示例#1
0
        static void Main(string[] args)
        {
            String           localCallSign;
            String           cmd;
            String           loopback;
            Int32            channel = 0;
            Int32            baud    = 9600;
            String           tmpc;
            DataLinkProvider dlProvider;
            DataLinkProvider digi1;
            DataLinkProvider digi2;

            Connection.ConnectionParameterBuf conParams;
            Connection.ConnectionStatus       cstat;
            Connection.ConnectionStatus[]     mcstat = new Connection.ConnectionStatus[12];
            DataLinkProvider[] testProvider          = new DataLinkProvider[12];

            Console.Write("Local station callsign-SSID? (e.g. KA1XYZ-5) ? ");
            localCallSign = Console.ReadLine();

            //
            // Set loopback mode to Y if you are not using a TNC.
            //
            Console.Write("Use loopback mode? (y/[n]) ");
            tmpc     = Console.ReadLine();
            loopback = tmpc;

            Console.Write("TNC Channel number? ([0]/1/2) ");
            tmpc = Console.ReadLine();
            if (tmpc.Length > 0)
            {
                channel = Convert.ToInt32(Console.ReadLine());
            }
            //
            // Step 1: Create the low level Com Port that communicates directly
            // with the TNC
            //
            if (loopback.ToUpper().StartsWith("Y"))
            {
                //
                // Use loopback.  No data goes out the serial port
                //
                tncComPort = new COMPort("COM1", 9600, true);
            }
            else
            {
                //
                // No loopback.  Use the real TNC
                //
                Console.Write("Com Port? (COM1, COM2, etc) ");
                String comp = Console.ReadLine().ToUpper();

                Console.Write("Baud? ([9600],19200, etc) ");
                tmpc = Console.ReadLine();
                if (tmpc.Length > 0)
                {
                    baud = Convert.ToInt32(tmpc);           // (JNW Feb 15)
                }

                tncComPort = new COMPort(comp, baud);
            }

            Char[] c = { ' ' };

            //
            // Tell the KISS layer if there are any characters to 'escape' in
            // the data stream.  The reason for this is some KISS implementations
            // (Like the TNC in the Kenwood D710A) actually act upon certain
            // character sequences even when in KISS mode.
            //
            // Example: Escape the 'C' character (needed on TM-D710)
            //
            // You can also add escape byte for non printable characters using the
            // SetEscapedCharList().  In this case, supply a string that contains the
            // comma separated list of bytes to escape.  Example: A string value of:
            // "03, 0d" will exclude byte valus 0x03 and 0x0d
            //
            tncComPort.escapedCharList = "C";

            //tncComPort.SetEscapedCharsList("03, 0d");

            //
            // Step 2: Create a TNC channel on top of the COM port. TNCs like
            // the KPC3+ have one channel (channel 0).  Other TNCs like the KAM
            // Plus have 2 (one for VHF (channel 0) and one for HF (channel 1).  The
            // KISS protocol dictates that TNC Channels MUST be in the range of 0-15.
            //
            tncVHFChannel = tncComPort.CreateChannel(channel);

            //
            // (Optional) Enable the packet monitor function if we want to
            // monitor all incoming and outgoing packets.  Setting the value
            // to 'Both' enables queue monitoring as well as file logging of
            // the packets.  (We defined the filename above by setting the static
            // member: Support.pktLogFile above.)
            //
            tncVHFChannel.packetMonitorEnable = TNCChannel.PacketMonitorType.Both;

            //
            // Step 3: Create a DataLinkProvider assigning it the desited
            // local station callsign-ssid.  Multiple Data Link Providers \
            // are supported, however each must have a unique callsign-ssid.
            //
            dlProvider           = tncVHFChannel.CreateProvider(localCallSign);
            digi1                = tncVHFChannel.CreateProvider("RELAY1");
            digi1.digipeatEnable = true;
            digi2                = tncVHFChannel.CreateProvider("RELAY2");
            digi2.digipeatEnable = true;


