/// <summary>
/// Wait for the DUT measured voltage to drop at or below threshold specified.
/// </summary>
/// <param name="MeasurementType">Type of measurement to configure power supply for (Expect DC Voltage)</param>
/// <param name="Value">Measured voltage value required to be considered done.</param>
/// <param name="TimeOut">Timeout specified in milliseconds.</param>
/// <param name="DataOut">If requesting a measurement, measured value will be stored here.</param>
/// <param name="ErrorResponse">Error reponse of instrument. (+0,"No error") is a normal response with no error</param>
/// <returns></returns>
public bool MeasurementDischarge(CONFigureSubsystem_e MeasurementType, double Value, int TimeOut, out string DataOut, out string ErrorResponse)
{
DataOut = ErrorResponse = null;
double measurement =0;
MyProgressBar ProgressBar = new MyProgressBar();
Add(MeasurementType, MEASurementRange_e.DC100V, MEASurementResolution_e.DC100mV);
SendCommand(out DataOut, out ErrorResponse);
SetTimerInterval(TimeOut);
ProgressBar.SetProgressMax(522);
ProgressBar.SetLabelText("UUT Discharge Progress");
ProgressBar.UpdateProgress(519);
ProgressBar.Show();
ProgressBar.Update();
while (bTimeoutFlag != true)
{
Add(RootCommands_e.Read);
SendCommand(out DataOut, out ErrorResponse);
measurement = Convert.ToDouble(DataOut);
ProgressBar.UpdateProgress(Convert.ToInt16(measurement * 100));
ProgressBar.SetLabelText("UUT Discharge Progress, Voltage: " + String.Format("{0:0.00} VDC", measurement));
if (measurement < Value) break;
myWaitHandle.WaitOne(30);
}
ProgressBar.Close();
tmr1.Stop();
if (bTimeoutFlag == true)
{
//Timed out
return false;
}
else
{
//Success
return true;
}
}
/// <summary>
/// Waits for the DUT measured voltage to reach the threshold specified. Uses a progress bar for visual display.
/// </summary>
/// <param name="MeasurementType">Type of measurement to configure power supply for (Expect DC Voltage)</param>
/// <param name="Value">Measured voltage value required to be considered done.</param>
/// <param name="TimeOut">Timeout specified in milliseconds.</param>
/// <param name="DataOut">If requesting a measurement, measured value will be stored here.</param>
/// <param name="ErrorResponse">Error reponse of instrument. (+0,"No error") is a normal response with no error</param>
/// <returns></returns>
public bool MeasurementCharge(CONFigureSubsystem_e MeasurementType, double Value, int TimeOut, out string DataOut, out string ErrorResponse)
{
DataOut = ErrorResponse = null;
double PreviousMeasurement = 0;
MyProgressBar ProgressBar = new MyProgressBar();
bool ProgressFlag = false;
Add(MeasurementType, MEASurementRange_e.DC10V, MEASurementResolution_e.DC100mV);
SendCommand(out DataOut, out ErrorResponse);
SetTimerInterval(TimeOut);
ProgressBar.SetProgressMax(522);
ProgressBar.SetLabelText("UUT Charging Progress");
ProgressBar.Show();
double measurement = 0;
ProgressBar.Update();
while (bTimeoutFlag != true)
{
Add(RootCommands_e.Read);
SendCommand(out DataOut, out ErrorResponse);
measurement = Convert.ToDouble(DataOut);
ProgressBar.UpdateProgress(Convert.ToInt16(measurement * 100));
ProgressBar.SetLabelText("UUT Charging Progress, Voltage: " + String.Format("{0:0.00} VDC",measurement));
if (measurement > Value) break;
if (measurement > 4.5) ProgressFlag = true;
if (ProgressFlag == false)
{
if (measurement <= (PreviousMeasurement - 0.1))
{
ProgressBar.Close();
ErrorResponse = "PFM Circuit not charging, Current Measurement: " + measurement.ToString() + " Previous measurement: " + PreviousMeasurement.ToString() ;
return false;
}
}
PreviousMeasurement = measurement;
myWaitHandle.WaitOne(50);
}
tmr1.Stop();
ProgressBar.Close();
if (bTimeoutFlag == true)
{
//Timed out
ErrorResponse = "Timed Out, PFM Voltage measures: " + measurement.ToString();
return false;
}
else
{
//Success
return true;
}
}