checkBegAndEndDesc(ObjectId idAlign, ref List <POI> varpoi)
{
Alignment objAlign = (Alignment)idAlign.getEnt();
double dblStaBeg = Math.roundDown3((objAlign.StartingStation));
double dblStaEnd = Math.roundDown3((objAlign.EndingStation));
POI vpoi = varpoi[0];
if (vpoi.Station == dblStaBeg)
{
vpoi.Desc0 = vpoi.Desc0.Replace("AP", "BEG");
vpoi.Desc0 = vpoi.Desc0.Replace("HC", "BEG");
vpoi.Desc0 = vpoi.Desc0.Replace("HE", "BEG");
vpoi.DescX = vpoi.Desc0;
varpoi[0] = vpoi;
}
int j = varpoi.Count - 1;
vpoi = varpoi[j];
if (vpoi.Station == dblStaEnd)
{
vpoi.Desc0 = vpoi.Desc0.Replace("AP", "END");
vpoi.Desc0 = vpoi.Desc0.Replace("HC", "END");
vpoi.Desc0 = vpoi.Desc0.Replace("HE", "END");
vpoi.DescX = vpoi.Desc0;
varpoi[j] = vpoi;
}
}
getPVI(ObjectId idAlign, double dblStation, ref List <POI> varpoi, double dblHeightCurb, ref bool boolNewPVI)
{
bool boolFound = false;
Profile objProfileFLOWLINE = Prof.getProfile(idAlign, "FLOWLINE");
Profile objProfileSTAKE = Prof.getProfile(idAlign, "STAKE");
ProfilePVICollection objProfilePVIs = objProfileSTAKE.PVIs;
double dblProfileElev = System.Math.Round(objProfileFLOWLINE.ElevationAt(dblStation) + dblHeightCurb / 12, 3);
for (int i = 0; i <= objProfilePVIs.Count - 1; i++)
{
ProfilePVI objProfilePVI = objProfilePVIs[i];
if (Math.roundDown1((objProfilePVI.Station)) == Math.roundDown1(dblStation))
{
objProfilePVI.Elevation = dblProfileElev;
boolFound = true;
break;
}
}
if (boolFound)
{
for (int k = 0; k < varpoi.Count; k++)
{
if (varpoi[k].Station == Math.roundDown3(dblStation))
{
check4GradeBreak(k, varpoi);
}
}
boolFound = false;
}
else
{
boolNewPVI = true;
ProfilePVI objProfilePVI = objProfilePVIs.AddPVI(dblStation, dblProfileElev);
varpoi.Add(new POI {
Station = Math.roundDown3(dblStation), Elevation = dblProfileElev, ClassObj = fStake.ClassObj
});
var sortSta = from p in varpoi
orderby p.Station
select p;
int j = 0;
foreach (var p in sortSta)
{
j += 1;
if (Math.roundDown3(dblStation) == p.Station)
{
check4GradeBreak(j, varpoi);
break;
}
}
}
}
getStationsOnTangent(ref int i, List <POI> varpoi, double dblInterval0, double dblTolerance)
{
bool boolAddRemain = false;
double dblDistance = (varpoi[i + 0].Station - varpoi[i - 1].Station);
int intSEGs = (int)System.Math.Truncate(dblDistance / dblInterval0);
if (dblDistance % dblInterval0 != 0)
{
if (dblDistance - (intSEGs * dblInterval0) < dblTolerance)
{
boolAddRemain = true;
}
else
{
boolAddRemain = false;
}
}
switch (intSEGs)
{
case 0:
break; //do nothing
case 1:
if (!boolAddRemain)
{
varpoi.Add(new POI {
Station = Math.roundDown3(varpoi[i - 1].Station + dblInterval0), Desc0 = "", ClassObj = fStake.ClassObj
});
}
break;
default:
varpoi.Add(new POI {
Station = Math.roundDown3(varpoi[i - 1].Station + dblInterval0), Desc0 = "", ClassObj = fStake.ClassObj
});
for (int j = 2; j < intSEGs; j++)
{
varpoi.Add(new POI {
Station = Math.roundDown3(varpoi[varpoi.Count - 1].Station + dblInterval0), Desc0 = "", ClassObj = fStake.ClassObj
});
}
if (!boolAddRemain) //if booAddRemain is true then skip adding last point
{
varpoi.Add(new POI {
Station = Math.roundDown3(varpoi[varpoi.Count - 1].Station + dblInterval0), Desc0 = "", ClassObj = fStake.ClassObj
});
}
break;
}
}
checkBegAndEndStations(ObjectId idAlign, ref List <POI> varpoi)
{
Alignment objAlign = (Alignment)idAlign.getEnt();
double dblStaBeg = Math.roundDown3((objAlign.StartingStation));
double dblStaEnd = Math.roundDown3((objAlign.EndingStation));
if (varpoi.Count == 0)
{
return;
}
double dblEasting = 0, dblNorthing = 0;
varpoi = varpoi.sortPOIbyStation();
int j = varpoi.Count - 1;
POI vpoi = varpoi[j];
if (vpoi.Station != dblStaEnd)
{
idAlign.getAlignPointLoc(dblStaEnd - 0.001, 0.0, ref dblEasting, ref dblNorthing);
vpoi.Station = Math.roundDown3(dblStaEnd);
vpoi.Desc0 = "END";
vpoi.ClassObj = fStake.ClassObj;
varpoi.Add(vpoi);
}
else
{
vpoi.DescX = "END";
varpoi[j] = vpoi;
}
if (System.Math.Round(varpoi[0].Station, 3) != dblStaBeg)
{
idAlign.getAlignPointLoc(dblStaBeg, 0.0, ref dblEasting, ref dblNorthing);
vpoi = new POI();
vpoi.Station = dblStaBeg;
vpoi.Desc0 = "BEG";
vpoi.ClassObj = fStake.ClassObj;
varpoi.Add(vpoi);
}
else
{
vpoi = varpoi[0];
vpoi.DescX = "BEG";
varpoi[0] = vpoi;
}
varpoi = varpoi.sortPOIbyStation();
}
getElev(Point3d pnt3dInt, ObjectId id3dBoundary)
{
double dblElev = 0;
List <Point3d> pnts3d = id3dBoundary.getCoordinates3dList();
for (int i = 0; i < pnts3d.Count; i++)
{
if (Math.roundDown2(pnt3dInt.X) == Math.roundDown2(pnts3d[i].X) &&
Math.roundDown2(pnt3dInt.Y) == Math.roundDown2(pnts3d[i].Y))
{
dblElev = pnts3d[i].Z;
break;
}
}
return(dblElev);
}
getCurbTransitions()
{
Alignment objAlign = fStake.ACTIVEALIGN;
ObjectId idAlign = objAlign.ObjectId;
if (idAlign == ObjectId.Null)
{
Point3d pnt3dPicked = Pub.pnt3dO;
string nameAlign = "";
idAlign = Align.selectAlign("\nSelect Curb Alignment: ", "\nAlignment selection failed.", out pnt3dPicked, out nameAlign);
objAlign = (Alignment)idAlign.getEnt();
}
ObjectId idTable = Stake_Table.getTableId(idAlign);
List <POI> varpoi = fStake.POI_CALC;
string strResponse = "";
bool escape = UserInput.getUserInput("\nEnter Curb Height in INCHES: ", out strResponse);
double dblHeightCurb = Double.Parse(strResponse);
Point3d varPntPick = Pub.pnt3dO;
PromptStatus ps;
double dblStation = 0, dblOffset = 0;
bool boolNewPVI = false;
do
{
try
{
varPntPick = UserInput.getPoint("\nSelect Location to Adjust: ", out ps, osMode: 8);
}
catch (System.Exception)
{
break;
}
objAlign.StationOffset(varPntPick.X, varPntPick.Y, ref dblStation, ref dblOffset);
getPVI(idAlign, Math.roundDown3(dblStation), ref varpoi, dblHeightCurb, ref boolNewPVI);
}while (true);
fStake.POI_CALC = varpoi;
if (boolNewPVI)
{
Stake_Table.updateTableData(idTable, varpoi);
}
}
getStationsOnTangentEVENS(ref int i, List <POI> varpoi, double dblInterval0, double dblTolerance)
{
double dblDistance = (varpoi[i + 0].Station - varpoi[i - 1].Station);
int j = 1;
int intervalX = 0;
do
{
if (dblDistance / j < dblInterval0 + dblTolerance)
{
intervalX = j;
break;
}
else
{
j += 1;
}
} while (true);
switch (intervalX)
{
case 0:
case 1:
break; //do nothing
default:
varpoi.Add(new POI {
Station = Math.roundDown3(varpoi[i - 1].Station + dblDistance / intervalX), Desc0 = "", ClassObj = fStake.ClassObj
});
for (j = 2; j <= intervalX - 1; j++)
{
varpoi.Add(new POI {
Station = Math.roundDown3(varpoi[varpoi.Count - 1].Station + dblDistance / intervalX), Desc0 = "", ClassObj = fStake.ClassObj
});
}
break;
}
}
getBldgElev(ObjectId idAlign, ref List <POI> varpoi)
{
ResultBuffer rb = idAlign.getXData("BLDG");
if (rb == null)
{
return;
}
TypedValue[] tvs = rb.AsArray();
Point3d pnt3dCen = new Point3d(double.Parse(tvs[1].Value.ToString()),
double.Parse(tvs[2].Value.ToString()),
double.Parse(tvs[3].Value.ToString()));
double dblAngTar = double.Parse(tvs[4].Value.ToString());
double dblSlope = double.Parse(tvs[5].Value.ToString());
Point3d pnt3dTar = pnt3dCen.traverse(dblAngTar, 100, dblSlope);
Debug.Print("BEGIN GET BLDG ELEV");
double dblEasting = 0, dblNorthing = 0;
Alignment objAlign = (Alignment)idAlign.getEnt();
for (int i = 0; i < varpoi.Count; i++)
{
objAlign.PointLocation(varpoi[i].Station, varpoi[i].OFFSET, ref dblEasting, ref dblNorthing);
Point3d pnt3dX = new Point3d(dblEasting, dblNorthing, 0);
double elev = pnt3dTar.Z + Geom.getCosineComponent(pnt3dCen, pnt3dTar, pnt3dX) * (dblSlope * -1);
pnt3dX = pnt3dX.addElevation(elev);
POI vpoi = varpoi[i];
vpoi.Elevation = Math.roundDown2(pnt3dX.Z);
varpoi[i] = vpoi;
Debug.Print(varpoi[i].Station + " " + varpoi[i].Elevation + " " + varpoi[i].Desc0);
}
Debug.Print("END GET BLDG ELEV");
}
getSurfaceElev(double dblX, double dblY, TinSurface objSurface)
{
double dblElev = 0;
double dblXX = 0;
double dblYY = 0;
dblElev = objSurface.FindElevationAtXY(dblX, dblY);
if (dblElev > 0)
{
dblXX = Math.roundDown2(dblX);
dblYY = Math.roundDown2(dblY);
dblElev = objSurface.FindElevationAtXY(dblXX, dblYY);
}
if (dblElev < 0)
{
dblXX = Math.roundUP2(dblX);
dblYY = Math.roundUP2(dblY);
dblElev = objSurface.FindElevationAtXY(dblXX, dblYY);
}
return(dblElev);
}
resolveDuplicateStationsGrid(List <POI> varpoi)
{
//BEGIN RESOLVE DUPLICATE STATIONS GRID
List <POI> varPOI_LIM = new List <POI>();
List <POI> varPOI_IN = new List <POI>();
int k = -1;
for (int i = 0; i < varpoi.Count; i++)
{
if (varpoi[i].OFFSET == 0)
{
varPOI_LIM.Add(varpoi[i]);
}
else
{
varPOI_IN.Add(varpoi[i]);
k++;
}
}
Debug.Print("BEGIN RESOLVE DUPLICATE STATIONS GRID");
int j = -1;
List <POI> varPOI_Temp = new List <POI>();
varPOI_Temp.Add(varPOI_LIM[0]);
j++;
Debug.Print("0" + " " + varPOI_Temp[0].Station + " " + varPOI_Temp[0].Elevation + " " + varPOI_Temp[0].Desc0 + " " + varPOI_Temp[0].DescX);
for (int i = 1; i < varPOI_LIM.Count; i++)
{
if (System.Math.Abs(Math.roundDown2(varPOI_LIM[i - 1].Station) - Math.roundDown2(varPOI_LIM[i - 0].Station)) > 0.1)
{
varPOI_Temp.Add(varPOI_LIM[i - 0]);
j++;
}
else if (varPOI_LIM[i - 1].Desc0.Substring(0, 2) == "AP")
{
varPOI_LIM[i - 1].DescX = varPOI_LIM[i - 0].DescX;
varPOI_Temp[j] = varPOI_LIM[i - 1];
}
else if (varPOI_LIM[i - 0].Desc0.Substring(0, 2) == "AP")
{
varPOI_LIM[i - 0].DescX = varPOI_LIM[i - 1].DescX;
varPOI_Temp[j] = varPOI_LIM[i - 0];
}
Debug.Print(j + " " + varPOI_Temp[j].Station + " " + varPOI_Temp[j].Elevation + " " + varPOI_Temp[j].Desc0 + " " + varPOI_Temp[j].DescX);
}
varPOI_Temp[j].DescX = varPOI_Temp[0].DescX;
varpoi = new List <POI>();
for (int i = 0; i <= j; i++)
{
varpoi.Add(varPOI_Temp[i]);
}
for (int i = j + 1; i <= j + k + 1; i++)
{
varpoi[i] = varPOI_IN[i - j - 1];
}
Debug.Print("END RESOLVE DUPLICATE STATIONS GRID");
//END RESOLVE DUPLICATE STATIONS GRID
}
resolveDuplicateStations(ref List <POI> varpoi)
{
var sortSta = from p in varpoi
orderby p.Station ascending
select p;
List <POI> poiTmp = new List <POI>();
foreach (var p in sortSta)
{
poiTmp.Add(p);
}
varpoi = poiTmp;
//BEGIN RESOLVE DUPLICATE STATIONS
Debug.Print("BEGIN RESOLVE DUPLICATE STATIONS");
int j = -1;
List <POI> varPOI_Temp = new List <POI>();
varPOI_Temp.Add(varpoi[0]);
j++;
Debug.Print("0" + " " + varpoi[0].Station + " " + varpoi[0].Elevation + " " + varpoi[0].Desc0 + " " + varpoi[0].DescX);
string strDesc = ""; int intLen = 0;
for (int i = 1; i < varpoi.Count; i++)
{
if (System.Math.Abs(Math.roundDown2(varpoi[i - 1].Station) - Math.roundDown2(varpoi[i - 0].Station)) > 0.1)
{
if (varpoi[i - 0].Desc0.Substring(0, 2) != "HE")
{
string descx = string.Format("{0} {1}", varpoi[i - 0].Desc0, varpoi[i - 0].DescX.Replace("HC", "").Trim());
varpoi[i - 0].DescX = descx;
}
varPOI_Temp.Add(varpoi[i - 0]);
j++;
}
else
{
switch (varpoi[i - 1].Desc0.Substring(0, 2)) //(i-1) PREVIOUS
{
case "AP": //(i-1) PREVIOUS
switch (varpoi[i - 0].Desc0)
{
case "TEE": //(i-0) CURRENT
varpoi[i - 1].DescX = "AP/TEE";
varPOI_Temp[j] = varpoi[i - 1];
break;
case "BEG":
case "END": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "GB":
case "GB LP":
case "GB HP": //(i-0) CURRENT
//CHECK NEXT
varpoi[i - 0].DescX = varpoi[i - 1].Desc0 + " " + varpoi[i - 0].Desc0;
varpoi[i - 0].Desc0 = varpoi[i - 1].Desc0;
varpoi[i - 0].AngDelta = varpoi[i - 1].AngDelta;
varpoi[i - 0].AngDir = varpoi[i - 1].AngDir;
varpoi[i - 0].isRightHand = varpoi[i - 1].isRightHand;
varPOI_Temp[j] = varpoi[i - 0];
break;
}
break;
case "BE": //BEG '(i-1) PREVIOUS
switch (varpoi[i - 0].Desc0)
{
case "TEE": //(i-0) CURRENT
varpoi[i - 0].DescX = "BEG/TEE";
varpoi[i - 0].isClosed = varpoi[i - 1].isClosed;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "GB":
case "GB LP":
case "GB HP": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 1].Desc0 + " " + varpoi[i - 0].Desc0;
varpoi[i - 0].isClosed = varpoi[i - 1].isClosed;
varPOI_Temp[j] = varpoi[i - 0];
break;
}
break;
case "BC": //(i-1) PREVIOUS
switch (varpoi[i - 0].Desc0)
{
