public override void OnMouseUp(MouseEventArgs mouseEvent)
{
if (CurrentTrackingType != TrackBallTransformType.None)
{
if (CurrentTrackingType == TrackBallTransformType.Rotation)
{
EndRotateAroundOrigin();
// try and preserve some of the velocity
motionQueue.AddMoveToMotionQueue(mouseEvent.Position, UiThread.CurrentTimerMs);
if (!Keyboard.IsKeyDown(Keys.ShiftKey))
{
currentVelocityPerMs = motionQueue.GetVelocityPixelsPerMs();
if (currentVelocityPerMs.LengthSquared > 0)
{
Vector2 center = LocalBounds.Center;
StartRotateAroundOrigin(center);
runningInterval = UiThread.SetInterval(ApplyVelocity, 1.0 / updatesPerSecond);
}
}
}
CurrentTrackingType = TrackBallTransformType.None;
}
base.OnMouseUp(mouseEvent);
}
public override void PageIsBecomingActive()
{
bedStartingTemp = printer.Connection.ActualBedTemperature;
runningInterval = UiThread.SetInterval(ShowTempChangeProgress, 1);
if (bedTargetTemp > 0)
{
// start heating the bed and show our progress
printer.Connection.TargetBedTemperature = bedTargetTemp;
}
if (hotEndTargetTemp > 0)
{
// start heating the hot end and show our progress
printer.Connection.SetTargetHotendTemperature(0, hotEndTargetTemp);
}
NextButton.Enabled = false;
// if we are trying to go to a temp of 0 than just move on to next window
if (bedTargetTemp == 0 && hotEndTargetTemp == 0)
{
// advance to the next page
UiThread.RunOnIdle(() => NextButton.InvokeClick());
}
base.PageIsBecomingActive();
}
public GamePlatform(int framesPerSecond, int maxUpdatesPerDraw, double width, double height)
: base(width, height)
{
AnchorAll();
showFrameRate = true;
secondsPerUpdate = 1.0 / (double)framesPerSecond;
this.maxUpdatesPerDraw = maxUpdatesPerDraw;
AudioSystem.Startup();
UiThread.SetInterval(OnIdle, secondsPerUpdate);
}
private void DirectoryContentsChanged(object sender, EventArgs e)
{
// Flag for reload
isDirty = true;
lastTimeContentsChanged = UiThread.CurrentTimerMs;
// Only refresh content if we're the active container
if (isActiveContainer &&
waitingForRefresh == null)
{
waitingForRefresh = UiThread.SetInterval(WaitToRefresh, .5);
}
}
private void ConnectToWidget(object drawingWidget, DrawEventArgs e)
{
GuiWidget parent = drawingWidget as GuiWidget;
while (parent.BackgroundColor.Alpha0To255 == 0)
{
parent = parent.Parent;
}
startColor = parent.BackgroundColor;
timeSinceStart = Stopwatch.StartNew();
widgetToHighlight.AfterDraw -= ConnectToWidget;
var runningInterval = UiThread.SetInterval(ChangeBackgroundColor, animationDelay);
parent.Closed += (s, e2) => runningInterval.Continue = false;
}
public FindBedHeight(ISetupWizard setupWizard,
string pageDescription,
string setZHeightCoarseInstruction1,
string setZHeightCoarseInstruction2,
double moveDistance,
List <PrintLevelingWizard.ProbePosition> probePositions,
int probePositionsBeingEditedIndex)
: base(setupWizard, pageDescription, setZHeightCoarseInstruction1)
{
this.probePositions = probePositions;
this.moveAmount = moveDistance;
this.lastReportedPosition = printer.Connection.LastReportedPosition;
this.probePositionsBeingEditedIndex = probePositionsBeingEditedIndex;
GuiWidget spacer = new GuiWidget(15, 15);
contentRow.AddChild(spacer);
FlowLayoutWidget zButtonsAndInfo = new FlowLayoutWidget();
zButtonsAndInfo.HAnchor |= Agg.UI.HAnchor.Center;
FlowLayoutWidget zButtons = CreateZButtons();
zButtonsAndInfo.AddChild(zButtons);
zButtonsAndInfo.AddChild(new GuiWidget(15, 10));
// textFields
TextWidget zPosition = new TextWidget("Z: 0.0 ", pointSize: 12, textColor: theme.TextColor)
{
VAnchor = VAnchor.Center,
Margin = new BorderDouble(10, 0),
};
runningInterval = UiThread.SetInterval(() =>
{
Vector3 destinationPosition = printer.Connection.CurrentDestination;
zPosition.Text = "Z: {0:0.00}".FormatWith(destinationPosition.Z);
}, .3);
zButtonsAndInfo.AddChild(zPosition);
contentRow.AddChild(zButtonsAndInfo);
contentRow.AddChild(
this.CreateTextField(setZHeightCoarseInstruction2));
}
public InlineEditControl(string defaultSizeString = "-0000.00", Agg.Font.Justification justification = Agg.Font.Justification.Left)
{
base.Visible = false;
double pointSize = 12;
numberDisplay = new TextWidget(defaultSizeString, 0, 0, pointSize, justification: justification)
{
Visible = false,
VAnchor = VAnchor.Bottom,
HAnchor = HAnchor.Left,
Text = "0",
};
AddChild(numberDisplay);
numberEdit = new NumberEdit(0, 50, 50, pointSize, pixelWidth: numberDisplay.Width, allowNegatives: true, allowDecimals: true)
{
Visible = false,
VAnchor = VAnchor.Bottom,
HAnchor = HAnchor.Left,
SelectAllOnFocus = true,
};
numberEdit.InternalNumberEdit.TextChanged += (s, e) =>
{
numberDisplay.Text = GetDisplayString == null ? "None" : GetDisplayString.Invoke(Value);
base.OnTextChanged(e);
};
numberEdit.InternalNumberEdit.MaxDecimalsPlaces = 2;
numberEdit.EditComplete += (s, e) =>
{
EditComplete?.Invoke(this, e);
timeSinceMouseUp.Restart();
numberEdit.Visible = false;
numberDisplay.Visible = true;
};
AddChild(numberEdit);
VAnchor = VAnchor.Fit;
HAnchor = HAnchor.Fit;
var runningInterval = UiThread.SetInterval(HideIfApplicable, .1);
this.Closed += (s, e) => runningInterval.Continue = false;
}
private void LookForTempRequest(object sender, EventArgs e)
{
var stringEvent = e as StringEventArgs;
if (stringEvent != null &&
stringEvent.Data.Contains("M104"))
{
startingTemp = printer.Connection.GetActualHotendTemperature(0);
RunningInterval runningInterval = null;
runningInterval = UiThread.SetInterval(() =>
{
runningInterval.Continue = !HasBeenClosed && progressBar.RatioComplete < 1;
progressBar.Visible = true;
double targetTemp = printer.Connection.GetTargetHotendTemperature(0);
double actualTemp = printer.Connection.GetActualHotendTemperature(0);
double totalDelta = targetTemp - startingTemp;
double currentDelta = actualTemp - startingTemp;
double ratioDone = totalDelta != 0 ? (currentDelta / totalDelta) : 1;
progressBar.RatioComplete = Math.Min(Math.Max(0, ratioDone), 1);
progressBarText.Text = $"Temperature: {actualTemp:0} / {targetTemp:0}";
}, 1);
}
}
public override void OnMouseUp(MouseEventArgs mouseEvent)
{
if (!LockTrackBall && TrackBallController.CurrentTrackingType != TrackBallTransformType.None)
{
if (TrackBallController.CurrentTrackingType == TrackBallTransformType.Rotation)
{
// try and preserve some of the velocity
motionQueue.AddMoveToMotionQueue(mouseEvent.Position, UiThread.CurrentTimerMs);
if (!Keyboard.IsKeyDown(Keys.ShiftKey))
{
currentVelocityPerMs = motionQueue.GetVelocityPixelsPerMs();
if (currentVelocityPerMs.LengthSquared > 0)
{
runningInterval = UiThread.SetInterval(ApplyVelocity, 1.0 / updatesPerSecond);
}
}
}
TrackBallController.OnMouseUp();
}
base.OnMouseUp(mouseEvent);
}
public override void OnLoad(EventArgs args)
{
// hook our parent so we can turn off the bed when we are done with leveling
this.DialogWindow.Closed += WizardWindow_Closed;
bedStartingTemp = printer.Connection.ActualBedTemperature;
runningInterval = UiThread.SetInterval(ShowTempChangeProgress, 1);
if (bedTargetTemp > 0)
{
// start heating the bed and show our progress
printer.Connection.TargetBedTemperature = bedTargetTemp;
}
for (int i = 0; i < targetHotendTemps.Length; i++)
{
if (targetHotendTemps[i] > 0)
{
// start heating the hot end and show our progress
printer.Connection.SetTargetHotendTemperature(i, targetHotendTemps[i]);
}
}
NextButton.Enabled = false;
// if we are trying to go to a temp of 0 than just move on to next window
if (bedTargetTemp == 0 &&
targetHotendTemps.All(i => i == 0))
{
// advance to the next page
UiThread.RunOnIdle(() => NextButton.InvokeClick());
}
base.OnLoad(args);
}
protected override IEnumerator <WizardPage> GetPages()
{
var extruderCount = printer.Settings.GetValue <int>(SettingsKey.extruder_count);
var levelingStrings = new LevelingStrings();
var title = "Unload Material".Localize();
var instructions = "Please select the material you want to unload.".Localize();
if (extruderCount > 1)
{
instructions = "Please select the material you want to unload from extruder {0}.".Localize().FormatWith(extruderIndex + 1);
}
// select the material
yield return(new SelectMaterialPage(this, title, instructions, "Unload".Localize(), extruderIndex, false, false)
{
WindowTitle = Title
});
var theme = ApplicationController.Instance.Theme;
// wait for extruder to heat
{
var targetHotendTemp = printer.Settings.Helpers.ExtruderTargetTemperature(extruderIndex);
var temps = new double[4];
temps[extruderIndex] = targetHotendTemp;
yield return(new WaitForTempPage(
this,
"Waiting For Printer To Heat".Localize(),
(extruderCount > 1 ? "Waiting for hotend {0} to heat to ".Localize().FormatWith(extruderIndex + 1) : "Waiting for the hotend to heat to ".Localize()) + targetHotendTemp + "°C.\n"
+ "This will ensure that filament is able to flow through the nozzle.".Localize() + "\n"
+ "\n"
+ "Warning! The tip of the nozzle will be HOT!".Localize() + "\n"
+ "Avoid contact with your skin.".Localize(),
0,
temps));
}
// show the unloading filament progress bar
{
int extruderPriorToUnload = printer.Connection.ActiveExtruderIndex;
RunningInterval runningGCodeCommands = null;
var unloadingFilamentPage = new WizardPage(this, "Unloading Filament".Localize(), "")
{
PageLoad = (page) =>
{
page.NextButton.Enabled = false;
// add the progress bar
var holder = new FlowLayoutWidget()
{
Margin = new BorderDouble(3, 0, 0, 10),
};
