private void VerifyCtor(string portName, Type expectedException, ThrowAt throwAt)
{
SerialPortProperties serPortProp = new SerialPortProperties();
Debug.WriteLine($"Verifying properties where PortName={portName}");
try
{
using (SerialPort com = new SerialPort(portName))
{
if (null != expectedException && throwAt == ThrowAt.Set)
{
Assert.True(false, $"Err_7212ahsdj Expected Ctor to throw {expectedException}");
}
serPortProp.SetAllPropertiesToDefaults();
serPortProp.SetProperty("PortName", portName);
serPortProp.VerifyPropertiesAndPrint(com);
}
}
catch (Xunit.Sdk.TrueException)
{
// This is an inner failure
throw;
}
catch (Exception e)
{
if (null == expectedException)
{
Assert.True(false, $"Err_07081hadnh Did not expect exception to be thrown and the following was thrown: \n{e}");
}
else if (throwAt == ThrowAt.Open)
{
Assert.True(false, $"Err_88916adfa Expected {expectedException} to be thrown at Open and the following was thrown at Set: \n{e}");
}
else if (e.GetType() != expectedException)
{
Assert.True(false, $"Err_90282ahwhp Expected {expectedException} to be thrown and the following was thrown: \n{e}");
}
}
}
private void VerifyExceptionAtOpen(SerialPort com, int stopBits, ThrowAt throwAt, Type expectedException)
{
int origStopBits = (int)com.StopBits;
SerialPortProperties serPortProp = new SerialPortProperties();
serPortProp.SetAllPropertiesToDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
if (ThrowAt.Open == throwAt)
{
serPortProp.SetProperty("StopBits", (StopBits)stopBits);
}
try
{
com.StopBits = (StopBits)stopBits;
if (ThrowAt.Open == throwAt)
{
com.Open();
}
if (null != expectedException)
{
Fail("ERROR!!! Expected Open() to throw {0} and nothing was thrown", expectedException);
}
}
catch (Exception e)
{
if (null == expectedException)
{
Fail("ERROR!!! Expected Open() NOT to throw an exception and {0} was thrown", e.GetType());
}
else if (e.GetType() != expectedException)
{
Fail("ERROR!!! Expected Open() throw {0} and {1} was thrown", expectedException, e.GetType());
}
}
serPortProp.VerifyPropertiesAndPrint(com);
com.StopBits = (StopBits)origStopBits;
}
public void BreakState_false()
{
using (SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName))
{
SerialPortProperties serPortProp = new SerialPortProperties();
Debug.WriteLine("Verifying false BreakState");
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
com1.Open();
SetBreakStateandVerify(com1);
serPortProp.SetProperty("BreakState", false);
com1.BreakState = false;
serPortProp.VerifyPropertiesAndPrint(com1);
Assert.False(GetCurrentBreakState());
}
}
public bool openDefault()
{
SerialPort com = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue;
com.Open();
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
Console.WriteLine("Verifying after calling Open()");
Console.WriteLine("BytesToWrite={0}", com.BytesToWrite);
retValue = serPortProp.VerifyPropertiesAndPrint(com);
if (com.IsOpen)
{
com.Close();
}
return(retValue);
}
private void VerifyCtor(string portName, int baudRate, int parity, int dataBits, Type expectedException, ThrowAt throwAt)
{
SerialPortProperties serPortProp = new SerialPortProperties();
Debug.WriteLine("Verifying properties where PortName={0},BaudRate={1},Parity={2},DatBits={3}", portName, baudRate, parity, dataBits);
try
{
using (SerialPort com = new SerialPort(portName, baudRate, (Parity)parity, dataBits))
{
if (null != expectedException && throwAt == ThrowAt.Set)
{
Fail("Err_7212ahsdj Expected Ctor to throw {0}", expectedException);
}
serPortProp.SetAllPropertiesToDefaults();
serPortProp.SetProperty("PortName", portName);
serPortProp.SetProperty("BaudRate", baudRate);
serPortProp.SetProperty("Parity", (Parity)parity);
serPortProp.SetProperty("DataBits", dataBits);
serPortProp.VerifyPropertiesAndPrint(com);
}
}
catch (Exception e)
{
if (null == expectedException)
{
