/// <summary>
///
/// </summary>
/// <param name="outstream"></param>
public virtual void Write(StreamWriter outstream)
{
for (IEnumerator it = GetEnumerator(); it.MoveNext();)
{
EdgeEnd e = (EdgeEnd)it.Current;
e.Write(outstream);
}
}
/// <summary>
///
/// </summary>
private void ComputeEdgeEndLabels()
{
// Compute edge label for each EdgeEnd
for (IEnumerator it = GetEnumerator(); it.MoveNext();)
{
EdgeEnd ee = (EdgeEnd)it.Current;
ee.ComputeLabel();
}
}
/// <summary>
/// Insert an EdgeEnd into the map, and clear the edgeList cache,
/// since the list of edges has now changed.
/// </summary>
/// <param name="e"></param>
/// <param name="obj"></param>
protected void InsertEdgeEnd(EdgeEnd e, object obj)
{
// Diego Guidi says: i have inserted this line because if i try to add an object already present
// in the list, a System.ArgumentException was thrown.
if (edgeMap.Contains(e))
{
return;
}
edgeMap.Add(e, obj);
edgeList = null; // edge list has changed - clear the cache
}
/// <summary>
/// Returns the EdgeEnd which has edge e as its base edge
/// (MD 18 Feb 2002 - this should return a pair of edges).
/// </summary>
/// <param name="e"></param>
/// <returns> The edge, if found <c>null</c> if the edge was not found.</returns>
public virtual EdgeEnd FindEdgeEnd(Edge e)
{
for (IEnumerator i = EdgeEnds.GetEnumerator(); i.MoveNext();)
{
EdgeEnd ee = (EdgeEnd)i.Current;
if (ee.Edge == e)
{
return(ee);
}
}
return(null);
}
/// <summary>
///
/// </summary>
/// <param name="eSearch"></param>
/// <returns></returns>
public virtual int FindIndex(EdgeEnd eSearch)
{
GetEnumerator(); // force edgelist to be computed
for (int i = 0; i < edgeList.Count; i++)
{
EdgeEnd e = (EdgeEnd)edgeList[i];
if (e == eSearch)
{
return(i);
}
}
return(-1);
}
/// <summary>
///
/// </summary>
/// <param name="ee"></param>
/// <returns></returns>
public virtual EdgeEnd GetNextCW(EdgeEnd ee)
{
IList temp = Edges;
temp = null; // Hack for calling property
int i = edgeList.IndexOf(ee);
int iNextCW = i - 1;
if (i == 0)
{
iNextCW = edgeList.Count - 1;
}
return((EdgeEnd)edgeList[iNextCW]);
}
/// <summary>
/// Implements the total order relation:
/// a has a greater angle with the positive x-axis than b.
/// Using the obvious algorithm of simply computing the angle is not robust,
/// since the angle calculation is obviously susceptible to roundoff.
/// A robust algorithm is:
/// - first compare the quadrant. If the quadrants
/// are different, it it trivial to determine which vector is "greater".
/// - if the vectors lie in the same quadrant, the computeOrientation function
/// can be used to decide the relative orientation of the vectors.
/// </summary>
/// <param name="e"></param>
public virtual int CompareDirection(EdgeEnd e)
{
if (dx == e.dx && dy == e.dy)
{
return(0);
}
// if the rays are in different quadrants, determining the ordering is trivial
if (quadrant > e.quadrant)
{
return(1);
}
if (quadrant < e.quadrant)
{
return(-1);
}
// vectors are in the same quadrant - check relative orientation of direction vectors
// this is > e if it is CCW of e
return(CGAlgorithms.ComputeOrientation(e.p0, e.p1, p1));
}
/// <summary>
///
/// </summary>
/// <param name="geomIndex"></param>
/// <returns></returns>
private bool CheckAreaLabelsConsistent(int geomIndex)
{
// Since edges are stored in CCW order around the node,
// As we move around the ring we move from the right to the left side of the edge
IList edges = Edges;
// if no edges, trivially consistent
if (edges.Count <= 0)
{
return(true);
}
// initialize startLoc to location of last Curve side (if any)
int lastEdgeIndex = edges.Count - 1;
Label startLabel = ((EdgeEnd)edges[lastEdgeIndex]).Label;
Locations startLoc = startLabel.GetLocation(geomIndex, Positions.Left);
Assert.IsTrue(startLoc != Locations.Null, "Found unlabelled area edge");
Locations currLoc = startLoc;
for (IEnumerator it = GetEnumerator(); it.MoveNext();)
{
EdgeEnd e = (EdgeEnd)it.Current;
Label label = e.Label;
// we assume that we are only checking a area
Assert.IsTrue(label.IsArea(geomIndex), "Found non-area edge");
Locations leftLoc = label.GetLocation(geomIndex, Positions.Left);
Locations rightLoc = label.GetLocation(geomIndex, Positions.Right);
// check that edge is really a boundary between inside and outside!