var progressBar = new ProgressBar((int)(150 * GuiWidget.DeviceScale), (int)(15 * GuiWidget.DeviceScale))
{
FillColor = theme.PrimaryAccentColor,
BorderColor = theme.TextColor,
BackgroundColor = Color.White,
VAnchor = VAnchor.Center,
};
var progressBarText = new TextWidget("", pointSize: 10, textColor: theme.TextColor)
{
AutoExpandBoundsToText = true,
Margin = new BorderDouble(5, 0, 0, 0),
VAnchor = VAnchor.Center,
};
holder.AddChild(progressBar);
holder.AddChild(progressBarText);
page.ContentRow.AddChild(holder);
if (extruderCount > 1)
{
// reset the extruder that was active
printer.Connection.QueueLine($"T{extruderIndex}");
}
// reset the extrusion amount so this is easier to debug
printer.Connection.QueueLine("G92 E0");
// Allow extrusion at any temperature. S0 only works on Marlin S1 works on repetier and marlin
printer.Connection.QueueLine("M302 S1");
// send a dwell to empty out the current move commands
printer.Connection.QueueLine("G4 P1");
// put in a second one to use as a signal for the first being processed
printer.Connection.QueueLine("G4 P1");
// start heating up the extruder
if (extruderIndex == 0)
{
printer.Connection.SetTargetHotendTemperature(0, printer.Settings.GetValue <double>(SettingsKey.temperature));
}
else
{
printer.Connection.SetTargetHotendTemperature(extruderIndex, printer.Settings.GetValue <double>(SettingsKey.temperature + extruderIndex.ToString()));
}
var loadingSpeedMmPerS = printer.Settings.GetValue <double>(SettingsKey.load_filament_speed);
var loadLengthMm = Math.Max(1, printer.Settings.GetValue <double>(SettingsKey.unload_filament_length));
var remainingLengthMm = loadLengthMm;
var maxSingleExtrudeLength = 20;
Stopwatch runningTime = null;
var expectedTimeS = loadLengthMm / loadingSpeedMmPerS;
// push some out first
var currentE = printer.Connection.CurrentExtruderDestination;
printer.Connection.QueueLine("G1 E{0:0.###} F600".FormatWith(currentE + 15));
runningGCodeCommands = UiThread.SetInterval(() =>
{
if (printer.Connection.NumQueuedCommands == 0)
{
if (runningTime == null)
{
runningTime = Stopwatch.StartNew();
}
if (progressBar.RatioComplete < 1 ||
remainingLengthMm >= .001)
{
var thisExtrude = Math.Min(remainingLengthMm, maxSingleExtrudeLength);
currentE = printer.Connection.CurrentExtruderDestination;
printer.Connection.QueueLine("G1 E{0:0.###} F{1}".FormatWith(currentE - thisExtrude, loadingSpeedMmPerS * 60));
// make sure we wait for this command to finish so we can cancel the unload at any time without delay
printer.Connection.QueueLine("G4 P1");
remainingLengthMm -= thisExtrude;
var elapsedSeconds = runningTime.Elapsed.TotalSeconds;
progressBar.RatioComplete = Math.Min(1, elapsedSeconds / expectedTimeS);
progressBarText.Text = $"Unloading Filament: {Math.Max(0, expectedTimeS - elapsedSeconds):0}";
}
}
if (progressBar.RatioComplete == 1 &&
remainingLengthMm <= .001)
{
UiThread.ClearInterval(runningGCodeCommands);
page.NextButton.InvokeClick();
}
},
.1);
},
PageClose = () =>
{
UiThread.ClearInterval(runningGCodeCommands);
}
};
unloadingFilamentPage.Closed += (s, e) =>
{
UiThread.ClearInterval(runningGCodeCommands);
if (extruderCount > 1)
{
// reset the extruder that was active
printer.Connection.QueueLine($"T{extruderPriorToUnload}");
}
printer.Connection.QueueLine("G92 E0");
};
yield return(unloadingFilamentPage);
}
// put up a success message
yield return(new DoneUnloadingPage(this, extruderIndex));
}
private IEnumerator <WizardPage> GetPages()
{
var extruderCount = printer.Settings.GetValue <int>(SettingsKey.extruder_count);
var levelingStrings = new LevelingStrings();
var instructions = "Please select the material you want to load.".Localize();
if (extruderCount > 1)
{
instructions = "Please select the material you want to load into extruder {0}.".Localize().FormatWith(extruderIndex + 1);
}
// select the material
yield return(new SelectMaterialPage(this, "Load Material".Localize(), instructions, "Select".Localize(), extruderIndex, true, showAlreadyLoadedButton)
{
WindowTitle = WindowTitle
});
var theme = ApplicationController.Instance.Theme;
// show the trim filament message
{
var trimFilamentPage = new WizardPage(this, "Trim Filament".Localize(), "")
{
PageLoad = (page) =>
{
// start heating up the extruder
printer.Connection.SetTargetHotendTemperature(extruderIndex, printer.Settings.GetValue <double>(SettingsKey.temperature));
var markdownText = printer.Settings.GetValue(SettingsKey.trim_filament_markdown);
var markdownWidget = new MarkdownWidget(theme);
markdownWidget.Markdown = markdownText = markdownText.Replace("\\n", "\n");
page.ContentRow.AddChild(markdownWidget);
}
};
yield return(trimFilamentPage);
}
if (extruderCount > 1)
{
// reset the extruder that was active
printer.Connection.QueueLine($"T{extruderIndex}");
}
// reset the extrusion amount so this is easier to debug
printer.Connection.QueueLine("G92 E0");
// show the insert filament page
{
RunningInterval runningGCodeCommands = null;
var insertFilamentPage = new WizardPage(this, "Insert Filament".Localize(), "")
{
PageLoad = (page) =>
{
var markdownText = printer.Settings.GetValue(SettingsKey.insert_filament_markdown2);
if (extruderIndex == 1)
{
markdownText = printer.Settings.GetValue(SettingsKey.insert_filament_1_markdown);
}
var markdownWidget = new MarkdownWidget(theme);
markdownWidget.Markdown = markdownText = markdownText.Replace("\\n", "\n");
page.ContentRow.AddChild(markdownWidget);
// turn off the fan
printer.Connection.FanSpeed0To255 = 0;
// Allow extrusion at any temperature. S0 only works on Marlin S1 works on repetier and marlin
printer.Connection.QueueLine("M302 S1");
int maxSecondsToStartLoading = 300;
var runningTime = Stopwatch.StartNew();
runningGCodeCommands = UiThread.SetInterval(() =>
{
if (printer.Connection.NumQueuedCommands == 0)
{
printer.Connection.MoveRelative(PrinterCommunication.PrinterConnection.Axis.E, 1, 80);
// send a dwell to empty out the current move commands
printer.Connection.QueueLine("G4 P1");
if (runningTime.ElapsedMilliseconds > maxSecondsToStartLoading * 1000)
{
UiThread.ClearInterval(runningGCodeCommands);
}
}
},
.1);
},
PageClose = () =>
{
if (runningGCodeCommands != null)
{
UiThread.ClearInterval(runningGCodeCommands);
}
}
};
insertFilamentPage.Closed += (s, e) =>
{
if (runningGCodeCommands != null)
{
UiThread.ClearInterval(runningGCodeCommands);
}
};
yield return(insertFilamentPage);
}
// show the loading filament progress bar
{
RunningInterval runningGCodeCommands = null;
var loadingFilamentPage = new WizardPage(this, "Loading Filament".Localize(), "")
{
PageLoad = (page) =>
{
page.NextButton.Enabled = false;
// add the progress bar
var holder = new FlowLayoutWidget()
{
Margin = new BorderDouble(3, 0, 0, 10),
};
var progressBar = new ProgressBar((int)(150 * GuiWidget.DeviceScale), (int)(15 * GuiWidget.DeviceScale))
{
FillColor = theme.PrimaryAccentColor,
BorderColor = theme.TextColor,
BackgroundColor = Color.White,
VAnchor = VAnchor.Center,
};
var progressBarText = new TextWidget("", pointSize: 10, textColor: theme.TextColor)
{
AutoExpandBoundsToText = true,
Margin = new BorderDouble(5, 0, 0, 0),
VAnchor = VAnchor.Center,
};
holder.AddChild(progressBar);
holder.AddChild(progressBarText);
page.ContentRow.AddChild(holder);
// Allow extrusion at any temperature. S0 only works on Marlin S1 works on repetier and marlin
printer.Connection.QueueLine("M302 S1");
// send a dwell to empty out the current move commands
printer.Connection.QueueLine("G4 P1");
// put in a second one to use as a signal for the first being processed
printer.Connection.QueueLine("G4 P1");
// start heating up the extruder
printer.Connection.SetTargetHotendTemperature(extruderIndex, printer.Settings.GetValue <double>(SettingsKey.temperature));
var loadingSpeedMmPerS = printer.Settings.GetValue <double>(SettingsKey.load_filament_speed);
var loadLengthMm = Math.Max(1, printer.Settings.GetValue <double>(SettingsKey.load_filament_length));
var remainingLengthMm = loadLengthMm;
var maxSingleExtrudeLength = 20;
Stopwatch runningTime = null;
var expectedTimeS = loadLengthMm / loadingSpeedMmPerS;
runningGCodeCommands = UiThread.SetInterval(() =>
{
if (printer.Connection.NumQueuedCommands == 0)
{
if (runningTime == null)
{
runningTime = Stopwatch.StartNew();
}
if (progressBar.RatioComplete < 1 ||
remainingLengthMm >= .001)
{
var thisExtrude = Math.Min(remainingLengthMm, maxSingleExtrudeLength);
var currentE = printer.Connection.CurrentExtruderDestination;
printer.Connection.QueueLine("G1 E{0:0.###} F{1}".FormatWith(currentE + thisExtrude, loadingSpeedMmPerS * 60));
// make sure we wait for this command to finish so we can cancel the unload at any time without delay
printer.Connection.QueueLine("G4 P1");
remainingLengthMm -= thisExtrude;
var elapsedSeconds = runningTime.Elapsed.TotalSeconds;
progressBar.RatioComplete = Math.Min(1, elapsedSeconds / expectedTimeS);
progressBarText.Text = $"Loading Filament: {Math.Max(0, expectedTimeS - elapsedSeconds):0}";
}
}
if (progressBar.RatioComplete == 1 &&
remainingLengthMm <= .001)
{
UiThread.ClearInterval(runningGCodeCommands);
page.NextButton.InvokeClick();
}
},
.1);
},
PageClose = () =>
{
UiThread.ClearInterval(runningGCodeCommands);
}
};
loadingFilamentPage.Closed += (s, e) =>
{
UiThread.ClearInterval(runningGCodeCommands);
};
yield return(loadingFilamentPage);
