// ////////////////////////////////////////////////////////////////////////
// PUBLIC METHODS
//
/// <summary>
/// UpdateSection
/// <param name="companyId">companyId</param>
public void UpdateSection(int companyId)
{
foreach (Fix1WorkJuntionLiningSectionTDS.LFS_WORK_JUNCTIONLINING_SECTIONRow row in (Fix1WorkJuntionLiningSectionTDS.LFS_WORK_JUNCTIONLINING_SECTIONDataTable)Table)
{
WorkJunctionLiningSectionGateway workJunctionLiningSectionGateway = new WorkJunctionLiningSectionGateway();
workJunctionLiningSectionGateway.LoadByWorkId(row.WorkID, companyId);
// get old values of section
int numLats = workJunctionLiningSectionGateway.GetNumLats(row.WorkID);
int notLinedYet = workJunctionLiningSectionGateway.GetNotLinedYet(row.WorkID);
bool allMeasured = workJunctionLiningSectionGateway.GetAllMeasured(row.WorkID);
bool deleted = workJunctionLiningSectionGateway.GetDeleted(row.WorkID);
string issueWithLaterals = workJunctionLiningSectionGateway.GetIssueWithLaterals(row.WorkID);
int notMeasuredYet = workJunctionLiningSectionGateway.GetNotMeasuredYet(row.WorkID);
int notDeliveredYet = workJunctionLiningSectionGateway.GetNotDeliveredYet(row.WorkID);
string trafficControl = workJunctionLiningSectionGateway.GetTrafficControl(row.WorkID);
string trafficControlDetails = workJunctionLiningSectionGateway.GetTrafficControlDetails(row.WorkID);
bool standardBypass = workJunctionLiningSectionGateway.GetStandardBypass(row.WorkID);
string standardBypassComments = workJunctionLiningSectionGateway.GetStandardBypassComments(row.WorkID);
int availableToLine = workJunctionLiningSectionGateway.GetAvailableToLine(row.WorkID);
// get new values of section
int newAvailableToLine = 0;
// load laterals
WorkJunctionLiningLateralGateway workJunctionLiningLateralGateway = new WorkJunctionLiningLateralGateway();
workJunctionLiningLateralGateway.LoadBySectionWorkId(row.WorkID, companyId);
int delivered = 0;
int installed = 0;
foreach (WorkTDS.LFS_WORK_JUNCTIONLINING_LATERALRow row1 in (WorkTDS.LFS_WORK_JUNCTIONLINING_LATERALDataTable)workJunctionLiningLateralGateway.Table)
{
if ((!row1.Deleted) && (!row1.OutOfScope))
{
if (!row1.IsDeliveredNull()) delivered++;
if (!row1.IsLinerInstalledNull()) installed++;
}
}
if (numLats > 0)
{
newAvailableToLine = delivered - installed;
}
// Update Work Juntion Lining Section
WorkJunctionLiningSection workJunctionLiningSection = new WorkJunctionLiningSection(null);
workJunctionLiningSection.UpdateDirect(row.WorkID, numLats, notLinedYet, allMeasured, deleted, issueWithLaterals, notMeasuredYet, notDeliveredYet, companyId, trafficControl, trafficControlDetails, standardBypass, standardBypassComments, availableToLine, numLats, notLinedYet, allMeasured, issueWithLaterals, notMeasuredYet, notDeliveredYet, trafficControl, trafficControlDetails, standardBypass, standardBypassComments, newAvailableToLine);
}
}
/// <summary>
/// UpdateSection
/// <param name="sectionWorkId">sectionWorkId</param>
/// <param name="lateralWorkId">lateralWorkId</param>
/// <param name="companyId">companyId</param>
public void UpdateSection(int sectionWorkId, int lateralWorkId, int companyId)
{
// load section
WorkJunctionLiningSectionGateway workJunctionLiningSectionGateway = new WorkJunctionLiningSectionGateway();
workJunctionLiningSectionGateway.LoadByWorkId(sectionWorkId, companyId);
// get old values of section
int numLats = workJunctionLiningSectionGateway.GetNumLats(sectionWorkId);
int notLinedYet = workJunctionLiningSectionGateway.GetNotLinedYet(sectionWorkId);
bool allMeasured = workJunctionLiningSectionGateway.GetAllMeasured(sectionWorkId);
bool deleted = workJunctionLiningSectionGateway.GetDeleted(sectionWorkId);
string issueWithLaterals = workJunctionLiningSectionGateway.GetIssueWithLaterals(sectionWorkId);
int notMeasuredYet = workJunctionLiningSectionGateway.GetNotMeasuredYet(sectionWorkId);
int notDeliveredYet = workJunctionLiningSectionGateway.GetNotDeliveredYet(sectionWorkId);
string trafficControl = workJunctionLiningSectionGateway.GetTrafficControl(sectionWorkId);
string trafficControlDetails = workJunctionLiningSectionGateway.GetTrafficControlDetails(sectionWorkId);
bool standardBypass = workJunctionLiningSectionGateway.GetStandardBypass(sectionWorkId);
string standardBypassComments = workJunctionLiningSectionGateway.GetStandardBypassComments(sectionWorkId);
int availableToLine = workJunctionLiningSectionGateway.GetAvailableToLine(sectionWorkId);
// get new values of section
int newNumLats = 0;
int newNotLinedYet = 0;
bool newAllMeasured = true;
int newNotMeasuredYet = 0;
int newNotDeliveredYet = 0;
string newIssueWithLaterals = "No";
int newAvailableToLine = 0;
int totDelivered = 0;
int totInstalled = 0;
// load laterals
WorkJunctionLiningLateralGateway workJunctionLiningLateralGateway = new WorkJunctionLiningLateralGateway();
workJunctionLiningLateralGateway.LoadBySectionWorkId(sectionWorkId, companyId);
foreach (WorkTDS.LFS_WORK_JUNCTIONLINING_LATERALRow row in (WorkTDS.LFS_WORK_JUNCTIONLINING_LATERALDataTable)workJunctionLiningLateralGateway.Table)
{
if (!row.Deleted)
{
// ... With no outofscope issue
if (!row.OutOfScope)
{
newNumLats++;
if (row.IsLinerInstalledNull()) newNotLinedYet++;
if (row.IsMeasuredNull()) newAllMeasured = false;
if (row.IsMeasuredNull()) newNotMeasuredYet++;
if (row.IsDeliveredNull()) newNotDeliveredYet++;
if (!row.IsDeliveredNull()) totDelivered++;
if (!row.IsLinerInstalledNull()) totInstalled++;
}
}
}
if (newNumLats == 0) newAllMeasured = false;
if (newNumLats > 0)
{
newAvailableToLine = totDelivered - totInstalled;
// lining plan
JlLiningPlanGateway jlLiningPlanGateway = new JlLiningPlanGateway();
if (jlLiningPlanGateway.IsLateralsIssueNo(sectionWorkId))
{
newIssueWithLaterals = "No";
}
else
{
if (jlLiningPlanGateway.IsLateralsIssueOutOfScope(sectionWorkId))
{
newIssueWithLaterals = "Out Of Scope";
}
else
{
if (jlLiningPlanGateway.IsLateralsIssueYesOutOfScope(sectionWorkId))
{
newIssueWithLaterals = "Yes, Out Of Scope";
}
else
{
if (jlLiningPlanGateway.IsLateralsIssueYes(sectionWorkId))
{
newIssueWithLaterals = "Yes";
}
}
}
}
}
// Update Work Juntion Lining Section
WorkJunctionLiningSection workJunctionLiningSection = new WorkJunctionLiningSection(null);
workJunctionLiningSection.UpdateDirect(sectionWorkId, numLats, notLinedYet, allMeasured, deleted, issueWithLaterals, notMeasuredYet, notDeliveredYet, companyId, trafficControl, trafficControlDetails, standardBypass, standardBypassComments, availableToLine, newNumLats, newNotLinedYet, newAllMeasured, newIssueWithLaterals, newNotMeasuredYet, newNotDeliveredYet, trafficControl, trafficControlDetails, standardBypass, standardBypassComments, newAvailableToLine);
}
/// <summary>
/// Save
/// </summary>
/// <param name="countryId">countryId</param>
/// <param name="provinceId">provinceId</param>
/// <param name="countyId">countyId</param>
/// <param name="cityId">cityId</param>
/// <param name="projectId">projectId</param>
/// <param name="sectionAssetId">sectionAssetId</param>
/// <param name="companyId">companyId</param>
/// <param name="includeWetOutInformation">includeWetOutInformation</param>
/// <param name="includeInversionInformation">includeInversionInformation</param>
public void Save(Int64? countryId, Int64? provinceId, Int64? countyId, Int64? cityId, int projectId, int sectionAssetId, int companyId, bool includeWetOutInformation, bool includeInversionInformation)
{
FullLengthLiningTDS fullLengthLiningChanges = (FullLengthLiningTDS)Data.GetChanges();
if (fullLengthLiningChanges.WorkDetails.Rows.Count > 0)
{
FullLengthLiningWorkDetailsGateway fullLengthLiningWorkDetailsGateway = new FullLengthLiningWorkDetailsGateway(fullLengthLiningChanges);
// Update sections
foreach (FullLengthLiningTDS.WorkDetailsRow row in (FullLengthLiningTDS.WorkDetailsDataTable)fullLengthLiningChanges.WorkDetails)
{
// Unchanged values
int workId = row.WorkID;
// Original values
string originalClientId = fullLengthLiningWorkDetailsGateway.GetClientIdOriginal(workId);
DateTime? originalProposedLiningDate = fullLengthLiningWorkDetailsGateway.GetProposedLiningDateOriginal(workId);
DateTime? originalDeadlineLiningDate = fullLengthLiningWorkDetailsGateway.GetDeadlineLiningDateOriginal(workId);
DateTime? originalP1Date = fullLengthLiningWorkDetailsGateway.GetP1DateOriginal(workId);
DateTime? originalM1Date = fullLengthLiningWorkDetailsGateway.GetM1DateOriginal(workId);