Fail("Err_07081hadnh Did not expect exception to be thrown and the following was thrown: \n{0}", e);
}
else if (throwAt == ThrowAt.Open)
{
Fail("Err_88916adfa Expected {0} to be thrown at Open and the following was thrown at Set: \n{1}", expectedException, e);
}
else if (e.GetType() != expectedException)
{
Fail("Err_90282ahwhp Expected {0} to be thrown and the following was thrown: \n{1}", expectedException, e);
}
}
}
public bool ReadBufferSize_Default()
{
SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Console.WriteLine("Verifying default ReadBufferSize before Open");
serPortProp.SetAllPropertiesToDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
Console.WriteLine("Verifying default ReadBufferSize after Open");
com1.Open();
serPortProp = new SerialPortProperties();
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
Console.WriteLine("Verifying default ReadBufferSize after Close");
com1.Close();
serPortProp = new SerialPortProperties();
serPortProp.SetAllPropertiesToDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
if (!retValue)
{
Console.WriteLine("Err_001!!! Verifying default ReadBufferSize FAILED");
}
if (com1.IsOpen)
{
com1.Close();
}
return(retValue);
}
public void OpenTwoInstances()
{
using (SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName))
using (SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName))
{
SerialPortProperties serPortProp1 = new SerialPortProperties();
SerialPortProperties serPortProp2 = new SerialPortProperties();
Debug.WriteLine("Verifying calling Open() on two instances of SerialPort");
serPortProp1.SetAllPropertiesToOpenDefaults();
serPortProp1.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
serPortProp2.SetAllPropertiesToDefaults();
serPortProp2.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
com1.Open();
Assert.Throws <UnauthorizedAccessException>(() => com2.Open());
serPortProp1.VerifyPropertiesAndPrint(com1);
serPortProp2.VerifyPropertiesAndPrint(com2);
}
}
public void DataBits_8_StopBitsOnePointFive()
{
using (SerialPort com = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName))
{
SerialPortProperties serPortProp = new SerialPortProperties();
Debug.WriteLine("Verifying setting DataBits=8 from 5 with StopBits=1.5");
com.DataBits = 5;
com.StopBits = StopBits.OnePointFive;
com.Open();
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
serPortProp.SetProperty("StopBits", StopBits.OnePointFive);
serPortProp.SetProperty("DataBits", 5);
Assert.Throws <IOException>(() => com.DataBits = 8);
serPortProp.VerifyPropertiesAndPrint(com);
}
}
private bool VerifyExceptionAfterOpen(SerialPort com, int baudRate, System.Type expectedException)
{
bool retValue = true;
SerialPortProperties serPortProp = new SerialPortProperties();
com.Open();
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
try
{
com.BaudRate = baudRate;
if (null != expectedException)
{
Console.WriteLine("ERROR!!! Expected setting the BaudRate after Open() to throw {0} and nothing was thrown", expectedException);
retValue = false;
}
else
{
serPortProp.SetProperty("BaudRate", baudRate);
}
}
catch (System.Exception e)
{
if (null == expectedException)
{
Console.WriteLine("ERROR!!! Expected setting the BaudRate after Open() NOT to throw an exception and {0} was thrown", e.GetType());
retValue = false;
}
else if (e.GetType() != expectedException)
{
Console.WriteLine("ERROR!!! Expected setting the BaudRate after Open() throw {0} and {1} was thrown", expectedException, e.GetType());
retValue = false;
}
}
retValue &= serPortProp.VerifyPropertiesAndPrint(com);
return(retValue);
}
public bool CDHolding_Default()
{
SerialPort com1 = new SerialPort();
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Console.WriteLine("Verifying default CDHolding before Open");
serPortProp.SetAllPropertiesToDefaults();
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
if (!retValue)
{