            //
            // Note: 3a.1 - 3a-3 are optional steps you would do if you want
            // to change any of the default connection parameter settings for
            // this particular connection, like MAXIFrame, MaxWindowsSize, etc.
            // Unless you are planning to change the defaults, you don't have
            // to do this and can skip right to step 4.
            //

            //
            // Step 3a.1: (Optional) Create a Connection parameter buf to
            // use during XID negotiation.
            //
            conParams = new Connection.ConnectionParameterBuf();

            //
            // Step 3a.2: (Optional) Make any changes to the parameter values
            // in the parameter buffer here
            //

            //conParams.maxWindowSize = 1;
            //conParams.maxIFrame = 2;

            //
            // Step 3a.3: Create a connection using the connection parameters
            // specified in the parameter buffer and skip step 4 below.
            //
            con = dlProvider.CreateConnection(conParams);

            for (Int32 i = 0; i < testProvider.Length; i++)
            {
                testProvider[i] = tncVHFChannel.CreateProvider("T6EST-" + i.ToString());
                mcon[i]         = testProvider[i].CreateConnection(conParams);
                mcon[i].registerStateHandlers.ReportConnectionEvents      += new EventHandler <ConnectionEvents>(NotifyConnectionState);
                mcon[i].registerIndicationHandlers.ReportIndicationEvents += new EventHandler <IndicationEvents>(NotifyIndicationEvents);
            }


            //
            // Step 4: Create the Connection using default parameters
            //
            //con = dlProvider.CreateConnection();

            //
            // Register for connection state change notifications, if desired
            //
            con.registerStateHandlers.ReportConnectionEvents += new EventHandler <ConnectionEvents>(NotifyConnectionState);

            //
            // Register for protocol indication event notifications, if desired
            //
            con.registerIndicationHandlers.ReportIndicationEvents += new EventHandler <IndicationEvents>(NotifyIndicationEvents);

            //
            // Launch our packet monitor thread. (If we chose to monitor packets
            // above).
            //
            MonitorThread      = new Thread(PacketMonitor);
            MonitorThread.Name = "PacketMonitor Thread";
            MonitorThread.Start();

            //
            // Launch the thread the displays the data stream coming back from
            // the remote station
            //
            ReaderThread      = new Thread(Reader);
            ReaderThread.Name = "Reader Thread";
            ReaderThread.Start();

            //
            // Create a thread that adds a second DataLinkProvider with a different
            // callsign that we can perform loopback testing with.  We only start
            // the thread when requested by the command '@listener callsign-ssid'.
            // You would typically only do this when testing in loopback mode.
            //
            // In an applications where you wait for other stations to connect,
            // you can create a pool of connection threads that would permit
            // multiple independent incoming connections to your app simultaneously.
            //
            ResponderThread = new Thread(Responder);

            //
            // Command processing loop
            //
            StringBuilder sb = new StringBuilder("Commands:" + CRLF);

            sb.Append("  @h                       - this help text" + CRLF);
            sb.Append("  @listener callsign-ssid  - Create a second DataLinkProvider for callsign-ssid" + CRLF);
            sb.Append("  @con callsign-ssid [digi1] [digi2]" + CRLF);
            sb.Append("                           - Connect to remote station callsign-ssid using optional relays" + CRLF);
            sb.Append("  @mcon n callsign-ssid    - Connect T6EST-n to remote station callsign-ssid" + CRLF);
            sb.Append("  @xid                     - Initiate XID negotiation" + CRLF);
            sb.Append("  @data callsign-ssid text - Send 'text' to calllsign-ssid as a datagram packet" + CRLF);
            sb.Append("  @test callsign-ssid text - Send a TEST command to callsign-ssid & " + CRLF);
            sb.Append("                                wait 5 seconds for a response" + CRLF);
            sb.Append("  @disc                    - Disconnect from the currently connected station" + CRLF);
            sb.Append("  @mdisc n                 - Disconnect T6EST-n" + CRLF);
            sb.Append("  @digi callsign-ssid      - Create a digipeater at callsign-ssid" + CRLF);
            sb.Append("  @bye                     - Disconnect from the currently connected station & " + CRLF);
            sb.Append("                                and exit the program" + CRLF);
            sb.Append("  @koff                    - Send the Exit KISS mode sequence to the TNC" + CRLF);
            sb.Append("  (other text)             - Send as data to the connected station" + CRLF + CRLF);

