public CutOp(Inventor.Document newDoc)
{
if (newDoc.DocumentType == DocumentTypeEnum.kAssemblyDocumentObject)
{
m_PartDoc = (PartDocument)newDoc.ActivatedObject;
}
if (newDoc.DocumentType == DocumentTypeEnum.kPartDocumentObject)
{
m_PartDoc = (PartDocument)newDoc;
}
if (m_PartDoc.SubType == "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}")
{
smcd = (SheetMetalComponentDefinition)m_PartDoc.ComponentDefinition;
}
smf = (SheetMetalFeatures)smcd.Features;
CutDefinition cd = smf.CutFeatures.CreateCutDefinition(selectFromSketch());
try
{ cd.SetCutAcrossBendsExtent("Толщина"); }
catch (Exception)
{
cd.SetCutAcrossBendsExtent("Thickness");
}
smf.CutFeatures.Add(cd);
}
public static List <string> ExportSheetmetalPartsToDXF(List <SheetmetalPart> sheetmetalPartList, ExportDXFSettings exportDXFSettings)
{
List <string> exportLog = new List <string>();
string exportString = ExportStringGenerator.GenerateExportString(exportDXFSettings.ImportExportDXFLayers.dXFLayerItems);
foreach (SheetmetalPart sheetmetalPart in sheetmetalPartList)
{
string exportFileName = GenerateExportFileName(sheetmetalPart, exportDXFSettings);
try
{
SheetMetalComponentDefinition sheetMetalCompDef = (SheetMetalComponentDefinition)sheetmetalPart.PartDocument.ComponentDefinition;
DataIO dataIO = sheetMetalCompDef.FlatPattern.DataIO;
dataIO.WriteDataToFile(exportString, exportFileName);
exportLog.Add(sheetmetalPart.Name + " DXF was successfully exported");
EventLogger.CreateLogEntry(sheetmetalPart.Name + " DXF was successfully exported");
}
catch (Exception e)
{
exportLog.Add(sheetmetalPart.Name + " DXF export encountered an error");
exportLog.Add(e.Message + " " + e.StackTrace);
EventLogger.CreateLogEntry(sheetmetalPart.Name + " DXF export encountered an error");
EventLogger.CreateLogEntry(e.Message + " " + e.StackTrace);
continue;
}
}
return(exportLog);
}
public static void createCutLavorazione(PartDocument oDoc, List <string> nomeSketch)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
foreach (string nameS in nomeSketch)
{
try
{
PlanarSketch oSketch = oCompDef.Sketches[nameS];
SheetMetalFeatures oSheetMetalFeatures = (SheetMetalFeatures)oCompDef.Features;
Profile oProfile = oSketch.Profiles.AddForSolid();
CutDefinition oCutDefinition = oSheetMetalFeatures.CutFeatures.CreateCutDefinition(oProfile);
//oCutDefinition.SetThroughAllExtent(PartFeatureExtentDirectionEnum.kNegativeExtentDirection);
CutFeature oCutFeature = oSheetMetalFeatures.CutFeatures.Add(oCutDefinition);
}
catch
{
throw new Exception("Nome sketch non esiste: " + nameS);
}
}
}
static public void addCutDef(SheetMetalComponentDefinition smcd, Double a, Double b, string name = "Паз")
{
try
{
SketchBlockDefinition d = smcd.SketchBlockDefinitions[name];
return;
}
catch (Exception)
{
}
SketchBlockDefinition def = smcd.SketchBlockDefinitions.Add(name);
TransientGeometry tg = Macros.StandardAddInServer.m_inventorApplication.TransientGeometry;
Point2d pt = tg.CreatePoint2d();
SketchPoint origin = def.SketchPoints.Add(pt, false);
def.GeometricConstraints.AddGround((SketchEntity)origin);
SketchLine sl1, sl2, sl3;
SketchEntitiesEnumerator en = def.SketchLines.AddAsTwoPointRectangle(tg.CreatePoint2d(-b / 2, -a / 2), tg.CreatePoint2d(b / 2, a / 2));
sl1 = (SketchLine)en[2]; sl2 = (SketchLine)en[4];
sl3 = midleLine(sl1, sl2);
//foreach (DimensionConstraint item in def.DimensionConstraints)
//{
// item.Delete();
//}
}
bool check(SheetMetalComponentDefinition smcd1)
{
if (xDoc == null)
{
