protected override void InitDiagram()
{
base.InitDiagram();
m_DrawingDocument.HistoryService.Pause();
try
{
NDrawing drawing = m_DrawingDocument.Content;
NPage activePage = drawing.ActivePage;
// Hide grid and ports
drawing.ScreenVisibility.ShowGrid = false;
drawing.ScreenVisibility.ShowPorts = false;
// Create all shapes
NArrowShapeFactory factory = new NArrowShapeFactory();
factory.DefaultSize = new NSize(60, 60);
int row = 0, col = 0;
double cellWidth = 180;
double cellHeight = 120;
for (int i = 0; i < factory.ShapeCount; i++, col++)
{
NShape shape = factory.CreateShape(i);
shape.HorizontalPlacement = ENHorizontalPlacement.Center;
shape.VerticalPlacement = ENVerticalPlacement.Center;
shape.Text = factory.GetShapeInfo(i).Name;
MoveTextBelowShape(shape);
activePage.Items.Add(shape);
if (col >= 5)
{
row++;
col = 0;
}
NPoint beginPoint = new NPoint(50 + col * cellWidth, 50 + row * cellHeight);
if (shape.ShapeType == ENShapeType.Shape1D)
{
NPoint endPoint = beginPoint + new NPoint(cellWidth - 100, cellHeight - 100);
shape.SetBeginPoint(beginPoint);
shape.SetEndPoint(endPoint);
}
else
{
shape.SetBounds(beginPoint.X, beginPoint.Y, shape.Width, shape.Height);
}
}
// size page to content
activePage.Layout.ContentPadding = new NMargins(40);
activePage.SizeToContent();
}
finally
{
m_DrawingDocument.HistoryService.Resume();
}
}
protected override void InitDiagram()
{
const double XStep = 150;
const double YStep = 100;
base.InitDiagram();
m_DrawingDocument.HistoryService.Pause();
try
{
NDrawing drawing = m_DrawingDocument.Content;
NPage activePage = drawing.ActivePage;
// Hide grid and ports
drawing.ScreenVisibility.ShowGrid = false;
drawing.ScreenVisibility.ShowPorts = false;
// Create all shapes
NCalloutShapeFactory factory = new NCalloutShapeFactory();
factory.DefaultSize = new NSize(70, 70);
double x = 0;
double y = 0;
for (int i = 0; i < factory.ShapeCount; i++)
{
NShape shape = factory.CreateShape(i);
shape.HorizontalPlacement = ENHorizontalPlacement.Center;
shape.VerticalPlacement = ENVerticalPlacement.Center;
shape.Tooltip = new NTooltip(factory.GetShapeInfo(i).Name);
activePage.Items.Add(shape);
if (shape.ShapeType == ENShapeType.Shape1D)
{
shape.SetBeginPoint(new NPoint(x, y));
shape.SetEndPoint(new NPoint(x + shape.Width, y + shape.Height));
}
else
{
shape.SetBounds(x, y, shape.Width, shape.Height);
}
x += XStep;
if (x > activePage.Width)
{
x = 0;
y += YStep;
}
}
// size page to content
activePage.Layout.ContentPadding = new NMargins(70, 60, 70, 60);
activePage.SizeToContent();
}
finally
{
m_DrawingDocument.HistoryService.Resume();
}
}
protected override void InitDiagram()
{
base.InitDiagram();
NDrawing drawing = m_DrawingDocument.Content;
NPage activePage = drawing.ActivePage;
activePage.Layout.ContentPadding = new NMargins(20);
// switch selected edit mode to geometry
// this instructs the diagram to show geometry handles for the selected shapes.
