public static Status UserDecrypt(int nKeyID, byte[] pData, int nDataLen, byte[] pDecryptedData)
{
if (!IsUse)
{
return(Status.ESAM_SUCC);
}
try
{
System.Threading.Thread.Sleep(200);
Status ret = Status.ESAM_SUCC;
ret = (Status)ESAM_UserDecrypt(nKeyID, pData, nDataLen, pDecryptedData);
//ret = (Status)ESAM_Decrypt(pData, nDataLen, pDecryptedData);
if (ret != Status.ESAM_SUCC)
{
AppLog.Write("[Esam][UserDecrypt]" + ret.ToString(), AppLog.LogMessageType.Warn);
}
return(ret);
}
catch (Exception err)
{
AppLog.Write("[Esam][UserDecrypt]Error!\n" + err.ToString(), AppLog.LogMessageType.Error);
return(Status.ESAM_FAIL);
}
}
/// <summary>
/// 读取此道信息
/// </summary>
/// <param name="track1"></param>
/// <param name="track2"></param>
/// <param name="track3"></param>
/// <returns></returns>
public static Status ReadCardTrack(ref string track1, ref string track2, ref string track3)
{
if (!IsUse)
{
return(Status.CARD_SUCC);
}
try
{
CardPos cardPos = CardPos.CardOnErrorPos;
BoxCardNum boxNum = BoxCardNum.Null;
Status ret = (Status)GetStatus(ref cardPos, ref boxNum);
if (ret == Status.CARD_SUCC && cardPos == CardPos.CardOnTrackReadPos)
{
byte[] bTrack1 = new byte[128];
byte[] bTrack2 = new byte[128];
byte[] bTrack3 = new byte[128];
ret = (Status)Card_ReadAll(bTrack1, bTrack2, bTrack3);
if (ret == Status.CARD_SUCC)
{
track1 = Encoding.Default.GetString(bTrack1).Trim();
track2 = Encoding.Default.GetString(bTrack2).Trim();
track3 = Encoding.Default.GetString(bTrack3).Trim();
}
}
else
{
ret = Status.CARD_FAIL;
}
return(ret);
}
catch (System.Exception e)
{
AppLog.Write("[CardIssuer][ReadCardTrack]Error!", AppLog.LogMessageType.Error, e);
return(Status.CARD_FAIL);
}
}
public bool ReadICCard(ref string bmpfileName)
{
bool bUsbPort = false;
//int intOpenPortRtn = 0;
int rtnTemp = 0;
int pucIIN = 0;
int pucSN = 0;
int puiCHMsgLen = 0;
int puiPHMsgLen = 0;
objEDZ = new clsEDZ();
EdziPortID = int.Parse(Identifier.Port.Substring(3));
////检测usb口的机具连接，必须先检测usb
//for (int iPort = 1001; iPort <= 1016; iPort++)
//{
// intOpenPortRtn = SDT_OpenPort(iPort);
// if (intOpenPortRtn == 144)
// {
// EdziPortID = iPort;
// bUsbPort = true;
// break;
// }
//}
////检测串口的机具连接
//if (!bUsbPort)
//{
// for (int iPort = 1; iPort <= 8; iPort++)
// {
// intOpenPortRtn = SDT_OpenPort(iPort);
// if (intOpenPortRtn == 144)
// {
// EdziPortID = iPort;
// bUsbPort = false;
// break;
// }
// }
//}
//if (intOpenPortRtn != 144)
//{
// throw new Exception("端口打开失败，请检测相应的端口或者重新连接读卡器！");
// return false;
//}
//在这里，如果您想下一次不用再耗费检查端口的检查的过程，您可以把 EdziPortID 保存下来，可以保存在注册表中，也可以保存在配置文件中，我就不多写了，但是，
//您要考虑机具连接端口被用户改变的情况哦
//下面找卡
rtnTemp = SDT_StartFindIDCard(EdziPortID, ref pucIIN, EdziIfOpen);
if (rtnTemp != 159)
{
rtnTemp = SDT_StartFindIDCard(EdziPortID, ref pucIIN, EdziIfOpen); //再找卡
if (rtnTemp != 159)
{
//AppLog.Write("未放卡或者卡未放好，请重新放卡!", AppLog.LogMessageType.Error);
//rtnTemp = SDT_ClosePort(EdziPortID);
//throw new Exception("未放卡或者卡未放好，请重新放卡！");
return(false);
}
}
//选卡
rtnTemp = SDT_SelectIDCard(EdziPortID, ref pucSN, EdziIfOpen);
if (rtnTemp != 144)
{
rtnTemp = SDT_SelectIDCard(EdziPortID, ref pucSN, EdziIfOpen); //再选卡
if (rtnTemp != 144)
{
AppLog.Write("读卡失败!", AppLog.LogMessageType.Error);
//rtnTemp = SDT_ClosePort(EdziPortID);
//throw new Exception("读卡失败！");
return(false);
}
}
//注意，在这里，用户必须有应用程序当前目录的读写权限
