/***************************************************/
/**** Public methods ****/
/***************************************************/
public static RoofBase ToRevitRoofBase(this oM.Physical.Elements.Roof roof, Document document, RevitSettings settings = null, Dictionary <Guid, List <int> > refObjects = null)
{
if (roof == null || roof.Location == null || document == null)
{
return(null);
}
PlanarSurface planarSurface = roof.Location as PlanarSurface;
if (planarSurface == null)
{
return(null);
}
RoofBase roofBase = refObjects.GetValue <RoofBase>(document, roof.BHoM_Guid);
if (roofBase != null)
{
return(roofBase);
}
settings = settings.DefaultIfNull();
RoofType roofType = roof.Construction?.ToRevitElementType(document, new List <BuiltInCategory> {
BuiltInCategory.OST_Roofs
}, settings, refObjects) as RoofType;
if (roofType == null)
{
roofType = roof.ElementType(document, settings);
}
if (roofType == null)
{
Compute.ElementTypeNotFoundWarning(roof);
return(null);
}
Level level = document.LevelBelow(roof.Location, settings);
if (level == null)
{
return(null);
}
double elevation = level.Elevation.ToSI(UnitType.UT_Length);
oM.Geometry.Plane plane = BH.Engine.Geometry.Create.Plane(BH.Engine.Geometry.Create.Point(0, 0, elevation), BH.Engine.Geometry.Create.Vector(0, 0, 1));
ICurve curve = planarSurface.ExternalBoundary.IProject(plane);
CurveArray curveArray = Create.CurveArray(curve.IToRevitCurves());
ModelCurveArray modelCurveArray = new ModelCurveArray();
roofBase = document.Create.NewFootPrintRoof(curveArray, level, roofType, out modelCurveArray);
if (roofBase != null)
{
Parameter parameter = roofBase.get_Parameter(BuiltInParameter.ROOF_UPTO_LEVEL_PARAM);
if (parameter != null)
{
parameter.Set(ElementId.InvalidElementId);
}
List <oM.Geometry.Point> controlPoints = planarSurface.ExternalBoundary.IControlPoints();
if (controlPoints != null && controlPoints.Count > 2)
{
SlabShapeEditor slabShapeEditor = roofBase.SlabShapeEditor;
slabShapeEditor.ResetSlabShape();
foreach (oM.Geometry.Point point in controlPoints)
{
if (Math.Abs(point.Z - plane.Origin.Z) > settings.DistanceTolerance)
{
XYZ xyz = point.ToRevit();
slabShapeEditor.DrawPoint(xyz);
}
}
}
}
roofBase.CheckIfNullPush(roof);
if (roofBase == null)
{
return(null);
}
// Copy parameters from BHoM object to Revit element
roofBase.CopyParameters(roof, settings);
// Update the offset in case the level had been overwritten.
double offset = 0;
if (roofBase.LevelId.IntegerValue != level.Id.IntegerValue)
{
Level newLevel = document.GetElement(roofBase.LevelId) as Level;
offset += (level.ProjectElevation - newLevel.ProjectElevation).ToSI(UnitType.UT_Length);
}
roofBase.SetParameter(BuiltInParameter.ROOF_LEVEL_OFFSET_PARAM, offset);
refObjects.AddOrReplace(roof, roofBase);
return(roofBase);
}
/***************************************************/
/**** Public methods ****/
/***************************************************/
public static Floor ToRevitFloor(this oM.Physical.Elements.Floor floor, Document document, RevitSettings settings = null, Dictionary <Guid, List <int> > refObjects = null)
{
if (floor == null || floor.Construction == null || document == null)
{
return(null);
}
Floor revitFloor = refObjects.GetValue <Floor>(document, floor.BHoM_Guid);
if (revitFloor != null)
{
return(revitFloor);
}
PlanarSurface planarSurface = floor.Location as PlanarSurface;
if (planarSurface == null)
{
return(null);
}
settings = settings.DefaultIfNull();