return(false);
}
if (smcd1 == null)
{
return(false);
}
double t = u.convToDouble(smcd1.Thickness.Value.ToString(), 10, 3);
string matName = smcd1.Material.Name;
XElement el = xDoc.Root.Descendants("Material").FirstOrDefault(e => e.FirstAttribute.Value == matName);
if (el == null)
{
return(false);
}
//el.Element("MaterialUpLine").Value = el.Element("MaterialUpLine").Value.Replace("t", t.ToString("0.0", System.Globalization.CultureInfo.CreateSpecificCulture("da-DK")));
List <string> vals = new List <string>()
{
el.Element("MaterialUpLine").Value.Replace("t", t.ToString("0.0", System.Globalization.CultureInfo.CreateSpecificCulture("da-DK"))), el.Element("MaterialDownLine").Value, el.Element("MaterialLine").Value, el.Element("MaterialCenter").Value
};
if (base[0] != null)
{
changed = changes(vals, 3);
}
return(changed);
}
public static IDictionary <Face, List <Lavorazione> > detectLavorazioni(PartDocument oDoc)
{
IDictionary <Face, List <Lavorazione> > result = new Dictionary <Face, List <Lavorazione> >();
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
FaceCollection oFaceColl = oCompDef.Bends[1].FrontFaces[1].TangentiallyConnectedFaces;
oFaceColl.Add(oCompDef.Bends[1].FrontFaces[1]);
foreach (Face f in oFaceColl)
{
if (f.EdgeLoops.Count > 1)
{
List <Lavorazione> lavorazione = IdentificazioneEntita.main(f.EdgeLoops, iApp);
if (lavorazione.Count > 0)
{
result.Add(f, lavorazione);
}
}
}
return(result);
}
public static List <string> createSketchLavorazione(PartDocument oDoc, IDictionary <Face, List <Lavorazione> > lavorazione)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
List <string> result = new List <string>();
int index = 1;
foreach (var x in lavorazione)
{
Face oFace = x.Key;
List <Lavorazione> lavList = x.Value;
foreach (Lavorazione lav in lavList)
{
PlanarSketch oSketch = oCompDef.Sketches.Add(oFace, false);
foreach (Edge oEdge in lav.oEdgeColl_)
{
oSketch.AddByProjectingEntity(oEdge);
oSketch.Visible = false;
}
string nameSketch = lav.nameLav_ + "_" + index;
oSketch.Name = nameSketch;
result.Add(nameSketch);
index++;
}
}
return(result);
}
public static void createFillet(PartDocument oDoc)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
SheetMetalFeatures sFeatures = (SheetMetalFeatures)oCompDef.Features;
foreach (Edge oEdge in oCompDef.SurfaceBodies[1].ConcaveEdges)
{
int tmpCount = oCompDef.SurfaceBodies[1].ConcaveEdges.Count;
coloroEntita(oDoc, 255, 0, 0, oEdge);
try
{
EdgeCollection oBendEdges = iApp.TransientObjects.CreateEdgeCollection();
oBendEdges.Add(oEdge);
BendDefinition oBendDef = sFeatures.BendFeatures.CreateBendDefinition(oBendEdges);
BendFeature oBendFeature = sFeatures.BendFeatures.Add(oBendDef);
//if (tmpCount != oCompDef.SurfaceBodies[1].ConcaveEdges.Count)
//{
createFillet(oDoc);
break;
//}
}
catch { }
}
}
static public void project(SheetMetalComponentDefinition smcd, string name)
{
WorkPlane wp = smcd.WorkPlanes["Шип_справа"];
PlanarSketch ps = smcd.Sketches.Add(wp);
ps.Name = name; ps.Visible = false;
ps.ProjectedCuts.Add();
}
// ! Setta la texture
public static void setTexture(PartDocument oDoc)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
FaceCollection fcFront = oCompDef.Bends[1].FrontFaces[1].TangentiallyConnectedFaces;
fcFront.Add(oCompDef.Bends[1].FrontFaces[1]);
FaceCollection fcBack = oCompDef.Bends[1].BackFaces[1].TangentiallyConnectedFaces;
fcBack.Add(oCompDef.Bends[1].BackFaces[1]);
double area0 = 0;
foreach (Face oFace in fcFront)
{
area0 = area0 + oFace.Evaluator.Area;