            Console.WriteLine(sb.ToString());

            while (true && dlProvider.Enabled)
            {
                //
                // Command loop
                //
                Console.Write(">>> ");
                cmd = Console.ReadLine();
                if (cmd.StartsWith("@h"))
                {
                    Console.WriteLine(sb.ToString());
                    continue;
                }

                if (cmd.StartsWith("@xid"))
                {
                    Console.WriteLine("Initiate XID negotiation with remote.  status: " +
                                      con.InitiateXID().ToString());
                    continue;
                }

                if (cmd.StartsWith("@test "))
                {
                    //
                    // Test command requested
                    //
                    String h  = cmd.Substring(6);
                    Int32  q  = h.IndexOf(" ");
                    String c1 = h.Substring(0, q);
                    h = h.Substring(q + 1);

                    Byte[] resp = dlProvider.LinkTest(c1, "", "",
                                                      Encoding.ASCII.GetBytes(h), 5000);
                    String respC = "(Timeout)";
                    if (resp != null)
                    {
                        respC = Encoding.ASCII.GetString(resp);
                    }
                    Console.WriteLine("Test response: " + respC);
                    continue;
                }

                if (cmd.StartsWith("@koff"))
                {
                    //
                    // Send the Kiss Exit command to the TNC
                    //
                    tncVHFChannel.SetKissModeOff();
                    continue;
                }

                if (cmd.StartsWith("@digi "))
                {
                    //
                    // Start a digipeater
                    //
                    String           h  = cmd.Substring(6);
                    DataLinkProvider dl = tncVHFChannel.CreateProvider(h);
                    dl.digipeatEnable        = true;
                    dl.accessControlListType = DataLinkProvider.AccessControlListType.black;
                    dl.AccessControlListAdd("n6prw-3");
                    continue;
                }

                if (cmd.StartsWith("@data "))
                {
                    //
                    // Send UI datagram
                    //
                    String h  = cmd.Substring(6);
                    Int32  q  = h.IndexOf(" ");
                    String c1 = h.Substring(0, q);
                    h = h.Substring(q + 1);
                    dlProvider.SendDatagram(c1, Encoding.ASCII.GetBytes(h),
                                            Frame.ProtocolVersion.V22);
                    Console.WriteLine("Datagram Sent: " + h);
                    continue;
                }

                if (cmd.StartsWith("@mcon "))
                {
                    //
                    // Connect to remote station
                    //
                    String[] h = cmd.Substring(6).Split(c);
                    Int32    m = 0;

                    if (h.Length == 2)
                    {
                        m         = Convert.ToInt32(h[0]);
                        mcstat[m] = mcon[m].Connect(h[1]);
                        Console.WriteLine("Connect status: " + mcstat[m].ToString());
                    }
                    continue;
                }

                if (cmd.StartsWith("@con "))
                {
                    //
                    // Connect to remote station
                    //
                    cstat = Connection.ConnectionStatus.Busy;
                    String[] h = cmd.Substring(5).Split(c);

                    if (h.Length == 1)
                    {
                        cstat = con.Connect(h[0]);
                    }
                    if (h.Length == 2)
                    {
                        cstat = con.Connect(h[0], h[1]);
                    }
                    if (h.Length == 3)
                    {
                        cstat = con.Connect(h[0], h[1], h[2]);
                    }

