private void cmdMakeAlign_Click(object sender, EventArgs e)
{
BaseObjs.acadActivate();
bool addCurves = false;
if (cbxAddCurves.Checked)
{
addCurves = true;
}
nameLayer = string.Format("{0}-{1}-{2}", tbxType.Text, cbxLineLat.SelectedItem.ToString().ToUpper(), tbxIndex.Text);
idLayer = Layer.manageLayers(nameLayer);
nameStyle = cbxAlignStyle.SelectedItem.ToString();
nameStyleLabel = cbxAlignLabelSetStyles.SelectedItem.ToString();
string nameAlign = MNP_Align.makeAlign(nameLayer, nameLayer, nameStyle, nameStyleLabel, addCurves);
ToolStripStatusLabel1.Text = string.Format("ACTIVE ALIGNMENT: {0}", nameAlign);
int idx = 0;
string index = tbxIndex.Text;
if (index.isInteger(out idx))
{
idx += 1;
index = idx.ToString();
}
else
{
index.getStringIncrement();
}
tbxIndex.Text = index;
}
private void cmdEdit_Click(object sender, EventArgs e)
{
MNP_Align.editAlign(idAlign);
}
private void cmdAddCurve_Click(object sender, EventArgs e)
{
MNP_Align.insertCurve(idAlign);
this.Hide();
}
private void cmdUpdate_Click(object sender, EventArgs e)
{
Control cntrl;
ControlCollection cntrls = (ControlCollection)this.Controls;
List <AlgnEntData> algnData = new List <AlgnEntData>();
int k = cntrls.Count;
k = (k - 9) / 1 - 1;
Object[,] varData = new object[k, 6];
for (int i = 0; i < cntrls.Count; i++)
{
cntrl = cntrls[i];
if (cntrl.Name.Contains("lbl"))
{
int id = int.Parse(cntrl.Name.Substring(4, 1));
int idx = id + 2;
varData[id, idx] = cntrl.Text;
}
}
AlgnEntData aData;
for (int i = 0; i < k; i++)
{
aData = new AlgnEntData();
aData.ID = int.Parse(varData[i, 1].ToString());
aData.Type = varData[i, 2].ToString();
aData.StaBeg = double.Parse(varData[i, 3].ToString());
aData.StaEnd = double.Parse(varData[i, 4].ToString());
aData.Length = double.Parse(varData[i, 5].ToString());
aData.Radius = double.Parse(varData[i, 6].ToString());
algnData.Add(aData);
}
Alignment align = (Alignment)idAlign.getEnt();
AlignmentEntityCollection ents = align.Entities;
bool changed = false;
for (int i = 0; i < ents.Count; i++)
{
AlignmentEntity ent = ents[i];
if (ent.EntityType == AlignmentEntityType.Arc)
{
if (algnData[1].Radius == 0)
{
ents.Remove(ent);
changed = true;
}
}
else
{
AlignmentArc arc = (AlignmentArc)ent;
if (!arc.Radius.Equals(algnData[i].Radius))
{
arc.Radius = algnData[i].Radius;
changed = true;
}
}
if (changed)
{
this.Close();
MNP_Align.editAlign(align.ObjectId);
}
}
}
makePipeNetwork(ObjectId idAlign, string nameNetwork, string pipeType)
{
string pntDesc = fMNP.pntDesc;
Point3d pnt3dPick = Pub.pnt3dO;
if (idAlign == ObjectId.Null)
{
Autodesk.AutoCAD.DatabaseServices.Entity ent = Select.selectEntity(typeof(Alignment), "Select Alignment: ", "Selected object was not an alignment. Try again: ", out pnt3dPick);
idAlign = ent.ObjectId;
}
Network net = null;
ObjectIdCollection ids = CivilApplication.ActiveDocument.GetPipeNetworkIds();
ObjectId idNet = ObjectId.Null;
if (ids.Count == 0)
{
idNet = Network.Create(CivilApplication.ActiveDocument, ref nameNetwork);
}
else
{
for (int i = 0; i < ids.Count; i++)
{
net = (Network)ids[i].getEnt();
//if (net.Name == nameNetwork){
// string index = Align.getAlignIndex(nameNetwork);
// nameNetwork = string.Format("{0}-{1}", nameNetwork, index);
// break;
//}
}
idNet = Network.Create(CivilApplication.ActiveDocument, ref nameNetwork);
}
bool exists = false;
Alignment align = (Alignment)idAlign.getEnt();
AlignmentEntityCollection ents = align.Entities;
TinSurface tinSurfDE = Surf.getTinSurface("CPNT-ON", out exists);
List <AlgnEntData> algnData = MNP_Align.sortAlignEnts(align);
List <string> hPipe = new List <string>();
List <ObjectId> idsCgPnt = new List <ObjectId>();
ObjectId idPipe, idPipeSize, idStruct, idStructSize;
using (Transaction tr = BaseObjs.startTransactionDb())
{
net = (Network)tr.GetObject(idNet, OpenMode.ForWrite);
net.ReferenceAlignmentId = idAlign;
