private string ProcessUse(DataTable dataTable, ref int dataTableIndex, out List <HbXYZ> hbXyzList)
{
hbXyzList = new List <HbXYZ>();
if (dataTableIndex > dataTable.Rows.Count - 1)
{
return("Program error: dataTable index value exceeded range.");
}
DataRow dataRow = dataTable.Rows[dataTableIndex];
GetHbXyzRow getHbXyzRow = new GetHbXyzRow(dataRow);
int testNextIndex = dataTableIndex + 1;
if (testNextIndex > dataTable.Rows.Count - 1)
{
return("End of file encountered during Use Set.");
}
bool continueLoop = true;
while (continueLoop)
{
dataRow = dataTable.Rows[testNextIndex];
if (dataRow[2].ToString() == "Use")
{
getHbXyzRow.NextDataRow(dataRow);
testNextIndex++;
if (testNextIndex > dataTable.Rows.Count - 1)
{
return("End of file encountered during Use Set.");
}
}
else
{
continueLoop = false; // Next row is not a Use so break loop
}
}
dataTableIndex = testNextIndex - 1;
hbXyzList = getHbXyzRow.HbPoints;
return("");
}
private string GetNextInputItem(ref int dataTableIndex, out HbInputItem inputItem)
{
inputItem = new HbInputItem();
// Manage initial end of file conditions
// This is not an error; it indicates that the last item has been processed
if (dataTableIndex > dataTable.Rows.Count - 1)
{
return("EOF");
}
bool endOfFileCondition = false;
if (dataTableIndex == dataTable.Rows.Count - 1)
{
endOfFileCondition = true;
}
// Create the new InputItem to be returned at the end.
inputItem = new HbInputItem();
string returnValue = "";
// Get the initial data rows and set initial state
DataRow dataRowCurrent = this.dataTable.Rows[dataTableIndex];
DataRow dataRowNext = null;
if (!endOfFileCondition)
{
dataRowNext = this.dataTable.Rows[dataTableIndex + 1];
}
string arrayState = ""; // = "", "InCurveArray", "InReferenceArray" //"InUseSet",
// Primary loop
List <HbXYZ> currentHbXyzList = null; // Null values just for compiler; a new one of these three is created whenever it is used
HbCurveArrArray currentHbCurveArrayArray = null;
HbReferenceArrayArray currentHbReferenceArrayArray = null;
bool continueLoop = true;
while (continueLoop)
{
string commandActionCurrent = dataRowCurrent[2].ToString();
string commandObjectCurrent = dataRowCurrent[3].ToString();
string commandActionNext = null;
string commandObjectNext = null;
if (!endOfFileCondition)
{
commandActionNext = dataRowNext[2].ToString();
commandObjectNext = dataRowNext[3].ToString();
}
// Branch based on array state and current action
HbCurve hbCurve = null;
List <HbXYZ> listHbXyz = null;
GetHbEllipseValues getHbEllipseValues = null;
List <string> stringValues = null;
List <int> intValues = null;
List <double> doubleValues = null;
List <bool> boolValues = null;
switch (arrayState)
{
case "":
switch (commandActionCurrent)
{
//TODO Not really checking any of the input for valid data here. We should?
case "Add":
switch (commandObjectCurrent)
{
case "Level":
doubleValues = new List <double> {
Convert.ToDouble(dataRowCurrent[4].ToString(), this.provider)
}; // Level datum
stringValues = new List <string> {
dataRowCurrent[5].ToString()
}; // Level Name (optional)
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, null, stringValues, null, doubleValues, null);
break;
case "Grid":
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints;
if (listHbXyz.Count > 2)
{
hbCurve = new HbArc(listHbXyz[0], listHbXyz[1], listHbXyz[1]);
}
else
{
hbCurve = new HbLine(listHbXyz[0], listHbXyz[1]);
}
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "", hbCurve);
break;
case "DetailLine":
case "ModelLine":
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints;
hbCurve = new HbLine(listHbXyz[0], listHbXyz[1]);
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "Curve", hbCurve);
break;
case "DetailArc":
case "ModelArc":
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints;
hbCurve = new HbArc(listHbXyz[0], listHbXyz[1], listHbXyz[2]);
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "Curve", hbCurve);
break;
case "DetailEllipse":
case "ModelEllipse":
getHbEllipseValues = new GetHbEllipseValues(dataRowCurrent);
currentHbXyzList = new List <HbXYZ>();
currentHbXyzList.Add(getHbEllipseValues.PointFirst);
currentHbXyzList.Add(getHbEllipseValues.PointSecond);
hbCurve = new HbEllipse(getHbEllipseValues.PointFirst, getHbEllipseValues.PointSecond, getHbEllipseValues.RadiusY, getHbEllipseValues.Mode);
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "Curve", hbCurve);
break;
case "DetailNurbSpline":
case "ModelNurbSpline":
if (currentHbXyzList != null)
{
listHbXyz = currentHbXyzList;
}
else
{
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints;
}
hbCurve = new HbNurbSpline(listHbXyz);
