// Disposer
public override void Dispose()
{
// Not already disposed?
if (!IsDisposed)
{
// Clean up
sides = null;
floor = null;
ceiling = null;
// Dispose base
base.Dispose();
}
}
//mxd
protected void AlignTextureToClosestLine(bool alignx, bool aligny)
{
if (!(mode.HighlightedObject is BaseVisualSector))
{
return;
}
// Do we need to align this? (and also grab texture scale while we are at it)
float scaleX, scaleY;
bool isFloor = (geometrytype == VisualGeometryType.FLOOR);
if (mode.HighlightedTarget is VisualFloor)
{
VisualFloor target = (VisualFloor)mode.HighlightedTarget;
// Check texture
if (target.Sector.Sector.FloorTexture != (isFloor ? Sector.Sector.FloorTexture : Sector.Sector.CeilTexture))
{
return;
}
scaleX = target.Sector.Sector.Fields.GetValue("xscalefloor", 1.0f);
scaleY = target.Sector.Sector.Fields.GetValue("yscalefloor", 1.0f);
}
else
{
VisualCeiling target = (VisualCeiling)mode.HighlightedTarget;
// Check texture
if (target.Sector.Sector.CeilTexture != (isFloor ? Sector.Sector.FloorTexture : Sector.Sector.CeilTexture))
{
return;
}
scaleX = target.Sector.Sector.Fields.GetValue("xscaleceiling", 1.0f);
scaleY = target.Sector.Sector.Fields.GetValue("yscaleceiling", 1.0f);
}
//find a linedef to align to
Vector2D hitpos = mode.GetHitPosition();
if (!hitpos.IsFinite())
{
return;
}
//align to line of highlighted sector, which is closest to hitpos
Sector highlightedSector = ((BaseVisualSector)mode.HighlightedObject).Sector;
List <Linedef> lines = new List <Linedef>();
foreach (Sidedef side in highlightedSector.Sidedefs)
{
lines.Add(side.Line);
}
Linedef targetLine = MapSet.NearestLinedef(lines, hitpos);
if (targetLine == null)
{
return;
}
bool isFront = targetLine.SideOfLine(hitpos) > 0;
Sector.Sector.Fields.BeforeFieldsChange();
//find an angle to rotate texture
float sourceAngle = (float)Math.Round(General.ClampAngle(isFront ? -Angle2D.RadToDeg(targetLine.Angle) + 90 : -Angle2D.RadToDeg(targetLine.Angle) - 90), 1);
if (!isFront)
{
sourceAngle = General.ClampAngle(sourceAngle + 180);
}
//update angle
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "rotationfloor" : "rotationceiling"), sourceAngle, 0f);
//set scale
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "xscalefloor" : "xscaleceiling"), scaleX, 1.0f);
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "yscalefloor" : "yscaleceiling"), scaleY, 1.0f);
//update offset
float distToStart = Vector2D.Distance(hitpos, targetLine.Start.Position);
float distToEnd = Vector2D.Distance(hitpos, targetLine.End.Position);
Vector2D offset = (distToStart < distToEnd ? targetLine.Start.Position : targetLine.End.Position).GetRotated(Angle2D.DegToRad(sourceAngle));
if (alignx)
{
if (Texture != null && Texture.IsImageLoaded)
{
offset.x %= Texture.Width / scaleX;
}
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "xpanningfloor" : "xpanningceiling"), (float)Math.Round(-offset.x), 0f);
}
if (aligny)
{
if (Texture != null && Texture.IsImageLoaded)
{
offset.y %= Texture.Height / scaleY;
}
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "ypanningfloor" : "ypanningceiling"), (float)Math.Round(offset.y), 0f);
}
//update geometry
Sector.UpdateSectorGeometry(false);
}
//mxd
protected void AlignTextureToClosestLine(bool alignx, bool aligny)
{
if (!(mode.HighlightedObject is BaseVisualSector))
{
return;
}
// Do we need to align this? (and also grab texture scale while we are at it)
float scaleX, scaleY;
bool isFloor = (geometrytype == VisualGeometryType.FLOOR);
if (mode.HighlightedTarget is VisualFloor)
{
Sector target;
VisualFloor vf = (VisualFloor)mode.HighlightedTarget;
// Use the control sector if the floor belongs to a 3D floor
