void Start()
{
INoise perlin = new PerlinNoise(seed, 2.0f);
FractalNoise fractal = new FractalNoise(perlin, 3, 1.0f);
//Set the mode used to create the mesh.
//Cubes is faster and creates less verts, tetrahedrons is slower and creates more verts but better represents the mesh surface.
Marching marching = null;
if (mode == MARCHING_MODE.TETRAHEDRON)
{
marching = new MarchingTertrahedron();
}
else
{
marching = new MarchingCubes();
}
//Surface is the value that represents the surface of mesh
//For example the perlin noise has a range of -1 to 1 so the mid point is where we want the surface to cut through.
//The target value does not have to be the mid point it can be any value with in the range.
marching.Surface = 0.0f;
//The size of voxel array.
int width = 32;
int height = 32;
int length = 10;
float[] voxels = new float[width * height * length];
//Fill voxels with values. Im using perlin noise but any method to create voxels will work.
for (int x = 0; x < width; x++)
{
for (int y = 0; y < height; y++)
{
for (int z = 0; z < length; z++)
{
float fx = x / (width - 1.0f);
float fy = y / (height - 1.0f);
float fz = z / (length - 1.0f);
int idx = x + y * width + z * width * height;
voxels[idx] = fractal.Sample3D(fx, fy, fz);
}
}
}
List <Vector3> verts = new List <Vector3>();
List <int> indices = new List <int>();
//The mesh produced is not optimal. There is one vert for each index.
//Would need to weld vertices for better quality mesh.
marching.Generate(voxels, width, height, length, verts, indices);
//A mesh in unity can only be made up of 65000 verts.
//Need to split the verts between multiple meshes.
int maxVertsPerMesh = 30000; //must be divisible by 3, ie 3 verts == 1 triangle
int numMeshes = verts.Count / maxVertsPerMesh + 1;
for (int i = 0; i < numMeshes; i++)
{
List <Vector3> splitVerts = new List <Vector3>();
List <int> splitIndices = new List <int>();
for (int j = 0; j < maxVertsPerMesh; j++)
{
int idx = i * maxVertsPerMesh + j;
if (idx < verts.Count)
{
splitVerts.Add(verts[idx]);
splitIndices.Add(j);
}
}
if (splitVerts.Count == 0)
{
continue;
}
Mesh mesh = new Mesh();
mesh.SetVertices(splitVerts);
mesh.SetTriangles(splitIndices, 0);
mesh.RecalculateBounds();
mesh.RecalculateNormals();
GameObject go = new GameObject("Mesh");
go.transform.parent = transform;
go.AddComponent <MeshFilter>();
go.AddComponent <MeshRenderer>();
go.GetComponent <Renderer>().material = m_material;
go.GetComponent <MeshFilter>().mesh = mesh;
go.transform.localPosition = new Vector3(-width / 2, -height / 2, -length / 2);
meshes.Add(go);
}
}
public void CreateNewSurface(float[] voxels, MARCHING_MODE mode, float iso, int width, int height, int length)
{
// Reset meshes
foreach (GameObject lgo in meshes)
{
Destroy(lgo);
}
meshes.Clear();
//Set the mode used to create the mesh.
//Cubes is faster and creates less verts, tetrahedrons is slower and creates more verts but better represents the mesh surface.
//print("generating surface..");
marching = null;
if (mode == MARCHING_MODE.Tetrahedron)
{
marching = new MarchingTertrahedron();
}
else if (mode == MARCHING_MODE.Cubes)
{
marching = new MarchingCubes();
}
else
{
marching = new NaiveMarchingTetrahedron();
}
//Surface is the value that represents the surface of mesh
//For example the perlin noise has a range of -1 to 1 so the mid point is where we want the surface to cut through.
//The target value does not have to be the mid point it can be any value with in the range.
marching.Surface = iso;
verts = new List <Vector3>();
indices = new List <int>();
//The mesh produced is not optimal. There is one vert for each index.
