void ReconstructWallByCurve
(
DB.Document doc,
ref DB.Wall element,
Rhino.Geometry.Curve curve,
Optional <DB.WallType> type,
Optional <DB.Level> level,
Optional <double> height,
[Optional] DB.WallLocationLine locationLine,
[Optional] bool flipped,
[Optional, NickName("J")] bool allowJoins,
[Optional] DB.Structure.StructuralWallUsage structuralUsage
)
{
#if REVIT_2020
if
(
!(curve.IsLinear(Revit.VertexTolerance * Revit.ModelUnits) || curve.IsArc(Revit.VertexTolerance * Revit.ModelUnits) || curve.IsEllipse(Revit.VertexTolerance * Revit.ModelUnits)) ||
!curve.TryGetPlane(out var axisPlane, Revit.VertexTolerance * Revit.ModelUnits) ||
axisPlane.ZAxis.IsParallelTo(Rhino.Geometry.Vector3d.ZAxis, Revit.AngleTolerance) == 0
)
{
ThrowArgumentException(nameof(curve), "Curve must be a horizontal line, arc or ellipse curve.");
}
#else
if
(
!(curve.IsLinear(Revit.VertexTolerance * Revit.ModelUnits) || curve.IsArc(Revit.VertexTolerance * Revit.ModelUnits)) ||
!curve.TryGetPlane(out var axisPlane, Revit.VertexTolerance * Revit.ModelUnits) ||
axisPlane.ZAxis.IsParallelTo(Rhino.Geometry.Vector3d.ZAxis, Revit.AngleTolerance) == 0
)
{
ThrowArgumentException(nameof(curve), "Curve must be a horizontal line or arc curve.");
}
#endif
SolveOptionalType(ref type, doc, DB.ElementTypeGroup.WallType, nameof(type));
bool levelIsEmpty = SolveOptionalLevel(doc, curve, ref level, out var bbox);
// Curve
var levelPlane = new Rhino.Geometry.Plane(new Rhino.Geometry.Point3d(0.0, 0.0, level.Value.GetHeight() * Revit.ModelUnits), Rhino.Geometry.Vector3d.ZAxis);
if (!TryGetCurveAtPlane(curve, levelPlane, out var centerLine))
{
ThrowArgumentException(nameof(curve), "Failed to project curve in the level plane.");
}
// Height
if (!height.HasValue)
{
height = type.GetValueOrDefault()?.GetCompoundStructure()?.SampleHeight *Revit.ModelUnits ?? LiteralLengthValue(6.0);
}
if (height.Value < 0.1 * Revit.ModelUnits)
{
ThrowArgumentException(nameof(height), $"Height minimum value is {0.1 * Revit.ModelUnits} {Rhino.RhinoDoc.ActiveDoc.ModelUnitSystem}");
}
else if (height.Value > 3000 * Revit.ModelUnits)
{
ThrowArgumentException(nameof(height), $"Height maximum value is {3000 * Revit.ModelUnits} {Rhino.RhinoDoc.ActiveDoc.ModelUnitSystem}");
}
// LocationLine
if (locationLine != DB.WallLocationLine.WallCenterline)
{
double offsetDist = 0.0;
var compoundStructure = type.Value.GetCompoundStructure();
if (compoundStructure == null)
{
switch (locationLine)
{
case DB.WallLocationLine.WallCenterline:
case DB.WallLocationLine.CoreCenterline:
break;
case DB.WallLocationLine.FinishFaceExterior:
case DB.WallLocationLine.CoreExterior:
offsetDist = type.Value.Width / +2.0;
break;
case DB.WallLocationLine.FinishFaceInterior:
case DB.WallLocationLine.CoreInterior:
offsetDist = type.Value.Width / -2.0;
break;
}
}
else
{
if (!compoundStructure.IsVerticallyHomogeneous())
{
compoundStructure = DB.CompoundStructure.CreateSimpleCompoundStructure(compoundStructure.GetLayers());
}
offsetDist = compoundStructure.GetOffsetForLocationLine(locationLine);
}
if (offsetDist != 0.0)
{
centerLine = centerLine.CreateOffset(flipped ? -offsetDist : offsetDist, DB.XYZ.BasisZ);
}
}
// Type
ChangeElementTypeId(ref element, type.Value.Id);
DB.Wall newWall = null;
if (element is DB.Wall previousWall && previousWall.Location is DB.LocationCurve locationCurve && centerLine.IsSameKindAs(locationCurve.Curve))
{
newWall = previousWall;
locationCurve.Curve = centerLine;
}
public static Autodesk.Revit.DB.WallType UpdateWallType(this Document document, Autodesk.Revit.DB.Wall wall)
{
List <Autodesk.Revit.DB.WallType> wallTypes = new FilteredElementCollector(document).OfCategory(BuiltInCategory.OST_Walls).OfClass(typeof(Autodesk.Revit.DB.WallType)).Cast <Autodesk.Revit.DB.WallType>().ToList();
if (wallTypes == null || wallTypes.Count < 1)
{
return(null);
}
Autodesk.Revit.DB.WallType wallType = null;
foreach (Autodesk.Revit.DB.WallType wallType_Temp in wallTypes)
{
Parameter parameter = wallType_Temp.LookupParameter("SAM_BuildingElementDescription");
if (parameter != null)
{
string value = parameter.AsString();
if (!string.IsNullOrEmpty(value) && value == wall.Name)
{
wallType = wallType_Temp;
break;
}
}
}
if (wallType == null)
{
string name = string.Format("ARCH_Wall_{0}", wall.Name);
wallType = wallTypes.Find(x => x.Name == name);
if (wallType == null)
{
wallType = wallTypes.Find(x => x.Name == "ARCH_Wall");
if (wallType == null)
{
wallType = wallTypes.First();
wallType = wallType.Duplicate(name) as Autodesk.Revit.DB.WallType;
}
}
if (wallType == null)
{
return(null);
}
Element element = wall.Document.GetElement(wall.GetTypeId());
if (element == null)
{
return(wallType);
}
Parameter parameter_Source = null;
Parameter parameter_Destination = null;
parameter_Source = element.get_Parameter(BuiltInParameter.WALL_ATTR_WIDTH_PARAM);
if (parameter_Source != null)
{
parameter_Destination = wallType.LookupParameter("SAM_BuildingElementThickness");
if (parameter_Destination != null)
{
parameter_Destination.Set(parameter_Source.AsDouble());
}
}
parameter_Source = element.get_Parameter(BuiltInParameter.FUNCTION_PARAM);
if (parameter_Source != null)
{
parameter_Destination = wallType.LookupParameter("SAM_BuildingElementDescription");
if (parameter_Destination != null)
{
parameter_Destination.Set(name);
}
parameter_Destination = wallType.get_Parameter(BuiltInParameter.FUNCTION_PARAM);
if (parameter_Destination != null)
{
parameter_Destination.Set(parameter_Destination.AsInteger());
