public static Rect ReturnDimOnMap(List <Vector3> poly)
{
Rect to = U2D.FromPolyToRect(poly);
to = U2D.ReturnRectYInverted(to);
return(to);
}
/// <summary>
/// Taken a list of vectors 3 will find NW, NE, and SW and from there will create a new rectangle
/// Returns a rectangle in our system where North is on the higher Y value always
///
/// Y val flipped at the end
/// </summary>
public static Rect FromALotOfVertexToRect(List <Vector3> list)
{
List <float> xS = UList.ReturnAxisList(list, H.X);
List <float> zS = UList.ReturnAxisList(list, H.Z);
float minX = UMath.ReturnMinimum(xS);
float maxX = UMath.ReturnMax(xS);
float minZ = UMath.ReturnMinimum(zS);
float maxZ = UMath.ReturnMax(zS);
//Poly List that only need a valid NW, NE, and SW
Vector3 NW = new Vector3(minX, 0, maxZ);
Vector3 NE = new Vector3(maxX, 0, maxZ);
Vector3 SE = new Vector3(maxX, 0, minZ);
Vector3 SW = new Vector3(minX, 0, minZ);
List <Vector3> poly = new List <Vector3>()
{
NW, NE, SE, SW
};
//here i find the Rect from this poly and then
// I invert the Y of the recatangle... other wise this big rectangle
//is not overlapping anything will be far off in the Cordinates...
//Due to North(up) is bigger here say 100,, and South(down) less say 0 all this on World Z axis
//As long as MeshManager Hover Current Vertices is big as is its now 9 Lots (each lot 5x5 real polys)
//the Rect of the buildings will work flawlessly
return(U2D.ReturnRectYInverted(U2D.FromPolyToRect(poly)));
}
/// <summary>
/// Will add a poly with the seq NW, NE, SE, SW to the _allBuilding List. then will call UpdateCurrentVertexRect()
/// Adds the file to Registro All that is the save list to file of buildings
/// </summary>
public void AddBuildToAll(Building build, List <Vector3> poly, Ca categ, Vector3 iniPosition,
Inventory inventory,
List <string> PeopleDict,
List <VectorLand> LandZone1,
List <Vector3> polyHoriz = null,
List <Vector3> tilePosVert = null, List <Vector3> tilePosHor = null, List <Vector3> planesOnAirPos = null,
Vector3 tileScale = new Vector3(), List <int> parts = null,
H dominantSide = H.None, H startingStage = H.None, int rotationFacerIndex = -1, string materialKey = "",
List <Vector3> planesOnSoilPos = null, List <int> partsOnSoil = null, Vector3 min = new Vector3(),
Vector3 max = new Vector3(), H instructionP = H.None, BookedHome BookedHome1 = null,
Dispatch dispatch = null, Family[] Families = null,
int dollarsPay = 0,
List <Vector3> anchors = null, Dock dock = null, string root = "",
BuildersManager buildersManager = null
)
{
// 12 hours to find this OMG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
// I was creating the recatblgele and not inverting Y.. then I invert Y but didint inverted in
//IsColliding() chet !!!! And i knew it bz i inverted the big rectangle...
//with the rectangles inverted works like a charm... we have to do it bz im using North as bigger
//and south as less... in the Rect cordinates is the other way around
//this is the usual poly will be filled for eg regular structures only use this one.
//For ways is the vertic bound
var to = ReturnDimOnMap(poly);
Rect toHoriz = new Rect();
if (polyHoriz != null)
{
toHoriz = U2D.FromPolyToRect(polyHoriz);
toHoriz = U2D.ReturnRectYInverted(toHoriz);
}
//ading to All
RegFile regFile = new RegFile(build, to, categ, iniPosition,
inventory,
PeopleDict, LandZone1,
toHoriz, tilePosVert: tilePosVert, tilePosHor: tilePosHor,
planesOnAirPos: planesOnAirPos, tileScale: tileScale, partsOnAir: parts, dominantSide: dominantSide, startingStage: startingStage, rotationFacerIndex: rotationFacerIndex,
materialKey: materialKey, planesOnSoilPos: planesOnSoilPos, partsOnSoil: partsOnSoil, min: min, max: max,
instructionP: instructionP, bookedHome: BookedHome1, dispatch: dispatch, familes: Families,
dollarsPay: dollarsPay,
anchors: anchors, dock: dock, root: root,
buildersManager: buildersManager);
//UVisHelp.CreateHelpers(anchors, Root.blueCube);
AddToAll(regFile);
AddToBuilderManager(build.MyId);
AddSpecToList(categ);
if (_locHoverVert.Count > 0)
{
UpdateCurrentVertexRect(_locHoverVert);
}
//use on the drawing debug functionalitie only:
//toDraw.Add(to);
//toDraw.Add(toHoriz);
}
private void CreateRegion(int index, float iniX, float iniZ, float len, float hei)
{
Rect rect = new Rect();
rect.xMin = iniX;
rect.yMin = iniZ;
rect.width = len;
rect.height = hei;
rect = U2D.ReturnRectYInverted(rect);
_crystalRegions.Add(new CrystalRegion(rect, index));
}
/// <summary>
/// Syas if param is on terrain
///
/// Needs to be Testet
/// </summary>
public static bool IsOnTerrain(Vector3 a)
{
Rect terra = U2D.FromPolyToRect(Program.gameScene.controllerMain.MeshController.wholeMalla);
terra = U2D.ReturnRectYInverted(terra);//must be inverted to be on same Y values
if (terra.Contains(new Vector2(a.x, a.z)))
{
return(true);
}
return(false);
}
List <Rect> CreateRects(List <PreviewWay> prevP)
{
List <Rect> res = new List <Rect>();
for (int i = 0; i < _indexesOfEdgesShore.Count; i++)
{
List <Vector3> boundPoint = prevP[_indexesOfEdgesShore[i]].GetBounds();
boundPoint = UPoly.ScalePoly(boundPoint, 0.3f);
Rect boundRect = U2D.FromPolyToRect(boundPoint);
boundRect = U2D.ReturnRectYInverted(boundRect);
res.Add(boundRect);
}
return(res);
}
/// <summary>
/// If the object pass is colliding with any rectangle of the currentBuilding List returns true
/// </summary>
/// <param name="poly">Object being place on terrain</param>
/// <returns></returns>
public bool IsCollidingWithExisting(List <Vector3> poly)
{
///////////////////////////////////////////////////////////**********************************************
// 12 hours to find this OMG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
// I was creating the recatblgele and not inverting Y.. then I invert Y but didint inverted in
//IsColliding() cheat !!!! And i knew it bz i inverted the big rectangle...
