//private Circle ReadEsfera(ref ParCodigoValor code)
//{
// var circle = new Circle();
// Vector3f center = Vector3f.Zero;
// Vector3f normal = Vector3f.UnitZ;
// Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
// code = this.ReadCodePair();
// while (code.Code != 0)
// {
// switch (code.Code)
// {
// case 5:
// circle.Handle = code.Value;
// code = this.ReadCodePair();
// break;
// case 8: //layer code
// circle.Layer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
// case 62: //aci color code
// circle.Color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
// case 6: //type line code
// circle.LineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
// case 10:
// center.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 20:
// center.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 30:
// center.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 40:
// circle.Radius = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 39:
// circle.Thickness = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 210:
// normal.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 220:
// normal.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 230:
// normal.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
// default:
// if (code.Code >= 1000 && code.Code <= 1071)
// throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
// "The extended data of an entity must start with the application registry code " + this.fileLine);
// code = this.ReadCodePair();
// break;
// }
// }
// circle.XData = xData;
// circle.Center = center;
// circle.Normal = normal;
// return circle;
//}
private Elipse ReadElipse(ref ParCodigoValor code)
{
var ellipse = new Elipse();
Vector3f center = Vector3f.Nulo;
Vector3f axisPoint = Vector3f.Nulo;
Vector3f normal = Vector3f.UnitarioZ;
float ratio = 0;
//Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
code = this.ReadCodePair();
while (code.Cod != 0)
{
switch (code.Cod)
{
case 5:
ellipse.Handle = code.Val;
code = this.ReadCodePair();
break;
//case 8: //layer code
// ellipse.Layer = this.GetLayer(code.Val);
// code = this.ReadCodePair();
// break;
//case 62: //aci color code
// ellipse.Color = new AciColor(short.Parse(code.Val));
// code = this.ReadCodePair();
// break;
//case 6: //type line code
// ellipse.LineType = this.GetLineType(code.Val);
// code = this.ReadCodePair();
// break;
case 10:
center.X = float.Parse(code.Val);
code = this.ReadCodePair();
break;
case 20:
center.Y = float.Parse(code.Val);
code = this.ReadCodePair();
break;
case 30:
center.Z = float.Parse(code.Val);
code = this.ReadCodePair();
break;
case 11:
axisPoint.X = float.Parse(code.Val);
code = this.ReadCodePair();
break;
case 21:
axisPoint.Y = float.Parse(code.Val);
code = this.ReadCodePair();
break;
case 31:
axisPoint.Z = float.Parse(code.Val);
code = this.ReadCodePair();
break;
case 40:
ratio = float.Parse(code.Val);
code = this.ReadCodePair();
break;
case 41:
ellipse.AnguloInicio = (float)(double.Parse(code.Val) * MathHelper.RadToDeg);
code = this.ReadCodePair();
break;
case 42:
ellipse.AnguloFin = (float)(double.Parse(code.Val) * MathHelper.RadToDeg);
code = this.ReadCodePair();
break;
case 210:
normal.X = float.Parse(code.Val);
code = this.ReadCodePair();
break;
case 220:
normal.Y = float.Parse(code.Val);
code = this.ReadCodePair();
break;
case 230:
normal.Z = float.Parse(code.Val);
code = this.ReadCodePair();
break;
//case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
default:
if (code.Cod >= 1000 && code.Cod <= 1071)
throw new DxfInvalidCodeValueEntityException(code.Cod, code.Val, this.archivo,
"The extended data of an entity must start with the application registry code " + this.fileLine);
code = this.ReadCodePair();
break;
}
}
Vector3d ocsAxisPoint = MathHelper.Transform((Vector3d)axisPoint,
(Vector3d)normal,
MathHelper.CoordinateSystem.World,
MathHelper.CoordinateSystem.Object);
double rotacion = (float)Vector2d.AngleBetween(Vector2d.UnitarioX, new Vector2d(ocsAxisPoint.X, ocsAxisPoint.Y));
ellipse.EjeMayor = 2 * axisPoint.Modulus();
ellipse.EjeMenor = ellipse.EjeMayor * ratio;
ellipse.Rotacion = (float)(rotacion * MathHelper.RadToDeg);
ellipse.Centro = center;
ellipse.Normal = normal;
//ellipse.XData = xData;
return ellipse;
}
private Vertex ReadVertex(ref ParCodigoValor cod)
{
string handle = string.Empty;
//Layer layer = Layer.Default;
//AciColor color = AciColor.ByLayer;
//LineType lineType = LineType.ByLayer;
Vector3f location = new Vector3f();
//Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
float endThickness = 0.0f;
float beginThickness = 0.0f;
float bulge = 0.0f;
List<int> vertexIndexes = new List<int>();
VertexTypeFlags flags = VertexTypeFlags.PolylineVertex;
cod = this.ReadCodePair();
while (cod.Cod != 0)
{
switch (cod.Cod)
{
case 5:
handle = cod.Val;
cod = this.ReadCodePair();
break;
//case 8:
// layer = this.GetLayer(cod.Val);
// code = this.ReadCodePair();
// break;
//case 62:
// color = new AciColor(short.Parse(cod.Val));
// code = this.ReadCodePair();
// break;
//case 6:
// lineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
case 10:
location.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 20:
location.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 30:
location.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 40:
beginThickness = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 41:
endThickness = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 42:
bulge = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 70:
flags = (VertexTypeFlags)int.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 71:
vertexIndexes.Add(int.Parse(cod.Val));
cod = this.ReadCodePair();
break;
case 72:
vertexIndexes.Add(int.Parse(cod.Val));
cod = this.ReadCodePair();
break;
case 73:
vertexIndexes.Add(int.Parse(cod.Val));
cod = this.ReadCodePair();
break;
case 74:
vertexIndexes.Add(int.Parse(cod.Val));
cod = this.ReadCodePair();
break;
//case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
default:
if (cod.Cod >= 1000 && cod.Cod <= 1071)
throw new DxfInvalidCodeValueEntityException(cod.Cod, cod.Val, this.archivo,
"The extended data of an entity must start with the application registry code " + this.fileLine);
cod = this.ReadCodePair();
break;
}
}
return new Vertex
{
Flags = flags,
Location = location,
BeginThickness = beginThickness,
Bulge = bulge,
//Color = color,
EndThickness = endThickness,
//Layer = layer,
//LineType = lineType,
VertexIndexes = vertexIndexes.ToArray(),
//XData = xData,
Handle = handle
};
}
//private double toRadian(float degreeAngle)
//{
// double radian, degree;
// degree = Convert.ToDouble(degreeAngle);
// radian = (degree * Math.PI) / 180;
// return radian;
//}
private Circulo ReadCirculo(ref ParCodigoValor cod)
{
var circulo = new Circulo();
Vector3f centro = Vector3f.Nulo;
Vector3f normal = Vector3f.UnitarioZ;
//Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
cod = this.ReadCodePair();
while (cod.Cod != 0)
{
switch (cod.Cod)
{
case 5:
circulo.Handle = cod.Val;
cod = this.ReadCodePair();
break;
//case 8: //layer code
// circle.Layer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
//case 62: //aci color code
// circle.Color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
//case 6: //type line code
// circle.LineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
case 10:
centro.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 20:
centro.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 30:
centro.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 40:
circulo.Radio = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
//case 39:
// circulo.Thickness = float.Parse(cod.Val);
// cod = this.ReadCodePair();
// break;
case 210:
normal.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 220:
normal.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 230:
normal.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
//case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
default:
if (cod.Cod >= 1000 && cod.Cod <= 1071)
throw new DxfInvalidCodeValueEntityException(cod.Cod, cod.Val, this.archivo,
"The extended data of an entity must start with the application registry code " + this.fileLine);
cod = this.ReadCodePair();
break;
}
}
//circulo.XData = xData;
circulo.Centro = centro;
circulo.Normal = normal;
return circulo;
}
private void ReadUnknowEntity(ref ParCodigoValor cod)
{
cod = this.ReadCodePair();
while (cod.Cod != 0)
{
cod = this.ReadCodePair();
}
}
private IPolilinea ReadPolilinea(ref ParCodigoValor cod)
{
string handle = string.Empty;
//Layer layer = Layer.Default;
//AciColor color = AciColor.ByLayer;
//LineType lineType = LineType.ByLayer;
PolylineTypeFlags flags = PolylineTypeFlags.OpenPolyline;
float elevation = 0.0f;
float thickness = 0.0f;
Vector3f normal = Vector3f.UnitarioZ;
List<Vertex> vertexes = new List<Vertex>();
//Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
//int numVertexes = -1;
//int numFaces = -1;
cod = this.ReadCodePair();
while (cod.Cod != 0)
{
switch (cod.Cod)
{
case 5:
handle = cod.Val;
cod = this.ReadCodePair();
break;
//case 8:
// layer = this.GetLayer(cod.Value);
// cod = this.ReadCodePair();
// break;
//case 62:
// color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
//case 6:
// lineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
case 30:
elevation = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 39:
thickness = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 70:
flags = (PolylineTypeFlags)(int.Parse(cod.Val));
cod = this.ReadCodePair();
break;
case 71:
//this field might not exist for polyface meshes, we cannot depend on it
//numVertexes = int.Parse(code.Value); code = this.ReadCodePair();
cod = this.ReadCodePair();
break;
case 72:
//this field might not exist for polyface meshes, we cannot depend on it
//numFaces = int.Parse(code.Value);
cod = this.ReadCodePair();
break;
case 210:
normal.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 220:
normal.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 230:
normal.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
//case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
default:
if (cod.Cod >= 1000 && cod.Cod <= 1071)
throw new DxfInvalidCodeValueEntityException(cod.Cod, cod.Val, this.archivo,
"The extended data of an entity must start with the application registry code " + this.fileLine);
cod = this.ReadCodePair();
break;
}
}
//begin to read the vertex list
if (cod.Val != DxfCodigoObjeto.Vertex)
throw new DxfEntityException(DxfCodigoObjeto.Polilinea, this.archivo, "Vertex not found in line " + this.fileLine);
while (cod.Val != StringCode.EndSequence)
{
if (cod.Val == DxfCodigoObjeto.Vertex)
{
Debug.Assert(cod.Cod == 0);
Vertex vertex = this.ReadVertex(ref cod);
vertexes.Add(vertex);
}
}
// read the end end sequence object until a new element is found
if (cod.Val != StringCode.EndSequence)
throw new DxfEntityException(DxfCodigoObjeto.Polilinea, this.archivo, "End sequence entity not found in line " + this.fileLine);
