void OnShown(object sender, EventArgs ee)
{
// Note: Events are fired in the order (Load, Activated, Shown),
// It is said that using a MessageBox() can perturb the order of these events,
// causing Shown to occur before Load.
// http://stackoverflow.com/questions/3070163/order-of-form-load-form-shown-and-form-activated-events
// It is also said that "depending on the order of events fired" is undesirable / bad style;
// so perhaps once I understand what the idiomatic alternative would be,
// this should be changed.
//
// To call any GL methods (such as setting the GL Viewport, or loading textures)
// the OpenGL system must be initialized, which occurs upon the 'Load' event
// firing for a Form which contains a GLControl.
// http://www.opentk.com/doc/chapter/2/glcontrol
// See also, regarding OpenTK.Graphics.GraphicsContext:
// http://www.opentk.com/book/export/html/140
//
// For this reason, the GL setup, and GL texture loading (via TileSheet constructor calls)
// code has been moved here, in a method we set up to be called upon the 'Shown' event
// (which is fired upon the first display of this Form).
ts = new TileSheet(16, 16, NEW_OBJID,
@"media/tiles/U4.B_enhanced-32x32.png");
f1234 = new TileSheet(4, 9, 32, 32, 1, 1, 1, 1, NEW_OBJID,
@"media/tiles/example_all_facings.4_frames.intra_1.png");
f1234_stack = new TileSheet(1, 9, 32, 32, 1, 1, 1, 1, NEW_OBJID,
@"media/tiles/example_all_facings.stacked/example_all_facings.intra_1.frame_1.png",
@"media/tiles/example_all_facings.stacked/example_all_facings.intra_1.frame_2.png",
@"media/tiles/example_all_facings.stacked/example_all_facings.intra_1.frame_3.png",
@"media/tiles/example_all_facings.stacked/example_all_facings.intra_1.frame_4.png");
wp_ts = new TileSheet(4, 1, NEW_OBJID,
@"media/tiles/whirlpool_bright.png");
wp_stack_ts = new TileSheet(1, 1, NEW_OBJID,
@"media/tiles/whirlpool.stacked/whirlpool_1.png",
@"media/tiles/whirlpool.stacked/whirlpool_2.png",
@"media/tiles/whirlpool.stacked/whirlpool_3.png",
@"media/tiles/whirlpool.stacked/whirlpool_4.png");
creatures_stack = new TileSheet(4, 7, NEW_OBJID,
@"media/tiles/creatures.stacked/creatures.frame_1.png",
@"media/tiles/creatures.stacked/creatures.frame_2.png",
@"media/tiles/creatures.stacked/creatures.frame_3.png",
@"media/tiles/creatures.stacked/creatures.frame_4.png");
//string[] empty_file_names_list = { };
//TileSheet null_filenames_ts = new TileSheet(4, 4, NEW_OBJID, null ); // Will throw an exception
//TileSheet empty_filenames_list_ts = new TileSheet(4, 4, NEW_OBJID, empty_file_names_list); // Will throw an exception
TileSprite anim_blue_wiz = new TileSprite(ts, NEW_OBJID, 32, 33);
TileSprite anim_red_wiz = new TileSprite(ts, NEW_OBJID, 224, 225, 226, 227);
// Counters for 3 frames (A,B,C) and for 4 frames (1,2,3,4)
// This illustrates why the master frame cycle need be the Least Common Multiple of (3,4)
// (or whatever other set of ITileSprite.num_frames values).
TileSprite count_ABC = new TileSprite(ts, NEW_OBJID, 96, 97, 98); //ts[0, 6], ts[1, 6], ts[2, 6]);
TileSprite count_1234 = new TileSprite(f1234_stack, NEW_OBJID, 0, 9 + 0, 18 + 0, 27 + 0); // Same as count_1234, but frames from 4 files
// TileSprite whirlpool = new TileSprite(wp_ts, NEW_OBJID, 0, 1, 2, 3);
TileSprite whirlpool = new TileSprite(wp_stack_ts, NEW_OBJID, 0, 1, 2, 3); // Save as from wp_ts, but using 4 image files in a stack
TileSprite bat = new TileSprite(creatures_stack, NEW_OBJID, (0 * 28) + 1, (1 * 28) + 1, (2 * 28) + 1, (3 * 28) + 1);
TileSprite skel_mage = new TileSprite(creatures_stack, NEW_OBJID, (0 * 28) + 21, (1 * 28) + 21, (2 * 28) + 21, (3 * 28) + 21);
LF = new TileSheet(8, 1, NEW_OBJID,
@"media/tiles/lava.wave_down.speed_4.frames_8.png"); // LF == LavaFlow
TileSprite lava_flow = new TileSprite(LF, NEW_OBJID, 0, 1, 2, 3, 4, 5, 6, 7);
// TODO: Support some manner of ITileSprite for "wave" sprites
// TileSheet TW = new TileSheet(1, 9, NEW_OBJID, @"media/tiles/example_wave_test.intra_1.png"); // Will need WaveTileSprite to support this...
