private void button1_Click(object sender, EventArgs e)
{
INFITF.Application catia; //add the reference - catia v5 infiit interface...
try
{
//열려 있는 catia가져오기
catia = (INFITF.Application)Marshal.GetActiveObject("CATIA.Application");
}
catch (Exception)
{
//catia 실행하기
catia = (INFITF.Application)Activator.CreateInstance(Type.GetTypeFromProgID("CATIA.Application"));
catia.Visible = true;
}
MECMOD.PartDocument prtDoc = (MECMOD.PartDocument)catia.Documents.Add("Part");
MECMOD.Part prt = prtDoc.Part;
MECMOD.Bodies bdys = prt.Bodies;
MECMOD.Body bdy = bdys.Add();
MECMOD.Sketches skts = bdy.Sketches;
INFITF.Reference xypln = (INFITF.Reference)prt.OriginElements.PlaneXY;
MECMOD.Sketch skt = skts.Add(xypln);
MECMOD.Factory2D fac2d = skt.OpenEdition();
Point2D p1 = fac2d.CreatePoint(10, 10);
Point2D p2 = fac2d.CreatePoint(10, 40);
Point2D p3 = fac2d.CreatePoint(40, 40);
Point2D p4 = fac2d.CreatePoint(40, 10);
Point2D p5 = fac2d.CreatePoint(30, 20);
Point2D p6 = fac2d.CreatePoint(20, 5);
Line2D linLft = fac2d.CreateLine(10, 10, 10, 40);
Line2D linTop = fac2d.CreateLine(10, 40, 40, 40);
Line2D linRgt = fac2d.CreateLine(40, 40, 40, 10);
object[] parry = { p1, p6, p5, p4 };
Spline2D spl = fac2d.CreateSpline(parry);
linLft.StartPoint = p1;
linLft.EndPoint = p2;
linRgt.StartPoint = p3;
linRgt.EndPoint = p4;
linTop.StartPoint = p2;
linTop.EndPoint = p3;
MECMOD.Constraint cnst = skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeAxisPerpendicularity, (INFITF.Reference)linLft, (INFITF.Reference)linTop);
/*
* INFITF.Reference r1 = prt.CreateReferenceFromGeometry(linLft);
* INFITF.Reference r2 = prt.CreateReferenceFromGeometry(linTop);
* MECMOD.Constraint cnst1 = skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeAxisPerpendicularity, r1, r2);
*/
skt.CloseEdition();
prt.Update();
}
private void button1_Click(object sender, EventArgs e)
{
INFITF.Application Catia;
try
{
Catia = (INFITF.Application)Marshal.GetActiveObject("CATIA.Application");
}
catch
{
Catia = (INFITF.Application)Activator.CreateInstance(Type.GetTypeFromProgID("CATIA.Application"));
Catia.Visible = true;
}
INFITF.Documents Docts = Catia.Documents;
MECMOD.PartDocument PrtDoc = (MECMOD.PartDocument)Docts.Add("Part");
MECMOD.Part Prt = PrtDoc.Part;
MECMOD.Bodies Bodis = Prt.Bodies;
MECMOD.Body PartBody = Bodis.Item(1);
MECMOD.Body Body = Bodis.Add();
MECMOD.Sketches Skts = Body.Sketches;
INFITF.Reference plane = (INFITF.Reference)Prt.OriginElements.PlaneXY;
MECMOD.Sketch Skt = Skts.Add(plane);
MECMOD.Factory2D Fac2D = Skt.OpenEdition();
Point2D Pt1 = Fac2D.CreatePoint(50, 50);
Point2D Pt2 = Fac2D.CreatePoint(50, 100);
Point2D Pt3 = Fac2D.CreatePoint(100, 100);
Point2D Pt4 = Fac2D.CreatePoint(100, 50);
// << Create Line >>
Line2D Lin1 = Fac2D.CreateLine(50, 50, 50, 100);
Line2D Lin2 = Fac2D.CreateLine(50, 100, 100, 100);
Line2D Lin3 = Fac2D.CreateLine(100, 100, 100, 50);
Line2D Lin4 = Fac2D.CreateLine(100, 50, 50, 50);
// Line2D Lin22 = MCreateLine(Fac2d, Pt1, Pt2);
//라인의 시작점부터 마지막점을 결정
Lin1.StartPoint = Pt1;
Lin1.EndPoint = Pt2;
Lin2.StartPoint = Pt2;
Lin2.EndPoint = Pt3;
Lin3.StartPoint = Pt3;
Lin3.EndPoint = Pt4;
Lin4.StartPoint = Pt4;
Lin4.EndPoint = Pt1;
INFITF.Reference rline1 = Prt.CreateReferenceFromGeometry(Lin1);
INFITF.Reference rline2 = Prt.CreateReferenceFromGeometry(Lin2);
INFITF.Reference rline3 = Prt.CreateReferenceFromGeometry(Lin3);
