internal void Apply(Chart chart)
{
chart.BeginUpdate();
IRenderer renderer = chart.Renderers.GetRenderer(Renderer);
if (renderer != null)
{
renderer.Options = RendererOptions;
BaseRenderer renderer2 = renderer as BaseRenderer;
if (renderer2 != null)
{
renderer2.Symbol = Symbol;
renderer2.Connection = Connection;
}
if (chart.Data != null)
{
chart.Data.Renderer = renderer;
using (IEnumerator <DataSeries> enumerator = chart.Data.Children.GetEnumerator())
{
while (enumerator.MoveNext())
{
enumerator.Current.ClearDataCache();
}
}
}
if ((chart.View != null) && chart.View.Inverted)
{
renderer2.Inverted = !renderer2.Inverted;
}
}
chart.EndUpdate();
}
protected override bool Render(RenderContext rc)
{
if (double.IsInfinity(rc.Rect.Width) || double.IsInfinity(rc.Rect.Height))
{
return(false);
}
Rect rect = rc.Rect;
if (double.IsNaN(rect.X) || double.IsNaN(rect.Y))
{
return(false);
}
if ((rect.Width == 0.0) || (rect.Height == 0.0))
{
BaseRenderer renderer = rc.Renderer as BaseRenderer;
if ((renderer != null) && (renderer.Stacked != StackedOptions.None))
{
return(false);
}
}
rect = rect.IntersectRect(rc.Bounds);
if (rect.IsEmptyRect())
{
return(false);
}
// uno不支持Path.Data为非PathGeometry！
// wasm中在给Path.Data赋值前内容必须完整，后添加的Figures无效！众里寻他千百度，因为赋值没按顺序，操！
PathGeometry geometry = new PathGeometry();
PathFigure pf = new PathFigure();
pf.Segments.Add(new LineSegment {
Point = new Point()
});
pf.Segments.Add(new LineSegment {
Point = new Point(rect.Width, 0)
});
pf.Segments.Add(new LineSegment {
Point = new Point(rect.Width, rect.Height)
});
pf.Segments.Add(new LineSegment {
Point = new Point(0, rect.Height)
});
pf.Segments.Add(new LineSegment {
Point = new Point()
});
geometry.Figures.Add(pf);
Data = geometry;
Canvas.SetLeft(this, rect.X);
Canvas.SetTop(this, rect.Y);
RectangleGeometry geometry2 = new RectangleGeometry();
_labelRect = new Rect(-1.0, -1.0, rect.Width + 2.0, rect.Height + 2.0);
geometry2.Rect = _labelRect;
Clip = geometry2;
return(true);
}
protected override bool Render(RenderContext rc)
{
Point[] points = rc.Points;
if ((points == null) || (points.Length < 2))
{
return(false);
}
BaseRenderer renderer = rc.Renderer as BaseRenderer;
bool inverted = (renderer != null) && renderer.Inverted;
points = Lines.CreateSteps(points, inverted);
Rect rect = rc.Bounds2D;
bool isCustomClipping = rc.IsCustomClipping;
// uno不支持Path.Data为非PathGeometry！
// wasm中在给Path.Data赋值前内容必须完整，后添加的Figures无效！众里寻他千百度，因为赋值没按顺序，操！
PathGeometry geometry = new PathGeometry();
if (rc.hasNan)
{
List <Point[]> list = base.SplitPointsWithHoles(points);
if (list != null)
{
for (int i = 0; i < list.Count; i++)
{
PathFigure[] figureArray = base.RenderSegment(list[i], double.NaN, isCustomClipping ? rect : Extensions.EmptyRect);
int length = figureArray.Length;
for (int j = 0; j < length; j++)
{
geometry.Figures.Add(figureArray[j]);
}
}
}
}
else
{
PathFigure[] figureArray2 = base.RenderSegment(points, double.NaN, isCustomClipping ? rect : Extensions.EmptyRect);
int num4 = figureArray2.Length;
for (int k = 0; k < num4; k++)
{
geometry.Figures.Add(figureArray2[k]);
}
}
Data = geometry;
_labelRect = rect;
if (!isCustomClipping)
{
RectangleGeometry geometry2 = new RectangleGeometry();
geometry2.Rect = rect;
base.Clip = geometry2;
}
return(true);
}
protected override bool Render(RenderContext rc)
{
Point[] points = rc.Points;
if (points == null)
{
return(false);
