/// <summary>
/// Метод выполняет операцию выдавливания
/// для последнего созданного эскиза
/// </summary>
/// <param name="depth">Глубина выдавливания</param>
public bool DoOperationExtrusion(double depth)
{
try
{
ksEntityCollection coll = (ksEntityCollection)_app.Part.EntityCollection((short)Obj3dType.o3d_sketch);
int i = coll.GetCount();
ksEntity sketch = coll.GetByIndex(i - 1);
ksEntity entityExtr = (ksEntity)_app.Part.NewEntity((short)Obj3dType.o3d_baseExtrusion);
if (entityExtr != null)
{
ksBaseExtrusionDefinition extrusionDef = (ksBaseExtrusionDefinition)entityExtr.GetDefinition();
if (extrusionDef != null)
{
extrusionDef.directionType = (short)Direction_Type.dtMiddlePlane;
}
extrusionDef.SetSideParam(true, (short)End_Type.etBlind, depth);
extrusionDef.SetSketch(sketch);
entityExtr.Create();
entityExtr.Update();
}
return(true);
}
catch
{
return(false);
}
}
/// <summary>
/// Метод создает фаску в 45'
/// </summary>
public bool Create(double dist, Point3d coor)
{
try
{
ksEntityCollection edge = (ksEntityCollection)_app.Part.EntityCollection((short)Obj3dType.o3d_edge);
if ((edge != null) && (edge.SelectByPoint(coor.X, coor.Y, coor.Z)) && (edge.GetCount() != 0))
{
ksEntity chamfer = (ksEntity)_app.Part.NewEntity((short)Obj3dType.o3d_chamfer);
ksChamferDefinition chDef = (ksChamferDefinition)chamfer.GetDefinition();
if (chDef != null)
{
chDef.tangent = true;
chDef.SetChamferParam(false, dist, dist);
ksEntityCollection chamferCollection = (ksEntityCollection)chDef.array();
chamferCollection.Clear();
chamferCollection.Add(edge.GetByIndex(0));
chamfer.Create();
}
}
return(true);
}
catch
{
return(false);
}
}
/// <summary>
/// создание фаски
/// </summary>
/// <param name="param"></param>
public void CreateChamfer(Parameters param)
{
double Lenght1 = param.Lenght1;
double Lenght2 = param.Lenght2;
double Angle1 = param.Angle1;
var doc = (ksDocument3D)_kompas.ActiveDocument3D();
ksPart part2 = (ksPart)doc.GetPart((short)Part_Type.pTop_Part); // новый компонент
if (part2 != null)
{
ksEntityCollection collect2 = (ksEntityCollection)part2.EntityCollection((short)Obj3dType.o3d_face);
if (collect2 != null && collect2.SelectByPoint(0, 0, Lenght1 + 5 + Lenght2) && collect2.GetCount() != 0)
{
ksEntity entityChamfer = (ksEntity)part2.NewEntity((short)Obj3dType.o3d_chamfer);
if (entityChamfer != null)
{
ksChamferDefinition ChamferDef = (ksChamferDefinition)entityChamfer.GetDefinition();
if (ChamferDef != null)
{
ChamferDef.tangent = false;
ChamferDef.SetChamferParam(true, Angle1, Angle1);
ksEntityCollection arr = (ksEntityCollection)ChamferDef.array(); // динамический массив объектов
if (arr != null)
{
for (int i = 0, count = collect2.GetCount(); i < count; i++)
{
arr.Add(collect2.GetByIndex(i));
}
entityChamfer.Create();
}
}
}
}
}
}
/// <summary>
/// Метод копирует последнюю операцию
/// по концентрической окружности относительно оси OY
/// </summary>
/// <param name="count">Количество копий</param>
public bool CreateOperationCircPartArray(int count)
{
try
{
ksEntityCollection elemCol = (ksEntityCollection)_app.Part.EntityCollection((short)Obj3dType.o3d_cutExtrusion);
if ((elemCol != null) && (elemCol.GetCount() != 0))
