public Body Revolve(Part workPart, Axis axisRotation, Sketch sketch, Line lineSketch, Point3d point3dSketch, double degStart, double degEnd)
{
//RevolveBulidier
NXOpen.Features.Feature nullFeature1 = null;
NXOpen.Features.RevolveBuilder revolveBuilder1 = workPart.Features.CreateRevolveBuilder(nullFeature1);
//Section
Section section1 = workPart.Sections.CreateSection(0.02, 0.02, 0.02);
revolveBuilder1.Section = section1;
revolveBuilder1.Axis = axisRotation;
revolveBuilder1.Tolerance = 0.02;
section1.DistanceTolerance = 0.02;
section1.ChainingTolerance = 0.02;
//Line assignment
NXOpen.Features.Feature[] features1 = new NXOpen.Features.Feature[1];
NXOpen.Features.SketchFeature sketchFeature1 = (NXOpen.Features.SketchFeature)sketch.Feature;
features1[0] = sketchFeature1;
CurveFeatureRule curveFeatureRule1;
curveFeatureRule1 = workPart.ScRuleFactory.CreateRuleCurveFeature(features1);
section1.AllowSelfIntersection(true);
SelectionIntentRule[] rules1 = new SelectionIntentRule[1];
rules1[0] = curveFeatureRule1;
NXObject nullNXObject = null;
//Selection
section1.AddToSection(rules1, lineSketch, nullNXObject, nullNXObject, point3dSketch, NXOpen.Section.Mode.Create, false);
revolveBuilder1.Axis = axisRotation;
//Sheet Body selection
revolveBuilder1.FeatureOptions.BodyType = NXOpen.GeometricUtilities.FeatureOptions.BodyStyle.Sheet;
revolveBuilder1.Section = section1;
//Ustawienia
revolveBuilder1.Limits.StartExtend.Value.RightHandSide = degStart.ToString();
revolveBuilder1.Limits.EndExtend.Value.RightHandSide = degEnd.ToString();
revolveBuilder1.ParentFeatureInternal = false;
NXObject feature_revolve1 = revolveBuilder1.CommitFeature();
NXOpen.Features.BodyFeature bodyFeature1 = (NXOpen.Features.BodyFeature)feature_revolve1;
Body[] body = bodyFeature1.GetBodies();
return(body[0]);
}
public static void Main(string[] args)
{
Console.WriteLine("Starting NX Golden Cantilever Journal");
//Declare Part Variables
//Convert Strings to doubles from the args
double heightA = System.Convert.ToDouble(args[0]);
double length = System.Convert.ToDouble(args[1]);
double thickness = System.Convert.ToDouble(args[2]);
//Declare part name for the part file and the IGES file
string part_name = args[3];
string part_name_prt = part_name + ".prt";
string part_name_igs = part_name + ".igs";
//Measurements need to be converted from m to mm
//length = 1000 * length;
//thickness = 1000 * thickness;
//heightA = 1000 * heightA;
double heightB = 1.618 * heightA;
//Convert necessary values back to strings because I already
//converted them to doubles and I'm too lazy to go back and change
//this since it works.
string length_string = System.Convert.ToString(length);
string thickness_string = System.Convert.ToString(thickness);
string heightA_string = System.Convert.ToString(heightA);
string heightB_string = System.Convert.ToString(heightB);
NXOpen.Session theSession = NXOpen.Session.GetSession();
// ----------------------------------------------
// Menu: File->New...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId1;
markId1 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.FileNew fileNew1;
fileNew1 = theSession.Parts.FileNew();
theSession.SetUndoMarkName(markId1, "New Dialog");
NXOpen.Session.UndoMarkId markId2;
markId2 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "New");
theSession.DeleteUndoMark(markId2, null);
NXOpen.Session.UndoMarkId markId3;
markId3 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "New");
fileNew1.TemplateFileName = "model-plain-1-mm-template.prt";
fileNew1.UseBlankTemplate = false;
fileNew1.ApplicationName = "ModelTemplate";
fileNew1.Units = NXOpen.Part.Units.Millimeters;
fileNew1.RelationType = "";
fileNew1.UsesMasterModel = "No";
fileNew1.TemplateType = NXOpen.FileNewTemplateType.Item;
fileNew1.TemplatePresentationName = "Model";
fileNew1.ItemType = "";
fileNew1.Specialization = "";
fileNew1.SetCanCreateAltrep(false);
fileNew1.NewFileName = part_name_prt;
fileNew1.MasterFileName = "";
fileNew1.MakeDisplayedPart = true;
NXOpen.NXObject nXObject1;
nXObject1 = fileNew1.Commit();
NXOpen.Part workPart = theSession.Parts.Work;
NXOpen.Part displayPart = theSession.Parts.Display;
theSession.DeleteUndoMark(markId3, null);
fileNew1.Destroy();
theSession.ApplicationSwitchImmediate("UG_APP_MODELING");
NXOpen.Session.UndoMarkId markId4;
markId4 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Enter Gateway");
NXOpen.Session.UndoMarkId markId5;
markId5 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Enter Modeling");
// ----------------------------------------------
// Menu: Insert->Sketch...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId6;
markId6 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.Sketch nullNXOpen_Sketch = null;
NXOpen.SketchInPlaceBuilder sketchInPlaceBuilder1;
sketchInPlaceBuilder1 = workPart.Sketches.CreateNewSketchInPlaceBuilder(nullNXOpen_Sketch);
NXOpen.Unit unit1 = (NXOpen.Unit)workPart.UnitCollection.FindObject("MilliMeter");
NXOpen.Expression expression1;
expression1 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Expression expression2;
expression2 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.SketchAlongPathBuilder sketchAlongPathBuilder1;
sketchAlongPathBuilder1 = workPart.Sketches.CreateSketchAlongPathBuilder(nullNXOpen_Sketch);
sketchAlongPathBuilder1.PlaneLocation.Expression.RightHandSide = "0";
theSession.SetUndoMarkName(markId6, "Create Sketch Dialog");
NXOpen.DatumPlane datumPlane1 = (NXOpen.DatumPlane)workPart.Datums.FindObject("DATUM_CSYS(0) YZ plane");
NXOpen.Point3d point1 = new NXOpen.Point3d(11.1863449593062, 6.4875984180345, 0.0);
sketchInPlaceBuilder1.PlaneOrFace.SetValue(datumPlane1, workPart.ModelingViews.WorkView, point1);
NXOpen.Features.DatumCsys datumCsys1 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("DATUM_CSYS(0)");
NXOpen.Point point2 = (NXOpen.Point)datumCsys1.FindObject("POINT 1");
sketchInPlaceBuilder1.SketchOrigin = point2;
sketchInPlaceBuilder1.PlaneOrFace.Value = null;
sketchInPlaceBuilder1.PlaneOrFace.Value = datumPlane1;
NXOpen.DatumAxis datumAxis1 = (NXOpen.DatumAxis)workPart.Datums.FindObject("DATUM_CSYS(0) X axis");
sketchInPlaceBuilder1.Axis.Value = datumAxis1;
NXOpen.Session.UndoMarkId markId7;
markId7 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Create Sketch");
theSession.DeleteUndoMark(markId7, null);
NXOpen.Session.UndoMarkId markId8;
markId8 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Create Sketch");
theSession.Preferences.Sketch.CreateInferredConstraints = true;
theSession.Preferences.Sketch.ContinuousAutoDimensioning = true;
theSession.Preferences.Sketch.DimensionLabel = NXOpen.Preferences.SketchPreferences.DimensionLabelType.Expression;