}
double area1 = 0;
foreach (Face oFace in fcBack)
{
area1 = area1 + oFace.Evaluator.Area;
}
Asset oAsset;
try
{
oAsset = oDoc.Assets["RawSide"];
}
catch (System.ArgumentException e)
{
Assets oAssets = oDoc.Assets;
AssetLibrary oAssetsLib = iApp.AssetLibraries["3D_Pisa_Col"];
Asset oAssetLib = oAssetsLib.AppearanceAssets["RawSide"];
oAsset = oAssetLib.CopyTo(oDoc);
}
FaceCollection fc;
if (area0 > area1)
{
fc = fcBack;
}
else
{
fc = fcFront;
}
foreach (Face f in fc)
{
f.Appearance = oAsset;
}
}
static public MirrorFeature addMirror(SheetMetalComponentDefinition smcd, ObjectCollection objs, string name, UnitVector vec)
{
SheetMetalFeatures smf = (SheetMetalFeatures)smcd.Features;
WorkPlane wp = smcd.WorkPlanes.OfType <WorkPlane>().First(e => InvDoc.u.eq(vec, e.Plane.Normal));
MirrorFeature mir = smf.MirrorFeatures.Add(objs, wp, false, PatternComputeTypeEnum.kAdjustToModelCompute);
mir.Name = name;
return(mir);
}
public FeaturesInv() : base(entTypes.Features)
{
if (doc.SubType == "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}")
{
def = doc.ComponentDefinition as SheetMetalComponentDefinition;
smf = def.Features as SheetMetalFeatures;
thick = def.Thickness;
sms = def.SheetMetalStyles;
}
}
static public FlatPattern getFP(Document doc)
{
SheetMetalComponentDefinition smcd = getSMCD(doc);
if (smcd != null && smcd.HasFlatPattern)
{
return(smcd.FlatPattern);
}
return(null);
}
// ! Aggiunge il piano in mezzo alla lamiera
public static WorkPlane addPlaneInTheMiddleOfBox(PartDocument oDoc)
{
SheetMetalComponentDefinition oComp = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
try
{
return(oComp.WorkPlanes["Manual"]);
}
catch { }
Box oRb = oComp.SurfaceBodies[1].RangeBox;
TransientBRep oTransientBRep = iApp.TransientBRep;
SurfaceBody oBody = oTransientBRep.CreateSolidBlock(oRb);
NonParametricBaseFeature oBaseFeature = oComp.Features.NonParametricBaseFeatures.Add(oBody);
FaceCollection oFaceColl = iApp.TransientObjects.CreateFaceCollection();
foreach (Face f in oBaseFeature.SurfaceBodies[1].Faces)
{
WorkPlane tmpWp = oComp.WorkPlanes.AddByPlaneAndOffset(f, 0);
//if (tmpWp.Plane.IsParallelTo[oComp.WorkPlanes[1].Plane])
if (tmpWp.Plane.IsParallelTo[oComp.WorkPlanes[1].Plane])
{
oFaceColl.Add(f);
}
tmpWp.Delete();
}
WorkPlane wpWork = null;
if (oFaceColl.Count >= 2)
{
WorkPlane wp1 = oComp.WorkPlanes.AddByPlaneAndOffset(oFaceColl[1], 0);
WorkPlane wp2 = oComp.WorkPlanes.AddByPlaneAndOffset(oFaceColl[2], 0);
wpWork = oComp.WorkPlanes.AddByTwoPlanes(wp1, wp2);
wpWork.Name = "wpWorkReference";
wpWork.Grounded = true;
wpWork.Visible = false;
oBaseFeature.Delete(false, true, true);
wp1.Delete();
wp2.Delete();
}
return(wpWork);
}
public SheetmetalPart(PartDocument partDocument) : base(partDocument)
{
SheetMetalCompDef = (SheetMetalComponentDefinition)partDocument.ComponentDefinition;
NumberOfBends = SheetMetalCompDef.Bends.Count;
Thickness = SheetMetalCompDef.Thickness.ModelValue;
FlatPattern = new FlatPattern(SheetMetalCompDef);
GetFlatPatternProperties();
}
// ! Elimina tutti i fillet
public static List <string> deleteFillet_(PartDocument oDoc)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
List <string> faceCollToKeep = new List <string>();
if (oCompDef.Bends.Count > 0)
{
Bend oBend = oCompDef.Bends[1];
FaceCollection oFaceColl = oBend.FrontFaces[1].TangentiallyConnectedFaces;
oFaceColl.Add(oBend.FrontFaces[1]);
foreach (Face oFace in oFaceColl)
{
faceCollToKeep.Add(oFace.InternalName);
}
