/// <summary>
/// Determines the beam geometry to export after removing invisible geometry.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The beam element to be exported.</param>
/// <param name="geometryElement">The geometry element that contains the beam geometry.</param>
/// <param name="dontExport">An output value that says that the element shouldn't be exported at all.</param>
private static IList <GeometryObject> BeamGeometryToExport(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, out bool dontExport)
{
dontExport = true;
if (element == null || geometryElement == null)
{
return(null);
}
IList <GeometryObject> visibleGeomObjects = new List <GeometryObject>();
{
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
visibleGeomObjects = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document, exporterIFC, solids, meshes);
// If we found solids and meshes, and they are all invisible, don't export the beam.
// If we didn't find solids and meshes, we won't export the beam with ExportBeamAsStandardElement, but will allow the generic
// family export routine to work.
if ((visibleGeomObjects == null || visibleGeomObjects.Count == 0) && (solids.Count > 0 || meshes.Count > 0))
{
return(null);
}
}
dontExport = false;
return(visibleGeomObjects);
}
/// <summary>
/// Calculates net surface area.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="extrusionCreationData">
/// The IFCExtrusionCreationData.
/// </param>
/// <param name="element">
/// The element to calculate the value.
/// </param>
/// <param name="elementType">
/// The element type.
/// </param>
/// <returns>
/// True if the operation succeed, false otherwise.
/// </returns>
public override bool Calculate(ExporterIFC exporterIFC, IFCExtrusionCreationData extrusionCreationData, Element element, ElementType elementType)
{
double areaSum = 0;
SolidMeshGeometryInfo geomInfo = GeometryUtil.GetSolidMeshGeometry(element);
if (geomInfo.SolidsCount() > 0)
{
for (int ii = 0; ii < geomInfo.SolidsCount(); ++ii)
{
foreach (Face f in geomInfo.GetSolids()[ii].Faces)
{
areaSum += f.Area;
}
}
}
if (geomInfo.MeshesCount() > 0)
{
for (int jj = 0; jj < geomInfo.MeshesCount(); ++jj)
{
Mesh geomMesh = geomInfo.GetMeshes()[jj];
XYZ arbitraryOrig = geomMesh.Vertices[0];
for (int ii = 0; ii < geomMesh.NumTriangles; ++ii)
{
MeshTriangle meshTri = geomMesh.get_Triangle(ii);
double a = meshTri.get_Vertex(1).DistanceTo(meshTri.get_Vertex(0));
double b = meshTri.get_Vertex(2).DistanceTo(meshTri.get_Vertex(1));
double c = meshTri.get_Vertex(0).DistanceTo(meshTri.get_Vertex(2));
areaSum += (a + b + c) / 2.0;
}
}
}
m_Area = UnitUtil.ScaleArea(areaSum);
if (m_Area < MathUtil.Eps() * MathUtil.Eps() || m_Area < MathUtil.Eps())
{
if (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, "IfcQtyNetSurfaceArea", out m_Area) == null)
{
if (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, "IfcNetSurfaceArea", out m_Area) == null)
{
ParameterUtil.GetDoubleValueFromElementOrSymbol(element, "NetSurfaceArea", out m_Area);
}
}
m_Area = UnitUtil.ScaleArea(m_Area);
if (m_Area < MathUtil.Eps() * MathUtil.Eps() || m_Area < MathUtil.Eps())
{
return(false);
}
else
{
return(true);
}
}
else
{
return(true);
}
}
/// <summary>
/// Calculates net volume.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="extrusionCreationData">
/// The IFCExtrusionCreationData.
/// </param>
/// <param name="element">
/// The element to calculate the value.
/// </param>
/// <param name="elementType">
/// The element type.
/// </param>
/// <returns>
/// True if the operation succeed, false otherwise.
/// </returns>
public override bool Calculate(ExporterIFC exporterIFC, IFCExtrusionCreationData extrusionCreationData, Element element, ElementType elementType)
{
double vol = 0;
SolidMeshGeometryInfo geomInfo = GeometryUtil.GetSolidMeshGeometry(element);
if (geomInfo.SolidsCount() > 0)
{
for (int ii = 0; ii < geomInfo.SolidsCount(); ++ii)
{
vol += geomInfo.GetSolids()[ii].Volume;
}
}
if (geomInfo.MeshesCount() > 0)
{
for (int jj = 0; jj < geomInfo.MeshesCount(); ++jj)
{
Mesh geomMesh = geomInfo.GetMeshes()[jj];
XYZ arbitraryOrig = geomMesh.Vertices[0];
for (int i = 0; i < geomMesh.NumTriangles; ++i)
{
MeshTriangle meshTri = geomMesh.get_Triangle(i);
XYZ v1 = meshTri.get_Vertex(0) - arbitraryOrig;
XYZ v2 = meshTri.get_Vertex(1) - arbitraryOrig;
XYZ v3 = meshTri.get_Vertex(2) - arbitraryOrig;
vol += v1.DotProduct(v2.CrossProduct(v3)) / 6.0f;
}
}
}
m_Volume = UnitUtil.ScaleVolume(vol);
if (m_Volume < MathUtil.Eps() * MathUtil.Eps() || m_Volume < MathUtil.Eps())
{
if (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, "IfcQtyNetVolume", out m_Volume) == null)
{
if (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, "IfcNetVolume", out m_Volume) == null)
{
ParameterUtil.GetDoubleValueFromElementOrSymbol(element, "NetVolume", out m_Volume);
}
}
m_Volume = UnitUtil.ScaleVolume(m_Volume);
if (m_Volume < MathUtil.Eps())
{
return(false);
}
else
{
return(true);
}
}
else
{
return(true);
}
}
/// <summary>
/// Creates the bounding box representation corresponding to a particular geometry.
