static Automation()
{
// 파라미터 enum 쪼개기
var enumValues = System.Enum.GetValues(typeof(TargetParam));
var enumCount = enumValues.Length;
s_targetParamEnumList = new TargetParam[enumCount];
for (int i = 0; i < enumCount; i++)
{
s_targetParamEnumList[i] = (TargetParam)enumValues.GetValue(i);
}
// 기본값 설정
s_defaultValues = new Dictionary <TargetParam, float>();
s_defaultValues[TargetParam.Volume] = 1.0f;
s_defaultValues[TargetParam.LowCut] = 0.0f;
// * 검증 코드. TargetParam마다 모두 기본값이 있어야한다.
foreach (var key in s_targetParamEnumList)
{
if (!s_defaultValues.ContainsKey(key))
{
throw new System.InvalidProgramException("default value for TargetParam." + System.Enum.GetName(typeof(TargetParam), key) + "is not set.");
}
}
// 빌트인 오토메이션 만들기
var auto_fadein = new Automation();
auto_fadein.targetParam = TargetParam.Volume;
auto_fadein.AddPoint(0, 0);
auto_fadein.AddPoint(1, 1);
LinearFadeIn = auto_fadein;
var auto_fadeout = new Automation();
auto_fadeout.targetParam = TargetParam.Volume;
auto_fadeout.AddPoint(0, 1);
auto_fadeout.AddPoint(1, 0);
LinearFadeOut = auto_fadeout;
var auto_instmute = new Automation();
auto_instmute.targetParam = TargetParam.Volume;
auto_instmute.AddPoint(0, 0);
InstantMute = auto_instmute;
var auto_instunmute = new Automation();
auto_instunmute.targetParam = TargetParam.Volume;
auto_instunmute.AddPoint(0, 1);
InstantUnMute = auto_instunmute;
}
// Use this for initialization
void Start()
{
var intro_vol = new Automation();
intro_vol.targetParam = Automation.TargetParam.Volume;
intro_vol.AddPoint(0, 0);
intro_vol.AddPoint(0.5f, 1);
intro_vol.AddPoint(1.0f, 1);
Output(intro_vol);
var intro_lowcut = new Automation();
intro_lowcut.targetParam = Automation.TargetParam.LowCut;
intro_lowcut.AddPoint(0, 1);
intro_lowcut.AddPoint(0.5f, 1);
intro_lowcut.AddPoint(0.5f, 0);
intro_lowcut.AddPoint(1, 0);
Output(intro_lowcut);
}
public static TransitionScenario GenTestScenario()
{
var scen = new TransitionScenario();
var intro_vol = new Automation();
intro_vol.targetParam = Automation.TargetParam.Volume;
intro_vol.AddPoint(0, 0);
intro_vol.AddPoint(1, 1);
scen.AddIntroAutomation(intro_vol);
var outro_vol = new Automation();
outro_vol.targetParam = Automation.TargetParam.Volume;
outro_vol.AddPoint(1, 0);
outro_vol.AddPoint(0, 1);
scen.AddOutroAutomation(outro_vol);
return(scen);
}
static Automation[] TestAutomation()
{
var tenauto1 = new Automation();
tenauto1.targetParam = Automation.TargetParam.Volume;
tenauto1.AddPoint(0, 0);
tenauto1.AddPoint(0.75f, 1);
var tenauto2 = new Automation();
tenauto2.targetParam = Automation.TargetParam.Volume;
tenauto2.AddPoint(0, 0);
tenauto2.AddPoint(0.25f, 0);
tenauto2.AddPoint(0.5f, 1);
var tenauto3 = new Automation();
tenauto3.targetParam = Automation.TargetParam.Volume;
tenauto3.AddPoint(0, 0);
tenauto3.AddPoint(0.5f, 0);
tenauto3.AddPoint(1f, 1);
return(new Automation[] { tenauto1, tenauto2, tenauto3 });
}
public static TransitionScenario GenTestScenario2()
{
var scen = new TransitionScenario();
var intro_vol = new Automation();
intro_vol.targetParam = Automation.TargetParam.Volume;
intro_vol.AddPoint(0, 0);
intro_vol.AddPoint(0.5f, 1);
intro_vol.AddPoint(1.0f, 1);
scen.AddIntroAutomation(intro_vol);
var intro_lowcut = new Automation();
intro_lowcut.targetParam = Automation.TargetParam.LowCut;
intro_lowcut.AddPoint(0, 1);
intro_lowcut.AddPoint(0.5f, 1);
intro_lowcut.AddPoint(0.5f, 0);
intro_lowcut.AddPoint(1, 0);
scen.AddIntroAutomation(intro_lowcut);
var outro_vol = new Automation();
outro_vol.targetParam = Automation.TargetParam.Volume;
outro_vol.AddPoint(0, 1);
outro_vol.AddPoint(0.5f, 1);
outro_vol.AddPoint(1, 0);
scen.AddOutroAutomation(outro_vol);
var outro_lowcut = new Automation();
outro_lowcut.targetParam = Automation.TargetParam.LowCut;
outro_lowcut.AddPoint(0, 0);
outro_lowcut.AddPoint(0.5f, 0);
outro_lowcut.AddPoint(0.5f, 1);
outro_lowcut.AddPoint(1, 1);
scen.AddOutroAutomation(outro_lowcut);
return scen;
}
static Automation[] TestAutomation()
{
var tenauto1 = new Automation();
tenauto1.targetParam = Automation.TargetParam.Volume;
tenauto1.AddPoint(0, 0);
tenauto1.AddPoint(0.75f, 1);
var tenauto2 = new Automation();
tenauto2.targetParam = Automation.TargetParam.Volume;
tenauto2.AddPoint(0, 0);
tenauto2.AddPoint(0.25f, 0);
tenauto2.AddPoint(0.5f, 1);
var tenauto3 = new Automation();
tenauto3.targetParam = Automation.TargetParam.Volume;
tenauto3.AddPoint(0, 0);
tenauto3.AddPoint(0.5f, 0);
tenauto3.AddPoint(1f, 1);
return new Automation[] { tenauto1, tenauto2, tenauto3 };
}