public Output Solve(Input input)
{
//Fixed values
int ok = 1;
double rmsResid = 1.0;
double error = 1.0;
int axialStrainWarning = 0;
int axialSign = 1;
int writeMatrix = 0;
string title = input.Title;
IReadOnlyList <Node> nodes = input.Nodes;
IReadOnlyList <FrameElement> frameElements = input.FrameElements;
int nN = input.Nodes.Count;
List <float> rj = input.Nodes.Select(n => n.Radius).ToList();
List <Vec3Float> xyz = input.Nodes.Select(n => n.Position).ToList();
int DoF = 6 * nN;
int nR = input.ReactionInputs.Count;
double[] q = new double[DoF];
float[] r = new float[DoF];
for (int i = 0; i < nR; i++)
{
int j = input.ReactionInputs[i].Number; //This index number is decreased by 1 when importing
r[j * 6 + 0] = input.ReactionInputs[i].Position.X;
r[j * 6 + 1] = input.ReactionInputs[i].Position.Y;
r[j * 6 + 2] = input.ReactionInputs[i].Position.Z;
r[j * 6 + 3] = input.ReactionInputs[i].R.X;
r[j * 6 + 4] = input.ReactionInputs[i].R.Y;
r[j * 6 + 5] = input.ReactionInputs[i].R.Z;
}
for (int i = 0; i < DoF; i++)
{
q[i] = (r[i] == (double)1) ? 0 : 1;
}
int nE = input.FrameElements.Count;
List <double> L = input.FrameElements.Select(f =>
Coordtrans.CalculateSQDistance(input.Nodes[f.NodeIdx1].Position, input.Nodes[f.NodeIdx2].Position))
.ToList();
List <double> Le = new List <double>();
for (int i = 0; i < L.Count; i++)
{
Le.Add(L[i] - input.Nodes[input.FrameElements[i].NodeIdx1].Radius -
input.Nodes[input.FrameElements[i].NodeIdx2].Radius);
}
List <int> N1 = input.FrameElements.Select(f => f.NodeIdx1).ToList();
List <int> N2 = input.FrameElements.Select(f => f.NodeIdx2).ToList();
List <float> Ax = input.FrameElements.Select(f => f.Ax).ToList();
List <float> Asy = input.FrameElements.Select(f => f.Asy).ToList();
List <float> Asz = input.FrameElements.Select(f => f.Asz).ToList();
List <float> Jx = input.FrameElements.Select(f => f.Jx).ToList();
List <float> Iy = input.FrameElements.Select(f => f.Iy).ToList();
List <float> Iz = input.FrameElements.Select(f => f.Iz).ToList();
List <float> E = input.FrameElements.Select(f => f.E).ToList();
List <float> G = input.FrameElements.Select(f => f.G).ToList();
List <float> p = input.FrameElements.Select(f => f.Roll).ToList();
List <float> d = input.FrameElements.Select(f => f.Density).ToList();
int nL = input.LoadCases.Count;
List <float> gX = input.LoadCases.Select(l => l.Gravity.X).ToList();
List <float> gY = input.LoadCases.Select(l => l.Gravity.Y).ToList();
List <float> gZ = input.LoadCases.Select(l => l.Gravity.Z).ToList();
List <int> nF = input.LoadCases.Select(l => l.NodeLoads.Count).ToList();
List <int> nU = input.LoadCases.Select(l => l.UniformLoads.Count).ToList();
List <int> nW = input.LoadCases.Select(l => l.TrapLoads.Count).ToList();
float[,,] U = new float[nL, nE, 4];
for (int i = 0; i < nL; i++)
{
for (int j = 0; j < nE; j++)
{
//U[i, j, 0] will store node index, but not all of them will be assigned a value.
//For those not assigned, they are the same value for node index 0.
//This will cause some trouble later, so have to be initialized with another value.
//The problem is caused by converting from 1 based array in the C code to 0 based array in C# here.