Console.WriteLine("Err_001!!! Verifying default CDHolding before Open FAILED");
}
if (com1.IsOpen)
{
com1.Close();
}
return(retValue);
}
public void BytesToRead_RcvRndNumBytes()
{
using (SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName))
using (SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName))
{
SerialPortProperties serPortProp = new SerialPortProperties();
Debug.WriteLine("Verifying BytesToRead after receiving a random number of bytes");
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
com1.Open();
com2.Open();
com2.Write(new byte[DEFAULT_NUM_RND_BYTES], 0, DEFAULT_NUM_RND_BYTES);
serPortProp.SetProperty("BytesToRead", DEFAULT_NUM_RND_BYTES);
Thread.Sleep(100); //Wait for com1 to get all of the bytes
serPortProp.VerifyPropertiesAndPrint(com1);
}
}
public void DsrHolding_true()
{
using (SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName))
using (SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName))
{
SerialPortProperties serPortProp = new SerialPortProperties();
Debug.WriteLine("Verifying DsrHolding=true on com1 when com2.DtrEnable=true");
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
serPortProp.SetProperty("DsrHolding", true);
com1.Open();
com2.Open();
com2.DtrEnable = true;
serPortProp.SetProperty("CDHolding", com1.CDHolding);
//We dont care what this is set to since some serial cables loop CD to CTS
serPortProp.VerifyPropertiesAndPrint(com1);
}
}
private bool VerifyExceptionAtOpen(SerialPort com, int receivedBytesThreshold, System.Type expectedException)
{
int origReceivedBytesThreshold = com.ReceivedBytesThreshold;
bool retValue = true;
SerialPortProperties serPortProp = new SerialPortProperties();
serPortProp.SetAllPropertiesToDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
try
{
com.ReceivedBytesThreshold = receivedBytesThreshold;
if (null != expectedException)
{
Console.WriteLine("ERROR!!! Expected Open() to throw {0} and nothing was thrown", expectedException);
retValue = false;
}
}
catch (System.Exception e)
{
if (null == expectedException)
{
Console.WriteLine("ERROR!!! Expected Open() NOT to throw an exception and {0} was thrown", e.GetType());
retValue = false;
}
else if (e.GetType() != expectedException)
{
Console.WriteLine("ERROR!!! Expected Open() throw {0} and {1} was thrown", expectedException, e.GetType());
retValue = false;
}
}
retValue &= serPortProp.VerifyPropertiesAndPrint(com);
com.ReceivedBytesThreshold = origReceivedBytesThreshold;
return(retValue);
}
public bool DataBits_8_StopBitsOnePointFive()
{
SerialPort com = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
bool retValue = true;
SerialPortProperties serPortProp = new SerialPortProperties();
Console.WriteLine("Verifying setting DataBits=8 from 5 with StopBits=1.5");
com.DataBits = 5;
com.StopBits = StopBits.OnePointFive;
com.Open();
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
serPortProp.SetProperty("StopBits", StopBits.OnePointFive);
serPortProp.SetProperty("DataBits", 5);
try
{
com.DataBits = 8;
Console.WriteLine("ERROR!!! Setting DataBits did not thow an exception");
retValue = false;
}
catch (System.IO.IOException) { }
catch (System.Exception e)
{
Console.WriteLine("ERROR!!! Expected IOException and {0} was thrown", e.GetType());
retValue = false;
}
retValue &= serPortProp.VerifyPropertiesAndPrint(com);
if (!retValue)
{
Console.WriteLine("Err_018!!! Verifying setting DataBits=8 from 5 with StopBits=1.5 FAILED");
}
return(retValue);
}
public bool OpenClose_Properties()
{
SerialPort com = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
bool retValue = true;
SerialPortProperties serPortProp = new SerialPortProperties();
Console.WriteLine("Verifying Properites after calling Open() and BaseStream.Close()");
com.Open();
com.BaseStream.Close();
serPortProp.SetAllPropertiesToDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
