public PlateCombine GetMinPlateCombine(PlateModel source, float T, string type, float limit = -1)
{
RectHelper rect = new RectHelper();
CopyOper co = new CopyOper();
PlateModel pm = co.CopyPlate(source);
PlateModel pmnew = co.CopyPlate(source); //旋转180后的图形
pmnew = Rotate(pmnew, 180);
List <PointF> pnew = pmnew.OutModel.ExpandPoint;
List <PointF> chnew = rect.GetConvexHull(pmnew.OutModel.ExpandPoint);
List <PointF> p = pm.OutModel.ExpandPoint;
List <PointF> ch = rect.GetConvexHull(pm.OutModel.ExpandPoint);
Dictionary <string, object> diccombine = rect.Combine(p, ch, pnew, chnew, T, limit, type, 0.9f);
List <PointF> chcombine = (List <PointF>)diccombine["convexhull"];
Move(pmnew, Convert.ToSingle(diccombine["movex"]), Convert.ToSingle(diccombine["movey"]));
RotateAndMove(pm, pmnew, Convert.ToSingle(diccombine["angle"]));
PlateCombine pc = new PlateCombine(pm, pmnew);
pc.flag = diccombine["flag"].ToString();
pc.Rect = pm.Rect = pmnew.Rect = GetRect(pm.OutModel.ExpandPoint, pmnew.OutModel.ExpandPoint);
return(pc);
}
/// <summary>
/// 组合图形旋转归位
/// </summary>
/// <param name="pm"></param>
/// <param name="angle"></param>
/// <returns></returns>
public PlateCombine RotateAndMove(PlateCombine pc, float angle)
{
CopyOper co = new CopyOper();
PlateModel pm1 = co.CopyPlate(pc.Plate1);
PlateModel pm2 = co.CopyPlate(pc.Plate2);
RotateOper ro = new RotateOper();
pm1 = ro.RotatePlate(pm1, new PointF(0, 0), angle);
pm2 = ro.RotatePlate(pm2, new PointF(0, 0), angle);
float maxX = pm1.OutModel.ExpandPoint[0].X;
float maxY = pm1.OutModel.ExpandPoint[0].Y;
float minX = pm1.OutModel.ExpandPoint[0].X;
float minY = pm1.OutModel.ExpandPoint[0].Y;
for (int i = 0; i < pm1.OutModel.ExpandPoint.Count; i++)
{
if (maxX < pm1.OutModel.ExpandPoint[i].X)
{
maxX = pm1.OutModel.ExpandPoint[i].X;
}
if (maxY < pm1.OutModel.ExpandPoint[i].Y)
{
maxY = pm1.OutModel.ExpandPoint[i].Y;
}
if (minX > pm1.OutModel.ExpandPoint[i].X)
{
minX = pm1.OutModel.ExpandPoint[i].X;
}
if (minY > pm1.OutModel.ExpandPoint[i].Y)
{
minY = pm1.OutModel.ExpandPoint[i].Y;
}
}
for (int i = 0; i < pm2.OutModel.ExpandPoint.Count; i++)
{
if (maxX < pm2.OutModel.ExpandPoint[i].X)
{
maxX = pm2.OutModel.ExpandPoint[i].X;
}
if (maxY < pm2.OutModel.ExpandPoint[i].Y)
{
maxY = pm2.OutModel.ExpandPoint[i].Y;
}
if (minX > pm2.OutModel.ExpandPoint[i].X)
{
minX = pm2.OutModel.ExpandPoint[i].X;
}
if (minY > pm2.OutModel.ExpandPoint[i].Y)
{
minY = pm2.OutModel.ExpandPoint[i].Y;
}
}
MoveOper mo = new MoveOper();
mo.MovePlate(pm1, -minX, -minY);
mo.MovePlate(pm2, -minX, -minY);
PlateCombine pcnew = new PlateCombine(pm1, pm2);