INFITF.Reference rline4 = Prt.CreateReferenceFromGeometry(Lin4);
INFITF.Reference rlineH = Prt.CreateReferenceFromGeometry(Skt.AbsoluteAxis.HorizontalReference);
INFITF.Reference rlineV = Prt.CreateReferenceFromGeometry(Skt.AbsoluteAxis.VerticalReference);
MECMOD.Constraint d1 = Skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rline1, rline3);
MECMOD.Constraint d2 = Skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rline2, rline4);
MECMOD.Constraint d3 = Skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rlineH, rline4);
MECMOD.Constraint d4 = Skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rlineV, rline1);
Skt.CloseEdition();//Skech조건 끝 //
//PAD를 하기 위해서 조건문을 만든다.//
PARTITF.ShapeFactory ShpFac = (PARTITF.ShapeFactory)Prt.ShapeFactory;
//그 shapeFactory를 돌출하기 위해서 AddNewPad를 사용해서 50만큼 돌출한다.//
ShpFac.AddNewPad(Skt, 50);
//새로운 Body2를 만들기 //
MECMOD.Body Body2 = Bodis.Add();
//planed을 기준으로 Skt2를 만든다.//
MECMOD.Sketch Skt2 = (MECMOD.Sketch)Body2.Sketches.Add(plane);
//스켓이 시작 //
Fac2D = Skt2.OpenEdition();
// X=75,Y=75 를 중심으로 D=20의 원을 만들기//
Circle2D Cir2D = Fac2D.CreateClosedCircle(75, 75, 20);
//스켓을 끝내기//
Skt2.CloseEdition();
//PAD 80만큼 //
ShpFac.AddNewPad(Skt2, 80);
//Body3 만들기 //
Body Body3 = Prt.Bodies.Add();
//Skt3를 Body2 안에 plane면을 기준으로 Sketche를 한다.
Sketch Skt3 = Body2.Sketches.Add(plane);
//스킷을 시작//
Fac2D = Skt3.OpenEdition();
// X=75,Y=75 를 중심으로 D=5의 원을 만들기//
Fac2D.CreateClosedCircle(75, 75, 5);
//스켓3을 끝내기//
Skt3.CloseEdition();
//스켓3을 80만큼 PAD를 한다.
ShpFac.AddNewPad(Skt3, 80);
/////////////////
//PartBody에 Prat In Work Object를 사용해서 조건을 만든다.
Prt.InWorkObject = PartBody;
ShpFac.AddNewAdd(Body); //PartBody에 Body를추가
ShpFac.AddNewAdd(Body2); //PartBody에 Body2를추가
ShpFac.AddNewRemove(Body3); //PartBody에 Body3를 제거한다
Prt.Update();
}
private void button1_Click(object sender, EventArgs e)
{
INFITF.Application catia; //add the reference - catia v5 infiit interface...
try
{
//열려 있는 catia가져오기
catia = (INFITF.Application)Marshal.GetActiveObject("CATIA.Application");
}
catch (Exception)
{
//catia 실행하기
catia = (INFITF.Application)Activator.CreateInstance(Type.GetTypeFromProgID("CATIA.Application"));
catia.Visible = true;
}
MECMOD.PartDocument prtDoc = (MECMOD.PartDocument)catia.Documents.Add("Part");
MECMOD.Part prt = prtDoc.Part;
MECMOD.Bodies bdys = prt.Bodies;
MECMOD.Body bdy = bdys.Add();
MECMOD.Sketches skts = bdy.Sketches;
INFITF.Reference xypln = (INFITF.Reference)prt.OriginElements.PlaneXY;
Sketch skt1 = skts.Add(xypln);
Factory2D fac2d = skt1.OpenEdition(); //fac2d안에서 sketch가 이루어진다. fac2d cketch의 기능을 쓸수있다
Point2D p1 = fac2d.CreatePoint(10, 10);
Point2D p2 = fac2d.CreatePoint(10, 30);
Point2D p3 = fac2d.CreatePoint(40, 30);
Point2D p4 = fac2d.CreatePoint(40, 10);
//method를 만들고 line생성
Line2D lin1 = CreateLine(fac2d, p1, p2);
Line2D lin2 = CreateLine(fac2d, p2, p3);
Line2D lin3 = CreateLine(fac2d, p3, p4);
Line2D lin4 = CreateLine(fac2d, p4, p1);
CatConstraintType cnstDis = CatConstraintType.catCstTypeDistance;
MECMOD.Constraint d1 = createCnst(prt, skt1, cnstDis, lin1, lin3);
MECMOD.Constraint d2 = createCnst(prt, skt1, cnstDis, lin2, lin4);
MECMOD.Constraint d3 = createCnst(prt, skt1, cnstDis, skt1.AbsoluteAxis.HorizontalReference, lin4);
MECMOD.Constraint d4 = createCnst(prt, skt1, cnstDis, skt1.AbsoluteAxis.VerticalReference, lin1);
/*