case "GB":
case "GB LP":
case "GB HP": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 1].Desc0 + " " + varpoi[i - 0].Desc0;
varpoi[i - 0].Desc0 = varpoi[i - 1].Desc0;
varpoi[i - 0].Radius = varpoi[i - 1].Radius;
varpoi[i - 0].CenterPnt = varpoi[i - 1].CenterPnt;
varPOI_Temp[j] = varpoi[i - 0];
break;
}
break;
case "EC": //(i-1) PREVIOUS
switch (varpoi[i - 0].Desc0)
{
case "GB":
case "GB LP":
case "GB HP": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 1].Desc0 + " " + varpoi[i - 0].Desc0;
varpoi[i - 0].Desc0 = varpoi[i - 1].Desc0;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "BC": //(i-0) CURRENT
switch (varpoi[i - 1].isRightHand)
{
case true:
switch (varpoi[i - 0].isRightHand)
{
case true:
strDesc = varpoi[i - 1].DescX;
intLen = strDesc.Length;
varpoi[i - 0].DescX = strDesc.Substring(0, intLen - 2) + "/PCC";
break;
case false:
strDesc = varpoi[i - 1].DescX;
intLen = strDesc.Length;
varpoi[i - 0].DescX = strDesc.Substring(0, intLen - 2) + "/PRC";
break;
}
break;
case false:
switch (varpoi[i - 0].isRightHand)
{
case true:
strDesc = varpoi[i - 1].DescX;
intLen = strDesc.Length;
varpoi[i - 0].DescX = strDesc.Substring(0, intLen - 2) + "/PRC";
break;
case false:
strDesc = varpoi[i - 1].DescX;
intLen = strDesc.Length;
varpoi[i - 0].DescX = strDesc.Substring(0, intLen - 2) + " PCC";
break;
}
break;
}
varPOI_Temp[j] = varpoi[i - 0];
break;
}
break;
case "GB": //(i-1) PREVIOUS "GB LP", "GB HP" is covered
switch (varpoi[i - 0].Desc0)
{
case "BC":
varpoi[i - 1].DescX = varpoi[i - 0].Desc0 + " " + varpoi[i - 1].Desc0;
varpoi[i - 1].Desc0 = varpoi[i - 0].Desc0;
varpoi[i - 1].Radius = varpoi[i - 0].Radius;
varpoi[i - 1].isRightHand = varpoi[i - 0].isRightHand;
varpoi[i - 1].CenterPnt = varpoi[i - 0].CenterPnt;
varPOI_Temp[j] = varpoi[i - 1];
break;
case "EC": //(i-0) CURRENT
varpoi[i - 1].DescX = varpoi[i - 0].Desc0 + " " + varpoi[i - 1].Desc0;
varpoi[i - 1].Desc0 = varpoi[i - 0].Desc0;
varPOI_Temp[j] = varpoi[i - 1];
break;
case "AP": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0 + " " + varpoi[i - 1].Desc0;
varPOI_Temp[j] = varpoi[i - 0];
break;
}
break;
case "HC": //(i-1) PREVIOUS HORIZONTAL CONTROL
switch (varpoi[i - 0].Desc0)
{
case "AP": //(i-0) CURRENT
string descX = string.Format("{0} {1}", varpoi[i - 0].Desc0, varpoi[i - 1].DescX.Replace("HC", "").Trim());
varpoi[i - 0].DescX = descX;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "BEG":
case "END": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varpoi[i - 0].isClosed = varpoi[i - 1].isClosed;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "BC":
case "EC": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varpoi[i - 0].isClosed = varpoi[i - 1].isClosed;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "GB":
case "GB LP":
case "GB HP": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varpoi[i - 0].isClosed = varpoi[i - 1].isClosed;
varPOI_Temp[j] = varpoi[i - 0];
break;
}
break;
case "HE":
case "H0": //(i-1) PREVIOUS HORIZONTAL CONTROL WITH INTERPOLATED ELEVATION
switch (varpoi[i - 0].Desc0)
{
case "AP": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "BEG":
case "END": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varpoi[i - 0].isClosed = varpoi[i - 1].isClosed;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "BC":
case "EC": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0 + " " + varpoi[i - 1].DescX.Replace("HE", "").Trim();
varpoi[i - 0].isClosed = varpoi[i - 1].isClosed;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "GB":
case "GB LP":
case "GB HP": //(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varpoi[i - 0].isClosed = varpoi[i - 1].isClosed;
varPOI_Temp[j] = varpoi[i - 0];
break;
}
break;
case "TE":
//(i-1) PREVIOUS TEE
switch (varpoi[i - 0].Desc0)
{
case "AP":
//(i-0) CURRENT
varpoi[i - 0].DescX = "AP/TEE";
varPOI_Temp[j] = varpoi[i - 0];
break;
case "BEG":
case "END":
//(i-0) CURRENT
varpoi[i - 0].DescX = varpoi[i - 0].Desc0 + "/TEE";
varPOI_Temp[j] = varpoi[i - 0];
break;
}
break;
default:
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varPOI_Temp[j] = varpoi[i - 0];
break;
}
}
Debug.Print(j + " " + varPOI_Temp[j].Station + " " + varPOI_Temp[j].Elevation + " " + varPOI_Temp[j].Desc0 + " " + varPOI_Temp[j].DescX);
}
varpoi = varPOI_Temp;
Debug.Print("END RESOLVE DUPLICATE STATIONS");
//END RESOLVE DUPLICATE STATIONS
}
resolveDuplicateStationsWall(ref List <POI> varpoi)
{
List <POI> varPOI_IN = null;
//BEGIN RESOLVE DUPLICATE STATIONS WALL
int j = -1;
List <POI> varPOI_Temp = null;
varPOI_Temp.Add(varpoi[0]);
j++;
int k = -1;
Debug.Print("BEGIN RESOLVE DUPLICATE STATIONS WALL");
Debug.Print("0" + " " + varpoi[0].Station + " " + varpoi[0].Elevation + " " + varpoi[0].Desc0 + " " + varpoi[0].DescX);
for (int i = 1; i < varpoi.Count; i++)
{
if (System.Math.Abs(Math.roundDown2(varpoi[i - 1].Station) - Math.roundDown2(varpoi[i - 0].Station)) > 0.1)
{
varPOI_Temp.Add(varpoi[i - 0]);
j++;
}
else
{
string strDescPrev = varpoi[i - 1].Desc0.Substring(0, 2);
string strDescCurr = varpoi[i - 0].Desc0.Substring(0, 2);
switch (strDescPrev)
{
case "HC":
switch (strDescCurr)
{
case "BE":
case "EN":
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varPOI_Temp[j] = varpoi[i - 0];
break;
case "AP":
varpoi[i - 0].DescX = varpoi[i - 1].DescX;
varPOI_Temp[j] = varpoi[i - 0];
break;
default:
varpoi[i - 0].DescX = varpoi[i - 0].Desc0;
varPOI_Temp[j] = varpoi[i - 0];
break;
}
break;
case "AP":
switch (strDescCurr)
{
case "TOF":
varpoi[i - 1].DescX = varpoi[i - 1].Desc0 + " " + varpoi[i - 0].Desc0;
varpoi[i - 1].Elevation = varpoi[i - 0].Elevation;
varPOI_Temp[j] = varpoi[i - 1];
break;
case "TOW":
varpoi[i - 1].DescX = varpoi[i - 0].DescX;
varPOI_Temp[j] = varpoi[i - 1];
break;
}
break;
case "TOF":
switch (strDescCurr)
{
case "AP":
varpoi[i - 1].DescX = varpoi[i - 0].DescX;
varPOI_Temp[j] = varpoi[i - 1];
break;
case "TOW":
varpoi[i - 1].DescX = varpoi[i - 0].DescX;
varPOI_Temp[j] = varpoi[i - 1];
break;
}
break;
case "TOW":
switch (strDescCurr)
{
case "AP":
varpoi[i - 1].DescX = varpoi[i - 0].DescX;
varPOI_Temp[j] = varpoi[i - 1];
break;
case "TOF":
varpoi[i - 1].DescX = varpoi[i - 0].DescX;
varPOI_Temp[j] = varpoi[i - 1];
break;
}
break;
}
Debug.Print(j + " " + varPOI_Temp[j].Station + " " + varPOI_Temp[j].Elevation + " " + varPOI_Temp[j].Desc0 + " " + varPOI_Temp[j].DescX);
}
}
varPOI_Temp[j].DescX = varPOI_Temp[0].DescX;
varpoi = new List <POI>();
for (int i = 0; i <= j; i++)
{
varpoi.Add(varPOI_Temp[i]);
}
for (int i = j + 1; i <= j + k + 1; i++)
{
varpoi.Add(varPOI_IN[i - j - 1]);
}
Debug.Print("END RESOLVE DUPLICATE STATIONS WALL");
//END RESOLVE DUPLICATE STATIONS WALL
}
getBC_EC(ObjectId idAlign, ref List <POI> varpoi)
{
bool boolExists = false;
Profile objProfile = null;
Alignment objAlign = (Alignment)idAlign.getEnt();
try
{
objProfile = Prof.getProfile(idAlign, "FLOWLINE");
}
catch (System.Exception)
{
objProfile = Prof.getProfile(idAlign, "STAKE");
}
string strClass = fStake.ClassObj;
AlignmentEntityCollection objAlignEnts = objAlign.Entities;
bool isRightHand = false;
if (objAlignEnts.Count > 1)
{
for (int i = 0; i < objAlignEnts.Count; i++)
{
AlignmentEntity objAlignEnt = objAlignEnts[i];
if (objAlignEnt.EntityType == AlignmentEntityType.Arc)
{
boolExists = false;
AlignmentArc objAlignEntArc = (AlignmentArc)objAlignEnt;
isRightHand = !(objAlignEntArc.Clockwise);
double dblStationBC = System.Math.Round(objAlignEntArc.StartStation, 3);
int x = 0;
for (int j = 0; j < varpoi.Count; j++)
{
if (System.Math.Abs(varpoi[j].Station - dblStationBC) < 0.05)
{
boolExists = true;
x = j;
break;
}
}
double dblBulge = 0;
double dblAngDirCen = objAlignEntArc.StartPoint.getDirection(objAlignEntArc.CenterPoint);//direction to center of arc
double dblAngDelta = objAlignEntArc.Delta;
double dblRadius = System.Math.Round(objAlignEntArc.Radius, 2);
Point2d dblPntCen = objAlignEntArc.CenterPoint;
if (boolExists)
{
dblBulge = System.Math.Tan(objAlignEntArc.Delta / 4);
if (objAlignEntArc.Clockwise)
{
dblBulge = dblBulge * -1.0;
}
POI vpoi = varpoi[x];
vpoi.Station = Math.roundDown3(dblStationBC);
if (vpoi.Desc0 == "EC")
{
vpoi.Desc0 = "PCC";
}
else
{
vpoi.Desc0 = "BC";
}
vpoi.AngDir = dblAngDirCen;
vpoi.isRightHand = isRightHand;
vpoi.Bulge = dblBulge;
vpoi.Radius = dblRadius;
vpoi.CenterPnt = new Point3d(dblPntCen.X, dblPntCen.Y, 0);
varpoi[x] = vpoi;
}
else
{
string strDesc = "BC";
double dblElev = 0;
try
{
dblElev = objProfile.ElevationAt(dblStationBC);
}
catch (System.Exception)
{
try
{
dblElev = objProfile.ElevationAt(dblStationBC + 0.05);
}
catch (System.Exception)
{
idAlign.delete();
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog(string.Format("Design Point not found at beginning of Arc @ {0:###+00.00} - revise and retry - exiting", dblStationBC));
return(false);
}
}
if (dblElev != 0)
{
dblBulge = System.Math.Tan(objAlignEntArc.Delta / 4);
if (objAlignEntArc.Clockwise)
{
dblBulge = dblBulge * -1.0;
}
dblRadius = System.Math.Round(objAlignEntArc.Radius, 2);
POI vpoi = new POI();
vpoi.Station = dblStationBC;
vpoi.Desc0 = strDesc;
vpoi.ClassObj = strClass;
vpoi.AngDelta = dblAngDelta;
vpoi.AngDir = dblAngDirCen;
vpoi.isRightHand = isRightHand;
vpoi.Elevation = dblElev;
vpoi.Bulge = dblBulge;
vpoi.Radius = dblRadius;
vpoi.CenterPnt = new Point3d(dblPntCen.X, dblPntCen.Y, 0);
varpoi.Add(vpoi);
varpoi = varpoi.sortPOIbyStation();
}
}
boolExists = false;
double dblStationEC = System.Math.Round(objAlignEntArc.EndStation, 3);
x = 0;
for (int j = 0; j < varpoi.Count; j++)
{
if (System.Math.Abs(varpoi[j].Station - dblStationEC) < 0.05)
{
boolExists = true;
x = j;
break;
}
}
dblAngDirCen = objAlignEntArc.EndPoint.getDirection(objAlignEntArc.CenterPoint);
if (boolExists)
{
POI vpoi = varpoi[x];
vpoi.Station = Math.roundDown3(dblStationEC);
vpoi.Desc0 = "EC";
vpoi.AngDir = dblAngDirCen;
vpoi.isRightHand = isRightHand;
vpoi.Bulge = dblBulge;
vpoi.Radius = dblRadius;
varpoi[x] = vpoi;
}
else
{
string strDesc = "EC";
double dblElev = 0;
try
{
dblElev = objProfile.ElevationAt(dblStationEC);
}
catch (System.Exception)
{
dblElev = objProfile.ElevationAt(dblStationBC - 0.05);
}
POI vpoi = new POI();
vpoi.Station = dblStationEC;
vpoi.Desc0 = strDesc;
vpoi.ClassObj = strClass;
vpoi.AngDelta = dblAngDelta;
vpoi.AngDir = dblAngDirCen;
vpoi.isRightHand = isRightHand;
vpoi.Elevation = dblElev;
vpoi.Bulge = dblBulge;
vpoi.Radius = dblRadius;
varpoi.Add(vpoi);
varpoi = varpoi.sortPOIbyStation();
}
}
}
}
return(true);
}
syncTableWithProfile()
{
List <POI> varPOIcur = fStake.POI_CALC;
Alignment objAlign = fStake.ACTIVEALIGN;
ObjectId idAlign = objAlign.ObjectId;
ResultBuffer rb = idAlign.getXData("CLASS");
if (rb == null)
{
return;
}
TypedValue[] tvs = rb.AsArray();
fStake.ClassObj = tvs[1].Value.ToString();
Profile objProfile = null;
try
{
objProfile = Prof.getProfile(idAlign, "STAKE");
}
catch (System.Exception)
{
}
ProfilePVICollection objProfilePVIs = objProfile.PVIs;
Table objTable = null;
ObjectId idTable = ObjectId.Null;
try
{
idTable = Stake_Table.getTableId(idAlign);
}
catch (System.Exception)
{
try
{
SelectionSet ss = Select.buildSSet(typeof(Table));
ObjectId[] ids = ss.GetObjectIds();
if (ids.Length > 0)
{
for (int i = 0; i < ids.Length; i++)
{
idTable = ids[i];
objTable = (Table)idTable.getEnt();
if (objTable.Cells[1, 1].TextString == objAlign.Name)
{
break;
}
}
}
}
catch (System.Exception)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Select Table Failed");
return;
}
}
fStake.POI_CALC = resetPOI(idTable);
List <POI> varPOITmp = fStake.POI_CALC;
List <POI> varpoi = new List <POI>();
List <POI> varpoiAdd = new List <POI>();
Debug.Print(varPOITmp.Count.ToString());
ProfilePVI objProfilePVI = null;
for (int i = 0; i < varPOITmp.Count; i++)
{
for (int j = 0; j < objProfilePVIs.Count; j++)
{