DateTime? originalM2Date = fullLengthLiningWorkDetailsGateway.GetM2DateOriginal(workId);
DateTime? originalInstallDate = fullLengthLiningWorkDetailsGateway.GetInstallDateOriginal(workId);
DateTime? originalFinalVideoDate = fullLengthLiningWorkDetailsGateway.GetFinalVideoDateOriginal(workId);
bool originalIssueIdentified = fullLengthLiningWorkDetailsGateway.GetIssueIdentifiedOriginal(workId);
bool originalIssueLFS = fullLengthLiningWorkDetailsGateway.GetIssueLFSOriginal(workId);
bool originalIssueClient = fullLengthLiningWorkDetailsGateway.GetIssueClientOriginal(workId);
bool originalIssueSales = fullLengthLiningWorkDetailsGateway.GetIssueSalesOriginal(workId);
bool originalIssueGivenToClient = fullLengthLiningWorkDetailsGateway.GetIssueGivenToClientOriginal(workId);
bool originalIssueResolved = fullLengthLiningWorkDetailsGateway.GetIssueResolvedOriginal(workId);
bool originalIssueInvestigation = fullLengthLiningWorkDetailsGateway.GetIssueInvestigationOriginal(workId);
int? originalCxisRemoved = fullLengthLiningWorkDetailsGateway.GetCxisRemovedOriginal(workId);
bool originalRoboticPrepCompleted = fullLengthLiningWorkDetailsGateway.GetRoboticPrepCompletedOriginal(workId);
DateTime? originalRoboticPrepCompletedDate = fullLengthLiningWorkDetailsGateway.GetRoboticPrepCompletedDateOriginal(workId);
DateTime? originalPreFlushDate = fullLengthLiningWorkDetailsGateway.GetPreFlushDateOriginal(workId);
DateTime? originalPreVideoDate = fullLengthLiningWorkDetailsGateway.GetPreVideoDateOriginal(workId);
int originalRaWorkId = fullLengthLiningWorkDetailsGateway.GetRaWorkIdOriginal(workId);
bool originalP1Completed = fullLengthLiningWorkDetailsGateway.GetP1CompletedOriginal(workId);
// M1 data
string originalMeasurementTakenBy = fullLengthLiningWorkDetailsGateway.GetMeasurementTakenByOriginal(workId);
string originalMaterial = fullLengthLiningWorkDetailsGateway.GetMaterialOriginal(workId);
string originalTrafficControl = fullLengthLiningWorkDetailsGateway.GetTrafficControlOriginal(workId);
string originalSiteDetails = fullLengthLiningWorkDetailsGateway.GetSiteDetailsOriginal(workId);
bool originalPipeSizeChange = fullLengthLiningWorkDetailsGateway.GetPipeSizeChangeOriginal(workId);
bool originalStandardBypass = fullLengthLiningWorkDetailsGateway.GetStandardBypassOriginal(workId);
string originalStandardBypassComments = fullLengthLiningWorkDetailsGateway.GetStandardBypassCommentsOriginal(workId);
string originalTrafficControlDetails = fullLengthLiningWorkDetailsGateway.GetTrafficControlDetailsOriginal(workId);
string originalMeasurementType = fullLengthLiningWorkDetailsGateway.GetMeasurementTypeOriginal(workId);
string originalMeasurementFromMh = fullLengthLiningWorkDetailsGateway.GetMeasurementFromMhOriginal(workId);
string originalVideoDoneFromMh = fullLengthLiningWorkDetailsGateway.GetVideoDoneFromMhOriginal(workId);
string originalVideoDoneToMh = fullLengthLiningWorkDetailsGateway.GetVideoDoneToMhOriginal(workId);
string originalAccessType = fullLengthLiningWorkDetailsGateway.GetAccessTypeOriginal(workId);
// M2 data
string originalMeasurementTakenByM2 = fullLengthLiningWorkDetailsGateway.GetMeasurementTakenByM2Original(workId);
bool originalDropPipe = fullLengthLiningWorkDetailsGateway.GetDropPipeOriginal(workId);
string originalDropPipeInvertDepth = fullLengthLiningWorkDetailsGateway.GetDropPipeInvertDepthOriginal(workId);
int? originalCappedLaterals = fullLengthLiningWorkDetailsGateway.GetCappedLateralsOriginal(workId);
string originalLineWithId = fullLengthLiningWorkDetailsGateway.GetLineWithIdOriginal(workId);
string originalHydrantAddress = fullLengthLiningWorkDetailsGateway.GetHydrantAddressOriginal(workId);
string originalHydroWireWithin10FtOfInversionMH = fullLengthLiningWorkDetailsGateway.GetHydroWiredWithin10FtOfInversionMHOriginal(workId);
string originalDistanceToInversionMh = fullLengthLiningWorkDetailsGateway.GetDistanceToInversionMhOriginal(workId);
string originalSurfaceGrade = fullLengthLiningWorkDetailsGateway.GetSurfaceGradeOriginal(workId);
bool originalHydroPulley = fullLengthLiningWorkDetailsGateway.GetHydroPulleyOriginal(workId);
bool originalFridgeCart = fullLengthLiningWorkDetailsGateway.GetFridgeCartOriginal(workId);
bool originalTwoPump = fullLengthLiningWorkDetailsGateway.GetTwoPumpOriginal(workId);
bool originalSixBypass = fullLengthLiningWorkDetailsGateway.GetSixBypassOriginal(workId);
bool originalScaffolding = fullLengthLiningWorkDetailsGateway.GetScaffoldingOriginal(workId);
bool originalWinchExtension = fullLengthLiningWorkDetailsGateway.GetWinchExtensionOriginal(workId);
bool originalExtraGenerator = fullLengthLiningWorkDetailsGateway.GetExtraGeneratorOriginal(workId);
bool originalGreyCableExtension = fullLengthLiningWorkDetailsGateway.GetGreyCableExtensionOriginal(workId);
bool originalEasementMats = fullLengthLiningWorkDetailsGateway.GetEasementMatsOriginal(workId);
bool originalRampRequired = fullLengthLiningWorkDetailsGateway.GetRampRequiredOriginal(workId);
string originalVideoLength = fullLengthLiningWorkDetailsGateway.GetVideoLengthOriginal(workId);
bool originalCameraSkid = fullLengthLiningWorkDetailsGateway.GetCameraSkidOriginal(workId);
// Comments
string originalComments = fullLengthLiningWorkDetailsGateway.GetCommentsOriginal(workId);
// New variables
string newClientId = fullLengthLiningWorkDetailsGateway.GetClientId(workId);
DateTime? newProposedLiningDate = fullLengthLiningWorkDetailsGateway.GetProposedLiningDate(workId);
DateTime? newDeadlineLiningDate = fullLengthLiningWorkDetailsGateway.GetDeadlineLiningDate(workId);
DateTime? newP1Date = fullLengthLiningWorkDetailsGateway.GetP1Date(workId);
DateTime? newM1Date = fullLengthLiningWorkDetailsGateway.GetM1Date(workId);
DateTime? newM2Date = fullLengthLiningWorkDetailsGateway.GetM2Date(workId);
DateTime? newInstallDate = fullLengthLiningWorkDetailsGateway.GetInstallDate(workId);
DateTime? newFinalVideoDate = fullLengthLiningWorkDetailsGateway.GetFinalVideoDate(workId);
bool newIssueIdentified = fullLengthLiningWorkDetailsGateway.GetIssueIdentified(workId);
bool newIssueLFS = fullLengthLiningWorkDetailsGateway.GetIssueLFS(workId);
bool newIssueClient = fullLengthLiningWorkDetailsGateway.GetIssueClient(workId);
bool newIssueSales = fullLengthLiningWorkDetailsGateway.GetIssueSales(workId);
bool newIssueGivenToClient = fullLengthLiningWorkDetailsGateway.GetIssueGivenToClient(workId);
bool newIssueResolved = fullLengthLiningWorkDetailsGateway.GetIssueResolved(workId);
bool newIssueInvestigation = fullLengthLiningWorkDetailsGateway.GetIssueInvestigation(workId);
int? newCxisRemoved = fullLengthLiningWorkDetailsGateway.GetCxisRemoved(workId);
bool newRoboticPrepCompleted = fullLengthLiningWorkDetailsGateway.GetRoboticPrepCompleted(workId);
DateTime? newRoboticPrepCompletedDate = fullLengthLiningWorkDetailsGateway.GetRoboticPrepCompletedDate(workId);
DateTime? newPreFlushDate = fullLengthLiningWorkDetailsGateway.GetPreFlushDate(workId);
DateTime? newPreVideoDate = fullLengthLiningWorkDetailsGateway.GetPreVideoDate(workId);
int newRaWorkId = fullLengthLiningWorkDetailsGateway.GetRaWorkId(workId);
bool newP1Completed = fullLengthLiningWorkDetailsGateway.GetP1Completed(workId);
// M1
string newMeasurementTakenBy = fullLengthLiningWorkDetailsGateway.GetMeasurementTakenBy(workId);
string newMaterial = fullLengthLiningWorkDetailsGateway.GetMaterial(workId);
string newTrafficControl = fullLengthLiningWorkDetailsGateway.GetTrafficControl(workId);
string newSiteDetails = fullLengthLiningWorkDetailsGateway.GetSiteDetails(workId);
bool newPipeSizeChange = fullLengthLiningWorkDetailsGateway.GetPipeSizeChange(workId);
bool newStandardBypass = fullLengthLiningWorkDetailsGateway.GetStandardBypass(workId);
string newStandardBypassComments = fullLengthLiningWorkDetailsGateway.GetStandardBypassComments(workId);
string newTrafficControlDetails = fullLengthLiningWorkDetailsGateway.GetTrafficControlDetails(workId);
string newMeasurementType = fullLengthLiningWorkDetailsGateway.GetMeasurementType(workId);
string newMeasurementFromMh = fullLengthLiningWorkDetailsGateway.GetMeasurementFromMh(workId);
string newVideoDoneFromMh = fullLengthLiningWorkDetailsGateway.GetVideoDoneFromMh(workId);
string newVideoDoneToMh = fullLengthLiningWorkDetailsGateway.GetVideoDoneToMh(workId);
string newAccessType = fullLengthLiningWorkDetailsGateway.GetAccessType(workId);
// M2