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "Curve", hbCurve);
break;
case "AreaBoundaryLine":
case "RoomSeparationLine":
if (currentHbXyzList != null)
{
hbCurve = new HbNurbSpline(currentHbXyzList);
}
else
{
if (dataRowCurrent[7].ToString().ToLower() == "full" || dataRowCurrent[7].ToString().ToLower() == "half")
{
getHbEllipseValues = new GetHbEllipseValues(dataRowCurrent);
currentHbXyzList = new List <HbXYZ>();
currentHbXyzList.Add(getHbEllipseValues.PointFirst);
currentHbXyzList.Add(getHbEllipseValues.PointSecond);
hbCurve = new HbEllipse(getHbEllipseValues.PointFirst, getHbEllipseValues.PointSecond, getHbEllipseValues.RadiusY, getHbEllipseValues.Mode);
}
else
{
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints;
if (listHbXyz.Count == 2)
{
hbCurve = new HbLine(listHbXyz[0], listHbXyz[1]);
}
else
{
hbCurve = new HbArc(listHbXyz[0], listHbXyz[1], listHbXyz[2]);
}
}
}
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "Curve", hbCurve);
break;
case "TopographySurface":
case "AdaptiveComponent":
if (currentHbXyzList != null)
{
listHbXyz = currentHbXyzList;
}
else
{
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints;
}
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "", listHbXyz);
break;
case "Wall":
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints;
if (listHbXyz.Count < 2)
{
break;
}
if (listHbXyz.Count == 2)
{
hbCurve = new HbLine(listHbXyz[0], listHbXyz[1]);
}
else
{
hbCurve = new HbArc(listHbXyz[0], listHbXyz[1], listHbXyz[2]);
}
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "Curve", hbCurve);
break;
case "Floor":
if (currentHbXyzList != null)
{
listHbXyz = currentHbXyzList; // Note that use group input of points is not documented but is a good option
}
else
{
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints;
}
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "Points", listHbXyz);
break;
case "FamilyInstance":
case "Column":
case "Beam":
case "Area":
case "Room":
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints; // Only one for family instance, area, and room; two with column and beam.
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "", listHbXyz);
break;
case "ReferencePoint":
HbReferencePoint hbReferencePoint = new GetHbReferencePoint(dataRowCurrent).HbReferencePoint; // Only one point
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, null, hbReferencePoint, null, null);
break;
case "CurveByPoints":
HbReferenceArray hbReferenceArray = new HbReferenceArray();
//if (currentHbXyzList.Count != 0) listHbXyz = currentHbXyzList; // Note that use single line input of points is not documented but is a good option
if (currentHbXyzList != null)
{
listHbXyz = currentHbXyzList; // Note that use single line input of points is not documented but is a good option
}
else
{
listHbXyz = new GetHbXyzRow(dataRowCurrent).HbPoints;
}
foreach (HbXYZ hbXyz in listHbXyz)
{
hbReferenceArray.Add(new HbReferencePoint(hbXyz));
}
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, null, null, hbReferenceArray, null);
break;
//TODO Not handling this case for now. It is not allowed in the specification and not sure how it got inot the sample data
//case "FamilyExtrusion":
//// //csvWriter.AddFamilyExtrusion(curvesListList, "ExtrusionFamilyName", point11);
//// //csvWriter.AddFamilyExtrusion(curvesListList, "ExtrusionFamilyName");
//// //csvWriter.AddFamilyExtrusion(curvesListList, point11);
//// //csvWriter.AddFamilyExtrusion(curvesListList);
////if (commandObjectCurrent == "FamilyExtrusion") {
//// stringValues = new List<string> { dataRowCurrent[4].ToString() }; // Name
//// listHbXyz = new List<HbXYZ>();
//// listHbXyz.Add(new GetHbValue(dataRowCurrent[5].ToString()).AsHbXYZ()); // Insertion point optional (function will return null)
//// AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, null, listHbXyz, null, currentHbCurveArrayArray, null, null, null, stringValues, null, null, null);
//break;
default:
MessageBox.Show("Program error: Unknown 'CommandObject' in HummingbirdUtility.GetNextInputItem: " + commandObjectCurrent);
break;
}
currentHbXyzList = null; // reset for next use loop or other use
//inputItem.DataRowPrimary = dataRowCurrent;
continueLoop = false;
break;
case "Draw": // Implicit that action is CurveArray
currentHbCurveArrayArray = new HbCurveArrArray();
arrayState = "InCurveArrArray";
break;
case "Model":
arrayState = "InReferenceArrayArray";
break;
case "Use":
returnValue = ProcessUse(dataTable, ref dataTableIndex, out currentHbXyzList);
if (returnValue != "")
{
return(returnValue);
}
break;
case "Set":
switch (commandObjectCurrent)
{
case "WallType":
case "FloorType":
case "Level":
case "BeamJustification":