{
ksEntity axis = (ksEntity)_app.Part.NewEntity((short)Obj3dType.o3d_axisOY);
ksEntity circCopy = (ksEntity)_app.Part.NewEntity((short)Obj3dType.o3d_circularCopy);
ksCircularCopyDefinition CopyDef = (ksCircularCopyDefinition)circCopy.GetDefinition();
if (CopyDef != null)
{
CopyDef.count1 = 1;
CopyDef.count2 = count;
CopyDef.step2 = 360;
CopyDef.factor2 = true;
CopyDef.SetAxis(axis);
ksEntityCollection copiedElemCol = (ksEntityCollection)CopyDef.GetOperationArray();
copiedElemCol.Clear();
int i = elemCol.GetCount();
copiedElemCol.Add(elemCol.GetByIndex(i - 1));
circCopy.Create();
}
}
return(true);
}
catch
{
return(false);
}
}
public void Fillet(ksPart iPart, int index, double radius, TeaPotParams teaPotParams)
{
// Получение интерфейса объекта скругление
ksEntity entityFillet = (ksEntity)iPart.NewEntity((int)Obj3dType.o3d_fillet);
// Получаем интерфейс параметров объекта скругление
ksFilletDefinition filletDefinition = (ksFilletDefinition)entityFillet.GetDefinition();
// Радиус скругления
filletDefinition.radius = radius;
// Не продолжать по касательным ребрам
filletDefinition.tangent = true;
// Получаем массив граней объекта
ksEntityCollection entityCollectionPart = (ksEntityCollection)iPart.EntityCollection((int)Obj3dType.o3d_face);
// Получаем массив скругляемых граней
ksEntityCollection entityCollectionFillet = (ksEntityCollection)filletDefinition.array();
entityCollectionFillet.Clear();
//ksEntity ENT = entityCollectionFillet.GetByIndex(0);
// Заполняем массив скругляемых объектов
entityCollectionFillet.Add(entityCollectionPart.GetByIndex(index));
// Создаем скругление
int X = Convert.ToInt32(teaPotParams.TeaPotHandleColor);
entityFillet.SetAdvancedColor(X, 2, 2, 2, 2, 1, 2);
entityFillet.Create();
}
/// <summary>
/// Скругление
/// </summary>
private void Filled(ksEntity ksEntity)
{
const int grayColor = 16777215;
ksEntity ksEntityFilled = (ksEntity)_ksPart.NewEntity(
(short)Obj3dType.o3d_fillet);
ksFilletDefinition ksFilletDefinition =
(ksFilletDefinition)ksEntityFilled.GetDefinition();
ksFilletDefinition.radius = 2;
ksFilletDefinition.tangent = false;
ksEntityCollection ksEntityCollectionPart =
(ksEntityCollection)_ksPart.EntityCollection(
(short)Obj3dType.o3d_edge);
ksEntityCollection ksEntityCollectionFillet =
(ksEntityCollection)ksFilletDefinition.array();
ksEntityCollectionFillet.Clear();
ksEntityCollectionFillet.Add(ksEntityCollectionPart.GetByIndex(1));
ksEntityCollectionFillet.Add(ksEntityCollectionPart.GetByIndex(0));
ksEntityFilled.useColor = 0;
ksEntityFilled.SetAdvancedColor(grayColor, 0.9, 0.8,
0.7, 0.6, 1, 0.4);
ksEntityFilled.Create();
}
public override ksEntity Execute()
{
_extrudeHandleCmd.Execute();
ksEntity fillet = Part.NewEntity((short)Obj3dType.o3d_fillet);
ksFilletDefinition filletDefinition = fillet.GetDefinition();
filletDefinition.radius = 1;
filletDefinition.tangent = false;
ksEntityCollection facesToFillet = filletDefinition.array();
facesToFillet.Clear();
ksEntityCollection partFaces = Part.EntityCollection((short)Obj3dType.o3d_face);
for (int i = 0; i < partFaces.GetCount(); i++)
{
facesToFillet.Add(partFaces.GetByIndex(i));
}
fillet.Create();
return(fillet);
}