objProfilePVI = objProfilePVIs[j];
if (Math.roundDown2((objProfilePVI.Station)) == Math.roundDown2(varPOITmp[i].Station))
{
varpoi.Add(varPOITmp[i]);
break;
}
}
}
bool boolExists = false;
for (int i = 0; i < objProfilePVIs.Count; i++)
{
boolExists = false;
objProfilePVI = objProfilePVIs[i];
for (int j = 0; j < varpoi.Count; j++)
{
if (Math.roundDown2(varpoi[j].Station) == Math.roundDown2((objProfilePVI.Station)))
{
boolExists = true;
break;
}
}
if (!boolExists)
{
POI vpoi = new POI();
vpoi.Station = Math.roundDown3((objProfilePVI.Station));
vpoi.Elevation = objProfilePVI.Elevation;
vpoi.ClassObj = fStake.ClassObj;
vpoi.Desc0 = "GB";
varpoiAdd.Add(vpoi);
}
}
if (varpoiAdd[0].Desc0 != "NOTHING")
{
for (int i = 0; i < varpoiAdd.Count; i++)
{
varpoi.Add(varpoiAdd[i]);
}
}
var sortSta = from p in varpoi
orderby p.Station ascending
select p;
List <POI> poiTmp = new List <POI>();
foreach (var p in sortSta)
{
poiTmp.Add(p);
}
varpoi = poiTmp;
updateTableData(idTable, varpoi);
fStake.POI_CALC = varpoi;
}
setOffsetPoint(Point3d pnt3dX, string strOffset, string strName, string strDesc, ObjectId idAlign, double dblStation, object varXAlignDesc = null)
{
string nameAlign = Align.getAlignName(idAlign);
Debug.Print(dblStation + " setOffsetPoint - Station In");
double dblElevCPNT = 0;
double dblElevSTAKE = 0;
int intCurbHeight = 0;
string strLayer = fStake.STAKE_LAYER;
string descCgPnt = "";
double offset = double.Parse(strOffset) * fStake.Side;
TypedValue[] tvs = new TypedValue[4];
tvs.SetValue(new TypedValue(1001, "STAKE"), 0);
tvs.SetValue(new TypedValue(1005, idAlign.getHandle()), 1);
tvs.SetValue(new TypedValue(1004, dblStation), 2);
tvs.SetValue(new TypedValue(1040, offset), 3);
pnt3dX = pnt3dX.addElevation(System.Math.Round(pnt3dX.Z, 3));
//uint pntNum = 0;
//ObjectId idCgPnt = pnt3dX.setPoint(out pntNum, "SPNT");
//CogoPoint cgPnt = (CogoPoint)idCgPnt.getEnt();
POI varPoi = new POI();
varPoi.Station = dblStation;
varPoi.Elevation = pnt3dX.Z;
//varPoi.PntNum = cgPnt .PointNumber.ToString();
if (varPoi.Elevation == 0)
{
if (fStake.ClassObj != "WALL")
{
varPoi.Elevation = System.Math.Round(Prof.getProfileElev(idAlign, "CPNT", dblStation), 3);
varPoi.PntNum = varPoi.PntNum + " RP";
}
}
//fStake.POI_STAKED.Add(varPoi);
string strFS = "";
switch (fStake.ClassObj)
{
case "CURB":
strFS = " TC";
dblElevCPNT = Prof.getProfileElev(idAlign, "FLOWLINE", dblStation);
dblElevSTAKE = Prof.getProfileElev(idAlign, "STAKE", dblStation);
intCurbHeight = Convert.ToInt32((Math.roundUP3(dblElevSTAKE - dblElevCPNT) * 12));
ASCIIEncoding ascii = new ASCIIEncoding();
strName = string.Format("{0}{1}{2}{3}", intCurbHeight, ascii.GetString((new Byte[] { 34 })), ascii.GetString((new Byte[] { 32 })), strName);
break;
case "WTR":
strFS = " FS";
break;
case "ALIGN":
switch (strDesc)
{
case "TG":
strFS = "";
break;
case "HC":
case "HE":
case "H0":
strDesc = "";
strFS = " INV";
break;
default:
strFS = " INV";
break;
}
break;
case "FL":
strFS = " FS";
break;
case "BLDG":
if (fGrid.optPBC.Checked)
{
strFS = " FF";
}
else if (fGrid.optRBC.Checked)
{
strFS = " PAD";
}
strLayer = string.Format("{0}-OS-{1}", fGrid.tbxOffsetH.Text, nameAlign);
Alignment objAlign = (Alignment)idAlign.getEnt();
double easting = 0, northing = 0;
idAlign.getAlignPointLoc(dblStation, 0.0, ref easting, ref northing);
Point3d pnt3d0 = new Point3d(easting, northing, 0);
ObjectId idLine = Draw.addLine(pnt3d0, pnt3dX, strLayer, 9);
break;
}
if ((varXAlignDesc == null))
{
if (strDesc.Substring(0, 2) == "RP")
{
descCgPnt = string.Format("{0} {1}", strName, strDesc);
if (fStake.optYes.Checked)
{
descCgPnt = string.Format("{0} {1} {2}", strName, strDesc, string.Format("{0:###+00.00}", varPoi.Station));
descCgPnt = descCgPnt.Replace(" ", " ");
}
}
else
{
if (fStake.ClassObj == "BLDG")
{
descCgPnt = string.Format("{0}'O/S {1} {2}", strOffset, strName, string.Format("{0} {1}", strDesc, strFS).Trim());
descCgPnt = descCgPnt.Replace(" ", " ");
}
else
{
descCgPnt = string.Format("{0}'O/S {1}@{2}", strOffset, strName, string.Format("{0} {1}", strDesc, strFS).Trim());
descCgPnt = descCgPnt.Replace(" ", " ");
if (fStake.optYes.Checked)
{
descCgPnt = string.Format("{0}'O/S {1}@{2} {3}", strOffset, strName, string.Format("{0} {1}", strDesc, strFS).Trim(), string.Format("{0:###+00.00}", varPoi.Station));
descCgPnt = descCgPnt.Replace(" ", " ");
}
}
}
}
else
{
descCgPnt = string.Format("{0}'O/S {1}@{2}", strOffset, strName, string.Format("{0} {1}", strDesc, varXAlignDesc).Trim());
descCgPnt = descCgPnt.Replace(" ", " ");
}
uint pntNum = 0;
ObjectId idCgPnt = pnt3dX.setPoint("SPNT");
using (Transaction tr = BaseObjs.startTransactionDb())
{
CogoPoint CgPnt = (CogoPoint)tr.GetObject(idCgPnt, OpenMode.ForWrite);
CgPnt.LabelStyleId = Pnt_Style.getPntLabelStyle("SPNT");
CgPnt.RawDescription = descCgPnt;
pntNum = fStake.NextPntNum;
CgPnt.PointNumber = pntNum;
fStake.NextPntNum++;
CgPnt.PointName = string.Format("SPNT{0}", pntNum);
tr.Commit();
}
varPoi.PntNum = pntNum.ToString();
fStake.POI_STAKED.Add(varPoi);
Debug.Print(varPoi.Station + " setOffsetPoint");
idCgPnt.setXData(tvs, "STAKE");
}
stakePoints(object varStaBeg = null, object varStaEnd = null, object varSide = null, object varBegNum = null)
{
string strClass = fStake.ClassObj;
Alignment objAlign = null;
try
{
objAlign = fStake.ACTIVEALIGN;
}
catch (System.Exception)
{
if (Stake_Algn.selectAlignment(ObjectId.Null))
{
objAlign = fStake.ACTIVEALIGN;
}
else
{
return;
}
}
ObjectId idAlign = objAlign.ObjectId;
fStake.STAKE_LAYER = fStake.cboOffset.Text + "-OS-" + objAlign.Name;
ObjectId idTable = Stake_Table.getTableId(idAlign);
List <POI> varpoi = Stake_Table.resetPOI(idTable);
fStake.POI_CALC = varpoi;
fStake.objectID = objAlign.ObjectId;
int intSide = 0;
double dblStation = 0, dblOffset = 0;
if ((varSide == null))
{
if (double.Parse(fStake.cboOffset.Text) != 0)
{
PromptStatus ps;
Point3d varPntPick = Pub.pnt3dO;
try
{
varPntPick = UserInput.getPoint("\nSelect side to place stake points: <ESC to Cancel>", out ps, osMode: 0);
}
catch (System.Exception)
{
return;
;
}
idAlign.getAlignStaOffset(varPntPick, ref dblStation, ref dblOffset);
if (System.Math.Abs(dblOffset) > 10.0)
{
string message = string.Format("Point selected is more than 10' from Alignment: {0} Continue", objAlign.Name);
DialogResult varResponse = MessageBox.Show(message, "Confirm stakng target.", MessageBoxButtons.YesNo);
if (varResponse == DialogResult.No)
{
return;
}
else
{
if (dblOffset < 0)
{
intSide = -1;
}
else
{
intSide = 1;
}
fStake.Side = intSide;
}
}
else
{
if (dblOffset < 0)
{
intSide = -1;
}
else
{
intSide = 1;
}
fStake.Side = intSide;
}
}
else
{
fStake.Side = 1;
}
}
else
{
intSide = int.Parse(varSide.ToString());
}
dblOffset = double.Parse(fStake.cboOffset.Text);
string strName = fStake.NameStakeObject;
var sortSta = from p in varpoi //sort stations
orderby p.Station ascending
select p;
List <POI> poiTmp = new List <POI>();
foreach (var p in sortSta)
{
poiTmp.Add(p);
}
varpoi = poiTmp;
double dblStaBeg = Math.roundDown3((objAlign.StartingStation));
double dblStaEnd = Math.roundDown3((objAlign.EndingStation));
List <POI> varPOI_TOF = null;
List <POI> varPOI_TOW = null;
Profile objProfile = null;
switch (strClass)
{
case "WTR":
objProfile = Prof.getProfile(idAlign, "CPNT");
break;
case "WALL":
for (int i = 0; i < varpoi.Count; i++)
{
if (varpoi[i].Desc0 == "TOF")
{
varPOI_TOF.Add(varpoi[i]);
}
else if (varpoi[i].Desc0 == "TOW")
{
varPOI_TOW.Add(varpoi[i]);
}
}
break;
default:
objProfile = Prof.getProfile(idAlign, "STAKE");
break;
}
List <POI> varPOI_TMP = new List <POI>();
if (strClass == "WALL")
{
Stake_GetStationing.getStationing(ref varPOI_TOF, dblStaBeg, dblStaEnd);
Stake_GetStationing.getStationing(ref varPOI_TOW, dblStaBeg, dblStaEnd);
for (int i = 0; i < varPOI_TOF.Count; i++)
{
varPOI_TMP.Add(varPOI_TOF[i]);
}
for (int j = 0; j < varPOI_TOW.Count; j++)
{
varPOI_TMP.Add(varPOI_TOW[j]);
}
varpoi = varPOI_TMP;
}
else
{
Stake_GetCardinals.checkBegAndEndDesc(idAlign, ref varpoi);
Stake_GetStationing.getStationing(ref varpoi, dblStaBeg, dblStaEnd);
}
poiTmp = new List <POI>();
foreach (var p in sortSta) //sort stations
{
poiTmp.Add(p);
}
varpoi = poiTmp;
uint lngPntNumBeg = Stake_Util.getBegPntNum();
fStake.POI_STAKED = new List <POI>();
List <POI> varPOI_STAKE = new List <POI>();
if (strClass == "BLDG")
{
varPOI_STAKE = fStake.POI_STAKE;
}
else
{
if ((varStaBeg == null))
{
varPOI_STAKE = varpoi;
}
else
{
for (int i = 0; i < varpoi.Count; i++)
{
if (varpoi[i].Station >= double.Parse(varStaBeg.ToString()) && varpoi[i].Station <= double.Parse(varStaEnd.ToString()))
{
varPOI_STAKE.Add(varpoi[i]);
}
}
}
}
for (int i = 0; i < varPOI_STAKE.Count; i++)
{
Debug.Print(varPOI_STAKE[i].Station + " " + varPOI_STAKE[i].Desc0);
}
POI poi = new POI();
double dblElev = 0, dblEasting = 0, dblNorthing = 0;
string strDesc = "", strOffset = "";
Point3d dblPnt = Pub.pnt3dO;
for (int i = 0; i < varPOI_STAKE.Count; i++)
{ //**********PROCESS varPOI_STAKE*********************
if (varPOI_STAKE[i].DescX == "")
{
poi = varPOI_STAKE[i];
poi.DescX = varPOI_STAKE[i].Desc0;
varPOI_STAKE[i] = poi;
}
switch (varPOI_STAKE[i].ClassObj)
{
case "WALL":
if (varPOI_STAKE[i].Desc0 == "TOW")
{
dblElev = varPOI_STAKE[i].ElevTOW;
}
else if (varPOI_STAKE[i].Desc0 == "TOF")
{
dblElev = varPOI_STAKE[i].ElevTOF;
}
switch (varPOI_STAKE[i].Desc0)
{
case "AP":
if (varPOI_STAKE[i].DescX.Contains("END"))
{
switch (intSide)
{
case 1: //right side
if (varPOI_STAKE[i].isRightHand)
{ //counterclockwise
doAnglePointOUT(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
else
{ //clockwise
doAnglePointIN(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
break;
case -1: //left side
if (varPOI_STAKE[i].isRightHand)
{ //counterclockwise
doAnglePointIN(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
else
{ //clockwise
doAnglePointOUT(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
break;
}
}
break;
case "BC":
case "EC":
doCurve(ref i, idAlign, objProfile, varPOI_STAKE, intSide, dblOffset, strName);
break;
default:
strDesc = varPOI_STAKE[i].DescX;
if (string.IsNullOrEmpty(strDesc))
{
strDesc = varPOI_STAKE[i].Desc0;
}
try
{
idAlign.getAlignPointLoc(varPOI_STAKE[i].Station, dblOffset * intSide, ref dblEasting, ref dblNorthing);
}
catch (System.Exception)
{
idAlign.getAlignPointLoc(varPOI_STAKE[i].Station - 0.01, dblOffset * intSide, ref dblEasting, ref dblNorthing);
}
dblPnt = new Point3d(dblEasting, dblNorthing, dblElev);
strOffset = dblOffset.ToString();
setOffsetPoint(dblPnt, strOffset, strName, strDesc, idAlign, varPOI_STAKE[i].Station);
break;
}
break;
case "WTR":
dblElev = System.Math.Round(objProfile.ElevationAt(Math.roundDown3(varPOI_STAKE[i].Station)), 2);
switch (varPOI_STAKE[i].Desc0.Substring(0, 2))
{
case "TE":
if (varPOI_STAKE[i].Side == intSide)
{
set5x5(idAlign, dblElev, varPOI_STAKE[i].Station, dblOffset, intSide, strName, varPOI_STAKE[i].DescX);
}
else
{
idAlign.getAlignPointLoc(varPOI_STAKE[i].Station, dblOffset * intSide, ref dblEasting, ref dblNorthing);
dblPnt = new Point3d(dblEasting, dblNorthing, dblElev);
strOffset = dblOffset.ToString();
setOffsetPoint(dblPnt, strOffset, strName, varPOI_STAKE[i].DescX, idAlign, varPOI_STAKE[i].Station);
}
break;
case "AP":
switch (intSide)
{
case 1:
//right side
//counterclockwise
if (varPOI_STAKE[i].isRightHand)
{
doAnglePointOUT(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
//clockwise
}
else
{
doAnglePointIN(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
break;
case -1:
//left side
//counterclockwise
if (varPOI_STAKE[i].isRightHand)
{
doAnglePointIN(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
//clockwise
}
else
{
doAnglePointOUT(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
break;
}
break;
default:
idAlign.getAlignPointLoc(varPOI_STAKE[i].Station, dblOffset * intSide, ref dblEasting, ref dblNorthing);
dblPnt = new Point3d(dblEasting, dblNorthing, dblElev);
strOffset = dblOffset.ToString();
double dblCrossingInv = 0;
string strCrossingInv = "";
if (varPOI_STAKE[i].CrossAlign != "")
{
if (varPOI_STAKE[i].CrossAlignInv != 0)
{
dblCrossingInv = System.Math.Round(varPOI_STAKE[i].CrossAlignInv, 2);
strCrossingInv = string.Format("{0} INV.", dblCrossingInv);
}
else
{
strCrossingInv = "";
}
ASCIIEncoding ascii = new ASCIIEncoding();
string strAlignDesc = string.Format("{0}{1}%%C PIPE {2}", varPOI_STAKE[i].CrossAlignSize, ascii.GetString(new Byte[] { (Byte)34 }), strCrossingInv);
setOffsetPoint(dblPnt, strOffset, strName, strAlignDesc, idAlign, varPOI_STAKE[i].Station);
}
else
{
setOffsetPoint(dblPnt, strOffset, strName, varPOI_STAKE[i].DescX, idAlign, varPOI_STAKE[i].Station);
if (varPOI_STAKE[i].Type != "")
{
setOffsetPoint(dblPnt, strOffset, strName, varPOI_STAKE[i].Type, idAlign, varPOI_STAKE[i].Station, " INV=");
}
}
break;
}
break;
case "CURB":
case "FL":
dblElev = System.Math.Round(objProfile.ElevationAt(Math.roundDown3(varPOI_STAKE[i].Station)), 2);
switch (varPOI_STAKE[i].Desc0)
{
case "AP":
if (varPOI_STAKE[i].DescX.Contains("END"))
{
switch (intSide)
{
case 1: //right side
if (varPOI_STAKE[i].isRightHand)
{ //counterclockwise
doAnglePointOUT(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
else
{ //clockwise
doAnglePointIN(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
break;
case -1: //left side
if (varPOI_STAKE[i].isRightHand)
{ //counterclockwise
doAnglePointIN(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
else
{ //clockwise
doAnglePointOUT(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, intSide, dblOffset);
}
break;
}
}
break;
case "BC":
case "EC":
doCurve(ref i, idAlign, objProfile, varPOI_STAKE, intSide, dblOffset, strName);
break;
default:
strDesc = varPOI_STAKE[i].DescX;
// If strDesc = "" Then
// strDesc = varPOI_Stake[i].Desc0
// End If
try
{
idAlign.getAlignPointLoc(varPOI_STAKE[i].Station, dblOffset * intSide, ref dblEasting, ref dblNorthing);
}
catch (System.Exception)
{
idAlign.getAlignPointLoc(varPOI_STAKE[i].Station - 0.01, dblOffset * intSide, ref dblEasting, ref dblNorthing);
}
dblPnt = new Point3d(dblEasting, dblNorthing, dblElev);
strOffset = dblOffset.ToString();
setOffsetPoint(dblPnt, strOffset, strName, strDesc, idAlign, varPOI_STAKE[i].Station);
break;
}
break;
case "ALIGN":
case "SEWER":
dblElev = System.Math.Round(objProfile.ElevationAt(Math.roundDown3(varPOI_STAKE[i].Station)), 2);
if (varPOI_STAKE[i].Desc0 == "BC")
{
setRadiusPoint(idAlign, varPOI_STAKE[i], varPOI_STAKE[i].Radius, strName);
}
try
{
idAlign.getAlignPointLoc(varPOI_STAKE[i].Station, dblOffset * intSide, ref dblEasting, ref dblNorthing);
}
catch (System.Exception)
{
}
dblPnt = new Point3d(dblEasting, dblNorthing, dblElev);
strOffset = dblOffset.ToString();
setOffsetPoint(dblPnt, strOffset, strName, varPOI_STAKE[i].Desc0, idAlign, varPOI_STAKE[i].Station);
break;
}
}
List <POI> varPOI_STAKED = fStake.POI_STAKED;
int intUBnd = varPOI_STAKED.Count - 1;
uint lngPntNumEnd = uint.Parse(varPOI_STAKED[intUBnd].PntNum);
TypedValue[] tvs = new TypedValue[4] {
new TypedValue(1001, "STAKE"),
new TypedValue(1071, lngPntNumBeg),
new TypedValue(1071, lngPntNumEnd),
new TypedValue(1000, fStake.STAKE_LAYER)
};
idAlign.setXData(tvs, "STAKE");
CgPnt_Group.updatePntGroup("SPNT");
Stake_UpdateProfile.updateProfile(idAlign, (fStake.POI_STAKED), "STAKE", true, "STAKED");
bool exists = false;
ObjectId idDict = Dict.getNamedDictionary("STAKE_PNTS", out exists);
List <Point3d> dblPnts = new List <Point3d>();
Point3d pnt3d = Pub.pnt3dO;
uint lngPntNum = 0;
for (int p = 0; p < varPOI_STAKED.Count; p++)
{
string varPntNum = varPOI_STAKED[p].PntNum;
int intPos = varPntNum.IndexOf(" ");
if (intPos != 0)
{
lngPntNum = uint.Parse(varPntNum.Substring(0, intPos - 1));
}
else
{
lngPntNum = uint.Parse(varPntNum);
}
ObjectId idPnt = BaseObjs._civDoc.CogoPoints.GetPointByPointNumber(uint.Parse(varPOI_STAKED[p].PntNum));
pnt3d = idPnt.getCogoPntCoordinates();
dblPnts.Add(pnt3d);
ResultBuffer rb = new ResultBuffer {
new TypedValue(1000, idPnt.getCogoPntNumber().ToString()),
new TypedValue(1005, idPnt.getHandle().ToString())
};
Dict.addXRec(idDict, idPnt.ToString(), rb);
}
dblPnts.Add(dblPnts[0]);
Misc.logUsage("STAKE", (lngPntNumEnd - lngPntNumBeg + 1));
}
getCardinals_Horizontal(ObjectId idAlign, ref List <POI> varpoi)
{
Alignment objAlign = (Alignment)idAlign.getEnt();
//BEGIN HORIZONTAL CARDINALS
AlignmentEntityCollection objAlignEnts = objAlign.Entities;
AlignmentEntity objAlignEnt = objAlignEnts[0];
//GET BEG AND END OF FIRST SEGMENT - THEN GET END OF FOLLOWING SEGMENTS
switch (objAlignEnt.EntityType)
{
case AlignmentEntityType.Arc:
AlignmentArc objAlignEntArc = (AlignmentArc)objAlignEnt;
POI poi = new POI();
poi.Station = Math.roundDown3((objAlignEntArc.StartStation));
poi.Desc0 = "HC";
poi.ClassObj = fStake.ClassObj;
varpoi.Add(poi);
poi = new POI();
poi.Station = Math.roundDown3((objAlignEntArc.EndStation));
poi.Desc0 = "HC";
poi.ClassObj = fStake.ClassObj;
varpoi.Add(poi);
break;
case AlignmentEntityType.Line:
AlignmentLine objAlignEntTan = (AlignmentLine)objAlignEnt;
poi = new POI();
poi.Station = Math.roundDown3((objAlignEntTan.StartStation));
poi.Desc0 = "HC";
poi.ClassObj = fStake.ClassObj;
varpoi.Add(poi);
poi = new POI();
poi.Station = Math.roundDown3((objAlignEntTan.EndStation));
poi.Desc0 = "HC";
poi.ClassObj = fStake.ClassObj;
varpoi.Add(poi);
break;
}
POI vpoi = new POI();
if (objAlignEnts.Count > 1)
{
for (int i = 1; i <= objAlignEnts.Count - 1; i++)
{
objAlignEnt = objAlignEnts[i];
vpoi = new POI();
switch (objAlignEnt.EntityType)
{
case AlignmentEntityType.Arc:
AlignmentArc objAlignEntArc = (AlignmentArc)objAlignEnt;
vpoi.Station = Math.roundDown3((objAlignEntArc.EndStation));
vpoi.Desc0 = "HC";
vpoi.ClassObj = fStake.ClassObj;
break;
case AlignmentEntityType.Line:
AlignmentLine objAlignEntTan = (AlignmentLine)objAlignEnt;
vpoi.Station = Math.roundDown3((objAlignEntTan.EndStation));
vpoi.Desc0 = "HC";
vpoi.ClassObj = fStake.ClassObj;
break;
}
varpoi.Add(vpoi);
}
}
//END HORIZONTAL CARDINALS
}
set5x5(ObjectId idAlign, double dblElev, double dblStation, double dblOffset, int intSide, string strName, string strDesc)
{
double dblAngBack = 0;
double dblAngAhead = 0;
double dblEasting0 = 0;
double dblNorthing0 = 0;
Alignment objAlign = (Alignment)idAlign.getEnt();
AlignmentEntityCollection alignEnts = objAlign.Entities;
//Debug.Print objAlign.EndingStation
AlignmentEntity alignEnt0 = (AlignmentEntity)alignEnts.EntityAtStation(dblStation);
AlignmentLine alignLine0 = null;
AlignmentSubEntityLine subEntLine0 = null;
if (alignEnt0.EntityType == AlignmentEntityType.Line)
{
alignLine0 = (AlignmentLine)alignEnts.EntityAtStation(dblStation);
subEntLine0 = (AlignmentSubEntityLine)alignLine0[0];
}
else
{
return;
}
AlignmentLine alignLineA = null;
AlignmentLine alignLineB = null;
AlignmentEntity alignEntX = null;
Point2d pnt2dBeg = Point2d.Origin;
Point2d pnt2dEnd = Point2d.Origin;
//Point at Tangent Start Point
if (Math.roundDown3(dblStation) == Math.roundDown3(alignLine0.StartStation))
{
alignLineA = alignLine0;
pnt2dBeg = alignLineA.StartPoint;
pnt2dEnd = alignLineA.EndPoint;
dblAngAhead = pnt2dBeg.getDirection(pnt2dEnd);
//First Tangent
if (alignEnt0.EntityBefore != 0)
{
alignEntX = alignEnts[alignEnt0.EntityBefore - 1];
if (alignEntX.EntityType == AlignmentEntityType.Line)
{
alignLineB = (AlignmentLine)alignEntX;
pnt2dBeg = alignLineB.StartPoint;
pnt2dEnd = alignLineB.EndPoint;
dblAngBack = pnt2dBeg.getDirection(pnt2dEnd);
}
}
else
{
dblAngBack = dblAngAhead;
// Debug.Print dblAngBack
}
//Point at Tangent End Point
}
else if (Math.roundDown3(dblStation) == Math.roundDown3(alignLine0.EndStation))
{
alignLineB = alignLine0;
pnt2dBeg = alignLineB.StartPoint;
pnt2dEnd = alignLineB.EndPoint;
dblAngBack = pnt2dBeg.getDirection(pnt2dEnd);
//Last Tangent
if (alignEnt0.EntityAfter != 0)
{
alignEntX = alignEnts[alignLine0.EntityAfter - 1];
if (alignEntX.EntityType == AlignmentEntityType.Line)
{
alignLineA = (AlignmentLine)alignEntX;
pnt2dBeg = alignLineA.StartPoint;
pnt2dEnd = alignLineA.EndPoint;
dblAngAhead = pnt2dBeg.getDirection(pnt2dEnd);
}
}
else
{
dblAngAhead = dblAngBack;
}
}
else
{
pnt2dBeg = alignLine0.StartPoint;
pnt2dEnd = alignLine0.EndPoint;
dblAngAhead = pnt2dBeg.getDirection(pnt2dEnd);
}
idAlign.getAlignPointLoc(dblStation, 0.0, ref dblEasting0, ref dblNorthing0);
//get point of intersection
Point3d pnt3d = new Point3d(dblEasting0, dblNorthing0, 0.0);
Point3d pnt3dX = pnt3d.traverse(dblAngAhead + (3 * PI / 4 * intSide * -1), dblOffset / System.Math.Sin(PI / 4));
pnt3dX = pnt3dX.addElevation(dblElev);
string strOffset = string.Format("{0} x {1}", dblOffset.ToString(), dblOffset.ToString());
Debug.Print(dblStation + " set5x5");
setOffsetPoint(pnt3dX, strOffset, strName, strDesc, idAlign, dblStation);
pnt3dX = pnt3dX.traverse(dblAngAhead + (PI / 4 * intSide * -1), dblOffset / System.Math.Sin(PI / 4));
pnt3dX = pnt3dX.addElevation(dblElev);
strOffset = string.Format("{0} x {1}", dblOffset.ToString(), dblOffset.ToString());
Debug.Print(dblStation + " set5x5");
setOffsetPoint(pnt3dX, strOffset, strName, strDesc, idAlign, dblStation);
}
changeAlignStartPoint()
{
//BEGIN: UPDATE PROFILE, TABLE, AND POIs
AlgnData algnData = new AlgnData();
ObjectId idAlign = ObjectId.Null;
Alignment objAlign = null;
if (selectAlignment(idAlign))
{
objAlign = fStake.ACTIVEALIGN;
}
else
{
return;
}
objAlign = fStake.ACTIVEALIGN;
AlignmentEntityCollection objAlignEnts = objAlign.Entities;
//BEGIN: UPDATE PROFILE, TABLE, AND POIs
double dblLenAlign = objAlign.Length;
PromptStatus ps;
Point3d varPnt = UserInput.getPoint("Select Desired Start Point", out ps, osMode: 0);
double dblStation = 0, dblOffset = 0;
idAlign.getAlignStaOffset(varPnt, ref dblStation, ref dblOffset);
double dblStationStart = objAlign.StartingStation;
double dblStationDelta = dblStation - dblStationStart;
// if varPnt is out of range then dblStation returns ZERO
Profile profFLOWLINE = Prof.getProfile(idAlign, "FLOwLINE");
ProfilePVICollection pvis = profFLOWLINE.PVIs;
List <POI> varPOI_Temp = new List <POI>();
foreach (ProfilePVI pvi in pvis)
{
POI poi = new POI {
Station = Math.roundDown3(pvi.Station), Elevation = pvi.Elevation
};
varPOI_Temp.Add(poi);
}
Debug.Print("varPOI_Temp Before");
for (int i = 0; i < varPOI_Temp.Count; i++)
{
Debug.Print(varPOI_Temp[i].Station + " " + varPOI_Temp[i].Elevation);
}
//adjust POI_Temp stationing
for (int i = 0; i < varPOI_Temp.Count; i++)
{
POI poi = varPOI_Temp[i];
if (poi.Station < dblStationDelta + dblStationStart)
{
poi.Station = Math.roundDown3(dblLenAlign + varPOI_Temp[i].Station);
}
else
{
poi.Station = Math.roundDown3(varPOI_Temp[i].Station - dblStationDelta);
}
varPOI_Temp[i] = poi;
}
List <POI> poiTmp = new List <POI>();
var sortPOI_Temp = from t in varPOI_Temp
orderby t.Station ascending
select t;
foreach (var t in sortPOI_Temp)
{
poiTmp.Add(t);
}
varPOI_Temp = poiTmp;
int k = varPOI_Temp.Count;
POI poitemp = varPOI_Temp[k - 1];
poitemp.Elevation = varPOI_Temp[0].Elevation;
varPOI_Temp[k] = poitemp;
Debug.Print("varPOI_Temp After");
for (int i = 0; i < k; i++)
{
Debug.Print(varPOI_Temp[i].Station + " " + varPOI_Temp[i].Elevation);
}
//END: UPDATE PROFILE, TABLE, AND POIs
ObjectId idPoly = objAlign.GetPolyline();
Polyline poly = (Polyline)idPoly.getEnt();
string strAlignName = objAlign.Name;
AlgnData aData;
for (int j = 1; j < fStake.algnData.Count; j++)
{
aData = fStake.algnData[j];
if (aData.AlignHandle == objAlign.Handle)
{
break;
}
}
objAlign.ReferencePointStation = 100.0;
foreach (AlignmentEntity ent in objAlignEnts)
{
objAlignEnts.Remove(ent);
}