theSession.Preferences.Sketch.TextSizeFixed = true;
theSession.Preferences.Sketch.FixedTextSize = 3.0;
theSession.Preferences.Sketch.ConstraintSymbolSize = 3.0;
theSession.Preferences.Sketch.DisplayObjectColor = false;
theSession.Preferences.Sketch.DisplayObjectName = true;
NXOpen.NXObject nXObject2;
nXObject2 = sketchInPlaceBuilder1.Commit();
NXOpen.Sketch sketch1 = (NXOpen.Sketch)nXObject2;
NXOpen.Features.Feature feature1;
feature1 = sketch1.Feature;
NXOpen.Session.UndoMarkId markId9;
markId9 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "update");
int nErrs1;
nErrs1 = theSession.UpdateManager.DoUpdate(markId9);
sketch1.Activate(NXOpen.Sketch.ViewReorient.True);
theSession.DeleteUndoMark(markId8, null);
theSession.SetUndoMarkName(markId6, "Create Sketch");
sketchInPlaceBuilder1.Destroy();
sketchAlongPathBuilder1.Destroy();
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression2);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression1);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
// ----------------------------------------------
// Menu: Insert->Sketch Curve->Line...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId10;
markId10 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Profile short list");
NXOpen.Session.UndoMarkId markId11;
markId11 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");
NXOpen.Expression expression3;
expression3 = workPart.Expressions.CreateSystemExpression(length_string);
theSession.SetUndoMarkVisibility(markId11, "Curve", NXOpen.Session.MarkVisibility.Visible);
NXOpen.Point3d startPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Point3d endPoint1 = new NXOpen.Point3d(length, 0.0, 0.0);
NXOpen.Line line1;
line1 = workPart.Curves.CreateLine(startPoint1, endPoint1);
theSession.ActiveSketch.AddGeometry(line1, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
NXOpen.Sketch.ConstraintGeometry geom1_1 = new NXOpen.Sketch.ConstraintGeometry();
geom1_1.Geometry = line1;
geom1_1.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom1_1.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_1 = new NXOpen.Sketch.ConstraintGeometry();
NXOpen.Features.DatumCsys datumCsys2 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("SKETCH(1:1B)");
NXOpen.Point point3 = (NXOpen.Point)datumCsys2.FindObject("POINT 1");
geom2_1.Geometry = point3;
geom2_1.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom2_1.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint1;
sketchGeometricConstraint1 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_1, geom2_1);
NXOpen.Sketch.ConstraintGeometry geom1 = new NXOpen.Sketch.ConstraintGeometry();
geom1.Geometry = line1;
geom1.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom1.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint2;
sketchGeometricConstraint2 = theSession.ActiveSketch.CreateHorizontalConstraint(geom1);
NXOpen.Sketch.DimensionGeometry dimObject1_1 = new NXOpen.Sketch.DimensionGeometry();
dimObject1_1.Geometry = line1;
dimObject1_1.AssocType = NXOpen.Sketch.AssocType.StartPoint;
dimObject1_1.AssocValue = 0;
dimObject1_1.HelpPoint.X = 0.0;
dimObject1_1.HelpPoint.Y = 0.0;
dimObject1_1.HelpPoint.Z = 0.0;
NXOpen.NXObject nullNXOpen_NXObject = null;
dimObject1_1.View = nullNXOpen_NXObject;
NXOpen.Sketch.DimensionGeometry dimObject2_1 = new NXOpen.Sketch.DimensionGeometry();
dimObject2_1.Geometry = line1;
dimObject2_1.AssocType = NXOpen.Sketch.AssocType.EndPoint;
dimObject2_1.AssocValue = 0;
dimObject2_1.HelpPoint.X = 0.0;
dimObject2_1.HelpPoint.Y = 0.0;
dimObject2_1.HelpPoint.Z = 0.0;
dimObject2_1.View = nullNXOpen_NXObject;
NXOpen.Point3d dimOrigin1 = new NXOpen.Point3d(45.0, -9.0598069411704, 0.0);
NXOpen.SketchDimensionalConstraint sketchDimensionalConstraint1;
sketchDimensionalConstraint1 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_1, dimObject2_1, dimOrigin1, expression3, NXOpen.Sketch.DimensionOption.CreateAsDriving);
NXOpen.SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint1 = (NXOpen.SketchHelpedDimensionalConstraint)sketchDimensionalConstraint1;
NXOpen.Annotations.Dimension dimension1;
dimension1 = sketchHelpedDimensionalConstraint1.AssociatedDimension;
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId12;
markId12 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");
NXOpen.Expression expression4;
expression4 = workPart.Expressions.CreateSystemExpression(heightA_string);
NXOpen.Expression expression5;
expression5 = workPart.Expressions.CreateSystemExpression(length_string);
workPart.Expressions.Edit(expression4, heightA_string);
theSession.SetUndoMarkVisibility(markId12, "Curve", NXOpen.Session.MarkVisibility.Visible);
NXOpen.Point3d startPoint2 = new NXOpen.Point3d(length, 0.0, 0.0);
NXOpen.Point3d endPoint2 = new NXOpen.Point3d(length, heightA, 0.0);
NXOpen.Line line2;
line2 = workPart.Curves.CreateLine(startPoint2, endPoint2);
theSession.ActiveSketch.AddGeometry(line2, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
NXOpen.Sketch.ConstraintGeometry geom1_2 = new NXOpen.Sketch.ConstraintGeometry();
geom1_2.Geometry = line2;
geom1_2.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom1_2.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_2 = new NXOpen.Sketch.ConstraintGeometry();
geom2_2.Geometry = line1;
geom2_2.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom2_2.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint3;
sketchGeometricConstraint3 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_2, geom2_2);
NXOpen.Sketch.ConstraintGeometry geom2 = new NXOpen.Sketch.ConstraintGeometry();
geom2.Geometry = line2;
geom2.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom2.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint4;
sketchGeometricConstraint4 = theSession.ActiveSketch.CreateVerticalConstraint(geom2);
workPart.Expressions.Delete(expression5);
NXOpen.Sketch.DimensionGeometry dimObject1_2 = new NXOpen.Sketch.DimensionGeometry();
dimObject1_2.Geometry = line2;
dimObject1_2.AssocType = NXOpen.Sketch.AssocType.StartPoint;
dimObject1_2.AssocValue = 0;
dimObject1_2.HelpPoint.X = 0.0;
dimObject1_2.HelpPoint.Y = 0.0;
dimObject1_2.HelpPoint.Z = 0.0;
dimObject1_2.View = nullNXOpen_NXObject;
NXOpen.Sketch.DimensionGeometry dimObject2_2 = new NXOpen.Sketch.DimensionGeometry();
dimObject2_2.Geometry = line2;
dimObject2_2.AssocType = NXOpen.Sketch.AssocType.EndPoint;
dimObject2_2.AssocValue = 0;
dimObject2_2.HelpPoint.X = 0.0;
dimObject2_2.HelpPoint.Y = 0.0;
dimObject2_2.HelpPoint.Z = 0.0;
dimObject2_2.View = nullNXOpen_NXObject;
NXOpen.Point3d dimOrigin2 = new NXOpen.Point3d(99.0598069411704, 15.0, 0.0);
