示例#1
0
        private void writeKML(string filename)
        {
            try
            {
                writeGPX(filename);
            }
            catch { }

            Color[] colours = { Color.Red, Color.Orange, Color.Yellow, Color.Green, Color.Blue, Color.Indigo, Color.Violet, Color.Pink };

            AltitudeMode altmode = AltitudeMode.absolute;

            if (MainV2.cs.firmware == MainV2.Firmwares.ArduCopter2)
            {
                altmode = AltitudeMode.relativeToGround; // because of sonar, this is both right and wrong. right for sonar, wrong in terms of gps as the land slopes off.
            }

            KMLRoot kml = new KMLRoot();
            Folder fldr = new Folder("Log");

            Style style = new Style();
            style.Id = "yellowLineGreenPoly";
            style.Add(new LineStyle(HexStringToColor("7f00ffff"), 4));

            PolyStyle pstyle = new PolyStyle();
            pstyle.Color = HexStringToColor("7f00ff00");
            style.Add(pstyle);

            kml.Document.AddStyle(style);

            int stylecode = 0xff;
            int g = -1;
            foreach (List<Point3D> poslist in position)
            {
                g++;
                if (poslist == null)
                    continue;

                LineString ls = new LineString();
                ls.AltitudeMode = altmode;
                ls.Extrude = true;
                //ls.Tessellate = true;

                Coordinates coords = new Coordinates();
                coords.AddRange(poslist);

                ls.coordinates = coords;

                Placemark pm = new Placemark();

                string mode = "";
                if (g < modelist.Count)
                    mode = modelist[g];

                pm.name = g + " Flight Path " + mode;
                pm.styleUrl = "#yellowLineGreenPoly";
                pm.LineString = ls;

                stylecode = colours[g % (colours.Length - 1)].ToArgb();

                Style style2 = new Style();
                Color color = Color.FromArgb(0xff, (stylecode >> 16) & 0xff, (stylecode >> 8) & 0xff, (stylecode >> 0) & 0xff);
                log.Info("colour " + color.ToArgb().ToString("X") + " " + color.ToKnownColor().ToString());
                style2.Add(new LineStyle(color, 4));

                pm.AddStyle(style2);

                fldr.Add(pm);
            }

            Folder planes = new Folder();
            planes.name = "Planes";
            fldr.Add(planes);

            Folder waypoints = new Folder();
            waypoints.name = "Waypoints";
            fldr.Add(waypoints);

            LineString lswp = new LineString();
            lswp.AltitudeMode = AltitudeMode.relativeToGround;
            lswp.Extrude = true;

            Coordinates coordswp = new Coordinates();

            foreach (PointLatLngAlt p1 in cmd)
            {
                coordswp.Add(new Point3D(p1.Lng, p1.Lat, p1.Alt));
            }

            lswp.coordinates = coordswp;

            Placemark pmwp = new Placemark();

            pmwp.name = "Waypoints";
            //pm.styleUrl = "#yellowLineGreenPoly";
            pmwp.LineString = lswp;

            waypoints.Add(pmwp);

            int a = 0;
            int l = -1;

            Model lastmodel = null;

            foreach (Data mod in flightdata)
            {
                l++;
                if (mod.model.Location.latitude == 0)
                    continue;

                if (lastmodel != null)
                {
                    if (lastmodel.Location.Equals(mod.model.Location))
                    {
                        continue;
                    }
                }
                Placemark pmplane = new Placemark();
                pmplane.name = "Plane " + a;

                pmplane.visibility = false;

                Model model = mod.model;
                model.AltitudeMode = altmode;
                model.Scale.x = 2;
                model.Scale.y = 2;
                model.Scale.z = 2;

                try
                {
                    pmplane.description = @"<![CDATA[
              <table>
                <tr><td>Roll: " + model.Orientation.roll + @" </td></tr>
                <tr><td>Pitch: " + model.Orientation.tilt + @" </td></tr>
                <tr><td>Yaw: " + model.Orientation.heading + @" </td></tr>
                <tr><td>WP dist " + mod.ntun[2] + @" </td></tr>
                <tr><td>tar bear " + mod.ntun[3] + @" </td></tr>
                <tr><td>nav bear " + mod.ntun[4] + @" </td></tr>
                <tr><td>alt error " + mod.ntun[5] + @" </td></tr>
              </table>
            ]]>";
                }
                catch { }

                try
                {

                    pmplane.Point = new KmlPoint((float)model.Location.longitude, (float)model.Location.latitude, (float)model.Location.altitude);
                    pmplane.Point.AltitudeMode = altmode;

