public static void StartListener(int listenPort)
{
try
{
listener = new UdpClient(listenPort);
}
catch
{
return;
}
listenerEndPoint = new IPEndPoint(IPAddress.Any, listenPort);
byte[] receiveByteArray;
try
{
ImportExport.LogMessage("Listener started on Port " + listenPort + "...", true);
closeListener = false;
while (!closeListener)
{
receiveByteArray = listener.Receive(ref listenerEndPoint);
if (receiveByteArray.Length > 0)
{
if (FormMain.receivedData.Length == 0)
{
FormMain.receivedData = ":" + Encoding.ASCII.GetString(receiveByteArray, 0, receiveByteArray.Length) + ":";
if (FormMain.receivedData.Length > 4 && FormMain.logDetail)
{
ImportExport.LogMessage("Received package: " + FormMain.receivedData, true);
}
}
else
{
receivedData2 = Encoding.ASCII.GetString(receiveByteArray, 0, receiveByteArray.Length);
FormMain.receivedData += ":" + receivedData2.Substring(receivedData2.IndexOf("*") + 1) + ":";
if (FormMain.receivedData.Length > 4 && FormMain.logDetail)
{
ImportExport.LogMessage("+ Received package: " + FormMain.receivedData, true);
}
}
}
}
}
catch (Exception e)
{
ImportExport.LogMessage("Listener Exception: " + e.Message, true);
}
finally
{
ListenerClose();
}
}
public static void ListenerClose()
{
try
{
closeListener = true;
listener.Close();
}
catch (Exception e)
{
ImportExport.LogMessage("ListenerClose ... " + e.ToString(), true);
}
}
/// <summary>
/// Set the pin direction on the arcaze
/// </summary>
/// <param name="port">Connector A = 0;B = 1;C = 2</param>
/// <param name="pin">0 - 19</param>
/// <param name="direction">0 = input; 1 = output</param>
public void SetPinDirection(int port, int pin, int direction)
{
try
{
if (FormMain.logDetail)
{
ImportExport.LogMessage(GetSerial + " SetPinDirection(Connector: " + port.ToString("X2") + ", Pin: " + (pin + 1).ToString("D2") + ", Direction: " + (direction == 1 ? "Output" : "Input") + ")", true);
}
this.arcazeDevice.Command.CmdSetPinDirection(port, pin, direction);
}
catch (Exception f)
{
ImportExport.LogMessage(GetSerial + " SetPinDirection(Connector: " + port.ToString("X2") + ", Pin: " + (pin + 1).ToString("D2") + ", Direction: " + (direction == 1 ? "Output" : "Input") + ") .. " + f.ToString(), true);
}
}
/// <summary>
/// Init a display driver
/// </summary>
/// <param name="devAdress">The unique device address of the Display Module (set by the rotary switch on the board)</param>
/// <param name="decodeMode">0x00 = No decoding / 0xFF = Code B Decoding (only lower data nibble used then), default = 0x00</param>
/// <param name="intensity">0x00 ... 0x0F</param>
/// <param name="scanLimit">4 ... 8 allowed (default = 8, no need to change)</param>
public void InitDisplayDriver(int devAdress, int decodeMode, int intensity, int scanLimit)
{
try
{
if (FormMain.logDetail)
{
ImportExport.LogMessage(GetSerial + " CmdMax7219DisplayInit(Modul: " + devAdress.ToString("X2") + ", decodeMode:" + decodeMode.ToString("X2") + ", intensity: "
+ intensity.ToString("X2") + ", scanLimit: " + scanLimit.ToString("X2") + ")", true);
}
this.arcazeDevice.Command.CmdMax7219DisplayInit(devAdress, decodeMode, intensity, scanLimit);
}
catch (Exception e)
{
