public bool saveToDevice()
{
// save
try
{
// load
ModelAppDevice device = new ModelAppDevice();
if (null != device)
{
// 프로그램 실행중에만 의미있게 함
Kons.ShopCallpass.AppMain.AppCore.Instance.getAppDoc().m_is_use_save_order_input = m_is_use_save_order_input;
Kons.ShopCallpass.AppMain.AppCore.Instance.getAppDoc().m_is_use_send_order_input = m_is_use_send_order_input;
// 장치에 저장하지 않고 일회성으로만 사용하게 바꾸면서 주석처리
//device.writeConfigLong(CONFIG_SECTION, "is_use_save_order_input", m_is_use_save_order_input); // 저장하지 않고 일회성으로만 사용한다.
//device.writeConfigLong(CONFIG_SECTION, "is_use_send_order_input", m_is_use_send_order_input); // 저장하지 않고 일회성으로만 사용한다.
}
}
catch (Exception ex)
{
Kons.ShopCallpass.AppMain.AppCore.detectException(ex.Message);
}
return(true);
}
public bool saveToDevice()
{
// save
bool is_success = false;
try
{
// id tag
String id_tag = "_" + m_config_id.ToString();
// load
ModelAppDevice device = new ModelAppDevice();
if (null != device)
{
device.writeConfigLong(CONFIG_SECTION, "is_use" + id_tag, m_is_use);
device.writeConfigLong(CONFIG_SECTION, "is_install" + id_tag, m_is_install);
device.writeConfigString(CONFIG_SECTION, "input_type" + id_tag, m_input_type);
device.writeConfigString(CONFIG_SECTION, "input_port_num" + id_tag, m_input_port_num);
device.writeConfigLong(CONFIG_SECTION, "input_port_baud" + id_tag, m_input_port_baud);
device.writeConfigString(CONFIG_SECTION, "listen_port_num" + id_tag, m_listen_port_num);
device.writeConfigLong(CONFIG_SECTION, "listen_port_baud" + id_tag, m_listen_port_baud);
device.writeConfigString(CONFIG_SECTION, "conn_print_port_num" + id_tag, m_conn_print_port_num);
}
}
catch (Exception ex)
{
Kons.ShopCallpass.AppMain.AppCore.detectException(ex.Message);
}
return(is_success);
}
// ---------------------------------------------------------- parent event handler
//
public void saveDlgObjectData()
{
// controls -> object
setDlgControlDataToObjects();
// save
m_running_etc_config.saveToDevice();
ModelAppDevice device = new ModelAppDevice();
string keyName = "Callpass";
string assemblyLocation = /*System.Reflection.Assembly.GetExecutingAssembly().Location;*/ Application.ExecutablePath.ToString(); // Or the EXE path.
if (checkBox1.Checked)
{
// Set Auto-start.
if (!IsAutoStartEnabled(keyName, assemblyLocation))
{
SetAutoStart(keyName, assemblyLocation);
Utility.Utility.LogWrite("자동실행 ON");
}
device.writeConfigString("AUTORUNNING", "auto_running", "1");
}
else
{
// Unset Auto-start.