drawing.ScreenVisibility.ShowGrid = false;
NConnectorShapeFactory connectorShapes = new NConnectorShapeFactory();
ENArrowheadShape[] arrowheadShapes = NEnum.GetValues <ENArrowheadShape>();
double x = 20;
double y = 0;
for (int i = 1; i < arrowheadShapes.Length; i++)
{
ENArrowheadShape arrowheadShape = arrowheadShapes[i];
NShape shape = connectorShapes.CreateShape(ENConnectorShape.Line);
drawing.ActivePage.Items.Add(shape);
// create geometry arrowheads
shape.Geometry.BeginArrowhead = new NArrowhead(arrowheadShape);
shape.Geometry.EndArrowhead = new NArrowhead(arrowheadShape);
shape.Text = NEnum.GetLocalizedString(arrowheadShape);
shape.SetBeginPoint(new NPoint(x, y));
shape.SetEndPoint(new NPoint(x + 350, y));
y += 30;
if (i == arrowheadShapes.Length / 2)
{
// Begin a second column of shapes
x += 400;
y = 0;
}
}
activePage.SizeToContent();
}
protected override void InitDiagram()
{
base.InitDiagram();
m_DrawingDocument.HistoryService.Pause();
try
{
NDrawing drawing = m_DrawingDocument.Content;
NPage activePage = drawing.ActivePage;
drawing.ScreenVisibility.ShowGrid = false;
// create all shapes
NConnectorShapeFactory factory = new NConnectorShapeFactory();
factory.DefaultSize = new NSize(120, 90);
int row = 0, col = 0;
double cellWidth = 300;
double cellHeight = 200;
for (int i = 0; i < factory.ShapeCount; i++, col++)
{
NShape shape = factory.CreateShape(i);
shape.Text = factory.GetShapeInfo(i).Name;
activePage.Items.Add(shape);
if (col >= 4)
{
row++;
col = 0;
}
NPoint beginPoint = new NPoint(50 + col * cellWidth, 50 + row * cellHeight);
NPoint endPoint = beginPoint + new NPoint(cellWidth - 50, cellHeight - 50);
shape.SetBeginPoint(beginPoint);
shape.SetEndPoint(endPoint);
}
// size page to content
activePage.Layout.ContentPadding = new NMargins(50);
activePage.SizeToContent();
}
finally
{
m_DrawingDocument.HistoryService.Resume();
}
}
protected override void InitDiagram()
{
base.InitDiagram();
// create all shapes
NBasicShapeFactory basicShapes = new NBasicShapeFactory();
NConnectorShapeFactory connectorShapes = new NConnectorShapeFactory();
// create the group
NGroup group = new NGroup();
// make some background for the group
NDrawRectangle drawRect = new NDrawRectangle(0, 0, 1, 1);
drawRect.Relative = true;
group.Geometry.Add(drawRect);
group.Geometry.Fill = new NColorFill(NColor.LightCoral);
group.SetBounds(new Nov.Graphics.NRectangle(50, 50, 230, 330));
// create a rectangle that is scaled and repositioned
NShape rect1 = basicShapes.CreateShape(ENBasicShape.Rectangle);
rect1.Text = "Scale and Reposition";
group.Shapes.Add(rect1);
rect1.ResizeInGroup = ENResizeInGroup.ScaleAndReposition;
rect1.SetBounds(new Nov.Graphics.NRectangle(10, 10, 100, 100));
// create a rectangle that is only repositioned
NShape rect2 = basicShapes.CreateShape(ENBasicShape.Rectangle);
rect2.Text = "Reposition Only";
group.Shapes.Add(rect2);
rect2.ResizeInGroup = ENResizeInGroup.RepositionOnly;
rect2.SetBounds(new Nov.Graphics.NRectangle(120, 120, 100, 100));
// create a 1D shape
NShape arrow = connectorShapes.CreateShape(ENConnectorShape.Single45DegreesArrow);
arrow.Text = "1D Shape";
group.Shapes.Add(arrow);
arrow.SetBeginPoint(new NPoint(10, 250));
arrow.SetEndPoint(new NPoint(220, 290));
// add the group
m_DrawingDocument.Content.ActivePage.Items.Add(group);
}
protected override void InitDiagram()
{
base.InitDiagram();
const double XStep = 150;
const double YStep = 200;
m_DrawingDocument.HistoryService.Pause();
try
{
NDrawing drawing = m_DrawingDocument.Content;
NPage activePage = drawing.ActivePage;
// Hide grid and ports
drawing.ScreenVisibility.ShowGrid = false;
drawing.ScreenVisibility.ShowPorts = false;
// create all shapes