net.ReferenceSurfaceId = Surf.getTinSurface("CPNT-ON", out exists).ObjectId;
ObjectId idPartsList = CivilApplication.ActiveDocument.Styles.PartsListSet["Standard"];
PartsList partsList = (PartsList)tr.GetObject(idPartsList, OpenMode.ForRead);
idPipe = partsList["Concrete Pipe"];
PartFamily partFamily = (PartFamily)tr.GetObject(idPipe, OpenMode.ForWrite);
idPipeSize = partFamily[0];
PartSize partSize = (PartSize)tr.GetObject(idPipeSize, OpenMode.ForRead);
PartDataRecord pdr = partSize.SizeDataRecord;
PartDataField[] pdf = pdr.GetAllDataFields();
for (int i = 0; i < pdf.Length; i++)
{
System.Diagnostics.Debug.Print(string.Format("{0}: {1}", pdf[i].Description, pdf[i].Value.ToString()));
}
idStruct = partsList["Rectangular Structure Slab Top Rectangular Frame"];
partFamily = (PartFamily)tr.GetObject(idStruct, OpenMode.ForWrite);
idStructSize = partFamily[0];
double depth = -6, slope = 0, dZ = 0, top = 0;
double diam = double.Parse(pdf[0].Value.ToString()) / 12;
ObjectId idPipeNew = ObjectId.Null;
AlignmentEntity ent = null;
Structure sPrev = null;
uint pntNum = 0;
ObjectId idCgPntBeg, idCgPntEnd, idCgPntPrev = ObjectId.Null;
TypedValue[] tvs;
for (int i = 0; i < algnData.Count; i++)
{
if (algnData.Count == 1)
{
ent = ents[0];
}
else
{
ent = ents.EntityAtId(algnData[i].ID);
}
ObjectId idStructNew = ObjectId.Null;
Structure s = null;
Pipe p = null;
if (ent.EntityType == AlignmentEntityType.Line)
{
AlignmentLine line = (AlignmentLine)ent;
Point2d pnt2dBeg = line.StartPoint;
Point2d pnt2dEnd = line.EndPoint;
try
{
top = tinSurfDE.FindElevationAtXY(pnt2dBeg.X, pnt2dBeg.Y) + depth;
}
catch (System.Exception)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Pipe endpoint is beyond limit of design surface");
return;
}
Point3d pnt3dBeg = new Point3d(pnt2dBeg.X, pnt2dBeg.Y, top);
try
{
top = tinSurfDE.FindElevationAtXY(pnt2dEnd.X, pnt2dEnd.Y) + depth;
}
catch (System.Exception)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Pipe endpoint is beyond limit of design surface");
return;
}
Point3d pnt3dEnd = new Point3d(pnt2dEnd.X, pnt2dEnd.Y, top);
LineSegment3d seg3d = new LineSegment3d(pnt3dBeg, pnt3dEnd);
net.AddLinePipe(idPipe, idPipeSize, seg3d, ref idPipeNew, true);
p = (Pipe)idPipeNew.getEnt();
p.AddToProfileView(fMNP.idProfileView);
ObjectId idPart = getProfileViewPart();
slope = pnt3dBeg.getSlope(pnt3dEnd);
dZ = diam / (2 * (System.Math.Cos(System.Math.Atan(System.Math.Abs(slope)))));
if (i == 0)
{
pnt3dBeg = new Point3d(pnt3dBeg.X, pnt3dBeg.Y, pnt3dBeg.Z - dZ);
pnt3dEnd = new Point3d(pnt3dEnd.X, pnt3dEnd.Y, pnt3dEnd.Z - dZ);
idCgPntBeg = pnt3dBeg.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntBeg);
idCgPntEnd = pnt3dEnd.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntEnd);
idCgPntPrev = idCgPntEnd;
tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, idCgPntBeg.getHandle().ToString()), 1);
tvs.SetValue(new TypedValue(1005, idCgPntEnd.getHandle().ToString()), 2);
//idPart.setXData(rb, apps.lnkMNP);
idPipeNew.setXData(tvs, apps.lnkMNP);
net.AddStructure(idStruct, idStructSize, pnt3dBeg, 0, ref idStructNew, true);
s = (Structure)idStructNew.getEnt();
s.AddToProfileView(fMNP.idProfileView);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.Start);
net.AddStructure(idStruct, idStructSize, pnt3dEnd, 0, ref idStructNew, true);
s = (Structure)idStructNew.getEnt();
s.AddToProfileView(fMNP.idProfileView);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.End);
sPrev = s;
hPipe.Add(idPipeNew.getHandle().ToString());
}
else
{
pnt3dEnd = new Point3d(pnt3dEnd.X, pnt3dEnd.Y, pnt3dEnd.Z - dZ);
idCgPntEnd = pnt3dEnd.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntEnd);
tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, idCgPntPrev.getHandle().ToString()), 1);
tvs.SetValue(new TypedValue(1005, idCgPntEnd.getHandle().ToString()), 2);
//idPart.setXData(rb, apps.lnkMNP);
idPipeNew.setXData(tvs, apps.lnkMNP);