List <Vertex2d> v2ds = Conv.poly_Vertex2dList(idPoly);
int p = 0;
foreach (Vertex2d v in v2ds)
{
if (v.Position.IsEqualTo(varPnt, new Tolerance(0, 0)))
{
break;
}
p++;
}
List <Vertex2d> v2dsNew = new List <Vertex2d>();
for (int i = p; i < v2ds.Count; i++)
{
v2dsNew.Add(v2ds[i]);
}
for (int i = 1; i < p; i++)
{
v2dsNew.Add(v2ds[i]);
}
v2dsNew.Add(v2ds[p]);
int lngID = 0;
Point3d dblPntBeg = Pub.pnt3dO, dblPntEnd = Pub.pnt3dO, dblPntMid = Pub.pnt3dO;
for (int i = 1; i < v2dsNew.Count; i++)
{
if (v2dsNew[i].Bulge == 0)
{
dblPntBeg = v2dsNew[i - 1].Position;
dblPntEnd = v2dsNew[i = 0].Position;
AlignmentLine objAlignEntTan = objAlign.Entities.AddFixedLine(lngID, dblPntBeg, dblPntEnd);
lngID = objAlignEntTan.EntityId;
}
else
{
dblPntBeg = v2dsNew[i - 1].Position;
dblPntEnd = v2dsNew[i = 0].Position;
int intDir = 0;
if (v2dsNew[i - 1].Bulge > 0)
{
intDir = 1;
}
else
{
intDir = -1;
}
Arc arc = (Arc)Arc.Create(IntPtr.Zero, true);
arc.StartPoint = dblPntBeg;
arc.EndPoint = dblPntEnd;
Point3d pnt3dMidLC = dblPntBeg.getMidPoint3d(dblPntEnd);
double lenLC = dblPntBeg.getDistance(dblPntEnd);
double dirLC = dblPntBeg.getDirection(dblPntEnd);
double lenM = System.Math.Abs(lenLC / 2 * v2dsNew[i - 1].Bulge);
dblPntMid = pnt3dMidLC.traverse(dirLC + System.Math.PI / 2 * intDir, lenM);
AlignmentArc objAlignEntArc = objAlign.Entities.AddFixedCurve(lngID, dblPntBeg, dblPntMid, dblPntEnd);
lngID = objAlignEntArc.EntityId;
}
}
objAlign.Update();
objAlign.ReferencePoint = varPnt.Convert2d(BaseObjs.xyPlane);
objAlign.ReferencePointStation = System.Math.Round(100.0 + dblStationDelta, 3);
//BEGIN: UPDATE PROFILE, TABLE, AND POIs
List <POI> varpoi = fStake.POI_CALC;
//POIs are updated when selectAlignment is executed
//ADJUST POI STATIONING
//need complete POIs for descriptions
for (int i = 0; i < varpoi.Count; i++)
{
if (varpoi[i].Station < dblStationDelta + dblStationStart)
{
varpoi[i].Station = Math.roundDown3(dblLenAlign + varpoi[i].Station);
}
else
{
varpoi[i].Station = Math.roundDown3(varpoi[i].Station - dblStationDelta);
}
}
varpoi = varpoi.sortPOIbyStation();
int n = varpoi.Count;
varpoi[0].DescX = "BEG " + varpoi[0].Desc0;
varpoi[n - 2].DescX = varpoi[n - 2].DescX.Replace("END", "").Trim();
varpoi[n - 1].DescX = varpoi[n - 1].DescX.Replace("BEG", "END").Trim();
if (fStake.ClassObj == "CURB")
{
Stake_AddProfile.makeProfile(idAlign, varPOI_Temp, "CURB", "ByLayout", true);
}
ObjectId idTable = Stake_Table.makeTable(idAlign, varpoi);
Stake_Table.addTableData(idTable, varpoi);
if (Stake_GetBC_EC.getBC_EC(idAlign, ref varpoi) == false)
{
return;
}
fStake.POI_CALC = varpoi;
//END: UPDATE PROFILE, TABLE, AND POIs
}
userAddCrossingsFeatures(ObjectId idAlign, ref List <POI> varpoi)
{
Alignment objAlign = (Alignment)idAlign.getEnt();
bool escape;
string xRefPath = "";
//BEGIN GET CROSSING FEATURES
List <string> strLayName = new List <string>();
List <string> strHandle = new List <string>();
List <Entity> ents = new List <Entity>();
do
{
Entity obj = xRef.getEntity("Select crossing entity <ESC to exit>: ", out escape, out xRefPath);
if (obj == null || escape)
{
break;
}
strLayName.Add(obj.Layer);
strHandle.Add(obj.Handle.ToString());
ents.Add(obj);
}while (true);
double dblStation = 0, dblOffset = 0;
foreach (Entity ent in ents)
{
Point3dCollection varPntInt = new Point3dCollection();
objAlign.IntersectWith(ent, Intersect.OnBothOperands, varPntInt, IntPtr.Zero, IntPtr.Zero);
//EXTEND NONE
if (varPntInt.Count == 0)
{
return(false);
}
int k = varPntInt.Count;
for (int n = 0; n < k; n++)
{
Point3d dblPnt = varPntInt[n];
objAlign.StationOffset(dblPnt.X, dblPnt.Y, ref dblStation, ref dblOffset);
POI vpoi = new POI();
if (ent.Layer.Contains(fStake.NameStakeObject))
{
vpoi.Desc0 = "TEE";
}
else
{
int intPos = ent.Layer.IndexOf("|");
vpoi.Desc0 = ent.Layer.Substring(intPos + 1);
vpoi.CrossDesc = ent.Layer.Substring(intPos + 1);
}
vpoi.Station = Math.roundDown3(dblStation);
vpoi.ClassObj = fStake.ClassObj;
varpoi.Add(vpoi);
}
}
varpoi = varpoi.sortPOIbyStation();
return(true);
}
getCrossingAligns(ObjectId idAlign, ref List <POI> varpoi)
{
Alignment objAlign = (Alignment)idAlign.getEnt();
bool boolAdd = false;
double dblStation = 0, dblStationX = 0, dblOffset = 0;
ObjectIdCollection idAligns = BaseObjs._civDoc.GetAlignmentIds();
for (int i = 0; i < idAligns.Count; i++)
{
if (Align.getAlignName(idAligns[i]) != Align.getAlignName(idAlign))
{
Alignment objAlignX = (Alignment)idAligns[i].getEnt();
objAlignX.Highlight();
if (objAlignX.IsReferenceObject)
{
boolAdd = true;
Point3dCollection varPntInt = new Point3dCollection();
objAlign.IntersectWith(objAlignX, Intersect.OnBothOperands, varPntInt, IntPtr.Zero, IntPtr.Zero);
for (int k = 0; k < varPntInt.Count; k++)
{
Point3d pnt3dInt = varPntInt[k];
idAlign.getAlignStaOffset(pnt3dInt, ref dblStation, ref dblOffset);
POI vpoi = new POI();
vpoi.Station = Math.roundDown3(dblStation);
vpoi.Desc0 = fStake.NameStakeObject;
vpoi.ClassObj = fStake.ClassObj;
vpoi.CrossAlign = objAlignX.Name;
//GET PIPE INVERT ELEVATION
PIPE_DATA varPipeData = Stake_GetPipeInvertElev.getPipeData(dblStation, idAlign);
vpoi.Size = varPipeData.Size;
vpoi.Invert = varPipeData.Invert;
idAligns[i].getAlignStaOffset(pnt3dInt, ref dblStationX, ref dblOffset);
vpoi.CrossAlignSta = System.Math.Round(dblStation, 3);
//GET PIPE INVERT ELEVATION
varPipeData = Stake_GetPipeInvertElev.getPipeData(dblStationX, idAligns[i]);
vpoi.CrossAlignSize = varPipeData.Size;
vpoi.CrossAlignInv = varPipeData.Invert;
varpoi.Add(vpoi);
}
}
}
}
if (boolAdd)
{
varpoi = varpoi.sortPOIbyStation();
}
}
Create_Align_Profile_By3dPoly2b2c(Alignment objAlignPL, string strName, string strNameAlign, ObjectId idLayer, ObjectId idPoly3dRF)
{
bool boolBeg = false;
bool boolEnd = false;
ObjectId idProfileStyle = Prof_Style.getProfileStyle("WALL");
ObjectId idStyleLabelSet = Prof_Style.getProfileLabelSetStyle("WALL");
//ObjectId idProfileStyle = Prof_Style.getProfileStyle("Standard");
//ObjectId idStyleLabelSet = Prof_Style.getProfileLabelSetStyle("Standard");
List <Point3d> pnt3dsPoly3d = idPoly3dRF.getCoordinates3dList();
ObjectId idPoly2dRF = idPoly3dRF.toPolyline(idPoly3dRF.getLayer());
Point3d pnt3dBegRF = idPoly2dRF.getBegPnt();
Point3d pnt3dEndRF = idPoly2dRF.getEndPnt();
double easting = 0, northing = 0;
objAlignPL.PointLocation(objAlignPL.StartingStation, 0.0, ref easting, ref northing);
Point3d pnt3dBegWALL = new Point3d(easting, northing, 0);
objAlignPL.PointLocation(Math.roundDown2(objAlignPL.EndingStation), 0.0, ref easting, ref northing);
Point3d pnt3dEndWALL = new Point3d(easting, northing, 0);
List <Point3d> pnts3d = new List <Point3d> {
pnt3dBegWALL, pnt3dEndWALL
};
double dblAngle = 0;
dblAngle = pnt3dBegWALL.getDirection(pnt3dEndWALL);
double dblDistBeg = 0;
dblDistBeg = Geom.getPerpDistToLine(pnt3dBegWALL, pnt3dEndWALL, pnt3dBegRF);
double dblDistEnd = 0;
dblDistEnd = Geom.getPerpDistToLine(pnt3dBegWALL, pnt3dEndWALL, pnt3dEndRF);
double dblStaBegRef = 0, dblOffBegRef = 0;
if (dblDistBeg > dblDistEnd)
{
idPoly2dRF.reversePolyX();
pnt3dBegRF = idPoly2dRF.getBegPnt();
pnt3dEndRF = idPoly2dRF.getEndPnt();
dblDistBeg = Geom.getPerpDistToLine(pnt3dBegWALL, pnt3dEndWALL, pnt3dBegRF);
dblDistEnd = Geom.getPerpDistToLine(pnt3dBegWALL, pnt3dEndWALL, pnt3dEndRF);
}
if (dblDistBeg < 0)
{
boolBeg = true;
pnt3dBegWALL = Math.traverse(pnt3dBegWALL, dblAngle - PI, dblDistBeg * -1 + 10);
pnts3d.Insert(0, pnt3dBegWALL);
}
if (dblDistEnd > objAlignPL.Length + 10)
{
boolEnd = true;
pnt3dEndWALL = Math.traverse(pnt3dEndWALL, dblAngle, objAlignPL.Length - dblDistEnd + 10);
pnts3d.Add(pnt3dEndWALL);
}
Profile objProfile = null;
string strAlignName = objAlignPL.Name;
string strLayer = objAlignPL.Layer;
idLayer = Layer.manageLayers(strLayer);
if (boolBeg || boolEnd)
{
Align.removeAlignment(strAlignName);
ObjectId idPoly2dWALL = Draw.addPoly(pnts3d, strLayer);
objAlignPL = Align.addAlignmentFromPoly(strAlignName, strLayer, idPoly2dWALL, "Standard", "Standard", true);
try
{
objAlignPL.StationOffset(pnt3dBegRF.X, pnt3dBegRF.Y, ref dblStaBegRef, ref dblOffBegRef);
}
catch (Autodesk.Civil.PointNotOnEntityException)
{
dblStaBegRef = 0.0;
}
objAlignPL.PointLocation(dblStaBegRef, 0.0, ref easting, ref northing);
Point2d pnt2dRef = new Point2d(easting, northing);
objAlignPL.ReferencePoint = pnt2dRef;
fWall1.ACTIVEALIGN = objAlignPL;
bool exists = false;
TinSurface objSurfaceEXIST = Surf.getTinSurface("EXIST", out exists);
ObjectId idAlignStyle = Align_Style.getAlignmentStyle("Standard");
ObjectId idAlignLabelSetStyle = Align_Style.getAlignmentLabelSetStyle("Standard");
using (BaseObjs._acadDoc.LockDocument())
{
using (Transaction TR = BaseObjs.startTransactionDb())
{
objProfile = Prof.addProfileBySurface("EXIST", objAlignPL.ObjectId, objSurfaceEXIST.ObjectId, idLayer, idProfileStyle, idStyleLabelSet);
TR.Commit();
}
}
}
Alignment objAlignRF = Align.addAlignmentFromPoly(strNameAlign, strLayer, idPoly2dRF, "Standard", "Standard", true);
objAlignRF.ReferencePointStation = 1000.0;
double dblStation = 0;
double dblOffset = 0;
ObjectId idAlignRF = ObjectId.Null;
try
{
idAlignRF.getAlignStaOffset(pnt3dsPoly3d[0], ref dblStation, ref dblOffset);
}
catch (Autodesk.Civil.PointNotOnEntityException)
{
dblStation = 0.0;
}
if (dblStation != objAlignRF.StartingStation)
{
idPoly3dRF.reversePolyX();
pnt3dsPoly3d = idPoly3dRF.getCoordinates3dList();
}
using (BaseObjs._acadDoc.LockDocument())
{
using (Transaction TR = BaseObjs.startTransactionDb())
{
objProfile = Prof.addProfileByLayout(strName, objAlignRF.ObjectId, idLayer, idProfileStyle, idStyleLabelSet);
double dblElev = 0;
for (short i = 0; i <= pnt3dsPoly3d.Count - 1; i++)
{
try
{
idAlignRF.getAlignStaOffset(pnt3dsPoly3d[i], ref dblStation, ref dblOffset);
}
catch (Autodesk.Civil.PointNotOnEntityException)
{
dblStation = 0.0;
}
dblElev = pnt3dsPoly3d[i].Z;
objProfile.PVIs.AddPVI(dblStation, dblElev);
}
TR.Commit();
}
}
return(idAlignRF);
}
CreateProfileByDesign2b(Alignment objAlignPL, Alignment objAlignRF)
{
Profile objProfileDES = null;
Profile objprofilePL = Prof.getProfile(objAlignPL.Name, "EXIST");
Profile objProfileRF = Prof.getProfile(objAlignRF.Name, "CPNT");
double XT = 0;
double X1 = 0;
double X2 = 0;
double X0 = Convert.ToDouble(fWall1.tbx_X0.Text);
double S0 = Convert.ToDouble(fWall1.tbx_S0.Text);
double CF = Convert.ToDouble(fWall1.tbx_CF.Text);
double B1 = Convert.ToDouble(fWall1.tbx_B1.Text);
double S1 = Convert.ToDouble(fWall1.tbx_S1.Text);
double SG = Convert.ToDouble(fWall1.tbx_SG.Text);
double B2 = Convert.ToDouble(fWall1.tbx_B2.Text);
double S2 = Convert.ToDouble(fWall1.tbx_S2.Text);
double dblOffsetPL = 0;
double dblEasting = 0;
double dblNorthing = 0;
List <Point3d> pnts3dX0 = new List <Point3d>();
List <Point3d> pnts3dFL = new List <Point3d>();
List <Point3d> pnts3dTC = new List <Point3d>();
List <Point3d> pnts3dTOE = new List <Point3d>();
List <Point3d> pnts3dTS = new List <Point3d>();
List <Point3d> pnts3dTOP = new List <Point3d>();
List <Point3d> pnts3dWT0 = new List <Point3d>();
List <Point3d> pnts3dWB0 = new List <Point3d>();
List <Point3d> pnts3dWTB = new List <Point3d>();
List <Point3d> pnts3dWBB = new List <Point3d>();
short intSign = 0;
double dblElevRF = 0;
double dblElevFL = 0;
double dblElevTC = 0;
double dblElevTOE = 0;
double dblElevTS = 0;
double dblElevTOP = 0;
double dblElevWT0 = 0;
double dblElevWB0 = 0;
double dblElevWTB = 0;
double dblElevWBB = 0;
double dblElevPL = 0;
double dblWallWidth = 10 / 12;
double dblStationRF = 0;
double dblStationPL = 0;
ObjectId idPoly3d = ObjectId.Null;
Point3d pnt3d = default(Point3d);
string strLayerName = null;
bool boolDesLow = false;
bool boolDesHigh = false;
strLayerName = "PROFILE-CPNT";
ObjectId idLayer = Layer.manageLayers(strLayerName);
objAlignRF.PointLocation(objAlignRF.StartingStation, 0, ref dblEasting, ref dblNorthing);
