new PrintItemWrapper(new PrintItem(fileName, fullPath));
QueueData.Instance.AddItem(printItemWrapper);
SlicingQueue.Instance.QueuePartForSlicing(printItemWrapper);
ExportPrintItemWindow exportForTest = new ExportPrintItemWindow(printItemWrapper);
exportForTest.ExportGcodeCommandLineUtility(fileName);
}
}
break;
}
if (MeshFileIo.ValidFileExtensions().Contains(Path.GetExtension(command).ToUpper()))
{
// If we are the only instance running then do nothing.
// Else send these to the running instance so it can load them.
}
}
//WriteTestGCodeFile();
#if !DEBUG
if (File.Exists("RunUnitTests.txt"))
#endif
{
#if IS_WINDOWS_FORMS
if (!Clipboard.IsInitialized)
{
Clipboard.SetSystemClipboard(new WindowsFormsClipboard());
}
#endif
// you can turn this on to debug some bounds issues
//GuiWidget.DebugBoundsUnderMouse = true;
}
GuiWidget.DefaultEnforceIntegerBounds = true;
if (UserSettings.Instance.DisplayMode == ApplicationDisplayType.Touchscreen)
{
GuiWidget.DeviceScale = 1.3;
}
//GuiWidget.DeviceScale = 2;
using (new PerformanceTimer("Startup", "MainView"))
{
this.AddChild(ApplicationController.Instance.MainView);
}
this.MinimumSize = minSize;
this.Padding = new BorderDouble(0); //To be re-enabled once native borders are turned off
#if false // this is to test freeing gcodefile memory
Button test = new Button("test");
test.Click += (sender, e) =>
{
//MatterHackers.GCodeVisualizer.GCodeFile gcode = new GCodeVisualizer.GCodeFile();
//gcode.Load(@"C:\Users\lbrubaker\Downloads\drive assy.gcode");
SystemWindow window = new SystemWindow(100, 100);
window.ShowAsSystemWindow();
};
allControls.AddChild(test);
#endif
this.AnchorAll();
if (GL.HardwareAvailable)
{
UseOpenGL = true;
}
string version = "1.6";
Title = "MatterHackers: MatterControl {0}".FormatWith(version);
if (OemSettings.Instance.WindowTitleExtra != null && OemSettings.Instance.WindowTitleExtra.Trim().Length > 0)
{
Title = Title + " - {1}".FormatWith(version, OemSettings.Instance.WindowTitleExtra);
}
UiThread.RunOnIdle(CheckOnPrinter);
string desktopPosition = ApplicationSettings.Instance.get(ApplicationSettingsKey.DesktopPosition);
if (desktopPosition != null && desktopPosition != "")
{
string[] sizes = desktopPosition.Split(',');
//If the desktop position is less than -10,-10, override
int xpos = Math.Max(int.Parse(sizes[0]), -10);
int ypos = Math.Max(int.Parse(sizes[1]), -10);
DesktopPosition = new Point2D(xpos, ypos);
}
}