* INFITF.Reference rline1 = prt.CreateReferenceFromGeometry(lin1);
* INFITF.Reference rline2 = prt.CreateReferenceFromGeometry(lin2);
* INFITF.Reference rline3 = prt.CreateReferenceFromGeometry(lin3);
* INFITF.Reference rline4 = prt.CreateReferenceFromGeometry(lin4);
* INFITF.Reference rlineH = prt.CreateReferenceFromGeometry(skt1.AbsoluteAxis.HorizontalReference);
* INFITF.Reference rlineV = prt.CreateReferenceFromGeometry(skt1.AbsoluteAxis.VerticalReference);
*
* MECMOD.Constraint d1 = skt1.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rline1, rline3);
* MECMOD.Constraint d2 = skt1.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rline2, rline4);
* MECMOD.Constraint d3 = skt1.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rlineH, rline4);
* MECMOD.Constraint d4 = skt1.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rlineV, rline1);
*/
skt1.CloseEdition();
//create a circlr
Sketch skt2 = skts.Add(xypln);
Factory2D fac2d1 = skt2.OpenEdition();
//fac2d = skt2.OpenEdition(); //이렇게 함녀 된다.
INFITF.Reference H = prt.CreateReferenceFromGeometry(skt2.AbsoluteAxis.HorizontalReference);
INFITF.Reference V = prt.CreateReferenceFromGeometry(skt2.AbsoluteAxis.VerticalReference);
Circle2D c = fac2d1.CreateClosedCircle(40, 30, 10);
c.CenterPoint = p3;
// MECMOD.Constraint orPtH = skt2.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance,H,(INFITF.Reference)c);
//MECMOD.Constraint orPtV = skt2.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, V, (INFITF.Reference)c);
MECMOD.Constraint r = skt2.Constraints.AddMonoEltCst(CatConstraintType.catCstTypeRadius, (INFITF.Reference)c);
skt2.CloseEdition();
ShapeFactory ShpFac = (ShapeFactory)prt.ShapeFactory;
//pad
Pad pad = ShpFac.AddNewPad(skt1, 20);
//poket
Pocket pock = ShpFac.AddNewPocket(skt2, 20);
pock.DirectionOrientation = CatPrismOrientation.catRegularOrientation;
prt.Update();
}
static void Main(string[] args)
{
INFITF.Application catia; //add the reference - catia v5 infiit interface...
try
{
//열려 있는 catia가져오기
catia = (INFITF.Application)Marshal.GetActiveObject("CATIA.Application");
}
catch (Exception)
{
//catia 실행하기
catia = (INFITF.Application)Activator.CreateInstance(Type.GetTypeFromProgID("CATIA.Application"));
catia.Visible = true;
}
MECMOD.PartDocument prtDoc = (MECMOD.PartDocument)catia.Documents.Add("Part");
MECMOD.Part prt = prtDoc.Part;
MECMOD.Bodies bdys = prt.Bodies;
MECMOD.Body bdy = bdys.Add();
MECMOD.Sketches skts = bdy.Sketches;
INFITF.Reference xypln = (INFITF.Reference)prt.OriginElements.PlaneXY;
MECMOD.Sketch skt = skts.Add(xypln);
MECMOD.Factory2D fac2d = skt.OpenEdition();
Point2D p1 = fac2d.CreatePoint(50, 50);
Point2D p2 = fac2d.CreatePoint(50, 100);
Point2D p3 = fac2d.CreatePoint(100, 100);
Point2D p4 = fac2d.CreatePoint(100, 50);
//method를 만들고 line생성
Line2D lin1 = CreateLine(fac2d, p1, p2);
Line2D lin2 = CreateLine(fac2d, p2, p3);
Line2D lin3 = CreateLine(fac2d, p3, p4);
Line2D lin4 = CreateLine(fac2d, p4, p1);
/*
* Line2D lin1 = fac2d.CreateLine(50,50,50,100);
* Line2D lin2 = fac2d.CreateLine(50, 100, 100, 100);
* Line2D lin3 = fac2d.CreateLine(100, 100, 100, 50);
* Line2D lin4 = fac2d.CreateLine(100, 50, 50, 50);
*
* lin1.StartPoint = p1;
* lin1.EndPoint = p2;
*
* lin2.StartPoint = p2;
* lin2.EndPoint = p3;
*
* lin3.StartPoint = p3;
* lin3.EndPoint = p4;
*
* lin4.StartPoint = p4;
* lin4.EndPoint = p1;
*/