NXOpen.SketchDimensionalConstraint sketchDimensionalConstraint2;
sketchDimensionalConstraint2 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_2, dimObject2_2, dimOrigin2, expression4, NXOpen.Sketch.DimensionOption.CreateAsDriving);
NXOpen.SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint2 = (NXOpen.SketchHelpedDimensionalConstraint)sketchDimensionalConstraint2;
NXOpen.Annotations.Dimension dimension2;
dimension2 = sketchHelpedDimensionalConstraint2.AssociatedDimension;
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId13;
markId13 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");
NXOpen.Expression expression6;
expression6 = workPart.Expressions.CreateSystemExpression(heightB_string);
NXOpen.Expression expression7;
expression7 = workPart.Expressions.CreateSystemExpression(length_string);
theSession.SetUndoMarkVisibility(markId13, "Curve", NXOpen.Session.MarkVisibility.Visible);
NXOpen.Point3d startPoint3 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Point3d endPoint3 = new NXOpen.Point3d(7.02873218749514e-014, heightB, 0.0);
NXOpen.Line line3;
line3 = workPart.Curves.CreateLine(startPoint3, endPoint3);
theSession.ActiveSketch.AddGeometry(line3, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
NXOpen.Sketch.ConstraintGeometry geom1_3 = new NXOpen.Sketch.ConstraintGeometry();
geom1_3.Geometry = line3;
geom1_3.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom1_3.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_3 = new NXOpen.Sketch.ConstraintGeometry();
geom2_3.Geometry = line1;
geom2_3.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom2_3.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint5;
sketchGeometricConstraint5 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_3, geom2_3);
NXOpen.Sketch.ConstraintGeometry geom3 = new NXOpen.Sketch.ConstraintGeometry();
geom3.Geometry = line3;
geom3.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom3.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint6;
sketchGeometricConstraint6 = theSession.ActiveSketch.CreateVerticalConstraint(geom3);
workPart.Expressions.Delete(expression7);
NXOpen.Sketch.DimensionGeometry dimObject1_3 = new NXOpen.Sketch.DimensionGeometry();
dimObject1_3.Geometry = line3;
dimObject1_3.AssocType = NXOpen.Sketch.AssocType.StartPoint;
dimObject1_3.AssocValue = 0;
dimObject1_3.HelpPoint.X = 0.0;
dimObject1_3.HelpPoint.Y = 0.0;
dimObject1_3.HelpPoint.Z = 0.0;
dimObject1_3.View = nullNXOpen_NXObject;
NXOpen.Sketch.DimensionGeometry dimObject2_3 = new NXOpen.Sketch.DimensionGeometry();
dimObject2_3.Geometry = line3;
dimObject2_3.AssocType = NXOpen.Sketch.AssocType.EndPoint;
dimObject2_3.AssocValue = 0;
dimObject2_3.HelpPoint.X = 0.0;
dimObject2_3.HelpPoint.Y = 0.0;
dimObject2_3.HelpPoint.Z = 0.0;
dimObject2_3.View = nullNXOpen_NXObject;
NXOpen.Point3d dimOrigin3 = new NXOpen.Point3d(9.05980694117043, heightA, 0.0);
NXOpen.SketchDimensionalConstraint sketchDimensionalConstraint3;
sketchDimensionalConstraint3 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_3, dimObject2_3, dimOrigin3, expression6, NXOpen.Sketch.DimensionOption.CreateAsDriving);
NXOpen.SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint3 = (NXOpen.SketchHelpedDimensionalConstraint)sketchDimensionalConstraint3;
NXOpen.Annotations.Dimension dimension3;
dimension3 = sketchHelpedDimensionalConstraint3.AssociatedDimension;
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId14;
markId14 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");
theSession.SetUndoMarkVisibility(markId14, "Curve", NXOpen.Session.MarkVisibility.Visible);
NXOpen.Point3d startPoint4 = new NXOpen.Point3d(0.0, heightB, 0.0);
NXOpen.Point3d endPoint4 = new NXOpen.Point3d(length, heightA, 0.0);
//NXOpen.Point3d endPoint4 = new NXOpen.Point3d(90.0, 29.9999999999998, 0.0);
NXOpen.Line line4;
line4 = workPart.Curves.CreateLine(startPoint4, endPoint4);
theSession.ActiveSketch.AddGeometry(line4, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
NXOpen.Sketch.ConstraintGeometry geom1_4 = new NXOpen.Sketch.ConstraintGeometry();
geom1_4.Geometry = line4;
geom1_4.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom1_4.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_4 = new NXOpen.Sketch.ConstraintGeometry();
geom2_4.Geometry = line3;
geom2_4.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom2_4.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint7;
sketchGeometricConstraint7 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_4, geom2_4);
NXOpen.Sketch.ConstraintGeometry geom1_5 = new NXOpen.Sketch.ConstraintGeometry();
geom1_5.Geometry = line4;
geom1_5.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom1_5.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_5 = new NXOpen.Sketch.ConstraintGeometry();
geom2_5.Geometry = line2;
geom2_5.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom2_5.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint8;
sketchGeometricConstraint8 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_5, geom2_5);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
// ----------------------------------------------
// Menu: File->Finish Sketch
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId15;
markId15 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Deactivate Sketch");
theSession.ActiveSketch.Deactivate(NXOpen.Sketch.ViewReorient.False, NXOpen.Sketch.UpdateLevel.Model);
// ----------------------------------------------
// Menu: Insert->Design Feature->Extrude...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId16;
markId16 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.Features.Feature nullNXOpen_Features_Feature = null;
if (!workPart.Preferences.Modeling.GetHistoryMode())
{
throw new Exception("Create or edit of a Feature was recorded in History Mode but playback is in History-Free Mode.");
}
NXOpen.Features.ExtrudeBuilder extrudeBuilder1;
extrudeBuilder1 = workPart.Features.CreateExtrudeBuilder(nullNXOpen_Features_Feature);
NXOpen.Section section1;
section1 = workPart.Sections.CreateSection(0.0095, 0.01, 0.5);
extrudeBuilder1.Section = section1;
extrudeBuilder1.AllowSelfIntersectingSection(true);
NXOpen.Unit unit2;
unit2 = extrudeBuilder1.Draft.FrontDraftAngle.Units;
NXOpen.Expression expression8;
expression8 = workPart.Expressions.CreateSystemExpressionWithUnits("2.00", unit2);
extrudeBuilder1.DistanceTolerance = 0.01;
extrudeBuilder1.BooleanOperation.Type = NXOpen.GeometricUtilities.BooleanOperation.BooleanType.Create;
NXOpen.Body[] targetBodies1 = new NXOpen.Body[1];
NXOpen.Body nullNXOpen_Body = null;
targetBodies1[0] = nullNXOpen_Body;
extrudeBuilder1.BooleanOperation.SetTargetBodies(targetBodies1);
extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";
extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = "25";
extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";
extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";
extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";
extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = thickness_string;
extrudeBuilder1.Draft.FrontDraftAngle.RightHandSide = "2";
extrudeBuilder1.Draft.BackDraftAngle.RightHandSide = "2";
extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";
extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";
NXOpen.GeometricUtilities.SmartVolumeProfileBuilder smartVolumeProfileBuilder1;
smartVolumeProfileBuilder1 = extrudeBuilder1.SmartVolumeProfile;
smartVolumeProfileBuilder1.OpenProfileSmartVolumeOption = false;
smartVolumeProfileBuilder1.CloseProfileRule = NXOpen.GeometricUtilities.SmartVolumeProfileBuilder.CloseProfileRuleType.Fci;
theSession.SetUndoMarkName(markId16, "Extrude Dialog");
section1.DistanceTolerance = 0.01;
section1.ChainingTolerance = 0.0095;
section1.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.OnlyCurves);
NXOpen.Session.UndoMarkId markId17;
markId17 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "section mark");
NXOpen.Session.UndoMarkId markId18;
markId18 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, null);
NXOpen.Features.Feature[] features1 = new NXOpen.Features.Feature[1];
NXOpen.Features.SketchFeature sketchFeature1 = (NXOpen.Features.SketchFeature)feature1;
features1[0] = sketchFeature1;
NXOpen.CurveFeatureRule curveFeatureRule1;
curveFeatureRule1 = workPart.ScRuleFactory.CreateRuleCurveFeature(features1);
section1.AllowSelfIntersection(true);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = curveFeatureRule1;
NXOpen.Point3d helpPoint1 = new NXOpen.Point3d(53.8762063337749, 42.0412645554082, 0.0);
section1.AddToSection(rules1, line4, nullNXOpen_NXObject, nullNXOpen_NXObject, helpPoint1, NXOpen.Section.Mode.Create, false);
theSession.DeleteUndoMark(markId18, null);
NXOpen.Direction direction1;
direction1 = workPart.Directions.CreateDirection(sketch1, NXOpen.Sense.Forward, NXOpen.SmartObject.UpdateOption.WithinModeling);
extrudeBuilder1.Direction = direction1;
theSession.DeleteUndoMark(markId17, null);
NXOpen.Session.UndoMarkId markId19;
markId19 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Extrude");
theSession.DeleteUndoMark(markId19, null);
NXOpen.Session.UndoMarkId markId20;
markId20 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Extrude");
extrudeBuilder1.ParentFeatureInternal = false;
NXOpen.Features.Feature feature2;
feature2 = extrudeBuilder1.CommitFeature();
theSession.DeleteUndoMark(markId20, null);
theSession.SetUndoMarkName(markId16, "Extrude");
NXOpen.Expression expression9 = extrudeBuilder1.Limits.StartExtend.Value;
NXOpen.Expression expression10 = extrudeBuilder1.Limits.EndExtend.Value;
extrudeBuilder1.Destroy();
workPart.Expressions.Delete(expression8);
// ----------------------------------------------
// Menu: File->Save
// ----------------------------------------------
NXOpen.PartSaveStatus partSaveStatus1;
partSaveStatus1 = workPart.Save(NXOpen.BasePart.SaveComponents.True, NXOpen.BasePart.CloseAfterSave.False);
partSaveStatus1.Dispose();
// ----------------------------------------------
// Menu: File->Export->IGES...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId21;
markId21 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.IgesCreator igesCreator1;
igesCreator1 = theSession.DexManager.CreateIgesCreator();
igesCreator1.ExportModelData = true;
igesCreator1.ExportDrawings = true;
igesCreator1.MapTabCylToBSurf = true;
igesCreator1.BcurveTol = 0.0508;
igesCreator1.IdenticalPointResolution = 0.001;
igesCreator1.MaxThreeDMdlSpace = 10000.0;
igesCreator1.ObjectTypes.Curves = true;
igesCreator1.ObjectTypes.Surfaces = true;
igesCreator1.ObjectTypes.Annotations = true;
igesCreator1.ObjectTypes.Structures = true;
igesCreator1.ObjectTypes.Solids = true;
igesCreator1.OutputFile = part_name_igs;
igesCreator1.SettingsFile = "C:\\Program Files\\Siemens\\NX 10.0\\iges\\igesexport.def";
igesCreator1.MaxLineThickness = 2.0;
igesCreator1.SysDefmaxThreeDMdlSpace = true;
igesCreator1.SysDefidenticalPointResolution = true;
igesCreator1.InputFile = part_name_prt;
igesCreator1.OutputFile = part_name_igs;
theSession.SetUndoMarkName(markId21, "Export to IGES Options Dialog");
igesCreator1.OutputFile = part_name_igs;
NXOpen.Session.UndoMarkId markId22;
markId22 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Export to IGES Options");
theSession.DeleteUndoMark(markId22, null);
NXOpen.Session.UndoMarkId markId23;
markId23 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Export to IGES Options");
igesCreator1.FileSaveFlag = false;
igesCreator1.LayerMask = "1-256";
igesCreator1.DrawingList = "";
igesCreator1.ViewList = "Top,Front,Right,Back,Bottom,Left,Isometric,Trimetric,User Defined";
NXOpen.NXObject nXObject3;
nXObject3 = igesCreator1.Commit();
theSession.DeleteUndoMark(markId23, null);
theSession.SetUndoMarkName(markId21, "Export to IGES Options");
igesCreator1.Destroy();
// ----------------------------------------------
// Menu: Tools->Journal->Stop Recording
// ----------------------------------------------
Console.WriteLine("Finishing NX Golden Cantilever Journal");
}
public static void Main(string[] args)
{
NXOpen.Session theSession = NXOpen.Session.GetSession();
// ----------------------------------------------
// Menu: File->New...
// ----------------------------------------------
//Variable Declaration
double a = double.Parse(args[0]);
double G = 1.618;
double b = G * a;
double L = 10;
double t = double.Parse(args[1]);
NXOpen.FileNew fileNew1;
fileNew1 = theSession.Parts.FileNew();
fileNew1.TemplateFileName = "model-plain-1-mm-template.prt";
fileNew1.UseBlankTemplate = false;
fileNew1.ApplicationName = "ModelTemplate";
fileNew1.Units = NXOpen.Part.Units.Millimeters;
fileNew1.RelationType = "";
fileNew1.UsesMasterModel = "No";
fileNew1.TemplateType = NXOpen.FileNewTemplateType.Item;
fileNew1.TemplatePresentationName = "Model";
fileNew1.ItemType = "";
fileNew1.Specialization = "";
fileNew1.SetCanCreateAltrep(false);
fileNew1.NewFileName = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.prt";
fileNew1.MasterFileName = "";
fileNew1.MakeDisplayedPart = true;
NXOpen.NXObject nXObject1;
nXObject1 = fileNew1.Commit();
NXOpen.Part workPart = theSession.Parts.Work;
NXOpen.Part displayPart = theSession.Parts.Display;
fileNew1.Destroy();
theSession.ApplicationSwitchImmediate("UG_APP_MODELING");
// ----------------------------------------------
// Menu: Insert->Sketch...
