ItemIDToIndex() public static method

public static ItemIDToIndex ( string ID ) : int
ID string
return int
示例#1
0
        public static void DecodeCAT34I060(byte[] Data)
        {
            // At this time we do not care about the content of CAT034I060.
            // However it is necessary to determine how many subfields of 8 octets
            // is present so that data buffer can be updated accordingly on order to
            // decode the other fileds of interest
            // NOTE: We assume that only first 7 defined subfuled

            // I034/050     Radar Plot Characteristics                          1 + 1+
            int Number_Of_Octets_Present = 1; // at least two, but that will be determined below

            // Decode 020
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("060")].HasBeenPresent == true)
            {
                // Get an instance of bit ops
                Bit_Ops BO = new Bit_Ops();

                //Extract the first octet
                BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 1];

                // Now check how many data octets is present.
                if (BO.DWord[CAT34I060Types.Subfiled_1] == true)
                {
                    Number_Of_Octets_Present++;
                }
                if (BO.DWord[CAT34I060Types.Subfiled_2] == true)
                {
                    Number_Of_Octets_Present++;
                }
                if (BO.DWord[CAT34I060Types.Subfiled_3] == true)
                {
                    Number_Of_Octets_Present++;
                }
                if (BO.DWord[CAT34I060Types.Subfiled_4] == true)
                {
                    Number_Of_Octets_Present++;
                }
                if (BO.DWord[CAT34I060Types.Subfiled_5] == true)
                {
                    Number_Of_Octets_Present++;
                }
                if (BO.DWord[CAT34I060Types.Subfiled_6] == true)
                {
                    Number_Of_Octets_Present++;
                }
                if (BO.DWord[CAT34I060Types.Subfiled_7] == true)
                {
                    Number_Of_Octets_Present++;
                }

                // Increase data buffer index so it ready for the next data item.
                CAT34.CurrentDataBufferOctalIndex = CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present;
            }
        }
示例#2
0
        public static void DecodeCAT34I020(byte[] Data)
        {
            // Get an instance of bit ops
            Bit_Ops BO = new Bit_Ops();

            //Extract the first octet
            BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 1];

            double Result = 0.0;

            if (BO.DWord[Bit_Ops.Bit0] == true)
            {
                Result = LSB_1;
            }
            if (BO.DWord[Bit_Ops.Bit1] == true)
            {
                Result = Result + LSB_2;
            }
            if (BO.DWord[Bit_Ops.Bit2] == true)
            {
                Result = Result + LSB_3;
            }
            if (BO.DWord[Bit_Ops.Bit3] == true)
            {
                Result = Result + LSB_4;
            }
            if (BO.DWord[Bit_Ops.Bit4] == true)
            {
                Result = Result + LSB_5;
            }
            if (BO.DWord[Bit_Ops.Bit5] == true)
            {
                Result = Result + LSB_6;
            }
            if (BO.DWord[Bit_Ops.Bit6] == true)
            {
                Result = Result + LSB_7;
            }
            if (BO.DWord[Bit_Ops.Bit7] == true)
            {
                Result = Result + LSB_8;
            }

            //////////////////////////////////////////////////////////////////////////////////
            // Now assign it to the generic list
            CAT34.I034DataItems[CAT34.ItemIDToIndex("020")].value = Result;
            //////////////////////////////////////////////////////////////////////////////////

            // Leave it at the current index for the next decode
            CAT34.CurrentDataBufferOctalIndex = CAT34.CurrentDataBufferOctalIndex + 1;
        }
示例#3
0
        public static void DecodeCAT34I000(byte[] Data)
        {
            // First define CAT34I000 class
            CAT34I000UserData MyCAT34I000UserData = new CAT34I000UserData();

            // Get an instance of bit ops
            Bit_Ops BO = new Bit_Ops();