}
}
}
return(wallType);
}
/// <summary>
/// Frame a Wall
/// </summary>
/// <param name="rvtApp">Revit application></param>
/// <param name="wall">Wall as host to place column objects</param>
/// <param name="spacing">spacing between two columns</param>
/// <param name="columnType">column type</param>
private void FrameWall(Autodesk.Revit.ApplicationServices.Application rvtApp, Autodesk.Revit.DB.Wall wall,
double spacing, Autodesk.Revit.DB.FamilySymbol columnType)
{
Autodesk.Revit.DB.Document rvtDoc = wall.Document;
// get wall location
Autodesk.Revit.DB.LocationCurve loc = (Autodesk.Revit.DB.LocationCurve)wall.Location;
Autodesk.Revit.DB.XYZ startPt = loc.Curve.GetEndPoint(0);
Autodesk.Revit.DB.XYZ endPt = loc.Curve.GetEndPoint(1);
// get wall's vector
Autodesk.Revit.DB.UV wallVec = new Autodesk.Revit.DB.UV(
endPt.X - startPt.X,
endPt.Y - startPt.Y);
// get the axis vector
Autodesk.Revit.DB.UV axis = new Autodesk.Revit.DB.UV(1.0, 0.0);
Autodesk.Revit.DB.ElementId baseLevelId = wall.get_Parameter(BuiltInParameter.WALL_BASE_CONSTRAINT).AsElementId();
Autodesk.Revit.DB.ElementId topLevelId = wall.get_Parameter(BuiltInParameter.WALL_HEIGHT_TYPE).AsElementId();
// get wall length and vector
double wallLength = wallVec.GetLength();
wallVec = wallVec.Normalize();
// get # of column
int nmax = (int)(wallLength / spacing);
TaskDialog.Show("Revit", "wallLength = " + wallLength + "\r\nspacing = " + spacing.ToString() + "\r\nnmax = " + nmax.ToString());
// get angle of wall and axis
double angle = wallVec.AngleTo(axis);
// place all column
Autodesk.Revit.DB.XYZ loc2 = startPt;
double dx = wallVec.U * spacing;
double dy = wallVec.V * spacing;
for (int i = 0; i < nmax; i++)
{
PlaceColumn(rvtApp, rvtDoc, loc2, angle, columnType, baseLevelId, topLevelId);
loc2 = new XYZ(loc2.X + dx,
loc2.Y + dy,
loc2.Z);
}
// place column at end point of wall
PlaceColumn(rvtApp, rvtDoc, endPt, angle, columnType, baseLevelId, topLevelId);
}
protected override void TrySolveInstance(IGH_DataAccess dataAccess)
{
int index = -1;
bool run = false;
index = Params.IndexOfInputParam("_run");
if (index == -1 || !dataAccess.GetData(index, ref run) || !run)
{
return;
}
Element element = null;
index = Params.IndexOfInputParam("_element");
if (index == -1 || !dataAccess.GetData(index, ref element))
{
return;
}
Transform transform;
if (element == null)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Invalid data");
return;
}
StartTransaction(element.Document);
bool successful = false;
if (element is Autodesk.Revit.DB.Wall)
{
List <Level> levels = new FilteredElementCollector(element.Document).OfClass(typeof(Level)).Cast <Level>().ToList();
if (levels != null && levels.Count != 0)
{
BoundingBoxXYZ boundingBoxXYZ = element.get_BoundingBox(null);
if (boundingBoxXYZ != null)
{
Level level = levels.Find(x => x.Elevation.AlmostEqual(boundingBoxXYZ.Max.Z, Tolerance.MacroDistance));
if (level != null)
{
Autodesk.Revit.DB.Wall wall = (Autodesk.Revit.DB.Wall)element;
Parameter parameter = wall.get_Parameter(BuiltInParameter.WALL_HEIGHT_TYPE);
if (parameter != null)
{
successful = parameter.Set(level.Id);
}
}
}
}
}
else if (element is Autodesk.Revit.DB.Mechanical.Space)
{
List <Level> levels = new FilteredElementCollector(element.Document).OfClass(typeof(Level)).Cast <Level>().ToList();
if (levels != null && levels.Count != 0)
{
Autodesk.Revit.DB.Mechanical.Space space = (Autodesk.Revit.DB.Mechanical.Space)element;
double elevation = space.UnboundedHeight + levels.Find(x => x.Id == space.LevelId).Elevation;
Level level = levels.Find(x => x.Elevation.AlmostEqual(elevation, Tolerance.MacroDistance));
if (level != null)
{
Parameter parameter = space.get_Parameter(BuiltInParameter.ROOM_UPPER_LEVEL);
if (parameter != null)
{
if (parameter.AsElementId() != level.Id)
{
successful = parameter.Set(level.Id);
parameter = space.get_Parameter(BuiltInParameter.ROOM_UPPER_OFFSET);
if (parameter != null)
{
parameter.Set(0.0);
}
}
}
}
}
}
index = Params.IndexOfOutputParam("element");
if (index != -1)
{
dataAccess.SetData(index, element);
}
index = Params.IndexOfOutputParam("successful");
if (index != -1)
{
dataAccess.SetData(index, successful);
}
}
private static Autodesk.Revit.DB.Wall CopyWall(Autodesk.Revit.DB.WallType wallType, Autodesk.Revit.DB.Wall Wall, Level level_Bottom, Level level_Top, Dictionary <ElementId, List <FamilyInstance> > dictionary_Hosts, Dictionary <BuiltInCategory, FamilySymbol> dictionary_Symbols)
{
if (wallType == null || Wall == null)
{
return(null);
}
if (!(Wall.Location is LocationCurve))
{
return(null);
}
LocationCurve locationCurve = Wall.Location as LocationCurve;
Document document = wallType.Document;
Autodesk.Revit.DB.Wall result = Autodesk.Revit.DB.Wall.Create(wallType.Document, locationCurve.Curve, level_Bottom.Id, false);
result.WallType = wallType;
//FamilyInstance aFamilyInstance = aDocument.Create.NewFamilyInstance(aLocationCurve.Curve, ElementType, Level_Bottom, Autodesk.Revit.DB.Structure.StructuralType.NonStructural);
if (result == null)
{
return(null);
}
if (Wall.Flipped != result.Flipped)
{
result.Flip();
}
Parameter parameter = null;
if (level_Top.Elevation > level_Bottom.Elevation)
{
parameter = result.get_Parameter(BuiltInParameter.WALL_HEIGHT_TYPE);
if (parameter != null)
{
parameter.Set(level_Top.Id);
}
}
else
{
parameter = result.get_Parameter(BuiltInParameter.WALL_USER_HEIGHT_PARAM);
if (parameter != null && !parameter.IsReadOnly)
{
