public void RequestWithCallbackReturnsError()
{
//arrange
var fixture = new Fixture();
var client = new HttpClient();
//act
var multiGeocodeContainer = new MultipleGeocodeContainerArgs
{
Addresses = fixture.CreateMany <AddressWithId>(8).ToList()
};
var response =
client.PostAsJsonAsync(
"http://webapi/api/v1/Geocode/multiple?apiKey=AGRC-Explorer&callback=cb",
multiGeocodeContainer).Result;
Debug.Print(response.Content.ReadAsStringAsync().Result);
//assert
var resultContainer = response.Content.ReadAsAsync <ResultContainer <MultipleGeocodeContainerArgs> >().Result;
Assert.That(response.StatusCode == HttpStatusCode.OK);
Assert.That(resultContainer.Message.Contains("does not work"));
Assert.That(resultContainer.Status, Is.EqualTo(400));
}
public void RequestTruncatesReponseToMaxAllowedAddresses()
{
//arrange
var fixture = new Fixture();
var client = new HttpClient();
//act
var multiGeocodeContainer = new MultipleGeocodeContainerArgs
{
Addresses = fixture.Build <AddressWithId>().CreateMany(110).ToList()
};
var response =
client.PostAsJsonAsync("http://webapi/api/v1/Geocode/multiple?apiKey=AGRC-Explorer",
multiGeocodeContainer).Result;
Debug.Print(response.Content.ReadAsStringAsync().Result);
//assert
var resultContainer = response.Content.ReadAsAsync <ResultContainer <MultipleGeocodeContainerArgs> >().Result;
Assert.That(response.StatusCode == HttpStatusCode.OK);
Assert.That(resultContainer.Status, Is.EqualTo((int)HttpStatusCode.OK), "api key");
Assert.That(resultContainer.Result.Addresses.Count, Is.EqualTo(100), "maxed out");
Assert.That(resultContainer.Result.Addresses.Count(x => x.Id > 100), Is.EqualTo(0), "uses first set of id's");
}
public void RequestSkipsIdsThatAreNotUnique()
{
//arrange
var fixture = new Fixture();
var client = new HttpClient();
var multiGeocodeContainer = new MultipleGeocodeContainerArgs
{
Addresses = fixture.Build <AddressWithId>().With(x => x.Id, 1).CreateMany(2).ToList()
};
fixture.AddManyTo(multiGeocodeContainer.Addresses, 8);
Assert.That(multiGeocodeContainer.Addresses.Count, Is.EqualTo(10), "test data");
Assert.That(multiGeocodeContainer.Addresses.Count(x => x.Id == 1), Is.EqualTo(3),
"test data has right amount of duplicates");
//act
var response =
client.PostAsJsonAsync("http://webapi/api/v1/Geocode/multiple?apiKey=AGRC-Explorer",
multiGeocodeContainer).Result;
Debug.Print(response.Content.ReadAsStringAsync().Result);
//assert
var resultContainer = response.Content.ReadAsAsync <ResultContainer <MultipleGeocodeContainerArgs> >().Result;
Assert.That(response.StatusCode == HttpStatusCode.OK);
Assert.That(resultContainer.Status, Is.EqualTo((int)HttpStatusCode.OK), "api key");
Assert.That(resultContainer.Result.Addresses.Count, Is.EqualTo(8), "trim duplicate id's");
Assert.That(resultContainer.Result.Addresses.Count(x => x.Id > 100), Is.EqualTo(0), "uses first set of id's");
}
public void RequestReturnsSameNumberOfResultsBelowMaxAllowed()
{
//arrange
var fixture = new Fixture();
var client = new HttpClient();
//act
var multiGeocodeContainer = new MultipleGeocodeContainerArgs
{
Addresses = fixture.CreateMany <AddressWithId>(8).ToList()
};
var response =
client.PostAsJsonAsync("http://webapi/api/v1/Geocode/multiple?apiKey=AGRC-Explorer",