pcnew.Rect = pc.Rect;
//if (angle == 90)
//{
// pcnew .Rect = new RectangleF(0, 0, pc .Rect .Height, pc .Rect .Width);
//}
pcnew.Rect = GetRect(pm1.OutModel.ExpandPoint, pm2.OutModel.ExpandPoint);
return(pcnew);
}
public List <PlateCombine> GetMinPlateCombineAll(PlateModel source, float T, string type, float limit = -1, bool _matchwidth = false
, float _matchrate = 0.9f)
{
RectHelper rect = new RectHelper();
CopyOper co = new CopyOper();
PlateModel pm = co.CopyPlate(source);
PlateModel pmnew = co.CopyPlate(source); //旋转180后的图形
pmnew = Rotate(pmnew, 180);
List <PointF> pnew = pmnew.OutModel.ExpandPoint;
List <PointF> chnew = rect.GetConvexHull(pmnew.OutModel.ExpandPoint);
List <PointF> p = pm.OutModel.ExpandPoint;
List <PointF> ch = rect.GetConvexHull(pm.OutModel.ExpandPoint);
var tp = rect.CombineAll(p, ch, pnew, chnew, T, limit, type, _matchwidth, _matchrate);
List <PlateCombine> pc = new List <PlateCombine>();
if (Convert.ToSingle(tp.Item1["area"].ToString()) > 0)
{
PlateModel pm1 = co.CopyPlate(pm);
PlateModel pmnew1 = co.CopyPlate(pmnew);
Move(pmnew1, Convert.ToSingle(tp.Item1["movex"]), Convert.ToSingle(tp.Item1["movey"]));
RotateAndMove(pm1, pmnew1, Convert.ToSingle(tp.Item1["angle"]));
PlateCombine pc1 = new PlateCombine(pm1, pmnew1, Convert.ToSingle(tp.Item1["angle"]), Convert.ToSingle(tp.Item1["angle2"]));
pc1.Rect = pm1.Rect = pmnew1.Rect = GetRect(pm1.OutModel.ExpandPoint, pmnew1.OutModel.ExpandPoint);
pc.Add(pc1);
}
if (Convert.ToSingle(tp.Item2["area"].ToString()) > 0)
{
PlateModel pm2 = co.CopyPlate(pm);
PlateModel pmnew2 = co.CopyPlate(pmnew);
Move(pmnew2, Convert.ToSingle(tp.Item2["movex"]), Convert.ToSingle(tp.Item2["movey"]));
RotateAndMove(pm2, pmnew2, Convert.ToSingle(tp.Item2["angle"]));
PlateCombine pc2 = new PlateCombine(pm2, pmnew2, Convert.ToSingle(tp.Item1["angle"]), Convert.ToSingle(tp.Item1["angle2"]));
pc2.Rect = pm2.Rect = pmnew2.Rect = GetRect(pm2.OutModel.ExpandPoint, pmnew2.OutModel.ExpandPoint);
pc.Add(pc2);
}
if (Convert.ToSingle(tp.Item3["area"].ToString()) > 0)
{
PlateModel pm3 = co.CopyPlate(pm);
PlateModel pmnew3 = co.CopyPlate(pmnew);
Move(pmnew3, Convert.ToSingle(tp.Item3["movex"]), Convert.ToSingle(tp.Item3["movey"]));
RotateAndMove(pm3, pmnew3, Convert.ToSingle(tp.Item3["angle"]));
PlateCombine pc3 = new PlateCombine(pm3, pmnew3, Convert.ToSingle(tp.Item1["angle"]), Convert.ToSingle(tp.Item1["angle2"]));
pc3.Rect = pm3.Rect = pmnew3.Rect = GetRect(pm3.OutModel.ExpandPoint, pmnew3.OutModel.ExpandPoint);
pc.Add(pc3);
}
if (Convert.ToSingle(tp.Item4["area"].ToString()) > 0)
{