#if Revit2017 || Revit2018 || Revit2019 || Revit2020
parameter.Set(UnitUtils.ConvertToInternalUnits(2000, DisplayUnitType.DUT_MILLIMETERS));
#else
parameter.Set(UnitUtils.ConvertToInternalUnits(2000, UnitTypeId.Millimeters));
#endif
}
}
parameter = result.get_Parameter(BuiltInParameter.ALL_MODEL_INSTANCE_COMMENTS);
if (parameter != null)
{
parameter.Set(Wall.Id.IntegerValue.ToString());
}
document.Regenerate();
AddHosts(result, Wall.Id, dictionary_Hosts, dictionary_Symbols);
return(result);
}
public static HostObject HostObject(this Aperture aperture, Document document)
{
HostObject result = null;
PanelGroup panelGroup = Analytical.Query.PanelGroup(Analytical.Query.PanelType(aperture.Plane.Normal));
switch (panelGroup)
{
case PanelGroup.Wall:
IEnumerable <Autodesk.Revit.DB.Wall> walls = Geometry.Revit.Query.Elements <Autodesk.Revit.DB.Wall>(document, aperture.GetBoundingBox());
if (walls != null && walls.Count() != 0)
{
Geometry.Spatial.Point3D point3D = Geometry.Spatial.Query.InternalPoint3D(aperture.GetFace3D());
double distance = double.MaxValue;
Autodesk.Revit.DB.Wall wall = null;
foreach (Autodesk.Revit.DB.Wall wall_Temp in walls)
{
List <Panel> panels = Convert.ToSAM(wall_Temp, new Core.Revit.ConvertSettings(true, false, false));
if (panels != null)
{
foreach (Panel panel in panels)
{
double distance_Temp = panel.GetFace3D().Distance(point3D);
if (distance_Temp < distance)
{
distance = distance_Temp;
wall = wall_Temp;
}
}
}
}
result = wall;
}
break;
case PanelGroup.Floor:
IEnumerable <Element> elements_Floor = Geometry.Revit.Query.Elements(document, aperture.GetBoundingBox(), Autodesk.Revit.DB.BuiltInCategory.OST_Floors);
if (elements_Floor != null && elements_Floor.Count() != 0)
{
result = elements_Floor.First() as HostObject;
}
break;
case PanelGroup.Roof:
IEnumerable <Element> elements_Roof = Geometry.Revit.Query.Elements(document, aperture.GetBoundingBox(), Autodesk.Revit.DB.BuiltInCategory.OST_Roofs);
if (elements_Roof != null && elements_Roof.Count() != 0)
{
result = elements_Roof.First() as HostObject;
}
break;
}
if (result == null)
{
switch (panelGroup)
{
case PanelGroup.Roof:
IEnumerable <Element> elements_Floor = Geometry.Revit.Query.Elements(document, aperture.GetBoundingBox(), Autodesk.Revit.DB.BuiltInCategory.OST_Floors);
if (elements_Floor != null && elements_Floor.Count() != 0)
{
result = elements_Floor.First() as HostObject;
}
break;
case PanelGroup.Floor:
IEnumerable <Element> elements_Roof = Geometry.Revit.Query.Elements(document, aperture.GetBoundingBox(), Autodesk.Revit.DB.BuiltInCategory.OST_Roofs);
if (elements_Roof != null && elements_Roof.Count() != 0)
{
result = elements_Roof.First() as HostObject;
}
break;
}
}
return(result);
}
protected override void SolveInstance(IGH_DataAccess DA)
{
// 0.import data
Autodesk.Revit.DB.Wall wall = null;
Autodesk.Revit.DB.PointCloudInstance element = null;
double bufferDistance = 0.30; int numPoints = 50000;
if (!DA.GetData("Revit Wall", ref wall))
{
return;
}
if (!DA.GetData("Revit Point Cloud Instance", ref element))
{
return;
}
if (!DA.GetData("bufferDistance", ref bufferDistance))
{
return;
}
if (!DA.GetData("numPoints", ref numPoints))
{
return;
}
// 1.Create selection filter
var width = wall.Width + bufferDistance * 2;
//var width = wall.get_Parameter(BuiltInParameter.WALL_ATTR_WIDTH_PARAM).AsDouble();
//double width = UnitUtils.ConvertFromInternalUnits(wall.WallType.Width, DisplayUnitType);
BoundingBoxXYZ boundingBox = wall.get_BoundingBox(null);
// 2. Compute boundary U
LocationCurve locationCurve_u = wall.Location as LocationCurve;
XYZ endPoint0_u = locationCurve_u.Curve.GetEndPoint(0);
XYZ endPoint1_u = locationCurve_u.Curve.GetEndPoint(1);
var ux = endPoint1_u.X - endPoint0_u.X;
var uy = endPoint1_u.Y - endPoint0_u.Y;
XYZ uxy = new XYZ(ux, uy, 0);
// 3. Compute boudary V
XYZ midpoint = endPoint0_u + ((endPoint1_u - endPoint0_u) / 2);
//var axis = Autodesk.Revit.DB.Line.CreateUnbound(midpoint, XYZ.BasisZ);
//var locationCurve_v=locationCurve_u.Rotate(axis, Math.PI * 0.5);
var endPoint0_v = locationCurve_u.Curve.Evaluate(locationCurve_u.Curve.Length * 0.5 - width * 0.5 * 10 - bufferDistance * 10, false);
var endPoint1_v = locationCurve_u.Curve.Evaluate(locationCurve_u.Curve.Length * 0.5 + width * 0.5 * 10 + bufferDistance * 10, false);
// rotate points 90°
var endPoint0_v_X = (endPoint0_v.X - midpoint.X) * Math.Cos(Math.PI * 0.5) + (endPoint0_v.Y - midpoint.Y) * Math.Sin(Math.PI * 0.5) + midpoint.X;
var endPoint0_v_Y = (endPoint0_v.X - midpoint.X) * -Math.Sin(Math.PI * 0.5) + (endPoint0_v.Y - midpoint.Y) * Math.Cos(Math.PI * 0.5) + midpoint.Y;
var endPoint1_v_X = (endPoint1_v.X - midpoint.X) * Math.Cos(Math.PI * 0.5) + (endPoint1_v.Y - midpoint.Y) * Math.Sin(Math.PI * 0.5) + midpoint.X;
var endPoint1_v_Y = (endPoint1_v.X - midpoint.X) * -Math.Sin(Math.PI * 0.5) + (endPoint1_v.Y - midpoint.Y) * Math.Cos(Math.PI * 0.5) + midpoint.Y;
XYZ boundary0_v = new XYZ(endPoint0_v_X, endPoint0_v_Y, 0);
XYZ boundary1_v = new XYZ(endPoint1_v_X, endPoint1_v_Y, 0);
//XYZ endPoint0_v = locationCurve_u.Curve.GetEndPoint(0);
//XYZ endPoint1_v = locationCurve_u.Curve.GetEndPoint(1);
var vx = boundary1_v.X - boundary0_v.X;
var vy = boundary1_v.Y - boundary0_v.Y;
XYZ vxy = new XYZ(vx, vy, 0);
// 4. Create boundary planes
List <Autodesk.Revit.DB.Plane> planes = new List <Autodesk.Revit.DB.Plane>();
// U boundaries
planes.Add(Autodesk.Revit.DB.Plane.CreateByNormalAndOrigin(uxy, endPoint0_u));
