/// <summary>
/// Occurs when this tool is clicked
/// </summary>
public override void OnClick()
{
drawSpecialCom = new GIS.Common.DrawSpecialCommon();
nearestGeometry = new PolylineClass();
hightPoint = new PointClass();
hightPoint.PutCoords(0, 0);
string layerName = GIS.LayerNames.DEFALUT_DONGSHI;
m_pDongshiFeatureLayer = drawSpecialCom.GetFeatureLayerByName(layerName);
if (m_pDongshiFeatureLayer == null)
{
MessageBox.Show(@"当前地图上没有找到硐室图层", "提示", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
return;
}
}
/// <summary>
/// 根据钻孔绑定ID删除钻孔图元
/// </summary>
/// <params name="sBoreholeBidArray">要删除钻孔的绑定ID</params>
private static void DeleteZuanKongByBid(ICollection<string> sBoreholeBidArray)
{
if (sBoreholeBidArray.Count == 0) return;
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
const string sLayerAliasName = LayerNames.DEFALUT_BOREHOLE; //“钻孔”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show(@"未找到" + sLayerAliasName + @"图层,无法删除钻孔图元。");
return;
}
//2.删除钻孔图元
foreach (var sBoreholeBid in sBoreholeBidArray)
{
DataEditCommon.DeleteFeatureByBId(featureLayer, sBoreholeBid);
}
}
/// <summary>
/// 生成等值线
/// </summary>
/// <params name="targetworkspace"></params>
/// <params name="nameOftargetFeatureClass"></params>
/// <params name="sLayerAliasName"></params>
private bool CreateContours(IWorkspace targetworkspace, string nameOftargetFeatureClass,
string sLayerAliasName, string extent, ref string failInfo)
{
double douElevation;
//设置一个最小值
progressBarControl1.Properties.Minimum = 0;
//设置一个最大值
progressBarControl1.Properties.Maximum = 6;
//设置步长，即每次增加的数
progressBarControl1.Properties.Step = 1;
//设置进度条的样式
progressBarControl1.Properties.ProgressViewStyle = ProgressViewStyle.Solid;
progressBarControl1.Position = 0;
try
{
Geoprocessor GP = new Geoprocessor();
if (withIn(m_strDataFilePath) == false)
return false;
if (TB_Interval.Text == "")
{
MessageBox.Show("请输入正确的等高距！", "提示！");
return false;
}
if (double.TryParse(TB_Interval.Text.Trim(), out douElevation))
{ }
else
{
TB_Interval.Text = null;
MessageBox.Show("请输入正确的等高距！", "提示!");
return false;
}
string featurOut = m_MakeContoursFolder + "\\Cont.shp";
int k = 0;
while (File.Exists(featurOut))
{
k++;
featurOut = m_MakeContoursFolder + "\\Cont" + k.ToString() + ".shp";
}
int countCont = Directory.GetFiles(m_MakeContoursFolder, "Cont*").Length;
if (countCont > 0)
{
featurOut = m_MakeContoursFolder + "\\Cont" + countCont.ToString() + ".shp";
}
if (DrawContours.ConvertASCIIDescretePoint2FeatureClass(GP, m_strDataFilePath, featurOut) == false)
return false;
//执行步长
this.progressBarControl1.PerformStep();
string ContourRaster = m_MakeContoursFolder + "\\Spline";
//string ContourRaster = m_MakeContoursFolder + "\\" + nameOftargetFeatureClass + "_Render";
if (extent != "")//右上左下 xmax ymax xmin ymin
GP.SetEnvironmentValue("Extent", extent);
bool suc = false;
string sRasterLayerAliasName = sLayerAliasName + "渲染图";
ILayer rsLayer = DataEditCommon.GetLayerByName(DataEditCommon.g_pMap, sRasterLayerAliasName);
if (rsLayer != null)
{
DataEditCommon.g_pMap.DeleteLayer(rsLayer);
}
if (Directory.Exists(ContourRaster))
{
try
{
Directory.Delete(ContourRaster, true);
}
catch
{
k = 1;
while (Directory.Exists(ContourRaster))
{
ContourRaster = m_MakeContoursFolder + "\\Spline" + k.ToString();