string newMeasurementTakenByM2 = fullLengthLiningWorkDetailsGateway.GetMeasurementTakenByM2(workId);
bool newDropPipe = fullLengthLiningWorkDetailsGateway.GetDropPipe(workId);
string newDropPipeInvertDepth = fullLengthLiningWorkDetailsGateway.GetDropPipeInvertDepth(workId);
int? newCappedLaterals = fullLengthLiningWorkDetailsGateway.GetCappedLaterals(workId);
string newLineWithId = fullLengthLiningWorkDetailsGateway.GetLineWithId(workId);
string newHydrantAddress = fullLengthLiningWorkDetailsGateway.GetHydrantAddress(workId);
string newHydroWireWithin10FtOfInversionMH = fullLengthLiningWorkDetailsGateway.GetHydroWiredWithin10FtOfInversionMH(workId);
string newDistanceToInversionMh = fullLengthLiningWorkDetailsGateway.GetDistanceToInversionMh(workId);
string newSurfaceGrade = fullLengthLiningWorkDetailsGateway.GetSurfaceGrade(workId);
bool newHydroPulley = fullLengthLiningWorkDetailsGateway.GetHydroPulley(workId);
bool newFridgeCart = fullLengthLiningWorkDetailsGateway.GetFridgeCart(workId);
bool newTwoPump = fullLengthLiningWorkDetailsGateway.GetTwoPump(workId);
bool newSixBypass = fullLengthLiningWorkDetailsGateway.GetSixBypass(workId);
bool newScaffolding = fullLengthLiningWorkDetailsGateway.GetScaffolding(workId);
bool newWinchExtension = fullLengthLiningWorkDetailsGateway.GetWinchExtension(workId);
bool newExtraGenerator = fullLengthLiningWorkDetailsGateway.GetExtraGenerator(workId);
bool newGreyCableExtension = fullLengthLiningWorkDetailsGateway.GetGreyCableExtension(workId);
bool newEasementMats = fullLengthLiningWorkDetailsGateway.GetEasementMats(workId);
bool newRampRequired = fullLengthLiningWorkDetailsGateway.GetRampRequired(workId);
string newVideoLength = fullLengthLiningWorkDetailsGateway.GetVideoLength(workId);
bool newCameraSkid = fullLengthLiningWorkDetailsGateway.GetCameraSkid(workId);
// comments
string newComments = fullLengthLiningWorkDetailsGateway.GetComments(workId);
// Update work
UpdateWork(countryId, provinceId, countyId, cityId, workId, originalClientId, originalProposedLiningDate, originalDeadlineLiningDate, originalP1Date, originalM1Date, originalM2Date, originalInstallDate, originalFinalVideoDate, originalIssueIdentified, originalIssueLFS, originalIssueClient, originalIssueSales, originalIssueGivenToClient, originalIssueResolved, originalIssueInvestigation, originalCxisRemoved, originalRoboticPrepCompleted, originalRoboticPrepCompletedDate, originalMeasurementTakenBy, originalTrafficControl, originalSiteDetails, originalPipeSizeChange, originalStandardBypass, originalStandardBypassComments, originalTrafficControlDetails, originalMeasurementType, originalMeasurementFromMh, originalVideoDoneFromMh, originalVideoDoneToMh, originalMeasurementTakenByM2, originalDropPipe, originalDropPipeInvertDepth, originalCappedLaterals, originalLineWithId, originalHydrantAddress, originalHydroWireWithin10FtOfInversionMH, originalDistanceToInversionMh, originalSurfaceGrade, originalHydroPulley, originalFridgeCart, originalTwoPump, originalSixBypass, originalScaffolding, originalWinchExtension, originalExtraGenerator, originalGreyCableExtension, originalEasementMats, originalRampRequired, originalVideoLength, originalComments, originalPreFlushDate, originalPreVideoDate, originalRaWorkId, false, companyId, originalMaterial, originalCameraSkid, originalAccessType, originalP1Completed, newClientId, newProposedLiningDate, newDeadlineLiningDate, newP1Date, newM1Date, newM2Date, newInstallDate, newFinalVideoDate, newIssueIdentified, newIssueLFS, newIssueClient, newIssueSales, newIssueGivenToClient, newIssueResolved, newIssueInvestigation, newCxisRemoved, newRoboticPrepCompleted, newRoboticPrepCompletedDate, newMeasurementTakenBy, newMaterial, newTrafficControl, newSiteDetails, newPipeSizeChange, newStandardBypass, newStandardBypassComments, newTrafficControlDetails, newMeasurementType, newMeasurementFromMh, newVideoDoneFromMh, newVideoDoneToMh, newMeasurementTakenByM2, newDropPipe, newDropPipeInvertDepth, newCappedLaterals, newLineWithId, newHydrantAddress, newHydroWireWithin10FtOfInversionMH, newDistanceToInversionMh, newSurfaceGrade, newHydroPulley, newFridgeCart, newTwoPump, newSixBypass, newScaffolding, newWinchExtension, newExtraGenerator, newGreyCableExtension, newEasementMats, newRampRequired, newVideoLength, newComments, newPreFlushDate, newPreVideoDate, newRaWorkId, sectionAssetId, false, companyId, newCameraSkid, newAccessType, newP1Completed);
// For wet out information
if (includeWetOutInformation)
{
// Update data
WorkFullLengthLiningWetOutGateway workFullLengthLiningWetOutGateway = new WorkFullLengthLiningWetOutGateway();
workFullLengthLiningWetOutGateway.LoadByWorkId(workId, companyId);
// ... Verify if work has wet out data information
if (workFullLengthLiningWetOutGateway.Table.Rows.Count > 0)
{
// Wet Out data original values
string originalLinerTube = fullLengthLiningWorkDetailsGateway.GetLinerTubeOriginal(workId);
int originalResinID = fullLengthLiningWorkDetailsGateway.GetResinIdOriginal(workId);
decimal originalExcessResin = fullLengthLiningWorkDetailsGateway.GetExcessResinOriginal(workId);
string originalPoundsDrums = fullLengthLiningWorkDetailsGateway.GetPoundsDrumsOriginal(workId);
decimal originalDrumDiameter = fullLengthLiningWorkDetailsGateway.GetDrumDiameterOriginal(workId);
decimal originalHoistMaximumHeight = fullLengthLiningWorkDetailsGateway.GetHoistMaximumHeightOriginal(workId);
decimal originalHoistMinimumHeight = fullLengthLiningWorkDetailsGateway.GetHoistMinimumHeightOriginal(workId);
decimal originalDownDropTubeLenght = fullLengthLiningWorkDetailsGateway.GetDownDropTubeLenghtOriginal(workId);
decimal originalPumpHeightAboveGround = fullLengthLiningWorkDetailsGateway.GetPumpHeightAboveGroundOriginal(workId);
int originalTubeResinToFeltFactor = fullLengthLiningWorkDetailsGateway.GetTubeResinToFeltFactorOriginal(workId);
DateTime originalDateOfSheet = fullLengthLiningWorkDetailsGateway.GetDateOfSheetOriginal(workId);
int originalEmployeeID = fullLengthLiningWorkDetailsGateway.GetEmployeeIdOriginal(workId);
string originalRunDetails = fullLengthLiningWorkDetailsGateway.GetRunDetailsOriginal(workId);
string originalRunDetails2 = fullLengthLiningWorkDetailsGateway.GetRunDetails2Original(workId);
DateTime originalWetOutDate = fullLengthLiningWorkDetailsGateway.GetWetOutDateOriginal(workId);
DateTime? originalWetOutInstallDate = fullLengthLiningWorkDetailsGateway.GetWetOutInstallDateOriginal(workId);
string originalThickness = fullLengthLiningWorkDetailsGateway.GetInversionThicknessOriginal(workId);
decimal originalLengthToLine = fullLengthLiningWorkDetailsGateway.GetLengthToLineOriginal(workId);
decimal originalPlusExtra = fullLengthLiningWorkDetailsGateway.GetPlusExtraOriginal(workId);
decimal originalForTurnOffset = fullLengthLiningWorkDetailsGateway.GetForTurnOffsetOriginal(workId);
decimal originalLengthToWetOut = fullLengthLiningWorkDetailsGateway.GetLengthToWetOutOriginal(workId);
decimal originalTubeMaxColdHead = fullLengthLiningWorkDetailsGateway.GetTubeMaxColdHeadOriginal(workId);
decimal originalTubeMaxColdHeadPsi = fullLengthLiningWorkDetailsGateway.GetTubeMaxColdHeadPsiOriginal(workId);
decimal originalTubeMaxHotHead = fullLengthLiningWorkDetailsGateway.GetTubeMaxHotHeadOriginal(workId);
decimal originalTubeMaxHotHeadPsi = fullLengthLiningWorkDetailsGateway.GetTubeMaxHotHeadPsiOriginal(workId);
decimal originalTubeIdealHead = fullLengthLiningWorkDetailsGateway.GetTubeIdealHeadOriginal(workId);
decimal originalTubeIdealHeadPsi = fullLengthLiningWorkDetailsGateway.GetTubeIdealHeadPsiOriginal(workId);
decimal originalNetResinForTube = fullLengthLiningWorkDetailsGateway.GetNetResinForTubeOriginal(workId);
decimal originalNetResinForTubeUsgals = fullLengthLiningWorkDetailsGateway.GetNetResinForTubeUsgalsOriginal(workId);
string originalNetResinForTubeDrumsIns = fullLengthLiningWorkDetailsGateway.GetNetResinForTubeDrumsInsOriginal(workId);
decimal originalNetResinForTubeLbsFt = fullLengthLiningWorkDetailsGateway.GetNetResinForTubeLbsFtOriginal(workId);
decimal originalNetResinForTubeUsgFt = fullLengthLiningWorkDetailsGateway.GetNetResinForTubeUsgFtOriginal(workId);
int originalExtraResinForMix = fullLengthLiningWorkDetailsGateway.GetExtraResinForMixOriginal(workId);
decimal originalExtraLbsForMix = fullLengthLiningWorkDetailsGateway.GetExtraLbsForMixOriginal(workId);
decimal originalTotalMixQuantity = fullLengthLiningWorkDetailsGateway.GetTotalMixQuantityOriginal(workId);