            //Extract the first octet
            BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex];

            int result = BO.DWord[Bit_Ops.Bits0_7_Of_DWord];

            switch (result)
            {
            case 1:
                MyCAT34I000UserData.Message_Type = CAT34I000Types.Message_Type.North_Marker_Msg;
                FormMain MainFrame = Application.OpenForms[0] as FormMain;
                MainFrame.HandleNorthMarkMessage();
                break;

            case 2:
                MyCAT34I000UserData.Message_Type = CAT34I000Types.Message_Type.Sector_Crossing_Msg;
                break;

            case 3:
                MyCAT34I000UserData.Message_Type = CAT34I000Types.Message_Type.Geographical_Filtering_Msg;
                break;

            case 4:
                MyCAT34I000UserData.Message_Type = CAT34I000Types.Message_Type.Jamming_Strobe_Msg;
                break;

            default:
                break;
            }

            //////////////////////////////////////////////////////////////////////////////////
            // Now assign it to the generic list
            CAT34.I034DataItems[CAT34.ItemIDToIndex("000")].value = MyCAT34I000UserData.Message_Type;
            //////////////////////////////////////////////////////////////////////////////////
        }
示例#4
0
        public static void DecodeCAT34I050(byte[] Data)
        {
            // At this time we do not care about the content of CAT034I050.
            // However it is necessary to determine how many subfields of 8 octets
            // is present so that data buffer can be updated accordingly in order to
            // decode the other fileds of interest
            // NOTE: We assume that only first 7 defined subfields are present

            // I034/050     System Configuration and Status                          1 + 1+
            int Number_Of_Octets_Present = 1; // at least two, but that will be determined below

            // Decode 020
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("050")].HasBeenPresent == true)
            {
                // Get an instance of bit ops
                Bit_Ops BO = new Bit_Ops();
                Bit_Ops CAT34_I050_Data = new Bit_Ops();

                //Extract the first octet
                BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 1];

                CAT34I050Types.CAT34I050UserData ThisCycleData = new CAT34I050Types.CAT34I050UserData();

                ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
                // Now check how many data octets is present and decode the present subfileds at the same time
                ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////


                //////////////////////////////////////////////////////////////////////////////////
                // COM - Common elements of a System
                //////////////////////////////////////////////////////////////////////////////////
                if (BO.DWord[CAT34I050Types.Subfiled_1] == true)
                {
                    Number_Of_Octets_Present++;
                    CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
                    ThisCycleData.COM_Data.Data_Present             = true;

                    ThisCycleData.COM_Data.System_is_NOGO             = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_1];
                    ThisCycleData.COM_Data.RDPC2_Selected             = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2];
                    ThisCycleData.COM_Data.RDPC_Reset                 = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3];
                    ThisCycleData.COM_Data.RDP_Overloaded             = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_4];
                    ThisCycleData.COM_Data.Transmision_Sys_Overloaded = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_5];
                    ThisCycleData.COM_Data.Monitor_Sys_Disconected    = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_6];
                    ThisCycleData.COM_Data.Time_Source_Invalid        = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_7];
                }
                //////////////////////////////////////////////////////////////////////////////////
                // Spare
                //////////////////////////////////////////////////////////////////////////////////

                if (BO.DWord[CAT34I050Types.Subfiled_2] == true)
                {
                    Number_Of_Octets_Present++;
                    CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
                }
                //////////////////////////////////////////////////////////////////////////////////
                // Spare
                //////////////////////////////////////////////////////////////////////////////////

                if (BO.DWord[CAT34I050Types.Subfiled_3] == true)
                {
                    Number_Of_Octets_Present++;
                    CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
                }
                //////////////////////////////////////////////////////////////////////////////////
                // PSR - Primary sensor component
                //////////////////////////////////////////////////////////////////////////////////
                if (BO.DWord[CAT34I050Types.Subfiled_4] == true)
                {
                    Number_Of_Octets_Present++;
                    CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
                    ThisCycleData.PSR_Data.Data_Present             = true;

                    ThisCycleData.PSR_Data.Ant_2_Selected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_1];
                    if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == true)
                    {
                        ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.Channel_A_and_B;
                    }
                    else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == false && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == false)
                    {
                        ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.No_Channel;
                    }
                    else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true)
                    {
                        ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.Channel_A;
                    }
                    else
                    {
                        ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.Channel_B;
                    }