NDimensioningEngineeringShapeFactory factory = new NDimensioningEngineeringShapeFactory();
factory.DefaultSize = new NSize(90, 90);
double x = 0;
double y = 0;
for (int i = 0; i < factory.ShapeCount; i++)
{
NShape shape = factory.CreateShape(i);
shape.HorizontalPlacement = ENHorizontalPlacement.Center;
shape.VerticalPlacement = ENVerticalPlacement.Center;
shape.Tooltip = new NTooltip(factory.GetShapeInfo(i).Name);
activePage.Items.Add(shape);
if (shape.ShapeType == ENShapeType.Shape1D)
{
ENDimensioningEngineeringShapes shapeType = (ENDimensioningEngineeringShapes)i;
switch (shapeType)
{
case ENDimensioningEngineeringShapes.VerticalBaseline:
case ENDimensioningEngineeringShapes.Vertical:
case ENDimensioningEngineeringShapes.VerticalOutside:
case ENDimensioningEngineeringShapes.OrdinateVertical:
case ENDimensioningEngineeringShapes.OrdinateVerticalMultiple:
shape.SetBeginPoint(new NPoint(x + shape.Width, y + shape.Height));
shape.SetEndPoint(new NPoint(x + shape.Width, y));
break;
case ENDimensioningEngineeringShapes.OrdinateHorizontalMultiple:
case ENDimensioningEngineeringShapes.OrdinateHorizontal:
shape.SetBeginPoint(new NPoint(x, y));
shape.SetEndPoint(new NPoint(x + shape.Width, y));
break;
case ENDimensioningEngineeringShapes.Radius:
case ENDimensioningEngineeringShapes.RadiusOutside:
case ENDimensioningEngineeringShapes.ArcRadius:
case ENDimensioningEngineeringShapes.Diameter:
case ENDimensioningEngineeringShapes.DiameterOutside:
shape.SetBeginPoint(new NPoint(x, y + shape.Height / 2));
shape.SetEndPoint(new NPoint(x + shape.Width, y - shape.Height / 2));
break;
case ENDimensioningEngineeringShapes.AngleCenter:
case ENDimensioningEngineeringShapes.AngleEven:
case ENDimensioningEngineeringShapes.AngleOutside:
case ENDimensioningEngineeringShapes.AngleUneven:
shape.SetBeginPoint(new NPoint(x, y + shape.Width / 2));
shape.SetEndPoint(new NPoint(x + shape.Width, y + shape.Width / 2));
break;
default:
shape.SetBeginPoint(new NPoint(x, y));
shape.SetEndPoint(new NPoint(x + shape.Width, y + shape.Height));
break;
}
}
else
{
shape.SetBounds(x, y, shape.Width, shape.Height);
shape.LocPinY = 1;
}
x += XStep;
if (x > activePage.Width)
{
x = 0;
y += YStep;
}
}
// size page to content
activePage.Layout.ContentPadding = new NMargins(50);
activePage.SizeToContent();
}
finally
{
m_DrawingDocument.HistoryService.Resume();
}
}
protected override void InitDiagram()
{
base.InitDiagram();
m_DrawingDocument.HistoryService.Pause();
try
{
NDrawing drawing = m_DrawingDocument.Content;
NPage activePage = drawing.ActivePage;
// Hide grid and ports
drawing.ScreenVisibility.ShowGrid = false;
drawing.ScreenVisibility.ShowPorts = false;
// create all shapes
NBasicShapeFactory factory = new NBasicShapeFactory();
factory.DefaultSize = new NSize(120, 90);
int row = 0, col = 0;
double cellWidth = 240;
double cellHeight = 150;
for (int i = 0; i < factory.ShapeCount; i++, col++)
{
NShape shape = factory.CreateShape(i);
shape.HorizontalPlacement = ENHorizontalPlacement.Center;
shape.VerticalPlacement = ENVerticalPlacement.Center;
shape.Text = factory.GetShapeInfo(i).Name;
MoveTextBelowShape(shape);
if (i == (int)ENBasicShape.ThreeDBox)
{
shape.TextBlock.Padding = new NMargins(0, 15, 0, 0);
}
else if (i == (int)ENBasicShape.Concentric)
{
shape.TextBlock.Angle = NAngle.Zero;
}
activePage.Items.Add(shape);
if (col >= 4)
{
row++;
col = 0;
}
NPoint beginPoint = new NPoint(50 + col * cellWidth, 50 + row * cellHeight);
if (shape.ShapeType == ENShapeType.Shape1D)
{
NPoint endPoint = beginPoint + new NPoint(cellWidth - 50, cellHeight - 50);
if (i == (int)ENBasicShape.CenterDragCircle)
{
beginPoint.Translate(cellWidth / 3, cellHeight / 3);
endPoint.Translate(-cellWidth / 3, -cellHeight / 3);
}
shape.SetBeginPoint(beginPoint);