planes.Add(Autodesk.Revit.DB.Plane.CreateByNormalAndOrigin(-uxy, endPoint1_u));
// V boundaries
planes.Add(Autodesk.Revit.DB.Plane.CreateByNormalAndOrigin(vxy, boundary0_v));
planes.Add(Autodesk.Revit.DB.Plane.CreateByNormalAndOrigin(-vxy, boundary1_v));
// Z boundaries
planes.Add(Autodesk.Revit.DB.Plane.CreateByNormalAndOrigin(XYZ.BasisZ, boundingBox.Min));
planes.Add(Autodesk.Revit.DB.Plane.CreateByNormalAndOrigin(-XYZ.BasisZ, boundingBox.Max));
// Create filter
PointCloudFilter filter = PointCloudFilterFactory.CreateMultiPlaneFilter(planes);
// 5.Fetch point cloud
PointCollection cloudPoints = element.GetPoints(filter, bufferDistance, numPoints);
PointCloud Rh_pointCloud = new PointCloud();
// 6.Convert CloudPoints to rhino point cloud
if (element.HasColor())
{
foreach (CloudPoint point in cloudPoints)
{
// Process each point
Point3d point3d = new Point3d(point.X * 1000, point.Y * 1000, point.Z * 1000);
byte[] bArray = BitConverter.GetBytes(point.Color);
var color = System.Drawing.Color.FromArgb(bArray[0], bArray[1], bArray[2]);
Rh_pointCloud.Add(point3d, color);
}
}
else
{
foreach (CloudPoint point in cloudPoints)
{
// Process each point
Point3d point3d = new Point3d(point.X * 1000, point.Y * 1000, point.Z * 1000);
Rh_pointCloud.Add(point3d);
}
}
// 7.Return Grasshopper Cloud
GH_Cloud GH_pointCloud = new GH_Cloud(Rh_pointCloud);
DA.SetData(0, GH_pointCloud);
}
/// <summary>
/// Initialize a Wall element
/// </summary>
/// <param name="wall"></param>
private void InitWall(Autodesk.Revit.DB.Wall wall)
{
InternalSetWall(wall);
}
void ReconstructWallByProfile
(
DB.Document doc,
ref DB.Wall element,
IList <Rhino.Geometry.Curve> profile,
Optional <DB.WallType> type,
Optional <DB.Level> level,
[Optional] DB.WallLocationLine locationLine,
[Optional] bool flipped,
[Optional, NickName("J")] bool allowJoins,
[Optional] DB.Structure.StructuralWallUsage structuralUsage
)
{
foreach (var boundary in profile)
{
if
(
!boundary.IsClosed ||
!boundary.TryGetPlane(out var boundaryPlane, Revit.VertexTolerance) ||
!boundaryPlane.ZAxis.IsPerpendicularTo(Rhino.Geometry.Vector3d.ZAxis)
)
{
ThrowArgumentException(nameof(boundary), "Boundary must be a vertical planar closed curve.");
}
}
SolveOptionalType(ref type, doc, DB.ElementTypeGroup.WallType, nameof(type));
SolveOptionalLevel(doc, profile, ref level, out var bbox);
foreach (var curve in profile)
{
curve.RemoveShortSegments(Revit.ShortCurveTolerance * Revit.ModelUnits);
}
var boundaries = profile.SelectMany(x => GeometryEncoder.ToCurveMany(x)).SelectMany(CurveExtension.ToBoundedCurves).ToList();
// LocationLine
if (locationLine != DB.WallLocationLine.WallCenterline)
{
double offsetDist = 0.0;
var compoundStructure = type.Value.GetCompoundStructure();
if (compoundStructure == null)
{
switch (locationLine)
{
case DB.WallLocationLine.WallCenterline:
case DB.WallLocationLine.CoreCenterline:
break;
case DB.WallLocationLine.FinishFaceExterior:
case DB.WallLocationLine.CoreExterior:
offsetDist = type.Value.Width / +2.0;
break;
case DB.WallLocationLine.FinishFaceInterior:
case DB.WallLocationLine.CoreInterior:
offsetDist = type.Value.Width / -2.0;
break;
}
}
else
{
if (!compoundStructure.IsVerticallyHomogeneous())
{
compoundStructure = DB.CompoundStructure.CreateSimpleCompoundStructure(compoundStructure.GetLayers());
}
offsetDist = compoundStructure.GetOffsetForLocationLine(locationLine);
}
if (offsetDist != 0.0)
{
profile[0].TryGetPlane(out var plane);
var translation = DB.Transform.CreateTranslation((plane.Normal * (flipped ? -offsetDist : offsetDist)).ToXYZ());
for (int b = 0; b < boundaries.Count; ++b)
{
boundaries[b] = boundaries[b].CreateTransformed(translation);
}
}
}
var newWall = DB.Wall.Create
(
doc,
boundaries,
type.Value.Id,
level.Value.Id,
structuralUsage != DB.Structure.StructuralWallUsage.NonBearing
);
// Walls are created with the last LocationLine used in the Revit editor!!
//newWall.get_Parameter(BuiltInParameter.WALL_KEY_REF_PARAM).Set((int) WallLocationLine.WallCenterline);
var parametersMask = new DB.BuiltInParameter[]
{
DB.BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM,
DB.BuiltInParameter.ELEM_FAMILY_PARAM,
DB.BuiltInParameter.ELEM_TYPE_PARAM,
DB.BuiltInParameter.WALL_KEY_REF_PARAM,
DB.BuiltInParameter.WALL_USER_HEIGHT_PARAM,
DB.BuiltInParameter.WALL_BASE_CONSTRAINT,
DB.BuiltInParameter.WALL_BASE_OFFSET,
DB.BuiltInParameter.WALL_STRUCTURAL_SIGNIFICANT,
DB.BuiltInParameter.WALL_STRUCTURAL_USAGE_PARAM
};
ReplaceElement(ref element, newWall, parametersMask);
if (newWall != null)
{
newWall.get_Parameter(DB.BuiltInParameter.WALL_BASE_CONSTRAINT).Set(level.Value.Id);
newWall.get_Parameter(DB.BuiltInParameter.WALL_BASE_OFFSET).Set(bbox.Min.Z / Revit.ModelUnits - level.Value.Elevation);
newWall.get_Parameter(DB.BuiltInParameter.WALL_KEY_REF_PARAM).Set((int)locationLine);
if (structuralUsage == DB.Structure.StructuralWallUsage.NonBearing)
{
newWall.get_Parameter(DB.BuiltInParameter.WALL_STRUCTURAL_SIGNIFICANT).Set(0);
}
else
{
newWall.get_Parameter(DB.BuiltInParameter.WALL_STRUCTURAL_SIGNIFICANT).Set(1);
newWall.get_Parameter(DB.BuiltInParameter.WALL_STRUCTURAL_USAGE_PARAM).Set((int)structuralUsage);
}
if (newWall.Flipped != flipped)
{
newWall.Flip();
}
// Setup joins in a last step
if (allowJoins)
{
joinedWalls.Add(newWall);
}
else
{
DB.WallUtils.DisallowWallJoinAtEnd(newWall, 0);
DB.WallUtils.DisallowWallJoinAtEnd(newWall, 1);
}
}
}
public Wall(DB.Wall host) : base(host)
{
}
// TODO: Wall to Speckle
// TODO: Set levels, heights, etc.
