// Печать всех листов в текущем документе private void multiSheetPlot(Database db) { using (var t = db.TransactionManager.StartTransaction()) { var bt = (BlockTable)t.GetObject(db.BlockTableId, OpenMode.ForRead); var pi = new PlotInfo(); var piv = new PlotInfoValidator(); piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { using (var pe = PlotFactory.CreatePublishEngine()) { var layouts = new List <Layout>(); DBDictionary layoutDict = (DBDictionary)db.LayoutDictionaryId.GetObject(OpenMode.ForRead); foreach (DBDictionaryEntry entry in layoutDict) { if (entry.Key != "Model") { layouts.Add((Layout)t.GetObject(entry.Value, OpenMode.ForRead)); } } layouts.Sort((l1, l2) => l1.LayoutName.CompareTo(l2.LayoutName)); var layoutsToPlot = new ObjectIdCollection(layouts.Select(l => l.BlockTableRecordId).ToArray()); int numSheet = 1; foreach (ObjectId btrId in layoutsToPlot) { var btr = (BlockTableRecord)t.GetObject(btrId, OpenMode.ForRead); var lo = (Layout)t.GetObject(btr.LayoutId, OpenMode.ForRead); var psv = PlotSettingsValidator.Current; pi.Layout = btr.LayoutId; LayoutManager.Current.CurrentLayout = lo.LayoutName; piv.Validate(pi); if (numSheet == 1) { pe.BeginPlot(null, null); string fileName = Path.Combine(Path.GetDirectoryName(db.Filename), Path.GetFileNameWithoutExtension(db.Filename) + ".pdf"); pe.BeginDocument(pi, db.Filename, null, 1, true, fileName); } var ppi = new PlotPageInfo(); pe.BeginPage(ppi, pi, (numSheet == layoutsToPlot.Count), null); pe.BeginGenerateGraphics(null); pe.EndGenerateGraphics(null); // Finish the sheet pe.EndPage(null); numSheet++; } // Finish the document pe.EndDocument(null); } } else { throw new System.Exception("Другое задание на печать уже выполняется."); } t.Commit(); } }
/// <summary> /// 单页打印 /// </summary> /// <param name="layoutId"></param> /// <param name="plotArea"></param> /// <param name="plotDevice"></param> /// <param name="plotCanonicalMeida"></param> /// <param name="plotStyle"></param> /// <param name="saveFilName"></param> public static void PlotSinglePage( ObjectId layoutId, Extents2d plotArea, string plotDevice, string plotCanonicalMeida, string plotStyle, string saveFilName) { if (PlotFactory.ProcessPlotState != ProcessPlotState.NotPlotting) { MessageBox.Show($"当前不能打印,另一个打印任务正在进行中!"); return; } using (Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.LockDocument()) { Layout lo = mFun.m_OpenEntity(layoutId) as Layout; if (LayoutManager.Current.CurrentLayout != lo.LayoutName) { LayoutManager.Current.CurrentLayout = lo.LayoutName; } using (PlotProgressDialog ppd = new PlotProgressDialog(false, 1, false)) { #region 设置进度条信息 #endregion using (PlotEngine pe = PlotFactory.CreatePublishEngine()) { //设置打印配置参数 PlotInfo pi = SetPlotInfo(lo, plotArea, plotDevice, plotCanonicalMeida, plotStyle, true); pe.BeginPlot(ppd, null); pe.BeginDocument(pi, mCommands.Doc.Name, null, 1, true, saveFilName); pe.BeginPage(new PlotPageInfo(), pi, true, null); pe.BeginGenerateGraphics(null); pe.EndGenerateGraphics(null); pe.EndPage(null); pe.EndDocument(null); pe.EndPlot(null); } } } }
public DocumentPlottingProcess(Document document, int pageCount, string plotName) { this.pageCount = pageCount; this.plotName = plotName; backgroundPlot = new SystemVariableShader("BACKGROUNDPLOT", 0); Add(backgroundPlot); docLock = document.LockDocument(); Add(docLock); engine = PlotFactory.CreatePublishEngine(); Add(engine); dialog = new PlotProgressDialog(false, pageCount, true); Add(dialog); }
/// <summary> /// 打印 /// </summary> /// <param name="plotAreaDict"></param> /// <param name="plotDevice"></param> /// <param name="plotCanonicalMeida"></param> /// <param name="plotStyle"></param> /// <param name="saveFileName"></param> /// <returns></returns> public static bool Plot( Dictionary<ObjectId, List<Extents2d>> plotAreaDict, string plotDevice, string plotCanonicalMeida, string plotStyle, string saveFileName ) { bool ret = true; if (plotAreaDict.Count == 0) return true; #region 准备打印区域列表 PlotList Dictionary<Extents2d, ObjectId> PlotList = new Dictionary<Extents2d, ObjectId>(); foreach (KeyValuePair<ObjectId, List<Extents2d>> kv in plotAreaDict) { foreach (Extents2d plotArea in kv.Value) { PlotList.Add(plotArea, kv.Key); } } #endregion if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { #region 设置为前台打印 object BackGroundPlotVar = mFun.m_GetSystemVar("BACKGROUNDPLOT"); mFun.m_SetSystemVar("BACKGROUNDPLOT", 0);//一定要设置成0(前台打印),否则保存PDF文件中一个布局只会有一张图!!!! #endregion using (PlotEngine pe = PlotFactory.CreatePublishEngine()) { PreviewEndPlotStatus stat = MultiPlotOrPreview( pe, false, PlotList, -1, plotAreaDict.Count, plotDevice, plotCanonicalMeida, plotStyle, saveFileName ); ret = stat == PreviewEndPlotStatus.Cancel ? false : true; } mFun.m_SetSystemVar("BACKGROUNDPLOT", BackGroundPlotVar); } else { mCommands.m_ed.WriteMessage("\n其他打印正在进行中!"); } return ret; }
static public void MultiSheetPlot(Document doc, DirectoryInfo diPDF, string panelName) { Editor ed = doc.Editor; Database db = doc.Database; Transaction tr = db.TransactionManager.StartTransaction(); using (tr) { BlockTable bt = (BlockTable)tr.GetObject(db.BlockTableId, OpenMode.ForRead); PlotInfo pi = new PlotInfo(); PlotInfoValidator piv = new PlotInfoValidator(); piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; // A PlotEngine does the actual plotting (can also create one for Preview) if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { PlotEngine pe = PlotFactory.CreatePublishEngine(); using (pe) { // Collect all the paperspace layouts for plotting ObjectIdCollection layoutsToPlot = new ObjectIdCollection(); List <BlockTableRecord> btrListToBeSorted = new List <BlockTableRecord>(); foreach (ObjectId btrId in bt) { BlockTableRecord btr = (BlockTableRecord)tr.GetObject(btrId, OpenMode.ForRead); if (btr.IsLayout && btr.Name.ToUpper() != BlockTableRecord.ModelSpace.ToUpper()) { layoutsToPlot.Add(btrId); } } //Sort the layout by name btrListToBeSorted.Sort((x, y) => string.Compare(x.Name, y.Name)); foreach (BlockTableRecord btr in btrListToBeSorted) { layoutsToPlot.Add(btr.Id); } // Create a Progress Dialog to provide info and allow thej user to cancel PlotProgressDialog ppd = new PlotProgressDialog(false, layoutsToPlot.Count, true); using (ppd) { int numSheet = 1; foreach (ObjectId btrId in layoutsToPlot) { BlockTableRecord btr = (BlockTableRecord)tr.GetObject(btrId, OpenMode.ForWrite); Layout lo = (Layout)tr.GetObject(btr.LayoutId, OpenMode.ForRead); // We need a PlotSettings object based on the layout settings which we then customize PlotSettings ps = new PlotSettings(lo.ModelType); ps.CopyFrom(lo); // The PlotSettingsValidator helps create a valid PlotSettings object PlotSettingsValidator psv = PlotSettingsValidator.Current; // We'll plot the extents, centered and scaled to fit psv.SetPlotType(ps, Autodesk.AutoCAD.DatabaseServices.PlotType.Extents); psv.SetUseStandardScale(ps, true); psv.SetStdScaleType(ps, StdScaleType.ScaleToFit); psv.SetPlotCentered(ps, true); // We'll use the standard PDF, as this supports multiple sheets //Think about changing the DWG To PDF settings to custom value for setting up printing margin //psv.SetPlotConfigurationName(ps,"DWFx ePlot (XPS Compatible).pc3", "ANSI_A_(8.50_x_11.00_Inches)"); //psv.SetPlotConfigurationName(ps, "DWG To PDF_Custom.pc3", "ISO_A4_(210.00_x_297.00_MM)"); psv.SetPlotConfigurationName(ps, "DWG To PDF_Custom.pc3", "ISO_expand_A4_(210.00_x_297.00_MM)"); // We need a PlotInfo object linked to the layout pi.Layout = btr.LayoutId; // Make the layout we're plotting current LayoutManager.Current.CurrentLayout = lo.LayoutName; //Change the name in it ACADFunction.ChangeName(doc, panelName); foreach (ObjectId vpId in lo.GetViewports()) { Viewport vp = (Viewport)tr.GetObject(vpId, OpenMode.ForWrite); vp.StandardScale = StandardScaleType.ScaleToFit; //vp.CustomScale = 10; } // We need to link the PlotInfo to the PlotSettings and then validate it pi.OverrideSettings = ps; piv.Validate(pi); if (numSheet == 1) { ppd.set_PlotMsgString(PlotMessageIndex.DialogTitle, "Custom Plot Progress"); ppd.set_PlotMsgString(PlotMessageIndex.CancelJobButtonMessage, "Cancel Job"); ppd.set_PlotMsgString(PlotMessageIndex.CancelSheetButtonMessage, "Cancel Sheet"); ppd.set_PlotMsgString(PlotMessageIndex.SheetSetProgressCaption, "Sheet Set Progress"); ppd.set_PlotMsgString(PlotMessageIndex.SheetProgressCaption, "Sheet Progress"); ppd.LowerPlotProgressRange = 0; ppd.UpperPlotProgressRange = 100; ppd.PlotProgressPos = 0; // Let's start the plot, at last ppd.OnBeginPlot(); ppd.IsVisible = true; pe.BeginPlot(ppd, null); // We'll be plotting a single document // Let's plot to file pe.BeginDocument(pi, doc.Name, null, 1, true, diPDF.FullName + @"\" + panelName + ".pdf"); } // Which may contain multiple sheets ppd.StatusMsgString = "Plotting " + doc.Name.Substring(doc.Name.LastIndexOf("\\") + 1) + " - sheet " + numSheet.ToString() + " of " + layoutsToPlot.Count.ToString(); ppd.OnBeginSheet(); ppd.LowerSheetProgressRange = 0; ppd.UpperSheetProgressRange = 100; ppd.SheetProgressPos = 0; PlotPageInfo ppi = new PlotPageInfo(); pe.BeginPage(ppi, pi, (numSheet == layoutsToPlot.Count), null); pe.BeginGenerateGraphics(null); ppd.SheetProgressPos = 50; pe.EndGenerateGraphics(null); // Finish the sheet pe.EndPage(null); ppd.SheetProgressPos = 100; ppd.OnEndSheet(); numSheet++; } // Finish the document pe.EndDocument(null); // And finish the plot ppd.PlotProgressPos = 100; ppd.OnEndPlot(); pe.EndPlot(null); } } } else { ed.WriteMessage( "\nAnother plot is in progress." ); } tr.Commit(); } }