}
// wait for extruder to heat
{
var targetHotendTemp = printer.Settings.Helpers.ExtruderTargetTemperature(extruderIndex);
var temps = new double[4];
temps[extruderIndex] = targetHotendTemp;
yield return(new WaitForTempPage(
this,
"Waiting For Printer To Heat".Localize(),
"Waiting for the hotend to heat to ".Localize() + targetHotendTemp + "°C.\n"
+ "This will ensure that filament is able to flow through the nozzle.".Localize() + "\n"
+ "\n"
+ "Warning! The tip of the nozzle will be HOT!".Localize() + "\n"
+ "Avoid contact with your skin.".Localize(),
0,
temps));
}
// extrude slowly so that we can prime the extruder
{
RunningInterval runningGCodeCommands = null;
var runningCleanPage = new WizardPage(this, "Wait For Running Clean".Localize(), "")
{
PageLoad = (page) =>
{
var markdownText = printer.Settings.GetValue(SettingsKey.running_clean_markdown2);
if (extruderIndex == 1)
{
markdownText = printer.Settings.GetValue(SettingsKey.running_clean_1_markdown);
}
var markdownWidget = new MarkdownWidget(theme);
markdownWidget.Markdown = markdownText = markdownText.Replace("\\n", "\n");
page.ContentRow.AddChild(markdownWidget);
var runningTime = Stopwatch.StartNew();
runningGCodeCommands = UiThread.SetInterval(() =>
{
if (printer.Connection.NumQueuedCommands == 0)
{
printer.Connection.MoveRelative(PrinterCommunication.PrinterConnection.Axis.E, 2, 140);
// make sure we wait for this command to finish so we can cancel the unload at any time without delay
printer.Connection.QueueLine("G4 P1");
int secondsToRun = 90;
if (runningTime.ElapsedMilliseconds > secondsToRun * 1000)
{
UiThread.ClearInterval(runningGCodeCommands);
}
}
},
.1);
},
PageClose = () =>
{
UiThread.ClearInterval(runningGCodeCommands);
}
};
runningCleanPage.Closed += (s, e) =>
{
switch (extruderIndex)
{
case 0:
printer.Settings.SetValue(SettingsKey.filament_has_been_loaded, "1");
break;
case 1:
printer.Settings.SetValue(SettingsKey.filament_1_has_been_loaded, "1");
break;
}
printer.Settings.SetValue(SettingsKey.filament_has_been_loaded, "1");
};
yield return(runningCleanPage);
}
// put up a success message
yield return(new DoneLoadingPage(this, extruderIndex));
}
public RunningMacroPage(PrinterConfig printer, MacroCommandData macroData, ThemeConfig theme)
: base("Cancel")
{
this.printer = printer;
this.WindowTitle = "Running Macro".Localize();
this.HeaderText = macroData.title;
if (macroData.showMaterialSelector)
{
contentRow.AddChild(new PresetSelectorWidget(printer, "Material".Localize(), Color.Transparent, NamedSettingsLayers.Material, theme)
{
BackgroundColor = Color.Transparent,
Margin = new BorderDouble(0, 0, 0, 15)
});
}
printer.Connection.LineSent.RegisterEvent(LookForTempRequest, ref unregisterEvents);
if (macroData.waitOk | macroData.expireTime > 0)
{
var okButton = theme.CreateDialogButton("Continue".Localize());
okButton.Click += (s, e) =>
{
printer.Connection.MacroContinue();
};
this.AddPageAction(okButton);
}
if (macroData.image != null)
{
var imageWidget = new ImageWidget(macroData.image)
{
HAnchor = HAnchor.Center,
Margin = new BorderDouble(5, 15),
};
contentRow.AddChild(imageWidget);
}
var holder = new FlowLayoutWidget();
progressBar = new ProgressBar((int)(150 * GuiWidget.DeviceScale), (int)(15 * GuiWidget.DeviceScale))
{
FillColor = ActiveTheme.Instance.PrimaryAccentColor,
BorderColor = ActiveTheme.Instance.PrimaryTextColor,
BackgroundColor = Color.White,
Margin = new BorderDouble(3, 0, 0, 10),
};
progressBarText = new TextWidget("", pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor)
{
AutoExpandBoundsToText = true,
Margin = new BorderDouble(5, 0, 0, 0),
};
holder.AddChild(progressBar);
holder.AddChild(progressBarText);
contentRow.AddChild(holder);
progressBar.Visible = false;
if (macroData.countDown > 0)
{
timeToWaitMs = (long)(macroData.countDown * 1000);
startTimeMs = UiThread.CurrentTimerMs;
runningInterval = UiThread.SetInterval(CountDownTime, .2);
}
}
private GuiWidget GetPopupContent(ThemeConfig theme)
{
var widget = new IgnoredPopupWidget()
{
Width = 300,
HAnchor = HAnchor.Absolute,
VAnchor = VAnchor.Fit,
BackgroundColor = theme.Colors.PrimaryBackgroundColor,
Padding = new BorderDouble(12, 0)
};
var container = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit | VAnchor.Top,
};
widget.AddChild(container);
GuiWidget hotendRow;
container.AddChild(hotendRow = new SettingsItem(
"Heated Bed".Localize(),
theme,
new SettingsItem.ToggleSwitchConfig()
{
Checked = false,
ToggleAction = (itemChecked) =>
{
var goalTemp = itemChecked ? printer.Settings.GetValue <double>(SettingsKey.bed_temperature) : 0;
if (itemChecked)
{
SetTargetTemperature(goalTemp);
}
else
{
SetTargetTemperature(0);
}
}
},
enforceGutter: false));
var toggleWidget = hotendRow.Children.Where(o => o is ICheckbox).FirstOrDefault();
toggleWidget.Name = "Toggle Heater";
heatToggle = toggleWidget as ICheckbox;
int tabIndex = 0;
var settingsContext = new SettingsContext(printer, null, NamedSettingsLayers.All);
var settingsData = SettingsOrganizer.Instance.GetSettingsData(SettingsKey.bed_temperature);
var temperatureRow = SliceSettingsTabView.CreateItemRow(settingsData, settingsContext, printer, theme, ref tabIndex);
SliceSettingsRow.AddBordersToEditFields(temperatureRow);
container.AddChild(temperatureRow);
alwaysEnabled.Add(hotendRow);
// add in the temp graph
var graph = new DataViewGraph()
{
DynamiclyScaleRange = false,
MinValue = 0,
ShowGoal = true,
GoalColor = ActiveTheme.Instance.PrimaryAccentColor,
GoalValue = printer.Settings.GetValue <double>(SettingsKey.bed_temperature),
MaxValue = 150, // could come from some profile value in the future
Width = widget.Width - 20,
Height = 35, // this works better if it is a common multiple of the Width
Margin = new BorderDouble(0, 5, 0, 0),
};
var runningInterval = UiThread.SetInterval(() =>
{
graph.AddData(this.ActualTemperature);
}, 1);
this.Closed += (s, e) => runningInterval.Continue = false;
var valueField = temperatureRow.Descendants <MHNumberEdit>().FirstOrDefault();
var settingsRow = temperatureRow.DescendantsAndSelf <SliceSettingsRow>().FirstOrDefault();
ActiveSliceSettings.SettingChanged.RegisterEvent((s, e) =>
{
if (e is StringEventArgs stringEvent)
{
var temp = printer.Settings.GetValue <double>(SettingsKey.bed_temperature);
valueField.Value = temp;
graph.GoalValue = temp;
settingsRow.UpdateStyle();
if (stringEvent.Data == SettingsKey.bed_temperature &&
heatToggle.Checked)
{
SetTargetTemperature(temp);
}
}
;
}, ref unregisterEvents);
container.AddChild(graph);
return(widget);
}
private GuiWidget GetPopupContent(ThemeConfig menuTheme)
{
var widget = new IgnoredPopupWidget()
{
Width = 300,
HAnchor = HAnchor.Absolute,
VAnchor = VAnchor.Fit,
Padding = new BorderDouble(12, 0),
BackgroundColor = menuTheme.BackgroundColor
};
var container = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit | VAnchor.Top,
};
widget.AddChild(container);
GuiWidget hotendRow;
container.AddChild(hotendRow = new SettingsItem(
"Heated Bed".Localize(),
menuTheme,
new SettingsItem.ToggleSwitchConfig()
{
Checked = false,
ToggleAction = (itemChecked) =>
{
var goalTemp = itemChecked ? printer.Settings.GetValue <double>(SettingsKey.bed_temperature) : 0;
if (itemChecked)
{
SetTargetTemperature(goalTemp);
}
else
{
SetTargetTemperature(0);
}
}
},
enforceGutter: false));
var toggleWidget = hotendRow.Children.Where(o => o is ICheckbox).FirstOrDefault();
toggleWidget.Name = "Toggle Heater";
heatToggle = toggleWidget as ICheckbox;
int tabIndex = 0;
var settingsContext = new SettingsContext(printer, null, NamedSettingsLayers.All);
var settingsData = PrinterSettings.SettingsData[SettingsKey.bed_temperature];
var temperatureRow = SliceSettingsTabView.CreateItemRow(settingsData, settingsContext, printer, menuTheme, ref tabIndex, allUiFields);
container.AddChild(temperatureRow);
// Add the temperature row to the always enabled list ensuring the field can be set when disconnected
alwaysEnabled.Add(temperatureRow);
// add in the temp graph
var graph = new DataViewGraph()
{
DynamicallyScaleRange = false,
MinValue = 0,
ShowGoal = true,
GoalColor = menuTheme.PrimaryAccentColor,
GoalValue = printer.Settings.GetValue <double>(SettingsKey.bed_temperature),
MaxValue = 150, // could come from some profile value in the future
Width = widget.Width - 20,
Height = 35, // this works better if it is a common multiple of the Width
Margin = new BorderDouble(0, 5, 0, 0),
};
runningInterval = UiThread.SetInterval(() =>
{
graph.AddData(this.ActualTemperature);
}, 1);
var settingsRow = temperatureRow.DescendantsAndSelf <SliceSettingsRow>().FirstOrDefault();
void Printer_SettingChanged(object s, StringEventArgs stringEvent)
{
if (stringEvent != null)
{
string settingsKey = stringEvent.Data;
if (this.allUiFields.TryGetValue(settingsKey, out UIField uifield))
{
string currentValue = settingsContext.GetValue(settingsKey);
if (uifield.Value != currentValue)
{
uifield.SetValue(
currentValue,
userInitiated: false);
}
}
if (stringEvent.Data == SettingsKey.bed_temperature)
{
var temp = printer.Settings.GetValue <double>(SettingsKey.bed_temperature);
graph.GoalValue = temp;
// TODO: Why is this only when enabled? How does it get set to
if (heatToggle.Checked)
{
// TODO: Why is a UI widget who is listening to model events driving this behavior? What when it's not loaded?