shape.SetEndPoint(endPoint);
}
else
{
shape.SetBounds(beginPoint.X, beginPoint.Y, shape.Width, shape.Height);
}
}
// size page to content
activePage.Layout.ContentPadding = new NMargins(50);
activePage.SizeToContent();
}
finally
{
m_DrawingDocument.HistoryService.Resume();
}
}
protected override void InitDiagram()
{
base.InitDiagram();
const double XStep = 150;
const double YStep = 200;
m_DrawingDocument.HistoryService.Pause();
try
{
NDrawing drawing = m_DrawingDocument.Content;
NPage activePage = drawing.ActivePage;
// Hide grid and ports
drawing.ScreenVisibility.ShowGrid = false;
drawing.ScreenVisibility.ShowPorts = false;
// create all shapes
NDrawingToolShapeFactory factory = new NDrawingToolShapeFactory();
factory.DefaultSize = new NSize(90, 90);
double x = 0;
double y = 0;
for (int i = 0; i < factory.ShapeCount; i++)
{
NShape shape = factory.CreateShape(i);
shape.HorizontalPlacement = ENHorizontalPlacement.Center;
shape.VerticalPlacement = ENVerticalPlacement.Center;
shape.Tooltip = new NTooltip(factory.GetShapeInfo(i).Name);
if (i != (int)ENDrawingToolShapes.SectorNumeric &&
i != (int)ENDrawingToolShapes.ArcNumeric &&
i != (int)ENDrawingToolShapes.RightTriangle)
{
shape.Text = factory.GetShapeInfo(i).Name;
MoveTextBelowShape(shape);
}
activePage.Items.Add(shape);
if (shape.ShapeType == ENShapeType.Shape1D)
{
if (i == (int)ENDrawingToolShapes.CircleRadius)
{
shape.SetBeginPoint(new NPoint(x + shape.Width / 2, y));
}
else
{
shape.SetBeginPoint(new NPoint(x, y));
}
double width = shape.Width;
if (i == (int)ENDrawingToolShapes.MultigonEdge)
{
width = 90;
}
else if (i == (int)ENDrawingToolShapes.MultigonCenter)
{
width = 30;
}
shape.SetEndPoint(new NPoint(x + width, y + shape.Height));
}
else
{
shape.SetBounds(x, y, shape.Width, shape.Height);
shape.LocPinY = 1;
}
x += XStep;
if (x > activePage.Width)
{
x = 0;
y += YStep;
}
}
// size page to content
activePage.Layout.ContentPadding = new NMargins(50);
activePage.SizeToContent();
}
finally
{
m_DrawingDocument.HistoryService.Resume();
}
}
protected override void InitDiagram()
{
base.InitDiagram();
m_DrawingDocument.HistoryService.Pause();
try
{
NDrawing drawing = m_DrawingDocument.Content;
NPage activePage = drawing.ActivePage;
// Hide grid and ports
drawing.ScreenVisibility.ShowGrid = false;
drawing.ScreenVisibility.ShowPorts = false;
// Create all shapes
NGenogramShapeFactory factory = new NGenogramShapeFactory();
int row = 0, col = 0;
double cellWidth = 240;
double cellHeight = 150;
for (int i = 0; i < factory.ShapeCount; i++, col++)
{
NShape shape = factory.CreateShape(i);
shape.HorizontalPlacement = ENHorizontalPlacement.Center;
shape.VerticalPlacement = ENVerticalPlacement.Center;
NTextBlock textBlock = shape.GetFirstDescendant <NTextBlock>();
if (textBlock == null ||
i == (int)ENGenogramShape.Male ||
i == (int)ENGenogramShape.Female ||
i == (int)ENGenogramShape.Pet ||
i == (int)ENGenogramShape.UnknownGender)
{
textBlock = (NTextBlock)shape.TextBlock;
}
textBlock.Text = factory.GetShapeInfo(i).Name;
activePage.Items.Add(shape);
if (col >= 4)
{
row++;
col = 0;
}
NPoint beginPoint = new NPoint(50 + col * cellWidth, 50 + row * cellHeight);
if (shape.ShapeType == ENShapeType.Shape1D)
{
NPoint endPoint = beginPoint + new NPoint(cellWidth - 50, cellHeight - 50);
shape.SetBeginPoint(beginPoint);
shape.SetEndPoint(endPoint);
}
else
{
textBlock.SetFx(NTextBlock.PinYProperty, "$Parent.Height + Height + 10");
textBlock.ResizeMode = ENTextBlockResizeMode.TextSize;
shape.SetBounds(beginPoint.X, beginPoint.Y, shape.Width, shape.Height);
}
}
// size page to content
activePage.Layout.ContentPadding = new NMargins(50);
activePage.SizeToContent();
}
finally
{
m_DrawingDocument.HistoryService.Resume();
}
}