retValue &= serPortProp.VerifyPropertiesAndPrint(com);
if (!retValue)
{
Console.WriteLine("Err_001!!! erifying Properites after calling Open() and BaseStream.Close() FAILED");
}
return(retValue);
}
public void OpenCloseNewInstanceOpen()
{
using (SerialPort com = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName))
{
SerialPortProperties serPortProp = new SerialPortProperties();
Debug.WriteLine(
"Calling Close() after calling Open() then create a new instance of SerialPort and call Open() again");
com.Open();
com.BaseStream.Close();
using (var newCom = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName))
{
try
{
newCom.Open();
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
serPortProp.VerifyPropertiesAndPrint(newCom);
}
catch (Exception e)
{
Fail("ERROR!!! Open() threw {0}", e.GetType());
}
try
{
if (com.IsOpen)
{
com.Close();
}
}
catch (Exception)
{
}
}
}
}
public bool BytesToRead_RcvRndNumBytes()
{
SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName);
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Console.WriteLine("Verifying BytesToRead after receiving a random number of bytes");
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
com1.Open();
com2.Open();
com2.Write(new byte[DEFUALT_NUM_RND_BYTES], 0, DEFUALT_NUM_RND_BYTES);
serPortProp.SetProperty("BytesToRead", DEFUALT_NUM_RND_BYTES);
System.Threading.Thread.Sleep(100);//Wait for com1 to get all of the bytes
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
if (!retValue)
{
Console.WriteLine("Err_002!!! Verifying BytesToRead after receiving a random number of bytes FAILED");
}
if (com1.IsOpen)
{
com1.Close();
}
if (com2.IsOpen)
{
com2.Close();
}
return(retValue);
}
public bool BaseStream_Default()
{
SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Console.WriteLine("Verifying default BaseStream");
serPortProp.SetAllPropertiesToDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
if (!retValue)
{
Console.WriteLine("Err_001!!! Verifying default BaseStream FAILED");
}
if (com1.IsOpen)
{
com1.Close();
}
return(retValue);
}
public bool DsrHolding_true()
{
SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName);
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Console.WriteLine("Verifying DsrHolding=true on com1 when com2.DtrEnable=true");
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
serPortProp.SetProperty("DsrHolding", true);
com1.Open();
com2.Open();
com2.DtrEnable = true;
serPortProp.SetProperty("CDHolding", com1.CDHolding); //We dont care what this is set to since some serial cables loop CD to CTS
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
if (!retValue)
{
Console.WriteLine("Err_003!!! Verifying DsrHolding=true on com1 when com2.DtrEnable=true FAILED");
}
if (com1.IsOpen)
{
com1.Close();
}
if (com2.IsOpen)
{
com2.Close();
}
return(retValue);
}
private void VerifyInfiniteTimeout(WriteMethodDelegate writeMethod, bool setInfiniteTimeout)
{
using (SerialPort com1 = TCSupport.InitFirstSerialPort())
{
SerialPortProperties serPortProp = new SerialPortProperties();
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
com1.Handshake = Handshake.RequestToSend;
serPortProp.SetProperty("ReadTimeout", 10);
com1.ReadTimeout = 10;
com1.Open();
if (setInfiniteTimeout)
{
com1.WriteTimeout = 500;
com1.WriteTimeout = SerialPort.InfiniteTimeout;
}
Task task = Task.Run(() => writeMethod(com1));
Thread.Sleep(DEFAULT_WAIT_INFINITE_TIMEOUT);
Assert.False(task.IsCompleted, "Task should not have completed while tx is blocked by flow-control");
com1.Handshake = Handshake.None;
TCSupport.WaitForTaskCompletion(task);
com1.DiscardOutBuffer();
// If we're looped-back, then there will be data queued on the receive side which we need to discard
com1.DiscardInBuffer();
serPortProp.VerifyPropertiesAndPrint(com1);
}
}
public bool CtsHolding_true()
{
SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName);