if (vf.ExtraFloor == null)
{
target = vf.Sector.Sector;
}
else
{
target = vf.GetControlSector();
}
// Check texture
if (target.FloorTexture != (isFloor ? Sector.Sector.FloorTexture : Sector.Sector.CeilTexture))
{
return;
}
scaleX = target.Fields.GetValue("xscalefloor", 1.0f);
scaleY = target.Fields.GetValue("yscalefloor", 1.0f);
}
else
{
Sector target;
VisualCeiling vc = (VisualCeiling)mode.HighlightedTarget;
// Use the control sector if the ceiling belongs to a 3D floor
if (vc.ExtraFloor == null)
{
target = vc.Sector.Sector;
}
else
{
target = vc.GetControlSector();
}
// Check texture
if (target.CeilTexture != (isFloor ? Sector.Sector.FloorTexture : Sector.Sector.CeilTexture))
{
return;
}
scaleX = target.Fields.GetValue("xscaleceiling", 1.0f);
scaleY = target.Fields.GetValue("yscaleceiling", 1.0f);
}
//find a linedef to align to
Vector2D hitpos = mode.GetHitPosition();
if (!hitpos.IsFinite())
{
return;
}
//align to line of highlighted sector, which is closest to hitpos
Sector highlightedSector = ((BaseVisualSector)mode.HighlightedObject).Sector;
List <Linedef> lines = new List <Linedef>();
foreach (Sidedef side in highlightedSector.Sidedefs)
{
lines.Add(side.Line);
}
Linedef targetLine = MapSet.NearestLinedef(lines, hitpos);
if (targetLine == null)
{
return;
}
bool isFront = targetLine.SideOfLine(hitpos) > 0;
Sector.Sector.Fields.BeforeFieldsChange();
//find an angle to rotate texture
float sourceAngle = (float)Math.Round(General.ClampAngle(isFront ? -Angle2D.RadToDeg(targetLine.Angle) + 90 : -Angle2D.RadToDeg(targetLine.Angle) - 90), 1);
if (!isFront)
{
sourceAngle = General.ClampAngle(sourceAngle + 180);
}
//update angle
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "rotationfloor" : "rotationceiling"), sourceAngle, 0f);
// Scale texture if it's a slope and the appropriate option is set
if (level.plane.Normal.z != 1.0f && BuilderPlug.Me.ScaleTexturesOnSlopes != 2)
{
Vector2D basescale = new Vector2D(1.0f, 1.0f);
// User wants to use the current scale as a base?
if (BuilderPlug.Me.ScaleTexturesOnSlopes == 1)
{
basescale.x = scaleX;
basescale.y = scaleY;
}
// Create a unit vector of the direction of the target line in 3D space
Vector3D targetlinevector = new Line3D(new Vector3D(targetLine.Start.Position, level.plane.GetZ(targetLine.Start.Position)), new Vector3D(targetLine.End.Position, level.plane.GetZ(targetLine.End.Position))).GetDelta().GetNormal();
// Get a perpendicular vector of the target line in 3D space. This is used to get the slope angle relative to the target line
Vector3D targetlineperpendicular = Vector3D.CrossProduct(targetlinevector, level.plane.Normal);
if (alignx)
{
scaleX = Math.Abs(basescale.x * (1.0f / (float)Math.Cos(targetlinevector.GetAngleZ())));
}
if (aligny)
{
scaleY = Math.Abs(basescale.y * (1.0f / (float)Math.Cos(targetlineperpendicular.GetAngleZ())));
}
}
//set scale
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "xscalefloor" : "xscaleceiling"), scaleX, 1.0f);
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "yscalefloor" : "yscaleceiling"), scaleY, 1.0f);
//update offset
float distToStart = Vector2D.Distance(hitpos, targetLine.Start.Position);
float distToEnd = Vector2D.Distance(hitpos, targetLine.End.Position);
Vector2D offset = (distToStart < distToEnd ? targetLine.Start.Position : targetLine.End.Position).GetRotated(Angle2D.DegToRad(sourceAngle));
if (alignx)
{
if (Texture != null && Texture.IsImageLoaded)
{
offset.x %= Texture.Width / scaleX;
}
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "xpanningfloor" : "xpanningceiling"), (float)Math.Round(-offset.x), 0f);
}
if (aligny)
{
if (Texture != null && Texture.IsImageLoaded)