case "FilledRegionType":
stringValues = new List <string> {
dataRowCurrent[4].ToString()
};
break;
case "FamilyType":
case "BeamType":
case "AdaptiveComponentType":
case "MullionType":
stringValues = new List <string> {
dataRowCurrent[4].ToString(), dataRowCurrent[5].ToString()
};
break;
case "ColumnMode":
stringValues = new List <string> {
dataRowCurrent[4].ToString(), dataRowCurrent[5].ToString(), dataRowCurrent[6].ToString()
};
break;
case "WallHeight":
case "FamilyRotation":
case "ColumnHeight":
case "ColumnRotation":
case "BeamRotation":
case "FamilyExtrusionHeight":
doubleValues = new List <double> {
Convert.ToDouble(dataRowCurrent[4].ToString(), this.provider)
};
break;
case "FamilyMirrored":
case "FamilyFlipped":
boolValues = new List <bool> {
Convert.ToBoolean(dataRowCurrent[4].ToString()), Convert.ToBoolean(dataRowCurrent[5].ToString())
};
break;
default:
MessageBox.Show("Program error: Unknown 'CommandObject'.");
break;
}
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, null, stringValues, intValues, doubleValues, boolValues);
continueLoop = false;
//inputItem.DataRowPrimary = dataRowCurrent;
break;
case "Modify":
switch (commandObjectCurrent)
{
case "ParameterSet":
stringValues = new List <string> {
dataRowCurrent[4].ToString(), dataRowCurrent[5].ToString()
}; // Note that second item is kept as string until we actually set the parameter
break;
case "CurtainGridUAdd":
case "CurtainGridVAdd":
case "MullionUAdd":
case "MullionVAdd":
if (dataRowCurrent[5].ToString() == "" || dataRowCurrent[5].ToString() == null)
{
doubleValues = new List <double> {
Convert.ToDouble(dataRowCurrent[4].ToString(), this.provider)
}
}
;
else
{
doubleValues = new List <double> {
Convert.ToDouble(dataRowCurrent[4].ToString()), Convert.ToDouble(dataRowCurrent[5].ToString(), this.provider)
}
};
break;
default:
MessageBox.Show("Program error: Unknown 'CommandObject'.");
break;
}
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, null, stringValues, intValues, doubleValues, boolValues);
//inputItem.DataRowPrimary = dataRowCurrent;
continueLoop = false;
break;
default:
MessageBox.Show("Program error: Unknown 'actionValue'.");
break;
}
break;
case "InCurveArrArray":
switch (commandActionCurrent)
{
// Valid cases
case "Add":
if (commandObjectCurrent == "FamilyExtrusion")
{
stringValues = new List <string> {
dataRowCurrent[4].ToString()
}; // Name
HbXYZ insertionPoint = new GetHbValue(dataRowCurrent[5].ToString()).AsHbXYZ(); // Insertion point optional (function will return null)
if (insertionPoint == null)
{
listHbXyz = null;
}
else
{
listHbXyz = new List <HbXYZ>();
listHbXyz.Add(insertionPoint);
}
//listHbXyz = new List<HbXYZ>();
//listHbXyz.Add(new GetHbValue(dataRowCurrent[5].ToString()).AsHbXYZ()); // Insertion point optional (function will return null)
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, null, listHbXyz, null, currentHbCurveArrayArray, null, null, null, stringValues, null, null, null);
}
else // Floor, Wall, AreaBoundaryLine etc. with curvearray
{
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, "CurveArrArray", currentHbCurveArrayArray);
}
//inputItem.DataRowPrimary = dataRowCurrent;
continueLoop = false;
break;
case "Use":
case "Draw":
ProcessDraw(dataTable, ref dataTableIndex, out currentHbCurveArrayArray);
if (returnValue != "")
{
return(returnValue);
}
break;
// Error cases
case "Set":
case "Model":
case "Modify":
MessageBox.Show("Program error: '" + commandActionCurrent + "' value encountered during Curve Array.");
break;
default:
MessageBox.Show("Program error: Unknown 'actionValue'.");
break;
}
break;
case "InReferenceArrayArray":
switch (commandActionCurrent)
{
// Valid cases
case "Add":
AddCommand(inputItem, commandActionCurrent, commandObjectCurrent, null, null, null, currentHbReferenceArrayArray);
//inputItem.DataRowPrimary = dataRowCurrent;
continueLoop = false;
break;
case "Use":
returnValue = ProcessModel(dataTable, ref dataTableIndex, out currentHbReferenceArrayArray);
if (returnValue != "")
{
return(returnValue);
}
break;
//Error cases
case "Set":
case "Model": // Currently "Model will never occur; we are past the "Model - ReferenceArray" line at this point
case "Draw":
case "Modify":
MessageBox.Show("Program error: '" + commandActionCurrent + "' value encountered while in 'ReferenceArray' state.");
break;
default:
MessageBox.Show("Program error: Unknown 'actionValue'.");
break;
}
break;
default:
return("Unknown arrayState: " + arrayState);
}
// Always do these actions at the end
this.lastAction = commandActionCurrent;
this.lastObject = commandObjectCurrent;
// Increment index and get the next row if continuing loop.