decimal originalTotalMixQuantityUsgals = fullLengthLiningWorkDetailsGateway.GetTotalMixQuantityUsgalsOriginal(workId);
string originalTotalMixQuantityDrumsIns = fullLengthLiningWorkDetailsGateway.GetTotalMixQuantityDrumsInsOriginal(workId);
string originalInversionType = fullLengthLiningWorkDetailsGateway.GetInversionTypeOriginal(workId);
decimal originalDepthOfInversionMH = fullLengthLiningWorkDetailsGateway.GetDepthOfInversionMHOriginal(workId);
decimal originalTubeForColumn = fullLengthLiningWorkDetailsGateway.GetTubeForColumnOriginal(workId);
decimal originalTubeForStartDry = fullLengthLiningWorkDetailsGateway.GetTubeForStartDryOriginal(workId);
decimal originalTotalTube = fullLengthLiningWorkDetailsGateway.GetTotalTubeOriginal(workId);
string originalDropTubeConnects = fullLengthLiningWorkDetailsGateway.GetDropTubeConnectsOriginal(workId);
decimal originalAllowsHeadTo = fullLengthLiningWorkDetailsGateway.GetAllowsHeadToOriginal(workId);
decimal originalRollerGap = fullLengthLiningWorkDetailsGateway.GetRollerGapOriginal(workId);
decimal originalHeightNeeded = fullLengthLiningWorkDetailsGateway.GetHeightNeededOriginal(workId);
string originalAvailable = fullLengthLiningWorkDetailsGateway.GetAvailableOriginal(workId);
string originalHoistHeight = fullLengthLiningWorkDetailsGateway.GetHoistHeightOriginal(workId);
string originalCommentsCipp = fullLengthLiningWorkDetailsGateway.GetCommentsCippOriginal(workId);
string originalResinLabel = fullLengthLiningWorkDetailsGateway.GetResinsLabelOriginal(workId);
string originalDrumContainsLabel = fullLengthLiningWorkDetailsGateway.GetDrumContainsLabelOriginal(workId);
string originalLinerTubeLabel = fullLengthLiningWorkDetailsGateway.GetLinerTubeLabelOriginal(workId);
string originalForLbDrumsLabel = fullLengthLiningWorkDetailsGateway.GetForLbDrumsLabelOriginal(workId);
string originalNetResinLabel = fullLengthLiningWorkDetailsGateway.GetNetResinLabelOriginal(workId);
string originalCatalystLabel = fullLengthLiningWorkDetailsGateway.GetCatalystLabelOriginal(workId);
// Wet Out new data
string newLinerTube = fullLengthLiningWorkDetailsGateway.GetLinerTube(workId);
int newResinID = fullLengthLiningWorkDetailsGateway.GetResinId(workId);
decimal newExcessResin = fullLengthLiningWorkDetailsGateway.GetExcessResin(workId);
string newPoundsDrums = fullLengthLiningWorkDetailsGateway.GetPoundsDrums(workId);
decimal newDrumDiameter = fullLengthLiningWorkDetailsGateway.GetDrumDiameter(workId);
decimal newHoistMaximumHeight = fullLengthLiningWorkDetailsGateway.GetHoistMaximumHeight(workId);
decimal newHoistMinimumHeight = fullLengthLiningWorkDetailsGateway.GetHoistMinimumHeight(workId);
decimal newDownDropTubeLenght = fullLengthLiningWorkDetailsGateway.GetDownDropTubeLenght(workId);
decimal newPumpHeightAboveGround = fullLengthLiningWorkDetailsGateway.GetPumpHeightAboveGround(workId);
int newTubeResinToFeltFactor = fullLengthLiningWorkDetailsGateway.GetTubeResinToFeltFactor(workId);
DateTime newDateOfSheet = fullLengthLiningWorkDetailsGateway.GetDateOfSheet(workId);
int newEmployeeID = fullLengthLiningWorkDetailsGateway.GetEmployeeId(workId);
string newRunDetails = fullLengthLiningWorkDetailsGateway.GetRunDetails(workId);
string newRunDetails2 = fullLengthLiningWorkDetailsGateway.GetRunDetails2(workId);
DateTime newWetOutDate = fullLengthLiningWorkDetailsGateway.GetWetOutDate(workId);
DateTime? newWetOutInstallDate = fullLengthLiningWorkDetailsGateway.GetWetOutInstallDate(workId);
string newThickness = fullLengthLiningWorkDetailsGateway.GetInversionThickness(workId);
decimal newLengthToLine = fullLengthLiningWorkDetailsGateway.GetLengthToLine(workId);
decimal newPlusExtra = fullLengthLiningWorkDetailsGateway.GetPlusExtra(workId);
decimal newForTurnOffset = fullLengthLiningWorkDetailsGateway.GetForTurnOffset(workId);
decimal newLengthToWetOut = fullLengthLiningWorkDetailsGateway.GetLengthToWetOut(workId);
decimal newTubeMaxColdHead = fullLengthLiningWorkDetailsGateway.GetTubeMaxColdHead(workId);
decimal newTubeMaxColdHeadPsi = fullLengthLiningWorkDetailsGateway.GetTubeMaxColdHeadPsi(workId);
decimal newTubeMaxHotHead = fullLengthLiningWorkDetailsGateway.GetTubeMaxHotHead(workId);
decimal newTubeMaxHotHeadPsi = fullLengthLiningWorkDetailsGateway.GetTubeMaxHotHeadPsi(workId);
decimal newTubeIdealHead = fullLengthLiningWorkDetailsGateway.GetTubeIdealHead(workId);
decimal newTubeIdealHeadPsi = fullLengthLiningWorkDetailsGateway.GetTubeIdealHeadPsi(workId);
decimal newNetResinForTube = fullLengthLiningWorkDetailsGateway.GetNetResinForTube(workId);
decimal newNetResinForTubeUsgals = fullLengthLiningWorkDetailsGateway.GetNetResinForTubeUsgals(workId);
string newNetResinForTubeDrumsIns = fullLengthLiningWorkDetailsGateway.GetNetResinForTubeDrumsIns(workId);
decimal newNetResinForTubeLbsFt = fullLengthLiningWorkDetailsGateway.GetNetResinForTubeLbsFt(workId);
decimal newNetResinForTubeUsgFt = fullLengthLiningWorkDetailsGateway.GetNetResinForTubeUsgFt(workId);
int newExtraResinForMix = fullLengthLiningWorkDetailsGateway.GetExtraResinForMix(workId);
decimal newExtraLbsForMix = fullLengthLiningWorkDetailsGateway.GetExtraLbsForMix(workId);
decimal newTotalMixQuantity = fullLengthLiningWorkDetailsGateway.GetTotalMixQuantity(workId);
decimal newTotalMixQuantityUsgals = fullLengthLiningWorkDetailsGateway.GetTotalMixQuantityUsgals(workId);
string newTotalMixQuantityDrumsIns = fullLengthLiningWorkDetailsGateway.GetTotalMixQuantityDrumsIns(workId);
string newInversionType = fullLengthLiningWorkDetailsGateway.GetInversionType(workId);
decimal newDepthOfInversionMH = fullLengthLiningWorkDetailsGateway.GetDepthOfInversionMH(workId);
decimal newTubeForColumn = fullLengthLiningWorkDetailsGateway.GetTubeForColumn(workId);
decimal newTubeForStartDry = fullLengthLiningWorkDetailsGateway.GetTubeForStartDry(workId);
decimal newTotalTube = fullLengthLiningWorkDetailsGateway.GetTotalTube(workId);
string newDropTubeConnects = fullLengthLiningWorkDetailsGateway.GetDropTubeConnects(workId);
decimal newAllowsHeadTo = fullLengthLiningWorkDetailsGateway.GetAllowsHeadTo(workId);
decimal newRollerGap = fullLengthLiningWorkDetailsGateway.GetRollerGap(workId);
decimal newHeightNeeded = fullLengthLiningWorkDetailsGateway.GetHeightNeeded(workId);
string newAvailable = fullLengthLiningWorkDetailsGateway.GetAvailable(workId);
string newHoistHeight = fullLengthLiningWorkDetailsGateway.GetHoistHeight(workId);
string newCommentsCipp = fullLengthLiningWorkDetailsGateway.GetCommentsCipp(workId);
string newResinLabel = fullLengthLiningWorkDetailsGateway.GetResinsLabel(workId);
string newDrumContainsLabel = fullLengthLiningWorkDetailsGateway.GetDrumContainsLabel(workId);
string newLinerTubeLabel = fullLengthLiningWorkDetailsGateway.GetLinerTubeLabel(workId);
string newForLbDrumsLabel = fullLengthLiningWorkDetailsGateway.GetForLbDrumsLabel(workId);
string newNetResinLabel = fullLengthLiningWorkDetailsGateway.GetNetResinLabel(workId);
string newCatalystLabel = fullLengthLiningWorkDetailsGateway.GetCatalystLabel(workId);
string originalInversionComment = "";
string originalPipeType = "";
string originalPipeCondition = "";
string originalGroundMoisture = "";
decimal originalBoilerSize = 0m;
decimal originalPumpTotalCapacity = 0m;
decimal originalLayFlatSize = 0m;
decimal originalLayFlatQuantityTotal = 0m;
decimal originalWaterStartTemp = 0m;
decimal originalTemp1 = 0m;
decimal originalHoldAtT1 = 0m;
decimal originalTempT2 = 0m;
decimal originalCookAtT2 = 0m;
decimal originalCoolDownFor = 0m;
decimal originalCoolToTemp = 0m;
decimal originalDropInPipeRun = 0m;
decimal originalPipeSlopOf = 0m;
decimal originalF45F120 = 0m;
decimal originalHold = 0m;
decimal originalF120F185 = 0m;
decimal originalCookTime = 0m;
decimal originalCoolTime = 0m;
decimal originalAproxTotal = 0m;
decimal originalWaterChangesPerHour = 0m;
decimal originalReturnWaterVelocity = 0m;
decimal originalLayflatBackPressure = 0m;
decimal originalPumpLiftAtIdealHead = 0m;
decimal originalWaterToFillLinerColumn = 0m;
decimal originalWaterPerFit = 0m;
string originalInstallationResults = "";
string originalInversionLinerTubeLabel = "";
string originalHeadsIdealLabel = "";
string originalPumpingAndCirculationLabel = "";
// Inversion new Data
string newInversionComment = "";
string newPipeType = "";
string newPipeCondition = "";
string newGroundMoisture = "";