NonParametricBaseFeature oBaseFeature = oCompDef.Features.NonParametricBaseFeatures[1];
oBaseFeature.Edit();
SurfaceBody basebody = oBaseFeature.BaseSolidBody;
ObjectCollection oColl = iApp.TransientObjects.CreateObjectCollection();
foreach (Face f in basebody.Faces)
{
if (faceCollToKeep.Contains(f.InternalName))
{
if (f.SurfaceType == SurfaceTypeEnum.kCylinderSurface)
{
oColl.Add(f);
}
}
}
try
{
oBaseFeature.DeleteFaces(oColl);
oBaseFeature.ExitEdit();
}
catch
{
oBaseFeature.ExitEdit();
return(null);
}
}
return(faceCollToKeep);
}
public void addProject()
{
try
{
m_asmCompDef = asmDoc.ComponentDefinition;
invApp = (Inventor.Application)asmDoc.Parent;
tg = invApp.TransientGeometry;
smcd = (SheetMetalComponentDefinition)m_asmCompDef.Occurrences[1].Definition;
SheetMetalComponentDefinition smcd2 = (SheetMetalComponentDefinition)m_asmCompDef.Occurrences[2].Definition;
//m_asmCompDef.Occurrences[1].Edit();
CommandManager cmdMgr = ((Inventor.Application)asmDoc.Parent).CommandManager;
FaceProxy face;
object obj = cmdMgr.Pick(SelectionFilterEnum.kPartFacePlanarFilter, "Выберите плоскость эскиза:");
objCol = invApp.TransientObjects.CreateObjectCollection();
face = (FaceProxy)obj;
asmDoc.SelectSet.Select(m_asmCompDef.Occurrences[2]);
//((PartDocument)smcd.Document).SelectSet.Select(m_asmCompDef.Occurrences[2].CreateGeometryProxy());
//double[] pts = {face.PointOnFace.X,face.PointOnFace.Y,face.PointOnFace.Z};
//double[] normals = {0,0,0};
//face.Evaluator.GetNormalAtPoint(ref pts, ref normals);
//Plane pl = invApp.TransientGeometry.CreatePlane(face.PointOnFace, invApp.TransientGeometry.CreateVector(normals[0], normals[1], normals[2]));
//obj = m_asmCompDef.Occurrences[2].Definition.SurfaceBodies[1];
//m_PartDoc.SelectSet.Select()
obj = null;
WorkPlane wp = smcd2.WorkPlanes[3];
m_asmCompDef.Occurrences[1].CreateGeometryProxy(face, out obj);
FaceProxy face2 = (FaceProxy)obj;
ps = smcd.Sketches.Add(face2);
ProjectedCut cut = ps.ProjectedCuts.Add();
PlanarSketch pls = smcd2.Sketches.Add(smcd2.WorkPlanes[3]);
m_asmCompDef.Occurrences[2].CreateGeometryProxy(pls, out obj);
psp = (PlanarSketchProxy)obj;
foreach (var item in ps.SketchLines)
{
m_asmCompDef.Occurrences[1].CreateGeometryProxy(item, out obj);
psp.AddByProjectingEntity(obj);
}
//m_asmCompDef.Occurrences[2].CreateGeometryProxy(smcd.WorkPlanes[3],out obj);
//m_asmCompDef.Occurrences[1].CreateGeometryProxy(ps,out obj);
//psp.ProjectedCuts.Add();
TransientGeometry tr = invApp.TransientGeometry;
//cmdMgr.ControlDefinitions["SketchProjectCutEdgesCmd"].Execute();
//enumerat = invApp.TransientGeometry.SurfaceSurfaceIntersection(m_asmCompDef.Occurrences[2].Definition.SurfaceBodies[1], pl);
}
catch (Exception)
{
throw;
}
}
static public CutFeature addCut(SheetMetalComponentDefinition smcd, string name)
{
SheetMetalFeatures smf = (SheetMetalFeatures)smcd.Features;
PlanarSketch ps = smcd.Sketches[name];
CutDefinition cd = smf.CutFeatures.CreateCutDefinition(ps.Profiles.AddForSolid());
try
{ cd.SetCutAcrossBendsExtent("Толщина"); }
catch (Exception)
{
cd.SetCutAcrossBendsExtent("Thickness");
}
return(smf.CutFeatures.Add(cd));
}
public static void createProfile(PartDocument oDoc)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
FaceCollection oFaceColl = iApp.TransientObjects.CreateFaceCollection();
foreach (Face f in oCompDef.SurfaceBodies[1].Faces)
{
oFaceColl.Add(f);
}
PartFeatures oFeat = oCompDef.Features;