TileSprite grass = new TileSprite(ts, NEW_OBJID, 4);
TileSprite trees = new TileSprite(ts, NEW_OBJID, 6);
TileSprite boulder = new TileSprite(ts, NEW_OBJID, 57);
int[] path_rect_5x4 = new int[]
{ // 5 = grass, 7 = trees, 58 = boulder
boulder.ID, grass.ID, grass.ID, trees.ID, grass.ID,
grass.ID, grass.ID, grass.ID, trees.ID, trees.ID,
trees.ID, trees.ID, trees.ID, trees.ID, 0, // 0 is a "hole in the map" for blitting / map composition purposes
grass.ID, grass.ID, trees.ID, grass.ID, grass.ID,
};
DenseGrid map_16x64 = new DenseGrid(16, 64, lava_flow.ID);
// Blit a non-square grid onto the map, demonstrating the various possible rotations and flips:
DenseGrid flip_none = new DenseGrid(5, 4, path_rect_5x4);
DenseGrid flip_we = flip_none.Flip_WE();
DenseGrid flip_ns = flip_none.Flip_NS();
DenseGrid flip_wens = flip_we.Flip_NS();
DenseGrid.BlitFromAOntoB(flip_none, map_16x64, 1, 1);
DenseGrid.BlitFromAOntoB(flip_we, map_16x64, 7, 1);
DenseGrid.BlitFromAOntoB(flip_ns, map_16x64, 1, 7);
DenseGrid.BlitFromAOntoB(flip_wens, map_16x64, 7, 7);
DenseGrid flip_none_rot090 = flip_none.Rotate090();
DenseGrid flip_we_rot090 = flip_we.Rotate090();
DenseGrid flip_ns_rot090 = flip_ns.Rotate090();
DenseGrid flip_wens_rot090 = flip_wens.Rotate090();
DenseGrid.BlitFromAOntoB(flip_none_rot090, map_16x64, 1, 52);
DenseGrid.BlitFromAOntoB(flip_we_rot090, map_16x64, 7, 52);
DenseGrid.BlitFromAOntoB(flip_ns_rot090, map_16x64, 1, 58);
DenseGrid.BlitFromAOntoB(flip_wens_rot090, map_16x64, 7, 58);
map = new SimpleMapV1(16, 64);
map.AddTerrainRegion(map_16x64, 0, 0);
tvpc.scroll_constraint = ScrollConstraint.CenterTile;
tvpc.set_center(map, 2, 2);
// Add some elements to the Beings layer of the Map:
// BUG: (in demo data)
// The below are bare integers which do not correspond
// to a constructed TileSprite; those display wrongly (confusion between object ID and OpenGL texture ID or somesuch?)
// The fix is merely to create TileSprite objects and use their .ID
// (This fossil is due to the TileSheet + TileSprite refactor;
// the sprites are no longer implicitly created and stored within the TileSheet)
/*
map.layers[MapLayers.Beings].set_contents_at_XY( 8, 7, 256+21); // Horse
map.layers[MapLayers.Beings].set_contents_at_XY( 4, 15, 256+21); // Horse
map.layers[MapLayers.Beings].set_contents_at_XY( 8, 20, 33); // Wizard
map.layers[MapLayers.Beings].set_contents_at_XY( 3, 25, 70); // Force field
map.layers[MapLayers.Beings].set_contents_at_XY(10, 30, 29); // Stair down
map.layers[MapLayers.Beings].set_contents_at_XY( 9, 35, 30); // Ruin
map.layers[MapLayers.Beings].set_contents_at_XY( 6, 40, 45); // Archer
map.layers[MapLayers.Beings].set_contents_at_XY(12, 45, 23); // Purple tiles
map.layers[MapLayers.Beings].set_contents_at_XY( 5, 50, 19); // Ship
*/
map.layers[MapLayers.Beings].set_contents_at_XY(2, 1, anim_blue_wiz.ID); // Blue Wizard, animated (2 frames)
map.layers[MapLayers.Beings].set_contents_at_XY(3, 3, anim_red_wiz.ID); // Red Wizard, animated (4 frames)
map.layers[MapLayers.Beings].set_contents_at_XY(4, 1, count_ABC.ID); // 3 frames (A,B,C)
map.layers[MapLayers.Beings].set_contents_at_XY(5, 1, count_1234.ID); // 4 frames (1,2,3,4)
map.layers[MapLayers.Beings].set_contents_at_XY(6, 6, bat.ID);
map.layers[MapLayers.Beings].set_contents_at_XY(4, 7, skel_mage.ID);
map.layers[MapLayers.Beings].set_contents_at_XY(0, 0, whirlpool.ID);
// Add some elements to the UI_elements layer of the TileViewPort:
// Over-sized cursor
// Drawback: outside of tile bounds
// is off-viewport for edge-of-viewport sides of cursor on edge-of-viewport tiles.