public void WindowPlot() { Document doc = Application.DocumentManager.MdiActiveDocument; Editor ed = doc.Editor; Database db = doc.Database; using (var tr = db.TransactionManager.StartTransaction()) { var lt = (LayerTable)tr.GetObject(db.LayerTableId, OpenMode.ForRead); foreach (var ltrId in lt) { bool lockZero = false; if (ltrId != db.Clayer && (lockZero || ltrId != db.LayerZero)) { var ltr = (LayerTableRecord)tr.GetObject(ltrId, OpenMode.ForWrite); if (ltr.Name == "TextDel") { ltr.IsPlottable = false; } } } tr.Commit(); } ed.Regen(); Object SysVarBackPlot = Application.GetSystemVariable("BACKGROUNDPLOT"); Application.SetSystemVariable("BACKGROUNDPLOT", 0); string path = db.Filename; char ch = '\\'; int lastIndexOfChar = path.LastIndexOf(ch); bool printOrient = true; path = path.Substring(0, lastIndexOfChar + 1); int iterationCount; double scale = 1; iterationCount = 0; DataSet printBase = new DataSet("AutocadPrintObject"); System.Data.DataTable drawingTable = new System.Data.DataTable("Drawings"); printBase.Tables.Add(drawingTable); System.Data.DataColumn idColumn = new System.Data.DataColumn("Id", Type.GetType("System.Int32")); idColumn.Unique = true; // столбец будет иметь уникальное значение idColumn.AllowDBNull = false; // не может принимать null idColumn.AutoIncrement = true; // будет автоинкрементироваться idColumn.AutoIncrementSeed = 1; // начальное значение idColumn.AutoIncrementStep = 1; // приращении при добавлении новой строки System.Data.DataColumn nameColumn = new System.Data.DataColumn("Name", Type.GetType("System.String")); System.Data.DataColumn leftPointXColumn = new System.Data.DataColumn("LeftPointX", Type.GetType("System.Double")); leftPointXColumn.DefaultValue = 0; // значение по умолчанию System.Data.DataColumn leftPointYColumn = new System.Data.DataColumn("LeftPointY", Type.GetType("System.Double")); leftPointXColumn.DefaultValue = 0; // значение по умолчанию System.Data.DataColumn rightPointXColumn = new System.Data.DataColumn("RightPointX", Type.GetType("System.Double")); System.Data.DataColumn rightPointYColumn = new System.Data.DataColumn("RightPointY", Type.GetType("System.Double")); //System.Data.DataColumn drawOrientationColumn = new System.Data.DataColumn("drawOrientation", Type.GetType("System.Bool")); drawingTable.Columns.Add(idColumn); drawingTable.Columns.Add(nameColumn); drawingTable.Columns.Add(leftPointXColumn); drawingTable.Columns.Add(leftPointYColumn); drawingTable.Columns.Add(rightPointXColumn); drawingTable.Columns.Add(rightPointYColumn); //drawingTable.Columns.Add(drawOrientationColumn); using (Transaction tr = db.TransactionManager.StartTransaction()) { //Выделяем рамкой с координатами x1, y1, x2, y2 //PromptSelectionResult prRes = ed.GetSelection(); PromptSelectionResult selRes = ed.SelectAll(); if (selRes.Status != PromptStatus.OK) { ed.WriteMessage("\nError! \n"); return; } ObjectId[] idsn = selRes.Value.GetObjectIds(); foreach (ObjectId idn in idsn) { Entity entity = (Entity)tr.GetObject(idn, OpenMode.ForRead); if (entity.Layer == "Print") { DataRow row = drawingTable.NewRow(); row.ItemArray = new object[] { iterationCount, " ", 0, 0, 0, 0 }; drawingTable.Rows.Add(row); Polyline pl = (Polyline)entity; if (pl != null) { int nVertex = pl.NumberOfVertices; // Количество вершин полилинии for (int i = 0; i < nVertex; i++) { Point3d p = pl.GetPoint3dAt(i); // Получаем очередную вершину //ed.WriteMessage("\n\tp[{0}]={1}", i, p); if (i == 0) { //framePointsX[iterationCount] = p.X; drawingTable.Rows[iterationCount][2] = p.X; //framePointsY[iterationCount] = p.Y; drawingTable.Rows[iterationCount][3] = p.Y; //ed.WriteMessage("\n\tp[{0}]={1}{2}", i, x2, y2); } if (i == 2) { //framePointsX1[iterationCount] = p.X; drawingTable.Rows[iterationCount][4] = p.X; //framePointsY1[iterationCount] = p.Y; drawingTable.Rows[iterationCount][5] = p.Y; //ed.WriteMessage("\n\tp[{0}]={1}{2}", i, x3, y3); } } //Point3d x = pl.GetPoint3dAt(0); //Point3d x1 = pl.GetPoint3dAt(2); //ed.WriteMessage("\n\tp[0]={0}, {1}", framePointsX[iterationCount], framePointsY[iterationCount]); //ed.WriteMessage("\n\tp[2]={0}, {1}", framePointsX1[iterationCount], framePointsY1[iterationCount]); //ed.WriteMessage(x2.ToString(), y2.ToString(), "\n", x3.ToString(), y3.ToString(), "\n"); } iterationCount = iterationCount + 1; } } ed.WriteMessage("\n\titerationCount={0}", iterationCount); for (int i = 0; i < iterationCount; i++) { //var selectedBooks = drawingTable.Select("Id < 120"); //foreach (var b in selectedBooks) // ed.WriteMessage("\n\t{0} - {1}", b["id"], b["LeftPointX"]); PromptSelectionResult prRes; double x1 = Convert.ToDouble(drawingTable.Rows[i][2]); double y1 = Convert.ToDouble(drawingTable.Rows[i][3]); double x2 = Convert.ToDouble(drawingTable.Rows[i][4]); double y2 = Convert.ToDouble(drawingTable.Rows[i][5]); printOrient = (Math.Abs(y2 - y1) > Math.Abs(x2 - x1)) ? true : false; //ed.WriteMessage("\n\tPoint1= {0}, {1}", x1, y1); //ed.WriteMessage("\n\tPoint2= {0}, {1}", x2, y2); prRes = ed.SelectCrossingWindow(new Point3d(x1, y1, 0), new Point3d(x2, y2, 0)); if (prRes.Status != PromptStatus.OK) { return; } //Создаем коллекцию выделенных объектов ObjectIdCollection objIds = new ObjectIdCollection(); ObjectId[] objIdArray = prRes.Value.GetObjectIds(); string name = "123"; string PDFname = "123"; //Перебираем все объекты в коллекции foreach (ObjectId id in objIdArray) { //Приводим все объекты к типу object Entity entity = (Entity)tr.GetObject(id, OpenMode.ForRead); //Фильтруем объекты, которые будут переноситься на новый лист if (entity.Layer != "TextDel") { //Добавление нужных объектов objIds.Add(id); } //Ищем в выбранной рамке текст на слое Text if ((entity.GetType() == typeof(DBText)) & (entity.Layer == "Text")) { //Получаем значение объекта DBText на слое Text DBText dt = (DBText)entity; if (dt != null) { //namePrint[iterationCount] = dt.TextString; drawingTable.Rows[i][1] = dt.TextString; //name = path + namePrint[iterationCount] + ".dwg"; name = path + drawingTable.Rows[i][1].ToString() + ".dwg"; PDFname = path + drawingTable.Rows[i][1].ToString() + ".pdf"; } //acad.DocumentManager.MdiActiveDocument.Editor.WriteMessage(string.Format("\nLayer:{0}; Type:{1}; Color: {2},{3},{4}\n", //entity.Layer, entity.GetType().ToString(), entity.Color.Red.ToString(), entity.Color.Green.ToString(), entity.Color.Blue.ToString())); //acad.DocumentManager.MdiActiveDocument.Editor.WriteMessage(name.ToString()); //ed.WriteMessage("\n\tЧертеж {0} распечатан! Полный путь: {1}", namePrint[iterationCount], name); //acad.DocumentManager.MdiActiveDocument.Editor.WriteMessage(name.ToString()); //acad.DocumentManager.MdiActiveDocument.Editor.WriteMessage(path.ToString()); } } using (Database newDb = new Database(true, false)) { db.Wblock(newDb, objIds, Point3d.Origin, DuplicateRecordCloning.Ignore); string FileName = name; newDb.SaveAs(FileName, DwgVersion.Newest); } ed.WriteMessage("\n\tЧертеж {0} сохранен отдельным файлом! Полный путь: {1}", drawingTable.Rows[i][1].ToString(), name); Point3d first = new Point3d(x1, y1, 0); Point3d second = new Point3d(x2, y2, 0); // Перевод координат СК UCS в DCS ResultBuffer rbFrom = new ResultBuffer(new TypedValue(5003, 1)), rbTo = new ResultBuffer(new TypedValue(5003, 2)); double[] firres = new double[] { 0, 0, 0 }; double[] secres = new double[] { 0, 0, 0 }; acedTrans(first.ToArray(), rbFrom.UnmanagedObject, rbTo.UnmanagedObject, 0, firres); acedTrans(second.ToArray(), rbFrom.UnmanagedObject, rbTo.UnmanagedObject, 0, secres); Extents2d window = new Extents2d(firres[0], firres[1], secres[0], secres[1]); BlockTableRecord btr = (BlockTableRecord)tr.GetObject( db.CurrentSpaceId, OpenMode.ForRead ); Layout lo = (Layout)tr.GetObject( btr.LayoutId, OpenMode.ForRead ); PlotInfo pi = new PlotInfo(); pi.Layout = btr.LayoutId; PlotSettings ps = new PlotSettings(lo.ModelType); ps.CopyFrom(lo); PlotSettingsValidator psv = PlotSettingsValidator.Current; psv.SetPlotWindowArea(ps, window); psv.SetPlotType(ps, Autodesk.AutoCAD.DatabaseServices.PlotType.Window); psv.SetUseStandardScale(ps, true); psv.SetStdScaleType(ps, StdScaleType.ScaleToFit); psv.SetPlotPaperUnits(ps, PlotPaperUnit.Millimeters); psv.SetPlotCentered(ps, false); psv.SetPlotRotation(ps, PlotRotation.Degrees000); psv.SetUseStandardScale(ps, false); psv.SetPlotConfigurationName(ps, "DWG To PDF.pc3", "ISO_A0_(841.00_x_1189.00_MM)"); if (printOrient == true) { psv.SetPlotRotation(ps, PlotRotation.Degrees090); psv.SetPlotConfigurationName(ps, "DWG To PDF.pc3", "ISO_expand_A2_(594.00_x_420.00_MM)"); if ((Math.Abs(secres[0] - firres[0]) / 420) > (Math.Abs(secres[1] - firres[1]) / 594)) { scale = (Math.Abs(secres[0] - firres[0]) + 30) / 420; } else { scale = (Math.Abs(secres[1] - firres[1]) + 30) / 594; } psv.SetCustomPrintScale(ps, new CustomScale(1, 1.004 * scale)); } else { psv.SetPlotRotation(ps, PlotRotation.Degrees090); psv.SetPlotConfigurationName(ps, "DWG To PDF.pc3", "ISO_expand_A1_(594.00_x_841.00_MM)"); //psv.SetPlotConfigurationName(ps, "DWG To PDF.pc3", "ISO_expand_A2_(594.00_x_420.00_MM)"); if ((Math.Abs(secres[0] - firres[0]) / 841) > (Math.Abs(secres[1] - firres[1]) / 594)) { scale = (Math.Abs(secres[0] - firres[0]) + 30) / 841; } else { scale = (Math.Abs(secres[1] - firres[1]) + 30) / 