dataTableIndex++;
if (continueLoop)
{
if (dataTableIndex > dataTable.Rows.Count - 1)
{
return("Program error: End of file encountered.");
}
dataRowCurrent = this.dataTable.Rows[dataTableIndex];
if (dataTableIndex == dataTable.Rows.Count - 1)
{
endOfFileCondition = true;
dataRowNext = null;
}
else
{
dataRowNext = this.dataTable.Rows[dataTableIndex + 1];
}
}
if (continueLoop == false) // About to exit the loop so capture the current row
{
inputItem.DataRowPrimary = dataRowCurrent;
}
} //end loop
// Set RowId based on last action
inputItem.RowId = dataRowCurrent[0].ToString();
// Set the ElementId based on the last Add
if (!(this.lastAction == "Set" || this.lastAction == "Modify"))
{
inputItem.ElementId = new GetHbValue(dataRowCurrent[1].ToString()).AsHbElementId();
}
return("");
}
private string ProcessDraw(DataTable dataTable, ref int dataTableIndex, out HbCurveArrArray hbCurveArrArray)
{
string returnValue = "";
hbCurveArrArray = new HbCurveArrArray();
HbCurveArray hbCurveArray = null;
if (dataTableIndex >= dataTable.Rows.Count - 1)
{
return("Program error: dataTable index value exceeded range.");
}
DataRow dataRow = dataTable.Rows[dataTableIndex];
string actionCurrent = dataRow[2].ToString();
int testNextIndex = dataTableIndex + 1;
if (testNextIndex > dataTable.Rows.Count - 1)
{
return("End of file encountered during Curve Array.");
}
bool continueLoop = true;
hbCurveArray = new HbCurveArray(); // Need to make new array at the start
List <HbXYZ> hbXyzList = null;
while (continueLoop)
{
dataRow = dataTable.Rows[dataTableIndex];
actionCurrent = dataRow[2].ToString();
string objectCurrent = dataRow[3].ToString();
switch (actionCurrent)
{
case "Use":
returnValue = ProcessUse(dataTable, ref dataTableIndex, out hbXyzList);
if (returnValue != "")
{
return(returnValue);
}
testNextIndex = dataTableIndex + 1;
if (testNextIndex > dataTable.Rows.Count - 1)
{
return("End of file encountered during Curve Array.");
}
break;
case "Draw":
// objectCurrent is not "CurveArray" first time since we are past that line when we entered the Draw state.
if (objectCurrent == "CurveArray") // Starting new loop
{
hbCurveArrArray.Add(hbCurveArray); // Capture the last array
hbCurveArray = new HbCurveArray(); // Start new array
}
else //Valid objectCurrent: "Line", "Arc", "NurbSpline", "Ellipse", "HermiteSpline"
{
if (hbXyzList == null)
{
hbXyzList = new GetHbXyzRow(dataRow).HbPoints;
}
HbCurve hbCurve;
returnValue = ProcessHbCurve(objectCurrent, dataRow, hbXyzList, out hbCurve);
if (returnValue != "")
{
return(returnValue);
}
hbCurveArray.HbCurves.Add(hbCurve);
hbXyzList = null; // So that the test above will work with the next item
}
break;
default:
return("Action '" + actionCurrent + "' encountered during Curve Array.");
}
testNextIndex = dataTableIndex + 1;
if (testNextIndex > dataTable.Rows.Count - 1)
{
return("End of file encountered during Curve Array.");
}
dataRow = dataTable.Rows[testNextIndex];
if (dataRow[2].ToString() == "Add")
{
continueLoop = false; // Next row will be the add statement so break loop
hbCurveArrArray.Add(hbCurveArray); // Capture the last one
}
else
{
dataTableIndex++;
}
} // Loop
return("");
}
