/// <summary>
/// Compares the CSA mask waveform acquisition value should be greater than this value.
///
/// ACQuire:CURRentcount:MASKWfms?
/// </summary>
/// <param name="scope">the SCOPE object</param>
/// <param name="time">Amount of time to wait inbetween taking counts</param>
public void IWaitUntilCSAMaskShowsWfmAcquisitions(ISCOPE scope, string time)
{
int currentWfmAcqCount = 0;
double totalTime = 0;
UTILS.HiPerfTimer Timer1 = new UTILS.HiPerfTimer();
double maxTime = double.Parse(time);
//Error checking for a empty string otherwise, parse as normal
int initialWfmAcqCount = string.IsNullOrWhiteSpace(scope.CSACurrentMaskCount)
? 0
: int.Parse(scope.CSACurrentMaskCount);
// Start the timer, and wait up to the max number of seconds specified for acqs to appear ever 500ms
while ((totalTime < maxTime) && (initialWfmAcqCount == currentWfmAcqCount))
{
Timer1.Start();
scope.GetCSACurrentMaskWfmCount();
//Error checking for a empty string otherwise, parse as normal
currentWfmAcqCount = string.IsNullOrWhiteSpace(scope.CSACurrentMaskCount)
? 0
: int.Parse(scope.CSACurrentMaskCount);
Thread.Sleep(500); // Have to make sure this is between the start/stop commands
Timer1.Stop();
// Add the current interval to the total
totalTime = totalTime + Timer1.Duration;
}
if (initialWfmAcqCount == currentWfmAcqCount)
{
Assert.Fail(totalTime + " sec. passed with no acquisitions counted on CSA scope. Max time allowed was " +
maxTime + " seconds.");
}
}
/// Unkown - 01/01/01
/// <summary>
/// Checks if the AWG adds a certain number of waveforms in the specified time limt
/// </summary>
/// <param name="awg">The AWG the waveforms will be added to</param>
/// <param name="numEntries">The number of waveforms to be added</param>
/// <param name="seconds">Time limit for adding the waveforms</param>
public void WaitForWfmListToAddWfms(IAWG awg, string numEntries, string seconds)
{
// For now going to assume all entries start with 0 as each start with reset Awg
//int currentEntries = awg.waveform_list_size == "" ? 0 : Int16.Parse(awg.waveform_list_size); //Very convenient short if statement fills currentEntries one way or the other
// currentEntries++;
//string nextEntry = currentEntries.ToString();
var timer = new UTILS.HiPerfTimer();
double totalTime = 0;
while ((totalTime < double.Parse(seconds)))
{
timer.Start();
GetNumberOfWaveformListEntries(awg);
if (awg.WaveformListSize == numEntries)
{
return;
}
Thread.Sleep(100); // Have to make sure this is between the start/stop commands
timer.Stop();
// Add the current interval to the total
totalTime = totalTime + timer.Duration;
}
Assert.Fail("Waveform entries were not added in the " + seconds + " second time limit");
}
public void WaitForWfmListToAddWfms(IEXTSOURCE extSource, string numEntries, string seconds)
{
UTILS.HiPerfTimer timer = new UTILS.HiPerfTimer();
double totalTime = 0;
int currentEntries = Int16.Parse(extSource.ExtSrcWfmListSize);
int expectedEntries = Int16.Parse(numEntries) + currentEntries;
while ((totalTime < double.Parse(seconds)))
{
timer.Start();
extSource.GetExtSrcWfmListSize();
if (Int16.Parse(extSource.ExtSrcWfmListSize) == expectedEntries)
{
return;
}
Thread.Sleep(50); // Have to make sure this is between the start/stop commands
timer.Stop();
// Add the current interval to the total
totalTime = totalTime + timer.Duration;
}
Assert.Fail("Waveform entries were not added in the allowed " + seconds + " seconds time limit. Waveform Entries Found: " + extSource.ExtSrcWfmListSize);
}
public void SetScopeAcquisitionStateAndWaitFor(ISCOPE scope, string time)
{
UTILS.HiPerfTimer Timer1 = new UTILS.HiPerfTimer();
scope.SetScopeAcquisitonState("ON");
double maxTime = double.Parse(time);
double total_time = 0;
Thread.Sleep(3000);
while (total_time < maxTime)
{
Timer1.Start();
scope.GetScopeAcquisitionState();
scope.SetScopeAcquisitonState("ON");
Thread.Sleep(1000); // Have to make sure this is between the start/stop commands
Timer1.Stop();
// Add the current interval to the total
total_time = total_time + Timer1.Duration;
}
scope.GetScopeAcquisitionState();
if (scope.ScopeAquisitionState == "0")
{
Assert.Fail("Scope was unsuccessfully kept in RUN state");
}
}
/// <summary>
/// Gets the number of acquired waveforms from the DPO Scope
///
/// ACQuire:NUMACq?