594; } psv.SetCustomPrintScale(ps, new CustomScale(1, 1.004 * scale)); } //0.7063020 //1.41428571429 // //psv.SetPlotRotation(ps, printOrient == true ? PlotRotation.Degrees000 : PlotRotation.Degrees090); //psv.SetPlotConfigurationName(ps, "DWG To PDF.pc3", "ISO_A0_(841.00_x_1189.00_MM)"); psv.SetPlotCentered(ps, true); pi.OverrideSettings = ps; PlotInfoValidator piv = new PlotInfoValidator(); piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; piv.Validate(pi); if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { PlotEngine pe = PlotFactory.CreatePublishEngine(); using (pe) { // Создаем Progress Dialog (с возможностью отмены пользователем) PlotProgressDialog ppd = new PlotProgressDialog(false, 1, true); using (ppd) { ppd.set_PlotMsgString( PlotMessageIndex.DialogTitle, "Custom Plot Progress" ); ppd.set_PlotMsgString( PlotMessageIndex.CancelJobButtonMessage, "Cancel Job" ); ppd.set_PlotMsgString( PlotMessageIndex.CancelSheetButtonMessage, "Cancel Sheet" ); ppd.set_PlotMsgString( PlotMessageIndex.SheetSetProgressCaption, "Sheet Set Progress" ); ppd.set_PlotMsgString( PlotMessageIndex.SheetProgressCaption, "Sheet Progress" ); ppd.LowerPlotProgressRange = 0; ppd.UpperPlotProgressRange = 100; ppd.PlotProgressPos = 0; // Начинаем печать ppd.OnBeginPlot(); ppd.IsVisible = true; pe.BeginPlot(ppd, null); pe.BeginDocument( pi, doc.Name, null, 1, true, PDFname ); ppd.OnBeginSheet(); ppd.LowerSheetProgressRange = 0; ppd.UpperSheetProgressRange = 100; ppd.SheetProgressPos = 0; PlotPageInfo ppi = new PlotPageInfo(); pe.BeginPage( ppi, pi, true, null ); pe.BeginGenerateGraphics(null); pe.EndGenerateGraphics(null); pe.EndPage(null); ppd.SheetProgressPos = 100; ppd.OnEndSheet(); // Завершаем работу с документом pe.EndDocument(null); // Завершаем печать ppd.PlotProgressPos = 100; ppd.OnEndPlot(); pe.EndPlot(null); } } } else { ed.WriteMessage( "\nAnother plot is in progress." ); } } } using (var tr = db.TransactionManager.StartTransaction()) { var lt = (LayerTable)tr.GetObject(db.LayerTableId, OpenMode.ForRead); foreach (var ltrId in lt) { bool lockZero = false; if (ltrId != db.Clayer && (lockZero || ltrId != db.LayerZero)) { // Открываем слой для записи var ltr = (LayerTableRecord)tr.GetObject(ltrId, OpenMode.ForWrite); } } tr.Commit(); } }
public void Main() { Document doc = AcAp.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; List <ObjectId> ids = null; LayoutManager layManager = LayoutManager.Current; ObjectId layoutId = layManager.GetLayoutId(layManager.CurrentLayout); //Layout layoutObj = (Layout)tr.GetObject(layoutId, OpenMode.ForRead); Layout layoutObj = layoutId.Open(OpenMode.ForRead) as Layout; PlotSettings plotSettingsObj = new PlotSettings(layoutObj.ModelType); string setName = "Langamer_Plot"; using (var trAddPlotSet = db.TransactionManager.StartTransaction()) { // Adiciona o PlotSetup ao DWG atual ********************************************************************************************** string plotSetDWGName = "Z:\\Lisp\\dwg_plot_setup.dwg"; Database dbPlotSet = new Database(); dbPlotSet.ReadDwgFile(plotSetDWGName, FileOpenMode.OpenForReadAndAllShare, true, ""); using (var trPlotSet = dbPlotSet.TransactionManager.StartTransaction()) { BlockTable btPlotSet = trPlotSet.GetObject(dbPlotSet.BlockTableId, OpenMode.ForWrite) as BlockTable; var btrPlotSet = trPlotSet.GetObject(btPlotSet[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord; Layout loPlotSet = trPlotSet.GetObject(btrPlotSet.LayoutId, OpenMode.ForWrite) as Layout; PlotSettings psPlotSet = new PlotSettings(loPlotSet.ModelType); psPlotSet.CopyFrom(loPlotSet); psPlotSet.AddToPlotSettingsDictionary(db); trPlotSet.Commit(); trAddPlotSet.Commit(); } } using (var tr = db.TransactionManager.StartTransaction()) { BlockTable bt = tr.GetObject(db.BlockTableId, OpenMode.ForWrite) as BlockTable; BlockTableRecord btr = tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord; DBDictionary plotSettingsDic = (DBDictionary)tr.GetObject(db.PlotSettingsDictionaryId, OpenMode.ForRead); if (!plotSettingsDic.Contains(setName)) { return; } ObjectId plotSettingsId = plotSettingsDic.GetAt(setName); //layout type bool bModel = layoutObj.ModelType; plotSettingsObj = tr.GetObject(plotSettingsId, OpenMode.ForRead) as PlotSettings; if (plotSettingsObj.ModelType != bModel) { return; } object backgroundPlot = Application.GetSystemVariable("BACKGROUNDPLOT"); Application.SetSystemVariable("BACKGROUNDPLOT", 0); // Fim: Adiciona o PlotSetup ao DWG atual **************************************************************************************** // Pega todos os POLYLINE do desenho atual ********************************************************************************************** // Cast the BlockTableRecord into IEnumerable<T> collection IEnumerable <ObjectId> b = btr.Cast <ObjectId>(); // Using LINQ statement to select LWPOLYLINE from ModelSpace ids = (from id1 in b where OpenObject(tr, id1) is BlockReference && OpenObject(tr, id1).Layer == "LANG-GR-PRANCHA 1" select id1).ToList <ObjectId>(); // Fim: Pega todos os POLYLINE do desenho atual ********************************************************************************************** foreach (var id in ids) { //ObjectId id = ids[0]; //Polyline objPl = tr.GetObject(id, OpenMode.ForRead) as Polyline; BlockReference objPrancha = tr.GetObject(id, OpenMode.ForRead) as BlockReference; Extents3d bounds = (Extents3d)objPrancha.Bounds.Value; Point2d ptMin = new Point2d(bounds.MinPoint.X, bounds.MinPoint.Y); Point2d ptMax = new Point2d(bounds.MaxPoint.X, bounds.MaxPoint.Y); Extents2d plotWin = new Extents2d(ptMin, ptMax); GetSheetExtents(tr, objPrancha); try { PlotSettingsValidator psv = PlotSettingsValidator.Current; psv.SetPlotWindowArea(plotSettingsObj, plotWin); psv.SetPlotRotation(plotSettingsObj, PlotRotation.Degrees180); //now plot the setup... PlotInfo plotInfo = new PlotInfo(); plotInfo.Layout = layoutObj.ObjectId; plotInfo.OverrideSettings = plotSettingsObj; PlotInfoValidator piv = new PlotInfoValidator(); piv.Validate(plotInfo); string outName = "C:\\Users\\weiglas.ribeiro.LANGAMER\\Desktop\\" + System.DateTime.Now.Millisecond + ".pdf"; using (var pe = PlotFactory.CreatePublishEngine()) { // Begin plotting a document. pe.BeginPlot(null, null); pe.BeginDocument(plotInfo, doc.Name, null, 1, true, outName); // Begin plotting the page PlotPageInfo ppi = new PlotPageInfo(); pe.BeginPage(ppi, plotInfo, true, null); pe.BeginGenerateGraphics(null); pe.EndGenerateGraphics(null); // Finish the sheet pe.EndPage(null); // Finish the document pe.EndDocument(null); //// And finish the plot pe.EndPlot(null); } } catch (Exception er) { } } tr.Commit(); } }
/// <summary> /// 打印预览 /// </summary> /// <returns></returns> public static bool Preview( Dictionary<ObjectId, List<Extents2d>> plotAreaDict, string plotDevice, string plotCanonicalMeida, string plotStyle, string saveFileName, bool isPlotSingle//是否每页单独保存 ) { Database db = HostApplicationServices.WorkingDatabase; Document doc = Application.DocumentManager.MdiActiveDocument; Editor ed = Application.DocumentManager.MdiActiveDocument.Editor; bool ret = false; if (plotAreaDict.Count == 0) return true; #region 准备打印区域列表 PlotList Dictionary<Extents2d, ObjectId> PlotList = new Dictionary<Extents2d, ObjectId>(); foreach (KeyValuePair<ObjectId, List<Extents2d>> kv in plotAreaDict) { foreach (Extents2d plotArea in kv.Value) { PlotList.Add(plotArea, kv.Key); } } #endregion if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { #region 设置为前台打印 //保存App的原参数 short bgPlot = (short)Application.GetSystemVariable("BACKGROUNDPLOT"); //设定为前台打印,加快打印速度 Application.SetSystemVariable("BACKGROUNDPLOT", 0); //object BackGroundPlotVar = mFun.m_GetSystemVar("BACKGROUNDPLOT"); //mFun.m_SetSystemVar("BACKGROUNDPLOT", 0);//一定要设置成0(前台打印),否则保存PDF文件中一个布局只会有一张图!!!! #endregion int sheetNum = 0; bool isFinished = false;//预览是否结束 bool isReadyForPlot = false;//是否准备好打印 while (!isFinished) { PreviewEngineFlags flags = PreviewEngineFlags.Plot; if (sheetNum > 0) flags |= PreviewEngineFlags.PreviousSheet; if (sheetNum < PlotList.Count - 1) flags |= PreviewEngineFlags.NextSheet; using (PlotEngine pe = PlotFactory.CreatePreviewEngine((int)flags)) { PreviewEndPlotStatus stat = MultiPlotOrPreview( pe, true, PlotList, sheetNum, plotAreaDict.Count, plotDevice, plotCanonicalMeida, plotStyle, saveFileName); if (stat == PreviewEndPlotStatus.Next) { sheetNum++; } else if (stat == PreviewEndPlotStatus.Previous) { sheetNum--; } else if (stat == PreviewEndPlotStatus.Normal || stat == PreviewEndPlotStatus.Cancel) { isFinished = true; } else if (stat == PreviewEndPlotStatus.Plot) { isFinished = true; isReadyForPlot = true; ret = true;//结束 } } } // If the plot button was used to exit the preview... if (isReadyForPlot) { if (!isPlotSingle) { using (PlotEngine pe = PlotFactory.CreatePublishEngine()) { PreviewEndPlotStatus stat = MultiPlotOrPreview( pe, false, PlotList, -1, plotAreaDict.Count, plotDevice, plotCanonicalMeida, plotStyle, saveFileName ); ret = stat == PreviewEndPlotStatus.Cancel ? false : true; } } else { #region 每页打印成一个PDF文件 foreach (KeyValuePair<ObjectId, List<Extents2d>> kv in plotAreaDict) { int i = 1; foreach (Extents2d plotArea in kv.Value) { PlotSinglePage( kv.Key, plotArea, plotDevice, plotCanonicalMeida, plotStyle, string.Format("{0}-{1}({2})", saveFileName, wmLayout.GetLayoutName(kv.Key), i++)); } } #endregion } } //恢复变量 Application.SetSystemVariable("BACKGROUNDPLOT", bgPlot); } else { ed.WriteMessage("\n其他打印正在进行中!"); } return ret; }