if (!Directory.Exists("IDCardInfo"))
{
Directory.CreateDirectory("IDCardInfo");
}
string FilePreName = DateTime.Now.ToString("MMddHHmmss");
string txtName = Path.Combine("IDCardInfo", FilePreName + ".txt");
string wltName = Path.Combine("IDCardInfo", FilePreName + ".wlt");
string bmpName = Path.Combine("IDCardInfo", FilePreName + ".bmp");
bmpfileName = "IDCardInfo/" + FilePreName + ".bmp";
//FileInfo objFile = new FileInfo("wz.txt");
//if (objFile.Exists)
//{
// objFile.Attributes = FileAttributes.Normal;
// objFile.Delete();
//}
//if (objFile.Exists)
//{
// AppLog.Write("Delete \"wz.txt\" Failed!", AppLog.LogMessageType.Warn);
// return false;
//}
//objFile = new FileInfo("zp.bmp");
//if (objFile.Exists)
//{
// objFile.Attributes = FileAttributes.Normal;
// objFile.Delete();
//}
//if (objFile.Exists)
//{
// AppLog.Write("Delete \"zp.bmp\" Failed!", AppLog.LogMessageType.Warn);
// return false;
//}
//objFile = new FileInfo("zp.wlt");
//if (objFile.Exists)
//{
// objFile.Attributes = FileAttributes.Normal;
// objFile.Delete();
//}
//if (objFile.Exists)
//{
// AppLog.Write("Delete \"zp.wlt\" Failed!", AppLog.LogMessageType.Warn);
// return false;
//}
rtnTemp = SDT_ReadBaseMsgToFile(EdziPortID, txtName, ref puiCHMsgLen, wltName, ref puiPHMsgLen, EdziIfOpen);
//rtnTemp = SDT_ReadBaseMsgToFile(EdziPortID, "wz.txt", ref puiCHMsgLen, "zp.wlt", ref puiPHMsgLen, EdziIfOpen);
//rtnTemp = SDT_ReadBaseMsg(EdziPortID, "wz.txt", ref puiCHMsgLen, "zp.wlt", ref puiPHMsgLen, EdziIfOpen);
if (rtnTemp != 144)
{
AppLog.Write("读卡失败!", AppLog.LogMessageType.Error);
//rtnTemp = SDT_ClosePort(EdziPortID);
//throw new Exception("读卡失败！");
return(false);
}
//下面解析照片，注意，如果在C盘根目录下没有机具厂商的授权文件Termb.Lic，照片解析将会失败
if (bUsbPort)
{
rtnTemp = GetBmp(wltName, 2);
}
//rtnTemp = GetBmp("zp.wlt", 2);
else
{
rtnTemp = GetBmp(wltName, 1);
}
//rtnTemp = GetBmp("zp.wlt", 1);
switch (rtnTemp)
{
case 0:
//MessageBox.Show("调用sdtapi.dll错误！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
AppLog.Write("调用sdtapi.dll错误!", AppLog.LogMessageType.Error);
return(false);
//throw new Exception("调用sdtapi.dll错误！");
//break;
case 1: //正常
break;
case -1:
//MessageBox.Show("相片解码错误！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
AppLog.Write("相片解码错误!", AppLog.LogMessageType.Error);
return(false);
//throw new Exception("相片解码错误！");
//break;
case -2:
//MessageBox.Show("wlt文件后缀错误！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
AppLog.Write("wlt文件后缀错误!", AppLog.LogMessageType.Error);
return(false);
//throw new Exception("wlt文件后缀错误！");
//break;
case -3:
//MessageBox.Show("wlt文件打开错误！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
AppLog.Write("wlt文件打开错误!", AppLog.LogMessageType.Error);
return(false);
//throw new Exception("wlt文件打开错误！");
//break;
case -4:
//MessageBox.Show("wlt文件格式错误！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
AppLog.Write("wlt文件格式错误!", AppLog.LogMessageType.Error);
return(false);
//throw new Exception("wlt文件格式错误！");
//break;
case -5:
//MessageBox.Show("软件未授权！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
AppLog.Write("软件未授权!", AppLog.LogMessageType.Error);
return(false);
//throw new Exception("软件未授权！");
//break;
case -6:
//MessageBox.Show("设备连接错误！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
AppLog.Write("设备连接错误!", AppLog.LogMessageType.Error);
return(false);