                    ThisCycleData.PSR_Data.PSR_Overloaded          = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_4];
                    ThisCycleData.PSR_Data.Monitor_Sys_Disconected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_5];
                }
                //////////////////////////////////////////////////////////////////////////////////
                // SSR - Secondary sensor component
                //////////////////////////////////////////////////////////////////////////////////
                if (BO.DWord[CAT34I050Types.Subfiled_5] == true)
                {
                    Number_Of_Octets_Present++;
                    CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
                    ThisCycleData.SSR_Data.Data_Present             = true;

                    ThisCycleData.SSR_Data.Ant_2_Selected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_1];
                    if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == true)
                    {
                        ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.Invalid_Combination;
                    }
                    else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == false && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == false)
                    {
                        ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.No_Channel;
                    }
                    else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true)
                    {
                        ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.Channel_A;
                    }
                    else
                    {
                        ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.Channel_B;
                    }

                    ThisCycleData.SSR_Data.SSR_Overloaded          = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_4];
                    ThisCycleData.SSR_Data.Monitor_Sys_Disconected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_5];
                }
                //////////////////////////////////////////////////////////////////////////////////
                // MDS - Mode-S sensor component
                //////////////////////////////////////////////////////////////////////////////////

                if (BO.DWord[CAT34I050Types.Subfiled_6] == true)
                {
                    Number_Of_Octets_Present++;
                    // Mode S subfield is 2 octets
                    CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
                    ThisCycleData.MDS_Data.Data_Present             = true;


                    ThisCycleData.MDS_Data.Ant_2_Selected = BO.DWord[CAT34I050Types.Subfiled_1];

                    if (BO.DWord[CAT34I050Types.Subfiled_3] == true && BO.DWord[CAT34I050Types.Subfiled_2] == true)
                    {
                        ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.Illegal_Combination;
                    }
                    else if (BO.DWord[CAT34I050Types.Subfiled_3] == false && BO.DWord[CAT34I050Types.Subfiled_2] == false)
                    {
                        ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.No_Channel;
                    }
                    else if (BO.DWord[CAT34I050Types.Subfiled_3] == true)
                    {
                        ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.Channel_A;
                    }
                    else
                    {
                        ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.Channel_B;
                    }

                    ThisCycleData.MDS_Data.ModeS_Overloaded            = BO.DWord[CAT34I050Types.Subfiled_4];
                    ThisCycleData.MDS_Data.Monitor_Sys_Disconected     = BO.DWord[CAT34I050Types.Subfiled_5];
                    ThisCycleData.MDS_Data.CH2_For_Coordination_In_Use = BO.DWord[CAT34I050Types.Subfiled_6];
                    ThisCycleData.MDS_Data.CH2_For_DataLink_In_Use     = BO.DWord[CAT34I050Types.Subfiled_7];
                    ThisCycleData.MDS_Data.Coordination_Func_Overload  = BO.DWord[CAT34I050Types.FX_Primary_Subfiled]; // Not really FX but the index is correct

                    Number_Of_Octets_Present++;
                    // Mode S subfield is 2 octets
                    CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];

                    ThisCycleData.MDS_Data.DataLink_Func_Overload = BO.DWord[CAT34I050Types.Subfiled_1];
                }
                //////////////////////////////////////////////////////////////////////////////////
                // Spare
                //////////////////////////////////////////////////////////////////////////////////

                if (BO.DWord[CAT34I050Types.Subfiled_7] == true)
                {
                    Number_Of_Octets_Present++;
                    CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
                }

                //////////////////////////////////////////////////////////////////////////////////
                // Now assign it to the generic list
                CAT34.I034DataItems[CAT34.ItemIDToIndex("050")].value = ThisCycleData;
                //////////////////////////////////////////////////////////////////////////////////

                // Increase data buffer index so it ready for the next data item.
                CAT34.CurrentDataBufferOctalIndex = CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present;
            }
        }
示例#5
0
        public static void DecodeCAT34I030(byte[] Data)
        {
            CAT34I030Types.CAT34I030_Time_Of_The_Day_User_Type MyCAT34I030 = new CAT34I030Types.CAT34I030_Time_Of_The_Day_User_Type();