k++;
}
}
}
switch (CB_InterpolationMethod.Text)
{
case "样条函数插值法":
suc = DrawContours.Interpolate2RasterSpline(GP, featurOut, ContourRaster, CB_SplineType.Text);
break;
case "自然邻域插值法":
suc = DrawContours.Interpolate2RasterNN(GP, featurOut, ContourRaster);
break;
case "克里格插值法":
suc = DrawContours.Interpolate2RasterKriging(GP, featurOut, ContourRaster,
CB_semiVariogramProp.Text, CB_searchRadiusProp.Text);
break;
case "反距离权重插值法":
suc = DrawContours.Interpolate2RasterIDW(GP, featurOut, ContourRaster);
break;
case "趋势面插值法":
suc = DrawContours.TrendToRaster(GP, featurOut, ContourRaster);
break;
}
if (suc == false)
return false;
this.progressBarControl1.PerformStep();
GP = new Geoprocessor();
string R2Contour = m_MakeContoursFolder + "\\Contour.shp";
k = 1;
while (File.Exists(R2Contour))
{
R2Contour = m_MakeContoursFolder + "\\Contour" + k.ToString() + ".shp";
k++;
}
int countContour = Directory.GetFiles(m_MakeContoursFolder, "Contour*").Length;
if (countContour > 0)
{
R2Contour = m_MakeContoursFolder + "\\Contour" + countContour.ToString() + ".shp";
}
if (DrawContours.SplineRasterToContour(GP, ContourRaster, R2Contour, douElevation) == false)
return false;
this.progressBarControl1.PerformStep();
string EvEContour = m_MakeContoursFolder + "\\EvEContour.shp";
k = 1;
while (File.Exists(EvEContour))
{
EvEContour = m_MakeContoursFolder + "\\EvEContour" + k.ToString() + ".shp";
k++;
}
int countEvEContour = Directory.GetFiles(m_MakeContoursFolder, "EvEContour*").Length;
if (countEvEContour > 0)
{
EvEContour = m_MakeContoursFolder + "\\EvEContour" + countEvEContour.ToString() + ".shp";
}
if (DrawContours.FeaturesTo3D(GP, R2Contour, EvEContour) == false)
return false;
this.progressBarControl1.PerformStep();
//获得等值线Shp文件所在的工作空间
IWorkspaceFactory workspaceFactory = new ShapefileWorkspaceFactory();
IWorkspace sourceworkspace = workspaceFactory.OpenFromFile(m_MakeContoursFolder, 0);
//裁切
IPolygon bianjie = GetPolygon();
//导入等值线Shp文件到数据库中
DrawSpecialCommon drawspecial = new DrawSpecialCommon();
string nameOfsourceFeatureClass = EvEContour.Substring(EvEContour.LastIndexOf("\\") + 1);
nameOfsourceFeatureClass = nameOfsourceFeatureClass.Substring(0, nameOfsourceFeatureClass.LastIndexOf("."));
bool Import = false;
List<ziduan> list = new List<ziduan>
{
new ziduan("BID", ""),
new ziduan("mingcheng", sLayerAliasName),
new ziduan("mcid", "0"),
new ziduan("date", DateTime.Now.ToString()),
new ziduan("type", CB_InterpolationMethod.Text)
};
list.Add(new ziduan("BID", ""));
list.Add(new ziduan("mingcheng", sLayerAliasName));
list.Add(new ziduan("mcid", "0"));
list.Add(new ziduan("date", DateTime.Now.ToString()));
list.Add(new ziduan("type", CB_InterpolationMethod.Text));
IFeatureLayer pFeatureLayer = DataEditCommon.GetLayerByName(DataEditCommon.g_pMap, EditLayerName) as IFeatureLayer;
string WhereClause = "mcid='" + "0" + "'";
DataEditCommon.DeleteFeatureByWhereClause(pFeatureLayer, WhereClause);
if (radioBtnKJ.Checked && bianjie != null)
Import = IntersectAll(DataEditCommon.GetFeatureClassByName(sourceworkspace, nameOfsourceFeatureClass), bianjie, list);
else
Import = drawspecial.ShapeImportGDB(sourceworkspace, targetworkspace, nameOfsourceFeatureClass, nameOftargetFeatureClass, list);
this.progressBarControl1.PerformStep();