cod = this.ReadCodePair();
string endSequenceHandle = string.Empty;
//Layer endSequenceLayer = layer;
while (cod.Cod != 0)
{
switch (cod.Cod)
{
case 5:
endSequenceHandle = cod.Val;
cod = this.ReadCodePair();
break;
//case 8:
// endSequenceLayer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
default:
cod = this.ReadCodePair();
break;
}
}
IPolilinea pol;
bool isClosed = false;
if ((flags & PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM) == PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM)
{
isClosed = true;
}
//to avoid possible error between the vertex type and the polyline type
//the polyline type will decide which information to use from the read vertex
if ((flags & PolylineTypeFlags.Polyline3D) == PolylineTypeFlags.Polyline3D)
{
List<Polyline3dVertex> polyline3dVertexes = new List<Polyline3dVertex>();
foreach (Vertex v in vertexes)
{
Polyline3dVertex vertex = new Polyline3dVertex
{
//Color = v.Color,
//Layer = v.Layer,
//LineType = v.LineType,
Location = v.Location,
Handle = v.Handle
};
//vertex.XData = v.XData;
polyline3dVertexes.Add(vertex);
}
////posible error avoidance, the polyline is marked as polyline3d code:(70,8) but the vertex is marked as PolylineVertex code:(70,0)
//if (v.Type == EntityType.PolylineVertex)
//{
// Polyline3dVertex polyline3dVertex = new Polyline3dVertex(((PolylineVertex)v).Location.X, ((PolylineVertex)v).Location.Y,0);
// polyline3dVertexes.Add(polyline3dVertex);
//}
//else
//{
// polyline3dVertexes.Add((Polyline3dVertex)v);
//}
//}
pol = new Polyline3d(polyline3dVertexes, isClosed)
{
Handle = handle
};
//((Polyline3d)pol).EndSequence.Handle = endSequenceHandle;
//((Polyline3d)pol).EndSequence.Layer = endSequenceLayer;
}
else if ((flags & PolylineTypeFlags.PolyfaceMesh) == PolylineTypeFlags.PolyfaceMesh)
{
//the vertex list created contains vertex and face information
List<PolyfaceMeshVertex> polyfaceVertexes = new List<PolyfaceMeshVertex>();
List<PolyfaceMeshFace> polyfaceFaces = new List<PolyfaceMeshFace>();
foreach (Vertex v in vertexes)
{
if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh)) == (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh))
{
PolyfaceMeshVertex vertex = new PolyfaceMeshVertex
{
//Color = v.Color,
//Layer = v.Layer,
//LineType = v.LineType,
Location = v.Location,
Handle = v.Handle
};
//vertex.XData = xData;
polyfaceVertexes.Add(vertex);
}
else if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex)) == (VertexTypeFlags.PolyfaceMeshVertex))
{
PolyfaceMeshFace vertex = new PolyfaceMeshFace
{
//Color = v.Color,
//Layer = v.Layer,
//LineType = v.LineType,
VertexIndexes = v.VertexIndexes,
Handle = v.Handle
};
//vertex.XData = xData;
polyfaceFaces.Add(vertex);
}
//if (v.Type == EntityType.PolyfaceMeshVertex)
//{
// polyfaceVertexes.Add((PolyfaceMeshVertex) v);
//}
//else if (v.Type == EntityType.PolyfaceMeshFace)
//{
// polyfaceFaces.Add((PolyfaceMeshFace) v);
//}
//else
//{
// throw new EntityDxfException(v.Type.ToString(), this.file, "Error in vertex type.");
//}
}
pol = new PolyfaceMesh(polyfaceVertexes, polyfaceFaces)
{
Handle = handle
};
//((PolyfaceMesh)pol).EndSequence.Handle = endSequenceHandle;
//((PolyfaceMesh)pol).EndSequence.Layer = endSequenceLayer;
}
else
{
List<PolylineVertex> polylineVertexes = new List<PolylineVertex>();
foreach (Vertex v in vertexes)
{
PolylineVertex vertex = new PolylineVertex
{
Location = new Vector2f(v.Location.X, v.Location.Y),
BeginThickness = v.BeginThickness,
Bulge = v.Bulge,
//Color = v.Color,
EndThickness = v.EndThickness,
//Layer = v.Layer,
//LineType = v.LineType,
Handle = v.Handle
};
//vertex.XData = xData;
////posible error avoidance, the polyline is marked as polyline code:(70,0) but the vertex is marked as Polyline3dVertex code:(70,32)
//if (v.Type==EntityType.Polyline3dVertex)
//{
// PolylineVertex polylineVertex = new PolylineVertex(((Polyline3dVertex)v).Location.X, ((Polyline3dVertex)v).Location.Y);
// polylineVertexes.Add(polylineVertex);
//}
//else
//{
// polylineVertexes.Add((PolylineVertex) v);
//}
polylineVertexes.Add(vertex);
}
pol = new Polilinea(polylineVertexes, isClosed)
{
//Thickness = thickness,
Elevation = elevation,
Normal = normal,
Handle = handle
};
//((Polilinea)pol).EndSequence.Handle = endSequenceHandle;
//((Polilinea)pol).EndSequence.Layer = endSequenceLayer;
}
//pol.Color = color;
//pol.Layer = layer;
//pol.LineType = lineType;
//pol.XData = xData;
return pol;
}
//private Face3d ReadFace3D(ref CodeValuePair code)
//{
// var face = new Face3d();
// Vector3f v0 = Vector3f.Zero;
// Vector3f v1 = Vector3f.Zero;
// Vector3f v2 = Vector3f.Zero;
// Vector3f v3 = Vector3f.Zero;
// Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
// code = this.ReadCodePair();
// while (code.Code != 0)
// {
// switch (code.Code)
// {
// case 5:
// face.Handle = code.Value;
// code = this.ReadCodePair();
// break;
// case 8: //layer code
// face.Layer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
// case 62: //aci color code
// face.Color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
// case 6: //type line code
// face.LineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
// case 10:
// v0.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 20:
// v0.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 30:
// v0.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 11:
// v1.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 21:
// v1.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 31:
// v1.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 12:
// v2.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 22:
// v2.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 32:
// v2.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 13:
// v3.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 23:
// v3.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 33:
// v3.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 70:
// face.EdgeFlags = (EdgeFlags)(int.Parse(code.Value));
// code = this.ReadCodePair();
// break;
// case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
// default:
// if (code.Code >= 1000 && code.Code <= 1071)
// throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
// "The extended data of an entity must start with the application registry code " + this.fileLine);
// code = this.ReadCodePair();
// break;
// }
// }
// face.FirstVertex = v0;
// face.SecondVertex = v1;
// face.ThirdVertex = v2;
// face.FourthVertex = v3;
// face.XData = xData;
// return face;
//}
//private Solid ReadSolid(ref CodeValuePair code)
//{
// var solid = new Solid();
// Vector3f v0 = Vector3f.Zero;
// Vector3f v1 = Vector3f.Zero;
// Vector3f v2 = Vector3f.Zero;
// Vector3f v3 = Vector3f.Zero;
// Vector3f normal = Vector3f.UnitZ;
// Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
// code = this.ReadCodePair();
// while (code.Code != 0)
// {
// switch (code.Code)
// {
// case 5:
// solid.Handle = code.Value;
// code = this.ReadCodePair();
// break;
// case 8: //layer code
// solid.Layer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
// case 62: //aci color code
// solid.Color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
// case 6: //type line code
// solid.LineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
// case 10:
// v0.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 20:
// v0.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 30:
// v0.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 11:
// v1.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 21:
// v1.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 31:
// v1.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 12:
// v2.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 22:
// v2.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 32:
// v2.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 13:
// v3.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 23:
// v3.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 33:
// v3.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 70:
// solid.Thickness = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 210:
// normal.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 220:
// normal.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 230:
// normal.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
// default:
// if (code.Code >= 1000 && code.Code <= 1071)
// throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
// "The extended data of an entity must start with the application registry code " + this.fileLine);
// code = this.ReadCodePair();
// break;
// }
// }
// solid.FirstVertex = v0;
// solid.SecondVertex = v1;
// solid.ThirdVertex = v2;
// solid.FourthVertex = v3;
// solid.Normal = normal;
// solid.XData = xData;
// return solid;
//}
//private Insert ReadInsert(ref CodeValuePair code)
//{
// string handle = string.Empty;
// Vector3f basePoint = Vector3f.Zero;
// Vector3f normal = Vector3f.UnitZ;
// Vector3f scale = new Vector3f(1, 1, 1);
// float rotation = 0.0f;
// Block block = null;
// Layer layer = Layer.Default;
// AciColor color = AciColor.ByLayer;
// LineType lineType = LineType.ByLayer;
// List<Attribute> attributes = new List<Attribute>();
// Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
// code = this.ReadCodePair();
// while (code.Code != 0)
// {
// switch (code.Code)
// {
// case 5:
// handle = code.Value;
// code = this.ReadCodePair();
// break;
// case 2:
// block = this.GetBlock(code.Value);
// if (block == null)
// throw new DxfEntityException(DxfObjectCode.Insert, this.file, "Block " + code.Value + " not defined line " + this.fileLine);
// code = this.ReadCodePair();
// break;
// case 8: //layer code
// layer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
// case 62: //aci color code
// color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
// case 6: //type line code
// lineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
// case 10:
// basePoint.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 20:
// basePoint.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 30:
// basePoint.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 41:
// scale.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 42:
// scale.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 43:
// scale.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 50:
// rotation = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 210:
// normal.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 220:
// normal.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 230:
// normal.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
// default:
// if (code.Code >= 1000 && code.Code <= 1071)
// throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
// "The extended data of an entity must start with the application registry code " + this.fileLine);
// code = this.ReadCodePair();
// break;
// }
// }
// // if there are attributes
// string endSequenceHandle = string.Empty;