                    Link link = new Link();
                    link.href = "block_plane_0.dae";

                    model.Link = link;

                    pmplane.Model = model;

                    planes.Add(pmplane);
                }
                catch { } // bad lat long value

                lastmodel = mod.model;

                a++;
            }

            kml.Document.Add(fldr);

            kml.Save(filename);

            // create kmz - aka zip file

            FileStream fs = File.Open(filename.Replace(".log.kml", ".kmz"), FileMode.Create);
            ZipOutputStream zipStream = new ZipOutputStream(fs);
            zipStream.SetLevel(9); //0-9, 9 being the highest level of compression
            zipStream.UseZip64 = UseZip64.Off; // older zipfile

            // entry 1
            string entryName = ZipEntry.CleanName(Path.GetFileName(filename)); // Removes drive from name and fixes slash direction
            ZipEntry newEntry = new ZipEntry(entryName);
            newEntry.DateTime = DateTime.Now;

            zipStream.PutNextEntry(newEntry);

            // Zip the file in buffered chunks
            // the "using" will close the stream even if an exception occurs
            byte[] buffer = new byte[4096];
            using (FileStream streamReader = File.OpenRead(filename))
            {
                StreamUtils.Copy(streamReader, zipStream, buffer);
            }
            zipStream.CloseEntry();

            File.Delete(filename);

            filename = Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + "block_plane_0.dae";

            // entry 2
            entryName = ZipEntry.CleanName(Path.GetFileName(filename)); // Removes drive from name and fixes slash direction
            newEntry = new ZipEntry(entryName);
            newEntry.DateTime = DateTime.Now;

            zipStream.PutNextEntry(newEntry);

            // Zip the file in buffered chunks
            // the "using" will close the stream even if an exception occurs
            buffer = new byte[4096];
            using (FileStream streamReader = File.OpenRead(filename))
            {
                StreamUtils.Copy(streamReader, zipStream, buffer);
            }
            zipStream.CloseEntry();

            zipStream.IsStreamOwner = true;	// Makes the Close also Close the underlying stream
            zipStream.Close();

            positionindex = 0;
            modelist.Clear();
            flightdata.Clear();
            position = new List<Core.Geometry.Point3D>[200];
            cmd.Clear();
        }
示例#2
0
        public void writeKML(string filename)
        {
            try
            {
                writeGPX(filename);

                writeRinex(filename);
            }
            catch
            {
            }

            Color[] colours =
            {
                Color.Red, Color.Orange, Color.Yellow, Color.Green, Color.Blue, Color.Indigo,
                Color.Violet, Color.Pink
            };

            AltitudeMode altmode = AltitudeMode.absolute;

            KMLRoot kml = new KMLRoot();
            Folder fldr = new Folder("Log");

            Style style = new Style();
            style.Id = "yellowLineGreenPoly";
            style.Add(new LineStyle(HexStringToColor("7f00ffff"), 4));

            Style style1 = new Style();
            style1.Id = "spray";
            style1.Add(new LineStyle(HexStringToColor("4c0000ff"), 0));
            style1.Add(new PolyStyle() {Color = HexStringToColor("4c0000ff")});

            PolyStyle pstyle = new PolyStyle();
            pstyle.Color = HexStringToColor("7f00ff00");
            style.Add(pstyle);

            kml.Document.AddStyle(style);
            kml.Document.AddStyle(style1);

            int stylecode = 0xff;
            int g = -1;
            foreach (List<Point3D> poslist in position)
            {
                g++;
                if (poslist == null)
                    continue;