// Does not go through nicely from revit to revit
public static SpeckleElementsClasses.Wall ToSpeckle(this Autodesk.Revit.DB.Wall myWall)
{
var speckleWall = new SpeckleElementsClasses.Wall();
speckleWall.baseCurve = SpeckleCore.Converter.Serialise(((LocationCurve)myWall.Location).Curve) as SpeckleObject;
var heightParam = myWall.get_Parameter(BuiltInParameter.WALL_USER_HEIGHT_PARAM);
var heightValue = heightParam.AsDouble();
var height = UnitUtils.ConvertFromInternalUnits(heightValue, heightParam.DisplayUnitType);
speckleWall.height = heightValue / Scale;
var offsetParam = myWall.get_Parameter(BuiltInParameter.WALL_BASE_OFFSET);
var offsetValue = offsetParam.AsDouble();
var offset = UnitUtils.ConvertFromInternalUnits(offsetValue, offsetParam.DisplayUnitType);
speckleWall.offset = offsetValue / Scale;
speckleWall.wallType = myWall.WallType.Name;
var level = (Level)Doc.GetElement(myWall.get_Parameter(BuiltInParameter.WALL_BASE_CONSTRAINT).AsElementId());
speckleWall.baseLevel = level.ToSpeckle();
try
{
var topLevel = (Level)Doc.GetElement(myWall.get_Parameter(BuiltInParameter.WALL_HEIGHT_TYPE).AsElementId());
speckleWall.topLevel = topLevel.ToSpeckle();
}
catch (Exception e) { }
speckleWall.parameters = GetElementParams(myWall);
var grid = myWall.CurtainGrid;
// TODO: Should move maybe in base class defintion
speckleWall.Properties["__flipped"] = myWall.Flipped;
speckleWall.ApplicationId = myWall.UniqueId;
speckleWall.elementId = myWall.Id.ToString();
speckleWall.GenerateHash();
// meshing for walls in case they are curtain grids
if (grid != null)
{
var mySolids = new List <Solid>();
foreach (ElementId panelId in grid.GetPanelIds())
{
mySolids.AddRange(GetElementSolids(Doc.GetElement(panelId)));
}
foreach (ElementId mullionId in grid.GetMullionIds())
{
mySolids.AddRange(GetElementSolids(Doc.GetElement(mullionId)));
}
(speckleWall.Faces, speckleWall.Vertices) = GetFaceVertexArrFromSolids(mySolids);
}
else
{
(speckleWall.Faces, speckleWall.Vertices) = GetFaceVertexArrayFromElement(myWall, new Options()
{
DetailLevel = ViewDetailLevel.Fine, ComputeReferences = false
});
}
return(speckleWall);
}
void ReconstructWallByCurve
(
DB.Document doc,
ref DB.Element element,
Rhino.Geometry.Curve curve,
Optional <DB.WallType> type,
Optional <DB.Level> level,
[Optional] bool structural,
[Optional] double height,
[Optional] DB.WallLocationLine locationLine,
[Optional] bool flipped,
[Optional, NickName("J")] bool allowJoins
)
{
var scaleFactor = 1.0 / Revit.ModelUnits;
#if REVIT_2020
if
(
((curve = curve.ChangeUnits(scaleFactor)) is null) ||
!(curve.IsLinear(Revit.VertexTolerance) || curve.IsArc(Revit.VertexTolerance) || curve.IsEllipse(Revit.VertexTolerance)) ||
!curve.TryGetPlane(out var axisPlane, Revit.VertexTolerance) ||
axisPlane.ZAxis.IsParallelTo(Rhino.Geometry.Vector3d.ZAxis) == 0
)
{
ThrowArgumentException(nameof(curve), "Curve must be a horizontal line, arc or ellipse curve.");
}
#else
if
(
((curve = curve.ChangeUnits(scaleFactor)) is null) ||
!(curve.IsLinear(Revit.VertexTolerance) || curve.IsArc(Revit.VertexTolerance)) ||
!curve.TryGetPlane(out var axisPlane, Revit.VertexTolerance) ||
axisPlane.ZAxis.IsParallelTo(Rhino.Geometry.Vector3d.ZAxis) == 0
)
{
ThrowArgumentException(nameof(curve), "Curve must be a horizontal line or arc curve.");
}
#endif
SolveOptionalType(ref type, doc, DB.ElementTypeGroup.WallType, nameof(type));
double axisMinZ = Math.Min(curve.PointAtStart.Z, curve.PointAtEnd.Z);
bool levelIsEmpty = SolveOptionalLevel(ref level, doc, curve, nameof(level));
height *= scaleFactor;
if (height < Revit.VertexTolerance)
{
height = (type.HasValue ? type.Value : null)?.GetCompoundStructure()?.SampleHeight ?? LiteralLengthValue(6.0) / Revit.ModelUnits;
}
// Axis
var levelPlane = new Rhino.Geometry.Plane(new Rhino.Geometry.Point3d(0.0, 0.0, level.Value.Elevation), Rhino.Geometry.Vector3d.ZAxis);
curve = Rhino.Geometry.Curve.ProjectToPlane(curve, levelPlane);
var centerLine = curve.ToHost();
// LocationLine
if (locationLine != DB.WallLocationLine.WallCenterline)
{
double offsetDist = 0.0;
var compoundStructure = type.Value.GetCompoundStructure();
if (compoundStructure == null)
{
switch (locationLine)
{
case DB.WallLocationLine.WallCenterline:
case DB.WallLocationLine.CoreCenterline:
break;
case DB.WallLocationLine.FinishFaceExterior:
case DB.WallLocationLine.CoreExterior:
offsetDist = type.Value.Width / +2.0;
break;
case DB.WallLocationLine.FinishFaceInterior:
case DB.WallLocationLine.CoreInterior:
offsetDist = type.Value.Width / -2.0;
break;
}
}
else
{
if (!compoundStructure.IsVerticallyHomogeneous())
{
compoundStructure = DB.CompoundStructure.CreateSimpleCompoundStructure(compoundStructure.GetLayers());
}
offsetDist = compoundStructure.GetOffsetForLocationLine(locationLine);
}
if (offsetDist != 0.0)
{
centerLine = centerLine.CreateOffset(flipped ? -offsetDist : offsetDist, DB.XYZ.BasisZ);
}
}
// Type
ChangeElementTypeId(ref element, type.Value.Id);
DB.Wall newWall = null;
if (element is DB.Wall previousWall && previousWall.Location is DB.LocationCurve locationCurve && centerLine.IsSameKindAs(locationCurve.Curve))
{
newWall = previousWall;
locationCurve.Curve = centerLine;
}
protected override void TrySolveInstance(IGH_DataAccess dataAccess)
{
int index = -1;
bool run = false;
index = Params.IndexOfInputParam("_run");
if (index == -1 || !dataAccess.GetData(index, ref run) || !run)
{
return;
}
double maxDistance = 0.2;
index = Params.IndexOfInputParam("_maxDistance");