SetTargetTemperature(temp);
}
settingsRow.UpdateStyle();
}
}
}
printer.Settings.SettingChanged += Printer_SettingChanged;
printer.Disposed += (s, e) => printer.Settings.SettingChanged -= Printer_SettingChanged;
container.AddChild(graph);
return(widget);
}
public RunningTaskRow(string title, RunningTaskDetails taskDetails, ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
this.taskDetails = taskDetails;
this.theme = theme;
this.MinimumSize = new Vector2(100 * GuiWidget.DeviceScale, 20 * GuiWidget.DeviceScale);
var detailsPanel = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
};
var rowContainer = new GuiWidget()
{
VAnchor = VAnchor.Fit,
HAnchor = HAnchor.Stretch,
};
this.AddChild(rowContainer);
var topRow = new FlowLayoutWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
Padding = 0,
};
rowContainer.AddChild(topRow);
progressBar = new ProgressBar()
{
HAnchor = HAnchor.Stretch,
Height = 2 * GuiWidget.DeviceScale,
VAnchor = VAnchor.Absolute | VAnchor.Bottom,
FillColor = theme.PrimaryAccentColor,
BorderColor = Color.Transparent,
Margin = new BorderDouble(32, 7, theme.ButtonHeight * 2 + 14, 0),
Visible = !taskDetails.IsExpanded
};
rowContainer.AddChild(progressBar);
expandButton = new ExpandCheckboxButton(!string.IsNullOrWhiteSpace(title) ? title : taskDetails.Title, theme, 10)
{
VAnchor = VAnchor.Center | VAnchor.Fit,
HAnchor = HAnchor.Stretch,
Checked = false,
Padding = 0,
AlwaysShowArrow = true
};
expandButton.CheckedStateChanged += (s, e) =>
{
taskDetails.IsExpanded = expandButton.Checked;
SetExpansionMode(theme, detailsPanel, expandButton.Checked);
};
topRow.AddChild(expandButton);
GuiWidget resumeButton = null;
GuiWidget pauseButton = CreateIconOrTextButton("fa-pause_12.png",
taskDetails.Options?.PauseText,
taskDetails.Options?.PauseAction,
taskDetails.Options?.PauseToolTip ?? "Pause".Localize(),
"",
theme,
0);
if (taskDetails.Options?.IsPaused != null)
{
RunningInterval runningInterval = null;
runningInterval = UiThread.SetInterval(() =>
{
if (taskDetails.Options.IsPaused())
{
pauseButton.Visible = false;
resumeButton.Visible = true;
}
else
{
pauseButton.Visible = true;
resumeButton.Visible = false;
}
if (this.HasBeenClosed)
{
UiThread.ClearInterval(runningInterval);
}
}, .2);
}
pauseButton.Click += (s, e) =>
{
taskDetails.Options?.PauseAction();
pauseButton.Visible = false;
resumeButton.Visible = true;
};
topRow.AddChild(pauseButton);
resumeButton = CreateIconOrTextButton("fa-play_12.png",
taskDetails.Options?.ResumeText,
taskDetails.Options?.ResumeAction,
taskDetails.Options?.ResumeToolTip ?? "Resume".Localize(),
"Resume Task Button",
theme,
0);
// start with it hidden
resumeButton.Visible = false;
resumeButton.Click += (s, e) =>
{
taskDetails.Options?.ResumeAction();
pauseButton.Visible = true;
resumeButton.Visible = false;
};
topRow.AddChild(resumeButton);
var stopButton = CreateIconOrTextButton("fa-stop_12.png",
taskDetails.Options?.StopText,
taskDetails.Options?.StopAction,
taskDetails.Options?.StopToolTip ?? "Cancel".Localize(),
"Stop Task Button",
theme,
5);
stopButton.Enabled = true;
stopButton.Click += (s, e) =>
{
var stopAction = taskDetails.Options?.StopAction;
if (stopAction == null)
{
taskDetails.CancelTask();
}
else
{
stopAction.Invoke(() =>
{
stopButton.Enabled = true;
});
}
stopButton.Enabled = false;
};
topRow.AddChild(stopButton);
this.AddChild(detailsPanel);
// Add rich progress controls
if (taskDetails.Options?.RichProgressWidget?.Invoke() is GuiWidget guiWidget)
{
detailsPanel.AddChild(guiWidget);
}
else
{
expandButton.Expandable = false;
}
if (taskDetails.Options?.ReadOnlyReporting == true)
{
stopButton.Visible = false;
pauseButton.Visible = false;
resumeButton.Visible = false;
// Ensure the top row is as big as it would be with buttons
topRow.MinimumSize = new Vector2(0, resumeButton.Height);
}
SetExpansionMode(theme, detailsPanel, taskDetails.IsExpanded);
taskDetails.ProgressChanged += TaskDetails_ProgressChanged;
}
public static GuiWidget PrintProgressWidget(PrinterConfig printer, ThemeConfig theme)
{
var bodyRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Top | VAnchor.Fit,
// BackgroundColor = new Color(theme.Colors.PrimaryBackgroundColor, 128),
MinimumSize = new Vector2(275, 140),
};
// Progress section
var expandingContainer = new HorizontalSpacer()
{
VAnchor = VAnchor.Fit | VAnchor.Center
};
bodyRow.AddChild(expandingContainer);
var topToBottom = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
VAnchor = VAnchor.Center | VAnchor.Fit,
HAnchor = HAnchor.Stretch,
};
expandingContainer.AddChild(topToBottom);
var progressRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit
};
topToBottom.AddChild(progressRow);
var progressDial = new ProgressDial(theme)
{
HAnchor = HAnchor.Center,
VAnchor = VAnchor.Center,
Height = 200 * DeviceScale,
Width = 200 * DeviceScale,
Name = "Print Progress Dial"
};
progressRow.AddChild(progressDial);
// create a set of controls to do baby stepping on the first layer
var babySteppingControls = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Right,
VAnchor = VAnchor.Center | VAnchor.Fit,
};
babySteppingControls.Width = 80 * GuiWidget.DeviceScale;
progressRow.AddChild(babySteppingControls);
// add in the move up button
var babyStepAmount = .02;
var upButton = babySteppingControls.AddChild(new IconButton(StaticData.Instance.LoadIcon("Up Arrow.png", 32, 32).SetToColor(theme.TextColor), theme)
{
HAnchor = HAnchor.Center,
VAnchor = VAnchor.Absolute,
Margin = 0,
BackgroundRadius = theme.ButtonRadius,
ToolTipText = "Raise extruder".Localize() + "\n\n*" + "First layer only".Localize() + "*",
});
upButton.Click += (s, e) =>
{
printer.Settings.ForTools <double>(SettingsKey.baby_step_z_offset, (key, value, i) =>
{
if (printer.Connection.ActiveExtruderIndex == i)
{
var currentZ = value + babyStepAmount;
printer.Settings.SetValue(key, currentZ.ToString("0.##"));
}
});
};
// add in the current position display
var zTuning = babySteppingControls.AddChild(new ZTuningWidget(printer, theme, false)
{
HAnchor = HAnchor.Center | HAnchor.Fit,
VAnchor = VAnchor.Fit,
Margin = new BorderDouble(0, 3, 0, 0),
Padding = 0,
});
babySteppingControls.AddChild(new TextWidget("Z Offset".Localize(), pointSize: 8)
{
TextColor = theme.TextColor,
Margin = new BorderDouble(0, 0, 0, 3),
AutoExpandBoundsToText = true,
HAnchor = HAnchor.Center,
});
// add in the move down button
var downButton = babySteppingControls.AddChild(new IconButton(StaticData.Instance.LoadIcon("Down Arrow.png", 32, 32).SetToColor(theme.TextColor), theme)
{
HAnchor = HAnchor.Center,
VAnchor = VAnchor.Absolute,
Margin = 0,
BackgroundRadius = new RadiusCorners(theme.ButtonRadius, theme.ButtonRadius, 0, 0),
ToolTipText = "Lower extruder".Localize() + "\n\n*" + "First layer only".Localize() + "*",
});
downButton.Click += (s, e) =>
{
printer.Settings.ForTools <double>(SettingsKey.baby_step_z_offset, (key, value, i) =>
{
if (printer.Connection.ActiveExtruderIndex == i)
{
var currentZ = value - babyStepAmount;
printer.Settings.SetValue(key, currentZ.ToString("0.##"));
}
});
};
// build the bottom row to hold re-slice
var bottomRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit
};
topToBottom.AddChild(bottomRow);
var resliceMessageRow = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
Visible = false
};
topToBottom.AddChild(resliceMessageRow);
var timeContainer = new FlowLayoutWidget()
{
HAnchor = HAnchor.Center | HAnchor.Fit,
Margin = 3
};
bottomRow.AddChild(timeContainer);
// we can only reslice on 64 bit, because in 64 bit we always have the gcode loaded
if (IntPtr.Size == 8 || ApplicationController.Instance.Allow32BitReSlice)
{
var resliceButton = new TextButton("Re-Slice", theme)
{
VAnchor = VAnchor.Center,
HAnchor = HAnchor.Right,
Margin = new BorderDouble(0, 0, 7, 0),
Name = "Re-Slice Button",
ToolTipText = "Apply changes to this print".Localize() + "\n\n*" + "Plating and settings changes can be applied".Localize() + "*"
};
theme.MakeRoundedButton(resliceButton);
bool activelySlicing = false;
resliceButton.Click += (s, e) =>
{
resliceButton.Enabled = false;
UiThread.RunOnIdle(async() =>
{
bool doSlicing = !activelySlicing && printer.Bed.EditContext.SourceItem != null;
if (doSlicing)
{
var errors = printer.ValidateSettings();
if (errors.Any(err => err.ErrorLevel == ValidationErrorLevel.Error))
{
doSlicing = false;
ApplicationController.Instance.ShowValidationErrors("Slicing Error".Localize(), errors);
}
}
if (doSlicing)
{
activelySlicing = true;
if (bottomRow.Name == null)
{
bottomRow.Name = await printer.Bed.EditContext.GCodeFilePath(printer);
}
await ApplicationController.Instance.Tasks.Execute("Saving".Localize(), printer, printer.Bed.SaveChanges);
// start up a new slice on a background thread
await ApplicationController.Instance.SliceItemLoadOutput(
printer,
printer.Bed.Scene,
await printer.Bed.EditContext.GCodeFilePath(printer));
// Switch to the 3D layer view if on Model view
if (printer.ViewState.ViewMode == PartViewMode.Model)
{
printer.ViewState.ViewMode = PartViewMode.Layers3D;
}
resliceMessageRow.Visible = true;
resliceMessageRow.VAnchor = VAnchor.Absolute;
resliceMessageRow.VAnchor = VAnchor.Fit;
}
else
{
resliceButton.Enabled = true;
}
});
};
bottomRow.AddChild(resliceButton);
// setup the message row
{
// when it is done queue it to the change to gcode stream
var switchMessage = "Switch to new G-Code?\n\nBefore you switch, check that you are seeing the changes you expect.".Localize();