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Console.WriteLine("Verifying CtsHolding=true on com1 when com2.RtsEnable=true");
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
serPortProp.SetProperty("CtsHolding", true);
com1.Open();
com2.Open();
com2.RtsEnable = true;
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
if (!retValue)
{
Console.WriteLine("Err_003!!! Verifying CtsHolding=true on com1 when com2.RtsEnable=true FAILED");
}
if (com1.IsOpen)
{
com1.Close();
}
if (com2.IsOpen)
{
com2.Close();
}
return(retValue);
}
public bool OpenFillBuffersClose()
{
SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName);
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Console.WriteLine("Calling Open(), fill both trasmit and receive buffers, call Close()");
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
//Setting com1 to use Handshake so we can fill read buffer
com1.Handshake = Handshake.RequestToSend;
com1.Open();
com2.Open();
//BeginWrite is used so we can fill the read buffer then go onto to verify
com1.BaseStream.BeginWrite(new Byte[numWriteBytes], 0, numWriteBytes, null, null);
com2.Write(new Byte[numReadBytes], 0, numReadBytes);
System.Threading.Thread.Sleep(500);
serPortProp.SetProperty("Handshake", Handshake.RequestToSend);
serPortProp.SetProperty("BytesToWrite", numWriteBytes);
serPortProp.SetProperty("BytesToRead", numReadBytes);
Console.WriteLine("Verifying properties after port is open and bufferes have been filled");
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
com1.Handshake = Handshake.None;
com1.BaseStream.Close();
serPortProp.SetAllPropertiesToDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
Console.WriteLine("Verifying properties after port has been closed");
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
try
{
com1.Open();
}
catch (System.Exception e)
{
Console.WriteLine("ERROR!!! Open() threw {0}", e.GetType());
retValue = false;
}
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
Console.WriteLine("Verifying properties after port has been opened again");
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
try
{
if (com1.IsOpen)
{
com1.Close();
}
}
catch (Exception) { }
if (com2.IsOpen)
{
com2.Close();
}
if (!retValue)
{
Console.WriteLine("Err_002!!! Verifying calling Open(), fill both trasmit and receive buffers, call Close() FAILED");
}
return(retValue);
}
private bool VerifyReadBufferSizeBeforeOpen(int newReadBufferSize)
{
SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName);
byte[] xmitBytes = new byte[newReadBufferSize];
byte[] rcvBytes;
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Random rndGen = new Random(-55);
int newBytesToRead = 0;
for (int i = 0; i < xmitBytes.Length; i++)
{
xmitBytes[i] = (byte)rndGen.Next(0, 256);
}
if (newReadBufferSize < 4096)
{
newBytesToRead = Math.Min(4096, xmitBytes.Length + (xmitBytes.Length / 2));
}
else
{
newBytesToRead = Math.Min(newReadBufferSize, xmitBytes.Length);
}
rcvBytes = new byte[newBytesToRead];
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
com1.ReadBufferSize = newReadBufferSize;
serPortProp.SetProperty("ReadBufferSize", newReadBufferSize);
com1.Open();
com2.Open();
int origBaudRate = com1.BaudRate;
com2.BaudRate = 115200;
com1.BaudRate = 115200;
for (int j = 0; j < 1; j++)
{
com2.Write(xmitBytes, 0, xmitBytes.Length);
com2.Write(xmitBytes, xmitBytes.Length / 2, xmitBytes.Length / 2);
while (newBytesToRead > com1.BytesToRead)
{
System.Threading.Thread.Sleep(50);
}
System.Threading.Thread.Sleep(250); //This is to wait for the bytes to be received after the buffer is full
serPortProp.SetProperty("BytesToRead", newBytesToRead);
serPortProp.SetProperty("BaudRate", 115200);
Console.WriteLine("Verifying properties after bytes have been written");
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
com1.Read(rcvBytes, 0, newBytesToRead);