}
BaseRenderer renderer = rc.Renderer as BaseRenderer;
bool inverted = (renderer != null) && renderer.Inverted;
bool flag2 = (renderer != null) && renderer.IsStacked;
double[] previousValues = rc.PreviousValues;
double d = inverted ? rc.ConvertX(0.0) : rc.ConvertY(0.0);
double naN = double.NaN;
if ((rc.OptimizationRadiusScope & OptimizationRadiusScope.Lines) > ((OptimizationRadiusScope)0))
{
naN = rc.OptimizationRadius;
}
if (double.IsNaN(d))
{
d = inverted ? (rc.XReversed ? (rc.Bounds2D.X + rc.Bounds2D.Width) : rc.Bounds2D.X) : (rc.YReversed ? rc.Bounds2D.Y : (rc.Bounds2D.Y + rc.Bounds2D.Height));
}
Rect cr = rc.IsCustomClipping ? new Rect(rc.Bounds2D.X - 2.0, rc.Bounds2D.Y - 2.0, rc.Bounds2D.Width + 4.0, rc.Bounds2D.Height + 4.0) : Extensions.EmptyRect;
// uno不支持Path.Data为非PathGeometry！
// wasm中在给Path.Data赋值前内容必须完整，后添加的Figures无效！众里寻他千百度，因为赋值没按顺序，操！
PathGeometry geometry = new PathGeometry();
if (flag2 && (previousValues != null))
{
points = Lines.CreateSteps(points, inverted);
previousValues = Lines.CreateSteps(previousValues);
int length = points.Length;
Point[] pts = new Point[2 * length];
for (int i = 0; i < length; i++)
{
pts[i] = points[i];
if (inverted)
{
pts[length + i] = new Point(rc.ConvertX(previousValues[(length - i) - 1]), points[(length - i) - 1].Y);
}
else
{
pts[length + i] = new Point(points[(length - i) - 1].X, rc.ConvertY(previousValues[(length - i) - 1]));
}
}
if (pts != null)
{
PathFigure figure = base.RenderSegment(pts);
geometry.Figures.Add(figure);
}
}
else
{
points = Lines.CreateSteps(points, inverted);
List <Point[]> list = base.SplitPointsWithHoles(points);
if (list != null)
{
for (int j = 0; j < list.Count; j++)
{
PathFigure figure2 = null;
figure2 = base.RenderNonStacked(list[j], d, inverted, naN, cr);
if (figure2 != null)
{
geometry.Figures.Add(figure2);
}
}
}
}
Data = geometry;
RectangleGeometry geometry3 = new RectangleGeometry();
_labelRect = rc.Bounds2D;
geometry3.Rect = _labelRect;
Clip = geometry3;
return(true);
}
protected override bool Render(RenderContext rc)
{
Point[] points = rc.Points;
if ((points == null) || (points.Length < 2))
{
return(false);
}
BaseRenderer renderer = rc.Renderer as BaseRenderer;
if (renderer == null)
{
return(false);
}
bool inverted = renderer.Inverted;
double naN = double.NaN;
if ((rc.OptimizationRadiusScope & OptimizationRadiusScope.Lines) > ((OptimizationRadiusScope)0))
{
naN = rc.OptimizationRadius;
}
double[] previousValues = rc.PreviousValues;
Point[] pts = null;
// uno不支持Path.Data为非PathGeometry！
// wasm中在给Path.Data赋值前内容必须完整，后添加的Figures无效！众里寻他千百度，因为赋值没按顺序，操！
PathGeometry geometry = new PathGeometry();
if (renderer.IsStacked && previousValues != null)
{
int length = points.Length;
if ((previousValues != null) && (previousValues.Length == length))
{
if (base.Smoothed && (length > 3))
{
Point[] pointArray3 = InitPrevious(rc, inverted, points, previousValues);
points = new SplineNew(points).Calculate();
pointArray3 = new SplineNew(pointArray3).Calculate();
length = points.Length;
pts = new Point[2 * length];
for (int i = 0; i < length; i++)
{
pts[i] = points[i];
pts[length + i] = pointArray3[(length - i) - 1];
}
}
else
{
pts = new Point[2 * length];
for (int j = 0; j < length; j++)
{
pts[j] = points[j];
if (inverted)
{
pts[length + j] = new Point(rc.ConvertX(previousValues[(length - j) - 1]), points[(length - j) - 1].Y);
}
else
{
