internal Task StopPinAsync(Pin pin)
{
// first check to make sure the higher PWM pins have been disabled first
if (pin.PinNumber == 8 && _mode != PwmPinEnableMode.Pin7Pin8)
{
throw new Exception(
"You must disable PWM functionality on Pin 9 (PWM3) before disabling Pin 8's PWM functionality.");
}
if (pin.PinNumber == 7 && _mode != PwmPinEnableMode.Pin7)
{
throw new Exception(
"You must disable PWM functionality on Pin 8 and 9 (PWM2 and PWM3) before disabling Pin 7's PWM functionality.");
}
switch (pin.PinNumber)
{
case 7:
_mode = PwmPinEnableMode.None;
break;
case 8:
_mode = PwmPinEnableMode.Pin7;
break;
case 9:
_mode = PwmPinEnableMode.Pin7Pin8;
break;
}
return(SendConfigAsync());
}
internal Task StartPinAsync(Pin pin)
{
// first check to make sure the previous PWM pins have been enabled first.
if (pin.PinNumber == 8 && _mode != PwmPinEnableMode.Pin7)
{
throw new Exception(
"You must enable PWM functionality on Pin 7 (PWM1) before you enable PWM functionality on Pin 8 (PWM2).");
}
if (pin.PinNumber == 9 && _mode != PwmPinEnableMode.Pin7Pin8)
{
throw new Exception(
"You must enable PWM functionality on Pin 7 and 8 (PWM1 and PWM2) before you enable PWM functionality on Pin 9 (PWM3).");
}
switch (pin.PinNumber)
{
case 7:
_mode = PwmPinEnableMode.Pin7;
break;
case 8:
_mode = PwmPinEnableMode.Pin7Pin8;
break;
case 9:
_mode = PwmPinEnableMode.Pin7Pin8Pin9;
break;
}
return(SendConfigAsync());
}
internal void StartPin(Pin Pin)
{
// first check to make sure the previous PWM pins have been enabled first.
if(Pin.PinNumber == 8 & mode != PwmPinEnableMode.Pin7)
throw new Exception("You must enable PWM functionality on Pin 8 (PWM1) before you enable PWM functionality on Pin 9 (PWM2). See http://treehopper.io/pwm");
if (Pin.PinNumber == 9 & mode != PwmPinEnableMode.Pin7_Pin8)
throw new Exception("You must enable PWM functionality on Pin 8 and 9 (PWM1 and PWM2) before you enable PWM functionality on Pin 10 (PWM3). See http://treehopper.io/pwm");
switch(Pin.PinNumber)
{
case 7:
mode = PwmPinEnableMode.Pin7;
break;
case 8:
mode = PwmPinEnableMode.Pin7_Pin8;
break;
case 9:
mode = PwmPinEnableMode.Pin7_Pin8_Pin9;
break;
}
SendConfig();
}
internal void StopPin(Pin Pin)
{
// first check to make sure the higher PWM pins have been disabled first
if (Pin.PinNumber == 8 & mode != PwmPinEnableMode.Pin7_Pin8)
throw new Exception("You must disable PWM functionality on Pin 10 (PWM3) before disabling Pin 9's PWM functionality. See http://treehopper.io/pwm");
if (Pin.PinNumber == 7 & mode != PwmPinEnableMode.Pin7)
throw new Exception("You must disable PWM functionality on Pin 9 and 10 (PWM2 and PWM3) before disabling Pin 8's PWM functionality. See http://treehopper.io/pwm");
switch (Pin.PinNumber)
{
case 7:
mode = PwmPinEnableMode.None;
break;
case 8:
mode = PwmPinEnableMode.Pin7;
break;
case 9:
mode = PwmPinEnableMode.Pin7_Pin8;
break;
}
SendConfig();
}