/// </summary>
/// <param name="exporterIFC">The exporterIFC.</param>
/// <param name="geomElement">The geometry of the element.</param>
/// <param name="trf">An extra transform to apply, generally used for families.</param>
/// <returns>The handle to the bounding box representation, or null if not valid or not exported.</returns>
public static IFCAnyHandle ExportBoundingBox(ExporterIFC exporterIFC, GeometryElement geomElement, Transform trf)
{
if (!ExporterCacheManager.ExportOptionsCache.ExportBoundingBox)
{
return(null);
}
if (geomElement == null)
{
return(null);
}
SolidMeshGeometryInfo solidMeshCapsule = GeometryUtil.GetSolidMeshGeometry(geomElement, Transform.Identity);
IList <Solid> solids = solidMeshCapsule.GetSolids();
IList <Mesh> meshes = solidMeshCapsule.GetMeshes();
IList <Face> faces = new List <Face>();
return(ExportBoundingBoxFromGeometry(exporterIFC, solids, meshes, faces, trf));
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// First, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go thruough te Revit model orgigin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorPlane = new Plane(floorDir, floorOrigin);
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorPlane, floorExtrusionDirection, null, out completelyClipped);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
repTypes.Add(ShapeRepresentationType.SweptSolid);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
}
if (prodReps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
string entityType = null;
switch (exportType)
{
case IFCExportType.IfcFooting:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCFootingType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCFootingType>(floorElement, ifcEnumType, null);
}
break;
case IFCExportType.IfcCovering:
entityType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCExportType.IfcRamp:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCRampType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCRampType>(floorElement, ifcEnumType, null);
}
break;
default:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
// TODO: replace with CreateGenericBuildingElement.
switch (exportType)
{
case IFCExportType.IfcFooting:
slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcCovering:
slabHnd = IFCInstanceExporter.CreateCovering(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcRamp:
slabHnd = IFCInstanceExporter.CreateRamp(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
default:
slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
}
if (!exportParts)
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
IFCAnyHandle type = null;
MaterialLayerSetInfo layersetInfo = null;
if (!ElementFilteringUtil.IsElementVisible(floorElement))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
Document doc = floorElement.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
// For IFC4RV export, Floor will be split into its parts(temporarily) in order to export the floor by its parts
bool exportByComponents = ExporterUtil.ShouldExportByComponents(floorElement, exportParts);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes);
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody;
additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ?
GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
// Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects()
if (exportByComponents)
{
additionalInfo &= ~GenerateAdditionalInfo.GenerateBody;
}
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped,
addInfo: additionalInfo);
if (completelyClipped)
{
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
if (floorAndProperties.Handle != null)
{
representations.Add(floorAndProperties.Handle);
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC);
representations.Add(footprintShapeRep);
}
if (exportByComponents)
{
IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations);
prodReps.Add(prodRep);
}
else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here
{
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
}
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
PotentiallyFixPresentationLayerAssignment(floorElement, prodReps);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
}
}
}
IFCAnyHandle prodDefHnd;
if (prodReps.Count == 0)
{
if (exportByComponents)
{
prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null);
prodReps.Add(prodDefHnd);
}
else
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Deal with a couple of cases that have non-standard defaults.
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcCovering:
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCEntityType.IfcSlab:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory,
localPlacementHnd, exportParts ? null : prodReps[ii]);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (!string.IsNullOrEmpty(ifcName))
{
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName);
}
// Pre IFC4 Slab does not have PredefinedType
if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true);
}
if (exportParts && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
else if (exportByComponents)
{
IFCExtrusionCreationData partECData = new IFCExtrusionCreationData();
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii],
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, out layersetInfo, partECData);
loopExtraParams.Add(partECData);
}
slabHnds.Add(slabHnd);
// For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects()
if (!exportParts && !exportByComponents)
{
if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType);
type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]);
ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects();
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects();
newCreatedObjects.ExceptWith(oldCreatedObjects);
PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects);
}
}
if (!exportParts)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
else
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type);
}
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports an element as IFC railing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element to be exported.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportRailing(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRailing;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
IFCAnyHandle localPlacement = setter.LocalPlacement;
StairRampContainerInfo stairRampInfo = null;
ElementId hostId = GetStairOrRampHostId(exporterIFC, element as Railing);
Transform inverseTrf = Transform.Identity;
if (hostId != ElementId.InvalidElementId)
{
stairRampInfo = ExporterCacheManager.StairRampContainerInfoCache.GetStairRampContainerInfo(hostId);
IFCAnyHandle stairRampLocalPlacement = stairRampInfo.LocalPlacements[0];
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(stairRampLocalPlacement, localPlacement);
inverseTrf = relTrf.Inverse;
IFCAnyHandle railingLocalPlacement = ExporterUtil.CreateLocalPlacement(file, stairRampLocalPlacement,
inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
localPlacement = railingLocalPlacement;
}
ecData.SetLocalPlacement(localPlacement);
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geomElem);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
Railing railingElem = element as Railing;
IList <ElementId> subElementIds = CollectSubElements(railingElem);
foreach (ElementId subElementId in subElementIds)
{
Element subElement = railingElem.Document.GetElement(subElementId);
if (subElement != null)
{
GeometryElement subElementGeom = GeometryUtil.GetOneLevelGeometryElement(subElement.get_Geometry(geomOptions), 0);
SolidMeshGeometryInfo subElementSolidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(subElementGeom);
IList <Solid> subElementSolids = subElementSolidMeshInfo.GetSolids();
IList <Mesh> subElementMeshes = subElementSolidMeshInfo.GetMeshes();
foreach (Solid subElementSolid in subElementSolids)
{
solids.Add(subElementSolid);
}
foreach (Mesh subElementMesh in subElementMeshes)
{
meshes.Add(subElementMesh);
}
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
//bodyExporterOptions.UseGroupsIfPossible = true;
//bodyExporterOptions.UseMappedGeometriesIfPossible = true;
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId, solids, meshes, bodyExporterOptions, ecData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geomElem);
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId, geomlist, bodyExporterOptions, ecData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
if (ecData != null)
{
ecData.ClearOpenings();
}
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IList <GeometryObject> geomObjects = new List <GeometryObject>();
foreach (Solid solid in solids)
{
geomObjects.Add(solid);
}
foreach (Mesh mesh in meshes)
{
geomObjects.Add(mesh);
}
Transform boundingBoxTrf = (bodyData.OffsetTransform != null) ? bodyData.OffsetTransform.Inverse : Transform.Identity;
boundingBoxTrf = inverseTrf.Multiply(boundingBoxTrf);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geomObjects, boundingBoxTrf);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string instanceGUID = GUIDUtil.CreateGUID(element);
//string railingType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType);
IFCAnyHandle railing = IFCInstanceExporter.CreateRailing(exporterIFC, element, instanceGUID, ownerHistory,
ecData.GetLocalPlacement(), prodRep, ifcEnumType);
bool associateToLevel = (hostId == ElementId.InvalidElementId);
productWrapper.AddElement(element, railing, setter, ecData, associateToLevel);
OpeningUtil.CreateOpeningsIfNecessary(railing, element, ecData, bodyData.OffsetTransform,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
CategoryUtil.CreateMaterialAssociation(exporterIFC, railing, bodyData.MaterialIds);
// Create multi-story duplicates of this railing.
if (stairRampInfo != null)
{
stairRampInfo.AddComponent(0, railing);
List <IFCAnyHandle> stairHandles = stairRampInfo.StairOrRampHandles;
for (int ii = 1; ii < stairHandles.Count; ii++)
{
IFCAnyHandle railingLocalPlacement = stairRampInfo.LocalPlacements[ii];
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(railingLocalPlacement))
{
IFCAnyHandle railingHndCopy = CopyRailingHandle(exporterIFC, element, catId, railingLocalPlacement, railing);
stairRampInfo.AddComponent(ii, railingHndCopy);
productWrapper.AddElement(element, railingHndCopy, (IFCLevelInfo)null, ecData, false);
CategoryUtil.CreateMaterialAssociation(exporterIFC, railingHndCopy, bodyData.MaterialIds);
}
}
ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(hostId, stairRampInfo);
}
}
transaction.Commit();
}
}
}
/// <summary>
/// Exports a MEP family instance.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="exportType">The export type of the element.
/// <param name="ifcEnumType">The sub-type of the element.</param></param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if an entity was created, false otherwise.</returns>
public static bool Export(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
IFCExportInfoPair exportType, string ifcEnumType, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// CQ_TODO: Clean up this code by at least factoring it out.
// If we are exporting a duct segment, we may need to split it into parts by level. Create a list of ranges.
IList <ElementId> levels = new List <ElementId>();
IList <IFCRange> ranges = new List <IFCRange>();
// We will not split duct segments if the assemblyId is set, as we would like to keep the original duct segment
// associated with the assembly, on the level of the assembly.