resliceMessageRow.AddChild(new WrappedTextWidget(switchMessage, theme.DefaultFontSize, textColor: theme.TextColor)
{
Margin = new BorderDouble(7, 3)
});
var switchButtonRow = new FlowLayoutWidget(FlowDirection.RightToLeft)
{
HAnchor = HAnchor.Stretch
};
resliceMessageRow.AddChild(switchButtonRow);
var switchButton = new TextButton("Switch", theme)
{
VAnchor = VAnchor.Center,
Margin = new BorderDouble(5),
Name = "Switch Button"
};
theme.MakeRoundedButton(switchButton);
switchButtonRow.AddChild(switchButton);
switchButton.Click += async(s, e) =>
{
if (printer.Connection != null &&
(printer.Connection.Printing || printer.Connection.Paused))
{
printer.Connection.SwitchToGCode(await printer.Bed.EditContext.GCodeFilePath(printer));
bottomRow.Name = await printer.Bed.EditContext.GCodeFilePath(printer);
}
activelySlicing = false;
resliceButton.Enabled = true;
resliceMessageRow.Visible = false;
};
var cancelButton = new TextButton("Cancel", theme)
{
VAnchor = VAnchor.Center,
Margin = new BorderDouble(0, 5),
Name = "Cancel Re-Slice Button"
};
theme.MakeRoundedButton(cancelButton);
switchButtonRow.AddChild(cancelButton);
cancelButton.Click += async(s, e) =>
{
await ApplicationController.Instance.SliceItemLoadOutput(
printer,
printer.Bed.Scene,
bottomRow.Name);
activelySlicing = false;
resliceButton.Enabled = true;
resliceMessageRow.Visible = false;
};
}
}
timeContainer.AddChild(new ImageWidget(StaticData.Instance.LoadIcon("fa-clock_24.png", 24, 24).SetToColor(theme.TextColor))
{
VAnchor = VAnchor.Center
});
var timeStack = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
Margin = new BorderDouble(10, 0, 0, 0),
Padding = new BorderDouble(5, 0, 0, 0),
VAnchor = VAnchor.Center | VAnchor.Fit
};
timeContainer.AddChild(timeStack);
var timePrinted = new TextWidget("", pointSize: 16, textColor: theme.TextColor)
{
AutoExpandBoundsToText = true,
HAnchor = HAnchor.Center,
};
timeStack.AddChild(timePrinted);
var timeToEnd = new TextWidget("", pointSize: 9, textColor: theme.TextColor)
{
AutoExpandBoundsToText = true,
HAnchor = HAnchor.Center,
};
timeStack.AddChild(timeToEnd);
var runningInterval = UiThread.SetInterval(() =>
{
int totalSecondsPrinted = printer.Connection.SecondsPrinted;
int hoursPrinted = totalSecondsPrinted / (60 * 60);
int minutesPrinted = totalSecondsPrinted / 60 - hoursPrinted * 60;
var secondsPrinted = totalSecondsPrinted % 60;
// TODO: Consider if the consistency of a common time format would look and feel better than changing formats based on elapsed duration
timePrinted.Text = GetFormatedTime(hoursPrinted, minutesPrinted, secondsPrinted);
int totalSecondsToEnd = printer.Connection.SecondsToEnd;
int hoursToEnd = totalSecondsToEnd / (60 * 60);
int minutesToEnd = totalSecondsToEnd / 60 - hoursToEnd * 60;
var secondsToEnd = totalSecondsToEnd % 60;
timeToEnd.Text = GetFormatedTime(hoursToEnd, minutesToEnd, secondsToEnd);
progressDial.LayerIndex = printer.Connection.CurrentlyPrintingLayer;
if (progressDial.LayerIndex > 0)
{
babySteppingControls.Visible = false;
}
progressDial.LayerCompletedRatio = printer.Connection.RatioIntoCurrentLayerSeconds;
progressDial.CompletedRatio = printer.Connection.PercentComplete / 100;
switch (printer.Connection.CommunicationState)
{
case CommunicationStates.PreparingToPrint:
case CommunicationStates.Printing:
case CommunicationStates.Paused:
bodyRow.Visible = true;
break;
default:
bodyRow.Visible = false;
break;
}
}, 1);
bodyRow.Closed += (s, e) => UiThread.ClearInterval(runningInterval);
bodyRow.Visible = false;
return(bodyRow);
}
protected override IEnumerator <PrinterSetupWizardPage> GetWizardSteps()
{
var levelingStrings = new LevelingStrings(printer.Settings);
var title = "Select Material".Localize();
var instructions = "Please select the material you will be printing with.".Localize();
if (onlyLoad)
{
title = "Load Material".Localize();
instructions = "Please select the material you want to load.".Localize();
}
// select the material
yield return(new SelectMaterialPage(this, title, instructions, onlyLoad ? "Load".Localize() : "Select".Localize(), onlyLoad));
var theme = ApplicationController.Instance.Theme;
// show the trim filament message
{
PrinterSetupWizardPage trimFilamentPage = null;
trimFilamentPage = new PrinterSetupWizardPage(
this,
"Trim Filament".Localize(),
"")
{
BecomingActive = () =>
{
// start heating up the extruder
printer.Connection.SetTargetHotendTemperature(0, printer.Settings.GetValue <double>(SettingsKey.temperature));
var markdownText = printer.Settings.GetValue(SettingsKey.trim_filament_markdown);
var markdownWidget = new MarkdownWidget(theme);
markdownWidget.Markdown = markdownText = markdownText.Replace("\\n", "\n");
trimFilamentPage.ContentRow.AddChild(markdownWidget);
}
};
yield return(trimFilamentPage);
}
// show the insert filament page
{
RunningInterval runningGCodeCommands = null;
PrinterSetupWizardPage insertFilamentPage = null;
insertFilamentPage = new PrinterSetupWizardPage(
this,
"Insert Filament".Localize(),
"")
{
BecomingActive = () =>
{
var markdownText = printer.Settings.GetValue(SettingsKey.insert_filament_markdown2);
var markdownWidget = new MarkdownWidget(theme);
markdownWidget.Markdown = markdownText = markdownText.Replace("\\n", "\n");
insertFilamentPage.ContentRow.AddChild(markdownWidget);
// turn off the fan
printer.Connection.FanSpeed0To255 = 0;
// Allow extrusion at any temperature. S0 only works on Marlin S1 works on repetier and marlin
printer.Connection.QueueLine("M302 S1");
var runningTime = Stopwatch.StartNew();
runningGCodeCommands = UiThread.SetInterval(() =>
{
if (printer.Connection.NumQueuedCommands == 0)
{
printer.Connection.MoveRelative(PrinterCommunication.PrinterConnection.Axis.E, .2, 80);
int secondsToRun = 300;
if (runningTime.ElapsedMilliseconds > secondsToRun * 1000)
{
UiThread.ClearInterval(runningGCodeCommands);
}
}
},
.1);
},
BecomingInactive = () =>
{
if (runningGCodeCommands != null)
{
UiThread.ClearInterval(runningGCodeCommands);
}
}
};
insertFilamentPage.Closed += (s, e) =>
{
if (runningGCodeCommands != null)
{
UiThread.ClearInterval(runningGCodeCommands);
}
};
yield return(insertFilamentPage);
}
// show the loading filament progress bar
{
RunningInterval runningGCodeCommands = null;
PrinterSetupWizardPage loadingFilamentPage = null;
loadingFilamentPage = new PrinterSetupWizardPage(
this,
"Loading Filament".Localize(),
"")
{
BecomingActive = () =>
{
loadingFilamentPage.NextButton.Enabled = false;
// add the progress bar
var holder = new FlowLayoutWidget()
{
Margin = new BorderDouble(3, 0, 0, 10),
};
var progressBar = new ProgressBar((int)(150 * GuiWidget.DeviceScale), (int)(15 * GuiWidget.DeviceScale))
{
FillColor = theme.PrimaryAccentColor,
BorderColor = theme.TextColor,
BackgroundColor = Color.White,
VAnchor = VAnchor.Center,
};
var progressBarText = new TextWidget("", pointSize: 10, textColor: theme.TextColor)
{
AutoExpandBoundsToText = true,
Margin = new BorderDouble(5, 0, 0, 0),
VAnchor = VAnchor.Center,
};
holder.AddChild(progressBar);
holder.AddChild(progressBarText);
loadingFilamentPage.ContentRow.AddChild(holder);
// Allow extrusion at any temperature. S0 only works on Marlin S1 works on repetier and marlin
printer.Connection.QueueLine("M302 S1");
// send a dwel to empty out the current move commands
printer.Connection.QueueLine("G4 P1");
// put in a second one to use as a signal for the first being processed
printer.Connection.QueueLine("G4 P1");
// start heating up the extruder
printer.Connection.SetTargetHotendTemperature(0, printer.Settings.GetValue <double>(SettingsKey.temperature));
var loadingSpeedMmPerS = printer.Settings.GetValue <double>(SettingsKey.load_filament_speed);
var loadLengthMm = Math.Max(1, printer.Settings.GetValue <double>(SettingsKey.load_filament_length));
var remainingLengthMm = loadLengthMm;
var maxSingleExtrudeLength = 20;
Stopwatch runningTime = null;
var expectedTimeS = loadLengthMm / loadingSpeedMmPerS;
runningGCodeCommands = UiThread.SetInterval(() =>
{
if (printer.Connection.NumQueuedCommands == 0)
{
if (runningTime == null)
{
runningTime = Stopwatch.StartNew();
}
if (progressBar.RatioComplete < 1)
{
var thisExtrude = Math.Min(remainingLengthMm, maxSingleExtrudeLength);
var currentE = printer.Connection.CurrentExtruderDestination;
printer.Connection.QueueLine("G1 E{0:0.###} F{1}".FormatWith(currentE + thisExtrude, loadingSpeedMmPerS * 60));
remainingLengthMm -= thisExtrude;
var elapsedSeconds = runningTime.Elapsed.TotalSeconds;
progressBar.RatioComplete = Math.Min(1, elapsedSeconds / expectedTimeS);
progressBarText.Text = $"Loading Filament: {Math.Max(0, expectedTimeS - elapsedSeconds):0}";
}
}
if (progressBar.RatioComplete == 1 &&
remainingLengthMm <= .001)
{
UiThread.ClearInterval(runningGCodeCommands);
loadingFilamentPage.NextButton.InvokeClick();
}
},
.1);
},
BecomingInactive = () =>
{
UiThread.ClearInterval(runningGCodeCommands);
}
};
loadingFilamentPage.Closed += (s, e) =>
{
UiThread.ClearInterval(runningGCodeCommands);
};
yield return(loadingFilamentPage);
}
// wait for extruder to heat
{
double targetHotendTemp = printer.Settings.Helpers.ExtruderTemperature(0);
yield return(new WaitForTempPage(
this,
"Waiting For Printer To Heat".Localize(),
"Waiting for the hotend to heat to ".Localize() + targetHotendTemp + "°C.\n"
+ "This will ensure that filament is able to flow through the nozzle.".Localize() + "\n"
+ "\n"
+ "Warning! The tip of the nozzle will be HOT!".Localize() + "\n"
+ "Avoid contact with your skin.".Localize(),
0,
targetHotendTemp));
}
// extrude slowly so that we can prime the extruder