//打印模型布局的范围 //打印到DWF文件 //[CommandMethod("PlotCurrentLayout")] /// <summary> /// 打印输出单个文件 /// </summary> /// <param name="LayerName"></param> /// <param name="FileName"></param> /// <param name="outputFilePath"></param> /// <param name="printer"></param> /// <param name="paperFormat"></param> public static void PlotCurrentLayout(string LayerName, string FileName, string outputFilePath, string printer, string paperFormat) { // 获取当前文档和数据库,启动事务 Document acDoc = Application.DocumentManager.MdiActiveDocument; Database acCurDb = acDoc.Database; Editor ed = acDoc.Editor; using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction()) { // 获取图层 LayerTable acLyrTbl; acLyrTbl = acTrans.GetObject(acCurDb.LayerTableId, OpenMode.ForRead) as LayerTable; // 将活动图层修改为第一个,即图层0 acCurDb.Clayer = acLyrTbl[LayerName]; LayerTableRecord acLayerTblRec = acTrans.GetObject(acLyrTbl[LayerName], OpenMode.ForWrite) as LayerTableRecord; acLayerTblRec.IsOff = false; //显示该图层 // 引用布局管理器LayoutManager LayoutManager acLayoutMgr; acLayoutMgr = LayoutManager.Current; // 获取当前布局,在命令行窗口显示布局名字 Layout acLayout; acLayout = acTrans.GetObject(acLayoutMgr.GetLayoutId(acLayoutMgr.CurrentLayout), OpenMode.ForRead) as Layout; // 从布局中获取PlotInfo PlotInfo acPlInfo = new PlotInfo(); acPlInfo.Layout = acLayout.ObjectId; // 复制布局中的PlotSettings PlotSettings acPlSet = new PlotSettings(acLayout.ModelType); acPlSet.CopyFrom(acLayout); // 更新PlotSettings对象 PlotSettingsValidator acPlSetVdr = PlotSettingsValidator.Current; //// 获取打印设备 //StringCollection deviceList = acPlSetVdr.GetPlotDeviceList(); //// 打印设备列表-MessageBox形式 //foreach (string d in deviceList) //{ // ed.WriteMessage("打印设备:" + d + "\n"); //} //// 获取纸张列表 //StringCollection mediaList = acPlSetVdr.GetCanonicalMediaNameList(acPlSet); //ed.WriteMessage("图纸种类:" + Convert.ToString(mediaList.Count) + " 个\n"); //foreach (string m in mediaList) //{ // ed.WriteMessage("打印图纸:" + m + "\n"); //} // 设置打印区域 acPlSetVdr.SetPlotType(acPlSet, Autodesk.AutoCAD.DatabaseServices.PlotType.Extents); // 设置打印比例 acPlSetVdr.SetUseStandardScale(acPlSet, true); acPlSetVdr.SetStdScaleType(acPlSet, StdScaleType.ScaleToFit); // 居中打印 acPlSetVdr.SetPlotCentered(acPlSet, true); // 设置使用的打印设备 //acPlSetVdr.SetPlotConfigurationName(acPlSet, "PostScript Level 2.pc3", //"ANSI_A_(8.50_x_11.00_Inches)"); //设置采用的打印设备与纸张格式 acPlSetVdr.SetPlotConfigurationName(acPlSet, printer, paperFormat); // 用上述设置信息覆盖PlotInfo对象, // 不会将修改保存回布局 acPlInfo.OverrideSettings = acPlSet; // 验证打印信息 PlotInfoValidator acPlInfoVdr = new PlotInfoValidator(); acPlInfoVdr.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; acPlInfoVdr.Validate(acPlInfo); // 检查是否有正在处理的打印任务 if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { using (PlotEngine acPlEng = PlotFactory.CreatePublishEngine()) { // 使用PlotProgressDialog对话框跟踪打印进度 PlotProgressDialog acPlProgDlg = new PlotProgressDialog(false, 1, true); using (acPlProgDlg) { // 定义打印开始时显示的状态信息 acPlProgDlg.set_PlotMsgString(PlotMessageIndex.DialogTitle, "Plot Progress"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.CancelJobButtonMessage, "Cancel Job"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.CancelSheetButtonMessage, "Cancel Sheet"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.SheetSetProgressCaption, "Sheet Set Progress"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.SheetProgressCaption, "Sheet Progress"); // 设置打印进度范围 acPlProgDlg.LowerPlotProgressRange = 0; acPlProgDlg.UpperPlotProgressRange = 100; acPlProgDlg.PlotProgressPos = 0; // 显示打印进度对话框 acPlProgDlg.OnBeginPlot(); acPlProgDlg.IsVisible = true; // 开始打印 acPlEng.BeginPlot(acPlProgDlg, null); string opFile = outputFilePath + LayerName; // 定义打印输出 acPlEng.BeginDocument(acPlInfo, acDoc.Name, null, 1, true, opFile); // 显示当前打印任务的有关信息 //acPlProgDlg.set_PlotMsgString(PlotMessageIndex.Status, // "Plotting: " + acDoc.Name + " - " + // acLayout.LayoutName); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.Status, "Plotting: " + acDoc.Name + " - " + LayerName); // 设置图纸进度范围 acPlProgDlg.OnBeginSheet(); acPlProgDlg.LowerSheetProgressRange = 0; acPlProgDlg.UpperSheetProgressRange = 100; acPlProgDlg.SheetProgressPos = 0; // 打印第一张图/布局 PlotPageInfo acPlPageInfo = new PlotPageInfo(); acPlEng.BeginPage(acPlPageInfo, acPlInfo, true, null); acPlEng.BeginGenerateGraphics(null); acPlEng.EndGenerateGraphics(null); // 结束第一张图/布局的打印 acPlEng.EndPage(null); acPlProgDlg.SheetProgressPos = 100; acPlProgDlg.OnEndSheet(); // 结束文档局的打印 acPlEng.EndDocument(null); // 打印结束 acPlProgDlg.PlotProgressPos = 100; acPlProgDlg.OnEndPlot(); acPlEng.EndPlot(null); } } } acLayerTblRec.IsOff = true; //关闭该图层 printFlag = true; //ed.WriteMessage("打印完成 \n"); } }
public void PlotToPDF(string filePath) { if (File.Exists(filePath)) { Application.ShowAlertDialog("File already exists"); return; } Document doc = Application.DocumentManager.MdiActiveDocument; Editor ed = doc.Editor; Database db = doc.Database; Transaction tr = db.TransactionManager.StartTransaction(); using (tr) { // We'll be plotting the current layout Application.DocumentManager.MdiActiveDocument = doc; LayoutManager.Current.CurrentLayout = GetFirstLayout(); BlockTableRecord btr = (BlockTableRecord)tr.GetObject(db.CurrentSpaceId, OpenMode.ForRead); Layout lo = (Layout)tr.GetObject(btr.LayoutId, OpenMode.ForRead); // We need a PlotInfo object // linked to the layout PlotInfo pi = new PlotInfo(); pi.Layout = btr.LayoutId; // We need a PlotSettings object // based on the layout settings // which we then customize PlotSettings ps = new PlotSettings(lo.ModelType); ps.CopyFrom(lo); // The PlotSettingsValidator helps // create a valid PlotSettings object PlotSettingsValidator psv = PlotSettingsValidator.Current; // We'll plot the extents, centered and // scaled to fit psv.SetPlotType( ps, Autodesk.AutoCAD.DatabaseServices.PlotType.Extents ); psv.SetUseStandardScale(ps, true); psv.SetStdScaleType(ps, StdScaleType.ScaleToFit); psv.SetPlotCentered(ps, true); psv.RefreshLists(ps); //psv.SetCurrentStyleSheet(lo, "E:\\Plottefil\\COWI_EL-v00.ctb"); // We'll use the standard DWF PC3, as // for today we're just plotting to file psv.SetPlotConfigurationName( ps, "DWG to PDF.pc3", "ISO_A0_(841.00_x_1189.00_MM)" ); // We need to link the PlotInfo to the // PlotSettings and then validate it pi.OverrideSettings = ps; PlotInfoValidator piv = new PlotInfoValidator(); piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; piv.Validate(pi); // A PlotEngine does the actual plotting // (can also create one for Preview) if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { PlotEngine pe = PlotFactory.CreatePublishEngine(); using (pe) { // Create a Progress Dialog to provide info // and allow the user to cancel PlotProgressDialog ppd = new PlotProgressDialog(true, 1, true); using (ppd) { ppd.set_PlotMsgString( PlotMessageIndex.DialogTitle, "Custom Plot Progress" ); ppd.set_PlotMsgString( PlotMessageIndex.CancelJobButtonMessage, "Cancel Job" ); ppd.set_PlotMsgString( PlotMessageIndex.CancelSheetButtonMessage, "Cancel Sheet" ); ppd.set_PlotMsgString( PlotMessageIndex.SheetSetProgressCaption, "Sheet Set Progress" ); ppd.set_PlotMsgString( PlotMessageIndex.SheetProgressCaption, "Sheet Progress" ); ppd.LowerPlotProgressRange = 0; ppd.UpperPlotProgressRange = 100; ppd.PlotProgressPos = 0; // Let's start the plot, at last ppd.OnBeginPlot(); ppd.IsVisible = true; pe.BeginPlot(ppd, null); // We'll be plotting a single document pe.BeginDocument( pi, doc.Name, null, 1, true, // Let's plot to file filePath); // Which contains a single sheet ppd.OnBeginSheet(); ppd.LowerSheetProgressRange = 0; ppd.UpperSheetProgressRange = 100; ppd.SheetProgressPos = 0; PlotPageInfo ppi = new PlotPageInfo(); pe.BeginPage( ppi, pi, true, null ); pe.BeginGenerateGraphics(null); pe.EndGenerateGraphics(null); // Finish the sheet pe.EndPage(null); ppd.SheetProgressPos = 100; ppd.OnEndSheet(); // Finish the document pe.EndDocument(null); // And finish the plot ppd.PlotProgressPos = 100; ppd.OnEndPlot(); pe.EndPlot(null); } } } else { ed.WriteMessage( "\nAnother plot is in progress." ); } } }