FloorType floorType = floor.Construction?.ToRevitElementType(document, new List <BuiltInCategory> {
BuiltInCategory.OST_Floors
}, settings, refObjects) as FloorType;
if (floorType == null)
{
floorType = floor.ElementType(document, settings);
}
if (floorType == null)
{
Compute.ElementTypeNotFoundWarning(floor);
return(null);
}
double bottomElevation = floor.Location.IBounds().Min.Z;
Level level = document.LevelBelow(bottomElevation.FromSI(UnitType.UT_Length), settings);
oM.Geometry.Plane sketchPlane = new oM.Geometry.Plane {
Origin = new BH.oM.Geometry.Point {
Z = bottomElevation
}, Normal = Vector.ZAxis
};
ICurve curve = planarSurface.ExternalBoundary.IProject(sketchPlane);
CurveArray curveArray = Create.CurveArray(curve.IToRevitCurves());
BH.oM.Geometry.Plane slabPlane = planarSurface.FitPlane();
if (1 - Math.Abs(Vector.ZAxis.DotProduct(slabPlane.Normal)) <= settings.AngleTolerance)
{
revitFloor = document.Create.NewFloor(curveArray, floorType, level, true);
}
else
{
Vector normal = slabPlane.Normal;
if (normal.Z < 0)
{
normal = -slabPlane.Normal;
}
double angle = normal.Angle(Vector.ZAxis);
double tan = Math.Tan(angle);
XYZ dir = normal.Project(oM.Geometry.Plane.XY).ToRevit().Normalize();
BH.oM.Geometry.Line ln = slabPlane.PlaneIntersection(sketchPlane);
XYZ start = ln.ClosestPoint(curveArray.get_Item(0).GetEndPoint(0).PointFromRevit(), true).ToRevit();
Autodesk.Revit.DB.Line line = Autodesk.Revit.DB.Line.CreateBound(start, start + dir);
revitFloor = document.Create.NewSlab(curveArray, level, line, -tan, true);
revitFloor.SetParameter(BuiltInParameter.ELEM_TYPE_PARAM, floorType.Id);
}
revitFloor.CheckIfNullPush(floor);
if (revitFloor == null)
{
return(null);
}
document.Regenerate();
if (planarSurface.InternalBoundaries != null)
{
foreach (ICurve hole in planarSurface.InternalBoundaries)
{
document.Create.NewOpening(revitFloor, Create.CurveArray(hole.IProject(slabPlane).IToRevitCurves()), true);
}
}
foreach (BH.oM.Physical.Elements.IOpening opening in floor.Openings)
{
PlanarSurface openingLocation = opening.Location as PlanarSurface;
if (openingLocation == null)
{
BH.Engine.Reflection.Compute.RecordWarning(String.Format("Conversion of a floor opening to Revit failed because its location is not a planar surface. Floor BHoM_Guid: {0}, Opening BHoM_Guid: {1}", floor.BHoM_Guid, opening.BHoM_Guid));
continue;
}
document.Create.NewOpening(revitFloor, Create.CurveArray(openingLocation.ExternalBoundary.IToRevitCurves()), true);
if (!(opening is BH.oM.Physical.Elements.Void))
{
BH.Engine.Reflection.Compute.RecordWarning(String.Format("Revit allows only void openings in floors, therefore the BHoM opening of type {0} has been converted to a void opening. Floor BHoM_Guid: {1}, Opening BHoM_Guid: {2}", opening.GetType().Name, floor.BHoM_Guid, opening.BHoM_Guid));
}
}
double offset = revitFloor.LookupParameterDouble(BuiltInParameter.FLOOR_HEIGHTABOVELEVEL_PARAM);
// Copy parameters from BHoM object to Revit element
revitFloor.CopyParameters(floor, settings);
// Update the offset in case the level had been overwritten.
if (revitFloor.LevelId.IntegerValue != level.Id.IntegerValue)
{
Level newLevel = document.GetElement(revitFloor.LevelId) as Level;
offset += (level.ProjectElevation - newLevel.ProjectElevation).ToSI(UnitType.UT_Length);
}
revitFloor.SetParameter(BuiltInParameter.FLOOR_HEIGHTABOVELEVEL_PARAM, offset);
refObjects.AddOrReplace(floor, revitFloor);
return(revitFloor);
}