if (Import == false)
{
MessageBox.Show(sLayerAliasName + "导入数据库失败！");
DataEditCommon.g_axTocControl.Update();
DataEditCommon.g_pAxMapControl.Refresh();
failInfo = sLayerAliasName;
return false;
}
//添加相应的渲染图
IRasterLayer newRasterLayer = new RasterLayerClass();
newRasterLayer.CreateFromFilePath(ContourRaster);
newRasterLayer = IntersectRaster(newRasterLayer, bianjie);
//newRasterLayer.CreateFromDataset(newRasterDs);
newRasterLayer.Name = sRasterLayerAliasName;
UsingRasterStretchColorRampRender(newRasterLayer);
//groupLayer.Add(newRasterLayer as ILayer);
int indexPosition = DataEditCommon.g_pAxMapControl.LayerCount;//GroupLayer序号
//判断MapControl中是否存在该图层
ILayer mLayer = DataEditCommon.GetLayerByName(DataEditCommon.g_pMap, sRasterLayerAliasName);
if (mLayer != null)
{
DataEditCommon.g_pMyMapCtrl.Map.DeleteLayer(mLayer);
indexPosition--;
}
DataEditCommon.g_pAxMapControl.AddLayer(newRasterLayer as ILayer, indexPosition);//添加到最下面
DataEditCommon.g_pAxMapControl.ActiveView.Extent = newRasterLayer.AreaOfInterest;
DataEditCommon.g_axTocControl.Update();
DataEditCommon.g_pAxMapControl.Refresh();
this.progressBarControl1.PerformStep();
return true;
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
return false;
}
}
private void BT_Ok_Click(object sender, EventArgs e)
{
try
{
if (!Directory.Exists(m_MakeContoursFolder))
{
Directory.CreateDirectory(m_MakeContoursFolder);
}
panel1.Enabled = false;
panel2.Enabled = false;
panel4.Enabled = false;
lbshengc.Visible = true;
Application.DoEvents();
ArrayList TheValueList = new ArrayList();
if (radioBtndata.Checked)
{
if (m_layerAliasName.Equals("瓦斯压力等值线"))
{
var gasPressures = GasPressure.FindAll();
foreach (var i in gasPressures)
{
XYValueStruct temp;
temp.X = i.coordinate_x;
temp.Y = i.coordinate_y;
temp.TheValue = i.gas_pressure_value;
TheValueList.Add(temp);
}
}
if (m_layerAliasName.Equals("瓦斯含量等值线"))
{
var gasContent = GasContent.FindAll();
foreach (var i in gasContent)
{
XYValueStruct temp;
temp.X = i.coordinate_x;
temp.Y = i.coordinate_y;
temp.TheValue = i.gas_content_value;
TheValueList.Add(temp);
}
}
if (m_layerAliasName.Equals("瓦斯涌出量等值线"))
{
var gasGushQuantity = GasGushQuantity.FindAll();
foreach (var i in gasGushQuantity)
{
XYValueStruct temp;
temp.X = i.coordinate_x;
temp.Y = i.coordinate_y;
temp.TheValue = i.absolute_gas_gush_quantity;
TheValueList.Add(temp);
}
}
if (TheValueList.Count < 3)
{
MessageBox.Show("离散点数据为空或小于三个，无法生成等值线！");
return;
}
string[] strlsd = new string[TheValueList.Count];
for (int i = 0; i < TheValueList.Count; i++)
{
XYValueStruct tempxy = (XYValueStruct)TheValueList[i];
string temstr = tempxy.X + "," + tempxy.Y + "," + tempxy.TheValue;
strlsd[i] = temstr;
}
m_strDataFilePath = Application.StartupPath + "\\tempdata.txt";
File.WriteAllLines(m_strDataFilePath, strlsd);
}
else
{
m_strDataFilePath = TB_DocumentPath.Text.Trim();
if (m_strDataFilePath.Equals(""))
{
MessageBox.Show("请选择一个离散点文件！");
return;
}
}
bool bIsSuccess = false;
string failInfo = "";
DrawSpecialCommon drawspecial = new DrawSpecialCommon();
string sLayerAliasName = m_layerAliasName;//MapControl中图层名称
string nameOftargetFeatureClass = SDELayerName;//m_layerName + "_NO" + sCoalseamNO;//数据库中图层名称
string extent = "";
if (radioBtnKJ.Checked)
{