if (leftLoc == rightLoc)
{
return(false);
}
// check side location conflict
if (rightLoc != currLoc)
{
return(false);
}
currLoc = leftLoc;
}
return(true);
}
/// <summary>
/// Compute the labelling for all dirEdges in this star, as well
/// as the overall labelling.
/// </summary>
/// <param name="geom"></param>
public override void ComputeLabelling(GeometryGraph[] geom)
{
base.ComputeLabelling(geom);
// determine the overall labelling for this DirectedEdgeStar
// (i.e. for the node it is based at)
label = new Label(Locations.Null);
IEnumerator it = GetEnumerator();
while (it.MoveNext())
{
EdgeEnd ee = (EdgeEnd)it.Current;
Edge e = ee.Edge;
Label eLabel = e.Label;
for (int i = 0; i < 2; i++)
{
Locations eLoc = eLabel.GetLocation(i);
if (eLoc == Locations.Interior || eLoc == Locations.Boundary)
{
label.SetLocation(i, Locations.Interior);
}
}
}
}
/// <summary> /// Insert a EdgeEnd into this EdgeEndStar. /// </summary> /// <param name="e"></param> abstract public void Insert(EdgeEnd e);
/// <summary>
///
/// </summary>
/// <param name="geomIndex"></param>
public virtual void PropagateSideLabels(int geomIndex)
{
// Since edges are stored in CCW order around the node,
// As we move around the ring we move from the right to the left side of the edge
Locations startLoc = Locations.Null;
// initialize loc to location of last Curve side (if any)
for (IEnumerator it = GetEnumerator(); it.MoveNext();)
{
EdgeEnd e = (EdgeEnd)it.Current;
Label label = e.Label;
if (label.IsArea(geomIndex) && label.GetLocation(geomIndex, Positions.Left) != Locations.Null)
{
startLoc = label.GetLocation(geomIndex, Positions.Left);
}
}
// no labelled sides found, so no labels to propagate
if (startLoc == Locations.Null)
{
return;
}
Locations currLoc = startLoc;
for (IEnumerator it = GetEnumerator(); it.MoveNext();)
{
EdgeEnd e = (EdgeEnd)it.Current;
Label label = e.Label;
// set null On values to be in current location
if (label.GetLocation(geomIndex, Positions.On) == Locations.Null)
{
label.SetLocation(geomIndex, Positions.On, currLoc);
}
// set side labels (if any)
// if (label.IsArea()) //ORIGINAL
if (label.IsArea(geomIndex))
{
Locations leftLoc = label.GetLocation(geomIndex, Positions.Left);
Locations rightLoc = label.GetLocation(geomIndex, Positions.Right);
// if there is a right location, that is the next location to propagate
if (rightLoc != Locations.Null)
{
if (rightLoc != currLoc)
{
throw new TopologyException("side location conflict", e.Coordinate);
}
if (leftLoc == Locations.Null)
{
Assert.ShouldNeverReachHere("found single null side (at " + e.Coordinate + ")");
}
currLoc = leftLoc;
}
else
{
/* RHS is null - LHS must be null too.