U[i, j, 0] = -1;
}
}
float[,,] W = new float[nL, nE *10, 13];
for (int i = 0; i < nL; i++)
{
for (int j = 0; j < nE * 10; j++)
{
W[i, j, 0] = -1;//Same reason for array U
}
}
double[,,] eqFMech = new double[nL, nE, 12];
double[,] FMech = new double[nL, DoF];
bool shear = input.IncludeShearDeformation;
bool geom = input.IncludeGeometricStiffness;
float dx = input.XAxisIncrementForInternalForces;
double[] F = new double[DoF];
double[] dF = new double[DoF];
double[] D = new double[DoF];
double[] dD = new double[DoF];
double[] R = new double[DoF];
double[] dR = new double[DoF];
double[,] Q = new double[nE, 12];
double[,] K = new double[DoF, DoF];
////These are not used
int[] nT = new int[nL];
int[] nP = new int[nL];
int[] nD = new int[nL];
double[,] FTemp = new double[nL, DoF];
double[,,] eqFTemp = new double[nL, nE, 12];
int iter = 0;
double tol = 1.0e-9;
float[,,] P = new float[nL, 10 * nE, 5];
double[,] Dp = new double[nL, DoF];
////
IReadOnlyList <LoadCase> loadCases = input.LoadCases;
Frame3ddIO.AssembleLoads(nN, nE, nL, DoF, xyz, L, Le, N1, N2, Ax, Asy, Asz, Iy, Iz, E, G, p, d, gX, gY, gZ, shear, nF, nU, nW, FMech, eqFMech,
U, W, loadCases);
//ReadMassData()--Not implemented
//ReadCondensationData()--Not implemented
string outputText = Frame3ddIO.InputDataToString(title, nN, nE, nL, nD, nR, nF, nU, nW, nP, nT,
xyz, rj, N1, N2, Ax, Asy, Asz, Jx, Iy, Iz, E, G, p,
d, gX, gY, gZ,
FMech, Dp, r, U, W, P, shear, geom);
////Start anlyz
/* begin load case analysis loop */
List <LoadCaseOutput> loadCaseOutputs = new List <LoadCaseOutput>();
for (int lc = 0; lc < nL; lc++)
{
/* initialize displacements and displ. increment to {0} */
/* initialize reactions and react. increment to {0} */
for (int i = 0; i < DoF; i++)
{
D[i] = dD[i] = R[i] = dR[i] = 0.0;
}
/* initialize internal element end forces Q = {0} */
for (int i = 0; i < nE; i++)
{
for (int j = 0; j < 11; j++)
{
Q[i, j] = 0.0;
}
}
K = Frame3dd.AssembleK(DoF, nE, xyz, r, L, Le, N1, N2, Ax, Asy, Asz, Jx, Iy, Iz, E, G, p, shear, geom, Q);
//if (nT[lc] > 0){
//Aplly temperature loads only --Not implemented
//}
if (nF[lc] > 0 || nU[lc] > 0 || nW[lc] > 0 || nP[lc] > 0 || nD[lc] > 0 ||
gX[lc] != 0 || gY[lc] != 0 || gZ[lc] != 0)
{
for (int i = 0; i < DoF; i++)
{
if (!Common.IsDoubleZero(r[i]))
{
dD[i] = Dp[lc, i];
}
}
}
double[] tempLoadMech = Common.GetRow(FMech, lc);
var solveSystemResult = Frame3dd.SolveSystem(K, dD, tempLoadMech, dR, DoF, q, r, ok, rmsResid);
ok = solveSystemResult.ok;
rmsResid = solveSystemResult.rmsResid;
for (int i = 0; i < DoF; i++)
{
FMech[lc, i] = tempLoadMech[i];
}
for (int i = 0; i < DoF; i++)
{
if (!Common.IsDoubleZero(q[i]))
{
D[i] += dD[i];
}
else
{
D[i] = Dp[lc, i]; dD[i] = 0.0;
}
}
for (int i = 0; i < DoF; i++)
{
if (!Common.IsDoubleZero(r[i]))
{
R[i] += dR[i];
}
}
/* combine {F} = {F_t} + {F_m} */
for (int i = 0; i < DoF; i++)
{
F[i] = FTemp[lc, i] + FMech[lc, i];
}
double[,] tempTArray = Common.GetArray(eqFTemp, lc);
double[,] tempMArray = Common.GetArray(eqFMech, lc);
Frame3dd.ElementEndForces(Q, nE, xyz, L, Le, N1, N2,
Ax, Asy, Asz, Jx, Iy, Iz, E, G, p,
tempTArray, tempMArray, D, shear, geom,
axialStrainWarning);
error = Frame3dd.EquilibriumError(dF, F, K, D, DoF, q, r);
//if (geom && verbose)
// fprintf(stdout, "\n Non-Linear Elastic Analysis ...\n");
if (geom)
{
//Not implemented
}
while (geom && error > tol && iter < 500 && ok >= 0)
{
//Not implemented
}
//Not implemented
/* strain limit failure ... */
//if (axial_strain_warning > 0 && ExitCode == 0) ExitCode = 182;
/* strain limit _and_ buckling failure ... */
//if (axial_strain_warning > 0 && ExitCode == 181) ExitCode = 183;
//if (geom) compute_reaction_forces(R, F, K, D, DoF, r);
if (writeMatrix != 0)/* write static stiffness matrix */
{
//save_ut_dmatrix("Ks", K, DoF, "w");//Not implemented
}
/* display RMS equilibrium error */
//if (verbose && ok >= 0)
// evaluate(error, rms_resid, tol, geom);
var staticResults = Frame3ddIO.GetStaticResults(nN, nE, nL, lc, DoF, N1, N2, F, D, R, r, Q, error, ok, axialSign);
////Not implemented
//if (filetype == 1)
//{ // .CSV format output
// write_static_csv(OUT_file, title,
// nN, nE, nL, lc, DoF, N1, N2, F, D, R, r, Q, error, ok);
//}
//if (filetype == 2)
//{ // .m matlab format output
// write_static_mfile(OUT_file, title, nN, nE, nL, lc, DoF,
// N1, N2, F, D, R, r, Q, error, ok);
//}
float[,] tempU2DArray = Common.GetArray(U, lc);
float[,] tempW2DArray = Common.GetArray(W, lc);
float[,] tempP2DArray = Common.GetArray(P, lc);
List <PeakFrameElementInternalForce> internalForce = Frame3ddIO.GetInternalForces(lc, nL, title, dx, xyz,
Q, nN, nE, L, N1, N2,
Ax, Asy, Asz, Jx, Iy, Iz, E, G, p,
d, gX[lc], gY[lc], gZ[lc],
nU[lc], tempU2DArray, nW[lc], tempW2DArray, nP[lc], tempP2DArray,
D, shear, error);
loadCaseOutputs.Add(new LoadCaseOutput(error, staticResults.nodeDisplacements, staticResults.frameElementEndForces,
staticResults.reactionOutputs, internalForce));
//static_mesh ()
//...
}
outputText += Frame3ddIO.OutputDataToString(loadCaseOutputs);
Output output = new Output(outputText, loadCaseOutputs);
return(output);
}