/// <summary> /// plotting method /// </summary> /// <param name="pdfFileName"> name</param> /// <param name="printModel">print param model</param> public static void PlotCurrentLayout(string pdfFileName, PrintModel printModel) { // Get the current document and database, and start a transaction Document acDoc = Application.DocumentManager.MdiActiveDocument; Database acCurDb = acDoc.Database; //short bgPlot = (short)Application.GetSystemVariable("BACKGROUNDPLOT"); Application.SetSystemVariable("BACKGROUNDPLOT", 0); try { using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction()) { // Reference the Layout Manager LayoutManager acLayoutMgr; acLayoutMgr = LayoutManager.Current; // Get the current layout and output its name in the Command Line window Layout acLayout; acLayout = acTrans.GetObject(acLayoutMgr.GetLayoutId(acLayoutMgr.CurrentLayout), OpenMode.ForRead) as Layout; // Get the PlotInfo from the layout PlotInfo acPlInfo = new PlotInfo(); acPlInfo.Layout = acLayout.ObjectId; // Get a copy of the PlotSettings from the layout PlotSettings acPlSet = new PlotSettings(acLayout.ModelType); acPlSet.CopyFrom(acLayout); // Update the PlotSettings object PlotSettingsValidator acPlSetVdr = PlotSettingsValidator.Current; var sheetList = acPlSetVdr.GetPlotStyleSheetList(); //acPlSetVdr.SetCurrentStyleSheet(acPlSet, "monochrome.ctb"); Extents2d points = new Extents2d(printModel.BlockPosition, printModel.BlockDimensions); bool isHor = printModel.IsFormatHorizontal(); //pdfCreator.GetBlockDimensions(); string canonName = printModel.GetCanonNameByWidthAndHeight(); //acDoc.Utility.TranslateCoordinates(point1, acWorld, acDisplayDCS, False); acPlSetVdr.SetPlotWindowArea(acPlSet, points); acPlSetVdr.SetPlotType(acPlSet, Db.PlotType.Window); if (!isHor) { acPlSetVdr.SetPlotRotation(acPlSet, PlotRotation.Degrees090); } //else if(canonName =="ISO_full_bleed_A4_(297.00_x_210.00_MM)") // acPlSetVdr.SetPlotRotation(acPlSet, PlotRotation.Degrees090); else { acPlSetVdr.SetPlotRotation(acPlSet, PlotRotation.Degrees000); } // Set the plot scale acPlSetVdr.SetUseStandardScale(acPlSet, false); acPlSetVdr.SetStdScaleType(acPlSet, StdScaleType.ScaleToFit); // Center the plot acPlSetVdr.SetPlotCentered(acPlSet, true); //acPlSetVdr.SetClosestMediaName(acPlSet,printModel.width,printModel.height,PlotPaperUnit.Millimeters,true); //string curCanonName = PdfCreator.GetLocalNameByAtrrValue(formatValue); acPlSetVdr.SetPlotConfigurationName(acPlSet, "DWG_To_PDF_Uzle.pc3", canonName); //acPlSetVdr.SetCanonicalMediaName(acPlSet, curCanonName); // Set the plot device to use // Set the plot info as an override since it will // not be saved back to the layout acPlInfo.OverrideSettings = acPlSet; // Validate the plot info PlotInfoValidator acPlInfoVdr = new PlotInfoValidator(); acPlInfoVdr.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; acPlInfoVdr.Validate(acPlInfo); // Check to see if a plot is already in progress if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { using (PlotEngine acPlEng = PlotFactory.CreatePublishEngine()) { // Track the plot progress with a Progress dialog PlotProgressDialog acPlProgDlg = new PlotProgressDialog(false, 1, true); using (acPlProgDlg) { // Define the status messages to display when plotting starts acPlProgDlg.set_PlotMsgString(PlotMessageIndex.DialogTitle, "Plot Progress"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.CancelJobButtonMessage, "Cancel Job"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.CancelSheetButtonMessage, "Cancel Sheet"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.SheetSetProgressCaption, "Sheet Set Progress"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.SheetProgressCaption, "Sheet Progress"); // Set the plot progress range acPlProgDlg.LowerPlotProgressRange = 0; acPlProgDlg.UpperPlotProgressRange = 100; acPlProgDlg.PlotProgressPos = 0; // Display the Progress dialog acPlProgDlg.OnBeginPlot(); acPlProgDlg.IsVisible = true; // Start to plot the layout acPlEng.BeginPlot(acPlProgDlg, null); // Define the plot output string filename = Path.Combine(Path.GetDirectoryName(acDoc.Name), pdfFileName); Active.Editor.WriteMessage(filename); acPlEng.BeginDocument(acPlInfo, acDoc.Name, null, 1, true, filename); // Display information about the current plot acPlProgDlg.set_PlotMsgString(PlotMessageIndex.Status, "Plotting: " + acDoc.Name + " - " + acLayout.LayoutName); // Set the sheet progress range acPlProgDlg.OnBeginSheet(); acPlProgDlg.LowerSheetProgressRange = 0; acPlProgDlg.UpperSheetProgressRange = 100; acPlProgDlg.SheetProgressPos = 0; // Plot the first sheet/layout PlotPageInfo acPlPageInfo = new PlotPageInfo(); acPlEng.BeginPage(acPlPageInfo, acPlInfo, true, null); acPlEng.BeginGenerateGraphics(null); acPlEng.EndGenerateGraphics(null); // Finish plotting the sheet/layout acPlEng.EndPage(null); acPlProgDlg.SheetProgressPos = 100; acPlProgDlg.OnEndSheet(); // Finish plotting the document acPlEng.EndDocument(null); // Finish the plot acPlProgDlg.PlotProgressPos = 100; acPlProgDlg.OnEndPlot(); acPlEng.EndPlot(null); } } } } } catch (Exception e) { Application.ShowAlertDialog(e.Message); } }
public void Printing() { while (PlotFactory.ProcessPlotState != ProcessPlotState.NotPlotting) { Thread.Sleep(1000); } using (PlotEngine acPlEng = PlotFactory.CreatePublishEngine()) { // 使用PlotProgressDialog对话框跟踪打印进度 PlotProgressDialog acPlProgDlg = new PlotProgressDialog(false, 1, true); try { using (acPlProgDlg) { // 定义打印开始时显示的状态信息 acPlProgDlg.set_PlotMsgString(PlotMessageIndex.DialogTitle, "Plot Progress"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.CancelJobButtonMessage, "Cancel Job"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.CancelSheetButtonMessage, "Cancel Sheet"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.SheetSetProgressCaption, "Sheet Set Progress"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.SheetProgressCaption, "Sheet Progress"); // 设置打印进度范围 acPlProgDlg.LowerPlotProgressRange = 0; acPlProgDlg.UpperPlotProgressRange = 100; acPlProgDlg.PlotProgressPos = 0; // 显示打印进度对话框 acPlProgDlg.OnBeginPlot(); acPlProgDlg.IsVisible = true; // 开始打印 acPlEng.BeginPlot(acPlProgDlg, null); // 定义打印输出 //if (PdfName.Length > 0) //{ // PdfName = getPdfFileName(acDoc.Name,"", PdfName); //} //else //{ PdfName = GetPdfFileName(acDoc.Name, acLayout.LayoutName, PdfName); //acPlEng.BeginDocument(acPlInfo, acDoc.Name, null, 1, true, Path.GetDirectoryName(acDoc.Name) + "\\" + Path.GetFileNameWithoutExtension(acDoc.Name) + " - " + acLayout.LayoutName + ".pdf"); //} acPlEng.BeginDocument(acPlInfo, acDoc.Name, null, 1, true, PdfName); //acPlEng.BeginDocument(acPlInfo, acDoc.Name, null, 1, true, "c:\\temp\\1.pdf"); // 显示当前打印任务的有关信息 acPlProgDlg.set_PlotMsgString(PlotMessageIndex.Status, "Plotting: " + acDoc.Name + " - " + acLayout.LayoutName); // 设置图纸进度范围 acPlProgDlg.OnBeginSheet(); acPlProgDlg.LowerSheetProgressRange = 0; acPlProgDlg.UpperSheetProgressRange = 100; acPlProgDlg.SheetProgressPos = 0; // 打印第一张图/布局 PlotPageInfo acPlPageInfo = new PlotPageInfo(); acPlEng.BeginPage(acPlPageInfo, acPlInfo, true, null); acPlEng.BeginGenerateGraphics(null); acPlEng.EndGenerateGraphics(null); // 结束第一张图/布局的打印 acPlEng.EndPage(null); acPlProgDlg.SheetProgressPos = 100; acPlProgDlg.OnEndSheet(); // 结束文档局的打印 acPlEng.EndDocument(null); // 打印结束 acPlProgDlg.PlotProgressPos = 100; acPlProgDlg.OnEndPlot(); //acPlEng.EndPlot(null); } } catch (Autodesk.AutoCAD.Runtime.Exception ex) { acEd.WriteMessage("/n Exception message :" + ex.Message); } finally { acPlEng.EndPlot(null); } } }
public static ResultDTO plotTest(string id, string file, string fileID, bool isSnap = false) { try { Document doc = Application.DocumentManager.Open(file, false); Application.DocumentManager.MdiActiveDocument = doc; PlotSettings ps = null; //声明增强型打印设置对象 Layout layout = null; //当前布局对象 bool isTile = AppConfig.GetAppSettings("ViewMode").ToLower().Trim() == "tilepicviewer"; using (Transaction trans = doc.Database.TransactionManager.StartTransaction()) { LayoutManager lm = LayoutManager.Current;//获取当前布局管理器 layout = (Layout)GetLayoutId(doc.Database, lm.CurrentLayout).GetObject(OpenMode.ForRead); ps = new PlotSettings(layout.ModelType); ps.CopyFrom(layout);//从已有打印设置中获取打印设置 //0.更新打印设备、图纸尺寸和打印样式表信息 PlotSettingsValidator validator = PlotSettingsValidator.Current; validator.RefreshLists(ps); //1.设置打印驱动 string plotConfigurationName = AppConfig.GetAppSettings("Printer"); if (isSnap) { plotConfigurationName = "PublishToWeb JPG.pc3"; } validator.SetPlotConfigurationName(ps, plotConfigurationName, null); //2.设置打印纸张 StringCollection cMNameLst = validator.GetCanonicalMediaNameList(ps); string mediaName = AppConfig.GetAppSettings("CanonicalMediaName"); if (isSnap) { mediaName = "VGA (480.00 x 640.00 像素)"; } bool isHas = false; StringCollection canonicalMediaNames = validator.GetCanonicalMediaNameList(ps); foreach (string canonicalMediaName in canonicalMediaNames) { string localeMediaName = validator.GetLocaleMediaName(ps, canonicalMediaName); if (localeMediaName == mediaName) { validator.SetCanonicalMediaName(ps, canonicalMediaName); isHas = true; break; } } if (!isHas) { throw new System.Exception("纸张:" + mediaName + "不存在!"); } //3.设置打印样式表 string plotStyleSheet = AppConfig.GetAppSettings("PlotStyleSheet"); validator.SetCurrentStyleSheet(ps, plotStyleSheet); validator.SetPlotType(ps, Autodesk.AutoCAD.DatabaseServices.PlotType.Extents); validator.SetPlotCentered(ps, true); validator.SetUseStandardScale(ps, true); validator.SetStdScaleType(ps, StdScaleType.ScaleToFit);//设置打印时布满图纸 validator.SetPlotRotation(ps, PlotRotation.Degrees000); trans.Commit(); } PlotConfig config = PlotConfigManager.CurrentConfig; doc = AcadApp.DocumentManager.MdiActiveDocument; Editor ed = doc.Editor; //获取去除扩展名后的文件名(不含路径) string fileName = SymbolUtilityServices.GetSymbolNameFromPathName(doc.Name, "dwg"); //存放在同目录下 var basePath = AppConfig.GetAppSettings("CacheViewFilePath"); if (!basePath.EndsWith("\\")) { basePath += "\\"; } int num = Convert.ToInt32(fileID) / 1000 + 1; string root = basePath + "Dwg\\" + string.Format("{0}", num.ToString("D8")) + "\\"; if (!isTile) { root = Path.Combine(basePath, string.Format("{0}", num.ToString("D8")) + "\\"); } if (!Directory.Exists(@root)) { Directory.CreateDirectory(@root); } fileName = root + id + config.DefaultFileExtension; if (!isTile || isSnap) { fileName = root + fileID + config.DefaultFileExtension; } //为了防止后台打印问题,必须在调用打印API时设置BACKGROUNDPLOT系统变量为0 short backPlot = (short)AcadApp.GetSystemVariable("BACKGROUNDPLOT"); AcadApp.SetSystemVariable("BACKGROUNDPLOT", 0); PlotEngine plotEngine = PlotFactory.CreatePublishEngine(); //创建一个打印引擎 PlotInfo pi = new PlotInfo(); //创建打印信息 pi.Layout = layout.ObjectId; //要打印的布局 pi.OverrideSettings = ps; //使用ps中的打印设置 //验证打印信息是否有效 PlotInfoValidator piv = new PlotInfoValidator(); piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; piv.Validate(pi); PlotPageInfo ppi = new PlotPageInfo(); plotEngine.BeginPlot(null, null); plotEngine.BeginDocument(pi, doc.Name, null, 1, true, fileName); plotEngine.BeginPage(ppi, pi, true, null); plotEngine.BeginGenerateGraphics(null); plotEngine.EndGenerateGraphics(null); plotEngine.EndPage(null); plotEngine.EndDocument(null); plotEngine.EndPlot(null); plotEngine.Destroy();//销毁打印引擎 //恢复BACKGROUNDPLOT系统变量的值 AcadApp.SetSystemVariable("BACKGROUNDPLOT", backPlot); doc.CloseAndDiscard(); if (!File.Exists(fileName)) { throw new System.Exception("打印文件生成失败!"); } ResultDTO reVal = new ResultDTO(); if (isTile && !isSnap)//如果是图片就切图 { var img = new ZoomifyImage(fileName, 1024); img.Zoomify(root + id + "\\"); reVal.status = true; reVal.DirectoryPath = "/" + id + "/"; reVal.ZoomLevel = img.ZoomLevels - 1; } else { reVal.status = true; } try { //强制删除过程打印文件 if (File.Exists(file) && !isSnap) { File.Delete(file); } } catch { } return(reVal); } catch (System.Exception e) { return(new ResultDTO { status = false, ErrInfo = e.Message, FileName = file }); } }
