public void Activate()
{
if (!MainV2.comPort.BaseStream.IsOpen)
{
Enabled = false;
return;
}
if (MainV2.comPort.MAV.cs.firmware == Firmwares.ArduCopter2)
{
Enabled = true;
}
else
{
Enabled = false;
return;
}
startup = true;
changes.Clear();
// ensure the fields are populated before setting them
TUNE.setup(
ParameterMetaDataRepository.GetParameterOptionsInt("TUNE", MainV2.comPort.MAV.cs.firmware.ToString())
.ToList(), "TUNE", MainV2.comPort.MAV.param);
CH7_OPTION.setup(new[] { "CH7_OPT", "CH7_OPTION", "RC7_OPTION" }, MainV2.comPort.MAV.param);
CH8_OPTION.setup(new[] { "CH8_OPT", "CH8_OPTION", "RC8_OPTION" }, MainV2.comPort.MAV.param);
CH9_OPTION.setup(new[] { "CH9_OPT", "CH9_OPTION", "RC9_OPTION" }, MainV2.comPort.MAV.param);
CH10_OPTION.setup(new[] { "CH10_OPT", "CH10_OPTION", "RC10_OPTION" }, MainV2.comPort.MAV.param);
TUNE_LOW.setup(0, 10000, 1000, 0.01f, new[] { "TUNE_LOW", "TUNE_MIN" }, MainV2.comPort.MAV.param);
TUNE_HIGH.setup(0, 10000, 1000, 0.01f, new[] { "TUNE_HIGH", "TUNE_MIN" }, MainV2.comPort.MAV.param);
HLD_LAT_P.setup(0, 0, 1, 0.001f, new[] { "HLD_LAT_P", "POS_XY_P", "PSC_POSXY_P" }, MainV2.comPort.MAV.param);
LOITER_LAT_D.setup(0, 0, 1, 0.001f, new[] { "LOITER_LAT_D", "PSC_VELXY_D" }, MainV2.comPort.MAV.param);
LOITER_LAT_I.setup(0, 0, 1, 0.001f, new[] { "LOITER_LAT_I", "VEL_XY_I", "PSC_VELXY_I" }, MainV2.comPort.MAV.param);
LOITER_LAT_IMAX.setup(0, 0, 10, 1f, new[] { "LOITER_LAT_IMAX", "VEL_XY_IMAX", "PSC_VELXY_IMAX" }, MainV2.comPort.MAV.param);
LOITER_LAT_P.setup(0, 0, 1, 0.001f, new[] { "LOITER_LAT_P", "VEL_XY_P", "PSC_VELXY_P" }, MainV2.comPort.MAV.param);
RATE_PIT_D.setup(0, 0, 1, 0.001f, new[] { "RATE_PIT_D", "ATC_RAT_PIT_D" }, MainV2.comPort.MAV.param);
RATE_PIT_I.setup(0, 0, 1, 0.001f, new[] { "RATE_PIT_I", "ATC_RAT_PIT_I" }, MainV2.comPort.MAV.param);
if (MainV2.comPort.MAV.param.ContainsKey("ATC_RAT_PIT_IMAX")) // 3.4 changes scaling
{
RATE_PIT_IMAX.setup(0, 0, 1, 1f, new[] { "ATC_RAT_PIT_IMAX" }, MainV2.comPort.MAV.param);
}
else
{
RATE_PIT_IMAX.setup(0, 0, 10, 1f, new[] { "RATE_PIT_IMAX" }, MainV2.comPort.MAV.param);
}
RATE_PIT_P.setup(0, 0, 1, 0.001f, new[] { "RATE_PIT_P", "ATC_RAT_PIT_P" }, MainV2.comPort.MAV.param);
RATE_PIT_FILT.setup(0, 0, 1, 0.001f, new[] { "RATE_PIT_FILT", "ATC_RAT_PIT_FILT", "ATC_RAT_PIT_FLTE" }, MainV2.comPort.MAV.param);