decimal newBoilerSize = 0m;
decimal newPumpTotalCapacity = 0m;
decimal newLayFlatSize = 0m;
decimal newLayFlatQuantityTotal = 0m;
decimal newWaterStartTemp = 0m;
decimal newTemp1 = 0m;
decimal newHoldAtT1 = 0m;
decimal newTempT2 = 0m;
decimal newCookAtT2 = 0m;
decimal newCoolDownFor = 0m;
decimal newCoolToTemp = 0m;
decimal newDropInPipeRun = 0m;
decimal newPipeSlopOf = 0m;
decimal newF45F120 = 0m;
decimal newHold = 0m;
decimal newF120F185 = 0m;
decimal newCookTime = 0m;
decimal newCoolTime = 0m;
decimal newAproxTotal = 0m;
decimal newWaterChangesPerHour = 0m;
decimal newReturnWaterVelocity = 0m;
decimal newLayflatBackPressure = 0m;
decimal newPumpLiftAtIdealHead = 0m;
decimal newWaterToFillLinerColumn = 0m;
decimal newWaterPerFit = 0m;
string newInstallationResults = "";
string newInversionLinerTubeLabel = "";
string newHeadsIdealLabel = "";
string newPumpingAndCirculationLabel = "";
if (includeInversionInformation)
{
// InversionData original values
originalInversionComment = fullLengthLiningWorkDetailsGateway.GetInversionCommentOriginal(workId);
originalPipeType = fullLengthLiningWorkDetailsGateway.GetPipeTypeOriginal(workId);
originalPipeCondition = fullLengthLiningWorkDetailsGateway.GetPipeConditionOriginal(workId);
originalGroundMoisture = fullLengthLiningWorkDetailsGateway.GetGroundMoistureOriginal(workId);
originalBoilerSize = fullLengthLiningWorkDetailsGateway.GetBoilerSizeOriginal(workId);
originalPumpTotalCapacity = fullLengthLiningWorkDetailsGateway.GetPumpTotalCapacityOriginal(workId);
originalLayFlatSize = fullLengthLiningWorkDetailsGateway.GetLayFlatSizeOriginal(workId);
originalLayFlatQuantityTotal = fullLengthLiningWorkDetailsGateway.GetLayFlatQuantityTotalOriginal(workId);
originalWaterStartTemp = fullLengthLiningWorkDetailsGateway.GetWaterStartTempOriginal(workId);
originalTemp1 = fullLengthLiningWorkDetailsGateway.GetTemp1Original(workId);
originalHoldAtT1 = fullLengthLiningWorkDetailsGateway.GetHoldAtT1Original(workId);
originalTempT2 = fullLengthLiningWorkDetailsGateway.GetTempT2Original(workId);
originalCookAtT2 = fullLengthLiningWorkDetailsGateway.GetCookAtT2Original(workId);
originalCoolDownFor = fullLengthLiningWorkDetailsGateway.GetCoolDownForOriginal(workId);
originalCoolToTemp = fullLengthLiningWorkDetailsGateway.GetCoolToTempOriginal(workId);
originalDropInPipeRun = fullLengthLiningWorkDetailsGateway.GetDropInPipeRunOriginal(workId);
originalPipeSlopOf = fullLengthLiningWorkDetailsGateway.GetPipeSlopOfOriginal(workId);
originalF45F120 = fullLengthLiningWorkDetailsGateway.GetF45F120Original(workId);
originalHold = fullLengthLiningWorkDetailsGateway.GetHoldOriginal(workId);
originalF120F185 = fullLengthLiningWorkDetailsGateway.GetF120F185Original(workId);
originalCookTime = fullLengthLiningWorkDetailsGateway.GetCookTimeOriginal(workId);
originalCoolTime = fullLengthLiningWorkDetailsGateway.GetCoolTimeOriginal(workId);
originalAproxTotal = fullLengthLiningWorkDetailsGateway.GetAproxTotalOriginal(workId);
originalWaterChangesPerHour = fullLengthLiningWorkDetailsGateway.GetWaterChangesPerHourOriginal(workId);
originalReturnWaterVelocity = fullLengthLiningWorkDetailsGateway.GetReturnWaterVelocityOriginal(workId);
originalLayflatBackPressure = fullLengthLiningWorkDetailsGateway.GetLayflatBackPressureOriginal(workId);
originalPumpLiftAtIdealHead = fullLengthLiningWorkDetailsGateway.GetPumpLiftAtIdealHeadOriginal(workId);
originalWaterToFillLinerColumn = fullLengthLiningWorkDetailsGateway.GetWaterToFillLinerColumnOriginal(workId);
originalWaterPerFit = fullLengthLiningWorkDetailsGateway.GetWaterPerFitOriginal(workId);
originalInstallationResults = fullLengthLiningWorkDetailsGateway.GetInstallationResultsOriginal(workId);
originalInversionLinerTubeLabel = fullLengthLiningWorkDetailsGateway.GetInversionLinerTubeLabelOriginal(workId);
originalHeadsIdealLabel = fullLengthLiningWorkDetailsGateway.GetHeadsIdealLabelOriginal(workId);
originalPumpingAndCirculationLabel = fullLengthLiningWorkDetailsGateway.GetPumpingAndCirculationLabelOriginal(workId);
// Inversion new Data
newInversionComment = fullLengthLiningWorkDetailsGateway.GetInversionComment(workId);
newPipeType = fullLengthLiningWorkDetailsGateway.GetPipeType(workId);
newPipeCondition = fullLengthLiningWorkDetailsGateway.GetPipeCondition(workId);
newGroundMoisture = fullLengthLiningWorkDetailsGateway.GetGroundMoisture(workId);
newBoilerSize = fullLengthLiningWorkDetailsGateway.GetBoilerSize(workId);
newPumpTotalCapacity = fullLengthLiningWorkDetailsGateway.GetPumpTotalCapacity(workId);
newLayFlatSize = fullLengthLiningWorkDetailsGateway.GetLayFlatSize(workId);
newLayFlatQuantityTotal = fullLengthLiningWorkDetailsGateway.GetLayFlatQuantityTotal(workId);
newWaterStartTemp = fullLengthLiningWorkDetailsGateway.GetWaterStartTemp(workId);
newTemp1 = fullLengthLiningWorkDetailsGateway.GetTemp1(workId);
newHoldAtT1 = fullLengthLiningWorkDetailsGateway.GetHoldAtT1(workId);
newTempT2 = fullLengthLiningWorkDetailsGateway.GetTempT2(workId);
newCookAtT2 = fullLengthLiningWorkDetailsGateway.GetCookAtT2(workId);
newCoolDownFor = fullLengthLiningWorkDetailsGateway.GetCoolDownFor(workId);
newCoolToTemp = fullLengthLiningWorkDetailsGateway.GetCoolToTemp(workId);
newDropInPipeRun = fullLengthLiningWorkDetailsGateway.GetDropInPipeRun(workId);
newPipeSlopOf = fullLengthLiningWorkDetailsGateway.GetPipeSlopOf(workId);
newF45F120 = fullLengthLiningWorkDetailsGateway.GetF45F120(workId);
newHold = fullLengthLiningWorkDetailsGateway.GetHold(workId);
newF120F185 = fullLengthLiningWorkDetailsGateway.GetF120F185(workId);
newCookTime = fullLengthLiningWorkDetailsGateway.GetCookTime(workId);
newCoolTime = fullLengthLiningWorkDetailsGateway.GetCoolTime(workId);
newAproxTotal = fullLengthLiningWorkDetailsGateway.GetAproxTotal(workId);
newWaterChangesPerHour = fullLengthLiningWorkDetailsGateway.GetWaterChangesPerHour(workId);
newReturnWaterVelocity = fullLengthLiningWorkDetailsGateway.GetReturnWaterVelocity(workId);
newLayflatBackPressure = fullLengthLiningWorkDetailsGateway.GetLayflatBackPressure(workId);
newPumpLiftAtIdealHead = fullLengthLiningWorkDetailsGateway.GetPumpLiftAtIdealHead(workId);
newWaterToFillLinerColumn = fullLengthLiningWorkDetailsGateway.GetWaterToFillLinerColumn(workId);
newWaterPerFit = fullLengthLiningWorkDetailsGateway.GetWaterPerFit(workId);
newInstallationResults = fullLengthLiningWorkDetailsGateway.GetInstallationResults(workId);
newInversionLinerTubeLabel = fullLengthLiningWorkDetailsGateway.GetInversionLinerTubeLabel(workId);
newHeadsIdealLabel = fullLengthLiningWorkDetailsGateway.GetHeadsIdealLabel(workId);
newPumpingAndCirculationLabel = fullLengthLiningWorkDetailsGateway.GetPumpingAndCirculationLabel(workId);
}
// Get All sectionIds for insert
string runDetails = row.RunDetails;
string[] runDetailsList = runDetails.Split('>');
for (int i = 0; i < runDetailsList.Length; i++)
{
AssetSewerSectionGateway assetSewerSectionGateway = new AssetSewerSectionGateway();
string sectionId = runDetailsList[i].ToString();
assetSewerSectionGateway.LoadBySectionId(sectionId, companyId);
int assetId = assetSewerSectionGateway.GetAssetID(sectionId);
WorkGateway workGateway = new WorkGateway();
int newWorkId = 0;
workGateway.LoadByProjectIdAssetIdWorkType(projectId, assetId, "Full Length Lining", companyId);
if (workGateway.Table.Rows.Count > 0)
{
newWorkId = workGateway.GetWorkId(assetId, "Full Length Lining", projectId);
}
WorkFullLengthLiningWetOutGateway workFullLengthLiningWetOutGatewayForReview = new WorkFullLengthLiningWetOutGateway();
workFullLengthLiningWetOutGatewayForReview.LoadByWorkId(newWorkId, companyId);
if (workFullLengthLiningWetOutGatewayForReview.Table.Rows.Count > 0)
{
// Update work with cipp information