{
offset.y %= Texture.Height / scaleY;
}
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "ypanningfloor" : "ypanningceiling"), (float)Math.Round(offset.y), 0f);
}
//update geometry
Sector.UpdateSectorGeometry(false);
}
// This (re)builds the visual sector, calculating all geometry from scratch
public void Rebuild()
{
// Forget old geometry
base.ClearGeometry();
// Get sector data
SectorData data = GetSectorData();
if (!data.Updated)
{
data.Update();
}
// Create floor
floor = (floor ?? new VisualFloor(mode, this));
if (floor.Setup(data.Floor, null))
{
AddGeometry(floor);
}
// Create ceiling
ceiling = (ceiling ?? new VisualCeiling(mode, this));
if (ceiling.Setup(data.Ceiling, null))
{
AddGeometry(ceiling);
}
// Create 3D floors
for (int i = 0; i < data.ExtraFloors.Count; i++)
{
Effect3DFloor ef = data.ExtraFloors[i];
bool floorRequired = ef.VavoomType; //mxd
bool ceilingRequired = ef.VavoomType; //mxd
if (ef.VavoomType || !ef.IgnoreBottomHeight)
{
//mxd. check if 3d floor is between real floor and ceiling
if (!ef.VavoomType)
{
if (ef.Ceiling.plane.GetInverted().Normal != floor.Level.plane.Normal ||
ef.Ceiling.plane.Normal != ceiling.Level.plane.Normal)
{
//mxd. check if at least one vertex of 3d floor is between floor and ceiling
floorRequired = Check3dFloorPlane(floor.Vertices, ceiling.Vertices, ef.Ceiling.plane);
}
//if floor, ceiling and 3d floor are not sloped, compare offsets
else if (-floor.Level.plane.Offset < ef.Ceiling.plane.Offset &&
ceiling.Level.plane.Offset > ef.Ceiling.plane.Offset)
{
floorRequired = true;
}
}
//mxd. Create a floor
if (floorRequired && ef.Ceiling.sector.IsDisposed == false)
{
VisualFloor vf = (i < extrafloors.Count) ? extrafloors[i] : new VisualFloor(mode, this);
if (vf.Setup(ef.Ceiling, ef))
{
base.AddGeometry(vf);
//mxd. add backside as well
if (!ef.VavoomType && ef.RenderInside)
{
VisualFloor vfb = (i < extrabackfloors.Count) ? extrabackfloors[i] : new VisualFloor(mode, this);
if (vfb.Setup(ef.Ceiling, ef, true))
{
base.AddGeometry(vfb);
}
if (i >= extrabackfloors.Count)
{
extrabackfloors.Add(vfb);
}
}
}
if (i >= extrafloors.Count)
{
extrafloors.Add(vf);
}
}
}
//mxd. check if 3d ceiling is between real floor and ceiling
if (!ef.VavoomType)
{
if (ef.Floor.plane.GetInverted().Normal != ceiling.Level.plane.Normal ||
ef.Floor.plane.Normal != floor.Level.plane.Normal)
{
//mxd. check if at least one vertex of 3d ceiling is between floor and ceiling
ceilingRequired = Check3dFloorPlane(floor.Vertices, ceiling.Vertices, ef.Floor.plane);
}
//if floor, ceiling and 3d ceiling are not sloped, compare offsets
else if (ceiling.Level.plane.Offset > -ef.Floor.plane.Offset &&
floor.Level.plane.Offset > ef.Floor.plane.Offset)
{
ceilingRequired = true;
}
}
//mxd. Create a ceiling
if (ceilingRequired && ef.Floor.sector.IsDisposed == false)
{
VisualCeiling vc = (i < extraceilings.Count) ? extraceilings[i] : new VisualCeiling(mode, this);
if (vc.Setup(ef.Floor, ef))
{
base.AddGeometry(vc);
//mxd. add backside as well
if (!ef.VavoomType && (ef.RenderInside || ef.IgnoreBottomHeight))
{
VisualCeiling vcb = (i < extrabackceilings.Count) ? extrabackceilings[i] : new VisualCeiling(mode, this);
if (vcb.Setup(ef.Floor, ef, true))
{
base.AddGeometry(vcb);
}
if (i >= extrabackceilings.Count)
{
extrabackceilings.Add(vcb);
}
}
}
if (i >= extraceilings.Count)
{
extraceilings.Add(vc);
}
}
}
// Go for all sidedefs
Dictionary <Sidedef, VisualSidedefParts> oldsides = sides ?? new Dictionary <Sidedef, VisualSidedefParts>(1);
sides = new Dictionary <Sidedef, VisualSidedefParts>(base.Sector.Sidedefs.Count);
foreach (Sidedef sd in base.Sector.Sidedefs)
{
// VisualSidedef already exists?