if ((exportType.ExportType == IFCEntityType.IfcDuctSegmentType) &&
(ExporterCacheManager.ExportOptionsCache.WallAndColumnSplitting) &&
(element.AssemblyInstanceId == ElementId.InvalidElementId))
{
LevelUtil.CreateSplitLevelRangesForElement(exporterIFC, exportType, element, out levels,
out ranges);
}
int numPartsToExport = ranges.Count;
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (0 == numPartsToExport)
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
BodyData bodyData = null;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
extraParams.SetLocalPlacement(localPlacementToUse);
IFCAnyHandle productRepresentation =
RepresentationUtil.CreateAppropriateProductDefinitionShape(
exporterIFC, element, catId, geometryElement, bodyExporterOptions, null, extraParams, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
ExportAsMappedItem(exporterIFC, element, file, exportType, ifcEnumType, extraParams,
setter, localPlacementToUse, productRepresentation,
productWrapper);
}
}
}
else
{
for (int ii = 0; ii < numPartsToExport; ii++)
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, levels[ii], overrideContainerHnd))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
SolidMeshGeometryInfo solidMeshCapsule =
GeometryUtil.GetClippedSolidMeshGeometry(geometryElement, ranges[ii]);
IList <Solid> solids = solidMeshCapsule.GetSolids();
IList <Mesh> polyMeshes = solidMeshCapsule.GetMeshes();
IList <GeometryObject> geomObjects =
FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document,
exporterIFC, ref solids, ref polyMeshes);
if (geomObjects.Count == 0 && (solids.Count > 0 || polyMeshes.Count > 0))
{
return(false);
}
bool tryToExportAsExtrusion = (!exporterIFC.ExportAs2x2 ||
(exportType.ExportInstance == IFCEntityType.IfcColumn));
if (exportType.ExportInstance == IFCEntityType.IfcColumn)
{
extraParams.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
}
else
{
extraParams.PossibleExtrusionAxes = IFCExtrusionAxes.TryXYZ;
}
BodyData bodyData = null;
if (geomObjects.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId,
ElementId.InvalidElementId, geomObjects,
bodyExporterOptions, extraParams);
}
else
{
IList <GeometryObject> exportedGeometries = new List <GeometryObject>();
exportedGeometries.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId,
ElementId.InvalidElementId,
exportedGeometries, bodyExporterOptions,
extraParams);
}
List <IFCAnyHandle> bodyReps = new List <IFCAnyHandle>();
bodyReps.Add(bodyData.RepresentationHnd);
IFCAnyHandle productRepresentation =
IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null,
null, bodyReps);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
ExportAsMappedItem(exporterIFC, element, file, exportType, ifcEnumType,
extraParams, setter, localPlacementToUse,
productRepresentation, productWrapper);
}
}
}
}
}
tr.Commit();
}
return(true);
}
/// <summary>
/// Exports a beam to IFC beam.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element to be exported.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportBeam(ExporterIFC exporterIFC,
Element element, GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
double scale = exporterIFC.LinearScale;
using (IFCTransaction transaction = new IFCTransaction(file))
{
LocationCurve locCurve = element.Location as LocationCurve;
Transform orientTrf = Transform.Identity;
bool canExportAxis = (locCurve != null);
IFCAnyHandle axisRep = null;
XYZ beamDirection = null;
XYZ projDir = null;
Curve curve = null;
Plane plane = null;
if (canExportAxis)
{
curve = locCurve.Curve;
if (curve is Line)
{
Line line = curve as Line;
XYZ planeY, planeOrig;
planeOrig = line.get_EndPoint(0);
beamDirection = line.Direction;
if (Math.Abs(beamDirection.Z) < 0.707) // approx 1.0/sqrt(2.0)
{
planeY = XYZ.BasisZ.CrossProduct(beamDirection);
}
else
{
planeY = XYZ.BasisX.CrossProduct(beamDirection);
}
planeY = planeY.Normalize();
projDir = beamDirection.CrossProduct(planeY);
plane = new Plane(beamDirection, planeY, planeOrig);
orientTrf.BasisX = beamDirection; orientTrf.BasisY = planeY; orientTrf.BasisZ = projDir; orientTrf.Origin = planeOrig;
}
else if (curve is Arc)
{
XYZ yDir, center;
Arc arc = curve as Arc;
beamDirection = arc.XDirection; yDir = arc.YDirection; projDir = arc.Normal; center = arc.Center;
plane = new Plane(beamDirection, yDir, center);
orientTrf.BasisX = beamDirection; orientTrf.BasisY = yDir; orientTrf.BasisZ = projDir; orientTrf.Origin = center;
}
else
{
canExportAxis = false;
}
}
using (IFCPlacementSetter setter = IFCPlacementSetter.Create(exporterIFC, element, null, canExportAxis ? orientTrf : null, ExporterUtil.GetBaseLevelIdForElement(element)))
{
IFCAnyHandle localPlacement = setter.GetPlacement();
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(localPlacement);
if (canExportAxis && (orientTrf.BasisX != null))
{
extrusionCreationData.CustomAxis = beamDirection;
extrusionCreationData.PossibleExtrusionAxes = IFCExtrusionAxes.TryCustom;
}
else
{
extrusionCreationData.PossibleExtrusionAxes = IFCExtrusionAxes.TryXY;
}
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
// The representation handle generated from one of the methods below.
IFCAnyHandle repHnd = null;
// The list of materials in the solids or meshes.
ICollection <ElementId> materialIds = new HashSet <ElementId>();
// There may be an offset to make the local coordinate system
// be near the origin. This offset will be used to move the axis to the new LCS.
Transform offsetTransform = null;
// If we have a beam with a Linear location line that only has one solid geometry,
// we will try to use the ExtrusionAnalyzer to generate an extrusion with 0 or more clippings.
// This code is currently limited in that it will not process beams with openings, so we
// use other methods below if this one fails.
if (solids.Count == 1 && meshes.Count == 0 && (canExportAxis && (curve is Line)))
{
bool completelyClipped;
beamDirection = orientTrf.BasisX;
Plane beamExtrusionPlane = new Plane(orientTrf.BasisY, orientTrf.BasisZ, orientTrf.Origin);
repHnd = ExtrusionExporter.CreateExtrusionWithClipping(exporterIFC, element,
catId, solids[0], beamExtrusionPlane, beamDirection, null, out completelyClipped);
if (completelyClipped)
{
return;
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(repHnd))
{
// This is used by the BeamSlopeCalculator. This should probably be generated automatically by
// CreateExtrusionWithClipping.
IFCExtrusionBasis bestAxis = (Math.Abs(beamDirection[0]) > Math.Abs(beamDirection[1])) ?