            // Get an instance of bit ops
            Bit_Ops BO = new Bit_Ops();

            //Extract the first octet
            BO.DWord[Bit_Ops.Bits0_7_Of_DWord]   = Data[CAT34.CurrentDataBufferOctalIndex + 3];
            BO.DWord[Bit_Ops.Bits8_15_Of_DWord]  = Data[CAT34.CurrentDataBufferOctalIndex + 2];
            BO.DWord[Bit_Ops.Bits16_23_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 1];

            double Result = 0.0;

            if (BO.DWord[Bit_Ops.Bit0] == true)
            {
                Result = LSB_1;
            }
            if (BO.DWord[Bit_Ops.Bit1] == true)
            {
                Result = Result + LSB_2;
            }
            if (BO.DWord[Bit_Ops.Bit2] == true)
            {
                Result = Result + LSB_3;
            }
            if (BO.DWord[Bit_Ops.Bit3] == true)
            {
                Result = Result + LSB_4;
            }
            if (BO.DWord[Bit_Ops.Bit4] == true)
            {
                Result = Result + LSB_5;
            }
            if (BO.DWord[Bit_Ops.Bit5] == true)
            {
                Result = Result + LSB_6;
            }
            if (BO.DWord[Bit_Ops.Bit6] == true)
            {
                Result = Result + LSB_7;
            }
            if (BO.DWord[Bit_Ops.Bit7] == true)
            {
                Result = Result + LSB_8;
            }
            if (BO.DWord[Bit_Ops.Bit8] == true)
            {
                Result = Result + LSB_9;
            }
            if (BO.DWord[Bit_Ops.Bit9] == true)
            {
                Result = Result + LSB_10;
            }
            if (BO.DWord[Bit_Ops.Bit10] == true)
            {
                Result = Result + LSB_11;
            }
            if (BO.DWord[Bit_Ops.Bit11] == true)
            {
                Result = Result + LSB_12;
            }
            if (BO.DWord[Bit_Ops.Bit12] == true)
            {
                Result = Result + LSB_13;
            }
            if (BO.DWord[Bit_Ops.Bit13] == true)
            {
                Result = Result + LSB_14;
            }
            if (BO.DWord[Bit_Ops.Bit14] == true)
            {
                Result = Result + LSB_15;
            }
            if (BO.DWord[Bit_Ops.Bit15] == true)
            {
                Result = Result + LSB_16;
            }
            if (BO.DWord[Bit_Ops.Bit16] == true)
            {
                Result = Result + LSB_17;
            }
            if (BO.DWord[Bit_Ops.Bit17] == true)
            {
                Result = Result + LSB_18;
            }
            if (BO.DWord[Bit_Ops.Bit18] == true)
            {
                Result = Result + LSB_19;
            }
            if (BO.DWord[Bit_Ops.Bit19] == true)
            {
                Result = Result + LSB_20;
            }
            if (BO.DWord[Bit_Ops.Bit20] == true)
            {
                Result = Result + LSB_21;
            }
            if (BO.DWord[Bit_Ops.Bit21] == true)
            {
                Result = Result + LSB_22;
            }
            if (BO.DWord[Bit_Ops.Bit22] == true)
            {
                Result = Result + LSB_23;
            }
            if (BO.DWord[Bit_Ops.Bit23] == true)
            {
                Result = Result + LSB_24;
            }

            MyCAT34I030.Time_Of_The_Day_In_Sec_Since_Midnight_UTC = Result;

            // Compute the time in a human friendy form
            // from sec.miliec since midnight UTC.
            double hrs, sec, min, milis;

            hrs = Math.Floor(Result / 3600.00);
            double tmp = (Result - (hrs * 3600.0)) / 60;

            min   = Math.Floor(tmp);
            tmp   = (tmp * 60.0) - (min * 60.0);
            sec   = Math.Floor(tmp);
            milis = (tmp - sec) * 1000.0;

            MyCAT34I030.TimeOfDay = new TimeSpan(0, (int)hrs, (int)min, (int)sec, (int)milis);