ILayer pLayer = DataEditCommon.GetLayerByName(DataEditCommon.g_pMap, LayerNames.LAYER_ALIAS_MINE_BOUNDARY);
IFeatureLayer pFeatureLayer = (IFeatureLayer)pLayer;
IEnvelope pEnvelope = pFeatureLayer.AreaOfInterest;
//右上左下 xmax ymax xmin ymin
extent = pEnvelope.XMax.ToString() + " " + pEnvelope.YMax.ToString() + " " + pEnvelope.XMin.ToString() + " " + pEnvelope.YMin.ToString();
}
IWorkspace targetworkspace = DataEditCommon.g_pCurrentWorkSpace;
//最后重新生成图层并添加到数据库及MapControl中
bIsSuccess = CreateContours(targetworkspace, nameOftargetFeatureClass, sLayerAliasName, extent, ref failInfo);
if (bIsSuccess)
{
string layername = "";
if (m_layerAliasName.Equals("瓦斯压力等值线"))
{
layername = LayerNames.LAYER_ALIAS_MR_YLDZX;
}
if (m_layerAliasName.Equals("瓦斯含量等值线"))
{
layername = LayerNames.LAYER_ALIAS_MR_HLDZX;
}
if (m_layerAliasName.Equals("瓦斯涌出量等值线"))
{
layername = LayerNames.LAYER_ALIAS_MR_YCLDZX;
}
if (m_layerAliasName.Equals("地面标高等值线"))
{
layername = LayerNames.GROUND_LEVLE_CONTOUR;
}
if (m_layerAliasName.Equals("煤层底板等值线"))
{
layername = LayerNames.FLOOR_ELEVATION_CONTOUR;
}
if (m_layerAliasName.Equals("埋深等值线"))
{
layername = LayerNames.EMBEDDED_DEPTH_CONTOUR;
}
DataEditCommon.SetLayerVisibleByName(DataEditCommon.g_pMap, layername, true);
MessageBox.Show("等值线和渲染图生成完成。");
this.Close();
}
else
{
MessageBox.Show(failInfo + "生成过程有误，请检查。");
}
//this.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
finally
{
panel1.Enabled = true;
panel2.Enabled = true;
panel4.Enabled = true;
lbshengc.Visible = false;
Application.DoEvents();
progressBarControl1.Position = 0;
}
}
/// <summary>
/// 提 交
/// </summary>
/// <params name="sender"></params>
/// <params name="e"></params>
private void btnSubmit_Click(object sender, EventArgs e)
{
var borehole = Borehole.FindAllByProperty("name", txtBoreholeNumber.Text).FirstOrDefault() ??
new Borehole { bid = IdGenerator.NewBindingId() };
borehole.name = txtBoreholeNumber.Text.Trim();
borehole.ground_elevation = Convert.ToDouble(txtGroundElevation.Text.Trim());
borehole.coordinate_x = Convert.ToDouble(txtCoordinateX.Text.Trim());
borehole.coordinate_y = Convert.ToDouble(txtCoordinateY.Text.Trim());
borehole.coordinate_z = Convert.ToDouble(txtCoordinateZ.Text.Trim());
borehole.coal_seam_texture = string.Empty;
borehole.Save();
var subBorehole = new SubBorehole();
for (var i = 0; i < gvCoalSeamsTexture.RowCount; i++)
{
// 最后一行为空行时，跳出循环
if (i == gvCoalSeamsTexture.RowCount - 1)
{
break;
}
// 创建钻孔岩性实体
subBorehole = new SubBorehole
{
floor_elevation = Convert.ToDouble(gvCoalSeamsTexture.Rows[i].Cells[1].Value),
thickness = Convert.ToDouble(gvCoalSeamsTexture.Rows[i].Cells[2].Value),
coal_seam = gvCoalSeamsTexture.Rows[i].Cells[3].Value.ToString(),
coordinate_x = Convert.ToDouble(gvCoalSeamsTexture.Rows[i].Cells[4].Value),
coordinate_y = Convert.ToDouble(gvCoalSeamsTexture.Rows[i].Cells[5].Value),
coordinate_z = Convert.ToDouble(gvCoalSeamsTexture.Rows[i].Cells[6].Value),
lithology = gvCoalSeamsTexture.Rows[i].Cells[0].Value.ToString(),
borehole = borehole
};
subBorehole.Save();
}
var drawspecial = new DrawSpecialCommon();
const string sLayerAliasName = LayerNames.DEFALUT_BOREHOLE; //“钻孔”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show(@"未找到" + sLayerAliasName + @"图层,无法删钻孔图元。");
return;
}
if (borehole.id != 0)
{