for (int i = 0; i < newReadBufferSize; i++)
{
if (rcvBytes[i] != xmitBytes[i])
{
Console.WriteLine("ERROR!!!: Expected to read byte {0} actual={1} at {2}", xmitBytes[i], rcvBytes[i], i);
retValue = false;
}
}
Console.WriteLine("Verifying properties after bytes have been read");
serPortProp.SetProperty("BytesToRead", 0);
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
}
com2.Write(xmitBytes, 0, xmitBytes.Length);
com2.Write(xmitBytes, xmitBytes.Length / 2, xmitBytes.Length / 2);
while (newBytesToRead > com1.BytesToRead)
{
System.Threading.Thread.Sleep(50);
}
serPortProp.SetProperty("BytesToRead", newBytesToRead);
Console.WriteLine("Verifying properties after writing bytes");
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
com2.BaudRate = origBaudRate;
com1.BaudRate = origBaudRate;
if (com1.IsOpen)
{
com1.Close();
}
if (com2.IsOpen)
{
com2.Close();
}
return(retValue);
}
private void VerifyReadBufferSize(SerialPort com1)
{
using (SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName))
{
int readBufferSize = com1.ReadBufferSize;
byte[] xmitBytes = new byte[1024];
SerialPortProperties serPortProp = new SerialPortProperties();
Random rndGen = new Random(-55);
int bytesToRead = readBufferSize < 4096 ? 4096 : readBufferSize;
int origBaudRate = com1.BaudRate;
int origReadTimeout = com1.ReadTimeout;
int bytesRead;
for (int i = 0; i < xmitBytes.Length; i++)
{
xmitBytes[i] = (byte)rndGen.Next(0, 256);
}
//bytesToRead = Math.Min(4096, xmitBytes.Length + (xmitBytes.Length / 2));
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
serPortProp.SetProperty("ReadBufferSize", readBufferSize);
serPortProp.SetProperty("BaudRate", 115200);
com2.Open();
com2.BaudRate = 115200;
com1.BaudRate = 115200;
for (int i = 0; i < bytesToRead / xmitBytes.Length; i++)
{
com2.Write(xmitBytes, 0, xmitBytes.Length);
}
com2.Write(xmitBytes, 0, xmitBytes.Length / 2);
while (bytesToRead > com1.BytesToRead)
{
System.Threading.Thread.Sleep(50);
}
System.Threading.Thread.Sleep(250); //This is to wait for the bytes to be received after the buffer is full
var rcvBytes = new byte[(int)(bytesToRead * 1.5)];
if (bytesToRead != (bytesRead = com1.Read(rcvBytes, 0, rcvBytes.Length)))
{
Fail("Err_2971ahius Did not read all expected bytes({0}) bytesRead={1} ReadBufferSize={2}", bytesToRead, bytesRead, com1.ReadBufferSize);
}
for (int i = 0; i < bytesToRead; i++)
{
if (rcvBytes[i] != xmitBytes[i % xmitBytes.Length])
{
Fail("Err_70929apba!!!: Expected to read byte {0} actual={1} at {2}", xmitBytes[i % xmitBytes.Length], rcvBytes[i], i);
}
}
serPortProp.SetProperty("BytesToRead", 0);
serPortProp.VerifyPropertiesAndPrint(com1);
com1.ReadTimeout = 250;
// "Err_1707ahspb!!!: After reading all bytes from buffer ReadByte() did not timeout");
Assert.Throws <TimeoutException>(() => com1.ReadByte());
com1.ReadTimeout = origReadTimeout;
}
}
private void VerifyReadBufferSizeBeforeOpen(int newReadBufferSize)
{
using (SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName))
using (SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName))
{
byte[] xmitBytes = new byte[newReadBufferSize];
byte[] rcvBytes;
SerialPortProperties serPortProp = new SerialPortProperties();
Random rndGen = new Random(-55);
int newBytesToRead;
for (int i = 0; i < xmitBytes.Length; i++)
{
xmitBytes[i] = (byte)rndGen.Next(0, 256);
}
if (newReadBufferSize < 4096)
{
newBytesToRead = Math.Min(4096, xmitBytes.Length + (xmitBytes.Length / 2));
}
else
{
newBytesToRead = Math.Min(newReadBufferSize, xmitBytes.Length);
}
rcvBytes = new byte[newBytesToRead];
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
com1.ReadBufferSize = newReadBufferSize;
serPortProp.SetProperty("ReadBufferSize", newReadBufferSize);
com1.Open();
com2.Open();
int origBaudRate = com1.BaudRate;
com2.BaudRate = 115200;
com1.BaudRate = 115200;
for (int j = 0; j < 1; j++)
{