try
{
objAlignPL.StationOffset(dblEasting, dblNorthing, ref dblStationPL, ref dblOffsetPL);
}
catch (Autodesk.Civil.PointNotOnEntityException)
{
dblStationPL = 0.0;
}
if (dblOffsetPL < 0)
{
intSign = -1;
dblOffsetPL = dblOffsetPL * -1;
}
else
{
intSign = 1;
}
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//Dim varPNT_DATA_FINAL() As PNT_DATA = getPNT_DATA_FINAL(objAlignPL, objAlignRF)
List <double> dblStationsFinal = wd.getPNT_DATA_FINAL(objAlignPL, objAlignRF);
fWall1.Stations = dblStationsFinal;
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
if ((fWall1.Stations == null))
{
return;
}
else
{
objProfileRF = Prof.getProfile(objAlignRF.Name, "CPNT");
objprofilePL = Prof.getProfile(objAlignPL.Name, "EXIST");
}
//-------CREATE PROFILE FOR DESIGN SURFACE AT WALL/PL ALIGNMENT
try
{
Prof.removeProfile(objAlignPL.ObjectId, "CPNT");
//Dim idProfileStyle As ObjectId = Prof_Style.getProfileStyle("WALL")
//Dim idStyleLabelSet As ObjectId = Prof_Style.getProfileLabelSetStyle("WALL")
ObjectId idProfileStyle = Prof_Style.getProfileStyle("Standard");
ObjectId idStyleLabelSet = Prof_Style.getProfileLabelSetStyle("Standard");
using (BaseObjs._acadDoc.LockDocument())
{
using (Transaction TR = BaseObjs.startTransactionDb())
{
objProfileDES = Prof.addProfileByLayout("CPNT", objAlignPL.ObjectId, idLayer, idProfileStyle, idStyleLabelSet);
TR.Commit();
}
}
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
double dblAngOFF = 0;
double dblAngWALL = 0;
double dblSkew = 0;
Point3d pnt3dBeg = default(Point3d);
Point3d pnt3dEnd = default(Point3d);
pnt3dBeg = objAlignRF.StartPoint;
pnt3dEnd = objAlignRF.EndPoint;
dblAngOFF = Measure.getAzRadians(pnt3dBeg, pnt3dEnd);
pnt3dBeg = objAlignPL.StartPoint;
pnt3dEnd = objAlignPL.EndPoint;
dblAngWALL = Measure.getAzRadians(pnt3dBeg, pnt3dEnd);
dblSkew = dblAngWALL - dblAngOFF;
bool boolStart = false;
bool boolDone = false;
for (int i = 0; i < dblStationsFinal.Count; i++)
{
dblStationRF = Math.roundDown1(dblStationsFinal[i]);
//CURRENT STATION ON RF
objAlignRF.PointLocation(dblStationRF, 0.0, ref dblEasting, ref dblNorthing);
try
{
objAlignPL.StationOffset(dblEasting, dblNorthing, ref dblStationPL, ref dblOffsetPL);
// CORRESPONDING STATION ON PL
}
catch (Autodesk.Civil.PointNotOnEntityException)
{
dblStationPL = 0.0;
}
if (System.Math.Round(dblStationPL, 1) >= System.Math.Round(objAlignPL.StartingStation, 1))
{
boolStart = true;
}
if (System.Math.Round(dblStationPL, 1) <= System.Math.Round(objAlignPL.EndingStation, 1))
{
boolDone = false;
}
if (boolStart == true & boolDone == false)
{
dblElevRF = objProfileRF.ElevationAt(dblStationRF);
//elevation on RF at current RF station
dblElevFL = dblElevRF + (X0 - 0.15) * S0;
dblElevTC = dblElevFL + CF / 12;
dblElevPL = objprofilePL.ElevationAt(dblStationPL);
if (dblElevRF > 0 & dblElevPL > 0)
{
dblElevTS = dblElevPL - (B2 * S2);
objAlignRF.PointLocation(dblStationRF, X0 - 0.15, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevFL);
pnts3dFL.Add(pnt3d);
objAlignRF.PointLocation(dblStationRF, X0, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTC);
pnts3dTC.Add(pnt3d);
if (dblElevTS - dblElevTC > 0)
{
boolDesLow = true;
boolDesHigh = false;
}
else if (dblElevTC - dblElevTS > 0)
{
boolDesHigh = true;
boolDesLow = false;
}
if (boolDesLow)
{
objAlignRF.PointLocation(dblStationRF, B1, ref dblEasting, ref dblNorthing);
//point location at back of B1
try
{
objAlignPL.StationOffset(dblEasting, dblNorthing, ref dblStationPL, ref dblOffsetPL);
}
catch (Autodesk.Civil.PointNotOnEntityException)
{
dblStationPL = 0.0;
}
if (dblStationPL == 0)
{
pnt3dBeg = new Point3d(dblEasting, dblNorthing, 0.0);
pnt3dEnd = objAlignPL.EndPoint;
dblOffsetPL = pnt3dBeg.getDistance(pnt3dEnd);
}
XT = System.Math.Abs(dblOffsetPL) - X0;
X2 = ((dblElevTC - dblElevPL) + (XT - B2) * S1 + (B2 * S2)) / (S1 - SG);
//slope width
if (X2 >= 0)
{
X1 = XT - X2;
if (X1 >= 0)
{
dblElevTOE = dblElevTC + (S1 * B1) + (X1 * S1);
objAlignPL.PointLocation(dblStationPL, (X2 + B2) * intSign, ref dblEasting, ref dblNorthing);
//point perp to PL
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOE);
pnts3dTOE.Add(pnt3d);
dblElevTS = dblElevTOE + X2 * SG;
objAlignPL.PointLocation(dblStationPL, (B2)*intSign, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTS);
pnts3dTS.Add(pnt3d);
dblElevTOP = dblElevTS + B2 * S2;
objAlignPL.PointLocation(dblStationPL, 0.0, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOP);
pnts3dTOP.Add(pnt3d);
try
{
objProfileDES.PVIs.AddPVI(dblStationPL, dblElevTOP);
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
}
else
{
//here is where we put the wall at the limit of pavement or at back of B1
X1 = B1;
X2 = XT - X1;
dblElevTOE = dblElevTC + X1 * S1;
objAlignRF.PointLocation(dblStationRF, X1 + 0.1, ref dblEasting, ref dblNorthing);
//point perp to RF
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOE);
pnts3dTOE.Add(pnt3d);
dblElevTS = dblElevTOE + X2 * SG;
objAlignPL.PointLocation(dblStationPL, B2 * intSign, ref dblEasting, ref dblNorthing);
//point perp to PL
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTS);
pnts3dTS.Add(pnt3d);
dblElevTOP = dblElevTS + B2 * S2;
objAlignPL.PointLocation(dblStationPL, 0.0, ref dblEasting, ref dblNorthing);
//point perp to PL
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOP);
pnts3dTOP.Add(pnt3d);
//wall location
dblElevWT0 = dblElevPL + 1.0;
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWT0);
pnts3dWT0.Add(pnt3d);
dblElevWB0 = dblElevTOP - 1.0;
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWB0);
pnts3dWB0.Add(pnt3d);
dblElevWTB = dblElevWT0;
objAlignPL.PointLocation(dblStationRF, dblWallWidth * intSign * -1, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWT0);
pnts3dWTB.Add(pnt3d);
dblElevWBB = dblElevWB0;
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWBB);
pnts3dWBB.Add(pnt3d);
try
{
objProfileDES.PVIs.AddPVI(dblStationRF, dblElevTOP);
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
}
}
//wall at pl
}
else if (boolDesHigh)
{
X1 = B1;
X2 = XT - X1;
dblElevTOE = dblElevTC + X1 * S1;
objAlignRF.PointLocation(dblStationRF, X1 + 0.1, ref dblEasting, ref dblNorthing);
//point perp to OFF at back of bench
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOE);
pnts3dTOE.Add(pnt3d);
dblElevTS = dblElevTOE + X2 * S1;
objAlignPL.PointLocation(dblStationPL, B2 * intSign, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTS);
pnts3dTS.Add(pnt3d);
dblElevTOP = dblElevTS + B2 * S2;
objAlignPL.PointLocation(dblStationRF, 0, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevTOP);
pnts3dTOP.Add(pnt3d);
//WALL Limits
dblElevWT0 = dblElevTOP + 1.0;
//wall top 0 offset
objAlignPL.PointLocation(dblStationRF, 0, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWT0);
pnts3dWT0.Add(pnt3d);
dblElevWB0 = dblElevPL - 1.0;
//wall bottom 0.1 offset
objAlignPL.PointLocation(dblStationRF, 0.1 * intSign, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWB0);
pnts3dWB0.Add(pnt3d);
dblElevWTB = dblElevWT0;
//wall top WallWidth offset
objAlignPL.PointLocation(dblStationRF, dblWallWidth * intSign * -1, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWT0);
pnts3dWTB.Add(pnt3d);
dblElevWBB = dblElevWB0;
//Wall bottom WallWidth + 0.1 offset
objAlignPL.PointLocation(dblStationRF, (dblWallWidth + 0.1) * intSign * -1, ref dblEasting, ref dblNorthing);
pnt3d = new Point3d(dblEasting, dblNorthing, dblElevWBB);
pnts3dWBB.Add(pnt3d);
try
{
objProfileDES.PVIs.AddPVI(dblStationRF, dblElevTOP);
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
}
}
}
}
try
{
ObjectIdCollection objEntIDs = new ObjectIdCollection();
ObjectIdCollection objEntWallIDs = new ObjectIdCollection();
TypedValue[] tvs = new TypedValue[2];
tvs[0] = new TypedValue(1001, "WALL");
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dFL, "CPNT-BRKLINE", 1);
tvs[1] = new TypedValue(1000, "FL");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dTC, "CPNT-BRKLINE", 2);
tvs[1] = new TypedValue(1000, "TC");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dTOE, "CPNT-BRKLINE", 3);
tvs[1] = new TypedValue(1000, "TOE");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dTS, "CPNT-BRKLINE", 4);
tvs[1] = new TypedValue(1000, "TS");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dTOP, "CPNT-BRKLINE", 5);
tvs[1] = new TypedValue(1000, "TOP");
idPoly3d.setXData(tvs, "WALL");
objEntIDs.Add(idPoly3d);
string strLayer = string.Format("{0}-BRKLINE", objAlignPL.Name);
Layer.manageLayers(strLayer);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dWB0, strLayer, 11);
tvs[1] = new TypedValue(1000, "WB0");
idPoly3d.setXData(tvs, "WALL");
objEntWallIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dWT0, strLayer, 170);
tvs[1] = new TypedValue(1000, "WT0");
idPoly3d.setXData(tvs, "WALL");
objEntWallIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dWTB, strLayer, 170);
tvs[1] = new TypedValue(1000, "WTB");
idPoly3d.setXData(tvs, "WALL");
objEntWallIDs.Add(idPoly3d);
idPoly3d = Base_Tools45.Draw.addPoly3d(pnts3dWBB, strLayer, 11);
tvs[1] = new TypedValue(1000, "WBB");
idPoly3d.setXData(tvs, "WALL");
objEntWallIDs.Add(idPoly3d);
ObjectIdCollection objEntEndIDs = default(ObjectIdCollection);
objEntEndIDs = wdp.makeEndBrklinesWALL(strLayer, objEntIDs, false);
bool exists = false;
TinSurface objSurfaceCPNT = Surf.getTinSurface("CPNT-ON", out exists);
objSurfaceCPNT.BreaklinesDefinition.AddStandardBreaklines(objEntIDs, 0, 0, 0, 0);
objSurfaceCPNT.BreaklinesDefinition.AddStandardBreaklines(objEntEndIDs, 0, 0, 0, 0);
TinSurface objSurfaceWall = Surf.getTinSurface(objAlignPL.Name, out exists);
objSurfaceWall.BreaklinesDefinition.AddStandardBreaklines(objEntWallIDs, 0, 0, 0, 0);
objEntEndIDs = wdp.makeEndBrklinesWALL(strLayer, objEntWallIDs, true);
objSurfaceWall.BreaklinesDefinition.AddStandardBreaklines(objEntEndIDs, 0, 0, 0, 0);
}
catch (Autodesk.AutoCAD.Runtime.Exception)
{
}
objProfileDES.Layer = strLayerName;
}
getStationing(ref List <POI> varpoi, double dblStaBeg, double dblStaEnd)
{
POI vPoi;
bool boolBC = false;
bool boolEC = false;
bool boolSta = true;
double dblInterval0 = double.Parse(fStake.cboInterval.Text);
double dblTolerance = double.Parse(fStake.cboTolerance.Text);
//BEGIN ON-STATION
if (fStake.optYes.Checked)
{
double dblSta = getNominalStation(dblStaBeg, dblInterval0);
//get nominal stations
POI vPoiCur = new POI();
do
{
dblSta += dblInterval0;
boolSta = false;
for (int x = 0; x < varpoi.Count; x++)
{
vPoiCur = varpoi[x];
if (System.Math.Abs(varpoi[x].Station - dblSta) < double.Parse(fStake.cboTolerance.Text))
{
dblSta = varpoi[x].Station;
boolSta = true;
break;
}
}
if (boolSta == false && dblSta < dblStaEnd)
{
vPoi = new POI();
vPoi.Station = Math.roundDown3(dblSta);
vPoi.ClassObj = fStake.ClassObj;
if (fStake.ClassObj == "WALL")
{
vPoi.Desc0 = vPoiCur.Desc0;
vPoi.ElevTOF = vPoiCur.ElevTOF;
vPoi.ElevTOW = vPoiCur.ElevTOW;
}
varpoi.Add(vPoi);
}
} while (dblSta < dblStaEnd);
var sortPOI = from p in varpoi
orderby p.Station ascending
select p;
varpoi = varpoi.sortPOIbyStation();
int n = 0;
List <POI> varPoiTmp = new List <POI>();
for (int j = 0; j < varpoi.Count; j++)
{
if (varpoi[j].Desc0 == "BC")
{
n = j;
do
{
n += 1;
if (varpoi[n].Desc0 != "EC" & varpoi[n].Desc0 != "BC")
{
boolEC = false;
}
else
{
break;
}
} while (true);
//----------------------------------------------------------------------------------
int p = 0;
for (p = j; p < n; p++)
{
varPoiTmp.Add(varpoi[j]);
double dblStaBeg0 = getNominalStation(varpoi[p].Station, dblInterval0 / 2);
do
{
if (dblStaBeg0 - varpoi[p].Station > dblTolerance && varpoi[p + 1].Station - dblStaBeg0 > dblTolerance)
{
varPoiTmp.Add(new POI {
Station = dblStaBeg0, ClassObj = fStake.ClassObj
});
}
else if (varpoi[p + 1].Station - dblStaBeg0 <= dblTolerance)