ImportExport.LogMessage(GetSerial + " CmdMax7219DisplayInit(Modul: " + devAdress.ToString("X2") + ", decodeMode:" + decodeMode.ToString("X2") + ", intensity: "
+ intensity.ToString("X2") + ", scanLimit: " + scanLimit.ToString("X2") + ") .. " + e.ToString(), true);
}
}
/// <summary>
///
/// </summary>
/// <param name="devAdress">0 .. 15</param>
/// <param name="digit">SevenSegment Value</param>
/// <param name="digitMask">0x00 .. 0xFF</param>
public void WriteDigitsToDisplayDriver(int devAdress, ref string[] digit, int digitMask, bool log, bool reverse, ref int segmentIndex, int cycle, int delay)
{
Digits = new List <byte>(8);
if (reverse)
{
for (int n = 0; n < 8; n++)
{
if (digit[n] == "0")
{
Digits.Add(0);
}
else
{
break;
}
}
for (int n = segmentIndex; n > 0; n--)
{
Digits.Add(byte.Parse(digit[n - 1], NumberStyles.HexNumber));
}
}
else
{
for (int n = 0; n < 8; n++)
{
Digits.Add(byte.Parse(digit[n], NumberStyles.HexNumber));
}
}
try
{
arcazeDevice.Command.CmdMax7219WriteDigits(devAdress, Digits, digitMask);
for (int n = 0; n < cycle; n++)
{
StopWatch.NOP(delay);
arcazeDevice.Command.CmdMax7219WriteDigits(devAdress, Digits, digitMask);
}
if (FormMain.logDetail)
{
digitsValue = "";
for (int n = 7; n > -1; n--)
{
digitsValue += Digits[n].ToString("X2") + " ";
}
ImportExport.LogMessage(GetSerial + " CmdMax7219WriteDigits(Modul: " + devAdress.ToString("X2") + ", Digits: " + digitsValue + ", Mask: " + (digitMask).ToString("X2") + ")", true);
}
}
catch (Exception e)
{
digitsValue = "";
for (int n = 0; n < 8; n++)
{
digitsValue = Digits[n].ToString("X2") + " ";
}
ImportExport.LogMessage(GetSerial + " CmdMax7219WriteDigits(Modul: " + devAdress.ToString("X2") + ", Digits: " + digitsValue + ", Mask: " + (digitMask).ToString("X2")
+ ") .. " + e.ToString(), true);
}
}
public void LEDWriteOutput(ref int moduleNum, ref int connectorNum, ref int portNum, ref int resolution, Double data, int type, bool reverse, bool log)
{
if (arcazeDevice == null)
{
return;
}
if (type != 3)
{
if (data < 0.485 && data > 0.001)
{
return;
}
if (data > 0.515 && data < 0.999)
{
return;
}
data = (data > 0.5 ? 1 : 0); // Arcaze and LED-Driver 2
if (reverse)
{
data = (data == 1 ? 0 : 1);
}
}
else
{
if (reverse)
{
data = 1 - data;
}
resolutionValue = Convert.ToUInt32(ResolutionValue(ref resolution)); // LED-Driver 3
data *= resolutionValue;
if (data > resolutionValue)
{
data = resolutionValue;
}
if (data < 0)
{
data = 0;
}
}
if (connectorNum > 1)
{
connectorNum -= 2;
}
try
{
if (FormMain.logDetail)
{
ImportExport.LogMessage(GetSerial + " WriteOutputPort(Modul: " + moduleNum.ToString("X2") + ", Connector: " + connectorNum.ToString("X2") + ", Pin: " + (portNum + 1).ToString("D2") + ", Value: " + (data == 0 ? "Off" : (type != 3 ? "On" : data.ToString())) + ")", true);
}
this.arcazeDevice.Command.WriteOutputPort(moduleNum, connectorNum, portNum, Convert.ToUInt32(data), ArcazeCommand.OutputOperators.PlainWrite, false);
this.arcazeDevice.Command.UpdateOutputPorts();
}
catch (Exception e)
{
ImportExport.LogMessage(GetSerial + " WriteOutputPort(Modul: " + moduleNum.ToString("X2") + ", Connector: " + connectorNum.ToString("X2") + ", Pin: " + (portNum + 1).ToString("D2") + ", Value: " + (data == 0 ? "Off" : (moduleNum == 0 ? "On" : data.ToString())) + ") ... " + e.ToString(), true);
}
}