//int ViewIndex = 0;
protected void CameraSmoothFollow(bool smooth = true)
{
float CameraRadis = 0.0f;
float angleY = 0;//此角度由目标与玩家间的距离的来计算，距离越近越大
Vector3 newPos = Vector3.zero;
Vector3 vecTarget = Vector3.zero;
Vector3 wallHitPos = Vector3.zero;//撞到墙壁的位置
if (UnitTarget.LockTarget != null)
{
//观察格斗的双方
LockTarget = UnitTarget.LockTarget.transform;
//有锁定目标
//开启摄像机锁定系统
CameraLookAt.position = ((Target.position + LockTarget.position) / 2 + new Vector3(0, 25, 0));
CameraRadis = Vector3.Distance(Target.position, LockTarget.position) / 2 + 60;
float dis = Vector3.Distance(new Vector3(Target.position.x, 0, Target.position.z), new Vector3(LockTarget.position.x, 0, LockTarget.position.z));
Vector3 vecDiff = Target.position - LockTarget.position;
Vector3 vecForward = Vector3.Normalize(new Vector3(vecDiff.x, 0, vecDiff.z));
//最远时，15度，最近时95度，其他值。10码 = 80度 140码 15度 约为 y = -0.5x + 85
//半径最低65，最高
angleY = -0.5f * dis + 95;
float yHeight = Mathf.Tan(LookAtAngle * Mathf.Deg2Rad) * CameraRadis;
newViewIndex[0] = CameraLookAt.position + Quaternion.AngleAxis(-angleY, Vector3.up) * vecForward * CameraRadis;
newViewIndex[0].y += yHeight;
newViewIndex[1] = CameraLookAt.position + Quaternion.AngleAxis(angleY, Vector3.up) * vecForward * CameraRadis;
newViewIndex[1].y += yHeight;
newViewIndex[2] = CameraLookAt.position + Quaternion.AngleAxis(-angleY, Target.right) * vecForward * CameraRadis;//顶部最后考虑
//vecTarget[0] = newViewIndex[ViewIndex];
//vecTarget[1] = newViewIndex[(ViewIndex + 1) % 3];
//vecTarget[2] = newViewIndex[(ViewIndex + 2) % 3];
//重新排。当前排第一，顶部排最后，剩下的排第二。这样切换就不会那么频繁.
//for (int i = 0; i < 3; i++)
// m_Targets[i].position = newViewIndex[i];
dis = 1000.0f;
for (int i = 0; i < 2; i++)
{
if (Utility.CameraCanLookTarget(UnitTarget, newViewIndex[i], out wallHitPos))
{
float fdis = Vector3.Distance(newViewIndex[i], transform.position);
if (fdis < dis)
{
dis = fdis;
vecTarget = newViewIndex[i];
}
}
else
{
float fdis = Vector3.Distance(wallHitPos, transform.position);
float disWall = Vector3.Distance(wallHitPos, CameraLookAt.position);//墙壁与看向目标的距离一定要足够，否则视角堵着很难受.
if (fdis < dis && disWall > 40.0f)
{
dis = fdis;
vecTarget = wallHitPos;
}
}
}
//左侧右侧都被墙壁堵住，并且太近
if (vecTarget == Vector3.zero)
{
if (Utility.CameraCanLookTarget(UnitTarget, newViewIndex[2], out wallHitPos))
{
vecTarget = newViewIndex[2];
}
else
{
vecTarget = wallHitPos;
}
}
newPos = vecTarget;
//整个视角都是缓动的
Vector3 velocity = currentVelocity;
transform.position = Vector3.SmoothDamp(transform.position, newPos, ref velocity, SmoothDampTime);
currentVelocity = velocity;
//摄像机朝向观察目标,平滑的旋转视角
Quaternion to = Quaternion.LookRotation(CameraLookAt.position - transform.position, Vector3.up);
transform.rotation = Quaternion.Lerp(transform.rotation, to, SmoothDampTime);
}
else
{
if (xRotate != 0.0f)
{
//根据参数调整高度，和距离.