private void PlotExtents() { var printer = "PDF.pc3"; var format = "UserDefinedMetric (1000.00 x 2000.00MM)"; // "ANSI_A_(8.50_x_11.00_Inches)"; var outputFilePath = @"C:\Test\Plot\Plot01\Scripts\dump2.pdf"; using (var tr = _document.Database.TransactionManager.StartTransaction()) { var db = (DBDictionary)tr.GetObject(_document.Database.LayoutDictionaryId, OpenMode.ForRead); var layoutId = db.GetAt(_plotLayoutName); var layout = (Layout)tr.GetObject(layoutId, OpenMode.ForRead); var ps = new PlotSettings(layout.ModelType); ps.CopyFrom(layout); ps.PlotPlotStyles = true; var psv = PlotSettingsValidator.Current; psv.SetDefaultPlotConfig(ps); psv.SetPlotType(ps, Autodesk.AutoCAD.DatabaseServices.PlotType.Extents); //psv.SetPlotWindowArea(ps, new Extents2d(new Point2d(150000, 150000), new Point2d(190000, 150000))); //psv.SetPlotType(ps, Autodesk.AutoCAD.DatabaseServices.PlotType.Window); psv.SetUseStandardScale(ps, true); //psv.SetPlotCentered(ps, true); psv.SetPlotOrigin(ps, new Point2d(10, 10)); psv.SetStdScaleType(ps, StdScaleType.StdScale1To1); var extent2d = ps.PlotPaperMargins; //if (extent2d.MaxPoint.Y > extent2d.MaxPoint.X) //{ // psv.SetPlotRotation(ps, PlotRotation.Degrees000); //} //else //{ // psv.SetPlotRotation(ps, PlotRotation.Degrees090); //} //psv.SetPlotConfigurationName(ps, printer, null); psv.SetPlotConfigurationName(ps, printer, format); psv.SetPlotPaperUnits(ps, PlotPaperUnit.Millimeters); var pi = new PlotInfo(); pi.Layout = layoutId; pi.OverrideSettings = ps; var piv = new PlotInfoValidator(); piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; piv.Validate(pi); using (var pe = PlotFactory.CreatePublishEngine()) using (var ppi = new PlotPageInfo()) { pe.BeginPlot(null, null); pe.BeginDocument(pi, _document.Name, null, 1, true, outputFilePath); pe.BeginPage(ppi, pi, true, null); pe.BeginGenerateGraphics(null); pe.EndGenerateGraphics(null); pe.EndPage(null); pe.EndDocument(null); pe.EndPlot(null); } tr.Commit(); } }
public static void InKhungTen(BlockTableRecord acBlkTblRecSpc, Extents2d PlotArea, string path, string PlotDevice, string CanonicalMediaName) { Document acDoc = Application.DocumentManager.MdiActiveDocument; Database acCurDb = acDoc.Database; //string folder = DirectoryFolder(ac.Database.OriginalFileName); //string filename = DocumentShortName(ac.Database.OriginalFileName) + ".pdf"; //Application.ShowAlertDialog(path); using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction()) { Application.SetSystemVariable("BACKGROUNDPLOT", 0); Layout acLayout = (Layout)acTrans.GetObject(acBlkTblRecSpc.LayoutId, OpenMode.ForRead); PlotInfo acPtInfo = new PlotInfo(); acPtInfo.Layout = acLayout.ObjectId; PlotSettings acPtSet = new PlotSettings(acLayout.ModelType); acPtSet.CopyFrom(acLayout); PlotSettingsValidator acPtSetVlr = PlotSettingsValidator.Current; //acPtSetVlr.SetPlotType(acPtSet, Autodesk.AutoCAD.DatabaseServices.PlotType.Extents); acPtSetVlr.RefreshLists(acPtSet); acPtSetVlr.SetPlotWindowArea(acPtSet, PlotArea); acPtSetVlr.SetPlotType(acPtSet, Autodesk.AutoCAD.DatabaseServices.PlotType.Window); acPtSetVlr.SetUseStandardScale(acPtSet, true); acPtSetVlr.SetStdScaleType(acPtSet, StdScaleType.ScaleToFit); acPtSetVlr.SetPlotCentered(acPtSet, true); acPtSetVlr.SetCurrentStyleSheet(acPtSet, "monochrome.ctb"); //acPtSetVlr.SetPlotConfigurationName(acPtSet, "DWG To PDF.pc3", "ISO_full_bleed_A1_(594.00_x_841.00_MM)"); //acPtSetVlr.SetPlotConfigurationName(acPtSet, "DWG To PDF.pc3", "ISO_A1_(594.00_x_841.00_MM)"); acPtSetVlr.SetPlotConfigurationName(acPtSet, acPlDev, acCanMed); //acPtSetVlr.SetPlotConfigurationName(acPtSet, "DWF6 ePlot.pc3", "ANSI_A_(8.50_x_11.00_Inches)"); acPtInfo.OverrideSettings = acPtSet; LayoutManager.Current.CurrentLayout = acLayout.LayoutName; PlotInfoValidator acPtInfoVlr = new PlotInfoValidator(); acPtInfoVlr.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; acPtInfoVlr.Validate(acPtInfo); //Check if plot in process if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { using (PlotEngine acPtEng = PlotFactory.CreatePublishEngine()) { PlotProgressDialog acPtProgDlg = new PlotProgressDialog(false, 1, true); using (acPtProgDlg) { //Define message when plot start acPtProgDlg.set_PlotMsgString(PlotMessageIndex.DialogTitle, "Plot Process"); acPtProgDlg.set_PlotMsgString(PlotMessageIndex.CancelJobButtonMessage, "Cancel Job"); acPtProgDlg.set_PlotMsgString(PlotMessageIndex.CancelSheetButtonMessage, "Cancel Sheet"); acPtProgDlg.set_PlotMsgString(PlotMessageIndex.SheetSetProgressCaption, "Sheet Set Progress"); acPtProgDlg.set_PlotMsgString(PlotMessageIndex.SheetProgressCaption, "Sheet Process"); //Set the process range acPtProgDlg.LowerPlotProgressRange = 0; acPtProgDlg.UpperPlotProgressRange = 100; acPtProgDlg.PlotProgressPos = 0; //Display the process dialog acPtProgDlg.OnBeginPlot(); acPtProgDlg.IsVisible = true; //Start the layout plot acPtEng.BeginPlot(acPtProgDlg, null); //Define the plot output acPtEng.BeginDocument(acPtInfo, acDoc.Name, null, 1, true, @path); //Display the process message acPtProgDlg.set_PlotMsgString(PlotMessageIndex.Status, "Plotting " + acDoc.Name + " - " + acLayout.LayoutName); //Set the sheet process range acPtProgDlg.OnBeginSheet(); acPtProgDlg.LowerSheetProgressRange = 0; acPtProgDlg.UpperPlotProgressRange = 100; acPtProgDlg.SheetProgressPos = 0; //Plot the first sheet PlotPageInfo acPtPageInfo = new PlotPageInfo(); acPtEng.BeginPage(acPtPageInfo, acPtInfo, true, null); acPtEng.BeginGenerateGraphics(null); acPtEng.EndGenerateGraphics(null); //End plot sheet acPtEng.EndPage(null); acPtProgDlg.SheetProgressPos = 100; acPtProgDlg.OnEndSheet(); //End document acPtEng.EndDocument(null); //End plot acPtProgDlg.PlotProgressPos = 100; acPtProgDlg.OnEndPlot(); acPtEng.EndPlot(null); } } } } }
//// Печать с использованием класса PlotToFileConfig //private void MultiSheetPlot(string dir) //{ // Document doc = Application.DocumentManager.MdiActiveDocument; // Database db = doc.Database; // Application.Publisher.CancelledOrFailedPublishing += Publisher_CancelledOrFailedPublishing; // using (var t = db.TransactionManager.StartTransaction()) // { // var bt = (BlockTable)t.GetObject(db.BlockTableId, OpenMode.ForRead); // if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) // { // var layouts = new List<Layout>(); // DBDictionary layoutDict = (DBDictionary)db.LayoutDictionaryId.GetObject(OpenMode.ForRead); // foreach (DBDictionaryEntry entry in layoutDict) // { // if (entry.Key != "Model") // layouts.Add((Layout)t.GetObject(entry.Value, OpenMode.ForRead)); // } // layouts.Sort((l1, l2) => l1.LayoutName.CompareTo(l2.LayoutName)); // //var layoutsToPlot = new ObjectIdCollection(layouts.Select(l => l.BlockTableRecordId).ToArray()); // Gile.Publish.MultiSheetsPdf gileMultiPdfPublish = new Gile.Publish.MultiSheetsPdf(dir, layouts); // gileMultiPdfPublish.Publish(); // } // else // { // throw new System.Exception("Другое задание на печать уже выполняется."); // } // t.Commit(); // } //} //Печать всех листов в текущем документе private void MultiSheetPlot(string title) { Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; var layoutsToPlot = GetLayouts(db); using (var t = db.TransactionManager.StartTransaction()) { var bt = (BlockTable)t.GetObject(db.BlockTableId, OpenMode.ForRead); var pi = new PlotInfo(); var piv = new PlotInfoValidator(); piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { using (var pe = PlotFactory.CreatePublishEngine()) { using (var ppd = new PlotProgressDialog(false, layoutsToPlot.Count, false)) { int numSheet = 1; foreach (var item in layoutsToPlot) { var psv = PlotSettingsValidator.Current; pi.Layout = item.Value; LayoutManager.Current.CurrentLayout = item.Key; piv.Validate(pi); if (numSheet == 1) { ppd.set_PlotMsgString(PlotMessageIndex.DialogTitle, title); ppd.set_PlotMsgString(PlotMessageIndex.CancelJobButtonMessage, "Отмена"); ppd.set_PlotMsgString(PlotMessageIndex.MessageCanceling, "Отмена печати"); ppd.set_PlotMsgString(PlotMessageIndex.SheetSetProgressCaption, "Печать листов"); ppd.set_PlotMsgString(PlotMessageIndex.SheetProgressCaption, "Печать листа"); ppd.LowerPlotProgressRange = 0; ppd.UpperPlotProgressRange = 100; ppd.PlotProgressPos = 0; ppd.OnBeginPlot(); ppd.IsVisible = true; pe.BeginPlot(ppd, null); string fileName = Path.Combine(Path.GetDirectoryName(doc.Name), Path.GetFileNameWithoutExtension(doc.Name) + ".pdf"); pe.BeginDocument(pi, doc.Name, null, 1, true, fileName); } ppd.OnBeginSheet(); ppd.SheetProgressPos = 0; var ppi = new PlotPageInfo(); pe.BeginPage(ppi, pi, (numSheet == layoutsToPlot.Count), null); pe.BeginGenerateGraphics(null); ppd.SheetProgressPos = 50; pe.EndGenerateGraphics(null); pe.EndPage(null); ppd.SheetProgressPos = 100; ppd.OnEndSheet(); numSheet++; ppd.PlotProgressPos += 100 / layoutsToPlot.Count; } pe.EndDocument(null); ppd.PlotProgressPos = 100; ppd.OnEndPlot(); pe.EndPlot(null); } } } else { throw new System.Exception("Другое задание на печать уже выполняется."); } t.Commit(); } }