IFCExtrusionBasis.BasisX : IFCExtrusionBasis.BasisY;
extrusionCreationData.Slope = GeometryUtil.GetSimpleExtrusionSlope(beamDirection, bestAxis);
ElementId materialId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(solids[0], exporterIFC, element);
if (materialId != ElementId.InvalidElementId)
{
materialIds.Add(materialId);
}
}
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(repHnd))
{
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId,
solids, meshes, bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId,
geomlist, bodyExporterOptions, extrusionCreationData);
}
repHnd = bodyData.RepresentationHnd;
materialIds = bodyData.MaterialIds;
offsetTransform = bodyData.OffsetTransform;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(repHnd))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
if (canExportAxis)
{
XYZ curveOffset = new XYZ(0, 0, 0);
if (offsetTransform != null)
{
curveOffset = -offsetTransform.Origin / scale;
}
else
{
// Note that we do not have to have any scaling adjustment here, since the curve origin is in the
// same internal coordinate system as the curve.
curveOffset = -plane.Origin;
}
Plane offsetPlane = new Plane(plane.XVec, plane.YVec, XYZ.Zero);
IFCGeometryInfo info = IFCGeometryInfo.CreateCurveGeometryInfo(exporterIFC, offsetPlane, projDir, false);
ExporterIFCUtils.CollectGeometryInfo(exporterIFC, info, curve, curveOffset, true);
IList <IFCAnyHandle> axis_items = info.GetCurves();
if (axis_items.Count > 0)
{
string identifierOpt = "Axis"; // this is by IFC2x2 convention, not temporary
string representationTypeOpt = "Curve2D"; // this is by IFC2x2 convention, not temporary
axisRep = RepresentationUtil.CreateShapeRepresentation(exporterIFC, element, catId, exporterIFC.Get3DContextHandle(identifierOpt),
identifierOpt, representationTypeOpt, axis_items);
representations.Add(axisRep);
}
}
representations.Add(repHnd);
Transform boundingBoxTrf = (offsetTransform == null) ? Transform.Identity : offsetTransform.Inverse;
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, boundingBoxTrf);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
string instanceGUID = GUIDUtil.CreateGUID(element);
string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, NamingUtil.CreateIFCObjectName(exporterIFC, element));
string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
IFCAnyHandle beam = IFCInstanceExporter.CreateBeam(file, instanceGUID, exporterIFC.GetOwnerHistoryHandle(),
instanceName, instanceDescription, instanceObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, instanceTag);
productWrapper.AddElement(element, beam, setter, extrusionCreationData, true);
OpeningUtil.CreateOpeningsIfNecessary(beam, element, extrusionCreationData, offsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), setter, productWrapper);
FamilyTypeInfo typeInfo = new FamilyTypeInfo();
typeInfo.ScaledDepth = extrusionCreationData.ScaledLength;
typeInfo.ScaledArea = extrusionCreationData.ScaledArea;
typeInfo.ScaledInnerPerimeter = extrusionCreationData.ScaledInnerPerimeter;
typeInfo.ScaledOuterPerimeter = extrusionCreationData.ScaledOuterPerimeter;
PropertyUtil.CreateBeamColumnBaseQuantities(exporterIFC, beam, element, typeInfo);
if (materialIds.Count != 0)
{
CategoryUtil.CreateMaterialAssociations(exporterIFC, beam, materialIds);
}
// Register the beam's IFC handle for later use by truss and beam system export.
ExporterCacheManager.ElementToHandleCache.Register(element.Id, beam);
}
}
transaction.Commit();
}
}
/// <summary>
/// Exports a floor to IFC slab.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="floor">
/// The floor element.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="ifcEnumType">
/// The string value represents the IFC type.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
/// <param name="exportParts">
/// Whether to export parts or not.
/// </param>
/// <returns>
/// True if the floor is exported successfully, false otherwise.
/// </returns>
public static void ExportFloor(ExporterIFC exporterIFC, Element floorElement, GeometryElement geometryElement, string ifcEnumType,
ProductWrapper productWrapper, bool exportParts)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (IFCPlacementSetter placementSetter = IFCPlacementSetter.Create(exporterIFC, floorElement, null, null, ExporterUtil.GetBaseLevelIdForElement(floorElement)))
{
IFCAnyHandle localPlacement = placementSetter.GetPlacement();
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
bool exportedAsInternalExtrusion = false;
double scale = exporterIFC.LinearScale;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (!exportParts)
{
// First, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
if (floorElement is Floor)
{
Floor floor = floorElement as Floor;
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go thruough te Revit model orgigin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floor.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorPlane = new Plane(floorDir, floorOrigin);
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floor,
catId, solids[0], extrusionAnalyzerFloorPlane, floorExtrusionDirection, null, out completelyClipped);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
repTypes.Add(ShapeRepresentationType.SweptSolid);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
}
if (prodReps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
bodyExporterOptions.TessellationLevel = BodyExporter.GetTessellationLevel();
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Allow export as IfcSlab or IfcFooting. Ignore altIfcEnumType value; use value passed in.
string altIfcEnumType;
IFCExportType exportAs = ExporterUtil.GetExportType(exporterIFC, floorElement, out altIfcEnumType);
bool exportAsFooting = (exportAs == IFCExportType.ExportFooting);
IFCFootingType?footingType = null;
IFCSlabType? slabType = null;
if (exportAsFooting)
{
footingType = FootingExporter.GetIFCFootingType(ifcEnumType);
}
else
{
slabType = GetIFCSlabType(ifcEnumType);
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
if (exportAsFooting)
{
slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, footingType.Value);
}
else
{
slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, slabType.Value);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
}
if (!exportParts)
{
if (floorElement is HostObject)
{
HostObject hostObject = floorElement as HostObject;
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
else if (floorElement is FamilyInstance && slabHnds.Count > 0)
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, floorElement);
Document doc = floorElement.Document;
foreach (IFCAnyHandle slabHnd in slabHnds)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId);
}
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports a floor to IFC slab.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="floor">
/// The floor element.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="ifcEnumType">
/// The string value represents the IFC type.
