public void infoUpdated(PLTConnection pltConnection, PLTInfo pltInfo)
{
switch (pltInfo.m_serviceType)
{
case PLTService.MOTION_TRACKING_SVC:
PLTMotionTrackingData tracking = (PLTMotionTrackingData)pltInfo.m_data;
PlantronicsMessage msg = new PlantronicsMessage(
pltInfo.m_serviceType.ToString(),
"heading"
);
msg.Payload.Add("orientation",
(int)tracking.m_orientation[0] + "," +
(int)tracking.m_orientation[1] + "," +
(int)tracking.m_orientation[2]);
BroadcastMessage(msg
);
break;
case PLTService.SENSOR_CAL_STATE_SVC:
PLTSensorCal calinfo = (PLTSensorCal)pltInfo.m_data;
if (calinfo.m_isgyrocal != m_gyrocal)
{
PlantronicsMessage msg2 = new PlantronicsMessage(pltInfo.m_serviceType.ToString(),
"gyrocalibinfo"
);
msg2.Payload.Add("gyrocalibrated",
calinfo.m_isgyrocal.ToString());
BroadcastMessage(
msg2
);
}
m_gyrocal = calinfo.m_isgyrocal;
break;
}
}
public void infoUpdated(PLTConnection pltConnection, PLTInfo pltInfo)
{
// TODO work in progress
switch (pltInfo.m_serviceType)
{
case PLTService.MOTION_TRACKING_SVC:
PLTMotionTrackingData trackingdata = (PLTMotionTrackingData)pltInfo.m_data;
//DebugPrint(MethodInfo.GetCurrentMethod().Name, "Motion Tracking Update received:\r\n" +
// "raw q0: " + trackingdata.m_rawquaternion[0] + "\r\n" +
// "raw q1: " + trackingdata.m_rawquaternion[1] + "\r\n" +
// "raw q2: " + trackingdata.m_rawquaternion[2] + "\r\n" +
// "raw q3: " + trackingdata.m_rawquaternion[3]);
DebugPrint(MethodInfo.GetCurrentMethod().Name, "Motion Tracking Update received:\r\n" +
"heading: " + trackingdata.m_orientation[0] + "\r\n" +
"pitch: " + trackingdata.m_orientation[1] + "\r\n" +
"roll: " + trackingdata.m_orientation[2]);
break;
case PLTService.SENSOR_CAL_STATE_SVC:
PLTSensorCal sensorcaldata = (PLTSensorCal)pltInfo.m_data;
DebugPrint(MethodInfo.GetCurrentMethod().Name, "Sensor calibration update received:\r\n" +
"Gyros calibrated?: " + sensorcaldata.m_isgyrocal + "\r\n" +
"Magnetometer calibrated?: " + sensorcaldata.m_ismagnetometercal);
break;
}
}
public void infoUpdated(PLTConnection pltConnection, PLTInfo pltInfo)
{
if (pltInfo != null && pltInfo.m_data != null)
{
switch (pltInfo.m_serviceType)
{
case PLTService.SENSOR_CAL_STATE_SVC:
PLTSensorCal caldata = (PLTSensorCal)pltInfo.m_data;
m_calibrated = caldata.m_isgyrocal;
break;
case PLTService.MOTION_TRACKING_SVC:
PLTMotionTrackingData motiondata = (PLTMotionTrackingData)pltInfo.m_data;
HeadsetTrackingUpdate(motiondata);
break;
case PLTService.WEARING_STATE_SVC:
PLTWearingState weardata = (PLTWearingState)pltInfo.m_data;
m_worn = weardata.m_worn;
if (weardata.m_worn && !weardata.m_isInitialStateEvent)
{
// headset was put on
// lets auto calibrate
m_autoputoncalibratetimer.Start();
}
break;
}
}
}
public void infoUpdated(PLTConnection pltConnection, PLTInfo pltInfo)
{
// make sure we have some data...
if (pltInfo != null && pltInfo.m_data != null)
{
switch (pltInfo.m_serviceType)
{
case PLTService.MOTION_TRACKING_SVC:
PLTMotionTrackingData trackingdata = (PLTMotionTrackingData)pltInfo.m_data;
//DebugPrint(MethodInfo.GetCurrentMethod().Name, "Motion Tracking Update received:\r\n" +
//"raw q0: " + trackingdata.m_rawquaternion[0] + "\r\n" +
//"raw q1: " + trackingdata.m_rawquaternion[1] + "\r\n" +
//"raw q2: " + trackingdata.m_rawquaternion[2] + "\r\n" +
//"raw q3: " + trackingdata.m_rawquaternion[3]);
// great we got some angles - lets update the GUI!