UpdateWorkWetOutInformation(newWorkId, originalLinerTube, originalResinID, originalExcessResin, originalPoundsDrums, originalDrumDiameter, originalHoistMaximumHeight, originalHoistMinimumHeight, originalDownDropTubeLenght, originalPumpHeightAboveGround, originalTubeResinToFeltFactor, originalDateOfSheet, originalEmployeeID, originalRunDetails, originalRunDetails2, originalWetOutDate, originalWetOutInstallDate, originalThickness, originalLengthToLine, originalPlusExtra, originalForTurnOffset, originalLengthToWetOut, originalTubeMaxColdHead, originalTubeMaxColdHeadPsi, originalTubeMaxHotHead, originalTubeMaxHotHeadPsi, originalTubeIdealHead, originalTubeIdealHeadPsi, originalNetResinForTube, originalNetResinForTubeUsgals, originalNetResinForTubeDrumsIns, originalNetResinForTubeLbsFt, originalNetResinForTubeUsgFt, originalExtraResinForMix, originalExtraLbsForMix, originalTotalMixQuantity, originalTotalMixQuantityUsgals, originalTotalMixQuantityDrumsIns, originalInversionType, originalDepthOfInversionMH, originalTubeForColumn, originalTubeForStartDry, originalTotalTube, originalDropTubeConnects, originalAllowsHeadTo, originalRollerGap, originalHeightNeeded, originalAvailable, originalHoistHeight, originalCommentsCipp, originalResinLabel, originalDrumContainsLabel, originalLinerTubeLabel, originalForLbDrumsLabel, originalNetResinLabel, originalCatalystLabel, originalInversionComment, originalPipeType, originalPipeCondition, originalGroundMoisture, originalBoilerSize, originalPumpTotalCapacity, originalLayFlatSize, originalLayFlatQuantityTotal, originalWaterStartTemp, originalTemp1, originalHoldAtT1, originalTempT2, originalCookAtT2, originalCoolDownFor, originalCoolToTemp, originalDropInPipeRun, originalPipeSlopOf, originalF45F120, originalHold, originalF120F185, originalCookTime, originalCoolTime, originalAproxTotal, originalWaterChangesPerHour, originalReturnWaterVelocity, originalLayflatBackPressure, originalPumpLiftAtIdealHead, originalWaterToFillLinerColumn, originalWaterPerFit, originalInstallationResults, originalInversionLinerTubeLabel, originalHeadsIdealLabel, originalPumpingAndCirculationLabel, false, companyId, newLinerTube, newResinID, newExcessResin, newPoundsDrums, newDrumDiameter, newHoistMaximumHeight, newHoistMinimumHeight, newDownDropTubeLenght, newPumpHeightAboveGround, newTubeResinToFeltFactor, newDateOfSheet, newEmployeeID, newRunDetails, newRunDetails2, newWetOutDate, newWetOutInstallDate, newThickness, newLengthToLine, newPlusExtra, newForTurnOffset, newLengthToWetOut, newTubeMaxColdHead, newTubeMaxColdHeadPsi, newTubeMaxHotHead, newTubeMaxHotHeadPsi, newTubeIdealHead, newTubeIdealHeadPsi, newNetResinForTube, newNetResinForTubeUsgals, newNetResinForTubeDrumsIns, newNetResinForTubeLbsFt, newNetResinForTubeUsgFt, newExtraResinForMix, newExtraLbsForMix, newTotalMixQuantity, newTotalMixQuantityUsgals, newTotalMixQuantityDrumsIns, newInversionType, newDepthOfInversionMH, newTubeForColumn, newTubeForStartDry, newTotalTube, newDropTubeConnects, newAllowsHeadTo, newRollerGap, newHeightNeeded, newAvailable, newHoistHeight, newCommentsCipp, newResinLabel, newDrumContainsLabel, newLinerTubeLabel, newForLbDrumsLabel, newNetResinLabel, newCatalystLabel, newInversionComment, newPipeType, newPipeCondition, newGroundMoisture, newBoilerSize, newPumpTotalCapacity, newLayFlatSize, newLayFlatQuantityTotal, newWaterStartTemp, newTemp1, newHoldAtT1, newTempT2, newCookAtT2, newCoolDownFor, newCoolToTemp, newDropInPipeRun, newPipeSlopOf, newF45F120, newHold, newF120F185, newCookTime, newCoolTime, newAproxTotal, newWaterChangesPerHour, newReturnWaterVelocity, newLayflatBackPressure, newPumpLiftAtIdealHead, newWaterToFillLinerColumn, newWaterPerFit, newInstallationResults, newInversionLinerTubeLabel, newHeadsIdealLabel, newPumpingAndCirculationLabel, false, companyId, includeWetOutInformation, includeInversionInformation);
}
else
{
// ... Insert wet out data
string inversionComment = fullLengthLiningWorkDetailsGateway.GetInversionComment(workId);
string installationResults = fullLengthLiningWorkDetailsGateway.GetInstallationResults(workId);
DateTime? wetOutInstallDate = fullLengthLiningWorkDetailsGateway.GetWetOutInstallDate(workId);
InsertWorkWetOutInformation(newWorkId, row.LinerTube, row.ResinID, row.ExcessResin, row.PoundsDrums, row.DrumDiameter, row.HoistMaximumHeight, row.HoistMinimumHeight, row.DownDropTubeLenght, row.PumpHeightAboveGround, row.TubeResinToFeltFactor, row.DateOfSheet, row.EmployeeID, row.RunDetails, row.RunDetails2, row.WetOutDate, wetOutInstallDate, row.Thickness, row.LengthToLine, row.PlusExtra, row.ForTurnOffset, row.LengthToWetOut, row.TubeMaxColdHead, row.TubeMaxColdHeadPsi, row.TubeMaxHotHead, row.TubeMaxHotHeadPsi, row.TubeIdealHead, row.TubeIdealHeadPsi, row.NetResinForTube, row.NetResinForTubeUsgals, row.NetResinForTubeDrumsIns, row.NetResinForTubeLbsFt, row.NetResinForTubeUsgFt, row.ExtraResinForMix, row.ExtraLbsForMix, row.TotalMixQuantity, row.TotalMixQuantityUsgals, row.TotalMixQuantityDrumsIns, row.InversionType, row.DepthOfInversionMH, row.TubeForColumn, row.TubeForStartDry, row.TotalTube, row.DropTubeConnects, row.AllowsHeadTo, row.RollerGap, row.HeightNeeded, row.Available, row.HoistHeight, row.CommentsCipp, row.ResinsLabel, row.DrumContainsLabel, row.LinerTubeLabel, row.ForLbDrumsLabel, row.NetResinLabel, row.CatalystLabel, inversionComment, row.PipeType, row.PipeCondition, row.GroundMoisture, row.BoilerSize, row.PumpTotalCapacity, row.LayFlatSize, row.LayFlatQuantityTotal, row.WaterStartTemp, row.Temp1, row.HoldAtT1, row.TempT2, row.CookAtT2, row.CoolDownFor, row.CoolToTemp, row.DropInPipeRun, row.PipeSlopOf, row.F45F120, row.Hold, row.F120F185, row.CookTime, row.CoolTime, row.AproxTotal, row.WaterChangesPerHour, row.ReturnWaterVelocity, row.LayflatBackPressure, row.PumpLiftAtIdealHead, row.WaterToFillLinerColumn, row.WaterPerFit, installationResults, row.InversionLinerTubeLabel, row.HeadsIdealLabel, row.PumpingAndCirculationLabel, row.Deleted, row.COMPANY_ID, includeWetOutInformation, includeInversionInformation);
}
}
}
else
{
// Get All sectionIds for insert
string runDetails = row.RunDetails;
string[] runDetailsList = runDetails.Split('>');
for (int i = 0; i < runDetailsList.Length; i++)
{
AssetSewerSectionGateway assetSewerSectionGateway = new AssetSewerSectionGateway();
string sectionId = runDetailsList[i].ToString();
assetSewerSectionGateway.LoadBySectionId(sectionId, companyId);
int assetId = assetSewerSectionGateway.GetAssetID(sectionId);
WorkGateway workGateway = new WorkGateway();
workGateway.LoadByProjectIdAssetIdWorkType(projectId, assetId, "Full Length Lining", companyId);
if (workGateway.Table.Rows.Count > 0)
{
int newWorkId = workGateway.GetWorkId(assetId, "Full Length Lining", projectId);
// ... Insert wet out data
string inversionComment = fullLengthLiningWorkDetailsGateway.GetInversionComment(workId);
string installationResults = fullLengthLiningWorkDetailsGateway.GetInstallationResults(workId);
DateTime? wetOutInstallDate = fullLengthLiningWorkDetailsGateway.GetWetOutInstallDate(workId);
InsertWorkWetOutInformation(newWorkId, row.LinerTube, row.ResinID, row.ExcessResin, row.PoundsDrums, row.DrumDiameter, row.HoistMaximumHeight, row.HoistMinimumHeight, row.DownDropTubeLenght, row.PumpHeightAboveGround, row.TubeResinToFeltFactor, row.DateOfSheet, row.EmployeeID, row.RunDetails, row.RunDetails2, row.WetOutDate, wetOutInstallDate, row.Thickness, row.LengthToLine, row.PlusExtra, row.ForTurnOffset, row.LengthToWetOut, row.TubeMaxColdHead, row.TubeMaxColdHeadPsi, row.TubeMaxHotHead, row.TubeMaxHotHeadPsi, row.TubeIdealHead, row.TubeIdealHeadPsi, row.NetResinForTube, row.NetResinForTubeUsgals, row.NetResinForTubeDrumsIns, row.NetResinForTubeLbsFt, row.NetResinForTubeUsgFt, row.ExtraResinForMix, row.ExtraLbsForMix, row.TotalMixQuantity, row.TotalMixQuantityUsgals, row.TotalMixQuantityDrumsIns, row.InversionType, row.DepthOfInversionMH, row.TubeForColumn, row.TubeForStartDry, row.TotalTube, row.DropTubeConnects, row.AllowsHeadTo, row.RollerGap, row.HeightNeeded, row.Available, row.HoistHeight, row.CommentsCipp, row.ResinsLabel, row.DrumContainsLabel, row.LinerTubeLabel, row.ForLbDrumsLabel, row.NetResinLabel, row.CatalystLabel, inversionComment, row.PipeType, row.PipeCondition, row.GroundMoisture, row.BoilerSize, row.PumpTotalCapacity, row.LayFlatSize, row.LayFlatQuantityTotal, row.WaterStartTemp, row.Temp1, row.HoldAtT1, row.TempT2, row.CookAtT2, row.CoolDownFor, row.CoolToTemp, row.DropInPipeRun, row.PipeSlopOf, row.F45F120, row.Hold, row.F120F185, row.CookTime, row.CoolTime, row.AproxTotal, row.WaterChangesPerHour, row.ReturnWaterVelocity, row.LayflatBackPressure, row.PumpLiftAtIdealHead, row.WaterToFillLinerColumn, row.WaterPerFit, installationResults, row.InversionLinerTubeLabel, row.HeadsIdealLabel, row.PumpingAndCirculationLabel, row.Deleted, row.COMPANY_ID, includeWetOutInformation, includeInversionInformation);
}
}
}
}
// Update JL Section WorkID
int sectionWorkId = 0;
WorkGateway workGatewayForJL = new WorkGateway();