                    Console.WriteLine("Connect status: " + cstat.ToString());
                    continue;
                }

                if (cmd.StartsWith("@listener "))
                {
                    //
                    // Start the listener we'll use for loopback testing
                    //
                    String h = cmd.Substring(10);
                    responderCallSign = h;
                    if (!ResponderThread.IsAlive)
                    {
                        ResponderThread.Start();
                    }
                    continue;
                }

                if (cmd.StartsWith("@disc"))
                {
                    //
                    // Disconnect from the remote station
                    //
                    cstat = con.Disconnect();
                    Console.WriteLine("Disconnected:  status: " + cstat.ToString());
                    continue;
                }
                if (cmd.StartsWith("@mdisc "))
                {
                    //
                    // Disconnect from the remote station
                    //
                    String[] h = cmd.Substring(7).Split(c);
                    Int32    m = 0;
                    if (h.Length == 1)
                    {
                        m         = Convert.ToInt32(h[0]);
                        mcstat[m] = mcon[m].Disconnect();
                        Console.WriteLine("Disconnected:  status: " + mcstat[m].ToString());
                    }
                    continue;
                }


                if (cmd.StartsWith("@exit"))
                {
                    //
                    // Exit KISS mode
                    //
                    tncVHFChannel.SetKissModeOff();
                    Console.WriteLine("Kiss mode exited");
                    break;
                }

                if (cmd.StartsWith("@bye"))
                {
                    //
                    // Disconnect and close the program
                    //
                    cstat = con.Disconnect();
                    Console.WriteLine("Disconnected:  status: " + cstat.ToString());
                    break;
                }

                // everything else is treated as data

                if (!con.isConnected)
                {
                    Console.WriteLine("Not connected...");
                    continue;
                }
                else
                {
                    if (cmd.Length > 0)
                    {
                        con.Send(Encoding.ASCII.GetBytes(cmd + CR));
                    }
                    else
                    {
                        Console.WriteLine("Nothing to send");
                    }
                }
            }
            //con.Close();
            //dlProvider.Close();
            //tncVHFChannel.Close();

            //
            // Time to go.  Just shutting down the lower layer is sufficient.
            // All the upper instances will be shut down as well.
            //
            tncComPort.Close();
            Console.Write("Press return to exit");
            cmd = Console.ReadLine();
        }
示例#2
0
        } // New

        // Function to open the KISS TNC
        private bool Open()
        {
            bool OpenRet = default;

            OpenRet = true;
            string strConfiguration;
            bool   blnInKissStartSequence = false;
            var    strLine      = default(string);
            bool   blnOnAir1200 = false;
            bool   blnOnAir9600 = false;

            strAPSFile = Globals.stcSelectedChannel.TNCConfigurationFile;
            if (File.Exists(strAPSFile) == false)
            {
                Globals.queChannelDisplay.Enqueue("R*** .aps Configuration file not found...");
                OpenRet = false;
            }
            else
            {
                try
                {
                    strConfiguration = File.ReadAllText(strAPSFile);
                    var objStringReader = new StringReader(strConfiguration);
                    do
                    {
                        try
                        {
                            strLine = objStringReader.ReadLine();
                            if (string.IsNullOrEmpty(strLine))
                            {
                                break;
                            }
                            var strCommand = strLine.Split(';');
                            if (!string.IsNullOrEmpty(strCommand[0].Trim()))
                            {
                                var strTokens  = strCommand[0].Trim().Split(' ');
                                var switchExpr = strTokens[0].Trim().ToUpper();
                                switch (switchExpr)
                                {
                                // These key words define the 1200 and  9600 baud segments
                                case "BEGIN1200B":
                                {
                                    blnOnAir1200 = true;
                                    blnOnAir9600 = false;
                                    break;
                                }

                                case "BEGIN9600B":
                                {
                                    blnOnAir9600 = true;
                                    blnOnAir1200 = false;
                                    break;
                                }