if (index == -1 || !dataAccess.GetData(index, ref maxDistance))
{
return;
}
RhinoInside.Revit.GH.Types.Level level_GH = null;
index = Params.IndexOfInputParam("_level");
if (index == -1 || !dataAccess.GetData(index, ref level_GH))
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Invalid data");
return;
}
RhinoInside.Revit.GH.Types.Level referenceLevel_GH = null;
index = Params.IndexOfInputParam("_referenceLevel");
if (index == -1 || !dataAccess.GetData(index, ref referenceLevel_GH))
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Invalid data");
return;
}
Level level = level_GH.Value;
if (level == null)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Invalid data");
return;
}
Level referenceLevel = referenceLevel_GH.Value;
if (level == null)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Invalid data");
return;
}
#if Revit2017 || Revit2018 || Revit2019 || Revit2020
double elevation = UnitUtils.ConvertFromInternalUnits(level.Elevation, DisplayUnitType.DUT_METERS);
double referenceElevation = UnitUtils.ConvertFromInternalUnits(referenceLevel.Elevation, DisplayUnitType.DUT_METERS);
#else
double elevation = UnitUtils.ConvertFromInternalUnits(level.Elevation, UnitTypeId.Meters);
double referenceElevation = UnitUtils.ConvertFromInternalUnits(referenceLevel.Elevation, UnitTypeId.Meters);
#endif
Document document = level.Document;
IEnumerable <Autodesk.Revit.DB.Wall> walls_All = new FilteredElementCollector(document).OfClass(typeof(Autodesk.Revit.DB.Wall)).Cast <Autodesk.Revit.DB.Wall>();
if (walls_All == null || walls_All.Count() == 0)
{
return;
}
StartTransaction(document);
ConvertSettings convertSettings = new ConvertSettings(true, true, true);
List <Panel> panels = new List <Panel>();
List <Panel> panels_Reference = new List <Panel>();
foreach (Autodesk.Revit.DB.Wall wall in walls_All)
{
List <Panel> panels_Temp = Analytical.Revit.Convert.ToSAM(wall, convertSettings);
foreach (Panel panel in panels_Temp)
{
double max = panel.MaxElevation();
double min = panel.MinElevation();
if (Math.Abs(min - elevation) < Core.Tolerance.Distance || (min - Core.Tolerance.Distance < elevation && max - Core.Tolerance.Distance > elevation))
{
panels.Add(panel);
}
if (Math.Abs(min - referenceElevation) < Core.Tolerance.Distance || (min - Core.Tolerance.Distance < referenceElevation && max - Core.Tolerance.Distance > referenceElevation))
{
panels_Reference.Add(panel);
}
}
}
IEnumerable <ElementId> elementIds = panels.ConvertAll(x => x.ElementId()).Distinct();
IEnumerable <ElementId> elementIds_Reference = panels_Reference.ConvertAll(x => x.ElementId()).Distinct();
Geometry.Spatial.Plane plane = new Geometry.Spatial.Plane(new Point3D(0, 0, elevation), Vector3D.WorldZ);
Dictionary <Segment2D, HostObjAttributes> dictionary_Reference = new Dictionary <Segment2D, HostObjAttributes>();
foreach (ElementId elementId in elementIds_Reference)
{
Element element = document.GetElement(elementId);
if (element == null)
{
continue;
}
HostObjAttributes hostObjAttributes = document.GetElement(element.GetTypeId()) as HostObjAttributes;
if (hostObjAttributes == null)
{
continue;
}
LocationCurve locationCurve = element.Location as LocationCurve;
ISegmentable3D segmentable3D = locationCurve.ToSAM() as ISegmentable3D;
if (segmentable3D == null)
{
continue;
}
List <Segment3D> segment3Ds = segmentable3D.GetSegments();
if (segment3Ds == null || segment3Ds.Count == 0)
{
continue;
}
segment3Ds.ForEach(x => dictionary_Reference[plane.Convert(x)] = hostObjAttributes);
}
Dictionary <Segment2D, ElementId> dictionary = new Dictionary <Segment2D, ElementId>();
foreach (ElementId elementId in elementIds)
{
LocationCurve locationCurve = document.GetElement(elementId).Location as LocationCurve;
Segment3D segment3D = locationCurve.ToSAM() as Segment3D;
if (segment3D == null)
{
continue;
}
dictionary[plane.Convert(plane.Project(segment3D))] = elementId;
}
Dictionary <Segment2D, ElementId> dictionary_Result = new Dictionary <Segment2D, ElementId>();
foreach (KeyValuePair <Segment2D, ElementId> keyValuePair in dictionary)
{
Segment2D segment2D = keyValuePair.Key;
List <Segment2D> segment2Ds_Temp = dictionary_Reference.Keys.ToList().FindAll(x => x.Collinear(segment2D) && x.Distance(segment2D) <= maxDistance + Core.Tolerance.MacroDistance && x.Distance(segment2D) > Core.Tolerance.MacroDistance);
if (segment2Ds_Temp == null || segment2Ds_Temp.Count == 0)
{
continue;
}
Element element = document.GetElement(keyValuePair.Value);
if (element == null)
{
continue;
}
HostObjAttributes hostObjAttributes = document.GetElement(element.GetTypeId()) as HostObjAttributes;
if (hostObjAttributes == null)
{
continue;
}
segment2Ds_Temp.Sort((x, y) => segment2D.Distance(x).CompareTo(segment2D.Distance(y)));
Segment2D segment2D_Reference = null;
foreach (Segment2D segment2D_Temp in segment2Ds_Temp)
{
HostObjAttributes hostObjAttributes_Temp = dictionary_Reference[segment2D_Temp];
if (hostObjAttributes.Name.Equals(hostObjAttributes_Temp.Name))
{
segment2D_Reference = segment2D_Temp;
break;
}
}
if (segment2D_Reference == null)
{
HashSet <PanelType> panelTypes = new HashSet <PanelType>();
panelTypes.Add(Analytical.Revit.Query.PanelType(hostObjAttributes));
switch (panelTypes.First())
{
case PanelType.CurtainWall:
panelTypes.Add(PanelType.WallExternal);
break;
case PanelType.UndergroundWall:
panelTypes.Add(PanelType.WallExternal);
break;
case PanelType.Undefined:
panelTypes.Add(PanelType.WallInternal);
break;
}
foreach (Segment2D segment2D_Temp in segment2Ds_Temp)