workGatewayForJL.LoadByProjectIdAssetIdWorkType(projectId, sectionAssetId, "Junction Lining Section", companyId);
if (workGatewayForJL.Table.Rows.Count > 0)
{
sectionWorkId = workGatewayForJL.GetWorkId(sectionAssetId, "Junction Lining Section", projectId);
WorkJunctionLiningSectionGateway workJunctionLiningSectionGateway = new WorkJunctionLiningSectionGateway();
workJunctionLiningSectionGateway.LoadByWorkId(sectionWorkId, companyId);
// get old values of section
int numLats = workJunctionLiningSectionGateway.GetNumLats(sectionWorkId);
int notLinedYet = workJunctionLiningSectionGateway.GetNotLinedYet(sectionWorkId);
bool allMeasured = workJunctionLiningSectionGateway.GetAllMeasured(sectionWorkId);
bool deleted = workJunctionLiningSectionGateway.GetDeleted(sectionWorkId);
string issueWithLaterals = workJunctionLiningSectionGateway.GetIssueWithLaterals(sectionWorkId);
int notMeasuredYet = workJunctionLiningSectionGateway.GetNotMeasuredYet(sectionWorkId);
int notDeliveredYet = workJunctionLiningSectionGateway.GetNotDeliveredYet(sectionWorkId);
string trafficControl = workJunctionLiningSectionGateway.GetTrafficControl(sectionWorkId);
string trafficControlDetails = workJunctionLiningSectionGateway.GetTrafficControlDetails(sectionWorkId);
bool standardBypass = workJunctionLiningSectionGateway.GetStandardBypass(sectionWorkId);
string standardBypassComments = workJunctionLiningSectionGateway.GetStandardBypassComments(sectionWorkId);
int availableToLine = workJunctionLiningSectionGateway.GetAvailableToLine(sectionWorkId);
WorkJunctionLiningSection workJunctionLiningSection = new WorkJunctionLiningSection(null);
workJunctionLiningSection.UpdateDirect(sectionWorkId, numLats, notLinedYet, allMeasured, deleted, issueWithLaterals, notMeasuredYet, notDeliveredYet, companyId, trafficControl, trafficControlDetails, standardBypass, standardBypassComments, availableToLine, numLats, notLinedYet, allMeasured, issueWithLaterals, notMeasuredYet, notDeliveredYet, newTrafficControl, newTrafficControlDetails, newStandardBypass, newStandardBypassComments, availableToLine);
}
}
}
}
/// <summary>
/// Save
/// </summary>
/// <param name="countryId">countryId</param>
/// <param name="provinceId">provinceId</param>
/// <param name="countyId">countyId</param>
/// <param name="cityId">cityId</param>
/// <param name="projectId">projectId</param>
/// <param name="companyId">companyId</param>
/// <param name="sectionAssetId">sectionAssetId</param>
public void Save(Int64? countryId, Int64? provinceId, Int64? countyId, Int64? cityId, int projectId, int companyId, int sectionAssetId)
{
RehabAssessmentTDS rehabAssessmentChanges = (RehabAssessmentTDS)Data.GetChanges();
if (rehabAssessmentChanges.WorkDetails.Rows.Count > 0)
{
RehabAssessmentWorkDetailsGateway rehabAssessmentWorkDetailsGateway = new RehabAssessmentWorkDetailsGateway(rehabAssessmentChanges);
// Update sections
foreach (RehabAssessmentTDS.WorkDetailsRow workDetailsRow in (RehabAssessmentTDS.WorkDetailsDataTable)rehabAssessmentChanges.WorkDetails)
{
// Unchanged values
int workId = workDetailsRow.WorkID;
// Original values
// ... General
string originalClientId = rehabAssessmentWorkDetailsGateway.GetClientIdOriginal(workId);
DateTime? originalPreFlushDate = rehabAssessmentWorkDetailsGateway.GetPreFlushDateOriginal(workId);
DateTime? originalPreVideoDate = rehabAssessmentWorkDetailsGateway.GetPreVideoDateOriginal(workId);
// ... P1
DateTime? originalP1Date = rehabAssessmentWorkDetailsGateway.GetP1DateOriginal(workId);
int? originalCxisRemoved = rehabAssessmentWorkDetailsGateway.GetCxisRemovedOriginal(workId);
bool originalRoboticPrepCompleted = rehabAssessmentWorkDetailsGateway.GetRoboticPrepCompletedOriginal(workId);
DateTime? originalRoboticPrepCompletedDate = rehabAssessmentWorkDetailsGateway.GetRoboticPrepCompletedDateOriginal(workId);
bool originalP1Completed = rehabAssessmentWorkDetailsGateway.GetP1CompletedOriginal(workId);
// ... M1
DateTime? originalM1Date = rehabAssessmentWorkDetailsGateway.GetM1DateOriginal(workId);
string originalMeasurementTakenBy = rehabAssessmentWorkDetailsGateway.GetMeasurementTakenByOriginal(workId);
string originalTrafficControl = rehabAssessmentWorkDetailsGateway.GetTrafficControlOriginal(workId);
string originalSiteDetails = rehabAssessmentWorkDetailsGateway.GetSiteDetailsOriginal(workId);
bool originalPipeSizeChange = rehabAssessmentWorkDetailsGateway.GetPipeSizeChange(workId);
bool originalStandardBypass = rehabAssessmentWorkDetailsGateway.GetStandardBypass(workId);
string originalStandardBypassComments = rehabAssessmentWorkDetailsGateway.GetStandardBypassCommentsOriginal(workId);
string originalTrafficControlDetails = rehabAssessmentWorkDetailsGateway.GetTrafficControlDetailsOriginal(workId);
string originalMeasurementType = rehabAssessmentWorkDetailsGateway.GetMeasurementTypeOriginal(workId);
string originalMeasurementFromMh = rehabAssessmentWorkDetailsGateway.GetMeasurementFromMhOriginal(workId);
string originalVideoDoneFromMh = rehabAssessmentWorkDetailsGateway.GetVideoDoneFromMhOriginal(workId);
string originalVideoDoneToMh = rehabAssessmentWorkDetailsGateway.GetVideoDoneToMhOriginal(workId);
string originalMaterial = rehabAssessmentWorkDetailsGateway.GetMaterialOriginal(workId);
string originalAccessType = rehabAssessmentWorkDetailsGateway.GetAccessTypeOriginal(workId);
// ... Comments
string originalComments = rehabAssessmentWorkDetailsGateway.GetCommentsOriginal(workId);
// ... M2
string originalVideoDistance = rehabAssessmentWorkDetailsGateway.GetVideoDistanceOriginal(workId);
// New variables
// ... General
string newClientId = rehabAssessmentWorkDetailsGateway.GetClientId(workId);
// ... P1
DateTime? newP1Date = rehabAssessmentWorkDetailsGateway.GetP1Date(workId);
int? newCxisRemoved = rehabAssessmentWorkDetailsGateway.GetCxisRemoved(workId);
bool newRoboticPrepCompleted = rehabAssessmentWorkDetailsGateway.GetRoboticPrepCompleted(workId);
DateTime? newRoboticPrepCompletedDate = rehabAssessmentWorkDetailsGateway.GetRoboticPrepCompletedDate(workId);
bool newP1Completed = rehabAssessmentWorkDetailsGateway.GetP1Completed(workId);
// ... M1
DateTime? newM1Date = rehabAssessmentWorkDetailsGateway.GetM1Date(workId);
string newMeasurementTakenBy = rehabAssessmentWorkDetailsGateway.GetMeasurementTakenBy(workId);
string newTrafficControl = rehabAssessmentWorkDetailsGateway.GetTrafficControl(workId);
string newSiteDetails = rehabAssessmentWorkDetailsGateway.GetSiteDetails(workId);
bool newPipeSizeChange = rehabAssessmentWorkDetailsGateway.GetPipeSizeChange(workId);
bool newStandardBypass = rehabAssessmentWorkDetailsGateway.GetStandardBypass(workId);
string newStandardBypassComments = rehabAssessmentWorkDetailsGateway.GetStandardBypassComments(workId);
string newTrafficControlDetails = rehabAssessmentWorkDetailsGateway.GetTrafficControlDetails(workId);
string newMeasurementType = rehabAssessmentWorkDetailsGateway.GetMeasurementType(workId);
string newMeasurementFromMh = rehabAssessmentWorkDetailsGateway.GetMeasurementFromMh(workId);
string newVideoDoneFromMh = rehabAssessmentWorkDetailsGateway.GetVideoDoneFromMh(workId);
string newVideoDoneToMh = rehabAssessmentWorkDetailsGateway.GetVideoDoneToMh(workId);
string newMaterial = rehabAssessmentWorkDetailsGateway.GetMaterial(workId);
string newAccessType = rehabAssessmentWorkDetailsGateway.GetAccessType(workId);
// ... M2
string newVideoDistance = rehabAssessmentWorkDetailsGateway.GetVideoDistance(workId);
// ... Comments
string newComments = rehabAssessmentWorkDetailsGateway.GetComments(workId);
// ... RA
DateTime? newPreFlushDate = rehabAssessmentWorkDetailsGateway.GetPreFlushDate(workId);
DateTime? newPreVideoDate = rehabAssessmentWorkDetailsGateway.GetPreVideoDate(workId);
// ... FLL WorkID
int workIdFll = 0; if (!workDetailsRow.IsWorkIDFllNull()) workIdFll = workDetailsRow.WorkIDFll;
if (workIdFll != 0) // ... Has Fll work
{
WorkFullLengthLiningGateway workFullLengthLiningGateway = new WorkFullLengthLiningGateway();
workFullLengthLiningGateway.LoadByWorkId(workIdFll, companyId);
DateTime? originalProposedLiningDate = workFullLengthLiningGateway.GetProposedLiningDate(workIdFll);
DateTime? originalDeadlineLiningDate = workFullLengthLiningGateway.GetDeadlineLiningDate(workIdFll);
DateTime? originalM2Date = workFullLengthLiningGateway.GetM2Date(workIdFll);
DateTime? originalInstallDate = workFullLengthLiningGateway.GetInstallDate(workIdFll);