{
RunningInterval runningGCodeCommands = null;
PrinterSetupWizardPage runningCleanPage = null;
runningCleanPage = new PrinterSetupWizardPage(
this,
"Wait For Running Clean".Localize(),
"")
{
BecomingActive = () =>
{
var markdownText = printer.Settings.GetValue(SettingsKey.running_clean_markdown2);
var markdownWidget = new MarkdownWidget(theme);
markdownWidget.Markdown = markdownText = markdownText.Replace("\\n", "\n");
runningCleanPage.ContentRow.AddChild(markdownWidget);
var runningTime = Stopwatch.StartNew();
runningGCodeCommands = UiThread.SetInterval(() =>
{
if (printer.Connection.NumQueuedCommands == 0)
{
printer.Connection.MoveRelative(PrinterCommunication.PrinterConnection.Axis.E, .35, 140);
int secondsToRun = 90;
if (runningTime.ElapsedMilliseconds > secondsToRun * 1000)
{
UiThread.ClearInterval(runningGCodeCommands);
}
}
},
.1);
},
BecomingInactive = () =>
{
UiThread.ClearInterval(runningGCodeCommands);
}
};
runningCleanPage.Closed += (s, e) =>
{
UiThread.ClearInterval(runningGCodeCommands);
printer.Settings.SetValue(SettingsKey.filament_has_been_loaded, "1");
};
yield return(runningCleanPage);
}
// put up a success message
PrinterSetupWizardPage finalPage = null;
finalPage = new PrinterSetupWizardPage(this, "Success".Localize(), "Success!\n\nYour filament should now be loaded".Localize())
{
BecomingActive = () =>
{
finalPage.ShowWizardFinished();
}
};
yield return(finalPage);
}
public static GuiWidget PrintProgressWidget(PrinterConfig printer, ThemeConfig theme)
{
var bodyRow = new GuiWidget()
{
HAnchor = HAnchor.Fit | HAnchor.Center,
VAnchor = VAnchor.Top | VAnchor.Fit,
//BackgroundColor = new Color(theme.Colors.PrimaryBackgroundColor, 128),
MinimumSize = new Vector2(275, 140),
Selectable = false
};
// Progress section
var expandingContainer = new HorizontalSpacer()
{
VAnchor = VAnchor.Fit | VAnchor.Center
};
bodyRow.AddChild(expandingContainer);
var progressContainer = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
Margin = new BorderDouble(50, 0),
VAnchor = VAnchor.Center | VAnchor.Fit,
HAnchor = HAnchor.Center | HAnchor.Fit,
};
expandingContainer.AddChild(progressContainer);
var progressDial = new ProgressDial()
{
HAnchor = HAnchor.Center,
Height = 200 * DeviceScale,
Width = 200 * DeviceScale
};
progressContainer.AddChild(progressDial);
var timeContainer = new FlowLayoutWidget()
{
HAnchor = HAnchor.Center | HAnchor.Fit,
Margin = 3
};
progressContainer.AddChild(timeContainer);
timeContainer.AddChild(new ImageWidget(AggContext.StaticData.LoadIcon("fa-clock_24.png", theme.InvertIcons))
{
VAnchor = VAnchor.Center
});
var timeWidget = new TextWidget("", pointSize: 22, textColor: theme.Colors.PrimaryTextColor)
{
AutoExpandBoundsToText = true,
Margin = new BorderDouble(10, 0, 0, 0),
VAnchor = VAnchor.Center,
};
timeContainer.AddChild(timeWidget);
var runningInterval = UiThread.SetInterval(
() =>
{
int secondsPrinted = printer.Connection.SecondsPrinted;
int hoursPrinted = (int)(secondsPrinted / (60 * 60));
int minutesPrinted = (secondsPrinted / 60 - hoursPrinted * 60);
secondsPrinted = secondsPrinted % 60;
// TODO: Consider if the consistency of a common time format would look and feel better than changing formats based on elapsed duration
timeWidget.Text = (hoursPrinted <= 0) ? $"{minutesPrinted}:{secondsPrinted:00}" : $"{hoursPrinted}:{minutesPrinted:00}:{secondsPrinted:00}";
progressDial.LayerIndex = printer.Connection.CurrentlyPrintingLayer;
progressDial.LayerCompletedRatio = printer.Connection.RatioIntoCurrentLayer;
progressDial.CompletedRatio = printer.Connection.PercentComplete / 100;
switch (printer.Connection.CommunicationState)
{
case CommunicationStates.PreparingToPrint:
case CommunicationStates.Printing:
case CommunicationStates.Paused:
bodyRow.Visible = true;
break;
default:
bodyRow.Visible = false;
break;
}
}, 1);
bodyRow.Closed += (s, e) => runningInterval.Continue = false;
bodyRow.Visible = false;
return(bodyRow);
}
public RunningTaskRow(string title, RunningTaskDetails taskDetails, ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
this.taskDetails = taskDetails;
this.theme = theme;
this.MinimumSize = new Vector2(100, 20);
var detailsPanel = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
};
var rowContainer = new GuiWidget()
{
VAnchor = VAnchor.Fit,
HAnchor = HAnchor.Stretch,
};
this.AddChild(rowContainer);
var topRow = new FlowLayoutWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
Padding = 0,
};
rowContainer.AddChild(topRow);
progressBar = new ProgressBar()
{
HAnchor = HAnchor.Stretch,
Height = 2,
VAnchor = VAnchor.Absolute | VAnchor.Bottom,
FillColor = ActiveTheme.Instance.PrimaryAccentColor,
BorderColor = Color.Transparent,
BackgroundColor = ActiveTheme.Instance.TertiaryBackgroundColor,
Margin = new BorderDouble(32, 7, theme.ButtonHeight * 2 + 14, 0),
};
rowContainer.AddChild(progressBar);
expandButton = new ExpandCheckboxButton(!string.IsNullOrWhiteSpace(title) ? title : taskDetails.Title, theme, 10)
{
VAnchor = VAnchor.Center | VAnchor.Fit,
HAnchor = HAnchor.Stretch,
Checked = false,
Padding = 0
};
expandButton.CheckedStateChanged += (s, e) =>
{
taskDetails.IsExpanded = expandButton.Checked;
SetExpansionMode(theme, detailsPanel, expandButton.Checked);
};
topRow.AddChild(expandButton);
IconButton resumeButton = null;
var pauseButton = new IconButton(AggContext.StaticData.LoadIcon("fa-pause_12.png", theme.InvertIcons), theme)
{
Margin = theme.ButtonSpacing,
Enabled = taskDetails.Options?.PauseAction != null,
ToolTipText = taskDetails.Options?.PauseToolTip ?? "Pause".Localize()
};
if (taskDetails.Options?.IsPaused != null)
{
RunningInterval runningInterval = null;
runningInterval = UiThread.SetInterval(() =>
{
if (taskDetails.Options.IsPaused())
{
pauseButton.Visible = false;
resumeButton.Visible = true;
}
else
{
pauseButton.Visible = true;
resumeButton.Visible = false;
}
if (this.HasBeenClosed)
{
runningInterval.Continue = false;
}
}, .2);
}
pauseButton.Click += (s, e) =>
{
taskDetails.Options?.PauseAction();
pauseButton.Visible = false;
resumeButton.Visible = true;
};
topRow.AddChild(pauseButton);
resumeButton = new IconButton(AggContext.StaticData.LoadIcon("fa-play_12.png", theme.InvertIcons), theme)
{
Visible = false,
Margin = theme.ButtonSpacing,
ToolTipText = taskDetails.Options?.ResumeToolTip ?? "Resume".Localize(),
Name = "Resume Task Button"
};
resumeButton.Click += (s, e) =>
{
taskDetails.Options?.ResumeAction();
pauseButton.Visible = true;
resumeButton.Visible = false;
};
topRow.AddChild(resumeButton);
var stopButton = new IconButton(AggContext.StaticData.LoadIcon("fa-stop_12.png", theme.InvertIcons), theme)
{
Margin = theme.ButtonSpacing,
Name = "Stop Task Button",
ToolTipText = taskDetails.Options?.StopToolTip ?? "Cancel".Localize()
};
stopButton.Click += (s, e) =>
{
var stopAction = taskDetails.Options?.StopAction;
if (stopAction == null)
{
taskDetails.CancelTask();
}
else
{
stopAction.Invoke();
}
};
topRow.AddChild(stopButton);
this.AddChild(detailsPanel);
// Add rich progress controls
if (taskDetails.Options?.RichProgressWidget?.Invoke() is GuiWidget guiWidget)
{
detailsPanel.AddChild(guiWidget);
}
if (taskDetails.Options?.ReadOnlyReporting == true)
{
stopButton.Visible = false;
pauseButton.Visible = false;
resumeButton.Visible = false;
// Ensure the top row is as big as it would be with buttons
topRow.MinimumSize = new Vector2(0, resumeButton.Height);
}
SetExpansionMode(theme, detailsPanel, taskDetails.IsExpanded);
taskDetails.ProgressChanged += TaskDetails_ProgressChanged;
}
public PartPreviewContent(ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
this.AnchorAll();
var extensionArea = new LeftClipFlowLayoutWidget()
{
BackgroundColor = theme.TabBarBackground,
VAnchor = VAnchor.Stretch,
Padding = new BorderDouble(left: 8)
};
tabControl = new ChromeTabs(extensionArea, theme)
{
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Stretch,
BackgroundColor = ActiveTheme.Instance.PrimaryBackgroundColor,
BorderColor = theme.MinimalShade,
Border = new BorderDouble(left: 1),
NewTabPage = () =>
{
return(new StartTabPage(this, theme));
}
};
tabControl.ActiveTabChanged += (s, e) =>
{
if (this.tabControl.ActiveTab?.TabContent is PartTabPage tabPage)
{
var dragDropData = ApplicationController.Instance.DragDropData;
// Set reference on tab change
dragDropData.View3DWidget = tabPage.view3DWidget;
dragDropData.SceneContext = tabPage.sceneContext;
}
};
// Force the ActionArea to be as high as ButtonHeight
tabControl.TabBar.ActionArea.MinimumSize = new Vector2(0, theme.ButtonHeight);
tabControl.TabBar.BackgroundColor = theme.TabBarBackground;
tabControl.TabBar.BorderColor = theme.ActiveTabColor;
// Force common padding into top region
tabControl.TabBar.Padding = theme.TabbarPadding.Clone(top: theme.TabbarPadding.Top * 2, bottom: 0);
// add in a what's new button
var seeWhatsNewButton = new LinkLabel("What's New...".Localize(), theme)
{
Name = "What's New Link",
ToolTipText = "See what's new in this version of MatterControl".Localize(),
VAnchor = VAnchor.Center,
Margin = new BorderDouble(10, 0),
TextColor = theme.Colors.PrimaryTextColor
};
seeWhatsNewButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
UserSettings.Instance.set(UserSettingsKey.LastReadWhatsNew, JsonConvert.SerializeObject(DateTime.Now));
DialogWindow.Show(new HelpPage("What's New"));
});
tabControl.TabBar.ActionArea.AddChild(seeWhatsNewButton);
// add in the update available button
var updateAvailableButton = new LinkLabel("Update Available".Localize(), theme)