                /*
                List<PointLatLngAlt> pllalist = new List<PointLatLngAlt>();

                foreach (var point in poslist)
                {
                    pllalist.Add(new PointLatLngAlt(point.Y, point.X, point.Z, ""));
                }

                var ans = Utilities.LineOffset.GetPolygon(pllalist, 2);



                while (ans.Count > 0)
                {
                    var first = ans[0];
                    var second = ans[1];
                    var secondlast = ans[ans.Count - 2];
                    var last = ans[ans.Count-1];

                    ans.Remove(first);
                    ans.Remove(last);

                    var polycoords = new BoundaryIs();

                    polycoords.LinearRing = new LinearRing();

                    polycoords.LinearRing.Coordinates.Add(new Point3D(first.Lng, first.Lat, 1));
                    polycoords.LinearRing.Coordinates.Add(new Point3D(second.Lng, second.Lat, 1));
                    polycoords.LinearRing.Coordinates.Add(new Point3D(secondlast.Lng, secondlast.Lat, 1));
                    polycoords.LinearRing.Coordinates.Add(new Point3D(last.Lng, last.Lat, 1));
                    polycoords.LinearRing.Coordinates.Add(new Point3D(first.Lng, first.Lat, 1));

                    //if (!IsClockwise(polycoords.LinearRing.Coordinates))
                      //  polycoords.LinearRing.Coordinates.Reverse();

                    Polygon kmlpoly = new Polygon() { AltitudeMode = AltitudeMode.relativeToGround, Extrude = false, OuterBoundaryIs = polycoords };

                    Placemark pmpoly = new Placemark();
                    pmpoly.Polygon = kmlpoly;
                    pmpoly.name = g + " test";
                    pmpoly.styleUrl = "#spray";

                    fldr.Add(pmpoly);
                }
                */
                LineString ls = new LineString();
                ls.AltitudeMode = altmode;
                ls.Extrude = true;
                //ls.Tessellate = true;

                Coordinates coords = new Coordinates();
                coords.AddRange(poslist);

                ls.coordinates = coords;

                Placemark pm = new Placemark();

                string mode = "";
                if (g < modelist.Count)
                    mode = modelist[g];

                pm.name = g + " Flight Path " + mode;
                pm.styleUrl = "#yellowLineGreenPoly";
                pm.LineString = ls;

                stylecode = colours[g%(colours.Length - 1)].ToArgb();

                Style style2 = new Style();
                Color color = Color.FromArgb(0xff, (stylecode >> 16) & 0xff, (stylecode >> 8) & 0xff,
                    (stylecode >> 0) & 0xff);
                log.Info("colour " + color.ToArgb().ToString("X") + " " + color.ToKnownColor().ToString());
                style2.Add(new LineStyle(color, 4));


                pm.AddStyle(style2);

                fldr.Add(pm);
            }

            Placemark pmPOS = new Placemark();
            pmPOS.name = "POS Message";
            pmPOS.LineString = new LineString();
            pmPOS.LineString.coordinates = new Coordinates();
            Point3D lastPoint3D = new Point3D();
            PointLatLngAlt lastplla = PointLatLngAlt.Zero;
            foreach (var item in PosLatLngAlts)
            {
                var newpoint = new Point3D(item.Lng, item.Lat, item.Alt);

                if (item.GetDistance(lastplla) < 0.1 &&
                    lastPoint3D.Z >= (newpoint.Z - 0.3) &&
                    lastPoint3D.Z <= (newpoint.Z + 0.3))
                    continue;

                pmPOS.LineString.coordinates.Add(newpoint);
                lastPoint3D = newpoint;
                lastplla = item;
                if (pmPOS.LineString.coordinates.Count > 20000)
                {
                    //add current
                    pmPOS.AddStyle(style);
                    fldr.Add(pmPOS);

                    // create new
                    pmPOS = new Placemark();
                    pmPOS.name = "POS Message - extra";
                    pmPOS.LineString = new LineString();
                    pmPOS.LineString.coordinates = new Coordinates();
                    lastPoint3D = new Point3D();
                    lastplla = PointLatLngAlt.Zero;
                }
            }
            pmPOS.AddStyle(style);
            fldr.Add(pmPOS);

            Folder planes = new Folder();
            planes.name = "Planes";
            fldr.Add(planes);

            Folder waypoints = new Folder();
            waypoints.name = "Waypoints";
            fldr.Add(waypoints);


            LineString lswp = new LineString();
            lswp.AltitudeMode = AltitudeMode.relativeToGround;
            lswp.Extrude = true;

            Coordinates coordswp = new Coordinates();

            foreach (PointLatLngAlt p1 in cmd)
            {
                if (p1.Lng == 0 && p1.Lat == 0)
                    continue;

                coordswp.Add(new Point3D(p1.Lng, p1.Lat, p1.Alt));
            }

            lswp.coordinates = coordswp;