com2.Write(xmitBytes, 0, xmitBytes.Length);
com2.Write(xmitBytes, xmitBytes.Length / 2, xmitBytes.Length / 2);
while (newBytesToRead > com1.BytesToRead)
{
System.Threading.Thread.Sleep(50);
}
System.Threading.Thread.Sleep(250);
//This is to wait for the bytes to be received after the buffer is full
serPortProp.SetProperty("BytesToRead", newBytesToRead);
serPortProp.SetProperty("BaudRate", 115200);
Debug.WriteLine("Verifying properties after bytes have been written");
serPortProp.VerifyPropertiesAndPrint(com1);
com1.Read(rcvBytes, 0, newBytesToRead);
Assert.Equal(xmitBytes, rcvBytes);
Debug.WriteLine("Verifying properties after bytes have been read");
serPortProp.SetProperty("BytesToRead", 0);
serPortProp.VerifyPropertiesAndPrint(com1);
}
com2.Write(xmitBytes, 0, xmitBytes.Length);
com2.Write(xmitBytes, xmitBytes.Length / 2, xmitBytes.Length / 2);
while (newBytesToRead > com1.BytesToRead)
{
System.Threading.Thread.Sleep(50);
}
serPortProp.SetProperty("BytesToRead", newBytesToRead);
Debug.WriteLine("Verifying properties after writing bytes");
serPortProp.VerifyPropertiesAndPrint(com1);
com2.BaudRate = origBaudRate;
com1.BaudRate = origBaudRate;
}
}
private bool VerifyRtsEnableWithHandshake(bool rtsEnable, Handshake handshake)
{
SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPortProperties serPortProp = new SerialPortProperties();
Handshake originalHandshake;
bool expetectedRtsEnable;
bool retValue = true;
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
com1.RtsEnable = rtsEnable;
com1.Open();
originalHandshake = com1.Handshake;
serPortProp.SetProperty("RtsEnable", rtsEnable);
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
if (!VerifyRtsEnable(com1, rtsEnable))
{
Console.WriteLine("Err_2198219ahied Verifying RtsEnable failed before setting Handshake");
retValue = false;
}
com1.Handshake = handshake;
if (IsRequestToSend(com1))
{
try
{
com1.RtsEnable = !rtsEnable;
}
catch (InvalidOperationException) { }
}
else
{
com1.RtsEnable = !rtsEnable;
com1.RtsEnable = rtsEnable;
}
expetectedRtsEnable = handshake == Handshake.RequestToSend || handshake == Handshake.RequestToSendXOnXOff ?
true : rtsEnable;
if (!VerifyRtsEnable(com1, expetectedRtsEnable))
{
Console.WriteLine("Err_6648ajheid Verifying RtsEnable failed after setting Handshake={0}", handshake);
retValue = false;
}
com1.Handshake = originalHandshake;
expetectedRtsEnable = rtsEnable;
if (!VerifyRtsEnable(com1, expetectedRtsEnable))
{
Console.WriteLine("Err_1250588ajied Verifying RtsEnable failed after setting Handshake back to the original value={0}", originalHandshake);
retValue = false;
}
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
if (com1.IsOpen)
{
com1.Close();
}
return(retValue);
}
private void VerifyExceptionAtOpen(SerialPort com, string portName, ThrowAt throwAt, Type[] expectedExceptions)
{
string origPortName = com.PortName;
SerialPortProperties serPortProp = new SerialPortProperties();
if (null != expectedExceptions && 0 < expectedExceptions.Length)
{
serPortProp.SetAllPropertiesToDefaults();
}
else
{
serPortProp.SetAllPropertiesToOpenDefaults();
}
if (ThrowAt.Open == throwAt)
{
serPortProp.SetProperty("PortName", portName);
}
else
{
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
}
try
{
com.PortName = portName;
if (ThrowAt.Open == throwAt)
{
com.Open();
}
if (null != expectedExceptions && 0 < expectedExceptions.Length)
{
Fail("ERROR!!! Expected Open() to throw ");
for (int i = 0; i < expectedExceptions.Length; ++i)
{
Console.Write(expectedExceptions[i] + " ");
}
Debug.WriteLine(" and nothing was thrown");
}
}
catch (Exception e)
{
if (null == expectedExceptions || 0 == expectedExceptions.Length)
{
Fail("ERROR!!! Expected Open() NOT to throw an exception and the following was thrown:\n{0}", e);
}
else
{
bool exceptionFound = false;
Type actualExceptionType = e.GetType();