/// </param>
/// <param name="productWrapper">
/// The IFCProductWrapper.
/// </param>
/// <param name="exportParts">
/// Whether to export parts or not.
/// </param>
/// <returns>
/// True if the floor is exported successfully, false otherwise.
/// </returns>
public static void ExportFloor(ExporterIFC exporterIFC, Element floorElement, GeometryElement geometryElement, string ifcEnumType,
IFCProductWrapper productWrapper, bool exportParts)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (IFCPlacementSetter placementSetter = IFCPlacementSetter.Create(exporterIFC, floorElement))
{
IFCAnyHandle localPlacement = placementSetter.GetPlacement();
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
bool exportedAsInternalExtrusion = false;
double scale = exporterIFC.LinearScale;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (!exportParts)
{
// First, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
if (floorElement is Floor)
{
Floor floor = floorElement as Floor;
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSolidMeshGeometry(geometryElement, Transform.Identity);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
IList <Solid> splitVolumes = SolidUtils.SplitVolumes(solids[0]);
if (splitVolumes.Count == 1)
{
bool completelyClipped;
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go thruough te Revit model orgigin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floor.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorPlane = new Plane(floorDir, floorOrigin);
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floor,
catId, solids[0], extrusionAnalyzerFloorPlane, floorExtrusionDirection, null, out completelyClipped);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
reps.Add(prodRep);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (reps.Count == 0)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out reps,
out extrusionLoops, out loopExtraParams, floorPlane);
}
if (reps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
bodyExporterOptions.TessellationLevel = BodyExporterOptions.BodyTessellationLevel.Coarse;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateBRepProductDefinitionShape(floorElement.Document.Application, exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
reps.Add(prodDefHnd);
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = ExporterIFCUtils.CreateGUID(floorElement);
int numReps = exportParts ? 1 : reps.Count;
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.CreateIFCName(exporterIFC, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcElemId = NamingUtil.CreateIFCElementId(floorElement);
string currentGUID = (ii == 0) ? ifcGUID : ExporterIFCUtils.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCSlabType slabType = GetIFCSlabType(ifcEnumType);
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : reps[ii], ifcElemId, slabType);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
}
bool associateElementToLevel = LevelUtil.AssociateElementToLevel(floorElement);
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(slabHnds[ii], placementSetter, loopExtraParam, associateElementToLevel);
}
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper);
}
PropertyUtil.CreateInternalRevitPropertySets(exporterIFC, floorElement, productWrapper);
}
if (!exportParts)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement as HostObject, slabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3);
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, ifcEnumType, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = ExporterCacheManager.ExportOptionsCache.ExportAs4 ? GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped,
addInfo: additionalInfo);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
if (!(IFCAnyHandleUtil.IsNullOrHasNoValue(floorAndProperties.FootprintInfo.FootPrintHandle)))
{
representations.Add(floorAndProperties.FootprintInfo.FootPrintHandle);
}
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
repTypes.Add(ShapeRepresentationType.SweptSolid);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion)
{
//IList<IFCAnyHandle> prodRepsTmp = new List<IFCAnyHandle>();
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
// Get back the representations, we need to add the Footprint to it
//IList<IFCAnyHandle> representations = IFCAnyHandleUtil.GetRepresentations(prodRepsTmp[ii]);
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
//representations.Add(footprintShapeRepresentation);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
//IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
//prodReps.Add(prodRep);
}
else
{
//prodReps.Add(prodRepsTmp[ii]);
}
// We do not need the prodRepsTmp anymore, delete the handle:
//prodRepsTmp[ii].Delete();
}
}
if (prodReps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
string entityType = null;
switch (exportType)
{
case IFCExportType.IfcFooting:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCFootingType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCFootingType>(floorElement, ifcEnumType, null);
}
break;
case IFCExportType.IfcCovering:
entityType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCExportType.IfcRamp:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCRampType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCRampType>(floorElement, ifcEnumType, null);
}
break;
default:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
// TODO: replace with CreateGenericBuildingElement.
switch (exportType)
{
case IFCExportType.IfcFooting:
slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcCovering:
slabHnd = IFCInstanceExporter.CreateCovering(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcRamp:
slabHnd = IFCInstanceExporter.CreateRamp(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
default:
//if ((canExportAsInternalExtrusion || exportedAsInternalExtrusion) && ExporterCacheManager.ExportOptionsCache.ExportAs4)
//{
// slabHnd = IFCInstanceExporter.CreateSlabStandardCase(file, currentGUID, ownerHistory, ifcName,
// ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
// ifcTag, entityType);
//}
//else
slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
//// For now we have to be content without IfcOpeningStandardCase from the openings created by this native call because it is too much to
//// "reverse engineer" the IFChandle
//foreach (IFCAnyHandle slabHandle in slabHnds)
//{
// updateOpeningProfileRep(exporterIFC, slabHandle);
//}
}
if (!exportParts)
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports an element as IFC railing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element to be exported.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="productWrapper">
/// The IFCProductWrapper.
