private void AddConnectedMember(AttachedMember attachedMember, ConnectionPoint connectionPoint)
{
PolyLine3D polyLine3D = new PolyLine3D();
polyLine3D.Id = openModel.GetMaxId(polyLine3D) + 1;
openModel.AddObject(polyLine3D);
//endpoints
Point3D pA = openModel.Point3D.First(a => a.Id == attachedMember.ideaLine.Start.id);
Point3D pB = openModel.Point3D.First(a => a.Id == attachedMember.ideaLine.End.id);
//create line segment
LineSegment3D lineSegment = new LineSegment3D();
lineSegment.Id = openModel.GetMaxId(lineSegment) + 1;
lineSegment.StartPoint = new ReferenceElement(pA);
lineSegment.EndPoint = new ReferenceElement(pB);
openModel.AddObject(lineSegment);
polyLine3D.Segments.Add(new ReferenceElement(lineSegment));
///*
double xcor = attachedMember.ElementRAZ.line.vector.X;
double ycor = attachedMember.ElementRAZ.line.vector.Y;
double zcor = attachedMember.ElementRAZ.line.vector.Z;
//Define LCS (local-y in XY plane) and unitize
VectorRAZ vx = new VectorRAZ(xcor, ycor, zcor).Unitize();
VectorRAZ vy = new VectorRAZ();
VectorRAZ vz = new VectorRAZ();
if (xcor == 0.0 && ycor == 0.0)
{
vy = new VectorRAZ(0.0, 1.0, 0.0).Unitize();
vz = new VectorRAZ((-zcor), 0.0, (xcor)).Unitize();
}
else
{
vy = new VectorRAZ(-ycor, xcor, 0.0).Unitize();
vz = new VectorRAZ((-zcor * xcor), (-zcor * ycor), ((xcor * xcor) + (ycor * ycor))).Unitize();
}
var LocalCoordinateSystem = new CoordSystemByVector();
LocalCoordinateSystem.VecX = new Vector3D()
{
X = vx.X, Y = vx.Y, Z = vx.Z
};
LocalCoordinateSystem.VecY = new Vector3D()
{
X = vy.X, Y = vy.Y, Z = vy.Z
};
LocalCoordinateSystem.VecZ = new Vector3D()
{
X = vz.X, Y = vz.Y, Z = vz.Z
};
lineSegment.LocalCoordinateSystem = LocalCoordinateSystem;
//*/
//create element
Element1D element1D = new Element1D();
//element1D.Id = openModel.GetMaxId(element1D) + 1;
element1D.Id = attachedMember.ElementRAZ.id + 1; //Use of Id from Grasshopper Model + Plus One
element1D.Name = "Element " + element1D.Id.ToString();
element1D.Segment = new ReferenceElement(lineSegment);
IdeaRS.OpenModel.CrossSection.CrossSection crossSection = openModel.CrossSection.First(a => a.Id == attachedMember.ElementRAZ.crossSection.id);
element1D.CrossSectionBegin = new ReferenceElement(crossSection);
element1D.CrossSectionEnd = new ReferenceElement(crossSection);
if (attachedMember is ConnectingMember)
{
ConnectingMember connectingMember = attachedMember as ConnectingMember;
double eccentricty = new double();
if (connectingMember.localEccentricity == -0)
{
eccentricty = 0;
}
else
{
eccentricty = connectingMember.localEccentricity;
}
element1D.EccentricityBeginZ = eccentricty;
element1D.EccentricityEndZ = eccentricty;
}
openModel.AddObject(element1D);
//create member
Member1D member1D = new Member1D();
member1D.Id = openModel.GetMaxId(member1D) + 1;
member1D.Name = "Member " + member1D.Id.ToString();
member1D.Elements1D.Add(new ReferenceElement(element1D));
openModel.Member1D.Add(member1D);
//create connected member
ConnectedMember connectedMember = new ConnectedMember();
connectedMember.Id = member1D.Id;
connectedMember.MemberId = new ReferenceElement(member1D);
connectionPoint.ConnectedMembers.Add(connectedMember);
}
private void AddConnectedMember(AttachedMember attachedMember, ConnectionPoint connectionPoint)
{
PolyLine3D polyLine3D = new PolyLine3D();
polyLine3D.Id = openModel.GetMaxId(polyLine3D) + 1;
openModel.AddObject(polyLine3D);
//endpoints
Point3D pA = openModel.Point3D.First(a => a.Id == attachedMember.ideaLine.Start.id);
Point3D pB = openModel.Point3D.First(a => a.Id == attachedMember.ideaLine.End.id);
//create line segment
LineSegment3D lineSegment = new LineSegment3D();
lineSegment.Id = openModel.GetMaxId(lineSegment) + 1;
lineSegment.StartPoint = new ReferenceElement(pA);
lineSegment.EndPoint = new ReferenceElement(pB);
openModel.AddObject(lineSegment);
polyLine3D.Segments.Add(new ReferenceElement(lineSegment));
SetLCS(attachedMember, lineSegment);
//create element