{
Visible = false,
};
// make the function inline so we don't have to create members for the buttons
EventHandler SetLinkButtonsVisibility = (s, e) =>
{
if (UserSettings.Instance.HasLookedAtWhatsNew())
{
// hide it
seeWhatsNewButton.Visible = false;
}
if (UpdateControlData.Instance.UpdateStatus == UpdateControlData.UpdateStatusStates.UpdateAvailable)
{
updateAvailableButton.Visible = true;
// if we are going to show the update link hide the whats new link no matter what
seeWhatsNewButton.Visible = false;
}
else
{
updateAvailableButton.Visible = false;
}
};
UserSettings.Instance.Changed += SetLinkButtonsVisibility;
Closed += (s, e) => UserSettings.Instance.Changed -= SetLinkButtonsVisibility;
RunningInterval showUpdateInterval = null;
updateAvailableButton.VisibleChanged += (s, e) =>
{
if (!updateAvailableButton.Visible)
{
if (showUpdateInterval != null)
{
showUpdateInterval.Continue = false;
showUpdateInterval = null;
}
return;
}
showUpdateInterval = UiThread.SetInterval(() =>
{
double displayTime = 1;
double pulseTime = 1;
double totalSeconds = 0;
var textWidgets = updateAvailableButton.Descendants <TextWidget>().Where((w) => w.Visible == true).ToArray();
Color startColor = theme.Colors.PrimaryTextColor;
// Show a highlight on the button as the user did not click it
Animation flashBackground = null;
flashBackground = new Animation()
{
DrawTarget = updateAvailableButton,
FramesPerSecond = 10,
Update = (s1, updateEvent) =>
{
totalSeconds += updateEvent.SecondsPassed;
if (totalSeconds < displayTime)
{
double blend = AttentionGetter.GetFadeInOutPulseRatio(totalSeconds, pulseTime);
var color = new Color(startColor, (int)((1 - blend) * 255));
foreach (var textWidget in textWidgets)
{
textWidget.TextColor = color;
}
}
else
{
foreach (var textWidget in textWidgets)
{
textWidget.TextColor = startColor;
}
flashBackground.Stop();
}
}
};
flashBackground.Start();
}, 120);
};
updateAvailableButton.Name = "Update Available Link";
SetLinkButtonsVisibility(this, null);
updateAvailableButton.ToolTipText = "There is a new update available for download".Localize();
updateAvailableButton.VAnchor = VAnchor.Center;
updateAvailableButton.Margin = new BorderDouble(10, 0);
updateAvailableButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
UiThread.RunOnIdle(() =>
{
UpdateControlData.Instance.CheckForUpdate();
DialogWindow.Show <CheckForUpdatesPage>();
});
});
tabControl.TabBar.ActionArea.AddChild(updateAvailableButton);
UpdateControlData.Instance.UpdateStatusChanged.RegisterEvent(SetLinkButtonsVisibility, ref unregisterEvents);
this.AddChild(tabControl);
ActiveSliceSettings.SettingChanged.RegisterEvent((s, e) =>
{
if (e is StringEventArgs stringEvent &&
stringEvent.Data == SettingsKey.printer_name &&
printerTab != null)
{
printerTab.Text = ActiveSliceSettings.Instance.GetValue(SettingsKey.printer_name);
}
}, ref unregisterEvents);
ActiveSliceSettings.ActivePrinterChanged.RegisterEvent((s, e) =>
{
var activePrinter = ApplicationController.Instance.ActivePrinter;
// If ActivePrinter has been nulled and a printer tab is open, close it
var tab1 = tabControl.AllTabs.Skip(1).FirstOrDefault();
if ((activePrinter == null || !activePrinter.Settings.PrinterSelected) &&
tab1?.TabContent is PrinterTabPage)
{
tabControl.RemoveTab(tab1);
}
else
{
this.CreatePrinterTab(activePrinter, theme);
}
}, ref unregisterEvents);
ApplicationController.Instance.NotifyPrintersTabRightElement(extensionArea);
// Show fixed start page
tabControl.AddTab(
new ChromeTab("Start".Localize(), tabControl, tabControl.NewTabPage(), theme, hasClose: false)
{
MinimumSize = new Vector2(0, theme.TabButtonHeight),
Name = "Start Tab",
Padding = new BorderDouble(15, 0)
});
// Add a tab for the current printer
if (ActiveSliceSettings.Instance.PrinterSelected)
{
this.CreatePrinterTab(ApplicationController.Instance.ActivePrinter, theme);
}
// Restore active tabs
foreach (var bed in ApplicationController.Instance.Workspaces)
{
this.CreatePartTab("New Part", bed, theme);
}
}
public static GuiWidget PrintProgressWidget(PrinterConfig printer, ThemeConfig theme)
{
var bodyRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Top | VAnchor.Fit,
//BackgroundColor = new Color(theme.Colors.PrimaryBackgroundColor, 128),
MinimumSize = new Vector2(275, 140),
};
// Progress section
var expandingContainer = new HorizontalSpacer()
{
VAnchor = VAnchor.Fit | VAnchor.Center
};
bodyRow.AddChild(expandingContainer);
var progressContainer = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
VAnchor = VAnchor.Center | VAnchor.Fit,
HAnchor = HAnchor.Stretch,
};
expandingContainer.AddChild(progressContainer);
var progressDial = new ProgressDial(theme)
{
HAnchor = HAnchor.Center,
Height = 200 * DeviceScale,
Width = 200 * DeviceScale
};
progressContainer.AddChild(progressDial);
var bottomRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit
};
progressContainer.AddChild(bottomRow);
var resliceMessageRow = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
Visible = false
};
progressContainer.AddChild(resliceMessageRow);
var timeContainer = new FlowLayoutWidget()
{
HAnchor = HAnchor.Center | HAnchor.Fit,
Margin = 3
};
bottomRow.AddChild(timeContainer);
// we can only reslice on 64 bit, because in 64 bit we always have the gcode loaded
if (IntPtr.Size == 8)
{
var resliceButton = new TextButton("Re-Slice", theme)
{
HAnchor = HAnchor.Right,
VAnchor = VAnchor.Center,
Margin = new BorderDouble(0, 0, 7, 0),
Name = "Re-Slice Button"
};
bool activelySlicing = false;
resliceButton.Click += (s, e) =>
{
resliceButton.Enabled = false;
UiThread.RunOnIdle(async() =>
{
bool doSlicing = !activelySlicing && printer.Bed.EditContext.SourceItem != null;
if (doSlicing)
{
var errors = printer.ValidateSettings();
if (errors.Any(err => err.ErrorLevel == ValidationErrorLevel.Error))
{
doSlicing = false;
ApplicationController.Instance.ShowValidationErrors("Slicing Error".Localize(), errors);
}
}
if (doSlicing)
{
activelySlicing = true;
if (bottomRow.Name == null)
{
bottomRow.Name = printer.Bed.EditContext.GCodeFilePath(printer);
}
await ApplicationController.Instance.Tasks.Execute("Saving".Localize(), printer, printer.Bed.SaveChanges);
// start up a new slice on a background thread
await ApplicationController.Instance.SliceItemLoadOutput(
printer,
printer.Bed.Scene,
printer.Bed.EditContext.GCodeFilePath(printer));
// Switch to the 3D layer view if on Model view
if (printer.ViewState.ViewMode == PartViewMode.Model)
{
printer.ViewState.ViewMode = PartViewMode.Layers3D;
}
resliceMessageRow.Visible = true;
resliceMessageRow.VAnchor = VAnchor.Absolute;
resliceMessageRow.VAnchor = VAnchor.Fit;
}
else
{
resliceButton.Enabled = true;
}
});
};
bottomRow.AddChild(resliceButton);
// setup the message row
{
// when it is done queue it to the change to gcode stream
var switchMessage = "Switch to new G-Code?\n\nBefore you switch, check that your are seeing the changes you expect.".Localize();
resliceMessageRow.AddChild(new WrappedTextWidget(switchMessage, theme.DefaultFontSize, textColor: theme.TextColor)
{
Margin = new BorderDouble(7, 3)
});
var switchButtonRow = new FlowLayoutWidget(FlowDirection.RightToLeft)
{
HAnchor = HAnchor.Stretch
};
resliceMessageRow.AddChild(switchButtonRow);
var switchButton = new TextButton("Switch", theme)
{
VAnchor = VAnchor.Center,
Margin = new BorderDouble(5),
Name = "Switch Button"
};
switchButtonRow.AddChild(switchButton);
switchButton.Click += (s, e) =>
{
if (printer.Connection != null &&
(printer.Connection.Printing || printer.Connection.Paused))
{
printer.Connection.SwitchToGCode(printer.Bed.EditContext.GCodeFilePath(printer));
bottomRow.Name = printer.Bed.EditContext.GCodeFilePath(printer);
}
activelySlicing = false;
resliceButton.Enabled = true;
resliceMessageRow.Visible = false;
};
var cancelButton = new TextButton("Cancel", theme)
{
VAnchor = VAnchor.Center,
Margin = new BorderDouble(5),
Name = "Cancel Re-Slice Button"
};
switchButtonRow.AddChild(cancelButton);
cancelButton.Click += async(s, e) =>
{
await ApplicationController.Instance.SliceItemLoadOutput(
printer,
printer.Bed.Scene,
bottomRow.Name);
activelySlicing = false;
resliceButton.Enabled = true;
resliceMessageRow.Visible = false;
};
}
}
timeContainer.AddChild(new ImageWidget(AggContext.StaticData.LoadIcon("fa-clock_24.png", theme.InvertIcons))
{
VAnchor = VAnchor.Center
});
var timeWidget = new TextWidget("", pointSize: 22, textColor: theme.TextColor)
{
AutoExpandBoundsToText = true,
Margin = new BorderDouble(10, 0, 0, 0),
VAnchor = VAnchor.Center,
};
timeContainer.AddChild(timeWidget);
var runningInterval = UiThread.SetInterval(
() =>
{
int secondsPrinted = printer.Connection.SecondsPrinted;
int hoursPrinted = (int)(secondsPrinted / (60 * 60));
int minutesPrinted = (secondsPrinted / 60 - hoursPrinted * 60);
secondsPrinted = secondsPrinted % 60;
// TODO: Consider if the consistency of a common time format would look and feel better than changing formats based on elapsed duration
timeWidget.Text = (hoursPrinted <= 0) ? $"{minutesPrinted}:{secondsPrinted:00}" : $"{hoursPrinted}:{minutesPrinted:00}:{secondsPrinted:00}";
progressDial.LayerIndex = printer.Connection.CurrentlyPrintingLayer;
progressDial.LayerCompletedRatio = printer.Connection.RatioIntoCurrentLayer;
progressDial.CompletedRatio = printer.Connection.PercentComplete / 100;
switch (printer.Connection.CommunicationState)
{
case CommunicationStates.PreparingToPrint:
case CommunicationStates.Printing:
case CommunicationStates.Paused:
bodyRow.Visible = true;
break;
default:
bodyRow.Visible = false;
break;
}
}, 1);
bodyRow.Closed += (s, e) => UiThread.ClearInterval(runningInterval);
bodyRow.Visible = false;
return(bodyRow);
}
public MainViewWidget(ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
this.AnchorAll();
this.theme = theme;
this.Name = "PartPreviewContent";
this.BackgroundColor = theme.BackgroundColor;
// Push TouchScreenMode into GuiWidget
GuiWidget.TouchScreenMode = UserSettings.Instance.IsTouchScreen;
var extensionArea = new LeftClipFlowLayoutWidget()
{
BackgroundColor = theme.TabBarBackground,
VAnchor = VAnchor.Stretch,
Padding = new BorderDouble(left: 8)
};
tabControl = new ChromeTabs(extensionArea, theme)
{
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Stretch,
BackgroundColor = theme.BackgroundColor,
BorderColor = theme.MinimalShade,
Border = new BorderDouble(left: 1),
};
tabControl.PlusClicked += (s, e) =>
{
UiThread.RunOnIdle(() =>
{
this.CreatePartTab().ConfigureAwait(false);
});
};
tabControl.ActiveTabChanged += (s, e) =>
{
if (this.tabControl.ActiveTab?.TabContent is PartTabPage tabPage)
{
var dragDropData = ApplicationController.Instance.DragDropData;
// Set reference on tab change
dragDropData.View3DWidget = tabPage.view3DWidget;
dragDropData.SceneContext = tabPage.sceneContext;
ApplicationController.Instance.PrinterTabSelected = true;
}
else
{
ApplicationController.Instance.PrinterTabSelected = false;
}
ApplicationController.Instance.MainTabKey = tabControl.SelectedTabKey;
};
// Force the ActionArea to be as high as ButtonHeight
tabControl.TabBar.ActionArea.MinimumSize = new Vector2(0, theme.ButtonHeight);
tabControl.TabBar.BackgroundColor = theme.TabBarBackground;
tabControl.TabBar.BorderColor = theme.BackgroundColor;
// Force common padding into top region
tabControl.TabBar.Padding = theme.TabbarPadding.Clone(top: theme.TabbarPadding.Top * 2, bottom: 0);
// add in a what's new button
seeWhatsNewButton = new LinkLabel("What's New...".Localize(), theme)
{
Name = "What's New Link",
ToolTipText = "See what's new in this version of MatterControl".Localize(),
VAnchor = VAnchor.Center,
Margin = new BorderDouble(10, 0),
TextColor = theme.TextColor
};
seeWhatsNewButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
UserSettings.Instance.set(UserSettingsKey.LastReadWhatsNew, JsonConvert.SerializeObject(DateTime.Now));
DialogWindow.Show(new HelpPage("What's New"));
});
tabControl.TabBar.ActionArea.AddChild(seeWhatsNewButton);
// add in the update available button
updateAvailableButton = new LinkLabel("Update Available".Localize(), theme)
{
Visible = false,
Name = "Update Available Link",
ToolTipText = "There is a new update available for download".Localize(),
VAnchor = VAnchor.Center,
Margin = new BorderDouble(10, 0)
};
// Register listeners
UserSettings.Instance.SettingChanged += SetLinkButtonsVisibility;
RunningInterval showUpdateInterval = null;
updateAvailableButton.VisibleChanged += (s, e) =>
{
if (!updateAvailableButton.Visible)
{
if (showUpdateInterval != null)
{
UiThread.ClearInterval(showUpdateInterval);
showUpdateInterval = null;
}
return;
}
showUpdateInterval = UiThread.SetInterval(() =>
{
double displayTime = 1;
double pulseTime = 1;
double totalSeconds = 0;
var textWidgets = updateAvailableButton.Descendants <TextWidget>().Where((w) => w.Visible == true).ToArray();
Color startColor = theme.TextColor;
// Show a highlight on the button as the user did not click it
Animation flashBackground = null;
flashBackground = new Animation()
{
DrawTarget = updateAvailableButton,
FramesPerSecond = 10,
Update = (s1, updateEvent) =>
{
totalSeconds += updateEvent.SecondsPassed;
if (totalSeconds < displayTime)
{
double blend = AttentionGetter.GetFadeInOutPulseRatio(totalSeconds, pulseTime);
var color = new Color(startColor, (int)((1 - blend) * 255));
foreach (var textWidget in textWidgets)
{
textWidget.TextColor = color;
}
}
else
{
foreach (var textWidget in textWidgets)
{
textWidget.TextColor = startColor;
}
flashBackground.Stop();
}
}
};
flashBackground.Start();
}, 120);
};
SetLinkButtonsVisibility(this, null);
updateAvailableButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
UpdateControlData.Instance.CheckForUpdate();
DialogWindow.Show <CheckForUpdatesPage>();
});
tabControl.TabBar.ActionArea.AddChild(updateAvailableButton);
this.AddChild(tabControl);
ApplicationController.Instance.NotifyPrintersTabRightElement(extensionArea);
// Store tab
tabControl.AddTab(
new ChromeTab("Store", "Store".Localize(), tabControl, new StoreTabPage(theme), theme, hasClose: false)
{
MinimumSize = new Vector2(0, theme.TabButtonHeight),
Name = "Store Tab",
Padding = new BorderDouble(15, 0),
});
// Library tab
var libraryWidget = new LibraryWidget(this, theme)
{
BackgroundColor = theme.BackgroundColor
};
tabControl.AddTab(
new ChromeTab("Library", "Library".Localize(), tabControl, libraryWidget, theme, hasClose: false)
{
MinimumSize = new Vector2(0, theme.TabButtonHeight),
Name = "Library Tab",
Padding = new BorderDouble(15, 0),
});
// Hardware tab
tabControl.AddTab(
new ChromeTab(
"Hardware",
"Hardware".Localize(),
tabControl,
new HardwareTabPage(theme)
{
BackgroundColor = theme.BackgroundColor
},
theme,
hasClose: false)
{
MinimumSize = new Vector2(0, theme.TabButtonHeight),
Name = "Hardware Tab",
Padding = new BorderDouble(15, 0),
});
if (ApplicationController.Instance.Workspaces.Count == 0)
{
this.CreatePartTab().ConfigureAwait(false);
}
string tabKey = ApplicationController.Instance.MainTabKey;
if (string.IsNullOrEmpty(tabKey))
{
tabKey = "Hardware";
}
// HACK: Restore to the first printer tab if PrinterTabSelected and tabKey not found. This allows sign in/out to remain on the printer tab across different users
if (!tabControl.AllTabs.Any(t => t.Key == tabKey) &&
ApplicationController.Instance.PrinterTabSelected)
{
var key = tabControl.AllTabs.Where(t => t.TabContent is PrinterTabPage).FirstOrDefault()?.Key;
if (key != null)
{
tabKey = key;
}
}
var brandMenu = new BrandMenuButton(theme)
{
HAnchor = HAnchor.Fit,
VAnchor = VAnchor.Fit,
BackgroundColor = theme.TabBarBackground,
Padding = theme.TabbarPadding.Clone(right: theme.DefaultContainerPadding)
};
tabControl.TabBar.ActionArea.AddChild(brandMenu, 0);
// Restore active tabs
foreach (var workspace in ApplicationController.Instance.Workspaces)
{
this.CreatePartTab(workspace);
}
tabControl.SelectedTabKey = tabKey;
statusBar = new Toolbar(theme)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Absolute,
Padding = 1,
Height = 22,
BackgroundColor = theme.BackgroundColor,
Border = new BorderDouble(top: 1),
BorderColor = theme.BorderColor20,
};
this.AddChild(statusBar);
statusBar.ActionArea.VAnchor = VAnchor.Stretch;
tasksContainer = new FlowLayoutWidget(FlowDirection.LeftToRight)
{
HAnchor = HAnchor.Fit,
VAnchor = VAnchor.Stretch,
BackgroundColor = theme.MinimalShade,
Name = "runningTasksPanel"
};
statusBar.AddChild(tasksContainer);
var tasks = ApplicationController.Instance.Tasks;
tasks.TasksChanged += (s, e) =>
{
RenderRunningTasks(theme, tasks);
};
stretchStatusPanel = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch,
Padding = new BorderDouble(right: 3),
Margin = new BorderDouble(right: 2, top: 1, bottom: 1),
Border = new BorderDouble(1),
BackgroundColor = theme.MinimalShade.WithAlpha(10),
BorderColor = theme.SlightShade,
Width = 200
};
statusBar.AddChild(stretchStatusPanel);
var panelBackgroundColor = theme.MinimalShade.WithAlpha(10);
statusBar.AddChild(
this.CreateThemeStatusPanel(theme, panelBackgroundColor));
statusBar.AddChild(
this.CreateNetworkStatusPanel(theme));
this.RenderRunningTasks(theme, tasks);
// Register listeners
PrinterSettings.AnyPrinterSettingChanged += Printer_SettingChanged;
ApplicationController.Instance.OpenPrintersChanged += OpenPrinters_Changed;
UpdateControlData.Instance.UpdateStatusChanged.RegisterEvent((s, e) =>
{
SetLinkButtonsVisibility(s, new StringEventArgs("Unknown"));
}, ref unregisterEvents);
ApplicationController.Instance.MainView = this;
}
public InlineEditControl(string defaultSizeString = "-0000.00")
{
theme = AppContext.Theme;
base.Visible = false;
double pointSize = 10;
this.Padding = new BorderDouble(3);
numberDisplay = new TextWidget(defaultSizeString, 0, 0, pointSize, justification: Agg.Font.Justification.Center, textColor: theme.TextColor)
{
Visible = false,
VAnchor = VAnchor.Bottom,
HAnchor = HAnchor.Left,
Text = "0",
AutoExpandBoundsToText = true,
};
this.BeforeDraw += (s, e) =>
{
if (s is GuiWidget widget)
{
var test = true;
if (test)
{
// return;
}
var bounds = widget.LocalBounds;
e.Graphics2D.Render(new RoundedRect(bounds, 3 * GuiWidget.DeviceScale), theme.BackgroundColor.WithAlpha(200));
}
};
AddChild(numberDisplay);
numberEdit = new MHNumberEdit(0, theme, pixelWidth: numberDisplay.Width, allowNegatives: true, allowDecimals: true)
{
Visible = false,
VAnchor = VAnchor.Bottom,
HAnchor = HAnchor.Left,
SelectAllOnFocus = true,
};
numberEdit.ActuallNumberEdit.InternalNumberEdit.TextChanged += (s, e) =>
{
numberDisplay.Text = GetDisplayString == null ? "None" : GetDisplayString.Invoke(Value);
this.OnTextChanged(e);
};
numberEdit.ActuallNumberEdit.InternalNumberEdit.MaxDecimalsPlaces = 2;
numberEdit.ActuallNumberEdit.EditComplete += (s, e) =>
{
EditComplete?.Invoke(this, e);
timeSinceMouseUp.Restart();
numberEdit.Visible = false;
numberDisplay.Visible = true;
};
AddChild(numberEdit);
VAnchor = VAnchor.Fit;
HAnchor = HAnchor.Fit;
runningInterval = UiThread.SetInterval(HideIfApplicable, .1);
}