//Would need to weld vertices for better quality mesh.
print("w:" + width + " h:" + height + " l:" + length);
marching.Generate(voxels, width, height, length, verts, indices);
print("marching alg complete. Creating meshes from " + verts.Count + " vertices...");
//A mesh in unity can only be made up of 65000 verts.
//Need to split the verts between multiple meshes.
int numMeshes = verts.Count / _maxVertsPerMesh + 1;
for (int i = 0; i < numMeshes; i++)
{
List <Vector3> splitVerts = new List <Vector3>();
List <int> splitIndices = new List <int>();
for (int j = 0; j < _maxVertsPerMesh; j++)
{
int idx = i * _maxVertsPerMesh + j;
if (idx < verts.Count)
{
splitVerts.Add(verts[idx]);
splitIndices.Add(j);
}
}
if (splitVerts.Count == 0)
{
continue;
}
Mesh mesh = new Mesh();
mesh.SetVertices(splitVerts);
if (pointmode)
{
mesh.SetIndices(splitIndices.ToArray(), MeshTopology.Points, 0);
}
else
{
mesh.SetTriangles(splitIndices, 0);
mesh.RecalculateNormals();
}
print("triangle count: " + splitIndices.Count);
mesh.RecalculateBounds();
if (disableBackfaceCulling)
{
DisableBackfaceCulling(mesh);
}
go = new GameObject("Mesh");
go.transform.parent = transform;
go.AddComponent <MeshFilter>();
go.AddComponent <MeshRenderer>();
go.GetComponent <Renderer>().material = m_material;
go.GetComponent <MeshFilter>().mesh = mesh;
go.transform.localScale = new Vector3(1f, 1f, 1f);
go.transform.localPosition = new Vector3(-width / 2f, -height / 2f, -length / 2f);
meshes.Add(go);
print("surfaces generated!");
}
}
void Generate()
{
//INoise perlin = new PerlinNoise(seed, 2.0f);
//FractalNoise fractal = new FractalNoise(perlin, 3, 1.0f);
//Set the mode used to create the mesh.
//Cubes is faster and creates less verts, tetrahedrons is slower and creates more verts but better represents the mesh surface.
//The size of voxel array.
if (mode == MARCHING_MODE.TETRAHEDRON)
{
marching = new MarchingTertrahedron();
}
else
{
marching = new MarchingCubes();
}
//Surface is the value that represents the surface of mesh
//For example the perlin noise has a range of -1 to 1 so the mid point is where we want the surface to cut through.
//The target value does not have to be the mid point it can be any value with in the range.
marching.Surface = 0.0f;
if (voxels == null)
{
voxels = new Voxel[width * height * length];
//Fill voxels with values. Im using perlin noise but any method to create voxels will work.
for (int x = 0; x < width; x++)
{
for (int y = 0; y < height; y++)
{
for (int z = 0; z < length; z++)
{
float voxel = 0;
float distance = Vector3.Distance(new Vector3(x + 0.5f, y + 0.5f, z + 0.5f), new Vector3((float)width / 2, (float)height / 2, (float)length / 2));
voxel = -Mathf.Clamp(((0.7f / distance) * 2 - 1), -0.3f, 0.3f);
float fx = x;
float fy = y;
float fz = z;
int idx = x + y * width + z * width * height;
voxels[idx] = new Voxel(voxel, 0);
}
}
}
}
List <Vector3> verts = new List <Vector3>();
List <int> indices = new List <int>();
float[] chunkVox = new float[voxels.Length];
for (int i = 0; i < voxels.Length; i++)
{
chunkVox[i] = voxels[i].value;
}
//The mesh produced is not optimal. There is one vert for each index.
//Would need to weld vertices for better quality mesh.
marching.Generate(chunkVox, width, height, length, verts, indices);
//A mesh in unity can only be made up of 65000 verts.