            Placemark pmwp = new Placemark();

            pmwp.name = "Waypoints";
            //pm.styleUrl = "#yellowLineGreenPoly";
            pmwp.LineString = lswp;

            if (coordswp.Count > 0)
                waypoints.Add(pmwp);

            int a = 0;
            int l = -1;

            Model lastmodel = null;

            foreach (Data mod in flightdata)
            {
                l++;
                if (mod.model.Location.latitude == 0)
                    continue;

                if (lastmodel != null)
                {
                    if (lastmodel.Location.Equals(mod.model.Location))
                    {
                        continue;
                    }
                }
                Placemark pmplane = new Placemark();
                pmplane.name = "Plane " + a;

                pmplane.visibility = false;

                Model model = mod.model;
                model.AltitudeMode = altmode;
                model.Scale.x = 2;
                model.Scale.y = 2;
                model.Scale.z = 2;

                try
                {
                    pmplane.description = @"<![CDATA[
              <table>
                <tr><td>Roll: " + model.Orientation.roll + @" </td></tr>
                <tr><td>Pitch: " + model.Orientation.tilt + @" </td></tr>
                <tr><td>Yaw: " + model.Orientation.heading + @" </td></tr>
                <tr><td>WP dist " + mod.ntun[2] + @" </td></tr>
				<tr><td>tar bear " + mod.ntun[3] + @" </td></tr>
				<tr><td>nav bear " + mod.ntun[4] + @" </td></tr>
				<tr><td>alt error " + mod.ntun[5] + @" </td></tr>
              </table>
            ]]>";
                }
                catch
                {
                }

                try
                {
                    pmplane.Point = new KmlPoint((float) model.Location.longitude, (float) model.Location.latitude,
                        (float) model.Location.altitude);
                    pmplane.Point.AltitudeMode = altmode;

                    Link link = new Link();
                    link.href = "block_plane_0.dae";

                    model.Link = link;

                    pmplane.Model = model;

                    planes.Add(pmplane);
                }
                catch
                {
                } // bad lat long value

                lastmodel = mod.model;

                a++;
            }

            kml.Document.Add(fldr);

            kml.Save(filename);

            // create kmz - aka zip file

            FileStream fs = File.Open(filename.ToLower().Replace(".log.kml", ".kmz").Replace(".bin.kml", ".kmz"),
                FileMode.Create);
            ZipOutputStream zipStream = new ZipOutputStream(fs);
            zipStream.SetLevel(9); //0-9, 9 being the highest level of compression
            zipStream.UseZip64 = UseZip64.Off; // older zipfile

            // entry 1
            string entryName = ZipEntry.CleanName(Path.GetFileName(filename));
                // Removes drive from name and fixes slash direction
            ZipEntry newEntry = new ZipEntry(entryName);
            newEntry.DateTime = DateTime.Now;

            zipStream.PutNextEntry(newEntry);

            // Zip the file in buffered chunks
            // the "using" will close the stream even if an exception occurs
            byte[] buffer = new byte[4096];
            using (FileStream streamReader = File.OpenRead(filename))
            {
                StreamUtils.Copy(streamReader, zipStream, buffer);
            }
            zipStream.CloseEntry();

            File.Delete(filename);

            filename = Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar +
                       "block_plane_0.dae";

            // entry 2
            entryName = ZipEntry.CleanName(Path.GetFileName(filename));
                // Removes drive from name and fixes slash direction
            newEntry = new ZipEntry(entryName);
            newEntry.DateTime = DateTime.Now;

            zipStream.PutNextEntry(newEntry);

            // Zip the file in buffered chunks
            // the "using" will close the stream even if an exception occurs
            buffer = new byte[4096];
            using (FileStream streamReader = File.OpenRead(filename))
            {
                StreamUtils.Copy(streamReader, zipStream, buffer);
            }
            zipStream.CloseEntry();


            zipStream.IsStreamOwner = true; // Makes the Close also Close the underlying stream
            zipStream.Close();

            positionindex = 0;
            modelist.Clear();
            flightdata.Clear();
            position = new List<Core.Geometry.Point3D>[200];
            cmd.Clear();
        }