                                case "END1200B":
                                {
                                    blnOnAir9600 = false;
                                    blnOnAir1200 = false;
                                    if (Globals.stcSelectedChannel.TNCOnAirBaud == 1200)
                                    {
                                        break;
                                    }
                                    break;
                                }

                                case "END9600B":
                                {
                                    blnOnAir9600 = false;
                                    blnOnAir1200 = false;
                                    if (Globals.stcSelectedChannel.TNCOnAirBaud == 9600)
                                    {
                                        break;
                                    }
                                    break;
                                }
                                }

                                if (blnOnAir1200 & Globals.stcSelectedChannel.TNCOnAirBaud == 1200 | blnOnAir9600 & Globals.stcSelectedChannel.TNCOnAirBaud == 9600)
                                {
                                    var switchExpr1 = strTokens[0].Trim().ToUpper();
                                    switch (switchExpr1)
                                    {
                                    case "KISSSTART":
                                    {
                                        strKissStart           = new string[0];
                                        blnInKissStartSequence = true;
                                        break;
                                    }

                                    case "KISSEND":
                                    {
                                        blnInKissStartSequence = false;
                                        break;
                                    }

                                    case "TXDELAY":
                                    {
                                        intTXDelay = Convert.ToInt32(strTokens[1]);
                                        break;
                                    }

                                    case "PERSISTANCE":
                                    {
                                        intPersistance = Convert.ToInt32(strTokens[1]);
                                        break;
                                    }

                                    case "SLOTTIME":
                                    {
                                        intSlottime = Convert.ToInt32(strTokens[1]);
                                        break;
                                    }

                                    case "FULLDUPLEX":
                                    {
                                        blnFullDuplex = Convert.ToBoolean(strTokens[1]);
                                        break;
                                    }

                                    case "MAXFRAMESIZE":
                                    {
                                        intMaxFrameSize = Convert.ToInt32(strTokens[1]);
                                        break;
                                    }

                                    case "MAXFRAMES":
                                    {
                                        intMaxFrames = Convert.ToInt32(strTokens[1]);
                                        break;
                                    }

                                    case "ACKTIMER":
                                    {
                                        intACKTimer = Convert.ToInt32(strTokens[1]);
                                        break;
                                    }

                                    case "MAXRETRY":
                                    {
                                        intMaxRetry = Convert.ToInt32(strTokens[1]);
                                        break;
                                    }

                                    case "POLLTHRESH":
                                    {
                                        intPollThresh = Convert.ToInt32(strTokens[1]);
                                        break;
                                    }

                                    case "KISSEXIT":
                                    {
                                        blnExitKiss = Convert.ToBoolean(strTokens[1]);
                                        break;
                                    }

                                    case "ESCAPE":
                                    {
                                        strEscapeChars = strTokens[1].Trim();
                                        break;
                                    }

                                    default:
                                    {
                                        if (blnInKissStartSequence)
                                        {
                                            Array.Resize(ref strKissStart, strKissStart.Length + 1);
                                            strKissStart[strKissStart.Length - 1] = strCommand[0].Trim().ToUpper();
                                        }

                                        break;
                                    }
                                    }
                                }
                            }
                        }
                        catch (Exception ex)
                        {
                            Log.Error("[ModemNativeKiss.Open] " + strLine + Globals.CR + ex.Message);
                        }
                    }while (true);
                }
                catch (Exception ex)
                {
                    Log.Error("[ModemNativeKiss.Open] " + ex.Message);
                }
            }

            if (objSerial != null)
            {
                objSerial.Close();
                Thread.Sleep(Globals.intComCloseTime);
                objSerial.Dispose();
                objSerial = null;
            }
            // Open the serial port...
            try
            {
                objSerial = new SerialPort(
                    Globals.stcSelectedChannel.TNCSerialPort,
                    Convert.ToInt32(Globals.stcSelectedChannel.TNCBaudRate),
                    Parity.None,
                    8,
                    StopBits.One);
                objSerial.Handshake = Handshake.None;
                objSerial.RtsEnable = true;
                try
                {
                    objSerial.Open();
                }
                catch
                {
                    Globals.queChannelDisplay.Enqueue("R*** Failed to open serial port on " + Globals.stcSelectedChannel.TNCSerialPort + ". Port may be in use by another application.");
                    Log.Error("[ClinetNativeKISS.Open] Failed to open serial port on " + Globals.stcSelectedChannel.TNCSerialPort);
                    return(false);
                }