// Layer endSequenceLayer = Layer.Default;
// if (code.Value == DxfObjectCode.Attribute)
// {
// while (code.Value != StringCode.EndSequence)
// {
// if (code.Value == DxfObjectCode.Attribute)
// {
// Debug.Assert(code.Code == 0);
// Attribute attribute = this.ReadAttribute(block, ref code);
// attributes.Add(attribute);
// }
// }
// // read the end end sequence object until a new element is found
// code = this.ReadCodePair();
// while (code.Code != 0)
// {
// switch (code.Code)
// {
// case 5:
// endSequenceHandle = code.Value;
// code = this.ReadCodePair();
// break;
// case 8:
// endSequenceLayer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
// default:
// code = this.ReadCodePair();
// break;
// }
// }
// }
// Insert insert = new Insert(block)
// {
// Color = color,
// Layer = layer,
// LineType = lineType,
// InsertionPoint = basePoint,
// Rotation = rotation,
// Scale = scale,
// Normal = normal,
// Handle = handle
// };
// insert.EndSequence.Handle = endSequenceHandle;
// insert.EndSequence.Layer = endSequenceLayer;
// insert.Attributes.Clear();
// insert.Attributes.AddRange(attributes);
// insert.XData = xData;
// return insert;
//}
private Linea ReadLinea(ref ParCodigoValor cod)
{
var linea = new Linea();
Vector3f inicio = Vector3f.Nulo;
Vector3f fin = Vector3f.Nulo;
Vector3f normal = Vector3f.UnitarioZ ;
//Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
cod = this.ReadCodePair();
while (cod.Cod != 0)
{
switch (cod.Cod)
{
case 5:
linea.Handle = cod.Val;
cod = this.ReadCodePair();
break;
//case 8: //layer code
// linea.Layer = this.GetLayer(cod.Val);
// cod = this.ReadCodePair();
// break;
//case 62: //aci color code
// linea.Color = new AciColor(short.Parse(cod.Val));
// cod = this.ReadCodePair();
// break;
//case 6: //type line code
// linea.LineType = this.GetLineType(cod.Val);
// cod = this.ReadCodePair();
// break;
case 10:
inicio.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 20:
inicio.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 30:
inicio.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 11:
fin.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 21:
fin.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 31:
fin.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
//case 39:
// linea.Thickness = float.Parse(cod.Val);
// cod = this.ReadCodePair();
// break;
case 210:
normal.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 220:
normal.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 230:
normal.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
//case 1001:
// XData xDataItem = this.ReadXDataRecord(cod.Val, ref cod);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
default:
if (cod.Cod >= 1000 && cod.Cod <= 1071)
throw new DxfInvalidCodeValueEntityException(cod.Cod, cod.Val, this.archivo,
"The extended data of an entity must start with the application registry code " + this.fileLine);
cod = this.ReadCodePair();
break;
}
}
linea.PuntoInicio = inicio;
linea.PuntoFinal = fin;
linea.Normal = normal;
//linea.XData = xData;
return linea;
}
private Arco ReadArco(ref ParCodigoValor cod)
{
var arco = new Arco();
Vector3f centro = Vector3f.Nulo;
Vector3f normal = Vector3f.UnitarioZ;
//Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
cod = this.ReadCodePair();
while (cod.Cod != 0)
{
switch (cod.Cod)
{
case 5:
arco.Handle = cod.Val;
cod = this.ReadCodePair();
break;
//case 8: //layer code
// arco.Layer = this.GetLayer(cod.Val);
// cod = this.ReadCodePair();
// break;
//case 62: //aci color code
// arco.Color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
//case 6: //type line code
// arc.LineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
case 10:
centro.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 20:
centro.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 30:
centro.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 40:
arco.Radio = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 50:
arco.AnguloInicio = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 51:
arco.AnguloFin = float.Parse(cod.Val);
cod= this.ReadCodePair();
break;
//case 39:
// arc.Thickness = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
case 210:
normal.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 220:
normal.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 230:
normal.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
//case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
default:
if (cod.Cod >= 1000 && cod.Cod <= 1071)
throw new DxfInvalidCodeValueEntityException(cod.Cod, cod.Val,
this.archivo, "The extended data of an entity must start with the application registry code " + this.fileLine);
cod = this.ReadCodePair();
break;
}
}
//arc.XData = xData;
arco.Centro = centro;
arco.Normal = normal;
Vector3f PuntoInicio = Vector3f.Nulo;
Vector3f PuntoFin = Vector3f.Nulo;
PuntoInicio.X = arco.Centro.X + arco.Radio * (float)Math.Cos(MathHelper.DegToRad * arco.AnguloInicio);
PuntoInicio.Y = arco.Centro.Y + arco.Radio * (float)Math.Sin(MathHelper.DegToRad * arco.AnguloInicio);
//por ahora queda en duro
PuntoInicio.Z = arco.Centro.Z;
PuntoFin.X = arco.Centro.X + arco.Radio * (float)Math.Cos(MathHelper.DegToRad * arco.AnguloFin);
PuntoFin.Y = arco.Centro.Y + arco.Radio * (float)Math.Sin(MathHelper.DegToRad * arco.AnguloFin);
//por ahora queda en duro
PuntoFin.Z = arco.Centro.Z;
arco.PuntoInicio = PuntoInicio;
arco.PuntoFin = PuntoFin;
//por defecto lo ponemos en antihorario
arco.Sentido = 'A';
return arco;
}