for (int i = 0; i < expectedExceptions.Length; ++i)
{
if (actualExceptionType == expectedExceptions[i])
{
exceptionFound = true;
break;
}
}
if (exceptionFound)
{
Debug.WriteLine("Caught expected exception:\n{0}", e.GetType());
}
else
{
Fail("ERROR!!! Expected Open() throw ");
for (int i = 0; i < expectedExceptions.Length; ++i)
{
Console.Write(expectedExceptions[i] + " ");
}
Debug.WriteLine(" and the following was thrown:\n{0}", e);
}
}
}
serPortProp.VerifyPropertiesAndPrint(com);
com.PortName = origPortName;
}
public bool ReceivedBytesThreshold_Above_1()
{
SerialPort com1 = new SerialPort(TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName);
ReceivedEventHandler rcvEventHandler = new ReceivedEventHandler(com1);
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Random rndGen = new Random(-55);
int receivedBytesThreshold = rndGen.Next(MIN_RND_THRESHOLD, MAX_RND_THRESHOLD);
com1.ReceivedBytesThreshold = receivedBytesThreshold + 1;
com1.Open();
com2.Open();
com1.DataReceived += new SerialDataReceivedEventHandler(rcvEventHandler.HandleEvent);
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("ReceivedBytesThreshold", 1);
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
Console.WriteLine("Verifying writing less then number of bytes of ReceivedBytesThreshold then " + "setting ReceivedBytesThreshold to 1");
com2.Write(new byte[receivedBytesThreshold], 0, receivedBytesThreshold);
while (com1.BytesToRead < receivedBytesThreshold)
{
System.Threading.Thread.Sleep(100);
}
if (0 != rcvEventHandler.NumEventsHandled)
{
Console.WriteLine("ERROR!!! Unexpected ReceivedEvent was firered NumEventsHandled={0}", rcvEventHandler.NumEventsHandled);
retValue = false;
}
else
{
com1.ReceivedBytesThreshold = 1;
if (!rcvEventHandler.WaitForEvent(SerialData.Chars, MAX_TIME_WAIT))
{
Console.WriteLine("ERROR!!!: Event never fired");
retValue = false;
}
}
com1.DiscardInBuffer();
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
retValue &= rcvEventHandler.Validate(SerialData.Chars, com1.ReceivedBytesThreshold, 0);
if (!retValue)
{
Console.WriteLine("Err_006!!! Verifying writing less then number of bytes of ReceivedBytesThreshold then " + "setting ReceivedBytesThreshold to 1 FAILED");
}
if (com1.IsOpen)
{
com1.Close();
}
if (com2.IsOpen)
{
com2.Close();
}
return(retValue);
}
private bool VerifyWriteBufferSize(SerialPort com1, int expectedWriteBufferSize)
{
SerialPort com2 = new SerialPort(TCSupport.LocalMachineSerialInfo.SecondAvailablePortName);
byte[] xmitBytes = new byte[Math.Max(expectedWriteBufferSize, com1.WriteBufferSize)];
byte[] rcvBytes = new byte[xmitBytes.Length];
SerialPortProperties serPortProp = new SerialPortProperties();
bool retValue = true;
Random rndGen = new Random(-55);
for (int i = 0; i < xmitBytes.Length; i++)
{
xmitBytes[i] = (byte)rndGen.Next(0, 256);
}
serPortProp.SetAllPropertiesToOpenDefaults();
serPortProp.SetProperty("PortName", TCSupport.LocalMachineSerialInfo.FirstAvailablePortName);
com2.ReadBufferSize = expectedWriteBufferSize;
serPortProp.SetProperty("WriteBufferSize", expectedWriteBufferSize);
com2.Open();
int origBaudRate = com1.BaudRate;
com2.BaudRate = 115200;
com1.BaudRate = 115200;
serPortProp.SetProperty("BaudRate", 115200);
com1.Write(xmitBytes, 0, xmitBytes.Length);
while (xmitBytes.Length > com2.BytesToRead)
{
System.Threading.Thread.Sleep(50);
}
Console.WriteLine("Verifying properties after changing WriteBufferSize");
retValue &= serPortProp.VerifyPropertiesAndPrint(com1);
com2.Read(rcvBytes, 0, rcvBytes.Length);
for (int i = 0; i < expectedWriteBufferSize; i++)
{
if (rcvBytes[i] != xmitBytes[i])
{
Console.WriteLine("ERROR!!!: Expected to read byte {0} actual={1} at {2}", xmitBytes[i], rcvBytes[i], i);
retValue = false;
}
}
com2.BaudRate = origBaudRate;
com1.BaudRate = origBaudRate;
if (com1.IsOpen)
{
com1.Close();
}
if (com2.IsOpen)
{
com2.Close();
}
return(retValue);
}