// ----------------------------------------------
NXOpen.Sketch nullNXOpen_Sketch = null;
NXOpen.SketchInPlaceBuilder sketchInPlaceBuilder1;
sketchInPlaceBuilder1 = workPart.Sketches.CreateNewSketchInPlaceBuilder(nullNXOpen_Sketch);
NXOpen.Unit unit1 = (NXOpen.Unit)workPart.UnitCollection.FindObject("MilliMeter");
NXOpen.Expression expression1;
expression1 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Expression expression2;
expression2 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.SketchAlongPathBuilder sketchAlongPathBuilder1;
sketchAlongPathBuilder1 = workPart.Sketches.CreateSketchAlongPathBuilder(nullNXOpen_Sketch);
sketchAlongPathBuilder1.PlaneLocation.Expression.RightHandSide = "0";
NXOpen.DatumPlane datumPlane1 = (NXOpen.DatumPlane)workPart.Datums.FindObject("DATUM_CSYS(0) YZ plane");
NXOpen.Point3d point1 = new NXOpen.Point3d(0, 0, 0);
sketchInPlaceBuilder1.PlaneOrFace.SetValue(datumPlane1, workPart.ModelingViews.WorkView, point1);
NXOpen.Features.DatumCsys datumCsys1 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("DATUM_CSYS(0)");
NXOpen.Point point2 = (NXOpen.Point)datumCsys1.FindObject("POINT 1");
sketchInPlaceBuilder1.SketchOrigin = point2;
sketchInPlaceBuilder1.PlaneOrFace.Value = null;
sketchInPlaceBuilder1.PlaneOrFace.Value = datumPlane1;
NXOpen.DatumAxis datumAxis1 = (NXOpen.DatumAxis)workPart.Datums.FindObject("DATUM_CSYS(0) X axis");
sketchInPlaceBuilder1.Axis.Value = datumAxis1;
theSession.Preferences.Sketch.CreateInferredConstraints = true;
theSession.Preferences.Sketch.ContinuousAutoDimensioning = true;
theSession.Preferences.Sketch.DimensionLabel = NXOpen.Preferences.SketchPreferences.DimensionLabelType.Expression;
theSession.Preferences.Sketch.TextSizeFixed = true;
theSession.Preferences.Sketch.FixedTextSize = 3.0;
theSession.Preferences.Sketch.ConstraintSymbolSize = 3.0;
theSession.Preferences.Sketch.DisplayObjectColor = false;
theSession.Preferences.Sketch.DisplayObjectName = true;
NXOpen.NXObject nXObject2;
nXObject2 = sketchInPlaceBuilder1.Commit();
NXOpen.Sketch sketch1 = (NXOpen.Sketch)nXObject2;
NXOpen.Features.Feature feature1;
feature1 = sketch1.Feature;
sketch1.Activate(NXOpen.Sketch.ViewReorient.True);
sketchInPlaceBuilder1.Destroy();
sketchAlongPathBuilder1.Destroy();
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression2);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression1);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
// ----------------------------------------------
// Menu: Insert->Sketch Curve->Line...
// ----------------------------------------------
NXOpen.Point3d startPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Point3d endPoint1 = new NXOpen.Point3d(0, b, 0.0);
NXOpen.Line line1;
line1 = workPart.Curves.CreateLine(startPoint1, endPoint1);
theSession.ActiveSketch.AddGeometry(line1, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
//
NXOpen.Point3d startPoint2 = new NXOpen.Point3d(0.0, b, 0.0);
NXOpen.Point3d endPoint2 = new NXOpen.Point3d(L, a, 0.0);
NXOpen.Line line2;
line2 = workPart.Curves.CreateLine(startPoint2, endPoint2);
theSession.ActiveSketch.AddGeometry(line2, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Point3d startPoint3 = new NXOpen.Point3d(L, a, 0.0);
NXOpen.Point3d endPoint3 = new NXOpen.Point3d(L, 0.0, 0.0);
NXOpen.Line line3;
line3 = workPart.Curves.CreateLine(startPoint3, endPoint3);
theSession.ActiveSketch.AddGeometry(line3, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Point3d startPoint4 = new NXOpen.Point3d(L, 0.0, 0.0);
NXOpen.Point3d endPoint4 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Line line4;
line4 = workPart.Curves.CreateLine(startPoint4, endPoint4);
theSession.ActiveSketch.AddGeometry(line4, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
// ----------------------------------------------
// Menu: File->Finish Sketch
// ----------------------------------------------
theSession.ActiveSketch.Deactivate(NXOpen.Sketch.ViewReorient.False, NXOpen.Sketch.UpdateLevel.Model);
// ----------------------------------------------
// Menu: Insert->Design Feature->Extrude...
// ----------------------------------------------
NXOpen.Features.Feature nullNXOpen_Features_Feature = null;
if (!workPart.Preferences.Modeling.GetHistoryMode())
{
throw new Exception("Create or edit of a Feature was recorded in History Mode but playback is in History-Free Mode.");
}
NXOpen.Features.ExtrudeBuilder extrudeBuilder1;
extrudeBuilder1 = workPart.Features.CreateExtrudeBuilder(nullNXOpen_Features_Feature);
NXOpen.Section section1;
section1 = workPart.Sections.CreateSection(0.0095, 0.01, 0.5);
extrudeBuilder1.Section = section1;
extrudeBuilder1.AllowSelfIntersectingSection(true);
NXOpen.Unit unit2;
unit2 = extrudeBuilder1.Draft.FrontDraftAngle.Units;
NXOpen.Expression expression7;
expression7 = workPart.Expressions.CreateSystemExpressionWithUnits("2.00", unit2);
extrudeBuilder1.DistanceTolerance = 0.01;
extrudeBuilder1.BooleanOperation.Type = NXOpen.GeometricUtilities.BooleanOperation.BooleanType.Create;
NXOpen.Body[] targetBodies1 = new NXOpen.Body[1];
NXOpen.Body nullNXOpen_Body = null;
targetBodies1[0] = nullNXOpen_Body;
extrudeBuilder1.BooleanOperation.SetTargetBodies(targetBodies1);
extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";
extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = t.ToString();
extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";
extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";
NXOpen.GeometricUtilities.SmartVolumeProfileBuilder smartVolumeProfileBuilder1;
smartVolumeProfileBuilder1 = extrudeBuilder1.SmartVolumeProfile;
smartVolumeProfileBuilder1.OpenProfileSmartVolumeOption = false;
smartVolumeProfileBuilder1.CloseProfileRule = NXOpen.GeometricUtilities.SmartVolumeProfileBuilder.CloseProfileRuleType.Fci;
section1.DistanceTolerance = 0.01;
section1.ChainingTolerance = 0.0095;
section1.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.OnlyCurves);
NXOpen.Features.Feature[] features1 = new NXOpen.Features.Feature[1];
NXOpen.Features.SketchFeature sketchFeature1 = (NXOpen.Features.SketchFeature)feature1;
features1[0] = sketchFeature1;
NXOpen.CurveFeatureRule curveFeatureRule1;
curveFeatureRule1 = workPart.ScRuleFactory.CreateRuleCurveFeature(features1);
section1.AllowSelfIntersection(true);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = curveFeatureRule1;
NXOpen.Point3d helpPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
section1.AddToSection(rules1, null, null, null, helpPoint1, NXOpen.Section.Mode.Create, false);
NXOpen.Direction direction1;
direction1 = workPart.Directions.CreateDirection(sketch1, NXOpen.Sense.Forward, NXOpen.SmartObject.UpdateOption.WithinModeling);
extrudeBuilder1.Direction = direction1;
extrudeBuilder1.ParentFeatureInternal = false;
NXOpen.Features.Feature feature2;
feature2 = extrudeBuilder1.CommitFeature();
NXOpen.Expression expression8 = extrudeBuilder1.Limits.StartExtend.Value;
NXOpen.Expression expression9 = extrudeBuilder1.Limits.EndExtend.Value;
extrudeBuilder1.Destroy();
workPart.Expressions.Delete(expression7);
// ----------------------------------------------
// Menu: Tools->Journal->Stop Recording
// ----------------------------------------------
// ----------------------------------------------
// Menu: File->Export->IGES...