                if (objSerial.IsOpen == false)
                {
                    Globals.queChannelDisplay.Enqueue("R*** Failed to open serial port on " + Globals.stcSelectedChannel.TNCSerialPort + ". Port may be in use by another application.");
                    Log.Error("[ModemNativeKiss.Open] Failed to open serial port on " + Globals.stcSelectedChannel.TNCSerialPort);
                    return(false);
                }
                else
                {
                    Globals.queChannelDisplay.Enqueue("G*** Serial port " + Globals.stcSelectedChannel.TNCSerialPort + " opened");
                }
            }
            catch (Exception ex)
            {
                Log.Error("[ModemNativeKiss.Open] " + ex.Message);
                return(false);
            }

            OpenRet = InitializeKISSTnc(); // initialize the TNC to KISS mode

            if (OpenRet == false)
            {
                Log.Error("[ClientNativeKiss.Open] Failed to Initialize KISS TNC");
                enmState = LinkStates.LinkFailed;

                if (objSerial != null)
                {
                    objSerial.Close();
                    Thread.Sleep(Globals.intComCloseTime);
                    objSerial.Dispose();
                    objSerial = null;
                }

                return(false);
            }
            else
            {
                // All OK so set up Peter's Native KISS DLL
                try
                {
                    objKissComPort = new COMPort(objSerial); // Globals.stcSelectedChannel.TNCSerialPort, Convert.ToInt32(Globals.stcSelectedChannel.TNCBaudRate));
                    // set up the optional escape characters
                    if (!string.IsNullOrEmpty(strEscapeChars))
                    {
                        objKissComPort.escapedCharList = strEscapeChars;                     // Escape characters from .aps file
                    }
                    objKissChannel    = objKissComPort.CreateChannel(0);                     // Create TNC Channel 0
                    objKissDLProvider = objKissChannel.CreateProvider(Globals.SiteCallsign); // Create a DLProvider for the Site Call sign
                                                                                             // set up the KISS parameters from default values or as updated from the .aps file
                    objConParam               = new Connection.ConnectionParameterBuf();
                    objConParam.ackTimer      = 1000 * intACKTimer;                          // convert from Sec to ms.
                    objConParam.maxRetry      = intMaxRetry;
                    objConParam.maxIFrame     = intMaxFrameSize;
                    objConParam.maxWindowSize = intMaxFrames;
                    objConParam.pollThresh    = 1000 * intPollThresh; // convert from Sec to ms
                    objKissChannel.SetPersistence(intPersistance);
                    objKissChannel.SetSlotTime(intSlottime);
                    objKissChannel.SetTXDelay(intTXDelay);
                    objKissChannel.SetTXFullDuplex(Convert.ToInt32(blnFullDuplex));
                    enmState = LinkStates.Initialized;
                }
                catch (Exception ex)
                {
                    Log.Error("[ClientNativeKiss.Open] Call to DLL Error: " + ex.ToString());
                    return(false);
                }
            }
            // Extended logging added for debugging
            if (File.Exists(Globals.SiteRootDirectory + @"Log\NativeKISSax25PktLog.log"))
            {
                File.Delete(Globals.SiteRootDirectory + @"Log\NativeKISSax25PktLog.log");
            }

            Support.pktLogFile = Globals.SiteRootDirectory + @"Log\NativeKISSax25PktLog.log";
            objKissChannel.packetMonitorEnable = TNCChannel.PacketMonitorType.LogFile;
            return(OpenRet);
        } // Open