// Also, the "quanta" animation rate for the cursor blinking is too fast, as in "pokemon epilepsy warning" too-fast.
// (Blinking at "frame" rate seems OK...may want a modestly faster rate.)
//
// This cursor _does_ look a lot better, other than for edge-of-viewport tiles.
// One possible solution to that issue would be for the "rest" state of the viewport
// to have an n-pixel border along all edges, showing partial tiles.
// Will need to coordinate all this with smooth-scrolling, too...
ts_cursor_blink_40x40 = new TileSheet(1, 1, 40, 40, 0, 0, 0, 0, NEW_OBJID,
@"media/cursors/cursor_40x40_blink.stacked/cursor_40x40.frame_1.png",
@"media/cursors/cursor_40x40_blink.stacked/cursor_40x40.frame_2.png");
TileSprite large_cursor = new TileSprite(ts_cursor_blink_40x40, NEW_OBJID, 0, 1);
int LC = large_cursor.ID;
tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(tvpc.center_x, tvpc.center_y, LC); // Center
tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(0, 0, LC); // NW
tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(tvpc.max_x, 0, LC); // NE
tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(0, tvpc.max_y, LC); // SW
tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(tvpc.max_x, tvpc.max_y, LC); // SE
// // "Marquee" cursor
// // Drawback: cursor itself is entirely within tile bounds, thus clips edge pixels of the under-cursor tile...
// //
//reticle_single_file_ts = new TileSheet(4, 1, NEW_OBJID, @"media/tiles/bright_marquee.frame_1234.png");
reticle_four_files_ts = new TileSheet(4, 4, NEW_OBJID,
@"media/tiles/bright_marquee.frame_1.png",
@"media/tiles/bright_marquee.frame_2.png",
@"media/tiles/bright_marquee.frame_3.png",
@"media/tiles/bright_marquee.frame_4.png"); // Also used in Form1.OnPaint()
//TileSprite anim_reticle = new TileSprite(reticle_four_files_ts, 15, 31, 47, 63); // Bottom right tile in each image file
//int reticle = anim_reticle.ID;
//tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(tvpc.center_x, tvpc.center_y, reticle); // Center
//tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(0, 0, reticle); // NW
//tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(tvpc.max_x, 0, reticle); // NE
//tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(0, tvpc.max_y, reticle); // SW
//tvpc.layers[ViewPortLayers.UI_Elements].set_contents_at_XY(tvpc.max_x, tvpc.max_y, reticle); // SE
// A few method calls to demonstrate that Archetype and Obj are working:
Archetype aa = new Archetype("first_test_archetype", 0);
aa.add_field("int_2a", FieldType.INT);
aa.add_field("string_2a", FieldType.STRING);
aa.add_field("decimal_2a", FieldType.DECIMAL);
aa.add_field("ID_2a", FieldType.ID);
aa.add_field("int_list", FieldType.LIST_INT);
aa.add_field("string_list", FieldType.LIST_STRING);
aa.add_field("decimal_list", FieldType.LIST_DECIMAL);
aa.add_field("ID_list", FieldType.LIST_ID);
Obj obj1 = new Obj(aa, "first_test_obj", 0);
stdout.print("archetype.serialize()\n");
stdout.print("{0}", aa.serialize() );
stdout.print("\n");
stdout.print("obj.serialize()\n");
stdout.print("{0}", obj1.serialize() );
stdout.print("\n");
}