//private LightWeightPolyline ReadLightWeightPolyline(ref CodeValuePair code)
//{
// var pol = new LightWeightPolyline();
// //int numVertexes;
// float constantWidth = 0.0F;
// LightWeightPolylineVertex v = new LightWeightPolylineVertex();
// float vX = 0.0f;
// Vector3f normal = Vector3f.UnitZ;
// Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
// code = this.ReadCodePair();
// while (code.Code != 0)
// {
// switch (code.Code)
// {
// case 5:
// pol.Handle = code.Value;
// code = this.ReadCodePair();
// break;
// case 8:
// pol.Layer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
// case 62:
// pol.Color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
// case 6:
// pol.LineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
// case 38:
// pol.Elevation = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 39:
// pol.Thickness = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 43:
// constantWidth = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 70:
// if (int.Parse(code.Value) == 0)
// {
// pol.IsClosed = false;
// }
// else if (int.Parse(code.Value) == 1)
// {
// pol.IsClosed = true;
// }
// code = this.ReadCodePair();
// break;
// case 90:
// //numVertexes = int.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 10:
// v = new LightWeightPolylineVertex
// {
// BeginThickness = constantWidth,
// EndThickness = constantWidth
// };
// vX = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 20:
// float vY = float.Parse(code.Value);
// v.Location = new Vector2f(vX, vY);
// pol.Vertexes.Add(v);
// code = this.ReadCodePair();
// break;
// case 40:
// v.BeginThickness = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 41:
// v.EndThickness = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 42:
// v.Bulge = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 210:
// normal.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 220:
// normal.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 230:
// normal.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
// default:
// if (code.Code >= 1000 && code.Code <= 1071)
// throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
// "The extended data of an entity must start with the application registry code " + this.fileLine);
// code = this.ReadCodePair();
// break;
// }
// }
// pol.Normal = normal;
// pol.XData = xData;
// return pol;
//}
//private IPolyline ReadPolyline(ref CodeValuePair code)
//{
// string handle = string.Empty;
// Layer layer = Layer.Default;
// AciColor color = AciColor.ByLayer;
// LineType lineType = LineType.ByLayer;
// PolylineTypeFlags flags = PolylineTypeFlags.OpenPolyline;
// float elevation = 0.0f;
// float thickness = 0.0f;
// Vector3f normal = Vector3f.UnitZ;
// List<Vertex> vertexes = new List<Vertex>();
// Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
// //int numVertexes = -1;
// //int numFaces = -1;
// code = this.ReadCodePair();
// while (code.Code != 0)
// {
// switch (code.Code)
// {
// case 5:
// handle = code.Value;
// code = this.ReadCodePair();
// break;
// case 8:
// layer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
// case 62:
// color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
// case 6:
// lineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
// case 30:
// elevation = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 39:
// thickness = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 70:
// flags = (PolylineTypeFlags)(int.Parse(code.Value));
// code = this.ReadCodePair();
// break;
// case 71:
// //this field might not exist for polyface meshes, we cannot depend on it
// //numVertexes = int.Parse(code.Value); code = this.ReadCodePair();
// code = this.ReadCodePair();
// break;
// case 72:
// //this field might not exist for polyface meshes, we cannot depend on it
// //numFaces = int.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 210:
// normal.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 220:
// normal.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 230:
// normal.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
// default:
// if (code.Code >= 1000 && code.Code <= 1071)
// throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
// "The extended data of an entity must start with the application registry code " + this.fileLine);
// code = this.ReadCodePair();
// break;
// }
// }
// //begin to read the vertex list
// if (code.Value != DxfObjectCode.Vertex)
// throw new DxfEntityException(DxfObjectCode.Polyline, this.file, "Vertex not found in line " + this.fileLine);
// while (code.Value != StringCode.EndSequence)
// {
// if (code.Value == DxfObjectCode.Vertex)
// {
// Debug.Assert(code.Code == 0);
// Vertex vertex = this.ReadVertex(ref code);
// vertexes.Add(vertex);
// }
// }
// // read the end end sequence object until a new element is found
// if (code.Value != StringCode.EndSequence)
// throw new DxfEntityException(DxfObjectCode.Polyline, this.file, "End sequence entity not found in line " + this.fileLine);
// code = this.ReadCodePair();
// string endSequenceHandle = string.Empty;
// Layer endSequenceLayer = layer;
// while (code.Code != 0)
// {
// switch (code.Code)
// {
// case 5:
// endSequenceHandle = code.Value;
// code = this.ReadCodePair();
// break;
// case 8:
// endSequenceLayer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
// default:
// code = this.ReadCodePair();
// break;
// }
// }
// IPolyline pol;
// bool isClosed = false;