RATE_RLL_D.setup(0, 0, 1, 0.001f, new[] { "RATE_RLL_D", "ATC_RAT_RLL_D" }, MainV2.comPort.MAV.param);
RATE_RLL_I.setup(0, 0, 1, 0.001f, new[] { "RATE_RLL_I", "ATC_RAT_RLL_I" }, MainV2.comPort.MAV.param);
if (MainV2.comPort.MAV.param.ContainsKey("ATC_RAT_RLL_IMAX")) // 3.4 changes scaling
{
RATE_RLL_IMAX.setup(0, 0, 1, 1f, new[] { "ATC_RAT_RLL_IMAX" }, MainV2.comPort.MAV.param);
}
else
{
RATE_RLL_IMAX.setup(0, 0, 10, 1f, new[] { "RATE_RLL_IMAX" }, MainV2.comPort.MAV.param);
}
RATE_RLL_P.setup(0, 0, 1, 0.001f, new[] { "RATE_RLL_P", "ATC_RAT_RLL_P" }, MainV2.comPort.MAV.param);
RATE_RLL_FILT.setup(0, 0, 1, 0.001f, new[] { "RATE_RLL_FILT", "ATC_RAT_RLL_FILT", "ATC_RAT_RLL_FLTE" }, MainV2.comPort.MAV.param);
RATE_YAW_D.setup(0, 0, 1, 0.001f, new[] { "RATE_YAW_D", "ATC_RAT_YAW_D" }, MainV2.comPort.MAV.param);
RATE_YAW_I.setup(0, 0, 1, 0.001f, new[] { "RATE_YAW_I", "ATC_RAT_YAW_I" }, MainV2.comPort.MAV.param);
if (MainV2.comPort.MAV.param.ContainsKey("ATC_RAT_YAW_IMAX")) // 3.4 changes scaling
{
RATE_YAW_IMAX.setup(0, 0, 1, 1f, new[] { "ATC_RAT_YAW_IMAX" }, MainV2.comPort.MAV.param);
}
else
{
RATE_YAW_IMAX.setup(0, 0, 10, 1f, new[] { "RATE_YAW_IMAX" }, MainV2.comPort.MAV.param);
}
RATE_YAW_P.setup(0, 0, 1, 0.001f, new[] { "RATE_YAW_P", "ATC_RAT_YAW_P" }, MainV2.comPort.MAV.param);
RATE_YAW_FILT.setup(0, 0, 1, 0.001f, new[] { "RATE_YAW_FILT", "ATC_RAT_YAW_FILT", "ATC_RAT_YAW_FLTE" }, MainV2.comPort.MAV.param);
STB_PIT_P.setup(0, 0, 1, 0.001f, new[] { "STB_PIT_P", "ATC_ANG_PIT_P" }, MainV2.comPort.MAV.param);
STB_RLL_P.setup(0, 0, 1, 0.001f, new[] { "STB_RLL_P", "ATC_ANG_RLL_P" }, MainV2.comPort.MAV.param);
STB_YAW_P.setup(0, 0, 1, 0.001f, new[] { "STB_YAW_P", "ATC_ANG_YAW_P" }, MainV2.comPort.MAV.param);
THR_ACCEL_D.setup(0, 0, 1, 0.001f, new[] { "THR_ACCEL_D", "ACCEL_Z_D", "PSC_ACCZ_D" }, MainV2.comPort.MAV.param);
THR_ACCEL_I.setup(0, 0, 1, 0.001f, new[] { "THR_ACCEL_I", "ACCEL_Z_I", "PSC_ACCZ_I" }, MainV2.comPort.MAV.param);
THR_ACCEL_IMAX.setup(0, 0, 10, 1f, new[] { "THR_ACCEL_IMAX", "ACCEL_Z_IMAX", "PSC_ACCZ_IMAX" }, MainV2.comPort.MAV.param);
THR_ACCEL_P.setup(0, 0, 1, 0.001f, new[] { "THR_ACCEL_P", "ACCEL_Z_P", "PSC_ACCZ_P" }, MainV2.comPort.MAV.param);
THR_ALT_P.setup(0, 0, 1, 0.001f, new[] { "THR_ALT_P", "POS_Z_P", "PSC_POSZ_P" }, MainV2.comPort.MAV.param);
THR_RATE_P.setup(0, 0, 1, 0.001f, new[] { "THR_RATE_P", "VEL_Z_P", "PSC_VELZ_P" }, MainV2.comPort.MAV.param);