VisualSidedefParts parts = oldsides.ContainsKey(sd) ? oldsides[sd] : new VisualSidedefParts();
// Doublesided or singlesided?
if (sd.Other != null && sd.Line.IsFlagSet(General.Map.Config.DoubleSidedFlag))
{
// Create upper part
VisualUpper vu = parts.upper ?? new VisualUpper(mode, this, sd);
if (vu.Setup())
{
base.AddGeometry(vu);
}
// Create lower part
VisualLower vl = parts.lower ?? new VisualLower(mode, this, sd);
if (vl.Setup())
{
base.AddGeometry(vl);
}
// Create middle part
VisualMiddleDouble vm = parts.middledouble ?? new VisualMiddleDouble(mode, this, sd);
if (vm.Setup())
{
base.AddGeometry(vm);
}
//mxd. Create fog boundary
VisualFogBoundary vb = parts.fogboundary ?? new VisualFogBoundary(mode, this, sd);
if (vb.Setup())
{
vm.FogFactor = 0; // Avoid double-fogging the middle part
base.AddGeometry(vb);
}
// Create 3D wall parts
SectorData osd = mode.GetSectorData(sd.Other.Sector);
if (!osd.Updated)
{
osd.Update();
}
List <VisualMiddle3D> middles = parts.middle3d ?? new List <VisualMiddle3D>(osd.ExtraFloors.Count);
for (int i = 0; i < osd.ExtraFloors.Count; i++)
{
Effect3DFloor ef = osd.ExtraFloors[i];
if (!ef.VavoomType && ef.IgnoreBottomHeight)
{
continue; //mxd
}
VisualMiddle3D vm3 = (i < middles.Count) ? middles[i] : new VisualMiddle3D(mode, this, sd);
if (vm3.Setup(ef))
{
base.AddGeometry(vm3);
}
if (i >= middles.Count)
{
middles.Add(vm3);
}
}
//mxd. Create backsides
List <VisualMiddleBack> middlebacks = new List <VisualMiddleBack>();
for (int i = 0; i < data.ExtraFloors.Count; i++)
{
Effect3DFloor ef = data.ExtraFloors[i];
if (!ef.VavoomType && ef.RenderInside && !ef.IgnoreBottomHeight)
{
VisualMiddleBack vms = new VisualMiddleBack(mode, this, sd);
if (vms.Setup(ef))
{
base.AddGeometry(vms);
}
middlebacks.Add(vms);
}
}
// Store
sides.Add(sd, new VisualSidedefParts(vu, vl, vm, vb, middles, middlebacks));
}
else
{
// Create middle part
VisualMiddleSingle vm = parts.middlesingle ?? new VisualMiddleSingle(mode, this, sd);
if (vm.Setup())
{
base.AddGeometry(vm);
}
// Store
sides.Add(sd, new VisualSidedefParts(vm));
}
}
// Done
changed = false;
}
// This (re)builds the visual sector, calculating all geometry from scratch
public void Rebuild()
{
// Forget old geometry
base.ClearGeometry();
// Create floor
if (floor == null)
{
floor = new VisualFloor(mode, this);
}
floor.Setup();
base.AddGeometry(floor);
// Create ceiling
if (ceiling == null)
{
ceiling = new VisualCeiling(mode, this);
}
ceiling.Setup();
base.AddGeometry(ceiling);
// Go for all sidedefs
Dictionary <Sidedef, VisualSidedefParts> oldsides = sides ?? new Dictionary <Sidedef, VisualSidedefParts>(1);
sides = new Dictionary <Sidedef, VisualSidedefParts>(base.Sector.Sidedefs.Count);
foreach (Sidedef sd in base.Sector.Sidedefs)
{
// VisualSidedef already exists?
VisualSidedefParts parts = oldsides.ContainsKey(sd) ? oldsides[sd] : new VisualSidedefParts();
// Doublesided or singlesided?
if (sd.Other != null)
{
// Create upper part
VisualUpper vu = parts.upper ?? new VisualUpper(mode, this, sd);
vu.Setup();
base.AddGeometry(vu);
// Create lower part
VisualLower vl = parts.lower ?? new VisualLower(mode, this, sd);
vl.Setup();
base.AddGeometry(vl);
// Create middle part
VisualMiddleDouble vm = parts.middledouble ?? new VisualMiddleDouble(mode, this, sd);
vm.Setup();
base.AddGeometry(vm);
// Store
sides.Add(sd, new VisualSidedefParts(vu, vl, vm));
}
else
{
// Create middle part
VisualMiddleSingle vm = parts.middlesingle ?? new VisualMiddleSingle(mode, this, sd);
vm.Setup();
base.AddGeometry(vm);
// Store
sides.Add(sd, new VisualSidedefParts(vm));
}
}
// Done
changed = false;
}