/// </param>
public static void ExportRailing(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, IFCProductWrapper productWrapper)
{
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (IFCPlacementSetter setter = IFCPlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.GetPlacement());
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSolidMeshGeometry(geomElem, Transform.Identity);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
Railing railingElem = element as Railing;
IList <ElementId> subElementIds = CollectSubElements(railingElem);
foreach (ElementId subElementId in subElementIds)
{
Element subElement = railingElem.Document.GetElement(subElementId);
if (subElement != null)
{
GeometryElement subElementGeom = GeometryUtil.GetOneLevelGeometryElement(subElement.get_Geometry(geomOptions));
SolidMeshGeometryInfo subElementSolidMeshInfo = GeometryUtil.GetSolidMeshGeometry(subElementGeom, Transform.Identity);
IList <Solid> subElementSolids = subElementSolidMeshInfo.GetSolids();
IList <Mesh> subElementMeshes = subElementSolidMeshInfo.GetMeshes();
foreach (Solid subElementSolid in subElementSolids)
{
solids.Add(subElementSolid);
}
foreach (Mesh subElementMesh in subElementMeshes)
{
meshes.Add(subElementMesh);
}
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
//bodyExporterOptions.UseGroupsIfPossible = true;
//bodyExporterOptions.UseMappedGeometriesIfPossible = true;
bodyExporterOptions.TessellationLevel = BodyExporterOptions.BodyTessellationLevel.Coarse;
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(element.Document.Application, exporterIFC, element, catId, solids, meshes, bodyExporterOptions, ecData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geomElem);
bodyData = BodyExporter.ExportBody(element.Document.Application, exporterIFC, element, catId, geomlist, bodyExporterOptions, ecData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
if (ecData != null)
{
ecData.ClearOpenings();
}
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string instanceGUID = ExporterIFCUtils.CreateGUID(element);
string origInstanceName = exporterIFC.GetName();
string instanceName = NamingUtil.GetNameOverride(element, origInstanceName);
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string instanceElemId = NamingUtil.CreateIFCElementId(element);
Toolkit.IFCRailingType railingType = GetIFCRailingType(element, ifcEnumType);
IFCAnyHandle railing = IFCInstanceExporter.CreateRailing(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, ecData.GetLocalPlacement(),
prodRep, instanceElemId, railingType);
ElementId hostId = GetStairOrRampHostId(exporterIFC, element as Railing);
bool associateToLevel = (hostId == ElementId.InvalidElementId) && LevelUtil.AssociateElementToLevel(element);
productWrapper.AddElement(railing, setter, ecData, associateToLevel);
OpeningUtil.CreateOpeningsIfNecessary(railing, element, ecData, exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
CategoryUtil.CreateMaterialAssociations(element.Document, exporterIFC, railing, bodyData.MaterialIds);
// Create multi-story duplicates of this railing.
if (hostId != ElementId.InvalidElementId)
{
StairRampContainerInfo stairRampInfo = ExporterCacheManager.StairRampContainerInfoCache.GetStairRampContainerInfo(hostId);
stairRampInfo.AddComponent(0, railing);
List <IFCAnyHandle> stairHandles = stairRampInfo.StairOrRampHandles;
for (int ii = 1; ii < stairHandles.Count; ii++)
{
IFCAnyHandle railingLocalPlacement = stairRampInfo.LocalPlacements[ii];
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(railingLocalPlacement))
{
IFCAnyHandle railingHndCopy = CopyRailingHandle(exporterIFC, element, catId, railingLocalPlacement, railing);
stairRampInfo.AddComponent(ii, railingHndCopy);
productWrapper.AddElement(railingHndCopy, (IFCLevelInfo)null, ecData, false);
CategoryUtil.CreateMaterialAssociations(element.Document, exporterIFC, railingHndCopy, bodyData.MaterialIds);
}
}
ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(hostId, stairRampInfo);
}
PropertyUtil.CreateInternalRevitPropertySets(exporterIFC, element, productWrapper);
}
transaction.Commit();
}
}
}
/// <summary>
/// Exports an element as IFC railing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element to be exported.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportRailing(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRailing;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
using (IFCTransaction transaction = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
IFCAnyHandle localPlacement = setter.LocalPlacement;
StairRampContainerInfo stairRampInfo = null;
ElementId hostId = GetStairOrRampHostId(exporterIFC, element as Railing);
Transform inverseTrf = Transform.Identity;
if (hostId != ElementId.InvalidElementId)
{
stairRampInfo = ExporterCacheManager.StairRampContainerInfoCache.GetStairRampContainerInfo(hostId);
IFCAnyHandle stairRampLocalPlacement = stairRampInfo.LocalPlacements[0];
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(stairRampLocalPlacement, localPlacement);
inverseTrf = relTrf.Inverse;
IFCAnyHandle railingLocalPlacement = ExporterUtil.CreateLocalPlacement(file, stairRampLocalPlacement,
inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