{
HostObjAttributes hostObjAttributes_Temp = dictionary_Reference[segment2D_Temp];
PanelType panelType_Temp = Analytical.Revit.Query.PanelType(hostObjAttributes_Temp);
if (panelTypes.Contains(panelType_Temp))
{
segment2D_Reference = segment2D_Temp;
break;
}
}
}
if (segment2D_Reference == null)
{
segment2D_Reference = segment2Ds_Temp.First();
}
Segment2D segment2D_Project = segment2D_Reference.Project(segment2D);
if (segment2D_Project == null)
{
continue;
}
dictionary_Result[segment2D_Project] = dictionary[segment2D];
}
List <HostObject> result = new List <HostObject>();
foreach (KeyValuePair <Segment2D, ElementId> keyValuePair in dictionary_Result)
{
Autodesk.Revit.DB.Wall wall = document.GetElement(keyValuePair.Value) as Autodesk.Revit.DB.Wall;
if (wall == null || !wall.IsValidObject)
{
continue;
}
Segment2D segment2D = keyValuePair.Key;
bool pinned = wall.Pinned;
if (wall.Pinned)
{
using (SubTransaction subTransaction = new SubTransaction(document))
{
subTransaction.Start();
wall.Pinned = false;
subTransaction.Commit();
}
}
Segment3D segment3D = plane.Convert(segment2D);
LocationCurve locationCurve = wall.Location as LocationCurve;
using (SubTransaction subTransaction = new SubTransaction(document))
{
subTransaction.Start();
document.Regenerate();
locationCurve.Curve = Geometry.Revit.Convert.ToRevit(segment3D);
subTransaction.Commit();
}
if (wall.Pinned != pinned)
{
using (SubTransaction subTransaction = new SubTransaction(document))
{
subTransaction.Start();
wall.Pinned = pinned;
subTransaction.Commit();
}
}
result.Add(wall);
}
index = Params.IndexOfOutputParam("walls");
if (index != -1)
{
dataAccess.SetDataList(index, result);
}
}
/// <summary>
/// Set the internal Element, ElementId, and UniqueId
/// </summary>
/// <param name="wall"></param>
private void InternalSetWall(Autodesk.Revit.DB.Wall wall)
{
InternalWall = wall;
InternalElementId = wall.Id;
InternalUniqueId = wall.UniqueId;
}
public Base WallToSpeckle(DB.Wall revitWall)
{
var baseGeometry = LocationToSpeckle(revitWall);
if (baseGeometry is Geometry.Point)
{
return(RevitElementToSpeckle(revitWall));
}
RevitWall speckleWall = new RevitWall();
speckleWall.family = revitWall.WallType.FamilyName.ToString();
speckleWall.type = revitWall.WallType.Name;
speckleWall.baseLine = (ICurve)baseGeometry;
speckleWall.level = ConvertAndCacheLevel(revitWall, BuiltInParameter.WALL_BASE_CONSTRAINT);
speckleWall.topLevel = ConvertAndCacheLevel(revitWall, BuiltInParameter.WALL_HEIGHT_TYPE);
speckleWall.height = GetParamValue <double>(revitWall, BuiltInParameter.WALL_USER_HEIGHT_PARAM);
speckleWall.baseOffset = GetParamValue <double>(revitWall, BuiltInParameter.WALL_BASE_OFFSET);
speckleWall.topOffset = GetParamValue <double>(revitWall, BuiltInParameter.WALL_TOP_OFFSET);
speckleWall.structural = GetParamValue <bool>(revitWall, BuiltInParameter.WALL_STRUCTURAL_SIGNIFICANT);
speckleWall.flipped = revitWall.Flipped;
if (revitWall.CurtainGrid == null)
{
if (revitWall.IsStackedWall)
{
var wallMembers = revitWall.GetStackedWallMemberIds().Select(id => (Wall)Doc.GetElement(id));
speckleWall.elements = new List <Base>();
foreach (var wall in wallMembers)
{
speckleWall.elements.Add(WallToSpeckle(wall));
}
}
speckleWall.displayMesh = GetElementDisplayMesh(revitWall,
new Options()
{
DetailLevel = ViewDetailLevel.Fine, ComputeReferences = false
});
}
else
{
// curtain walls have two meshes, one for panels and one for mullions
// adding mullions as sub-elements so they can be correctly displayed in viewers etc
(var panelsMesh, var mullionsMesh) = GetCurtainWallDisplayMesh(revitWall);
speckleWall["renderMaterial"] = new Other.RenderMaterial()
{
opacity = 0.2, diffuse = System.Drawing.Color.AliceBlue.ToArgb()
};
speckleWall.displayMesh = panelsMesh;
var mullions = new Base
{
["@displayMesh"] = mullionsMesh,
["renderMaterial"] = new Other.RenderMaterial()
{
diffuse = System.Drawing.Color.DarkGray.ToArgb()
}
};
speckleWall.elements = new List <Base> {
mullions
};
}
GetAllRevitParamsAndIds(speckleWall, revitWall, new List <string>
{
"WALL_USER_HEIGHT_PARAM",
"WALL_BASE_OFFSET",
"WALL_TOP_OFFSET",
"WALL_BASE_CONSTRAINT",
"WALL_HEIGHT_TYPE",
"WALL_STRUCTURAL_SIGNIFICANT"
});
GetHostedElements(speckleWall, revitWall);
//Report.Log($"Converted Wall {revitWall.Id}");
return(speckleWall);
}
/// <summary>
/// Create from an existing Revit Element
/// </summary>
/// <param name="wall"></param>
private Wall(Autodesk.Revit.DB.Wall wall)
{
SafeInit(() => InitWall(wall));
}
private DB.XYZ GetOffsetPlaneNormal(DB.Wall wall)
{
var offsetPlaneNormal = -(DB.XYZ.BasisZ);
return(wall.Flipped ? -offsetPlaneNormal : offsetPlaneNormal);
}
public static Wall Wrap(Autodesk.Revit.DB.Wall ele, bool isRevitOwned)
{
return(Wall.FromExisting(ele, isRevitOwned));
}
public static re.Element CreateWallOpening(re.Wall wall, dg.PolyCurve polyCrv)
{
try
{
// Try to get a wall from trace
rdb.Document doc = DocumentManager.Instance.CurrentDBDocument;
var openingElem = ElementBinder.GetElementFromTrace <rdb.Element>(doc);
rdb.Opening opening = null;
if (openingElem != null && openingElem.Id.IntegerValue != (int)rdb.BuiltInCategory.OST_SWallRectOpening)
{
opening = openingElem as rdb.Opening;
}
if (!VerifyRect(polyCrv))
{
if (opening != null)
{
TransactionManager.Instance.EnsureInTransaction(doc);
doc.Delete(opening.Id);
TransactionManager.Instance.TransactionTaskDone();
}
TaskDialog.Show("Test", "VerifyRect failed");
return(null);
}
// Find the two corner points.