// if ((flags & PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM) == PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM)
// {
// isClosed = true;
// }
// //to avoid possible error between the vertex type and the polyline type
// //the polyline type will decide which information to use from the read vertex
// if ((flags & PolylineTypeFlags.Polyline3D) == PolylineTypeFlags.Polyline3D)
// {
// List<Polyline3dVertex> polyline3dVertexes = new List<Polyline3dVertex>();
// foreach (Vertex v in vertexes)
// {
// Polyline3dVertex vertex = new Polyline3dVertex
// {
// Color = v.Color,
// Layer = v.Layer,
// LineType = v.LineType,
// Location = v.Location,
// Handle = v.Handle
// };
// vertex.XData = v.XData;
// polyline3dVertexes.Add(vertex);
// }
// pol = new Polyline3d(polyline3dVertexes, isClosed)
// {
// Handle = handle
// };
// ((Polyline3d)pol).EndSequence.Handle = endSequenceHandle;
// ((Polyline3d)pol).EndSequence.Layer = endSequenceLayer;
// }
// else if ((flags & PolylineTypeFlags.PolyfaceMesh) == PolylineTypeFlags.PolyfaceMesh)
// {
// //the vertex list created contains vertex and face information
// List<PolyfaceMeshVertex> polyfaceVertexes = new List<PolyfaceMeshVertex>();
// List<PolyfaceMeshFace> polyfaceFaces = new List<PolyfaceMeshFace>();
// foreach (Vertex v in vertexes)
// {
// if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh)) == (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh))
// {
// PolyfaceMeshVertex vertex = new PolyfaceMeshVertex
// {
// Color = v.Color,
// Layer = v.Layer,
// LineType = v.LineType,
// Location = v.Location,
// Handle = v.Handle
// };
// vertex.XData = xData;
// polyfaceVertexes.Add(vertex);
// }
// else if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex)) == (VertexTypeFlags.PolyfaceMeshVertex))
// {
// PolyfaceMeshFace vertex = new PolyfaceMeshFace
// {
// Color = v.Color,
// Layer = v.Layer,
// LineType = v.LineType,
// VertexIndexes = v.VertexIndexes,
// Handle = v.Handle
// };
// vertex.XData = xData;
// polyfaceFaces.Add(vertex);
// }
// }
// pol = new PolyfaceMesh(polyfaceVertexes, polyfaceFaces)
// {
// Handle = handle
// };
// ((PolyfaceMesh)pol).EndSequence.Handle = endSequenceHandle;
// ((PolyfaceMesh)pol).EndSequence.Layer = endSequenceLayer;
// }
// else
// {
// List<PolylineVertex> polylineVertexes = new List<PolylineVertex>();
// foreach (Vertex v in vertexes)
// {
// PolylineVertex vertex = new PolylineVertex
// {
// Location = new Vector2f(v.Location.X, v.Location.Y),
// BeginThickness = v.BeginThickness,
// Bulge = v.Bulge,
// Color = v.Color,
// EndThickness = v.EndThickness,
// Layer = v.Layer,
// LineType = v.LineType,
// Handle = v.Handle
// };
// vertex.XData = xData;
// polylineVertexes.Add(vertex);
// }
// pol = new Polyline(polylineVertexes, isClosed)
// {
// Thickness = thickness,
// Elevation = elevation,
// Normal = normal,
// Handle = handle
// };
// ((Polyline)pol).EndSequence.Handle = endSequenceHandle;
// ((Polyline)pol).EndSequence.Layer = endSequenceLayer;
// }
// pol.Color = color;
// pol.Layer = layer;
// pol.LineType = lineType;
// pol.XData = xData;
// return pol;
//}
//private Text ReadText(ref ParCodigoValor code)
//{
// var text = new Text();
// Vector3f firstAlignmentPoint = Vector3f.Zero;
// Vector3f secondAlignmentPoint = Vector3f.Zero;
// Vector3f normal = Vector3f.UnitZ;
// int horizontalAlignment = 0;
// int verticalAlignment = 0;
// Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
// code = this.ReadCodePair();
// while (code.Code != 0)
// {
// switch (code.Code)
// {
// case 5:
// text.Handle = code.Value;
// code = this.ReadCodePair();
// break;
// case 1:
// text.Value = code.Value;
// code = this.ReadCodePair();
// break;
// case 8: //layer code
// text.Layer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
// case 62: //aci color code
// text.Color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
// case 6: //type line code
// text.LineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
// case 10:
// firstAlignmentPoint.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 20:
// firstAlignmentPoint.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 30:
// firstAlignmentPoint.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 11:
// secondAlignmentPoint.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 21:
// secondAlignmentPoint.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 31:
// secondAlignmentPoint.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 40:
// text.Height = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 41:
// text.WidthFactor = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 50:
// text.Rotation = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 51:
// text.ObliqueAngle = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 7:
// text.Style = this.GetTextStyle(code.Value);
// code = this.ReadCodePair();
// break;
// case 72:
// horizontalAlignment = int.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 73:
// verticalAlignment = int.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 210:
// normal.X = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 220:
// normal.Y = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 230:
// normal.Z = float.Parse(code.Value);
// code = this.ReadCodePair();
// break;
// case 1001:
// XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
// default:
// if (code.Code >= 1000 && code.Code <= 1071)
// throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