multiGeocodeContainer).Result;
Debug.Print(response.Content.ReadAsStringAsync().Result);
//assert
var resultContainer = response.Content.ReadAsAsync <ResultContainer <MultipleGeocodeContainerArgs> >().Result;
Assert.That(response.StatusCode == HttpStatusCode.OK);
Assert.That(resultContainer.Status, Is.EqualTo((int)HttpStatusCode.OK), "api key");
Assert.That(resultContainer.Result.Addresses.Count, Is.EqualTo(multiGeocodeContainer.Addresses.Count),
"same number as passed in");
}
public void GetSerializedJson()
{
//act
var multiGeocodeContainer = new MultipleGeocodeContainerArgs
{
Addresses = new List <AddressWithId>
{
new AddressWithId
{
Id = 1,
Street = "160 w main st",
Zone = "84652",
},
new AddressWithId
{
Id = 2,
Street = "80 w 100 s",
Zone = "84754",
},
new AddressWithId
{
Id = 3,
Zone = "84754",
Street = "83 W 100 S"
},
new AddressWithId
{
Id = 4,
Zone = "84754",
Street = "64 S Main St"
},
new AddressWithId
{
Id = 5,
Zone = "84620",
Street = "360 S Main St"
},
new AddressWithId
{
Id = 6,
Zone = "84104",
Street = "1 state office building"
}
}
};
var serializer = JsonConvert.SerializeObject(multiGeocodeContainer,
new JsonSerializerSettings());
Debug.Print(serializer);
}
public void MultipleAddressGetGeocodedAndIdsMatch()
{
//arrange
var client = new HttpClient();
//act
var multiGeocodeContainer = new MultipleGeocodeContainerArgs
{
Addresses = new List <AddressWithId>
{
new TestAddress
{
Id = 1,
Street = "160 w main st",
Zone = "84652",
KnownScore = 100,
KnownLocation = new Location
{
X = 424888.4,
Y = 4317812.22
}
},
new TestAddress
{
Id = 2,
Street = "80 w 100 s",
Zone = "84754",
KnownScore = 100,
KnownLocation = new Location
{
X = 404232.41,
Y = 4284199.87
}
},
new TestAddress
{
Id = 3,
Zone = "84754",
KnownLocation = new Location
{
X = 404244.06,
Y = 4284146.85
},
KnownScore = 100,
Street = "83 W 100 S"
},
new TestAddress
{
Id = 4,
Zone = "84754",
KnownLocation = new Location
{
X = 404410.09,
Y = 4284257.9
},
KnownScore = 100,
Street = "64 S Main St"
},
new TestAddress
{
Id = 5,
Zone = "84620",
KnownLocation = new Location
{
X = 418702.33,
Y = 4307790.93
},
KnownScore = 100,
Street = "360 S Main St"
},
new TestAddress
{
Id = 6,
Zone = "84104",
Street = "1 state office building",
KnownScore = 0
}
}
};
var stopwatch = new Stopwatch();
stopwatch.Start();
var response =
client.PostAsJsonAsync("http://webapi/api/v1/Geocode/multiple?apiKey=AGRC-Explorer",
multiGeocodeContainer).Result;
stopwatch.Stop();
Debug.Print(response.Content.ReadAsStringAsync().Result);
Debug.Print(stopwatch.ElapsedMilliseconds.ToString(CultureInfo.InvariantCulture));
//assert
var resultContainer =
response.Content.ReadAsAsync <ResultContainer <MultipleGeocdeAddressResultContainer> >().Result;
Assert.That(response.StatusCode == HttpStatusCode.OK);
Assert.That(resultContainer.Status, Is.EqualTo((int)HttpStatusCode.OK), "api key");
Assert.That(resultContainer.Result.Addresses.Count, Is.EqualTo(multiGeocodeContainer.Addresses.Count),
"counts sbould be equal");
var first = multiGeocodeContainer.Addresses.First(x => x.Id == 1);
Assert.That(resultContainer.Result.Addresses.First(x => x.Id == 1).InputAddress,