//最高俯仰75度。
lastAngle -= xRotate;//鼠标往上，是仰视，往下是俯视
if (lastAngle >= angleMax)
{
lastAngle = angleMax;
followDistance = Mathf.Abs((fRadis * Mathf.Cos(lastAngle * Mathf.Deg2Rad)));
followHeight = Mathf.Abs((fRadis * Mathf.Sin(lastAngle * Mathf.Deg2Rad)));
}
else if (lastAngle <= angleMin)
{
lastAngle = angleMin;
followDistance = Mathf.Abs((fRadis * Mathf.Cos(lastAngle * Mathf.Deg2Rad)));
followHeight = -Mathf.Abs((fRadis * Mathf.Sin(lastAngle * Mathf.Deg2Rad)));
}
else
{
followDistance = Mathf.Abs((fRadis * Mathf.Cos(lastAngle * Mathf.Deg2Rad)));
followHeight = lastAngle == 0.0f ? 0 : (lastAngle / Mathf.Abs(lastAngle)) * Mathf.Abs((fRadis * Mathf.Sin(lastAngle * Mathf.Deg2Rad)));
}
}
newPos.x = Target.transform.position.x;
newPos.y = Target.position.y + BodyHeight + followHeight;
newPos.z = Target.transform.position.z;
newPos += Main.Ins.LocalPlayer.transform.forward * followDistance;
vecTarget.x = Target.position.x;
vecTarget.y = Target.position.y + BodyHeight;
vecTarget.z = Target.position.z;
//如果新的位置，与目标注视点中间隔着墙壁
RaycastHit wallHit;
bool hitWall = false;
if (Physics.Linecast(CameraLookAt.position, newPos, out wallHit, LayerManager.AllSceneMask))
{
hitWall = true;
SceneItemAgent item = wallHit.collider.gameObject.GetComponentInParent <SceneItemAgent>();
if (item != null)
{
//不需要移动相机的位置
if (occlusionItem != null)
{
if (item != occlusionItem)
{
occlusionItem.RestoreAlpha();
occlusionItem = item;
occlusionItem.SetAlpha(0.3f);
}
}
else
{
occlusionItem = item;
item.SetAlpha(0.3f);
}
}
else
{
float dis = Vector3.Distance(CameraLookAt.position, wallHit.point);
newPos = wallHit.point + Vector3.Normalize(CameraLookAt.position - wallHit.point) * 5;
}
}
else
{
if (occlusionItem != null)
{
occlusionItem.RestoreAlpha();
occlusionItem = null;
}
}
//没有撞墙
if (!hitWall)
{
newPos.x = Target.transform.position.x;
newPos.z = Target.transform.position.z;
float y = Mathf.SmoothDamp(CameraPosition.position.y, newPos.y, ref currentVelocityY, f_DampTime / 2);
newPos.y = y;
newPos += Main.Ins.LocalPlayer.transform.forward * followDistance;
}
else
{
float y = Mathf.SmoothDamp(CameraPosition.position.y, newPos.y, ref currentVelocityY, f_DampTime / 2);
newPos.y = y;
}
CameraPosition.position = newPos;
vecTarget.x = Target.position.x;
vecTarget.y = Mathf.SmoothDamp(CameraLookAt.position.y, Target.position.y + BodyHeight, ref currentVelocityY2, f_DampTime / 2);
vecTarget.z = Target.position.z;
CameraLookAt.position = vecTarget;
//由电影视角，切换到单人视角之间的动画.
if (animationPlay)
{
if (animationTick >= SmoothDampTime)
{
animationTick = 0.0f;
animationPlay = false;
}
else
{
//当锁定目标丢失，或者死亡时.从双人视角转换为单人视角的摄像机过渡动画.
animationTick += FrameReplay.deltaTime;
Vector3 velocity = currentVelocity;
transform.position = Vector3.SmoothDamp(transform.position, newPos, ref velocity, SmoothDampTime, f_speedMax);
currentVelocity = velocity;
Quaternion to = Quaternion.LookRotation(CameraLookAt.position - transform.position, Vector3.up);
transform.rotation = Quaternion.Lerp(transform.rotation, to, SmoothDampTime);
return;
}
}
else
{
transform.position = CameraPosition.position;
transform.LookAt(CameraLookAt.position, Vector3.up);
}
}
}