DataEditCommon.DeleteFeatureByBId(featureLayer, borehole.bid);
}
var dlgResult = MessageBox.Show(@"是：见煤钻孔，否：未见煤钻孔，取消：不绘制钻孔",
@"绘制钻孔", MessageBoxButtons.YesNoCancel);
borehole = Borehole.FindAllByProperty("name", borehole.name).First();
switch (dlgResult)
{
case DialogResult.Yes:
DrawZuanKong(borehole, subBorehole);
break;
case DialogResult.No:
DrawZuanKong(borehole);
break;
case DialogResult.Cancel:
break;
}
DialogResult = DialogResult.OK;
}
/// <summary>
/// 根据勘探线层绑定ID删除勘探线层图元
/// </summary>
/// <params name="sfpFaultageBidArray">要删除勘探线层的绑定ID</params>
private void DeleteJLDCByBID(string[] sfpFaultageBidArray)
{
if (sfpFaultageBidArray.Length == 0) return;
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
const string sLayerAliasName = LayerNames.DEFALUT_KANTANXIAN; //“勘探线层”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show(@"未找到" + sLayerAliasName + @"图层,无法删除揭露断层图元。");
return;
}
//2.删除勘探线层图元
foreach (var sfpFaultageBid in sfpFaultageBidArray)
{
DataEditCommon.DeleteFeatureByBId(featureLayer, sfpFaultageBid);
}
}
/// <summary>
/// 根据揭露断层绑定ID删除揭露断层图元
/// </summary>
/// <params name="sfpFaultageBidArray">要删除揭露断层的绑定ID</params>
private void DeleteJLDCByBID(ICollection<string> sfpFaultageBidArray)
{
if (sfpFaultageBidArray.Count == 0) return;
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
const string sLayerAliasName = LayerNames.DEFALUT_EXPOSE_FAULTAGE; //“揭露断层”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show(@"未找到" + sLayerAliasName + @"图层,无法删除揭露断层图元。");
return;
}
//2.删除揭露断层图元
foreach (var sfpFaultageBid in sfpFaultageBidArray)
{
DataEditCommon.DeleteFeatureByBId(featureLayer, sfpFaultageBid);
}
}
/// <summary>
/// Occurs when this tool is clicked
/// </summary>
public override void OnClick()
{
drawSpecialCom = new GIS.Common.DrawSpecialCommon();
nearestGeometry = new PolylineClass();
hightPoint = new PointClass();
hightPoint.PutCoords(0, 0);
string layerName = GIS.LayerNames.DEFALUT_DONGSHI;
m_pDongshiFeatureLayer = drawSpecialCom.GetFeatureLayerByName(layerName);
if (m_pDongshiFeatureLayer == null)
{
MessageBox.Show(@"��ǰ��ͼ��û���ҵ�����ͼ��", "��ʾ", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
return;
}
}
/// <summary>
/// 修改井筒
/// </summary>
/// <params name="pitshaftEntity"></params>
private void ModifyJingTong(Pitshaft pitshaftEntity)
{
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
var sLayerAliasName = LayerNames.DEFALUT_JINGTONG; //“井筒”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show("未找到" + sLayerAliasName + "图层,无法修改井筒图元。");
return;
}
//2.删除原来图元，重新绘制新图元
var bIsDeleteOldFeature = DataEditCommon.DeleteFeatureByWhereClause(featureLayer,
"BID='" + pitshaftEntity.bid + "'");
//if (bIsDeleteOldFeature)
{
//绘制井筒
DrawJingTong(pitshaftEntity);
}
}
/// <summary>
/// 修改揭露断层图元
/// </summary>
/// <params name="faultageEntity"></params>
private void ModifyJldc(Faultage faultageEntity)
{
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
const string sLayerAliasName = LayerNames.DEFALUT_EXPOSE_FAULTAGE; //“揭露断层”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show(@"未找到" + sLayerAliasName + @"图层,无法修改揭露断层图元。");
return;
}
//2.删除原来图元，重新绘制新图元
DataEditCommon.DeleteFeatureByBId(featureLayer, faultageEntity.bid);
DrawJldc(faultageEntity);
}
/// <summary>
/// 修改勘探线图元