oFeat.ThickenFeatures.Add(oFaceColl, Math.Round(oCompDef.Thickness.Value * 100) / 100, PartFeatureExtentDirectionEnum.kNegativeExtentDirection, PartFeatureOperationEnum.kJoinOperation, false);
}
// ! Creo lo sviluppo della lamiera
public static bool sviluppoLamiera(PartDocument oDoc)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
try
{
oCompDef.Unfold();
return(true);
}
catch
{
return(false);
}
}
public static void setThicknessFisso(PartDocument oDoc, string parametro)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
string toSelect = parametro;
if (!string.IsNullOrEmpty(toSelect))
{
SheetMetalStyle oStyle = oCompDef.SheetMetalStyles[toSelect];
oStyle.Activate();
}
else
{
throw new Exception("Nessuno spessore trovato");
}
}
private void button1_Click(object sender, EventArgs e)
{
a = Convert.ToDouble(this.textBox1.Text.Replace(',', separator)) / 10;
b = Convert.ToDouble(this.textBox2.Text.Replace(',', separator)) / 10;
this.Hide();
try
{
invApp = (Inventor.Application)m_PartDoc.Parent;
if (m_PartDoc.SubType == "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}")
{
smcd = (SheetMetalComponentDefinition)m_PartDoc.ComponentDefinition;
}
tr = invApp.TransactionManager.StartTransaction((_Document)m_PartDoc, "Шипы");
objCol = invApp.TransientObjects.CreateObjectCollection();
if (asmDoc != null)
{
ComponentOccurrence co = asmDoc.ComponentDefinition.Occurrences.OfType <ComponentOccurrence>().FirstOrDefault(c => c.Name.ToLower().IndexOf("обтекатель") != -1);
if (co != null)
{
//PartDocument pDoc;
if (((Document)co.Definition.Document).SubType == "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}")
{
smcd = (SheetMetalComponentDefinition)((PartDocument)co.Definition.Document).ComponentDefinition;
}
PlanarSketch plsk = smcd.Sketches.OfType <PlanarSketch>().FirstOrDefault(p => p.Name == "Шип");
if (plsk == null)
{
project(smcd, "Шип");
}
}
return;
}
profiles = selectFromSketch();
//offsetAdaptive(profiles);
offset(profiles);
tr.End();
this.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString());
tr.End();
this.Close();
}
}
public static void deleteFace(PartDocument oDoc, List <string> faceCollToKeep)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
FaceCollection faceCollToDelete = iApp.TransientObjects.CreateFaceCollection();
foreach (Face oFace in oCompDef.SurfaceBodies[1].Faces)
{
if (!faceCollToKeep.Contains(oFace.InternalName))
{
faceCollToDelete.Add(oFace);
}
}
PartFeatures oFeat = oCompDef.Features;
oFeat.DeleteFaceFeatures.Add(faceCollToDelete);
}
public static Face getBiggestFace(PartDocument oDoc)
{
SheetMetalComponentDefinition oCompDef = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
Face biggestFace = null;
double area = 0;
foreach (Face f in oCompDef.SurfaceBodies[1].Faces)
{
if (f.Evaluator.Area > area)
{
area = f.Evaluator.Area;
biggestFace = f;
}
}
return(biggestFace);
}
public Material(Document doc, string [] arr /*{ "MaterialUpLine", "MaterialDownLine", "MaterialLine", "MaterialCenter" }*/) : base(doc, arr)
{
pDoc = doc as PartDocument;
if (pDoc == null)
{
return;
}
string path = doc.pathUtil();
smcd = pDoc.ComponentDefinition as SheetMetalComponentDefinition;
if (smcd == null)
{
return;
}
xDoc = xDoc ?? XDocument.Load(@"C:\ProgramData\Autodesk\Inventor Addins\Material.xml");
if (System.IO.File.Exists(path + "\\Material.xml"))
{
xDoc = XDocument.Load(path + "\\Material.xml");
}
}
static public ComponentOccurrence findFlange(AssemblyComponentDefinition acd)
{
foreach (ComponentOccurrence occ1 in acd.Occurrences)
{