public void PrintTT() { Document acDoc = Application.DocumentManager.MdiActiveDocument; Database acCurDb = acDoc.Database; Editor ed = Application.DocumentManager.MdiActiveDocument.Editor; List <String> imagelist = new List <String>(); string directory = @"D:\";//磁盘路径 string MediaName = comboBoxMedia.SelectedItem.ToString().Replace(" ", "_").Replace("毫米", "MM").Replace("英寸", "Inches").Replace("像素", "Pixels"); try { if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction()) { int flag = 0; //获取当前布局管理器变量 LayoutManager acLayoutMgr = LayoutManager.Current; //获取当前布局变量 Layout acLayout = (Layout)acTrans.GetObject(acLayoutMgr.GetLayoutId(acLayoutMgr.CurrentLayout), OpenMode.ForRead); //Layout acLayout = (Layout)acTrans.GetObject(acLayoutMgr.GetLayoutId(acLayoutMgr.CurrentLayout), OpenMode.ForWrite); //获取当前布局的打印信息 PlotInfo acPlInfo = new PlotInfo() { Layout = acLayout.ObjectId }; //提示用户输入打印窗口的两个角点 PromptPointResult resultp = ed.GetPoint("\n指定第一个角点"); if (resultp.Status != PromptStatus.OK) { return; } Point3d basePt = resultp.Value; resultp = ed.GetCorner("指定对角点", basePt); if (resultp.Status != PromptStatus.OK) { return; } Point3d cornerPt = resultp.Value; //选择实体对象 // PromptSelectionOptions result1 = new PromptSelectionOptions(); SelectionFilter frameFilter = new SelectionFilter( new TypedValue[] { new TypedValue(0, "LWPOLYLINE"), new TypedValue(90, 4), new TypedValue(70, 1) }); PromptSelectionResult selectedFrameResult = ed.SelectWindow(basePt, cornerPt, frameFilter); // PromptSelectionResult selectedFrameResult = ed.GetSelection(result1, frameFilter); PromptSelectionResult selectedFrameResult1 = ed.SelectAll(frameFilter); if (selectedFrameResult.Status == PromptStatus.OK) { List <ObjectId> selectedObjectIds = new List <ObjectId>(selectedFrameResult.Value.GetObjectIds()); List <ObjectId> resultObjectIds = new List <ObjectId>(selectedFrameResult.Value.GetObjectIds()); RemoveInnerPLine(acTrans, ref selectedObjectIds, ref resultObjectIds); foreach (ObjectId frameId in resultObjectIds) { Polyline framePline = acTrans.GetObject(frameId, OpenMode.ForRead) as Polyline; framePline.Highlight(); } PlotSettings acPlSet = new PlotSettings(acLayout.ModelType); acPlSet.CopyFrom(acLayout); //着色打印选项,设置按线框进行打印 acPlSet.ShadePlot = PlotSettingsShadePlotType.Wireframe; PlotSettingsValidator acPlSetVdr = PlotSettingsValidator.Current; //打印比例 //用户标准打印 acPlSetVdr.SetUseStandardScale(acPlSet, true); acPlSetVdr.SetStdScaleType(acPlSet, StdScaleType.ScaleToFit); //居中打印 acPlSetVdr.SetPlotCentered(acPlSet, true); //调用GetPlotStyleSheetList之后才可以使用SetCurrentStyleSheet System.Collections.Specialized.StringCollection sc = acPlSetVdr.GetPlotStyleSheetList(); //设置打印样式表 if (comboBoxStyleSheet.SelectedItem.ToString() == "无") { acPlSetVdr.SetCurrentStyleSheet(acPlSet, "acad.ctb"); } else { acPlSetVdr.SetCurrentStyleSheet(acPlSet, comboBoxStyleSheet.SelectedItem.ToString()); } //选择方向 if (radioButtonHorizontal.Checked) { //横向 acPlSetVdr.SetPlotConfigurationName(acPlSet, "DWG To PDF.pc3", MediaName); acPlSetVdr.SetPlotRotation(acPlSet, PlotRotation.Degrees090); } //竖向 if (radioButtonVertical.Checked) { acPlSetVdr.SetPlotConfigurationName(acPlSet, "DWG To PDF.pc3", MediaName);//获取打印图纸尺寸ComboxMedia acPlSetVdr.SetPlotRotation(acPlSet, PlotRotation.Degrees000); } PlotProgressDialog acPlProgDlg = new PlotProgressDialog(false, resultObjectIds.Count, true); string imagename = ""; string[] files = new string[] { }; List <string> listfile = new List <string>(); foreach (var frame in resultObjectIds) { if (!Directory.Exists(directory)) { Directory.CreateDirectory(directory); } flag++; Entity ent = acTrans.GetObject(frame, OpenMode.ForRead) as Entity; imagename = string.Format("{0}-{1}.pdf", frame, flag); //imagelist.Add(directory + imagename); listfile.Add(directory + imagename); //设置是否使用打印样式 acPlSet.ShowPlotStyles = true; //设置打印区域 Extents3d extents3d = ent.GeometricExtents; Extents2d E2d = new Extents2d(extents3d.MinPoint.X, extents3d.MinPoint.Y, extents3d.MaxPoint.X, extents3d.MaxPoint.Y); acPlSetVdr.SetPlotWindowArea(acPlSet, E2d); acPlSetVdr.SetPlotType(acPlSet, Autodesk.AutoCAD.DatabaseServices.PlotType.Window); //重载和保存打印信息 acPlInfo.OverrideSettings = acPlSet; //验证打印信息设置,看是否有误 PlotInfoValidator acPlInfoVdr = new PlotInfoValidator(); acPlInfoVdr.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; acPlInfoVdr.Validate(acPlInfo); while (PlotFactory.ProcessPlotState != ProcessPlotState.NotPlotting) { continue; } #region BackUpCode //保存App的原参数 short bgPlot = (short)Application.GetSystemVariable("BACKGROUNDPLOT"); //设定为前台打印,加快打印速度 Application.SetSystemVariable("BACKGROUNDPLOT", 0); PlotEngine acPlEng1 = PlotFactory.CreatePublishEngine(); // acPlProgDlg.set_PlotMsgString(PlotMessageIndex.DialogTitle, "图片输出"); // acPlProgDlg.set_PlotMsgString(PlotMessageIndex.CancelSheetButtonMessage, "取消输出"); //acPlProgDlg.set_PlotMsgString(PlotMessageIndex.SheetProgressCaption, "输出进度"); acPlProgDlg.LowerPlotProgressRange = 0; acPlProgDlg.UpperPlotProgressRange = 100; acPlProgDlg.PlotProgressPos = 0; acPlProgDlg.OnBeginPlot(); acPlProgDlg.IsVisible = true; acPlEng1.BeginPlot(acPlProgDlg, null); acPlEng1.BeginDocument(acPlInfo, "", null, 1, true, directory + imagename); // acPlProgDlg.set_PlotMsgString(PlotMessageIndex.Status, string.Format("正在输出文件")); acPlProgDlg.OnBeginSheet(); acPlProgDlg.LowerSheetProgressRange = 0; acPlProgDlg.UpperSheetProgressRange = 100; acPlProgDlg.SheetProgressPos = 0; PlotPageInfo acPlPageInfo = new PlotPageInfo(); acPlEng1.BeginPage(acPlPageInfo, acPlInfo, true, null); acPlEng1.BeginGenerateGraphics(null); acPlEng1.EndGenerateGraphics(null); acPlEng1.EndPage(null); acPlProgDlg.SheetProgressPos = 100; acPlProgDlg.OnEndSheet(); acPlEng1.EndDocument(null); acPlProgDlg.PlotProgressPos = 100; acPlProgDlg.OnEndPlot(); acPlEng1.EndPlot(null); acPlEng1.Dispose(); acPlEng1.Destroy(); Application.SetSystemVariable("BACKGROUNDPLOT", bgPlot); #endregion } files = listfile.ToArray(); PlotConfig config = PlotConfigManager.CurrentConfig; //获取去除扩展名后的文件名(不含路径) string fileName = SymbolUtilityServices.GetSymbolNameFromPathName(acDoc.Name, "dwg"); //定义保存文件对话框 PromptSaveFileOptions opt = new PromptSaveFileOptions("文件名") { //保存文件对话框的文件扩展名列表 Filter = "*" + config.DefaultFileExtension + "|*" + config.DefaultFileExtension, DialogCaption = "浏览打印文件", //保存文件对话框的标题 InitialDirectory = @"D:\", //缺省保存目录 InitialFileName = fileName + "-" + acLayout.LayoutName //缺省保存文件名 }; //根据保存对话框中用户的选择,获取保存文件名 PromptFileNameResult result = ed.GetFileNameForSave(opt); if (result.Status != PromptStatus.OK) { return; } fileName = result.StringResult; //string fileName = @"D:\输出.pdf"; PdfDocumentBase docx = PdfDocument.MergeFiles(files); docx.Save(fileName, FileFormat.PDF); System.Diagnostics.Process.Start(fileName); //保存App的原参数 short bgPlot1 = (short)Application.GetSystemVariable("BACKGROUNDPLOT"); //设定为前台打印,加快打印速度 Application.SetSystemVariable("BACKGROUNDPLOT", 0); PlotEngine acPlEng = PlotFactory.CreatePublishEngine(); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.DialogTitle, "图片输出"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.CancelSheetButtonMessage, "取消输出"); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.SheetProgressCaption, "输出进度"); acPlProgDlg.LowerPlotProgressRange = 0; acPlProgDlg.UpperPlotProgressRange = 100; acPlProgDlg.PlotProgressPos = 0; acPlProgDlg.OnBeginPlot(); acPlProgDlg.IsVisible = true; acPlEng.BeginPlot(acPlProgDlg, null); acPlEng.BeginDocument(acPlInfo, "", null, 1, true, directory + imagename); acPlProgDlg.set_PlotMsgString(PlotMessageIndex.Status, string.Format("正在输出文件")); acPlProgDlg.OnBeginSheet(); acPlProgDlg.LowerSheetProgressRange = 0; acPlProgDlg.UpperSheetProgressRange = 100; acPlProgDlg.SheetProgressPos = 0; PlotPageInfo acPlPageInfo1 = new PlotPageInfo(); acPlEng.BeginPage(acPlPageInfo1, acPlInfo, true, null); acPlEng.BeginGenerateGraphics(null); acPlEng.EndGenerateGraphics(null); acPlEng.EndPage(null); acPlProgDlg.SheetProgressPos = 100; acPlProgDlg.OnEndSheet(); acPlEng.EndDocument(null); acPlProgDlg.PlotProgressPos = 100; acPlProgDlg.OnEndPlot(); acPlEng.EndPlot(null); acPlEng.Dispose(); acPlEng.Destroy(); Application.SetSystemVariable("BACKGROUNDPLOT", bgPlot1); acPlProgDlg.Dispose(); acPlProgDlg.Destroy(); for (int i = 0; i < files.Length; i++) { File.Delete(files[i]); } } while (PlotFactory.ProcessPlotState != ProcessPlotState.NotPlotting) { continue; } //MessageBox.Show("打印完成!"); } } else { ed.WriteMessage("\n另一个打印进程正在进行中."); } } catch (System.Exception) { throw; } }