/// </summary>
/// <params name="prospectingLineEntity"></params>
/// <params name="lstProspectingBoreholePts"></params>
private void ModifyProspectingLine(ProspectingLine prospectingLineEntity, List<IPoint> lstProspectingBoreholePts)
{
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
var sLayerAliasName = LayerNames.DEFALUT_KANTANXIAN; //“勘探线”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show("未找到" + sLayerAliasName + "图层,无法修改勘探线图元。");
return;
}
//2.删除原来图元，重新绘制新图元
var bIsDeleteOldFeature = DataEditCommon.DeleteFeatureByBId(featureLayer, prospectingLineEntity.binding_id);
if (bIsDeleteOldFeature)
{
//绘制图元
DrawProspectingLine(prospectingLineEntity, lstProspectingBoreholePts);
}
}
/// <summary>
/// 根据所选钻孔点绘制勘探线
/// </summary>
/// <params name="prospectingLineEntity"></params>
/// <params name="lstProspectingBoreholePts"></params>
private void DrawProspectingLine(ProspectingLine prospectingLineEntity, List<IPoint> lstProspectingBoreholePts)
{
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
var sLayerAliasName = LayerNames.DEFALUT_KANTANXIAN; //“勘探线”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show("未找到" + sLayerAliasName + "图层,无法绘制勘探线图元。");
return;
}
//2.绘制图元
if (lstProspectingBoreholePts.Count == 0) return;
var prospectingLineID = prospectingLineEntity.binding_id;
//绘制推断断层
PointsFit2Polyline.CreateLine(featureLayer, lstProspectingBoreholePts, prospectingLineID);
}
/// <summary>
/// 根据井筒绑定ID删除井筒图元
/// </summary>
/// <params name="sPitshaftBIDArray">要删除井筒的绑定ID</params>
private void DeleteJintTongByBID(string[] sPitshaftBIDArray)
{
if (sPitshaftBIDArray.Length == 0) return;
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
var sLayerAliasName = LayerNames.DEFALUT_JINGTONG; //“井筒”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show("未找到" + sLayerAliasName + "图层,无法删除井筒图元。");
return;
}
//2.删除井筒图元
var sPitshaftBID = "";
for (var i = 0; i < sPitshaftBIDArray.Length; i++)
{
sPitshaftBID = sPitshaftBIDArray[i];
DataEditCommon.DeleteFeatureByBId(featureLayer, sPitshaftBID);
}
}
/// <summary>
/// 删除陷落柱图元
/// </summary>
/// <params name="sCollapseId"></params>
private void DeleteyXLZ(string sCollapseId)
{
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
const string sLayerAliasName = LayerNames.LAYER_ALIAS_MR_XianLuoZhu1; //“陷落柱_1”图层
var featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show(@"未找到" + sLayerAliasName + @"图层,无法删除陷落柱图元。");
return;
}
//2.删除原来图元，重新绘制新图元
DataEditCommon.DeleteFeatureByBId(featureLayer, sCollapseId);
}
/// <summary>
/// 修改陷落柱图元
/// </summary>
/// <params name="lstCollapsePillarsEntKeyPts"></params>
/// <params name="sCollapseId"></params>
private void ModifyXlz(List<CollapsePillarPoint> lstCollapsePillarsEntKeyPts, string sCollapseId)
{
//1.获得当前编辑图层
var drawspecial = new DrawSpecialCommon();
const string sLayerAliasName = LayerNames.DEFALUT_COLLAPSE_PILLAR_1; //“陷落柱_1”图层
IFeatureLayer featureLayer = drawspecial.GetFeatureLayerByName(sLayerAliasName);
if (featureLayer == null)
{
MessageBox.Show(@"未找到" + sLayerAliasName + @"图层,无法修改陷落柱图元。");
return;
}
//2.删除原来图元，重新绘制新图元
bool bIsDeleteOldFeature = DataEditCommon.DeleteFeatureByBId(featureLayer, sCollapseId);
if (bIsDeleteOldFeature)
{
//绘制图元
DrawXlz(lstCollapsePillarsEntKeyPts, sCollapseId);
}
}