Is.EqualTo(first.Street + ", " + first.Zone), "streets are the same?");
}
public HttpResponseMessage Multiple(MultipleGeocodeContainerArgs addresseses, [FromUri] GeocodeOptions options)
{
var log = Log.ForContext <GeocodeController>();
log.Warning("geocode(multiple): options {@options}", options);
var notifications = "";
#region validation
if (addresseses == null)
{
return(Request.CreateResponse(HttpStatusCode.BadRequest,
new ResultContainer <MultipleGeocdeAddressResultContainer>
{
Status = (int)HttpStatusCode.BadRequest,
Message =
"Could not deserialize json. Please validate json to make sure it is in correct format. Try http://jsonlint.com"
})
.AddCache()
.AddTypeHeader(typeof(ResultContainer <MultipleGeocdeAddressResultContainer>)));
}
if (!addresseses.Addresses.Any())
{
return(Request.CreateResponse(HttpStatusCode.BadRequest,
new ResultContainer <MultipleGeocdeAddressResultContainer>
{
Status = (int)HttpStatusCode.BadRequest,
Message =
"No addresses to geocode. Please validate json to make sure it is in correct format. Try http://jsonlint.com"
})
.AddCache()
.AddTypeHeader(typeof(ResultContainer <MultipleGeocdeAddressResultContainer>)));
}
if (addresseses.Addresses.Count > MaxAddresses)
{
notifications = string.Format("Input {0}/{1} - Only processed {1}. ", addresseses.Addresses.Count,
MaxAddresses);
addresseses.Addresses = addresseses.Addresses.OrderBy(x => x.Id).Take(MaxAddresses).ToList();
}
var duplicateIds = addresseses.Addresses.GroupBy(x => x.Id)
.Where(x => x.Count() > 1)
.Select(x => x.Key)
.ToList();
if (duplicateIds.Count > 0)
{
notifications +=
string.Format("Found duplicate id's in list for ({0}). These addresses will not be geocoded.",
string.Join(", ", duplicateIds));
}
#endregion
var batchAddressResults = new Dictionary <int, GeocodeAddressResult>();
foreach (var address in addresseses.Addresses)
{
if (duplicateIds.Contains(address.Id))
{
continue;
}
batchAddressResults.Add(address.Id,
CommandExecutor.ExecuteCommand(new OrchesrateeGeocodeCommand(address.Street,
address.Zone,
options)));
}
var result = new MultipleGeocdeAddressResultContainer
{
Addresses = batchAddressResults.Select(MultipleGeocodeAddressResult.MapResult).ToList()
};
duplicateIds.ForEach(x => result.Addresses.Add(new MultipleGeocodeAddressResult
{
Id = x,
Score = -2,
ErrorMessage = "Duplicate Id; Skipping."
}));
HttpResponseMessage response;
try
{
log.Warning("success(multiple): success count {count}, average score {score}", result.Addresses.Count(), result.Addresses.Select(x => x.Score).Distinct());
response = Request.CreateResponse(HttpStatusCode.OK,
new ResultContainer
<MultipleGeocdeAddressResultContainer>
{
Status = (int)HttpStatusCode.OK,
Message = notifications,
Result = result
})
.AddCache()
.AddTypeHeader(typeof(ResultContainer <MultipleGeocdeAddressResultContainer>));
}
catch (InvalidOperationException ex)
{
log.Fatal(ex, "geocode(multiple): invalid operation jsonp?");
response = new HttpResponseMessage(HttpStatusCode.BadGateway)
{
Content = new ObjectContent(typeof(ResultContainer), new ResultContainer
{
Message = "JSONP does not work with POST requests.",
Status = 400
}, new JsonMediaTypeFormatter())
};
}
return(response);
}