{
varPoiTmp.Add(varpoi[p + 1]);
break;
}
dblStaBeg0 += dblInterval0 / 2;
} while (true);
}
j = p;
}
else
{
varPoiTmp.Add(varpoi[j]);
}
}
var sortTmp = from p in varPoiTmp
orderby p.Station ascending
select p;
varpoi = varPoiTmp.sortPOIbyStation();
if (varpoi[varpoi.Count - 1].Station > dblStaEnd)
{
varpoi.RemoveAt(varpoi.Count - 1);
}
//END GET NOMINAL STATIONS
//BEGIN GET EVEN INTERVALS
}
else//not fStake.optYes
{
boolBC = false;
boolEC = true;
if (varpoi[0].Desc0 == "BC")
{
boolBC = true;
boolEC = false;
}
for (int i = 1; i < varpoi.Count; i++)
{
switch (varpoi[i].Desc0)
{
case "BC":
case "PCC":
boolBC = true;
if (boolEC)
{
getStationsOnTangent(ref i, varpoi, dblInterval0, dblTolerance);
}
boolEC = false;
break;
case "EC":
boolBC = false;
boolEC = true;
break;
default:
if (!boolBC & boolEC)
{
getStationsOnTangent(ref i, varpoi, dblInterval0, dblTolerance);
}
break;
}
} //END GET EVEN INTERVALS
} //END ON-STATION
}
getNestedEntities(ObjectId idAlign, ref List <POI> pois, BlockTableRecord btrXRefDbModelSpace)
{
Alignment align = (Alignment)idAlign.getEnt();
double alignLength = align.Length;
string strNameStakeObject = fStake.NameStakeObject;
string strLayerName = strNameStakeObject + "-TEMP";
Layer.manageLayers(strLayerName);
Layer.manageLayer(strLayerName, 2);
Point3d varPntBeg, varPntEnd;
List <ObjectId> ids = new List <ObjectId>();
foreach (ObjectId id in btrXRefDbModelSpace)
{
Entity ent = id.getEnt();
int intPos = ent.Layer.IndexOf("|");
string strLayerObj = ent.Layer.Substring(intPos + 1);
List <string> layers = new List <string> {
strNameStakeObject, "CURB", "FL", "GB", "EC", "BLDG", "SEWER", "WATER", "SD-CL", "PROP-WAT"
};
if (layers.Contains(strLayerObj))
{
switch (ent.GetType().ToString())
{
case "Line":
ids.Add(ent.ObjectId);
break;
case "Arc":
ids.Add(ent.ObjectId);
break;
case "Polyline":
ids.Add(ent.ObjectId);
break;
}
}
}
double dblStationBeg = 0, dblStationEnd = 0;
double dblOffsetBeg = 0, dblOffsetEnd = 0;
color = new Color();
color = Color.FromColorIndex(ColorMethod.ByBlock, 4);
for (int i = 0; i < ids.Count; i++)
{
ObjectId id = ids[i];
Entity ent = id.getEnt();
id.changeProp(color, ent.Layer, LineWeight.LineWeight100);
int intPos = ent.Layer.IndexOf("|");
string strLayerObj = ent.Layer.Substring(intPos + 1);
if (strLayerObj == strNameStakeObject)
{
switch (ent.GetType().Name)
{
case "Arc":
Arc objArc = (Arc)ent;
varPntBeg = objArc.StartPoint;
varPntEnd = objArc.EndPoint;
align.StationOffset(varPntBeg.X, varPntBeg.Y, ref dblStationBeg, ref dblOffsetBeg);
align.StationOffset(varPntEnd.X, varPntEnd.Y, ref dblStationEnd, ref dblOffsetEnd);
break;
case "Line":
Line line = (Line)ent;
varPntBeg = line.StartPoint;
varPntEnd = line.EndPoint;
align.StationOffset(varPntBeg.X, varPntBeg.Y, ref dblStationBeg, ref dblOffsetBeg);
align.StationOffset(varPntEnd.X, varPntEnd.Y, ref dblStationEnd, ref dblOffsetEnd);
break;
case "Polyline":
Polyline poly = (Polyline)ent;
varPntBeg = poly.StartPoint;
varPntEnd = poly.EndPoint;
align.StationOffset(varPntBeg.X, varPntBeg.Y, ref dblStationBeg, ref dblOffsetBeg);
align.StationOffset(varPntEnd.X, varPntEnd.Y, ref dblStationEnd, ref dblOffsetEnd);
break;
}
if (dblStationBeg >= align.StartingStation & dblStationBeg <= align.EndingStation)
{
if (dblStationEnd >= align.StartingStation & dblStationEnd <= align.EndingStation)
{
if (System.Math.Abs(dblOffsetBeg) < 0.1)
{
POI poi = new POI();
poi.Station = Math.roundDown3(dblStationBeg);
poi.ClassObj = fStake.ClassObj;
poi.Desc0 = "TEE";
poi.CrossDesc = "TEE";
if (dblOffsetEnd > 0)
{
poi.Side = 1;
}
else
{
poi.Side = -1;
}
pois.Add(poi);
}
else if (System.Math.Abs(dblOffsetEnd) < 0.1)
{
POI poi = new POI();
poi.Station = Math.roundDown3(dblStationEnd);
poi.ClassObj = fStake.ClassObj;
poi.Desc0 = "TEE";
poi.CrossDesc = "TEE";
if (dblOffsetBeg > 0)
{
poi.Side = 1;
}
else
{
poi.Side = -1;
}
pois.Add(poi);
}
}
}
}
else
{
List <Point3d> varPntInt = align.intersectWith(ent, false, extend.source);
try
{
for (int n = 0; n <= varPntInt.Count; n++)
{
Point3d pnt3dInt = varPntInt[i];
align.StationOffset(pnt3dInt.X, pnt3dInt.Y, ref dblStationBeg, ref dblOffsetBeg);
POI poi = new POI();
poi.Station = Math.roundDown3(dblStationBeg);
poi.ClassObj = fStake.ClassObj;
poi.Desc0 = strLayerObj;
poi.CrossDesc = strLayerObj;
if (strLayerObj.Contains("SEW") || strLayerObj.Contains("WAT") || strLayerObj.Contains("SD") || strLayerObj.Contains("WTR"))
{
poi.Type = strLayerObj;
}
pois.Add(poi);
}
}
catch (System.Exception)
{
}
}
}
for (int i = 0; i < ids.Count; i++)
{
ids[i].delete();
}
}
public static void reverseAlign(ObjectId idAlign)
{
List <POI> varpoi = null;
List <POI> varPOI_ORG = null;
List <POI> varPOI_Temp = null;
ProfilePVICollection objPVIs = null;
string nameLayer = idAlign.getLayer();
TypedValue[] tvs = new TypedValue[9];
tvs.SetValue(new TypedValue((int)DxfCode.Operator, "<OR"), 0);
tvs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(typeof(Polyline)).DxfName), 1);
tvs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(typeof(Leader)).DxfName), 2);
tvs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(typeof(DBText)).DxfName), 3);
tvs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(typeof(MText)).DxfName), 4);
tvs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(typeof(Circle)).DxfName), 5);
tvs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(typeof(Dimension)).DxfName), 6);
tvs.SetValue(new TypedValue((int)DxfCode.Operator, "OR>"), 7);
tvs.SetValue(new TypedValue((int)DxfCode.LayerName, nameLayer), 8);
SelectionSet ss = Select.buildSSet(tvs);
ObjectId[] ids = ss.GetObjectIds();
foreach (ObjectId id in ids)
{
id.delete();
}
Alignment objAlign = (Alignment)idAlign.getEnt();
double dblLenAlign = objAlign.Length;
switch (fStake.ClassObj)
{
case "BLDG":
Profile profCPNT = Prof.getProfile(idAlign, "CPNT");
objPVIs = profCPNT.PVIs;
break;
case "CURB":
Profile profFLOWLINE = Prof.getProfile(idAlign, "FLOWLINE");
objPVIs = profFLOWLINE.PVIs;
break;
case "FL":
profCPNT = Prof.getProfile(idAlign, "CPNT");
objPVIs = profCPNT.PVIs;
break;
case "SEWER":
case "WTR":
profCPNT = Prof.getProfile(idAlign, "CPNT");
objPVIs = profCPNT.PVIs;
break;
case "ALIGN":
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Object is an existing design alignment - exiting");
return;
}
int j = objPVIs.Count;
for (int i = 0; i < j; i++)
{
varPOI_Temp[i].Station = Math.roundDown3(dblLenAlign - (objPVIs[i].Station - objAlign.StartingStation)) + objAlign.StartingStation;
//starting station is always 100
varPOI_Temp[i].Elevation = objPVIs[i].Elevation;
}
objAlign.Reverse();
varpoi = fStake.POI_CALC;
//reverse varPOI stationing
//need all POIs for descriptions
for (int i = 0; i < varpoi.Count; i++)
{
varpoi[i].Station = Math.roundDown3(dblLenAlign - (varpoi[i].Station - objAlign.StartingStation)) + objAlign.StartingStation;
//starting station is always 100
varpoi[i].Side = varpoi[i].Side * -1;
switch (varpoi[i].Desc0)
{
case "AP":
if (varpoi[i].isRightHand)
{
varpoi[i].AngDir = varpoi[i].AngDir + varpoi[i].AngDelta;
}
else
{
varpoi[i].AngDir = varpoi[i].AngDir - varpoi[i].AngDelta;
}
varpoi[i].isRightHand = !varpoi[i].isRightHand;
break;
case "BC":
varpoi[i].Desc0 = "EC";
varpoi[i].DescX = varpoi[i].DescX.Replace("BC", "EC");
break;
case "EC":
varpoi[i].Desc0 = "BC";
varpoi[i].DescX = varpoi[i].DescX.Replace("EC", "BC");
break;
}
}
varPOI_ORG = fStake.POI_ORG;
//reverse varPOI_ORG stationing
//need all POIs for descriptions
for (int i = 0; i < varPOI_ORG.Count; i++)
{
varPOI_ORG[i].Station = Math.roundDown3(dblLenAlign - (varPOI_ORG[i].Station - objAlign.StartingStation)) + objAlign.StartingStation;
//starting station is always 100
}
List <POI> poiTmp = new List <POI>();
var sortPOI = from p in varpoi
orderby p.Station ascending
select p;
foreach (var p in sortPOI)
{
poiTmp.Add(p);
}
varpoi = poiTmp;
poiTmp = new List <POI>();
var sortPOI_ORG = from n in varPOI_ORG
orderby n.Station ascending
select n;
foreach (var n in sortPOI_ORG)
{
poiTmp.Add(n);
}
varPOI_ORG = poiTmp;
poiTmp = new List <POI>();
var sortPOI_Temp = from t in varPOI_Temp
orderby t.Station ascending
select t;
foreach (var t in sortPOI_Temp)
{
poiTmp.Add(t);
}
varPOI_Temp = poiTmp;
j = varpoi.Count;
varpoi[0].DescX = varpoi[0].DescX.Replace("END", "BEG");
varpoi[j].DescX = varpoi[j].DescX.Replace("BEG", "END");
ObjectId idTable = Stake_Table.getTableId(idAlign);
Stake_Table.addTableData(idTable, varpoi);
fStake.POI_CALC = varpoi;
fStake.POI_ORG = varPOI_ORG;
switch (fStake.ClassObj)
{
case "BLDG":
Stake_AddProfile.makeProfile(idAlign, varPOI_Temp, "STAKE", "ByLayout", true);
Stake_UpdateProfile.updateProfile(idAlign, (fStake.POI_ORG), "STAKE", true, "STAKE");
break;
case "CURB":
Stake_AddProfile.makeProfile(idAlign, varPOI_Temp, "CURB", "ByLayout", true);
Stake_UpdateProfile.updateProfile(idAlign, (fStake.POI_ORG), "FLOWLINE", true, "ORG");
break;
case "FL":
Stake_AddProfile.makeProfile(idAlign, varPOI_Temp, "FLOWLINE", "BySurface", true);
Stake_UpdateProfile.updateProfile(idAlign, (fStake.POI_ORG), "STAKE", true, "ORG");
break;
case "WTR":
Stake_AddProfile.makeProfile(idAlign, varPOI_Temp, "STAKE", "BySurface", true);
Stake_UpdateProfile.updateProfile(idAlign, (fStake.POI_ORG), "CPNT", true, "ORG");
Stake_UpdateProfile.updateProfile(idAlign, varpoi, "STAKE", false, "STAKE");
break;
}
}
getNestedPoints(ObjectId idAlign, ref List <POI> varpoi, BlockTableRecord objXRefDbModelSpace, string strSource)
{
Alignment objAlign = (Alignment)idAlign.getEnt();
string strNameStakeObject = fStake.NameStakeObject;
double dblToleranceLength = 0.15;
double dblToleranceAngle = PI;
Point2d varPntRef = objAlign.ReferencePoint;
string strFilter = "";
if (strSource.Contains("GCAL")
)
{
strFilter = "*CPNT*";
}
else
{
strFilter = "*";
}
List <string> strPntNums = new List <string>();
double dblStation = 0, dblOffset = 0;
ResultBuffer rb = null;
TypedValue[] tvs = null;
List <POI> varPOI_PNTs = new List <POI>();
foreach (ObjectId id in objXRefDbModelSpace)
{
bool boolAdd = false;
Entity objXRefObj = id.getEnt();
if (objXRefObj is CogoPoint)
{
CogoPoint objPnt = (CogoPoint)objXRefObj;
Debug.Print(objPnt.PointNumber.ToString());
if (objPnt.Layer.Contains(strFilter))
{
strPntNums.Add(objPnt.PointNumber.ToString());
if (strSource == "GCAL")
{
rb = id.getXData("STAKE");
tvs = rb.AsArray();
}
objAlign.StationOffset(objPnt.Easting, objPnt.Northing, ref dblStation, ref dblOffset);
Debug.Print(objPnt.Easting + "," + objPnt.Northing);
Point2d pnt2d = new Point2d(objPnt.Location.X, objPnt.Location.Y);
if (System.Math.Abs(dblOffset) < dblToleranceLength)
{
if (dblStation >= objAlign.StartingStation && dblStation <= objAlign.EndingStation)
{
boolAdd = true;
}
}
else if (pnt2d.isEqual(varPntRef, dblToleranceLength))
{
Point3d pnt3d = new Point3d(objPnt.Easting, objPnt.Northing, 0);
double dblAngle1 = Math.roundDown3(pnt2d.getDirection(varPntRef));
AlignmentEntity objAlignEnt = objAlign.Entities.EntityAtId(objAlign.Entities.FirstEntity);
switch (objAlignEnt.EntityType)
{
case AlignmentEntityType.Arc:
AlignmentArc objAlignEntArc = (AlignmentArc)objAlignEnt;
double dblangle2 = 0;
if (objAlignEntArc.Clockwise)
{
dblangle2 = objAlignEntArc.StartDirection - PI / 2 + objAlignEntArc.Delta / 2;
}
else
{
dblangle2 = objAlignEntArc.StartDirection + PI / 2 - objAlignEntArc.Delta / 2;
}
if (System.Math.Abs(dblAngle1 - dblangle2) < dblToleranceAngle)
{
boolAdd = true;
dblStation = objAlign.StartingStation;
}
else if (System.Math.Abs(Math.roundDown3(dblAngle1 - 2 * PI) - dblangle2) < dblToleranceAngle)
{
boolAdd = true;
dblStation = objAlign.StartingStation;
}
break;
case AlignmentEntityType.Line:
AlignmentLine objAlignEntTan = (AlignmentLine)objAlignEnt;
dblangle2 = Math.roundDown3((objAlignEntTan.Direction));