idCgPntPrev = idCgPntEnd;
net.AddStructure(idStruct, idStructSize, pnt3dEnd, 0, ref idStructNew, true);
s = (Structure)idStructNew.getEnt();
s.AddToProfileView(fMNP.idProfileView);
sPrev.ConnectToPipe(idPipeNew, ConnectorPositionType.Start);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.End);
sPrev = s;
hPipe.Add(idPipeNew.getHandle().ToString());
}
}
else if (ent.EntityType == AlignmentEntityType.Arc)
{
AlignmentArc arc = (AlignmentArc)ent;
double radius = arc.Radius;
Point2d pnt2dBeg = arc.StartPoint;
Point2d pnt2dEnd = arc.EndPoint;
try
{
top = tinSurfDE.FindElevationAtXY(pnt2dBeg.X, pnt2dBeg.Y) + depth;
}
catch (System.Exception)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Pipe endpoint is beyond limit of design surface");
return;
}
Point3d pnt3dBeg = new Point3d(pnt2dBeg.X, pnt2dBeg.Y, top);
try
{
top = tinSurfDE.FindElevationAtXY(pnt2dEnd.X, pnt2dEnd.Y) + depth;
}
catch (System.Exception)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Pipe endpoint is beyond limit of design surface");
return;
}
IntPtr iptr = (IntPtr)0;
Point3d pnt3dEnd = new Point3d(pnt2dEnd.X, pnt2dEnd.Y, top);
Arc a = new Arc();
a.Radius = arc.Radius;
a.StartPoint = new Point3d(pnt2dBeg.X, pnt2dBeg.Y, 0);
a.EndPoint = new Point3d(pnt2dEnd.X, pnt2dEnd.Y, 0);
a.Center = new Point3d(arc.CenterPoint.X, arc.CenterPoint.Y, 0);
Curve3d c = (Curve3d)a.GetGeCurve();
net.AddCurvePipe(idPipe, idPipeSize, c, arc.Clockwise, ref idPipeNew, true);
p = (Pipe)idPipeNew.getEnt();
p.AddToProfileView(fMNP.idProfileView);
ObjectId idPart = getProfileViewPart();
slope = (pnt3dEnd.Z - pnt3dBeg.Z) / arc.Length;
dZ = diam / (2 * (System.Math.Cos(System.Math.Atan(System.Math.Abs(slope)))));
if (i == 0)
{
pnt3dBeg = new Point3d(pnt3dBeg.X, pnt3dBeg.Y, pnt3dBeg.Z - dZ);
pnt3dEnd = new Point3d(pnt3dEnd.X, pnt3dEnd.Y, pnt3dEnd.Z - dZ);
idCgPntBeg = pnt3dBeg.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntBeg);
idCgPntEnd = pnt3dEnd.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntEnd);
tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, idCgPntBeg.getHandle().ToString()), 1);
tvs.SetValue(new TypedValue(1005, idCgPntEnd.getHandle().ToString()), 2);
//idPart.setXData(rb, apps.lnkMNP);
idPipeNew.setXData(tvs, apps.lnkMNP);
net.AddStructure(idStruct, idStructSize, pnt3dBeg, 0, ref idStructNew, true);
s = (Structure)tr.GetObject(idStructNew, OpenMode.ForWrite);
s.AddToProfileView(fMNP.idProfileView);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.Start);
net.AddStructure(idStruct, idStructSize, pnt3dBeg, 0, ref idStructNew, true);
s = (Structure)tr.GetObject(idStructNew, OpenMode.ForWrite);
s.AddToProfileView(fMNP.idProfileView);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.End);
sPrev = s;
hPipe.Add(idPipeNew.getHandle().ToString());
}
else
{
pnt3dEnd = new Point3d(pnt3dEnd.X, pnt3dEnd.Y, pnt3dEnd.Z - dZ);
idCgPntEnd = pnt3dEnd.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntEnd);
tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, idCgPntPrev.getHandle().ToString()), 1);
tvs.SetValue(new TypedValue(1005, idCgPntEnd.getHandle().ToString()), 2);
//idPart.setXData(rb, apps.lnkMNP);
idPipeNew.setXData(tvs, apps.lnkMNP);
idCgPntPrev = idCgPntEnd;
net.AddStructure(idStruct, idStructSize, pnt3dBeg, 0, ref idStructNew, true);
s = (Structure)tr.GetObject(idStructNew, OpenMode.ForWrite);
s.AddToProfileView(fMNP.idProfileView);
sPrev.ConnectToPipe(idPipeNew, ConnectorPositionType.Start);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.End);
sPrev = s;
hPipe.Add(idPipeNew.getHandle().ToString());
}
}
}
tr.Commit();
}
hPipe.Insert(0, "-1");
hPipe.Add("-1");
for (int i = 0; i < idsCgPnt.Count; i++)
{
TypedValue[] tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, hPipe[i]), 1);
tvs.SetValue(new TypedValue(1005, hPipe[i + 1]), 2);
idsCgPnt[i].setXData(tvs, apps.lnkMNP);
}
}