pts[length + j] = new Point(points[(length - j) - 1].X, rc.ConvertY(previousValues[(length - j) - 1]));
}
}
}
}
if (pts != null)
{
PathFigure figure = RenderSegment(pts);
geometry.Figures.Add(figure);
}
}
else
{
double num5 = inverted ? rc.ConvertX(0.0) : rc.ConvertY(0.0);
if (double.IsNaN(num5))
{
num5 = inverted ? (rc.XReversed ? (rc.Bounds.X + rc.Bounds.Width) : rc.Bounds.X) : (rc.YReversed ? rc.Bounds.Y : (rc.Bounds.Y + rc.Bounds.Height));
}
List <Point[]> list = base.SplitPointsWithHoles(points);
Rect cr = rc.IsCustomClipping ? new Rect(rc.Bounds2D.X - 2.0, rc.Bounds2D.Y - 2.0, rc.Bounds2D.Width + 4.0, rc.Bounds2D.Height + 4.0) : Extensions.EmptyRect;
if (list != null)
{
for (int k = 0; k < list.Count; k++)
{
Point[] pointArray4 = list[k];
PathFigure figure;
if (renderer is RadarRenderer)
{
figure = RenderSegment(pointArray4);
}
else
{
figure = RenderNonStacked(pointArray4, num5, inverted, naN, cr);
}
if (figure != null)
{
geometry.Figures.Add(figure);
}
}
}
}
Data = geometry;
RectangleGeometry geometry2 = new RectangleGeometry();
geometry2.Rect = new Rect(rc.Bounds.X, rc.Bounds.Y, rc.Bounds.Width, rc.Bounds.Height);
base.Clip = geometry2;
return(true);
}
internal RenderContext(IRenderer renderer, IDataSeriesInfo ds, int npts)
{
_cur = new Point();
_prev = new Point();
_curView = new Point();
_bounds = new Rect();
_stacked = new List <double>();
_excludeHoles = true;
_pts = new List <Point>();
_rect = Extensions.EmptyRect;
_clipBounds = Extensions.EmptyRect;
_rendrerer = renderer;
_ds = ds;
_pts.Capacity = npts;
if (_ds != null)
{
_names = _ds.GetDataNames();
}
Chart visual = renderer.Visual as Chart;
Chart = visual;
BaseRenderer renderer2 = renderer as BaseRenderer;
_isStacked = (renderer2 != null) && renderer2.IsStacked;
hasNan = renderer2._dataInfo.hasNaN;
DataSeries series = ds as DataSeries;
if (series != null)
{
Renderer2D rendererd = renderer as Renderer2D;
if ((((byte)(series.Display & SeriesDisplay.ShowNaNGap)) != 0) && (rendererd != null))
{
_excludeHoles = false;
}
if (rendererd != null)
{
string axisX = series.AxisX;
string axisY = series.AxisY;
bool flag = !string.IsNullOrEmpty(axisX);
bool flag2 = !string.IsNullOrEmpty(axisY);
if (visual != null)
{
ChartViewport2D viewElement = visual.View.Viewport;
if (viewElement != null)
{
if (flag || flag2)
{
foreach (Axis axis in viewElement.Axes)
{
if (flag && (axis.AxisName == axisX))
{
_ax = axis;
hasNan = true;
}
if (flag2 && (axis.AxisName == axisY))
{
_ay = axis;
hasNan = true;
}
}
}
_defax = viewElement._ax;
_defay = viewElement._ay;
}
}
}
}
if (visual.View != null)
{
ChartView view = visual.View;
if (_ax != null)
{
XReversed = _ax.ReversedInternal;
}
else if (visual.View.AxisX != null)
{
XReversed = visual.View.AxisX.Reversed;
}
if (_ay != null)
{
YReversed = _ay.ReversedInternal;
}
else if (visual.View.AxisY != null)
{
YReversed = visual.View.AxisY.Reversed;
}
Axis axis2 = visual.View.GetAxisX(series);
if ((axis2 != null) && !double.IsNaN(axis2.LogBase))
{
hasNan = true;
}
Axis axis3 = visual.View.GetAxisY(series);
if ((axis3 != null) && !double.IsNaN(axis3.LogBase))
{
hasNan = true;
}
if ((renderer2 != null) && renderer2.Inverted)
{
if ((axis2 != null) && (axis2.PlotAreaIndex != 0))
{
ClusterPlotAreaIndex = axis2.PlotAreaIndex;
}
}
else if ((axis3 != null) && (axis3.PlotAreaIndex != 0))
{
ClusterPlotAreaIndex = axis3.PlotAreaIndex;
}
}
}