// "The extended data of an entity must start with the application registry code " + this.fileLine);
// code = this.ReadCodePair();
// break;
// }
// }
// TextAlignment alignment = ObtainAlignment(horizontalAlignment, verticalAlignment);
// text.BasePoint = alignment == TextAlignment.BaselineLeft ? firstAlignmentPoint : secondAlignmentPoint;
// text.Normal = normal;
// text.Alignment = alignment;
// text.XData = xData;
// return text;
//}
//private Vertex ReadVertex(ref ParCodigoValor cod)
//{
// string handle = string.Empty;
// Layer layer = Layer.Default;
// AciColor color = AciColor.ByLayer;
// LineType lineType = LineType.ByLayer;
// Vector3f location = new Vector3f();
// Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
// float endThickness = 0.0f;
// float beginThickness = 0.0f;
// float bulge = 0.0f;
// List<int> vertexIndexes = new List<int>();
// VertexTypeFlags flags = VertexTypeFlags.PolylineVertex;
// cod = this.ReadCodePair();
// while (cod.Cod != 0)
// {
// switch (cod.Cod)
// {
// case 5:
// handle = cod.Val;
// cod = this.ReadCodePair();
// break;
// case 8:
// layer = this.GetLayer(cod.Val);
// cod = this.ReadCodePair();
// break;
// case 62:
// color = new AciColor(short.Parse(cod.Val));
// cod = this.ReadCodePair();
// break;
// case 6:
// lineType = this.GetLineType(code.Val);
// cod = this.ReadCodePair();
// break;
// case 10:
// location.X = float.Parse(cod.Val);
// cod = this.ReadCodePair();
// break;
// case 20:
// location.Y = float.Parse(cod.Val);
// cod = this.ReadCodePair();
// break;
// case 30:
// location.Z = float.Parse(cod.Val);
// cod = this.ReadCodePair();
// break;
// case 40:
// beginThickness = float.Parse(cod.Val);
// cod = this.ReadCodePair();
// break;
// case 41:
// endThickness = float.Parse(cod.Val);
// cod = this.ReadCodePair();
// break;
// case 42:
// bulge = float.Parse(cod.Val);
// cod = this.ReadCodePair();
// break;
// case 70:
// flags = (VertexTypeFlags)int.Parse(cod.Val);
// cod = this.ReadCodePair();
// break;
// case 71:
// vertexIndexes.Add(int.Parse(cod.Val));
// cod = this.ReadCodePair();
// break;
// case 72:
// vertexIndexes.Add(int.Parse(cod.Val));
// cod = this.ReadCodePair();
// break;
// case 73:
// vertexIndexes.Add(int.Parse(cod.Val));
// cod = this.ReadCodePair();
// break;
// case 74:
// vertexIndexes.Add(int.Parse(cod.Val));
// cod = this.ReadCodePair();
// break;
// case 1001:
// XData xDataItem = this.ReadXDataRecord(cod.Val, ref cod);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
// default:
// if (cod.Cod >= 1000 && cod.Cod <= 1071)
// throw new DxfInvalidCodeValueEntityException(cod.Cod, cod.Val, this.archivo,
// "The extended data of an entity must start with the application registry code " + this.fileLine);
// cod = this.ReadCodePair();
// break;
// }
// }
// return new Vertex
// {
// Flags = flags,
// Location = location,
// BeginThickness = beginThickness,
// Bulge = bulge,
// Color = color,
// EndThickness = endThickness,
// Layer = layer,
// LineType = lineType,
// VertexIndexes = vertexIndexes.ToArray(),
// XData = xData,
// Handle = handle
// };
//}
private LightWeightPolyline ReadLightWeightPolyline(ref ParCodigoValor cod)
{
var pol = new LightWeightPolyline();
//int numVertexes;
float constantWidth = 0.0F;
LightWeightPolylineVertex v = new LightWeightPolylineVertex();
float vX = 0.0f;
Vector3f normal = Vector3f.UnitarioZ;
//Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
cod = this.ReadCodePair();
while (cod.Cod != 0)
{
switch (cod.Cod)
{
case 5:
pol.Handle = cod.Val;
cod = this.ReadCodePair();
break;
//case 8:
// pol.Layer = this.GetLayer(code.Value);
// code = this.ReadCodePair();
// break;
//case 62:
// pol.Color = new AciColor(short.Parse(code.Value));
// code = this.ReadCodePair();
// break;
//case 6:
// pol.LineType = this.GetLineType(code.Value);
// code = this.ReadCodePair();
// break;
case 38:
pol.Elevation = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 39:
pol.Thickness = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 43:
constantWidth = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 70:
if (int.Parse(cod.Val) == 0)
{
pol.IsClosed = false;
}
else if (int.Parse(cod.Val) == 1)
{
pol.IsClosed = true;
}
cod = this.ReadCodePair();
break;
case 90:
//numVertexes = int.Parse(code.Value);
cod = this.ReadCodePair();
break;
case 10:
v = new LightWeightPolylineVertex
{
BeginThickness = constantWidth,
EndThickness = constantWidth
};
vX = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 20:
float vY = float.Parse(cod.Val);
v.Location = new Vector2f(vX, vY);
pol.Vertexes.Add(v);
cod = this.ReadCodePair();
break;
case 40:
v.BeginThickness = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 41:
v.EndThickness = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 42:
v.Bulge = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 210:
normal.X = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 220:
normal.Y = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
case 230:
normal.Z = float.Parse(cod.Val);
cod = this.ReadCodePair();
break;
//case 1001:
// XData xDataItem = this.ReadXDataRecord(cod.Val, ref cod);
// xData.Add(xDataItem.ApplicationRegistry, xDataItem);
// break;
default:
if (cod.Cod >= 1000 && cod.Cod <= 1071)
throw new DxfInvalidCodeValueEntityException(cod.Cod, cod.Val, this.archivo,
"The extended data of an entity must start with the application registry code " + this.fileLine);
cod = this.ReadCodePair();
break;
}
}
pol.Normal = normal;
//pol.XData = xData;
return pol;
}