INFITF.Reference rline1 = prt.CreateReferenceFromGeometry(lin1);
INFITF.Reference rline2 = prt.CreateReferenceFromGeometry(lin2);
INFITF.Reference rline3 = prt.CreateReferenceFromGeometry(lin3);
INFITF.Reference rline4 = prt.CreateReferenceFromGeometry(lin4);
INFITF.Reference rlineH = prt.CreateReferenceFromGeometry(skt.AbsoluteAxis.HorizontalReference);
INFITF.Reference rlineV = prt.CreateReferenceFromGeometry(skt.AbsoluteAxis.VerticalReference);
Constraint d1 = skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rline1, rline3);
Constraint d2 = skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rline2, rline4);
Constraint d3 = skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rlineH, rline4);
Constraint d4 = skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeDistance, rlineV, rline1);
skt.CloseEdition();
}
private void button1_Click(object sender, EventArgs e)
{
INFITF.Application catia; //INFITF.Application; returntype, catia; 변수명
try
{
catia = (INFITF.Application)Marshal.GetActiveObject("CATIA.Application"); //실행되 있는 카티아 가져오기
}
catch (Exception ex)
{
//MessageBox.Show("카티아가 실행돼 있지 않습니다.");
//MessageBox.Show("카티아 가져오기 오류: "+ex.Message);
//catia 열기
catia = (INFITF.Application)Activator.CreateInstance(Type.GetTypeFromProgID("CATIA.Application"));
catia.Visible = true;
}
//creat a part
/*
* catia.Documents.Add("Part1");
* //catia.Documents.Open();
* MECMOD.PartDocument part1;
*/
MECMOD.PartDocument partDoc;
partDoc = (MECMOD.PartDocument)catia.Documents.Add("Part");
MECMOD.Part prt = partDoc.Part; //partDoc에 part를 담은 것
MECMOD.Bodies bodies = prt.Bodies;
MECMOD.Body body = bodies.Add(); //다름 body만들기
//MECMOD.Body body0 = bodies.Item(1); //생성되 있는 partbody가져오기
//MECMOD.Body body2 = bodies.Item("PartBody"); //해당되는 것에 이름
//MECMOD.Body body1 = prt.MainBody; //partbody가져오기
MECMOD.Sketches skts = body.Sketches;
INFITF.Reference xyPln = (INFITF.Reference)prt.OriginElements.PlaneXY; //creat a plan
MECMOD.Sketch skt = skts.Add(xyPln); //plane에 skt를 작성한다.
//open the skt
MECMOD.Factory2D fac2d = skt.OpenEdition();
//6.create the points
MECMOD.GeometricElements gme = prt.GeometricElements;
MECMOD.Point2D p1 = fac2d.CreatePoint(10, 10);
MECMOD.Point2D p2 = fac2d.CreatePoint(10, 40);
MECMOD.Point2D p3 = fac2d.CreatePoint(40, 40);
MECMOD.Point2D p4 = fac2d.CreatePoint(40, 10);
MECMOD.Point2D p5 = fac2d.CreatePoint(30, 20);
MECMOD.Point2D p6 = fac2d.CreatePoint(20, 5);
//7.create the lines
MECMOD.Line2D line1 = fac2d.CreateLine(10, 10, 10, 40);
MECMOD.Line2D line2 = fac2d.CreateLine(10, 40, 40, 40);
MECMOD.Line2D line3 = fac2d.CreateLine(40, 40, 40, 10);
//8.9 create the spline
Object[] pa = { p1, p6, p5, p4 };
MECMOD.Spline2D spline = fac2d.CreateSpline(pa);
//구속조건 추가
//10
line1.StartPoint = p1;
line1.EndPoint = p2;
line2.StartPoint = p2;
line2.EndPoint = p3;
line3.StartPoint = p3;
line3.EndPoint = p4;
//11.create references
INFITF.Reference rline1 = prt.CreateReferenceFromGeometry(line1);
INFITF.Reference rline2 = prt.CreateReferenceFromGeometry(line2);
INFITF.Reference rline3 = prt.CreateReferenceFromGeometry(line3);
//12.
MECMOD.Constraint cns = skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeAxisPerpendicularity, rline1, rline2);
MECMOD.Constraint cns1 = skt.Constraints.AddBiEltCst(CatConstraintType.catCstTypeAxisPerpendicularity, rline3, rline2);
//13.
skt.CloseEdition();
//catia.Visible = true;
}