if (((Document)occ1.Definition.Document).SubType == "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}")
{
SheetMetalComponentDefinition smcd = (SheetMetalComponentDefinition)occ1.Definition;
if (smcd.ReferenceComponents.DerivedPartComponents.Count == 1 &&
(smcd.ReferenceComponents.DerivedPartComponents[1].Definition as DerivedPartUniformScaleDef).Mirror)
{
continue;
}
if (smcd.Features[1] is FaceFeature)
{
return(occ1);
}
}
}
return(null);
}
public static void main(string path)
{
// ! prendo instanza Inventor
getIstance();
PartDocument oDoc = (PartDocument)iApp.ActiveDocument;
// ! Imposto SheetMetalDocument
setSheetMetalDocument(oDoc);
// ! Imposto thickness
setThickness(oDoc);
SheetMetalComponentDefinition oComp = (SheetMetalComponentDefinition)oDoc.ComponentDefinition;
WorkPlane oWpReference = null;
List <string> nameWp = new List <string>();
bool manual = false;
foreach (WorkPlane oWp in oComp.WorkPlanes)
{
nameWp.Add(oWp.Name);
if (oWp.Name == "manualPlane")
{
oWpReference = oWp;
manual = true;
}
}
if (!manual)
{
// ! Elimino raggiature
List <string> faceCollToKeep = deleteFillet(oDoc);
// ! Elimino facce
deleteFace(oDoc, faceCollToKeep);
// ! Creo Profilo
createProfile(oDoc);
// ! Creo Raggiature
createFillet(oDoc);
// ! Cerco le lavorazioni
IDictionary <Face, List <Lavorazione> > lavorazione = detectLavorazioni(oDoc);
// ! Creo sketch lavorazioni
List <string> nomeSketch = createSketchLavorazione(oDoc, lavorazione);
// ! Elimino con direct le lavorazioni
deleteLavorazione(oDoc);
// ! Cut lavorazione
createCutLavorazione(oDoc, nomeSketch);
// ! Aggiungo piano nel mezzo
oWpReference = addPlaneInTheMiddleOfBox(oDoc);
// ! Aggiungo proiezione cut
addProjectCut(oDoc, oWpReference, manual);
// ! Coloro lato bello
}
else
{
addProjectCut(oDoc, oWpReference, manual);
}
setTexture(oDoc);
oDoc.Close();
}
static public PlanarSketch projectAcrosParts(ref AssemblyComponentDefinition acd, string [] nameIn, string nameOut, string sketchName, ref SheetMetalComponentDefinition smcd)
{
PlanarSketch psIn, psOut;
ComponentOccurrence occ2;
SheetMetalComponentDefinition smcd1;
Profile pr;
object sketchLineProxy;
object psp;
PlanarSketchProxy plsP;
SketchEntity se;
occ2 = findFlange(acd);
PartComponentDefinition def = (PartComponentDefinition)occ2.Definition;
psOut = def.Sketches.OfType <PlanarSketch>().FirstOrDefault(s => s.Name == sketchName);
if (psOut == null)
{
psOut = def.Sketches.Add(def.SurfaceBodies[1].Faces.OfType <Face>().Where(f => f.CreatedByFeature is FaceFeature).OrderByDescending(o => o.Evaluator.Area).ElementAt(1));
}
occ2.CreateGeometryProxy(psOut, out psp);
plsP = (PlanarSketchProxy)psp;
if (((Document)occ2.Definition.Document).SubType == "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}")
{
smcd = (SheetMetalComponentDefinition)occ2.Definition;
}
foreach (ComponentOccurrence occ1 in acd.Occurrences)
{
if (occ1 == null)
{
continue;
}
if (((Document)occ1.Definition.Document).SubType == "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}")
{
smcd1 = (SheetMetalComponentDefinition)occ1.Definition;
if (!(smcd1.Features[1] is ContourFlangeFeature))
{
continue;
}
}
psIn = ((PartComponentDefinition)occ1.Definition).Sketches[sketchName];
pr = psIn.Profiles.AddForSolid();
psIn.Visible = false;
//ProjectedCut pc = psIn.ProjectedCuts[1];
occ1.CreateGeometryProxy(pr, out sketchLineProxy);
//plsP.AddByProjectingEntity(sketchLineProxy);
//foreach (SketchEntity s in ((ProjectedCut)sketchLineProxy).SketchEntities)
//{
// if (s.)