DateTime? originalFinalVideoDate = workFullLengthLiningGateway.GetFinalVideoDate(workIdFll);
bool originalIssueIdentified = workFullLengthLiningGateway.GetIssueIdentified(workIdFll);
bool originalIssueLFS = workFullLengthLiningGateway.GetIssueLFS(workIdFll);
bool originalIssueClient = workFullLengthLiningGateway.GetIssueClient(workIdFll);
bool originalIssueSales = workFullLengthLiningGateway.GetIssueSales(workIdFll);
bool originalIssueGivenToClient = workFullLengthLiningGateway.GetIssueGivenToClient(workIdFll);
bool originalIssueResolved = workFullLengthLiningGateway.GetIssueResolved(workIdFll);
bool originalIssueInvestigation = workFullLengthLiningGateway.GetIssueInvestigation(workIdFll);
// ... Update work
UpdateFllWork(sectionAssetId, countryId, provinceId, countyId, cityId, workIdFll, originalClientId, originalProposedLiningDate, originalDeadlineLiningDate, originalP1Date, originalM1Date, originalM2Date, originalInstallDate, originalFinalVideoDate, originalIssueIdentified, originalIssueLFS, originalIssueClient, originalIssueSales, originalIssueGivenToClient, originalIssueResolved, originalIssueInvestigation, originalCxisRemoved, originalRoboticPrepCompleted, originalRoboticPrepCompletedDate, originalMeasurementTakenBy, originalTrafficControl, originalSiteDetails, originalPipeSizeChange, originalStandardBypass, originalStandardBypassComments, originalTrafficControlDetails, originalMeasurementType, originalMeasurementFromMh, originalVideoDoneFromMh, originalVideoDoneToMh, originalVideoDistance, originalComments, false, companyId, originalMaterial, originalAccessType, originalP1Completed, newClientId, originalProposedLiningDate, originalDeadlineLiningDate, newP1Date, newM1Date, originalM2Date, originalInstallDate, originalFinalVideoDate, originalIssueIdentified, originalIssueLFS, originalIssueClient, originalIssueSales, originalIssueGivenToClient, originalIssueResolved, originalIssueInvestigation, newCxisRemoved, newRoboticPrepCompleted, newRoboticPrepCompletedDate, newMeasurementTakenBy, newMaterial, newTrafficControl, newSiteDetails, newPipeSizeChange, newStandardBypass, newStandardBypassComments, newTrafficControlDetails, newMeasurementType, newMeasurementFromMh, newVideoDoneFromMh, newVideoDoneToMh, newVideoDistance, newComments, false, companyId, newAccessType, newP1Completed);
UpdateRaWork(workId, originalPreFlushDate, originalPreVideoDate, newPreFlushDate, newPreVideoDate, companyId);
}
else
{
if (newClientId != "" || newP1Date.HasValue || newCxisRemoved.HasValue || newM1Date.HasValue || newMeasurementTakenBy != "" || newMaterial != "" || newTrafficControl != "" || newMeasurementType != "" || newMeasurementFromMh != "" || newVideoDoneFromMh != "" || newVideoDoneToMh != "" || newStandardBypassComments != "" || newTrafficControlDetails != "" || newVideoDistance != "") // Insert Fll work
{
WorkFullLengthLining workFullLengthLining = new WorkFullLengthLining(null);
workIdFll = workFullLengthLining.InsertDirectEmptyWorks(projectId, sectionAssetId, null, "", null, null, null, null, null, null, null, false, false, false, false, false, false, false, companyId, false, "", "");
WorkFullLengthLiningGateway workFullLengthLiningGateway = new WorkFullLengthLiningGateway();
workFullLengthLiningGateway.LoadByWorkId(workIdFll, companyId);
DateTime? originalProposedLiningDate = workFullLengthLiningGateway.GetProposedLiningDate(workIdFll);
DateTime? originalDeadlineLiningDate = workFullLengthLiningGateway.GetDeadlineLiningDate(workIdFll);
DateTime? originalM2Date = workFullLengthLiningGateway.GetM2Date(workIdFll);
DateTime? originalInstallDate = workFullLengthLiningGateway.GetInstallDate(workIdFll);
DateTime? originalFinalVideoDate = workFullLengthLiningGateway.GetFinalVideoDate(workIdFll);
bool originalIssueIdentified = workFullLengthLiningGateway.GetIssueIdentified(workIdFll);
bool originalIssueLFS = workFullLengthLiningGateway.GetIssueLFS(workIdFll);
bool originalIssueClient = workFullLengthLiningGateway.GetIssueClient(workIdFll);
bool originalIssueSales = workFullLengthLiningGateway.GetIssueSales(workIdFll);
bool originalIssueGivenToClient = workFullLengthLiningGateway.GetIssueGivenToClient(workIdFll);
bool originalIssueResolved = workFullLengthLiningGateway.GetIssueResolved(workIdFll);
bool originalIssueInvestigation = workFullLengthLiningGateway.GetIssueInvestigation(workIdFll);
// ... Update work
UpdateFllWork(sectionAssetId, countryId, provinceId, countyId, cityId, workIdFll, originalClientId, originalProposedLiningDate, originalDeadlineLiningDate, originalP1Date, originalM1Date, originalM2Date, originalInstallDate, originalFinalVideoDate, originalIssueIdentified, originalIssueLFS, originalIssueClient, originalIssueSales, originalIssueGivenToClient, originalIssueResolved, originalIssueInvestigation, originalCxisRemoved, originalRoboticPrepCompleted, originalRoboticPrepCompletedDate, originalMeasurementTakenBy, originalTrafficControl, originalSiteDetails, originalPipeSizeChange, originalStandardBypass, originalStandardBypassComments, originalTrafficControlDetails, originalMeasurementType, originalMeasurementFromMh, originalVideoDoneFromMh, originalVideoDoneToMh, originalVideoDistance, originalComments, false, companyId, originalMaterial, originalAccessType, originalP1Completed, newClientId, originalProposedLiningDate, originalDeadlineLiningDate, newP1Date, newM1Date, originalM2Date, originalInstallDate, originalFinalVideoDate, originalIssueIdentified, originalIssueLFS, originalIssueClient, originalIssueSales, originalIssueGivenToClient, originalIssueResolved, originalIssueInvestigation, newCxisRemoved, newRoboticPrepCompleted, newRoboticPrepCompletedDate, newMeasurementTakenBy, newMaterial, newTrafficControl, newSiteDetails, newPipeSizeChange, newStandardBypass, newStandardBypassComments, newTrafficControlDetails, newMeasurementType, newMeasurementFromMh, newVideoDoneFromMh, newVideoDoneToMh, newVideoDistance, newComments, false, companyId, newAccessType, newP1Completed);
UpdateRaWork(workId, originalPreFlushDate, originalPreVideoDate, newPreFlushDate, newPreVideoDate, companyId);
}
else // ... Do not have Fll work
{
UpdateRaWork(workId, originalPreFlushDate, originalPreVideoDate, newPreFlushDate, newPreVideoDate, companyId);
}
}
// JL Section WorkID
int sectionWorkId = 0;
WorkGateway workGatewayForJL = new WorkGateway();
workGatewayForJL.LoadByProjectIdAssetIdWorkType(projectId, sectionAssetId, "Junction Lining Section", companyId);
if (workGatewayForJL.Table.Rows.Count > 0)
{
sectionWorkId = workGatewayForJL.GetWorkId(sectionAssetId, "Junction Lining Section", projectId);
WorkJunctionLiningSectionGateway workJunctionLiningSectionGateway = new WorkJunctionLiningSectionGateway();
workJunctionLiningSectionGateway.LoadByWorkId(sectionWorkId, companyId);
// get old values of section
int numLats = workJunctionLiningSectionGateway.GetNumLats(sectionWorkId);
int notLinedYet = workJunctionLiningSectionGateway.GetNotLinedYet(sectionWorkId);
bool allMeasured = workJunctionLiningSectionGateway.GetAllMeasured(sectionWorkId);
bool deleted = workJunctionLiningSectionGateway.GetDeleted(sectionWorkId);
string issueWithLaterals = workJunctionLiningSectionGateway.GetIssueWithLaterals(sectionWorkId);
int notMeasuredYet = workJunctionLiningSectionGateway.GetNotMeasuredYet(sectionWorkId);
int notDeliveredYet = workJunctionLiningSectionGateway.GetNotDeliveredYet(sectionWorkId);
string trafficControl = workJunctionLiningSectionGateway.GetTrafficControl(sectionWorkId);
string trafficControlDetails = workJunctionLiningSectionGateway.GetTrafficControlDetails(sectionWorkId);
bool standardBypass = workJunctionLiningSectionGateway.GetStandardBypass(sectionWorkId);
string standardBypassComments = workJunctionLiningSectionGateway.GetStandardBypassComments(sectionWorkId);
int availableToLine = workJunctionLiningSectionGateway.GetAvailableToLine(sectionWorkId);
WorkJunctionLiningSection workJunctionLiningSection = new WorkJunctionLiningSection(null);
workJunctionLiningSection.UpdateDirect(sectionWorkId, numLats, notLinedYet, allMeasured, deleted, issueWithLaterals, notMeasuredYet, notDeliveredYet, companyId, trafficControl, trafficControlDetails, standardBypass, standardBypassComments, availableToLine, numLats, notLinedYet, allMeasured, issueWithLaterals, notMeasuredYet, notDeliveredYet, newTrafficControl, newTrafficControlDetails, newStandardBypass, newStandardBypassComments, availableToLine);
}
}
}
}