Element1D element1D = new Element1D();
//element1D.Id = openModel.GetMaxId(element1D) + 1;
element1D.Id = attachedMember.ElementRAZ.id + 1; //Use of Id from Grasshopper Model + Plus One
element1D.Name = "Element " + element1D.Id.ToString();
element1D.Segment = new ReferenceElement(lineSegment);
IdeaRS.OpenModel.CrossSection.CrossSection crossSection = openModel.CrossSection.First(a => a.Id == attachedMember.ElementRAZ.crossSection.id);
element1D.CrossSectionBegin = new ReferenceElement(crossSection);
element1D.CrossSectionEnd = new ReferenceElement(crossSection);
//element1D.RotationRx = attachedMember.ElementRAZ.rotationLCS;
if (attachedMember is ConnectingMember)
{
ConnectingMember connectingMember = attachedMember as ConnectingMember;
double eccentricty = new double();
if (connectingMember.localEccentricity == -0)
{
eccentricty = 0;
}
else
{
eccentricty = connectingMember.localEccentricity;
}
element1D.EccentricityBeginZ = eccentricty;
element1D.EccentricityEndZ = eccentricty;
}
openModel.AddObject(element1D);
//create member
Member1D member1D = new Member1D();
member1D.Id = openModel.GetMaxId(member1D) + 1;
member1D.Name = "Member " + member1D.Id.ToString();
member1D.Elements1D.Add(new ReferenceElement(element1D));
openModel.Member1D.Add(member1D);
//create connected member
ConnectedMember connectedMember = new ConnectedMember();
connectedMember.Id = member1D.Id;
connectedMember.MemberId = new ReferenceElement(member1D);
connectionPoint.ConnectedMembers.Add(connectedMember);
}
private void AddConnectedMember(List <BearingMember> bearingMembers, ConnectionPoint connectionPoint)
{
PolyLine3D polyLine3D = new PolyLine3D();
polyLine3D.Id = openModel.GetMaxId(polyLine3D) + 1;
openModel.AddObject(polyLine3D);
Point3D pA = new Point3D();
Point3D pB = new Point3D();
Point3D pC = new Point3D();
Point3D pD = new Point3D();
//view from point [B], point [B] is centerpoint of connection
if (bearingMembers[0].isStartPoint == false)
{
if (bearingMembers[1].isStartPoint == true)
{
// [A]=0=>[B]=1=>[C]
pA = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.Start.id);
pB = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.End.id);
pC = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.Start.id);
pD = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.End.id);
}
else
{
// [A]=0=>[B]<=1=[C]
pA = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.Start.id);
pB = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.End.id);
pC = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.End.id);
pD = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.Start.id);
}
}
else
{
if (bearingMembers[1].isStartPoint == true)
{
// [A]<=0=[B]=1=>[C]
pA = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.End.id);
pB = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.Start.id);
pC = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.Start.id);
pD = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.End.id);
}
else
{
// [A]<=0=[B]<=1=[C]
pA = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.End.id);
pB = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.Start.id);
pC = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.End.id);
pD = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.Start.id);
/*
* pA = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.End.id);
* pB = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.Start.id);
* pC = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.End.id);
* pD = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.Start.id);
*/
}
}
//segments
/*
* Point3D pA = openModel.Point3D.First(a => a.Id == bearingMembers[0].ideaLine.Start.id);
* Point3D pB = openModel.Point3D.First(a => a.Id == bearingMembers[0].ideaLine.End.id);
* Point3D pC = openModel.Point3D.First(a => a.Id == bearingMembers[1].ideaLine.Start.id);
* Point3D pD = openModel.Point3D.First(a => a.Id == bearingMembers[1].ideaLine.End.id);
*/
List <Point3D> points = new List <Point3D>()