//throw new Exception("设备连接错误！");
//break;
}
//rtnTemp = SDT_ClosePort(EdziPortID);
FileInfo f = new FileInfo(txtName);
FileStream fs = f.OpenRead();
byte[] bt = new byte[fs.Length];
fs.Read(bt, 0, (int)fs.Length);
fs.Close();
string str = System.Text.UnicodeEncoding.Unicode.GetString(bt);
objEDZ.Name = System.Text.UnicodeEncoding.Unicode.GetString(bt, 0, 30).Trim();
objEDZ.Sex_Code = System.Text.UnicodeEncoding.Unicode.GetString(bt, 30, 2).Trim();
objEDZ.NATION_Code = System.Text.UnicodeEncoding.Unicode.GetString(bt, 32, 4).Trim();
string strBird = System.Text.UnicodeEncoding.Unicode.GetString(bt, 36, 16).Trim();
objEDZ.BIRTH = Convert.ToDateTime(strBird.Substring(0, 4) + "年" + strBird.Substring(4, 2) + "月" + strBird.Substring(6) + "日");
objEDZ.ADDRESS = System.Text.UnicodeEncoding.Unicode.GetString(bt, 52, 70).Trim();
objEDZ.IDC = System.Text.UnicodeEncoding.Unicode.GetString(bt, 122, 36).Trim();
objEDZ.REGORG = System.Text.UnicodeEncoding.Unicode.GetString(bt, 158, 30).Trim();
string strTem = System.Text.UnicodeEncoding.Unicode.GetString(bt, 188, bt.GetLength(0) - 188).Trim();
objEDZ.STARTDATE = Convert.ToDateTime(strTem.Substring(0, 4) + "年" + strTem.Substring(4, 2) + "月" + strTem.Substring(6, 2) + "日");
strTem = strTem.Substring(8);
if (strTem.Trim() != "长期")
{
objEDZ.ENDDATE = Convert.ToDateTime(strTem.Substring(0, 4) + "年" + strTem.Substring(4, 2) + "月" + strTem.Substring(6, 2) + "日");
}
else
{
objEDZ.ENDDATE = DateTime.MaxValue;
}
File.Delete(txtName);
if (File.Exists(txtName))
{
AppLog.Write("删除" + txtName + "文件失败!", AppLog.LogMessageType.Error);
}
//FileInfo objFile = new FileInfo(bmpName);
//if (!objFile.Exists)
//{
// AppLog.Write("照片解析失败，找不到照片文件!", AppLog.LogMessageType.Error);
// return false;
//}
//if (objFile.Exists)
//{
// FileStream fss = new FileStream("zp.bmp", FileMode.Open);
// byte[] imgbyte = new byte[(int)objFile.Length];
// fss.Read(imgbyte, 0, (int)objFile.Length);
// fss.Close();
// MemoryStream ms = new MemoryStream(imgbyte);
// Image img = Image.FromStream(ms);
// objEDZ.PIC_Image = (Image)img.Clone();
// objEDZ.PIC_Byte = imgbyte;
// img.Dispose();
// ms.Dispose();
//}
//ReadICCardComplete(objEDZ);
return(true);
}
/// <summary>
/// 无限循环等待接收纸币
/// </summary>
/// <param name="cType">允许接收纸币范围指令</param>
/// <param name="retValue">返回的结果</param>
/// <returns></returns>
public static Status CashPoll(ref PollRet retValue)
{
if (!IsUse)
{
return(Status.Success);
}
try
{
int iRet = EA_CASHCODE_Poll();
EA_CASHCODE_ACK();
switch (iRet)
{
case 1:
retValue = PollRet.One;
return(Status.Success);
case 2:
retValue = PollRet.Two;
return(Status.Success);
case 5:
retValue = PollRet.Five;
return(Status.Success);
case 10:
retValue = PollRet.Ten;
return(Status.Success);
case 20:
retValue = PollRet.Twenty;
return(Status.Success);
case 50:
retValue = PollRet.Fifty;
return(Status.Success);
case 100:
retValue = PollRet.Hundred;
return(Status.Success);
case 0:
retValue = PollRet.InspectionFail;
return(Status.Failed);
case -1:
retValue = PollRet.HappenError;
return(Status.Failed);
case -3:
retValue = PollRet.IgnoreRet;
return(Status.Failed);
default:
retValue = PollRet.InspectionFail;
return(Status.Failed);
}
}
catch (System.Exception e)
{
AppLog.Write("[CashReset][CashPoll]Error!\n" + e.ToString(), AppLog.LogMessageType.Error);
return(Status.Failed);
}
}