// plsP.AddByProjectingEntity(s);
//}
foreach (ProfilePath pp in (Profile)sketchLineProxy)
{
foreach (ProfileEntity ent in pp)
{
se = plsP.AddByProjectingEntity(ent.SketchEntity);
}
}
}
return(psOut);
}
public FlatPattern(SheetMetalComponentDefinition sheetMetalCompDef)
{
this.sheetMetalCompDef = sheetMetalCompDef;
inventorConnection = new InventorConnection();
}
static public void offsetAdaptive(SheetMetalComponentDefinition smcd, string name, double valA, double valB, double valB1)
{
double a = valA, b = valB;
PlanarSketch ps = smcd.Sketches[name];
PlanarSketch newSketch = smcd.Sketches.Add(ps.PlanarEntity);
name = newSketch.Name;
Profile profiles = ps.Profiles.AddForSolid();
foreach (ProfilePath pr in profiles)
{
bool flag = cmpLen(pr, valB1 - 0.03);
if (flag)
{
b = valB1;/*Convert.ToDouble(this.textBox3.Text.Replace(',', separator)) / 10;*/
}
if (pr.Count == 4)
{
ProfileEntity pe1 = (ProfileEntity)pr[1];
ProfileEntity pe3 = (ProfileEntity)pr[3];
if (pe1.CurveType != Curve2dTypeEnum.kLineSegmentCurve2d || pe1.EndSketchPoint.Geometry.DistanceTo(pe1.StartSketchPoint.Geometry) > valA * 2)
{
pe1 = (ProfileEntity)pr[2]; pe3 = (ProfileEntity)pr[4];
}
//pe1.SketchEntity.Construction = true;
//ProfileEntity pe1 = pr.OfType<ProfileEntity>().FirstOrDefault(e1 => e1.CurveType == Curve2dTypeEnum.kLineCurve2d &&
// (e1.EndSketchPoint.Geometry.DistanceTo(e1.StartSketchPoint.Geometry) <= 0.1));
//ProfileEntity pe3 = pr.OfType<ProfileEntity>().LastOrDefault(e1 => e1.CurveType == Curve2dTypeEnum.kLineCurve2d &&
// (e1.EndSketchPoint.Geometry.DistanceTo(e1.StartSketchPoint.Geometry) <= 0.1));
if (pe1 == null || pe3 == null)
{
continue;
}
//SketchLine sl1 = (SketchLine)pe1.SketchEntity;
//SketchLine sl2 = (SketchLine)pe3.SketchEntity;
SketchLine sl1 = (SketchLine)newSketch.AddByProjectingEntity(pe1.SketchEntity);
SketchLine sl2 = (SketchLine)newSketch.AddByProjectingEntity(pe3.SketchEntity);
//sl2.Construction = true;
SketchLine sl3 = midleLine(sl1, sl2);
SketchPoint mp = newSketch.SketchPoints.Add(sl3.Geometry.MidPoint, false);
MidpointConstraint mpc = newSketch.GeometricConstraints.AddMidpoint(mp, sl3);
//SketchBlock sb;
//SketchLine newLin;
//if (b == valB)
//{
// sb = ps.SketchBlocks.AddByDefinition(smcd.SketchBlockDefinitions["Паз"], mp.Geometry);
//}
//else
//{
// sb = ps.SketchBlocks.AddByDefinition(smcd.SketchBlockDefinitions["Паз_замыкающий"], mp.Geometry);
//}
// newLin = ps.SketchLines.OfType<SketchLine>().LastOrDefault(l => l.Construction == true);
// ps.GeometricConstraints.AddCollinear((SketchEntity)newLin, (SketchEntity)sl3);
rect(sl3, mp, a, b);
}
}
//foreach (SketchBlock item in ps.SketchBlocks)
//{
// item.Explode();
//}
//foreach (DimensionConstraint item in newSketch.DimensionConstraints)
//{
// item.Delete();
//}
//addEqualLength(newSketch, valA);
//addEqualLength(newSketch, valB);
//addEqualLength(newSketch, valB1);
CutFeature cut = addCut(smcd, name); cut.Name = "Пазы";
}