/// </summary>
/// <param name="scope">the SCOPE object</param>
/// <param name="time">anount of time to wait in seconds, default is 10 seconds</param>
public void WaitSecondsForDPOScopeToShowAcquisitions(ISCOPE scope, string time = "10")
{
int currentAcqCount = 0;
double totalTime = 0;
UTILS.HiPerfTimer Timer1 = new UTILS.HiPerfTimer();
// Get initial acq count from scope, initialize the time accumulator
scope.GetDPOAcquisitionWfmCount();
//Error checking for a empty string otherwise, parse as normal
int initialAcqCount = string.IsNullOrWhiteSpace(scope.DPOAcquisitionWfmCount)
? 0
: int.Parse(scope.DPOAcquisitionWfmCount);
// Start the timer, and wait up to the max number of seconds specified for acqs to appear ever 500ms
while ((totalTime < double.Parse(time)) && (initialAcqCount == currentAcqCount))
{
Timer1.Start();
scope.GetDPOAcquisitionWfmCount();
//Error checking for a empty string otherwise, parse as normal
currentAcqCount = string.IsNullOrWhiteSpace(scope.DPOAcquisitionWfmCount)
? 0
: int.Parse(scope.DPOAcquisitionWfmCount);
Thread.Sleep(500); // Have to make sure this is between the start/stop commands
Timer1.Stop();
// Add the current interval to the total
totalTime = totalTime + Timer1.Duration;
}
if (initialAcqCount == currentAcqCount)
{
Assert.Fail(totalTime + " sec. passed with no acquisitions counted on DPO scope. Max time allowed was " +
time + " seconds.");
}
}
public void StarttheTimer()
{
_timer = new UTILS.HiPerfTimer();
_timer.Start();
}
public void TheScopeStaysInAcquisitionStateFor(ISCOPE scope, string givenState, string time, string units)
{
UTILS.HiPerfTimer Timer1 = new UTILS.HiPerfTimer();
long timeout = 0;
double totalTime = 0;
int value = Int16.Parse(time);
string acquireState = "";
int checkInterval = 500;
//Convert to milliseconds
switch (units)
{
case "minutes":
case "min":
timeout = value * 60; //Convert to seconds
checkInterval = 10000;
//Really no need to tie up TekVisa with calls every half second if the timeout is in minutes change to every 10 seconds
break;
case "seconds":
case "sec":
timeout = value;
break;
}
//Convert the given state to 1 or 0 to match what the Scope will return
switch (givenState)
{
case "ON":
case "RUN":
acquireState = "1";
break;
case "OFF":
case "STOP":
acquireState = "0";
break;
default:
acquireState = givenState;
break;
}
scope.GetScopeAcquisitionState();
string state = scope.ScopeAquisitionState;
if (state != acquireState)
{
if (acquireState != "") //Don't view a return of an empty string as a fail
{
Assert.Fail("Scope no longer in " + acquireState + " state");
}
}
// Start the timer, and wait up to the max amount of time
while (totalTime < timeout)
{
Timer1.Start();
scope.GetScopeAcquisitionState();
state = scope.ScopeAquisitionState;
if (state != acquireState)
{
if (acquireState != "")
{
Assert.Fail("Scope no longer in " + acquireState + " state");
}
}
Thread.Sleep(checkInterval); // Have to make sure this is between the start/stop commands
Timer1.Stop(); //CheckInterval is changed if the timeout is in minutes to reduce traffic
// Add the current interval to the total
totalTime = totalTime + Timer1.Duration;
}
}