PlateModel pm4 = co.CopyPlate(pm);
PlateModel pmnew4 = co.CopyPlate(pmnew);
Move(pmnew4, Convert.ToSingle(tp.Item4["movex"]), Convert.ToSingle(tp.Item4["movey"]));
RotateAndMove(pm4, pmnew4, Convert.ToSingle(tp.Item4["angle"]));
PlateCombine pc4 = new PlateCombine(pm4, pmnew4, Convert.ToSingle(tp.Item1["angle"]), Convert.ToSingle(tp.Item1["angle2"]));
pc4.Rect = pm4.Rect = pmnew4.Rect = GetRect(pm4.OutModel.ExpandPoint, pmnew4.OutModel.ExpandPoint);
pc.Add(pc4);
}
if (Convert.ToSingle(tp.Item1["area"].ToString()) > 0)
{
PlateModel pm5 = co.CopyPlate(pm);
PlateModel pmnew5 = co.CopyPlate(pmnew);
Move(pmnew5, Convert.ToSingle(tp.Item1["movex"]), Convert.ToSingle(tp.Item1["movey"]));
RotateAndMove(pm5, pmnew5, Convert.ToSingle(tp.Item1["angle2"]));
PlateCombine pc5 = new PlateCombine(pm5, pmnew5, Convert.ToSingle(tp.Item1["angle"]), Convert.ToSingle(tp.Item1["angle2"]));
pc5.Rect = pm5.Rect = pmnew5.Rect = GetRect(pm5.OutModel.ExpandPoint, pmnew5.OutModel.ExpandPoint);
pc.Add(pc5);
}
if (Convert.ToSingle(tp.Item2["area"].ToString()) > 0)
{
PlateModel pm6 = co.CopyPlate(pm);
PlateModel pmnew6 = co.CopyPlate(pmnew);
Move(pmnew6, Convert.ToSingle(tp.Item2["movex"]), Convert.ToSingle(tp.Item2["movey"]));
RotateAndMove(pm6, pmnew6, Convert.ToSingle(tp.Item2["angle2"]));
PlateCombine pc6 = new PlateCombine(pm6, pmnew6, Convert.ToSingle(tp.Item1["angle"]), Convert.ToSingle(tp.Item1["angle2"]));
pc6.Rect = pm6.Rect = pmnew6.Rect = GetRect(pm6.OutModel.ExpandPoint, pmnew6.OutModel.ExpandPoint);
pc.Add(pc6);
}
if (Convert.ToSingle(tp.Item3["area"].ToString()) > 0)
{
PlateModel pm7 = co.CopyPlate(pm);
PlateModel pmnew7 = co.CopyPlate(pmnew);
Move(pmnew7, Convert.ToSingle(tp.Item3["movex"]), Convert.ToSingle(tp.Item3["movey"]));
RotateAndMove(pm7, pmnew7, Convert.ToSingle(tp.Item3["angle2"]));
PlateCombine pc7 = new PlateCombine(pm7, pmnew7, Convert.ToSingle(tp.Item1["angle"]), Convert.ToSingle(tp.Item1["angle2"]));
pc7.Rect = pm7.Rect = pmnew7.Rect = GetRect(pm7.OutModel.ExpandPoint, pmnew7.OutModel.ExpandPoint);
pc.Add(pc7);
}
if (Convert.ToSingle(tp.Item4["area"].ToString()) > 0)
{
PlateModel pm8 = co.CopyPlate(pm);
PlateModel pmnew8 = co.CopyPlate(pmnew);
Move(pmnew8, Convert.ToSingle(tp.Item4["movex"]), Convert.ToSingle(tp.Item4["movey"]));
RotateAndMove(pm8, pmnew8, Convert.ToSingle(tp.Item4["angle2"]));
PlateCombine pc8 = new PlateCombine(pm8, pmnew8, Convert.ToSingle(tp.Item1["angle"]), Convert.ToSingle(tp.Item1["angle2"]));
pc8.Rect = pm8.Rect = pmnew8.Rect = GetRect(pm8.OutModel.ExpandPoint, pmnew8.OutModel.ExpandPoint);
pc.Add(pc8);
}
return(pc);
}