internal static global::Topologic.Shell ShellByMesh(Mesh bhomMesh)
{
List <global::Topologic.Face> faces = new List <global::Topologic.Face>();
foreach (BH.oM.Geometry.Face bhomFace in bhomMesh.Faces)
{
List <Point> bhomControlPoints = new List <Point>();
Point p1 = bhomMesh.Vertices[bhomFace.A];
bhomControlPoints.Add(p1);
Point p2 = bhomMesh.Vertices[bhomFace.B];
bhomControlPoints.Add(p2);
Point p3 = bhomMesh.Vertices[bhomFace.C];
bhomControlPoints.Add(p3);
Point p4 = null;
if (bhomFace.D >= 0)
{
p4 = bhomMesh.Vertices[bhomFace.D];
bhomControlPoints.Add(p4);
}
bhomControlPoints.Add(p1); // close the wire
Polyline bhomBoundary = new Polyline {
ControlPoints = bhomControlPoints
};
BH.oM.Geometry.PlanarSurface bhomPlanarSurface = new BH.oM.Geometry.PlanarSurface(bhomBoundary, null);
global::Topologic.Face face = Create.FaceByPlanarSurface(bhomPlanarSurface);
faces.Add(face);
}
return(global::Topologic.Shell.ByFaces(faces, 0.0001));
}
/***************************************************/
private static BHG.PlanarSurface ToBHoMPlanarSurface(this RHG.BrepFace face)
{
RHG.Surface rhSurf = face.UnderlyingSurface();
if (rhSurf == null)
{
return(null);
}
BHG.PlanarSurface bhs = rhSurf.FromRhino() as BHG.PlanarSurface;
List <BHG.ICurve> internalBoundaries = new List <BHG.ICurve>();
BHG.ICurve externalBoundary = bhs.ExternalBoundary;
foreach (RHG.BrepLoop loop in face.Loops)
{
if (loop.LoopType == RHG.BrepLoopType.Inner)
{
internalBoundaries.Add(new BHG.PolyCurve {
Curves = loop.Trims.Select(x => rhSurf.Pushup(x, BHG.Tolerance.Distance).FromRhino()).ToList()
});
}
else if (loop.LoopType == RHG.BrepLoopType.Outer)
{
externalBoundary = new BHG.PolyCurve {
Curves = loop.Trims.Select(x => rhSurf.Pushup(x, BHG.Tolerance.Distance).FromRhino()).ToList()
}
}
;
}
return(BH.Engine.Geometry.Create.PlanarSurface(externalBoundary, internalBoundaries));
}
internal static global::Topologic.Face FaceBySurface(ISurface bhomSurface)
{
BH.oM.Geometry.PlanarSurface bhomPlanarSurface = bhomSurface as BH.oM.Geometry.PlanarSurface;
if (bhomPlanarSurface != null)
{
return(FaceByPlanarSurface(bhomPlanarSurface));
}
throw new NotImplementedException("This type of BHoM surface is not yet supported.");
}
internal static BH.oM.Geometry.PlanarSurface PlanarSurface(global::Topologic.Face face)
{
Polyline bhomExternalBoundary = Convert.Polyline(face.ExternalBoundary);
List <ICurve> bhomInternalBoundaries = new List <ICurve>();
List <global::Topologic.Wire> internalBoundaries = face.InternalBoundaries;
foreach (global::Topologic.Wire internalBoundary in internalBoundaries)
{
bhomInternalBoundaries.Add(Convert.Polyline(internalBoundary));
}
BH.oM.Geometry.PlanarSurface planarSurface = new BH.oM.Geometry.PlanarSurface(bhomExternalBoundary, bhomInternalBoundaries);
return(planarSurface);
}
internal static global::Topologic.Face FaceByPlanarSurface(BH.oM.Geometry.PlanarSurface bhomPlanarSurface)
{
ICurve bhomExternalBoundary = bhomPlanarSurface.ExternalBoundary;
List <ICurve> bhomInternalBoundaries = bhomPlanarSurface.InternalBoundaries;
global::Topologic.Wire externalBoundary = Create.WireByCurve(bhomExternalBoundary);
List <global::Topologic.Wire> internalBoundaries = new List <global::Topologic.Wire>();
if (bhomInternalBoundaries != null)
{
foreach (ICurve bhomInternalBoundary in bhomInternalBoundaries)
{
global::Topologic.Wire internalBoundary = Create.WireByCurve(bhomInternalBoundary);
internalBoundaries.Add(internalBoundary);
}
}
return(global::Topologic.Face.ByExternalInternalBoundaries(externalBoundary, internalBoundaries));
}
/***************************************************/
public static RHG.Brep ToRhino(this BHG.PlanarSurface planarSurface)
{
if (planarSurface == null || planarSurface.ExternalBoundary == null)
{
return(null);
}
RHG.Curve externalCurve = planarSurface.ExternalBoundary.IToRhino();
if (externalCurve == null || !externalCurve.IsPlanar(BHG.Tolerance.Distance))
{
return(null);
}
List <RHG.Curve> rhCurves = new List <RHG.Curve>();
if (planarSurface.InternalBoundaries != null)
{
rhCurves.AddRange(planarSurface.InternalBoundaries.Select(c => c.IToRhino()).Where(c => c.IsPlanar(BHG.Tolerance.Distance)).ToList());
if (rhCurves.Count < planarSurface.InternalBoundaries.Count)
{
int skipped = planarSurface.InternalBoundaries.Count - rhCurves.Count;
Reflection.Compute.RecordWarning($"{skipped} internal boundaries skipped due to a failed planarity test.");
}
}
rhCurves.Add(externalCurve);
RHG.Brep[] rhSurfaces = RHG.Brep.CreatePlanarBreps(rhCurves);
if (rhSurfaces == null)
{
return(null);
}
if (rhSurfaces.Length > 1)
{
//If more than one surface is extracted, try boolean difference of the curves to generate the geometry
List <RHG.Curve> inner = new List <RHG.Curve>(rhCurves);
inner.RemoveAt(inner.Count - 1);
RHG.Curve[] difference = RHG.Curve.CreateBooleanDifference(externalCurve, inner);
//Internal and external edges fully overlap -> 0 edges -> empty Brep
if (difference == null || difference.Length == 0)
{
return(null);
}
RHG.Brep[] rhSurfacesFromDifference = RHG.Brep.CreatePlanarBreps(difference);
if (rhSurfacesFromDifference == null)
{
return(null);
}
if (rhSurfacesFromDifference.Length > 1)
{
Reflection.Compute.RecordWarning("Surface edges are not coplanar or their intersection is not empty." +
"The conversion to Rhino results into multiple Breps and only the first brep will be returned.");
}
else if (rhSurfacesFromDifference.Length == 1)
{
Reflection.Compute.RecordWarning("The internal edges overlap with the external." +
"Boolean intersection has been used to try to get out the correct geometry." +
"Topology might have changed for the surface obejct");
return(rhSurfacesFromDifference.FirstOrDefault());
}
}
return(rhSurfaces.FirstOrDefault());
}
/***************************************************/
public static void RenderMeshes(BHG.PlanarSurface surface, Rhino.Display.DisplayPipeline pipeline, DisplayMaterial material)
{
pipeline.DrawBrepShaded(surface.ToRhino(), material);
}
/***************************************************/
public static void RenderWires(BHG.PlanarSurface surface, Rhino.Display.DisplayPipeline pipeline, Color bhColour)
{
pipeline.DrawBrepWires(surface.ToRhino(), bhColour, 0);
}