HeadsetTrackingUpdateGUI(trackingdata);
break;
case PLTService.MOTION_STATE_SVC:
// NOTE: this service is not yet available, no data will come here
break;
case PLTService.SENSOR_CAL_STATE_SVC:
PLTSensorCal caldata = (PLTSensorCal)pltInfo.m_data;
UpdateCalibrationGUI(caldata);
break;
case PLTService.PEDOMETER_SVC:
PLTPedometerCount peddata = (PLTPedometerCount)pltInfo.m_data;
m_lastpedometercount = peddata.m_pedometercount;
if (m_lastpedometerreset == -1)
{
m_lastpedometerreset = m_lastpedometercount;
}
UpdatePedometerGUI();
break;
case PLTService.TAP_SVC:
UpdateTapInfoGUI((PLTTapInfo)pltInfo.m_data);
break;
case PLTService.WEARING_STATE_SVC:
PLTWearingState wearingstate = (PLTWearingState)pltInfo.m_data;
DebugPrint(MethodInfo.GetCurrentMethod().Name, "Wearing State Update received:\r\n" +
"Is Worn?: " + wearingstate.m_worn + "\r\n" +
"Initial State?: " + wearingstate.m_isInitialStateEvent);
if (wearingstate.m_worn && !wearingstate.m_isInitialStateEvent)
{
// they have put headset on, start the auto calibrate timer
// to zero angles in 2 seconds time
m_autoputoncalibratetimer.Start();
}
break;
case PLTService.FREE_FALL_SVC:
UpdateFreeFallGUI((PLTFreeFall)pltInfo.m_data);
break;
case PLTService.PROXIMITY_SVC:
PLTProximity proximitystate = (PLTProximity)pltInfo.m_data;
DebugPrint(MethodInfo.GetCurrentMethod().Name, "Proximity State Update received:\r\n" +
"Proximity State: " + proximitystate.m_proximity);
break;
case PLTService.CALLERID_SVC:
PLTCallerId callerid = (PLTCallerId)pltInfo.m_data;
DebugPrint(MethodInfo.GetCurrentMethod().Name, "Caller Id Update received:\r\n" +
"Caller Id: " + callerid.m_callerid + "\r\n" +
"Line type: " + callerid.m_calltype);
break;
case PLTService.CALLSTATE_SVC:
PLTCallStateInfo callinfo = (PLTCallStateInfo)pltInfo.m_data;
DebugPrint(MethodInfo.GetCurrentMethod().Name, "Call State Update received:\r\n" +
"Call State Event Type: " + callinfo.m_callstatetype + "\r\n" +
"Call Status: " + callinfo.m_callstate + "\r\n" +
"Internal Call Id: " + callinfo.m_callid + "\r\n" +
"Call Source: " + callinfo.m_callsource + "\r\n" +
"Was Incoming?: " + callinfo.m_incoming);
break;
case PLTService.DOCKSTATE_SVC:
PLTDock dockedstate = (PLTDock)pltInfo.m_data;
DebugPrint(MethodInfo.GetCurrentMethod().Name, "Docked State Update received:\r\n" +
"Docked State: " + dockedstate.m_isdocked + "\r\n" +
"Is Initial State?: " + dockedstate.m_isinitialstatus);
break;
case PLTService.CHARGESTATE_SVC:
UpdateBatteryLevelGUI((PLTBatteryState)pltInfo.m_data);
break;
}
}
else
{
// no data...
DebugPrint(MethodInfo.GetCurrentMethod().Name, "WARNING: no data for service subscription:\r\n" +
"SERVICE: " + (pltInfo != null ? pltInfo.m_serviceType.ToString() : "null"));
}
}