WPNAV_LOIT_SPEED.setup(0, 0, 1, 0.001f, new[] { "WPNAV_LOIT_SPEED", "LOIT_SPEED" }, MainV2.comPort.MAV.param);
WPNAV_RADIUS.setup(0, 0, 1, 0.001f, "WPNAV_RADIUS", MainV2.comPort.MAV.param);
WPNAV_SPEED.setup(0, 0, 1, 0.001f, "WPNAV_SPEED", MainV2.comPort.MAV.param);
WPNAV_SPEED_DN.setup(0, 0, 1, 0.001f, "WPNAV_SPEED_DN", MainV2.comPort.MAV.param);
WPNAV_SPEED_UP.setup(0, 0, 1, 0.001f, "WPNAV_SPEED_UP", MainV2.comPort.MAV.param);
mavlinkNumericUpDownatc_accel_r_max.setup(0, 0, 1, 0.001f, "ATC_ACCEL_R_MAX", MainV2.comPort.MAV.param);
mavlinkNumericUpDownatc_accel_p_max.setup(0, 0, 1, 0.001f, "ATC_ACCEL_P_MAX", MainV2.comPort.MAV.param);
mavlinkNumericUpDownatc_accel_y_max.setup(0, 0, 1, 0.001f, "ATC_ACCEL_Y_MAX", MainV2.comPort.MAV.param);
mavlinkNumericUpDownatc_input_tc.setup(0, 0, 1, 0.001f, "ATC_INPUT_TC", MainV2.comPort.MAV.param);
// unlock entries if they differ
if (RATE_RLL_P.Value != RATE_PIT_P.Value || RATE_RLL_I.Value != RATE_PIT_I.Value ||
RATE_RLL_D.Value != RATE_PIT_D.Value || RATE_RLL_IMAX.Value != RATE_PIT_IMAX.Value)
{
CHK_lockrollpitch.Checked = false;
}
if (MainV2.comPort.MAV.param["H_SWASH_TYPE"] != null)
{
CHK_lockrollpitch.Checked = false;
}
// add tooltips to all controls
foreach (Control control1 in Controls)
{
foreach (Control control2 in control1.Controls)
{
if (control2 is MavlinkNumericUpDown)
{
var ParamName = ((MavlinkNumericUpDown)control2).ParamName;
toolTip1.SetToolTip(control2,
ParameterMetaDataRepository.GetParameterMetaData(ParamName,
ParameterMetaDataConstants.Description, MainV2.comPort.MAV.cs.firmware.ToString()));
}
if (control2 is MavlinkComboBox)
{
var ParamName = ((MavlinkComboBox)control2).ParamName;
toolTip1.SetToolTip(control2,
ParameterMetaDataRepository.GetParameterMetaData(ParamName,
ParameterMetaDataConstants.Description, MainV2.comPort.MAV.cs.firmware.ToString()));
}
}
}
startup = false;
}
public void Activate()
{
if (!MainV2.comPort.BaseStream.IsOpen)
{
Enabled = false;
return;
}
if (MainV2.comPort.MAV.cs.firmware == MainV2.Firmwares.ArduCopter2)
{
Enabled = true;
}
else
{
Enabled = false;
return;
}
startup = true;
changes.Clear();
// ensure the fields are populated before setting them
TUNE.setup(
ParameterMetaDataRepository.GetParameterOptionsInt("TUNE", MainV2.comPort.MAV.cs.firmware.ToString())
.ToList(), "TUNE", MainV2.comPort.MAV.param);