* This must be an edge from the other point, which has no location
* labelling for this point. This edge must lie wholly inside or outside
* the other point (which is determined by the current location).
* Assign both sides to be the current location.
*/
Assert.IsTrue(label.GetLocation(geomIndex, Positions.Left) == Locations.Null, "found single null side");
label.SetLocation(geomIndex, Positions.Right, currLoc);
label.SetLocation(geomIndex, Positions.Left, currLoc);
}
}
}
}
/// <summary>
///
/// </summary>
/// <param name="geom"></param>
public virtual void ComputeLabelling(GeometryGraph[] geom)
{
ComputeEdgeEndLabels();
// Propagate side labels around the edges in the star
// for each parent Geometry
PropagateSideLabels(0);
PropagateSideLabels(1);
/*
* If there are edges that still have null labels for a point
* this must be because there are no area edges for that point incident on this node.
* In this case, to label the edge for that point we must test whether the
* edge is in the interior of the point.
* To do this it suffices to determine whether the node for the edge is in the interior of an area.
* If so, the edge has location Interior for the point.
* In all other cases (e.g. the node is on a line, on a point, or not on the point at all) the edge
* has the location Exterior for the point.
*
* Note that the edge cannot be on the Boundary of the point, since then
* there would have been a parallel edge from the Geometry at this node also labelled Boundary
* and this edge would have been labelled in the previous step.
*
* This code causes a problem when dimensional collapses are present, since it may try and
* determine the location of a node where a dimensional collapse has occurred.
* The point should be considered to be on the Exterior
* of the polygon, but locate() will return Interior, since it is passed
* the original Geometry, not the collapsed version.
*
* If there are incident edges which are Line edges labelled Boundary,
* then they must be edges resulting from dimensional collapses.
* In this case the other edges can be labelled Exterior for this Geometry.
*
* MD 8/11/01 - NOT True! The collapsed edges may in fact be in the interior of the Geometry,
* which means the other edges should be labelled Interior for this Geometry.
* Not sure how solve this... Possibly labelling needs to be split into several phases:
* area label propagation, symLabel merging, then finally null label resolution.
*/
bool[] hasDimensionalCollapseEdge = { false, false };
for (IEnumerator it = GetEnumerator(); it.MoveNext();)
{
EdgeEnd e = (EdgeEnd)it.Current;
Label label = e.Label;
for (int geomi = 0; geomi < 2; geomi++)
{
if (label.IsLine(geomi) && label.GetLocation(geomi) == Locations.Boundary)
{
hasDimensionalCollapseEdge[geomi] = true;
}
}
}
for (IEnumerator it = GetEnumerator(); it.MoveNext();)
{
EdgeEnd e = (EdgeEnd)it.Current;
Label label = e.Label;
for (int geomi = 0; geomi < 2; geomi++)
{
if (label.IsAnyNull(geomi))
{
Locations loc = Locations.Null;
if (hasDimensionalCollapseEdge[geomi])
{
loc = Locations.Exterior;
}
else
{
ICoordinate p = e.Coordinate;
loc = GetLocation(geomi, p, geom);
}
label.SetAllLocationsIfNull(geomi, loc);
}
}
}
}
/// <summary>
///
/// </summary>
/// <param name="obj"></param>
/// <returns></returns>
public virtual int CompareTo(object obj)
{
EdgeEnd e = (EdgeEnd)obj;
return(CompareDirection(e));
}
/// <summary>
/// Insert a directed edge in the list.
/// </summary>
/// <param name="ee"></param>
public override void Insert(EdgeEnd ee)
{
DirectedEdge de = (DirectedEdge)ee;
InsertEdgeEnd(de, de);
}
/// <summary>
///
/// </summary>
/// <param name="e"></param>
public virtual void Add(EdgeEnd e)
{
nodes.Add(e);
edgeEndList.Add(e);
}
/// <summary>
/// Add the edge to the list of edges at this node.
/// </summary>
/// <param name="e"></param>
public virtual void Add(EdgeEnd e)
{
// Assert: start pt of e is equal to node point
edges.Insert(e);
e.Node = this;
}