public void PlotToPDF(CptPlotOptions options, string path, string title) { try { Application.SetSystemVariable("BACKGROUNDPLOT", 0); using (var pi = new PlotInfo()) { pi.Layout = layout.ObjectId; using (var ps = new PlotSettings(layout.ModelType)) { ps.CopyFrom(layout); var psv = PlotSettingsValidator.Current; var minpt = options.PlotWindowArea.MinPoint.TransformByTarget(); var maxpt = options.PlotWindowArea.MaxPoint.TransformByTarget(); psv.SetPlotConfigurationName(ps, plotConfig, options.CanonicalMediaName); psv.SetCurrentStyleSheet(ps, options.CurrentStyleSheet); psv.SetPlotWindowArea(ps, new Extents2d(minpt, maxpt)); psv.SetPlotType(ps, PlotType.Window); psv.SetPlotCentered(ps, true); psv.SetPlotPaperUnits(ps, PlotPaperUnit.Millimeters); psv.SetPlotRotation(ps, options.PlotRotation); if (options.ScaleToFit) { psv.SetUseStandardScale(ps, true); psv.SetStdScaleType(ps, StdScaleType.ScaleToFit); } else { psv.SetUseStandardScale(ps, false); psv.SetCustomPrintScale(ps, options.CustomPrintScale); } pi.OverrideSettings = ps; using (var piv = new PlotInfoValidator()) { piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; piv.Validate(pi); using (var pe = PlotFactory.CreatePublishEngine()) { using (var ppd = new PlotProgressDialog(false, 1, false)) { using (var ppi = new PlotPageInfo()) { ppd.LowerPlotProgressRange = 0; ppd.UpperPlotProgressRange = 100; ppd.PlotProgressPos = 0; ppd.OnBeginPlot(); ppd.IsVisible = true; pe.BeginPlot(ppd, null); pe.BeginDocument(pi, layout.Database.OriginalFileName, null, 1, true, path); ppd.set_PlotMsgString(PlotMessageIndex.DialogTitle, title); ppd.OnBeginSheet(); ppd.LowerSheetProgressRange = 0; ppd.UpperSheetProgressRange = 100; ppd.SheetProgressPos = 0; pe.BeginPage(ppi, pi, true, null); pe.BeginGenerateGraphics(null); ppd.SheetProgressPos = 99; pe.EndGenerateGraphics(null); pe.EndPage(null); ppd.SheetProgressPos = 100; ppd.OnEndSheet(); pe.EndDocument(null); ppd.PlotProgressPos = 100; ppd.OnEndPlot(); pe.EndPlot(null); } } } } } } } catch (Exception ex) { throw ex; } finally { Application.SetSystemVariable("BACKGROUNDPLOT", defaultbkpltVar); } }
public static void PlotLayout(this Document document, Transaction tr, Layout layout, PlotParameters plotParameters) { var ps = new PlotSettings(layout.ModelType); ps.CopyFrom(layout); ps.PlotPlotStyles = true; var psv = PlotSettingsValidator.Current; psv.SetDefaultPlotConfig(ps); psv.SetPlotType(ps, Autodesk.AutoCAD.DatabaseServices.PlotType.Extents); psv.SetUseStandardScale(ps, true); psv.SetPlotOrigin(ps, plotParameters.PaperFormat.PlotOrigin); // psv.SetPlotRotation(ps, PlotRotation.Degrees090); if (plotParameters.PaperFormat.ShrinkDrawing) { psv.SetStdScaleType(ps, StdScaleType.ScaleToFit); //psv.SetUseStandardScale(ps, false); //psv.SetStdScale(ps, 2); //var Scale = new CustomScale(1, 0.5); //psv.SetCustomPrintScale(ps, Scale); } else { psv.SetStdScaleType(ps, StdScaleType.StdScale1To1); } psv.SetPlotConfigurationName(ps, plotParameters.Pc3Name, plotParameters.PaperFormat.CanonicalMediaName); psv.SetPlotPaperUnits(ps, PlotPaperUnit.Millimeters); var pi = new PlotInfo(); pi.Layout = layout.ObjectId; pi.OverrideSettings = ps; var piv = new PlotInfoValidator(); piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled; piv.Validate(pi); var d = Path.GetDirectoryName(plotParameters.OutputFilePath); if (!Directory.Exists(d)) { Directory.CreateDirectory(d); } using (var pe = PlotFactory.CreatePublishEngine()) using (var ppi = new PlotPageInfo()) { pe.BeginPlot(null, null); pe.BeginDocument(pi, document.Name, null, 1, plotParameters.PlotToFile, plotParameters.OutputFilePath); pe.BeginPage(ppi, pi, true, null); pe.BeginGenerateGraphics(null); pe.EndGenerateGraphics(null); pe.EndPage(null); pe.EndDocument(null); pe.EndPlot(null); } tr.Commit(); }
// A PlotEngine does the actual plotting // (can also create one for Preview) //***NOTE- always be sure that back ground plotting is off, in code and the users computer. static void plotEngine(PlotInfo pi, string name, Document doc, Editor ed, bool pdfout) { if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { PlotEngine pe = PlotFactory.CreatePublishEngine(); using (pe) { // Create a Progress Dialog to provide info or allow the user to cancel PlotProgressDialog ppd = new PlotProgressDialog(false, 1, true); using (ppd) { ppd.set_PlotMsgString(PlotMessageIndex.DialogTitle, "Custom Plot Progress"); ppd.set_PlotMsgString(PlotMessageIndex.CancelJobButtonMessage, "Cancel Job"); ppd.set_PlotMsgString(PlotMessageIndex.CancelSheetButtonMessage, "Cancel Sheet"); ppd.set_PlotMsgString(PlotMessageIndex.SheetSetProgressCaption, "Sheet Set Progress"); ppd.set_PlotMsgString(PlotMessageIndex.SheetProgressCaption, "Sheet Progress"); ppd.LowerPlotProgressRange = 0; ppd.UpperPlotProgressRange = 100; ppd.PlotProgressPos = 0; // Let's start the plot, at last ppd.OnBeginPlot(); ppd.IsVisible = true; pe.BeginPlot(ppd, null); // We'll be plotting a single document //name should be file location + prompeted answer string fileLoc = Path.GetDirectoryName(doc.Name); pe.BeginDocument(pi, doc.Name, null, 1, pdfout, fileLoc + @"\" + name); // Which contains a single sheet ppd.OnBeginSheet(); ppd.LowerSheetProgressRange = 0; ppd.UpperSheetProgressRange = 100; ppd.SheetProgressPos = 0; PlotPageInfo ppi = new PlotPageInfo(); pe.BeginPage(ppi, pi, true, null); pe.BeginGenerateGraphics(null); pe.EndGenerateGraphics(null); // Finish the sheet pe.EndPage(null); ppd.SheetProgressPos = 100; ppd.OnEndSheet(); // Finish the document pe.EndDocument(null); // And finish the plot ppd.PlotProgressPos = 100; ppd.OnEndPlot(); pe.EndPlot(null); } } } else { ed.WriteMessage("\nAnother plot is in progress."); } }
static public void ExportPDF() { var doc = AcApp.DocumentManager.MdiActiveDocument; var ed = doc.Editor; ExportForm exportForm = new ExportForm(); var result = AcApp.ShowModalDialog(exportForm); if (result == DialogResult.Cancel) { ed.WriteMessage($"{Environment.NewLine}The operation has been canceled by the user."); return; } int layoutCount = exportForm.SelectedLayouts.Count; ed.WriteMessage($"{Environment.NewLine}Number of selected layouts: {layoutCount}"); if (layoutCount == 0) { ed.WriteMessage($"{Environment.NewLine}No layouts were detected."); return; } else if (layoutCount == 1) { if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { // First we preview... PreviewEndPlotStatus stat; PlotEngine pre = PlotFactory.CreatePreviewEngine((int)PreviewEngineFlags.Plot); using (pre) { stat = PlotOrPreview(pre, true, exportForm.SelectedLayouts[0].BlockTableRecordId, "", ""); } if (stat == PreviewEndPlotStatus.Plot) { // And if the user asks, we plot... var jobNumber = Path.GetFileNameWithoutExtension(doc.Name); if (jobNumber.Length > 9) { jobNumber = jobNumber.Remove(9); } if (!JobNumber.TryParse(jobNumber)) { ed.WriteMessage("Job number could not be determined." + Environment.NewLine); return; } string path = JobNumber.GetPath(jobNumber); if (Directory.Exists(path)) { if (!Directory.Exists(path + "\\Submittals")) { Directory.CreateDirectory(path + "\\Submittals"); } PlotEngine ple = PlotFactory.CreatePublishEngine(); PlotOrPreview(ple, false, exportForm.SelectedLayouts[0].BlockTableRecordId, path + "\\Submittals", jobNumber); ed.WriteMessage($"{Environment.NewLine}Plot created."); } else { ed.WriteMessage("Project folder could not be determined." + Environment.NewLine); } } } else { ed.WriteMessage( "\nAnother plot is in progress." ); } } else { ObjectIdCollection layouts = new ObjectIdCollection(); foreach (Layout layout in exportForm.SelectedLayouts) { layouts.Add(layout.BlockTableRecordId); } if (PlotFactory.ProcessPlotState == ProcessPlotState.NotPlotting) { int layoutNum = 0; bool isFinished = false; bool isReadyForPlot = false; while (!isFinished) { // Create the preview engine with the appropriate // buttons enabled - this depends on which // layout in the list is being previewed PreviewEngineFlags flags = PreviewEngineFlags.Plot; if (layoutNum > 0) { flags |= PreviewEngineFlags.PreviousSheet; } if (layoutNum < layouts.Count - 1) { flags |= PreviewEngineFlags.NextSheet; } using (PlotEngine pre = PlotFactory.CreatePreviewEngine((int)flags)) { PreviewEndPlotStatus stat = MultiplePlotOrPreview( pre, true, layouts, layoutNum, "", "" ); // We're not checking the list bounds for // next/previous as the buttons are only shown // when they can be used if (stat == PreviewEndPlotStatus.Next) { layoutNum++; } else if (stat == PreviewEndPlotStatus.Previous) { layoutNum--; } else if (stat == PreviewEndPlotStatus.Normal || stat == PreviewEndPlotStatus.Cancel) { isFinished = true; } else if (stat == PreviewEndPlotStatus.Plot) { isFinished = true; isReadyForPlot = true; } } } // If the plot button was used to exit the preview... if (isReadyForPlot) { var jobNumber = Path.GetFileNameWithoutExtension(doc.Name); if (jobNumber.Length > 9) { jobNumber = jobNumber.Remove(9); } if (!JobNumber.TryParse(jobNumber)) { ed.WriteMessage("Job number could not be determined." + Environment.NewLine); return; } string path = JobNumber.GetPath(jobNumber); if (Directory.Exists(path)) { if (!Directory.Exists(path + "\\Submittals")) { Directory.CreateDirectory(path + "\\Submittals"); } using (PlotEngine ple = PlotFactory.CreatePublishEngine()) { PreviewEndPlotStatus stat = MultiplePlotOrPreview(ple, false, layouts, -1, path + "\\Submittals", jobNumber); } } } } else { ed.WriteMessage( "\nAnother plot is in progress." ); } } exportForm.Dispose(); }