CH7_OPT.setup(
ParameterMetaDataRepository.GetParameterOptionsInt("CH7_OPT", MainV2.comPort.MAV.cs.firmware.ToString())
.ToList(), "CH7_OPT", MainV2.comPort.MAV.param);
CH8_OPT.setup(
ParameterMetaDataRepository.GetParameterOptionsInt("CH8_OPT", MainV2.comPort.MAV.cs.firmware.ToString())
.ToList(), "CH8_OPT", MainV2.comPort.MAV.param);
TUNE_LOW.setup(0, 10000, 1000, 0.01f, "TUNE_LOW", MainV2.comPort.MAV.param);
TUNE_HIGH.setup(0, 10000, 1000, 0.01f, "TUNE_HIGH", MainV2.comPort.MAV.param);
HLD_LAT_P.setup(0, 0, 1, 0.001f, new[] { "HLD_LAT_P", "POS_XY_P" }, MainV2.comPort.MAV.param);
LOITER_LAT_D.setup(0, 0, 1, 0.001f, "LOITER_LAT_D", MainV2.comPort.MAV.param);
LOITER_LAT_I.setup(0, 0, 1, 0.001f, new[] { "LOITER_LAT_I", "VEL_XY_I" }, MainV2.comPort.MAV.param);
LOITER_LAT_IMAX.setup(0, 0, 10, 1f, new[] { "LOITER_LAT_IMAX", "VEL_XY_IMAX" }, MainV2.comPort.MAV.param);
LOITER_LAT_P.setup(0, 0, 1, 0.001f, new[] { "LOITER_LAT_P", "VEL_XY_P" }, MainV2.comPort.MAV.param);
RATE_PIT_D.setup(0, 0, 1, 0.001f, new[] { "RATE_PIT_D", "ATC_RAT_PIT_D" }, MainV2.comPort.MAV.param);
RATE_PIT_I.setup(0, 0, 1, 0.001f, new[] { "RATE_PIT_I", "ATC_RAT_PIT_I" }, MainV2.comPort.MAV.param);
if (MainV2.comPort.MAV.param.ContainsKey("ATC_RAT_PIT_IMAX")) // 3.4 changes scaling
{
RATE_PIT_IMAX.setup(0, 0, 1, 1f, new[] { "ATC_RAT_PIT_IMAX" }, MainV2.comPort.MAV.param);
}
else
{
RATE_PIT_IMAX.setup(0, 0, 10, 1f, new[] { "RATE_PIT_IMAX" }, MainV2.comPort.MAV.param);
}
RATE_PIT_P.setup(0, 0, 1, 0.001f, new[] { "RATE_PIT_P", "ATC_RAT_PIT_P" }, MainV2.comPort.MAV.param);
RATE_PIT_FILT.setup(0, 0, 1, 0.001f, new[] { "RATE_PIT_FILT", "ATC_RAT_PIT_FILT" }, MainV2.comPort.MAV.param);
RATE_RLL_D.setup(0, 0, 1, 0.001f, new[] { "RATE_RLL_D", "ATC_RAT_RLL_D" }, MainV2.comPort.MAV.param);
RATE_RLL_I.setup(0, 0, 1, 0.001f, new[] { "RATE_RLL_I", "ATC_RAT_RLL_I" }, MainV2.comPort.MAV.param);
if (MainV2.comPort.MAV.param.ContainsKey("ATC_RAT_RLL_IMAX")) // 3.4 changes scaling
{
RATE_RLL_IMAX.setup(0, 0, 1, 1f, new[] { "ATC_RAT_RLL_IMAX" }, MainV2.comPort.MAV.param);
}
else
{
RATE_RLL_IMAX.setup(0, 0, 10, 1f, new[] { "RATE_RLL_IMAX" }, MainV2.comPort.MAV.param);
}
RATE_RLL_P.setup(0, 0, 1, 0.001f, new[] { "RATE_RLL_P", "ATC_RAT_RLL_P" }, MainV2.comPort.MAV.param);
RATE_RLL_FILT.setup(0, 0, 1, 0.001f, new[] { "RATE_RLL_FILT", "ATC_RAT_RLL_FILT" }, MainV2.comPort.MAV.param);