if (System.Math.Abs(dblAngle1 - dblangle2) < dblToleranceAngle)
{
boolAdd = true;
dblStation = objAlign.StartingStation;
}
break;
}
}
else
{
boolAdd = false;
}
}
if (boolAdd == true)
{
POI varPOI_PNT = new POI();
varPOI_PNT.Station = Math.roundDown3(dblStation);
varPOI_PNT.PntNum = objPnt.PointNumber.ToString();
varPOI_PNT.Elevation = System.Math.Round(objPnt.Elevation, 3);
if (strSource != "WALLDESIGN")
{
varPOI_PNT.ClassObj = fStake.ClassObj;
}
varPOI_PNT.OFFSET = System.Math.Round(dblOffset, 2);
varPOI_PNT.PntSource = strSource;
if (strSource == "GCAL")
{
try
{
if (isTG(objXRefDbModelSpace, tvs[1].Value.ToString().stringToHandle()))
{
varPOI_PNT.Desc0 = "TG";
}
}
catch (System.Exception)
{
varPOI_PNT.Desc0 = "PNT";
}
}
else if (strSource == "WALLDESIGN")
{
objAlign.StationOffset(objPnt.Easting, objPnt.Northing, ref dblStation, ref dblOffset);
varPOI_PNT.OFFSET = System.Math.Round(dblOffset, 2);
varPOI_PNT.Desc0 = string.Format("{0} {0} {2}", objPnt.RawDescription, varPOI_PNT.OFFSET, varPOI_PNT.Elevation);
varPOI_PNT.PntSource = "TOPO";
}
else
{
varPOI_PNT.Desc0 = "PNT";
}
varPOI_PNTs.Add(varPOI_PNT);
}
}
}
if (varPOI_PNTs.Count > 0)
{
var sortSta = from p in varPOI_PNTs
orderby p.Station ascending
select p;
List <POI> poiTmp = new List <POI>();
foreach (var p in sortSta)
{
poiTmp.Add(p);
}
Stake_Util.removeDuplicatePoints(ref poiTmp);
varPOI_PNTs = poiTmp;
if (strSource != "WALLDESIGN")
{
fStake.POI_PNTs = varPOI_PNTs;
}
if (varPOI_PNTs[0].Desc0 != "NOTHING")
{
for (int i = 0; i < varPOI_PNTs.Count; i++)
{
varpoi.Add(varPOI_PNTs[i]);
}
}
poiTmp = varpoi;
sortSta = from p in poiTmp
orderby p.Station ascending
select p;
varpoi = new List <POI>();
foreach (var p in sortSta)
{
varpoi.Add(p);
}
return(true);
}
return(false);
}
getAnglePoints(ObjectId idAlign, ref List <POI> varpoi)
{
POI vPoi = new POI();
bool boolClosed = false;
string strClass = fStake.ClassObj;
Profile objProfile = null;
switch (strClass)
{
case "CURB":
objProfile = Prof.getProfile(idAlign, "FLOWLINE");
break;
case "FL":
objProfile = Prof.getProfile(idAlign, "STAKE");
break;
case "WTR":
objProfile = Prof.getProfile(idAlign, "CPNT");
break;
case "BLDG":
vPoi = new POI();
break;
}
Alignment objAlign = (Alignment)idAlign.getEnt();
AlignmentEntityCollection objAlignEnts = objAlign.Entities;
double dblElev = 0;
bool isRightHand = false;
AlignmentEntity objAlignEnt0 = null;
AlignmentEntity objAlignEntX = null;
AlignmentLine objAlignTan0 = null;
AlignmentLine objAlignTanX = null;
AlignmentArc objAlignArc0 = null;
AlignmentArc objAlignArcX = null;
if (objAlignEnts.Count > 1)
{
for (int i = 0; i < objAlignEnts.Count - 1; i++)
{
objAlignEnt0 = objAlignEnts[i + 0];
objAlignEntX = objAlignEnts[i + 1];
if (objAlignEnt0.EntityType == AlignmentEntityType.Line)
{
objAlignTan0 = (AlignmentLine)objAlignEnt0;
if (objAlignEntX.EntityType == AlignmentEntityType.Line)
{
objAlignTanX = (AlignmentLine)objAlignEntX;
double dblAng0 = objAlignTan0.StartPoint.getDirection(objAlignTan0.EndPoint);
double dblAngX = objAlignTanX.StartPoint.getDirection(objAlignTanX.EndPoint);
if (System.Math.Round(dblAng0, 3) != System.Math.Round(dblAngX, 3))
{
Point3d pnt3d1 = new Point3d(objAlignTan0.StartPoint.X, objAlignTan0.StartPoint.Y, 0);
Point3d pnt3d2 = new Point3d(objAlignTan0.EndPoint.X, objAlignTan0.EndPoint.Y, 0);
Point3d pnt3d3 = new Point3d(objAlignTanX.EndPoint.X, objAlignTanX.EndPoint.Y, 0);
double dblStation = System.Math.Round(objAlignTanX.StartStation, 3);
// Debug.Print i
double dblAngDelta = Geom.getAngle3Points(pnt3d1, pnt3d2, pnt3d3);
double dblAngDir = dblAngX;
Vector3d v3d1 = pnt3d2 - pnt3d1;
Vector3d v3d2 = pnt3d3 - pnt3d2;
Vector3d v3dC = v3d1.CrossProduct(v3d2);
if (v3dC.Z > 0)
{
isRightHand = true;
}
else
{
isRightHand = false;
}
switch (strClass)
{
case "CURB":
case "FL":
case "WTR":
try
{
dblElev = System.Math.Round(objProfile.ElevationAt(dblStation), 3);
}
catch (System.Exception)
{
}
break;
}
POI vpoi = new POI();
vpoi.Station = dblStation;
vpoi.Desc0 = "AP";
vpoi.ClassObj = strClass;
vpoi.AngDelta = dblAngDelta;
vpoi.AngDir = dblAngDir;
vpoi.isRightHand = isRightHand;
vpoi.Elevation = dblElev;
varpoi.Add(vpoi);
varpoi = varpoi.sortPOIbyStation();
}
}
}
}
}
objAlignEnt0 = objAlignEnts[objAlignEnts.FirstEntity - 1];
objAlignEntX = objAlignEnts[objAlignEnts.LastEntity - 1];
bool boolArc0 = false;
bool boolArcX = false;
bool boolTan0 = false;
bool boolTanX = false;
Point2d pnt2dBeg = Point2d.Origin, pnt2dEnd = Point2d.Origin;
if (objAlignEnt0.EntityType == AlignmentEntityType.Arc)
{
objAlignArc0 = (AlignmentArc)objAlignEnt0;
pnt2dBeg = objAlignArc0.StartPoint;
boolArc0 = true;
}
else
{
objAlignTan0 = (AlignmentLine)objAlignEnt0;
pnt2dBeg = objAlignTan0.StartPoint;
boolTan0 = true;
}
if (objAlignEntX.EntityType == AlignmentEntityType.Arc)
{
objAlignArcX = (AlignmentArc)objAlignEntX;
pnt2dEnd = objAlignArcX.StartPoint;
boolArcX = true;
}
else
{
objAlignTanX = (AlignmentLine)objAlignEntX;
pnt2dEnd = objAlignTanX.StartPoint;
boolTanX = true;
}
if (System.Math.Round(pnt2dEnd.X, 2) == System.Math.Round(pnt2dBeg.X, 2))
{
if (System.Math.Round(pnt2dEnd.Y, 2) == System.Math.Round(pnt2dBeg.Y, 2))
{
boolClosed = true;
varpoi[0].isClosed = true;
if (boolArc0 & boolArcX)
{
varpoi[0].Desc0 = "PCC";
}
else if (boolArc0 & boolTanX)
{
//do nothing
}
else if (boolTan0 & boolArcX)
{
varpoi[0].Desc0 = "EC";
}
else if (boolTan0 & boolTanX)
{
Point3d pnt3d1 = new Point3d(objAlignTanX.StartPoint.X, objAlignTanX.StartPoint.Y, 0);
Point3d pnt3d2 = new Point3d(objAlignTanX.EndPoint.X, objAlignTanX.EndPoint.Y, 0);
Point3d pnt3d3 = new Point3d(objAlignTan0.EndPoint.X, objAlignTan0.EndPoint.Y, 0);
double dblAngDelta = Geom.getAngle3Points(pnt3d1, pnt3d2, pnt3d3);
double dblAng0 = objAlignTan0.StartPoint.getDirection(objAlignTan0.EndPoint);
double dblAngDir = dblAng0;
Vector3d v3d1 = pnt3d2 - pnt3d1;
Vector3d v3d2 = pnt3d3 - pnt3d2;
Vector3d v3dC = v3d1.CrossProduct(v3d2);
if (v3dC.Z > 0)
{
isRightHand = true;
}
else
{
isRightHand = false;
}
if (strClass == "BLDG")
{
varpoi[0].Station = objAlignTan0.StartStation;
varpoi[0].Desc0 = "AP";
varpoi[0].DescX = "BEG AP";
varpoi[0].ClassObj = strClass;
varpoi[0].AngDelta = dblAngDelta;
varpoi[0].AngDir = dblAngDir;
}
else
{
varpoi[0].Desc0 = "AP";
varpoi[0].DescX = "BEG AP";
varpoi[0].AngDelta = dblAngDelta;
varpoi[0].AngDir = dblAngDir;
}
}
}
}
if (boolClosed)
{
int j = varpoi.Count - 1;
if (varpoi[j].Station != Math.roundDown3((objAlign.EndingStation)))
{
POI vpoi = new POI();
vpoi.Station = Math.roundDown3((objAlign.EndingStation));
vpoi.Elevation = varpoi[0].Elevation;
if (strClass == "BLDG")
{
vpoi.DescX = varpoi[0].DescX;
}
else
{
vpoi.DescX = "END AP";
}
vpoi.Desc0 = "AP";
vpoi.ClassObj = strClass;
vpoi.isClosed = true;
varpoi.Add(vpoi);
}
else
{
POI vpoi = varpoi[j];
vpoi.Elevation = varpoi[0].Elevation;
vpoi.Desc0 = "AP";
if (strClass == "BLDG")
{
vpoi.DescX = varpoi[0].DescX;
}
vpoi.DescX = "END AP";
vpoi.ClassObj = strClass;
vpoi.isClosed = true;
varpoi[j] = vpoi;
}
}
}
stakeGridPoints(ObjectId idAlign, List <POI> varPOI_STAKE, double staBeg = 0, double staEnd = 0, int side = 0, long begNum = 30000)
{
Alignment objAlign = (Alignment)idAlign.getEnt();
double dblStation = 0, dblOffset = 0;
if ((side == 0))
{
if (double.Parse(fGrid.tbxOffsetH.Text) != 0)
{
PromptStatus ps;
bool escape = true;
Point3d varPntPick = UserInput.getPoint("Select side to place stake points: <ESC to Cancel>", Pub.pnt3dO, out escape, out ps, osMode: 8);
if (escape)
{
return;
}
objAlign.StationOffset(varPntPick.X, varPntPick.Y, ref dblStation, ref dblOffset);
if (System.Math.Abs(dblOffset) > 20.0)
{
DialogResult varResponse = MessageBox.Show(string.Format("\nPoint selected is more than 20' from Alignment: {0} \nContinue?", objAlign.Name, MessageBoxButtons.YesNo));
if (varResponse == DialogResult.No)
{
return;
}
}
if (dblOffset < 0)
{
side = -1;
}
else
{
side = 1;
}
fStake.Side = side;
}
else
{
fStake.Side = 1;
}
}
else
{
fStake.Side = side;
}
fStake.STAKE_LAYER = fGrid.tbxOffsetH.Text + "-OS-" + objAlign.Name;
dblOffset = double.Parse(fGrid.tbxOffsetH.Text);
string strName = fStake.NameStakeObject;
double dblStaBeg = Math.roundDown3((objAlign.StartingStation));
double dblStaEnd = Math.roundDown3((objAlign.EndingStation));
uint lngPntNumBeg = Stake_Util.getBegPntNum();
fStake.NextPntNum = lngPntNumBeg;
CogoPointCollection cgPnts = CivilApplication.ActiveDocument.CogoPoints;
fStake.POI_STAKED = new List <POI>();
//**********PROCESS varPOI_STAKE*********************
for (int i = 0; i <= varPOI_STAKE.Count; i++)
{
if (varPOI_STAKE[i].DescX == "")
{
POI vPOI_STAKE = varPOI_STAKE[i];
vPOI_STAKE.DescX = vPOI_STAKE.Desc0;
varPOI_STAKE[i] = vPOI_STAKE;
}
if (i == varPOI_STAKE.Count - 1)
{
break;
}
double dblElev = varPOI_STAKE[i].Elevation;
switch (varPOI_STAKE[i].Desc0)
{
case "AP":
switch (side)
{
case 1:
//right side
//counterclockwise
if (varPOI_STAKE[i].isRightHand)
{
if (fGrid.optPBC.Checked)
{
Stake_Calc.doAnglePointOUT(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, side, dblOffset);
}
else if (fGrid.optRBC.Checked)
{
Stake_Calc.doAnglePointOUT_RBC(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, side, dblOffset);
}
//clockwise
}
else
{
Stake_Calc.doAnglePointIN(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, side, dblOffset);
}
break;
case -1:
//left side
//counterclockwise
if (varPOI_STAKE[i].isRightHand)
{
Stake_Calc.doAnglePointIN(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, side, dblOffset);
//clockwise
}
else
{
if (fGrid.optPBC.Checked)
{
Stake_Calc.doAnglePointOUT(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, side, dblOffset);
}
else if (fGrid.optRBC.Checked)
{
Stake_Calc.doAnglePointOUT_RBC(idAlign, dblElev, varPOI_STAKE[i].Station, varPOI_STAKE[i].AngDelta, varPOI_STAKE[i].AngDir, varPOI_STAKE[i].DescX, strName, side, dblOffset);
}
}
break;
}
break;
default:
string strDesc = varPOI_STAKE[i].DescX;
double dblEasting = 0, dblNorthing = 0;
try
{
objAlign.PointLocation(varPOI_STAKE[i].Station, dblOffset * side, ref dblEasting, ref dblNorthing);
}
catch (IndexOutOfRangeException)
{
try
{
objAlign.PointLocation(varPOI_STAKE[i].Station - 0.01, dblOffset * side, ref dblEasting, ref dblNorthing);
}
catch (IndexOutOfRangeException)
{
objAlign.PointLocation(varPOI_STAKE[i].Station + 0.01, dblOffset * side, ref dblEasting, ref dblNorthing);
}
}
Point3d dblPnt = new Point3d(dblEasting, dblNorthing, varPOI_STAKE[i].Elevation);
string strOffset = dblOffset.ToString();
Stake_Calc.setOffsetPoint(dblPnt, strOffset, strName, strDesc, idAlign, varPOI_STAKE[i].Station);
break;
}
}
List <POI> varPOI_STAKED = fStake.POI_STAKED;
int k = varPOI_STAKED.Count - 1;
uint lngPntNumEnd = uint.Parse(varPOI_STAKED[k].PntNum);
TypedValue[] tvs = new TypedValue[4] {
new TypedValue(1001, "STAKE"),
new TypedValue(1071, lngPntNumBeg),
new TypedValue(1071, lngPntNumEnd),
new TypedValue(1000, fStake.STAKE_LAYER)
};
idAlign.setXData(tvs, "STAKE");
CgPnt_Group.updatePntGroup("SPNT");
Stake_UpdateProfile.updateProfile(idAlign, (fStake.POI_STAKED), "STAKE", true, "STAKED");
bool exists = false;
ObjectId idDict = Dict.getNamedDictionary("STAKE_PNTS", out exists);
List <Point3d> dblPnts = new List <Point3d>();
Point3d pnt3d = Pub.pnt3dO;
for (int p = 0; p < varPOI_STAKED.Count; p++)
{
ObjectId idPnt = BaseObjs._civDoc.CogoPoints.GetPointByPointNumber(uint.Parse(varPOI_STAKED[p].PntNum));
pnt3d = idPnt.getCogoPntCoordinates();
dblPnts.Add(pnt3d);
ResultBuffer rb = new ResultBuffer {
new TypedValue(1000, idPnt.getCogoPntNumber().ToString()),
new TypedValue(1005, idPnt.getHandle().ToString())
};
Dict.addXRec(idDict, idPnt.ToString(), rb);
}
dblPnts.Add(dblPnts[0]);
Draw.addPoly(dblPnts, fStake.STAKE_LAYER, 9);
Misc.logUsage("STAKE", (lngPntNumEnd - lngPntNumBeg + 1));
}