//Need to split the verts between multiple meshes.
int maxVertsPerMesh = 60000; //must be divisible by 3, ie 3 verts == 1 triangle
//int numMeshes = verts.Count / maxVertsPerMesh + 1;
if (verts.Count == 0 || verts.Count > maxVertsPerMesh)
{
return;
}
// for (int i = 0; i < numMeshes; i++)
// {
// print(numMeshes);
// List<Vector3> splitVerts = new List<Vector3>();
// List<int> splitIndices = new List<int>();
// for (int j = 0; j < maxVertsPerMesh; j++)
// {
// int idx = i * maxVertsPerMesh + j;
// if (idx < verts.Count)
// {
// splitVerts.Add(verts[idx]);
// splitIndices.Add(j);
// }
// }
// List<int> splitIndices = new List<int>();
List <List <int> > subIndices = new List <List <int> >();
subIndices.Add(indices);
for (int i = 0; i < verts.Count; i++)
{
verts[i] *= scale;
}
Action createMesh = () => {
foreach (Transform child in transform)
{
Destroy(child.gameObject);
}
GameObject go = meshGeneration.genMesh(verts, subIndices, m_materials, transform);
// Mesh mesh = new Mesh();
// mesh.SetVertices(verts);
// mesh.SetTriangles(indices, 0);
// mesh.RecalculateBounds();
// mesh.RecalculateNormals();
// GameObject go = new GameObject("Mesh");
// go.transform.parent = transform;
// go.AddComponent<MeshFilter>();
// go.AddComponent<MeshRenderer>();
// go.GetComponent<Renderer>().material = m_material;
// go.GetComponent<MeshFilter>().mesh = mesh;
// go.AddComponent<MeshCollider>();
meshes.Add(go);
};
actions.Add(createMesh);
// }
}
void Start()
{
INoise perlin = new PerlinNoise(seed, 2.0f);
FractalNoise fractal = new FractalNoise(perlin, 3, 1.0f);
//Set the mode used to create the mesh.
//Cubes is faster and creates less verts, tetrahedrons is slower and creates more verts but better represents the mesh surface.
Marching marching = null;
if (mode == MARCHING_MODE.TETRAHEDRON)
{
marching = new MarchingTertrahedron();
}
else
{
marching = new MarchingCubes();
}
//Surface is the value that represents the surface of mesh
//For example the perlin noise has a range of -1 to 1 so the mid point is where we want the surface to cut through.
//The target value does not have to be the mid point it can be any value with in the range.
marching.Surface = 0.0f;
//The size of voxel array.
int width = 32;
int height = 32;
int length = 32;
float[] voxels = new float[width * height * length];
//Fill voxels with values. Im using perlin noise but any method to create voxels will work.
for (int x = 0; x < width; x++)
{
for (int y = 0; y < height; y++)
{
for (int z = 0; z < length; z++)
{
float fx = x / (width - 1.0f);
float fy = y / (height - 1.0f);
float fz = z / (length - 1.0f);
int idx = x + y * width + z * width * height;
voxels[idx] = fractal.Sample3D(fx, fy, fz);
}
}
}
List <Vector3> verts = new List <Vector3>();
List <int> indices = new List <int>();
System.Diagnostics.Stopwatch measure = new System.Diagnostics.Stopwatch();
measure.Start();
marching.Generate(voxels, width, height, length, verts, indices);
verts = MeshUtils.WeldVertices(verts, indices);
measure.Stop();
Debug.Log(string.Format("Time elapsed: {0}", measure.Elapsed));
Mesh mesh = new Mesh();
mesh.indexFormat = UnityEngine.Rendering.IndexFormat.UInt32;
mesh.SetVertices(verts);
mesh.SetTriangles(indices, 0);
mesh.RecalculateBounds();
mesh.RecalculateNormals();
GameObject go = new GameObject("Mesh");
go.transform.parent = transform;
go.AddComponent <MeshFilter>();
go.AddComponent <MeshRenderer>();
go.GetComponent <Renderer>().material = m_material;
go.GetComponent <MeshFilter>().mesh = mesh;
go.transform.localPosition = new Vector3(-width / 2, -height / 2, -length / 2);
}