{
pA, pB, pC, pD
};
//Point3D pointB = points.Where(a => a.Id == connectionPoint.Id).First();
//Point3D pointA = points.Where(a => a.Id != connectionPoint.Id).ToList()[0];//logica
//Point3D pointC = points.Where(a => a.Id != connectionPoint.Id).ToList()[1];
//Note: not most robust solution, e.g. does not hold in case of segments with inverse vectors
Point3D pointA = pA; //Endpoint of first member
Point3D pointB = pB; //Startpoint of first member
Point3D pointC = pD; //Endpoint of second member
LineSegment3D lineSegment1 = new LineSegment3D();
lineSegment1.Id = openModel.GetMaxId(lineSegment1) + 1;
openModel.AddObject(lineSegment1);
lineSegment1.StartPoint = new ReferenceElement(pointA);
lineSegment1.EndPoint = new ReferenceElement(pointB);
polyLine3D.Segments.Add(new ReferenceElement(lineSegment1));
///*
//Defining LCS for First lineSegment
double xcor = bearingMembers[0].ElementRAZ.line.vector.X;
double ycor = bearingMembers[0].ElementRAZ.line.vector.Y;
double zcor = bearingMembers[0].ElementRAZ.line.vector.Z;
//Define LCS (local-y in XY plane) and unitize
VectorRAZ vx = new VectorRAZ(xcor, ycor, zcor).Unitize();
VectorRAZ vy = new VectorRAZ();
VectorRAZ vz = new VectorRAZ();
if (xcor == 0.0 && ycor == 0.0)
{
vy = new VectorRAZ(0.0, 1.0, 0.0).Unitize();
vz = new VectorRAZ((-zcor), 0.0, (xcor)).Unitize();
}
else
{
vy = new VectorRAZ(-ycor, xcor, 0.0).Unitize();
vz = new VectorRAZ((-zcor * xcor), (-zcor * ycor), ((xcor * xcor) + (ycor * ycor))).Unitize();
}
var LocalCoordinateSystem = new CoordSystemByVector();
LocalCoordinateSystem.VecX = new Vector3D()
{
X = vx.X, Y = vx.Y, Z = vx.Z
};
LocalCoordinateSystem.VecY = new Vector3D()
{
X = vy.X, Y = vy.Y, Z = vy.Z
};
LocalCoordinateSystem.VecZ = new Vector3D()
{
X = vz.X, Y = vz.Y, Z = vz.Z
};
lineSegment1.LocalCoordinateSystem = LocalCoordinateSystem;
//*/
LineSegment3D lineSegment2 = new LineSegment3D();
lineSegment2.Id = openModel.GetMaxId(lineSegment2) + 1;
openModel.AddObject(lineSegment2);
lineSegment2.StartPoint = new ReferenceElement(pointB);
lineSegment2.EndPoint = new ReferenceElement(pointC);
polyLine3D.Segments.Add(new ReferenceElement(lineSegment2));
///*
/////Defining LCS for Second lineSegment
double xcor2 = bearingMembers[1].ElementRAZ.line.vector.X;
double ycor2 = bearingMembers[1].ElementRAZ.line.vector.Y;
double zcor2 = bearingMembers[1].ElementRAZ.line.vector.Z;
//Define LCS (local-y in XY plane) and unitize
VectorRAZ vx2 = new VectorRAZ(xcor2, ycor2, zcor2).Unitize();
VectorRAZ vy2 = new VectorRAZ();
VectorRAZ vz2 = new VectorRAZ();
if (xcor2 == 0.0 && ycor2 == 0.0)
{
vy2 = new VectorRAZ(0.0, 1.0, 0.0).Unitize();
vz2 = new VectorRAZ((-zcor2), 0.0, (xcor2)).Unitize();
}
else
{
vy2 = new VectorRAZ(-ycor2, xcor2, 0.0).Unitize();
vz2 = new VectorRAZ((-zcor2 * xcor2), (-zcor2 * ycor2), ((xcor2 * xcor2) + (ycor2 * ycor2))).Unitize();
}
var LocalCoordinateSystem2 = new CoordSystemByVector();
LocalCoordinateSystem2.VecX = new Vector3D()
{
X = vx2.X, Y = vx2.Y, Z = vx2.Z
};
LocalCoordinateSystem2.VecY = new Vector3D()
{
X = vy2.X, Y = vy2.Y, Z = vy2.Z
};
LocalCoordinateSystem2.VecZ = new Vector3D()
{
X = vz2.X, Y = vz2.Y, Z = vz2.Z
};
lineSegment2.LocalCoordinateSystem = LocalCoordinateSystem2;
//*/
//create elements
Element1D el1 = new Element1D();
//el1.Id = openModel.GetMaxId(el1) + 1;
el1.Id = bearingMembers[0].ElementRAZ.id + 1; //Use of Id from Grasshopper Model + Plus One
el1.Name = "E" + el1.Id.ToString();
el1.Segment = new ReferenceElement(lineSegment1);
IdeaRS.OpenModel.CrossSection.CrossSection crossSection = openModel.CrossSection.First(a => a.Id == bearingMembers[0].ElementRAZ.crossSection.id);
el1.CrossSectionBegin = new ReferenceElement(crossSection);
el1.CrossSectionEnd = new ReferenceElement(crossSection);
openModel.AddObject(el1);
Element1D el2 = new Element1D();
//el2.Id = openModel.GetMaxId(el2) + 1;
el2.Id = bearingMembers[1].ElementRAZ.id + 1; //Use of Id from Grasshopper Model + Plus One