// ----------------------------------------------
NXOpen.IgesCreator igesCreator1;
igesCreator1 = theSession.DexManager.CreateIgesCreator();
igesCreator1.ExportModelData = true;
igesCreator1.ExportDrawings = true;
igesCreator1.MapTabCylToBSurf = true;
igesCreator1.BcurveTol = 0.0508;
igesCreator1.IdenticalPointResolution = 0.001;
igesCreator1.MaxThreeDMdlSpace = 10000.0;
igesCreator1.ObjectTypes.Curves = true;
igesCreator1.ObjectTypes.Surfaces = true;
igesCreator1.ObjectTypes.Annotations = true;
igesCreator1.ObjectTypes.Structures = true;
igesCreator1.ObjectTypes.Solids = true;
igesCreator1.SettingsFile = "C:\\Program Files\\Siemens\\NX 10.0\\iges\\igesexport.def";
igesCreator1.MaxLineThickness = 2.0;
igesCreator1.SysDefmaxThreeDMdlSpace = true;
igesCreator1.SysDefidenticalPointResolution = true;
igesCreator1.InputFile = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs";
igesCreator1.OutputFile = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs";
igesCreator1.FileSaveFlag = false;
igesCreator1.LayerMask = "1-256";
igesCreator1.DrawingList = "";
NXOpen.TaggedObject[] objects1 = new NXOpen.TaggedObject[0];
igesCreator1.SetDrawingArray(objects1);
NXOpen.NXObject nXObject20;
nXObject20 = igesCreator1.Commit();
igesCreator1.Destroy();
while (!System.IO.File.Exists("J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs"))
{
System.Threading.Thread.Sleep(10);
}
}
public static void Main(string[] args)
{
Console.WriteLine("Starting NX Journal");
//Declare Part Variables
//Convert Strings to doubles from the args
double length = System.Convert.ToDouble(args[0]);
double width = System.Convert.ToDouble(args[1]);
double height = System.Convert.ToDouble(args[2]);
string part_name = args[3];
//Measurements need to be converted from m to mm
length = 1000 * length;
width = 1000 * width;
height = 1000 * height;
//Convert necessary values to string.
string length_string = System.Convert.ToString(length);
string width_string = System.Convert.ToString(width);
string height_string = System.Convert.ToString(height);
Session theSession = Session.GetSession();
// ----------------------------------------------
// Menu: File->New...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId1;
markId1 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
FileNew fileNew1;
fileNew1 = theSession.Parts.FileNew();
theSession.SetUndoMarkName(markId1, "New Dialog");
NXOpen.Session.UndoMarkId markId2;
markId2 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "New");
theSession.DeleteUndoMark(markId2, null);
NXOpen.Session.UndoMarkId markId3;
markId3 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "New");
fileNew1.TemplateFileName = "model-plain-1-mm-template.prt";
fileNew1.ApplicationName = "ModelTemplate";
fileNew1.Units = NXOpen.Part.Units.Millimeters;
fileNew1.RelationType = "";
fileNew1.UsesMasterModel = "No";
fileNew1.TemplateType = FileNewTemplateType.Item;
fileNew1.NewFileName = part_name;
fileNew1.MasterFileName = "";
fileNew1.UseBlankTemplate = false;
fileNew1.MakeDisplayedPart = true;
NXObject nXObject1;
nXObject1 = fileNew1.Commit();
Part workPart = theSession.Parts.Work;
Part displayPart = theSession.Parts.Display;
theSession.DeleteUndoMark(markId3, null);
fileNew1.Destroy();
NXOpen.Session.UndoMarkId markId4;
markId4 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Enter Modeling");
// ----------------------------------------------
// Menu: Insert->Sketch...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId5;
markId5 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
Sketch nullSketch = null;
SketchInPlaceBuilder sketchInPlaceBuilder1;
sketchInPlaceBuilder1 = workPart.Sketches.CreateNewSketchInPlaceBuilder(nullSketch);
Unit unit1 = (Unit)workPart.UnitCollection.FindObject("MilliMeter");
Expression expression1;
expression1 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
Expression expression2;
expression2 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
SketchAlongPathBuilder sketchAlongPathBuilder1;
sketchAlongPathBuilder1 = workPart.Sketches.CreateSketchAlongPathBuilder(nullSketch);
sketchAlongPathBuilder1.PlaneLocation.Expression.RightHandSide = "0";
theSession.SetUndoMarkName(markId5, "Create Sketch Dialog");
DatumPlane datumPlane1 = (DatumPlane)workPart.Datums.FindObject("DATUM_CSYS(0) XY plane");
Point3d point1 = new Point3d(26.3626531592029, 1.06581410364015e-014, 30.438226401797);
sketchInPlaceBuilder1.PlaneOrFace.SetValue(datumPlane1, workPart.ModelingViews.WorkView, point1);
NXOpen.Features.DatumCsys datumCsys1 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("DATUM_CSYS(0)");
Point point2 = (Point)datumCsys1.FindObject("POINT 1");
sketchInPlaceBuilder1.SketchOrigin = point2;
sketchInPlaceBuilder1.PlaneOrFace.Value = null;
sketchInPlaceBuilder1.PlaneOrFace.Value = datumPlane1;
sketchInPlaceBuilder1.ReversePlaneNormal = true;
DatumAxis datumAxis1 = (DatumAxis)workPart.Datums.FindObject("DATUM_CSYS(0) X axis");
sketchInPlaceBuilder1.Axis.Value = datumAxis1;
NXOpen.Session.UndoMarkId markId6;
markId6 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Create Sketch");
theSession.DeleteUndoMark(markId6, null);
NXOpen.Session.UndoMarkId markId7;
markId7 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Create Sketch");
theSession.Preferences.Sketch.CreateInferredConstraints = true;
theSession.Preferences.Sketch.ContinuousAutoDimensioning = true;
theSession.Preferences.Sketch.DimensionLabel = NXOpen.Preferences.SketchPreferences.DimensionLabelType.Expression;
theSession.Preferences.Sketch.TextSizeFixed = true;
theSession.Preferences.Sketch.FixedTextSize = 3.0;
theSession.Preferences.Sketch.ConstraintSymbolSize = 3.0;
theSession.Preferences.Sketch.DisplayObjectColor = false;
theSession.Preferences.Sketch.DisplayObjectName = true;
NXObject nXObject2;
nXObject2 = sketchInPlaceBuilder1.Commit();
Sketch sketch1 = (Sketch)nXObject2;
NXOpen.Features.Feature feature1;
feature1 = sketch1.Feature;
NXOpen.Session.UndoMarkId markId8;
markId8 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "update");
int nErrs1;
nErrs1 = theSession.UpdateManager.DoUpdate(markId8);
sketch1.Activate(NXOpen.Sketch.ViewReorient.True);
theSession.DeleteUndoMark(markId7, null);
theSession.SetUndoMarkName(markId5, "Create Sketch");
sketchInPlaceBuilder1.Destroy();
sketchAlongPathBuilder1.Destroy();
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression2);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression1);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
// ----------------------------------------------
// Menu: Insert->Sketch Curve->Rectangle...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId9;
markId9 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Profile short list");
NXOpen.Session.UndoMarkId markId10;
markId10 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Create Rectangle");
Expression expression3;
expression3 = workPart.Expressions.CreateSystemExpression(width_string);
theSession.SetUndoMarkVisibility(markId10, "Create Rectangle", NXOpen.Session.MarkVisibility.Visible);
// ----------------------------------------------
// Creating rectangle using By 2 Points method
// ----------------------------------------------
Point3d startPoint1 = new Point3d(0.0, 0.0, 0.0);
Point3d endPoint1 = new Point3d(width, 0.0, 0.0);
Line line1;