RATE_YAW_D.setup(0, 0, 1, 0.001f, new[] { "RATE_YAW_D", "ATC_RAT_YAW_D" }, MainV2.comPort.MAV.param);
RATE_YAW_I.setup(0, 0, 1, 0.001f, new[] { "RATE_YAW_I", "ATC_RAT_YAW_I" }, MainV2.comPort.MAV.param);
if (MainV2.comPort.MAV.param.ContainsKey("ATC_RAT_YAW_IMAX")) // 3.4 changes scaling
{
RATE_YAW_IMAX.setup(0, 0, 1, 1f, new[] { "ATC_RAT_YAW_IMAX" }, MainV2.comPort.MAV.param);
}
else
{
RATE_YAW_IMAX.setup(0, 0, 10, 1f, new[] { "RATE_YAW_IMAX" }, MainV2.comPort.MAV.param);
}
RATE_YAW_P.setup(0, 0, 1, 0.001f, new[] { "RATE_YAW_P", "ATC_RAT_YAW_P" }, MainV2.comPort.MAV.param);
RATE_YAW_FILT.setup(0, 0, 1, 0.001f, new[] { "RATE_YAW_FILT", "ATC_RAT_YAW_FILT" }, MainV2.comPort.MAV.param);
STB_PIT_P.setup(0, 0, 1, 0.001f, new[] { "STB_PIT_P", "ATC_ANG_PIT_P" }, MainV2.comPort.MAV.param);
STB_RLL_P.setup(0, 0, 1, 0.001f, new[] { "STB_RLL_P", "ATC_ANG_RLL_P" }, MainV2.comPort.MAV.param);
STB_YAW_P.setup(0, 0, 1, 0.001f, new[] { "STB_YAW_P", "ATC_ANG_YAW_P" }, MainV2.comPort.MAV.param);
THR_ACCEL_D.setup(0, 0, 1, 0.001f, new[] { "THR_ACCEL_D", "ACCEL_Z_D" }, MainV2.comPort.MAV.param);
THR_ACCEL_I.setup(0, 0, 1, 0.001f, new[] { "THR_ACCEL_I", "ACCEL_Z_I" }, MainV2.comPort.MAV.param);
THR_ACCEL_IMAX.setup(0, 0, 10, 1f, new[] { "THR_ACCEL_IMAX", "ACCEL_Z_IMAX" }, MainV2.comPort.MAV.param);
THR_ACCEL_P.setup(0, 0, 1, 0.001f, new[] { "THR_ACCEL_P", "ACCEL_Z_P" }, MainV2.comPort.MAV.param);
THR_ALT_P.setup(0, 0, 1, 0.001f, new[] { "THR_ALT_P", "POS_Z_P" }, MainV2.comPort.MAV.param);
THR_RATE_P.setup(0, 0, 1, 0.001f, new[] { "THR_RATE_P", "VEL_Z_P" }, MainV2.comPort.MAV.param);
WPNAV_LOIT_SPEED.setup(0, 0, 1, 0.001f, "WPNAV_LOIT_SPEED", MainV2.comPort.MAV.param);
WPNAV_RADIUS.setup(0, 0, 1, 0.001f, "WPNAV_RADIUS", MainV2.comPort.MAV.param);
WPNAV_SPEED.setup(0, 0, 1, 0.001f, "WPNAV_SPEED", MainV2.comPort.MAV.param);
WPNAV_SPEED_DN.setup(0, 0, 1, 0.001f, "WPNAV_SPEED_DN", MainV2.comPort.MAV.param);
WPNAV_SPEED_UP.setup(0, 0, 1, 0.001f, "WPNAV_SPEED_UP", MainV2.comPort.MAV.param);
// unlock entries if they differ
if (RATE_RLL_P.Value != RATE_PIT_P.Value || RATE_RLL_I.Value != RATE_PIT_I.Value ||
RATE_RLL_D.Value != RATE_PIT_D.Value || RATE_RLL_IMAX.Value != RATE_PIT_IMAX.Value)
{
CHK_lockrollpitch.Checked = false;
}
if (MainV2.comPort.MAV.param["H_SWASH_TYPE"] != null)
{
CHK_lockrollpitch.Checked = false;
}
startup = false;
}