if (!GetRectCorners(polyCrv, out rdb.XYZ corner0, out rdb.XYZ corner1))
{
if (opening != null)
{
TransactionManager.Instance.EnsureInTransaction(doc);
doc.Delete(opening.Id);
TransactionManager.Instance.TransactionTaskDone();
}
TaskDialog.Show("Test", "GetRectCorners failed");
return(null);
}
if (corner0 == null || corner1 == null)
{
if (opening != null)
{
TransactionManager.Instance.EnsureInTransaction(doc);
doc.Delete(opening.Id);
TransactionManager.Instance.TransactionTaskDone();
}
TaskDialog.Show("Test", "one of the corners is null");
return(null);
}
TransactionManager.Instance.EnsureInTransaction(doc);
// Purge the original element
if (opening != null)
{
doc.Delete(opening.Id);
}
// Build a new opening;
try
{
rdb.Wall w = wall.InternalElement as rdb.Wall;
rdb.Opening o = doc.Create.NewOpening(w, corner0, corner1);
re.Element rOpening = re.ElementWrapper.ToDSType(o, true) as re.Element;
TransactionManager.Instance.TransactionTaskDone();
ElementBinder.CleanupAndSetElementForTrace(doc, o);
return(rOpening);
}
catch (Exception ex)
{
TransactionManager.Instance.TransactionTaskDone();
TaskDialog.Show("CreateError", ex.ToString());
ElementBinder.CleanupAndSetElementForTrace(doc, null);
}
}
catch (Exception e)
{
Autodesk.Revit.UI.TaskDialog.Show("Test", "Error:\n" + e.ToString());
throw;
}
return(null);
}
private static void AddHost(Autodesk.Revit.DB.Wall wall, FamilyInstance familyInstance, Dictionary <BuiltInCategory, FamilySymbol> dictionary_FamilySymbol)
{
if (wall == null || familyInstance == null)
{
return;
}
XYZ xYZ = null;
if (familyInstance.Location is LocationPoint)
{
xYZ = ((LocationPoint)familyInstance.Location).Point;
}
else if (familyInstance.Location is LocationCurve)
{
xYZ = ((LocationCurve)familyInstance.Location).Curve.GetEndPoint(0);
}
if (xYZ == null)
{
return;
}
GeometryElement geometryElement = wall.get_Geometry(new Options());
BoundingBoxXYZ boundingBoxXYZ = geometryElement.GetBoundingBox();
if (xYZ.Z >= boundingBoxXYZ.Max.Z)
{
return;
}
if (xYZ.Z < boundingBoxXYZ.Min.Z)
{
return;
}
FamilySymbol familySymbol = null;
if (!dictionary_FamilySymbol.TryGetValue((BuiltInCategory)familyInstance.Category.Id.IntegerValue, out familySymbol))
{
return;
}
if (familySymbol == null)
{
return;
}
if (!familySymbol.IsActive)
{
familySymbol.Activate();
}
FamilyInstance familyInstance_Temp = wall.Document.Create.NewFamilyInstance(xYZ, familySymbol, wall, wall.Document.GetElement(wall.LevelId) as Level, Autodesk.Revit.DB.Structure.StructuralType.NonStructural);
if (familyInstance_Temp.FacingFlipped != familyInstance.FacingFlipped)
{
familyInstance_Temp.flipFacing();
}
if (familyInstance_Temp.HandFlipped != familyInstance.HandFlipped)
{
familyInstance_Temp.flipHand();
}
FamilySymbol aFamilySymbol_Source = familyInstance.Symbol;
Copy(familyInstance_Temp, familyInstance, "SAM_BuildingElementHeight", "Height");
Copy(familyInstance_Temp, familyInstance, "SAM_BuildingElementWidth", "Width");
Copy(familyInstance_Temp, familyInstance, "SAM_BuildingElementFrameWidth", "FrameThickness");
Copy(familyInstance_Temp, familyInstance, "Sill Height", "Sill Height");
Copy(familyInstance_Temp, familyInstance, "_Filter Comments 01", "Mark");
Copy(familyInstance_Temp, familyInstance, "_Filter Comments 03", "Description");
Parameter parameter;
parameter = familyInstance_Temp.get_Parameter(BuiltInParameter.ALL_MODEL_INSTANCE_COMMENTS);
if (parameter != null)
{
parameter.Set(familyInstance.Id.IntegerValue.ToString());
}
parameter = familyInstance_Temp.LookupParameter("SAM_BuildingElementDescription");
if (parameter != null)
{
parameter.Set(familyInstance.Name);
}
}
public void init()
{
SetDoorOffsetForm form = new SetDoorOffsetForm();
DialogResult result = form.ShowDialog();
if (result == DialogResult.OK)
{
offsetValue = form.getOffset();
}
List <Tuple <Autodesk.Revit.DB.FamilyInstance, Autodesk.Revit.DB.Wall> > selectedDoorsAndWalls = new List <Tuple <FamilyInstance, Wall> >();
try
{
while (true)
{
Autodesk.Revit.DB.FamilyInstance selectedDoor = null;
Autodesk.Revit.DB.Wall selectedWall = null;
while (selectedDoor == null)
{
Reference selectedReference = uidoc.Selection.PickObject(ObjectType.Element, "Select doors in order to set offset. Press ESC key when finished.");
if (selectedReference != null)
{
ElementId selectedElementId = selectedReference.ElementId;
if (selectedElementId != null)
{
Element selectedElement = this.doc.GetElement(selectedElementId);
if (selectedElement != null)
{
if (selectedElement.Category.Name == "Doors")
{
if (selectedElement is FamilyInstance)
{
selectedDoor = selectedElement as FamilyInstance;
}
}
else
{
TaskDialog.Show("Info", "Your selection is not a door, it will not be counted.");
}
}
}
}
}
while (selectedWall == null)
{
Reference selectedReference = uidoc.Selection.PickObject(ObjectType.Element, "Select a wall in order to set offset. Press ESC key when finished.");
if (selectedReference != null)
{
ElementId selectedElementId = selectedReference.ElementId;
if (selectedElementId != null)
{
Element selectedElement = this.doc.GetElement(selectedElementId);
if (selectedElement != null)
{
if (selectedElement is Wall)
{
selectedWall = selectedElement as Wall;
}
else
{
TaskDialog.Show("Info", "Your selection is not a wall it will not be counted.");
}
}
}
}
}
if ((selectedDoor != null) && (selectedWall != null))
{
selectedDoorsAndWalls.Add(new Tuple <FamilyInstance, Wall>(selectedDoor, selectedWall));
}
}
}
catch (Exception ex)
{
}
if (selectedDoorsAndWalls.Count > 0)
{
SetDoorOffsetHandler handler = new SetDoorOffsetHandler(selectedDoorsAndWalls, this.offsetValue);
ExternalEvent exEvent = ExternalEvent.Create(handler);
exEvent.Raise();
}
}