localPlacement = railingLocalPlacement;
}
ecData.SetLocalPlacement(localPlacement);
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geomElem);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document, exporterIFC, ref solids, ref meshes);
Railing railingElem = element as Railing;
IList <ElementId> subElementIds = CollectSubElements(railingElem);
foreach (ElementId subElementId in subElementIds)
{
Element subElement = railingElem.Document.GetElement(subElementId);
if (subElement != null)
{
GeometryElement allLevelsGeometry = subElement.get_Geometry(geomOptions);
var oneLevelGeom = GeometryUtil.GetOneLevelGeometryElement(allLevelsGeometry, 0);
GeometryElement subElementGeom = oneLevelGeom.element;
// Get rail terminations geometry
List <GeometryElement> overallGeometry = GeometryUtil.GetAdditionalOneLevelGeometry(allLevelsGeometry, oneLevelGeom.symbolId);
overallGeometry.Add(subElementGeom);
foreach (GeometryElement subGeomentry in overallGeometry)
{
SolidMeshGeometryInfo subElementSolidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(subGeomentry);
IList <Solid> subElemSolids = subElementSolidMeshInfo.GetSolids();
IList <Mesh> subElemMeshes = subElementSolidMeshInfo.GetMeshes();
IList <GeometryObject> partGObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document, exporterIFC, ref subElemSolids, ref subElemMeshes);
foreach (Solid subElSolid in subElemSolids)
{
solids.Add(subElSolid);
}
foreach (Mesh subElMesh in subElemMeshes)
{
meshes.Add(subElMesh);
}
}
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId, solids, meshes, bodyExporterOptions, ecData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geomElem);
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId, geomlist, bodyExporterOptions, ecData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
if (ecData != null)
{
ecData.ClearOpenings();
}
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IList <GeometryObject> geomObjects = new List <GeometryObject>(solids);
foreach (Mesh mesh in meshes)
{
geomObjects.Add(mesh);
}
Transform boundingBoxTrf = (bodyData.OffsetTransform != null) ? bodyData.OffsetTransform.Inverse : Transform.Identity;
boundingBoxTrf = inverseTrf.Multiply(boundingBoxTrf);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geomObjects, boundingBoxTrf);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string instanceGUID = GUIDUtil.CreateGUID(element);
IFCExportInfoPair exportInfo = ExporterUtil.GetProductExportType(exporterIFC, element, out ifcEnumType);
IFCAnyHandle railing = IFCInstanceExporter.CreateGenericIFCEntity(exportInfo, exporterIFC, element, instanceGUID, ownerHistory,
ecData.GetLocalPlacement(), prodRep);
bool associateToLevel = (hostId == ElementId.InvalidElementId);
productWrapper.AddElement(element, railing, setter, ecData, associateToLevel, exportInfo);
OpeningUtil.CreateOpeningsIfNecessary(railing, element, ecData, bodyData.OffsetTransform,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
IFCAnyHandle singleMaterialOverrideHnd = null;
IList <ElementId> matIds = null;
ElementId defaultMatId = ElementId.InvalidElementId;
ElementId matId = CategoryUtil.GetBaseMaterialIdForElement(element);
// Get IfcSingleMaterialOverride to work for railing
singleMaterialOverrideHnd = ExporterUtil.GetSingleMaterial(exporterIFC, element, matId);
if (singleMaterialOverrideHnd != null)
{
matIds = new List <ElementId> {
matId
};
}
else
{
matIds = bodyData.MaterialIds;
defaultMatId = matIds[0];
// Check if all the items are the same, then get the first material id
if (matIds.All(x => x == defaultMatId))
{
matIds = new List <ElementId> {
defaultMatId
};
}
}
CategoryUtil.CreateMaterialAssociationWithShapeAspect(exporterIFC, element, railing, bodyData.RepresentationItemInfo);
// Create multi-story duplicates of this railing.
if (stairRampInfo != null)
{
stairRampInfo.AddComponent(0, railing);
List <IFCAnyHandle> stairHandles = stairRampInfo.StairOrRampHandles;
int levelCount = stairHandles.Count;
if (levelCount > 0 && railingElem != null)
{
Stairs stairs = railingElem.Document.GetElement(railingElem.HostId) as Stairs;
if ((stairs?.MultistoryStairsId ?? ElementId.InvalidElementId) != ElementId.InvalidElementId)
{
// If the railing is hosted by stairs, don't use stairHandles.Count,
// use ids (count) of levels the railing is placed on.
ISet <ElementId> multistoryStairsPlacementLevels = railingElem.GetMultistoryStairsPlacementLevels();
if (multistoryStairsPlacementLevels != null)
{
levelCount = multistoryStairsPlacementLevels.Count;
}
}
}
for (int ii = 1; ii < levelCount; ii++)
{
IFCAnyHandle railingLocalPlacement = stairRampInfo.LocalPlacements[ii];
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(railingLocalPlacement))
{
IFCAnyHandle railingHndCopy = CopyRailingHandle(exporterIFC, element, catId,
railingLocalPlacement, railing, ii);
stairRampInfo.AddComponent(ii, railingHndCopy);
productWrapper.AddElement(element, railingHndCopy, (IFCLevelInfo)null, ecData, false, exportInfo);
CategoryUtil.CreateMaterialAssociationWithShapeAspect(exporterIFC, element, railingHndCopy, bodyData.RepresentationItemInfo);
}
}
ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(hostId, stairRampInfo);
}
}
transaction.Commit();
}
}
}