el2.Name = "E" + el2.Id.ToString();
el2.Segment = new ReferenceElement(lineSegment2);
el2.CrossSectionBegin = new ReferenceElement(crossSection);
el2.CrossSectionEnd = new ReferenceElement(crossSection);
openModel.AddObject(el2);
//create member
Member1D member1D = new Member1D();
member1D.Id = openModel.GetMaxId(member1D) + 1;
member1D.Name = "Member" + member1D.Id.ToString();
member1D.Elements1D.Add(new ReferenceElement(el1));
member1D.Elements1D.Add(new ReferenceElement(el2));
openModel.Member1D.Add(member1D);
//create connected member
ConnectedMember connectedMember = new ConnectedMember();
connectedMember.Id = member1D.Id;
connectedMember.MemberId = new ReferenceElement(member1D);
connectionPoint.ConnectedMembers.Add(connectedMember);
}
private void AddConnectedMember(List <BearingMember> bearingMembers, ConnectionPoint connectionPoint)
{
PolyLine3D polyLine3D = new PolyLine3D();
polyLine3D.Id = openModel.GetMaxId(polyLine3D) + 1;
openModel.AddObject(polyLine3D);
Point3D pA = new Point3D();
Point3D pB = new Point3D();
Point3D pB2 = new Point3D();
Point3D pC = new Point3D();
pA = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.Start.id);
pB = openModel.Point3D.First(a => a.Id == bearingMembers[0].ElementRAZ.line.End.id);
pB2 = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.Start.id);
pC = openModel.Point3D.First(a => a.Id == bearingMembers[1].ElementRAZ.line.End.id);
List <Point3D> points = new List <Point3D>()
{
pA, pB, pB2, pC
};
Point3D pointA = pA; //Endpoint of first member
Point3D pointB = pB; //Startpoint of first member
Point3D pointC = pC; //Endpoint of second member
LineSegment3D lineSegment1 = new LineSegment3D();
lineSegment1.Id = openModel.GetMaxId(lineSegment1) + 1;
openModel.AddObject(lineSegment1);
lineSegment1.StartPoint = new ReferenceElement(pointA);
lineSegment1.EndPoint = new ReferenceElement(pointB);
polyLine3D.Segments.Add(new ReferenceElement(lineSegment1));
SetLCS(bearingMembers[0], lineSegment1);
LineSegment3D lineSegment2 = new LineSegment3D();
lineSegment2.Id = openModel.GetMaxId(lineSegment2) + 1;
openModel.AddObject(lineSegment2);
lineSegment2.StartPoint = new ReferenceElement(pointB);
lineSegment2.EndPoint = new ReferenceElement(pointC);
polyLine3D.Segments.Add(new ReferenceElement(lineSegment2));
SetLCS(bearingMembers[1], lineSegment2);
//create elements
Element1D el1 = new Element1D();
//el1.Id = openModel.GetMaxId(el1) + 1;
el1.Id = bearingMembers[0].ElementRAZ.id + 1; //Use of Id from Grasshopper Model + Plus One
el1.Name = "E" + el1.Id.ToString();
el1.Segment = new ReferenceElement(lineSegment1);
IdeaRS.OpenModel.CrossSection.CrossSection crossSection = openModel.CrossSection.First(a => a.Id == bearingMembers[0].ElementRAZ.crossSection.id);
el1.CrossSectionBegin = new ReferenceElement(crossSection);
el1.CrossSectionEnd = new ReferenceElement(crossSection);
//el1.RotationRx = bearingMembers[0].ElementRAZ.rotationLCS;
openModel.AddObject(el1);
Element1D el2 = new Element1D();
//el2.Id = openModel.GetMaxId(el2) + 1;
el2.Id = bearingMembers[1].ElementRAZ.id + 1; //Use of Id from Grasshopper Model + Plus One
el2.Name = "E" + el2.Id.ToString();
el2.Segment = new ReferenceElement(lineSegment2);
el2.CrossSectionBegin = new ReferenceElement(crossSection);
el2.CrossSectionEnd = new ReferenceElement(crossSection);
//el2.RotationRx = bearingMembers[1].ElementRAZ.rotationLCS;
openModel.AddObject(el2);
//create member
Member1D member1D = new Member1D();
member1D.Id = openModel.GetMaxId(member1D) + 1;
member1D.Name = "Member" + member1D.Id.ToString();
member1D.Elements1D.Add(new ReferenceElement(el1));
member1D.Elements1D.Add(new ReferenceElement(el2));
openModel.Member1D.Add(member1D);
//create connected member
ConnectedMember connectedMember = new ConnectedMember();
connectedMember.Id = member1D.Id;
connectedMember.MemberId = new ReferenceElement(member1D);
connectionPoint.ConnectedMembers.Add(connectedMember);
}