line1 = workPart.Curves.CreateLine(startPoint1, endPoint1);
Point3d startPoint2 = new Point3d(width, 0.0, 0.0);
Point3d endPoint2 = new Point3d(width, 0.0, height);
Line line2;
line2 = workPart.Curves.CreateLine(startPoint2, endPoint2);
Point3d startPoint3 = new Point3d(width, 0.0, height);
Point3d endPoint3 = new Point3d(0.0, 0.0, height);
Line line3;
line3 = workPart.Curves.CreateLine(startPoint3, endPoint3);
Point3d startPoint4 = new Point3d(0.0, 0.0, height);
Point3d endPoint4 = new Point3d(0.0, 0.0, 0.0);
Line line4;
line4 = workPart.Curves.CreateLine(startPoint4, endPoint4);
theSession.ActiveSketch.AddGeometry(line1, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.ActiveSketch.AddGeometry(line2, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.ActiveSketch.AddGeometry(line3, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.ActiveSketch.AddGeometry(line4, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
NXOpen.Sketch.ConstraintGeometry geom1_1;
geom1_1.Geometry = line1;
geom1_1.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom1_1.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_1;
geom2_1.Geometry = line2;
geom2_1.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom2_1.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint1;
sketchGeometricConstraint1 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_1, geom2_1);
NXOpen.Sketch.ConstraintGeometry geom1_2;
geom1_2.Geometry = line2;
geom1_2.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom1_2.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_2;
geom2_2.Geometry = line3;
geom2_2.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom2_2.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint2;
sketchGeometricConstraint2 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_2, geom2_2);
NXOpen.Sketch.ConstraintGeometry geom1_3;
geom1_3.Geometry = line3;
geom1_3.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom1_3.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_3;
geom2_3.Geometry = line4;
geom2_3.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom2_3.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint3;
sketchGeometricConstraint3 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_3, geom2_3);
NXOpen.Sketch.ConstraintGeometry geom1_4;
geom1_4.Geometry = line4;
geom1_4.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom1_4.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_4;
geom2_4.Geometry = line1;
geom2_4.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom2_4.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint4;
sketchGeometricConstraint4 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_4, geom2_4);
NXOpen.Sketch.ConstraintGeometry geom1;
geom1.Geometry = line1;
geom1.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom1.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint5;
sketchGeometricConstraint5 = theSession.ActiveSketch.CreateHorizontalConstraint(geom1);
NXOpen.Sketch.ConstraintGeometry conGeom1_1;
conGeom1_1.Geometry = line1;
conGeom1_1.PointType = NXOpen.Sketch.ConstraintPointType.None;
conGeom1_1.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry conGeom2_1;
conGeom2_1.Geometry = line2;
conGeom2_1.PointType = NXOpen.Sketch.ConstraintPointType.None;
conGeom2_1.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint6;
sketchGeometricConstraint6 = theSession.ActiveSketch.CreatePerpendicularConstraint(conGeom1_1, conGeom2_1);
NXOpen.Sketch.ConstraintGeometry conGeom1_2;
conGeom1_2.Geometry = line2;
conGeom1_2.PointType = NXOpen.Sketch.ConstraintPointType.None;
conGeom1_2.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry conGeom2_2;
conGeom2_2.Geometry = line3;
conGeom2_2.PointType = NXOpen.Sketch.ConstraintPointType.None;
conGeom2_2.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint7;
sketchGeometricConstraint7 = theSession.ActiveSketch.CreatePerpendicularConstraint(conGeom1_2, conGeom2_2);
NXOpen.Sketch.ConstraintGeometry conGeom1_3;
conGeom1_3.Geometry = line3;
conGeom1_3.PointType = NXOpen.Sketch.ConstraintPointType.None;
conGeom1_3.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry conGeom2_3;
conGeom2_3.Geometry = line4;
conGeom2_3.PointType = NXOpen.Sketch.ConstraintPointType.None;
conGeom2_3.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint8;
sketchGeometricConstraint8 = theSession.ActiveSketch.CreatePerpendicularConstraint(conGeom1_3, conGeom2_3);
NXOpen.Sketch.ConstraintGeometry conGeom1_4;
conGeom1_4.Geometry = line4;
conGeom1_4.PointType = NXOpen.Sketch.ConstraintPointType.None;
conGeom1_4.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry conGeom2_4;
conGeom2_4.Geometry = line1;
conGeom2_4.PointType = NXOpen.Sketch.ConstraintPointType.None;
conGeom2_4.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint9;
sketchGeometricConstraint9 = theSession.ActiveSketch.CreatePerpendicularConstraint(conGeom1_4, conGeom2_4);
NXOpen.Sketch.ConstraintGeometry geom1_5;
geom1_5.Geometry = line1;
geom1_5.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom1_5.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_5;
geom2_5.Geometry = point2;
geom2_5.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom2_5.SplineDefiningPointIndex = 0;
SketchGeometricConstraint sketchGeometricConstraint10;
sketchGeometricConstraint10 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_5, geom2_5);
NXOpen.Sketch.DimensionGeometry dimObject1_1;
dimObject1_1.Geometry = line3;
dimObject1_1.AssocType = NXOpen.Sketch.AssocType.StartPoint;
dimObject1_1.AssocValue = 0;
dimObject1_1.HelpPoint.X = 0.0;
dimObject1_1.HelpPoint.Y = 0.0;
dimObject1_1.HelpPoint.Z = 0.0;
NXObject nullNXObject = null;
dimObject1_1.View = nullNXObject;
NXOpen.Sketch.DimensionGeometry dimObject2_1;
dimObject2_1.Geometry = line3;
dimObject2_1.AssocType = NXOpen.Sketch.AssocType.EndPoint;
dimObject2_1.AssocValue = 0;
dimObject2_1.HelpPoint.X = 0.0;
dimObject2_1.HelpPoint.Y = 0.0;
dimObject2_1.HelpPoint.Z = 0.0;
dimObject2_1.View = nullNXObject;
Point3d dimOrigin1 = new Point3d(25.0, 0.0, 149.651881900218);
SketchDimensionalConstraint sketchDimensionalConstraint1;
sketchDimensionalConstraint1 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_1, dimObject2_1, dimOrigin1, expression3, NXOpen.Sketch.DimensionOption.CreateAsDriving);
SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint1 = (SketchHelpedDimensionalConstraint)sketchDimensionalConstraint1;
NXOpen.Annotations.Dimension dimension1;
dimension1 = sketchHelpedDimensionalConstraint1.AssociatedDimension;
NXOpen.Sketch.DimensionGeometry dimObject1_2;
dimObject1_2.Geometry = line2;
dimObject1_2.AssocType = NXOpen.Sketch.AssocType.StartPoint;
dimObject1_2.AssocValue = 0;
dimObject1_2.HelpPoint.X = 0.0;
dimObject1_2.HelpPoint.Y = 0.0;
dimObject1_2.HelpPoint.Z = 0.0;
dimObject1_2.View = nullNXObject;
NXOpen.Sketch.DimensionGeometry dimObject2_2;
dimObject2_2.Geometry = line2;
dimObject2_2.AssocType = NXOpen.Sketch.AssocType.EndPoint;
dimObject2_2.AssocValue = 0;
dimObject2_2.HelpPoint.X = 0.0;
dimObject2_2.HelpPoint.Y = 0.0;
dimObject2_2.HelpPoint.Z = 0.0;
dimObject2_2.View = nullNXObject;
Point3d dimOrigin2 = new Point3d(74.651881900218, 0.0, 62.5);
Expression nullExpression = null;
SketchDimensionalConstraint sketchDimensionalConstraint2;
sketchDimensionalConstraint2 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_2, dimObject2_2, dimOrigin2, nullExpression, NXOpen.Sketch.DimensionOption.CreateAsAutomatic);
SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint2 = (SketchHelpedDimensionalConstraint)sketchDimensionalConstraint2;
NXOpen.Annotations.Dimension dimension2;
dimension2 = sketchHelpedDimensionalConstraint2.AssociatedDimension;
Expression expression4;
expression4 = sketchHelpedDimensionalConstraint2.AssociatedExpression;
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
SmartObject[] geoms1 = new SmartObject[4];
geoms1[0] = line1;
geoms1[1] = line2;
geoms1[2] = line3;
geoms1[3] = line4;
theSession.ActiveSketch.UpdateConstraintDisplay(geoms1);
SmartObject[] geoms2 = new SmartObject[4];
geoms2[0] = line1;
geoms2[1] = line2;
geoms2[2] = line3;
geoms2[3] = line4;
theSession.ActiveSketch.UpdateDimensionDisplay(geoms2);
// ----------------------------------------------
// Menu: File->Finish Sketch
// ----------------------------------------------
theSession.ActiveSketch.Deactivate(NXOpen.Sketch.ViewReorient.False, NXOpen.Sketch.UpdateLevel.Model);
// ----------------------------------------------
// Menu: Insert->Design Feature->Extrude...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId11;
markId11 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.Features.Feature nullFeatures_Feature = null;
if (!workPart.Preferences.Modeling.GetHistoryMode())
{
throw new Exception("Create or edit of a Feature was recorded in History Mode but playback is in History-Free Mode.");
}
NXOpen.Features.ExtrudeBuilder extrudeBuilder1;
extrudeBuilder1 = workPart.Features.CreateExtrudeBuilder(nullFeatures_Feature);
Section section1;
section1 = workPart.Sections.CreateSection(0.0095, 0.01, 0.5);
extrudeBuilder1.Section = section1;
extrudeBuilder1.AllowSelfIntersectingSection(true);
Unit unit2;
unit2 = extrudeBuilder1.Draft.FrontDraftAngle.Units;
Expression expression5;
expression5 = workPart.Expressions.CreateSystemExpressionWithUnits("2.00", unit2);
extrudeBuilder1.DistanceTolerance = 0.01;
extrudeBuilder1.BooleanOperation.Type = NXOpen.GeometricUtilities.BooleanOperation.BooleanType.Create;
Body[] targetBodies1 = new Body[1];
Body nullBody = null;
targetBodies1[0] = nullBody;
extrudeBuilder1.BooleanOperation.SetTargetBodies(targetBodies1);
extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";
extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = "25";
extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";
extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";
extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";
extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = length_string;
extrudeBuilder1.Draft.FrontDraftAngle.RightHandSide = "2";
extrudeBuilder1.Draft.BackDraftAngle.RightHandSide = "2";
extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";
extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";
NXOpen.GeometricUtilities.SmartVolumeProfileBuilder smartVolumeProfileBuilder1;
smartVolumeProfileBuilder1 = extrudeBuilder1.SmartVolumeProfile;
smartVolumeProfileBuilder1.OpenProfileSmartVolumeOption = false;
smartVolumeProfileBuilder1.CloseProfileRule = NXOpen.GeometricUtilities.SmartVolumeProfileBuilder.CloseProfileRuleType.Fci;
theSession.SetUndoMarkName(markId11, "Extrude Dialog");
section1.DistanceTolerance = 0.01;
section1.ChainingTolerance = 0.0095;
section1.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.OnlyCurves);
NXOpen.Session.UndoMarkId markId12;
markId12 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "section mark");
NXOpen.Session.UndoMarkId markId13;
markId13 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, null);
NXOpen.Features.Feature[] features1 = new NXOpen.Features.Feature[1];
NXOpen.Features.SketchFeature sketchFeature1 = (NXOpen.Features.SketchFeature)feature1;
features1[0] = sketchFeature1;
CurveFeatureRule curveFeatureRule1;
curveFeatureRule1 = workPart.ScRuleFactory.CreateRuleCurveFeature(features1);
section1.AllowSelfIntersection(true);
SelectionIntentRule[] rules1 = new SelectionIntentRule[1];
rules1[0] = curveFeatureRule1;
Point3d helpPoint1 = new Point3d(23.553389477581, 0.0, height);
section1.AddToSection(rules1, line3, nullNXObject, nullNXObject, helpPoint1, NXOpen.Section.Mode.Create, false);
theSession.DeleteUndoMark(markId13, null);
Direction direction1;
direction1 = workPart.Directions.CreateDirection(sketch1, Sense.Forward, NXOpen.SmartObject.UpdateOption.WithinModeling);
extrudeBuilder1.Direction = direction1;
theSession.DeleteUndoMark(markId12, null);
NXOpen.Session.UndoMarkId markId14;
markId14 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Extrude");
theSession.DeleteUndoMark(markId14, null);
NXOpen.Session.UndoMarkId markId15;
markId15 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Extrude");
extrudeBuilder1.ParentFeatureInternal = false;
NXOpen.Features.Feature feature2;
feature2 = extrudeBuilder1.CommitFeature();
theSession.DeleteUndoMark(markId15, null);
theSession.SetUndoMarkName(markId11, "Extrude");
Expression expression6 = extrudeBuilder1.Limits.StartExtend.Value;
Expression expression7 = extrudeBuilder1.Limits.EndExtend.Value;
extrudeBuilder1.Destroy();
workPart.Expressions.Delete(expression5);
// ----------------------------------------------
// Menu: Analysis->Measure Bodies...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId16;
markId16 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
MeasureBodyBuilder measureBodyBuilder1;
measureBodyBuilder1 = workPart.MeasureManager.CreateMeasureBodyBuilder(nullNXObject);
theSession.SetUndoMarkName(markId16, "Measure Bodies Dialog");
Body[] bodies1 = new Body[1];
Body body1 = (Body)workPart.Bodies.FindObject("EXTRUDE(2)");
bodies1[0] = body1;
BodyDumbRule bodyDumbRule1;
bodyDumbRule1 = workPart.ScRuleFactory.CreateRuleBodyDumb(bodies1, true);
SelectionIntentRule[] rules2 = new SelectionIntentRule[1];
rules2[0] = bodyDumbRule1;
measureBodyBuilder1.BodyCollector.ReplaceRules(rules2, false);
NXOpen.Session.UndoMarkId markId17;
markId17 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Measure Bodies");
theSession.DeleteUndoMark(markId17, null);
NXOpen.Session.UndoMarkId markId18;
markId18 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Measure Bodies");
theSession.DeleteUndoMark(markId18, null);
theSession.SetUndoMarkName(markId16, "Measure Bodies");
measureBodyBuilder1.Destroy();
MeasureBodies measureBodies1 = workPart.MeasureManager.NewMassProperties(workPart.UnitCollection.ToArray(), 1.0, bodies1);
//Console.WriteLine(measureBodies1.Volume);
// ----------------------------------------------
// Menu: File->Save
// ----------------------------------------------
PartSaveStatus partSaveStatus1;
partSaveStatus1 = workPart.Save(NXOpen.BasePart.SaveComponents.True, NXOpen.BasePart.CloseAfterSave.False);
partSaveStatus1.Dispose();
// ----------------------------------------------
// Menu: Tools->Journal->Stop Recording
// ----------------------------------------------
Console.WriteLine("Finishing NX Journal. Part Saved.");
//Write output file with dimensions of beam in current directory
File.WriteAllText("Optimum_beam_dimensions.txt",
"Volume of Optimal Beam = " + ((measureBodies1.Volume) / 1000000000) + "m^3\r\nLength = 2m" +
"\r\nWidth = " + (width / 1000) + "m\r\nHeight = " + (height / 1000) + "m");
Console.WriteLine("Beam dimensions written to file.");
}