示例#1
0
 public void setup_dir_pin(PinParams pin_parameters)
 {
     if (pin_parameters.chip != this._mcu)
     {
         throw new PinsException("Stepper dir pin must be on same mcu as step pin");
     }
     this._dir_pin    = pin_parameters.pin;
     this._invert_dir = pin_parameters.invert;
 }
示例#2
0
文件: Mcu_adc.cs 项目: Benkei/klipper
 public Mcu_adc(Mcu mcu, PinParams pin_parameters)
 {
     this._mcu          = mcu;
     this._pin          = pin_parameters.pin;
     this._min_sample   = 0.0;
     this._sample_time  = 0.0;
     this._sample_count = 0;
     this._report_clock = 0;
     this._oid          = 0;
     this._mcu.register_config_callback(this._build_config);
     this._inv_max_adc = 0.0;
 }
示例#3
0
 public Mcu_digital_out(Mcu mcu, PinParams pin_params)
 {
     _mcu = mcu;
     _oid = 0;
     _mcu.register_config_callback(_build_config);
     _pin          = pin_params.pin;
     _invert       = pin_params.invert;
     _start_value  = _invert;
     _is_static    = false;
     _max_duration = 2.0;
     _last_clock   = 0;
 }
示例#4
0
 public Mcu_endstop(Mcu mcu, PinParams pin_parameters)
 {
     _mcu      = mcu;
     _steppers = new List <Mcu_stepper>();
     _pin      = pin_parameters.pin;
     _pullup   = pin_parameters.pullup;
     _invert   = pin_parameters.invert;
     _oid      = 0;
     _mcu.register_config_callback(_build_config);
     _homing                = false;
     _min_query_time        = 0.0;
     _next_query_print_time = 0.0;
     _last_state            = new Dictionary <string, object>();
 }
示例#5
0
文件: Mcu_pwm.cs 项目: Benkei/klipper
 public Mcu_pwm(Mcu mcu, PinParams pin_params)
 {
     _mcu          = mcu;
     _hardware_pwm = false;
     _cycle_time   = 0.1;
     _max_duration = 2.0;
     _oid          = 0;
     _mcu.register_config_callback(this._build_config);
     _pin         = pin_params.pin;
     _invert      = pin_params.invert;
     _start_value = this._shutdown_value = pin_params.invert ? 1 : 0;
     _is_static   = false;
     _last_clock  = 0;
     _pwm_max     = 0.0;
     _set_cmd     = null;
 }
示例#6
0
        // Config creation helpers
        public T setup_pin <T>(string pin_type, PinParams pin_params) where T : class
        {
            switch (pin_type)
            {
            case "stepper": return((T)(object)new Mcu_stepper(this, pin_params));

            case "endstop": return((T)(object)new Mcu_endstop(this, pin_params));

            case "digital_out": return((T)(object)new Mcu_digital_out(this, pin_params));

            case "pwm": return((T)(object)new Mcu_pwm(this, pin_params));

            case "adc": return((T)(object)new Mcu_adc(this, pin_params));

            default:
                throw new PinsException($"pin type {pin_type} not supported on mcu");
            }
        }
示例#7
0
 public Mcu_stepper(Mcu mcu, PinParams pin_parameters)
 {
     this._mcu = mcu;
     this._oid = this._mcu.create_oid();
     this._mcu.register_config_callback(this._build_config);
     this._step_pin            = pin_parameters.pin;
     this._invert_step         = pin_parameters.invert;
     this._dir_pin             = null;
     this._mcu_position_offset = 0.0;
     this._step_dist           = 0.0;
     this._min_stop_interval   = 0.0;
     this._reset_cmd_id        = 0;
     this._get_position_cmd    = null;
     //var _tup_1 = chelper.get_ffi();
     //var ffi_main = _tup_1.Item1;
     //this._ffi_lib = _tup_1.Item2;
     //this._stepqueue = ffi_main.gc(this._ffi_lib.stepcompress_alloc(this._oid), this._ffi_lib.stepcompress_free);
     this._stepqueue = new stepcompress((uint)this._oid);
     this._mcu.register_stepqueue(this._stepqueue);
     this._stepper_kinematics = null;
     this.set_ignore_move(false);
 }