//with the rectangles inverted works like a charm... we have to do it bz im using North as bigger
//and south as leess... in the Rect cordinates is the other way arounds
Rect polyPass = U2D.FromPolyToRect(poly);
polyPass = U2D.ReturnRectYInverted(polyPass);
curr = polyPass;
//make hover bigger 4 hours BUGGGGGGGGGGGGGGGGGGGGGGGGGG
//for (int i = 0; i < _hover.Count; i++)
//{
// if (_hover[i].IsCollidingWithMe(polyPass))
// {
// return true;
// }
//}
//have to changed to be always colliding instead we can check that all are not colliding
//this is to correct a bugg where u can click really fast and structures will build on top
//of wach others
bool res = true;
int count = 0;
for (int i = 0; i < _allRegFile.Count; i++)
{
if (!_allRegFile[i].IsCollidingWithMe(polyPass))
{
count++;
}
else
{
var a = 1;
}
}
//if all the obj are not colliding then...
if (count == _allRegFile.Count)
{
res = false;
}
return(res);
}
private bool IntersectMyRouteArea(Rect other, int index)
{
List <Vector3> e = Elements[index].Poly;
//means doesnt have Anchors set.. for ex Ways like road
if (e.Count == 0)
{
return(false);
}
Rect a = U2D.ReturnRectYInverted(U2D.FromPolyToRect(e));
if (a.Overlaps(other))
{
return(true);
}
return(false);
}
bool IsCurrInsideOldHome(Crystal c)
{
bool isInside = false;
var oldHome = Brain.GetBuildingFromKey(_person.Brain.MoveToNewHome.OldHomeKey);
if (oldHome != null && oldHome != _person.Home)
{
var oldHomRect = U2D.FromPolyToRect(oldHome.Anchors);
oldHomRect = U2D.ReturnRectYInverted(oldHomRect);
isInside = oldHomRect.Contains(_curr.Position);
}
if (isInside)
{
//Debug.Log("Inside build");
}
return(isInside);
}
/// <summary>
/// The poly pass shoud be really really small like a point. to this be effcective
/// Created to find what is coliiding with a Tile
/// </summary>
/// <param name="poly"></param>
/// <returns></returns>
public H IsCollidingWithWhat(List <Vector3> poly)
{
///////////////////////////////////////////////////////////**********************************************
// 12 hours to find this OMG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
// I was creating the recatblgele and not inverting Y.. then I invert Y but didint inverted in
//IsColliding() cheat !!!! And i knew it bz i inverted the big rectangle...
//with the rectangles inverted works like a charm... we have to do it bz im using North as bigger
//and south as leess... in the Rect cordinates is the other way arounds
Rect polyPass = U2D.FromPolyToRect(poly);
polyPass = U2D.ReturnRectYInverted(polyPass);
curr = polyPass;
for (int i = 0; i < _allRegFile.Count; i++)
{
if (_allRegFile[i].IsCollidingWithMe(polyPass))
{
return(_allRegFile[i].HType);
}
}
return(H.None);
}
private Structure inside;//the structure current point is inside
/// <summary>
/// Returns true if inside a Registro.Structures... sets 'inside' as the building the 't' is in
/// </summary>
/// <param name="t"></param>
/// <returns></returns>
bool IAmInsideABuildNow(Vector3 t)
{
var pos = t;
var p2 = new Vector2(pos.x, pos.z);
var allBuild = BuildingPot.Control.Registro.Structures.ToArray();
bool res = false;
Rect rect = new Rect();
for (int i = 0; i < allBuild.Length; i++)
{
rect = U2D.ReturnRectYInverted(U2D.FromPolyToRect(allBuild[i].Value.Anchors));
if (rect.Contains(p2))
{
inside = allBuild[i].Value;
res = true;
Program.gameScene.AddToMainScreen("Router point inside building:" + allBuild[i].Key);
//Debug.Log("Router point inside building:" + allBuild[i].Key);
//throw new Exception("Router point inside building:" + allBuild[i].Key);
}
}
return(res);
}
public static bool IsOnTerrainManipulateTerrainSize(Vector3 a, float manipulateBy)
{
//bz kkeeps getting smaller
//if (terrainPolyScaled == null)
//{
//bz was referencing that List
var array = Program.gameScene.controllerMain.MeshController.wholeMalla.ToArray();
terrainPolyScaled = UPoly.ScalePoly(array.ToList(), manipulateBy);
//}
Rect terra = U2D.FromPolyToRect(terrainPolyScaled);
terra = U2D.ReturnRectYInverted(terra);//must be inverted to be on same Y values
UVisHelp.CreateDebugLines(terra, Color.yellow);
if (terra.Contains(new Vector2(a.x, a.z)))
{
return(true);
}
return(false);
}