            //////////////////////////////////////////////////////////////////////////////////
            // Now assign it to the generic list
            CAT34.I034DataItems[CAT34.ItemIDToIndex("030")].value = MyCAT34I030;
            //////////////////////////////////////////////////////////////////////////////////

            // Leave it at the current index for the next decode
            CAT34.CurrentDataBufferOctalIndex = CAT34.CurrentDataBufferOctalIndex + 3;
        }
示例#6
0
        // This method will accept a buffer of data with the assumption that
        // category has been determined. It will then decode the data and save
        // it in the shared buffer. Everry time a message is passed in the data
        // will be appended to the buffer. This means that each line will contain
        // data for one message. For data items which are not in the message,
        // indicated by the FSPEC field, N/A will be inserted instead. The shared
        // buffer is loacted in the SharedData and will not be saved. It is responsibility
        // of the user to save the data in a file it desired.
        public static void Do(byte[] Data)
        {
            /////////////////////////////////////////////////////////////////////////
            //
            // Next version of Category 002: PSR Radar, M-SSR Radar, Mode-S Station
            //                                               Length in bytes
            //

            // I002/000, Message Type                        1
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("000")].CurrentlyPresent == true)
            {
                CAT34I000UserData.DecodeCAT34I000(Data);
            }

            // 3 I034/030 Time-of-Day                           3
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("030")].CurrentlyPresent == true)
            {
                CAT34I030UserData.DecodeCAT34I030(Data);
            }
            // 4 I034/020 Sector Number                         1
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("020")].CurrentlyPresent == true)
            {
                CAT34I020UserData.DecodeCAT34I020(Data);
            }
            // 5 I034/041 Antenna Rotation Period               2
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("041")].CurrentlyPresent == true)
            {
                CAT34I041UserData.DecodeCAT34I041(Data);
            }
            // 6 I034/050 System Configuration and Status       1+
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("050")].CurrentlyPresent == true)
            {
                CAT34I050UserData.DecodeCAT34I050(Data);
            }
            // 7 I034/060 System Processing Mode                1+
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("060")].CurrentlyPresent == true)
            {
                CAT34I060UserData.DecodeCAT34I060(Data);
            }
            // FX

            // 8 I034/070 Message Count Values                  1+2N
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("070")].CurrentlyPresent == true)
            {
                CAT34I070UserData.DecodeCAT34I070(Data);
            }
            // 9 I034/100 Generic Polar Window                  8
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("100")].CurrentlyPresent == true)
            {
                CAT34I100UserData.DecodeCAT34I100(Data);
            }
            // 10 I034/110 Data Filter                          1
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("110")].CurrentlyPresent == true)
            {
                CAT34I110UserData.DecodeCAT34I110(Data);
            }
            // 11 I034/120 3D-Position of Data Source           8
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("120")].CurrentlyPresent == true)
            {
                CAT34I120UserData.DecodeCAT34I120(Data);
            }
            // 12 I034/090 Collimation Error                    2
            if (CAT34.I034DataItems[CAT34.ItemIDToIndex("090")].CurrentlyPresent == true)
            {
                CAT34I090UserData.DecodeCAT34I090(Data);
            }

            ////////////////////////////////////////////////////////////////////////////////////
            // All CAT34 data has been decoded, so lets save off the message data to the global
            // storage for latter usage

            MainASTERIXDataStorage.CAT34Data CAT34MessageData = new MainASTERIXDataStorage.CAT34Data();
            foreach (CAT34.CAT34DataItem Item in CAT34.I034DataItems)
            {
                CAT34.CAT34DataItem MyItem = new CAT34.CAT34DataItem();
                MyItem.CurrentlyPresent = Item.CurrentlyPresent;
                MyItem.Description      = Item.Description;
                MyItem.HasBeenPresent   = Item.HasBeenPresent;
                MyItem.ID    = Item.ID;
                MyItem.value = Item.value;
                CAT34MessageData.CAT34DataItems.Add(MyItem);
            }
            MainASTERIXDataStorage.CAT34Message.Add(CAT34MessageData);
            CAT34.Intitialize(false);
        }