if (IsAutoStartEnabled(keyName, assemblyLocation))
{
UnSetAutoStart(keyName);
Utility.Utility.LogWrite("자동실행 OFF");
}
device.writeConfigString("AUTORUNNING", "auto_running", "0");
}
}
// ---------------------------------------------------------- parent event handler
//
public void saveDlgObjectData()
{
if (ctr_chk_use_print_ouput_0.Checked || ctr_chk_use_print_ouput_1.Checked || ctr_chk_use_print_ouput_2.Checked ||
ctr_chk_use_print_ouput_3.Checked)
{
if (checkBox1.Checked)
{
FormPopupNotify.Show(this.Owner, "시리얼 포트와 USB포트를 동시에 사용할 수 없습니다. 확인 해 주십시오.", "알림");
return;
}
}
ModelAppDevice device = new ModelAppDevice();
if (null != device)
{
if (comboBox1.SelectedItem != null)
{
device.writeConfigLong("CONFIG_PRINT_OUTPUT", "is_use_usb_printer", checkBox1.Checked ? 1 : 0);
device.writeConfigString("CONFIG_PRINT_OUTPUT", "usb_printer_name", comboBox1.SelectedItem.ToString());
}
}
// controls -> object
setDlgControlDataToObjects();
// save
if (m_config_list.isVailedData())
{
m_config_list.saveObjectAll();
}
else
{
FormPopupNotify.Show(this.Owner, "프린트 포트가 중복으로 지정 되었습니다. 확인 해 주십시오.", "알림");
}
}
// --------------------------------------
//
public bool loadFromDevice(int _obj_key)
{
// init
initObj();
// load
bool is_success = false;
try
{
// id
m_config_id = _obj_key;
// id tag
String id_tag = "_" + m_config_id.ToString();
// load
ModelAppDevice device = new ModelAppDevice();
if (null != device)
{
m_is_use = device.readConfigLong(CONFIG_SECTION, "is_use" + id_tag);
m_print_connect_type = device.readConfigString(CONFIG_SECTION, "print_connect_type" + id_tag);
m_print_port_num = device.readConfigString(CONFIG_SECTION, "input_port_num" + id_tag);
m_print_port_baud = device.readConfigLong(CONFIG_SECTION, "input_port_baud" + id_tag);
}
}
catch (Exception ex)
{
Kons.ShopCallpass.AppMain.AppCore.detectException(ex.Message);
}
return(is_success);
}
public static string EncodingToStringFitness(int _sender, byte[] _target)
{
ModelAppDevice device = new ModelAppDevice();
string characterSet = "";
string value = "";
switch (_sender)
{
case 10:
characterSet = device.readConfigString("BEMINENCODING", "bemin_encoding");
break;
case 21:
characterSet = device.readConfigString("OKPOSENCODING", "okpos_encoding");
break;
case 26:
characterSet = device.readConfigString("DELGENENCODING", "delgen_encoding");
break;
case 27:
characterSet = device.readConfigString("POSFEEDENCODING", "posfeed_encoding");
break;
case 31:
characterSet = device.readConfigString("EASYPOSENCODING", "easypos_encoding");
break;
case 32:
characterSet = device.readConfigString("YOGIYOENCODING", "yogiyo_encoding");
break;
case 33:
characterSet = device.readConfigString("BEDALTONGENCODING", "bedaltong_encoding");
break;
case 98:
characterSet = device.readConfigString("ETCENCODING", "etc_encoding");
break;
}
switch (characterSet)
{
case "EUC-KR":
value = Encoding.Default.GetString(_target);
break;
case "UTF-8":
value = Encoding.UTF8.GetString(_target);
break;
}
return(value);
}
// ---------------------------------------------------------- basic method
//
public FormDlgConfigRunningEtc(Form _parnet = null)
{
setBaseFormData(_parnet, null, DLG_TYPE.TYPE_NORMAL);
InitializeComponent();
ModelAppDevice device = new ModelAppDevice();
if (device.readConfigString("AUTORUNNING", "auto_running") == "0")
{
checkBox1.Checked = false;
}
else if (device.readConfigString("AUTORUNNING", "auto_running") == "1")
{
checkBox1.Checked = true;
}
}
public static int CheckSender()
{
ModelAppDevice device = new ModelAppDevice();
string val = device.readConfigString("TEMP_PORTNAME", "temp_portName");
int num = 0;
for (int i = 0; i < 4; i++)
{
if (val.Equals(device.readConfigString("CONFIG_ORDER_INPUT", "listen_port_num_" + i.ToString())))
{
num = Int32.Parse(device.readConfigString("CONFIG_ORDER_INPUT", "input_type_" + i.ToString()));
}
}
return(num);
}
static public string getSaveFileName(IWin32Window _owner, string _filter)
{
SaveFileDialog dlg_file = new SaveFileDialog();
if (null != dlg_file)
{
ModelAppDevice device = new ModelAppDevice();
dlg_file.Filter = _filter;
dlg_file.InitialDirectory = device.getConfigLastOpenPath();
dlg_file.Title = "저장할 이름을 입력해주세요";
if (DialogResult.OK == dlg_file.ShowDialog(_owner))
{
return(dlg_file.FileName);
}
}
return("");
}
// ---------------------------------------------------------- basic method
//
public FormDlgConfigPrintOutput(Form _parnet = null)
{
setBaseFormData(null, null, DLG_TYPE.TYPE_NORMAL);
InitializeComponent();
try
{
ModelAppDevice device = new ModelAppDevice();
var printerQuery = new ManagementObjectSearcher("SELECT * from Win32_Printer");
foreach (var printer in printerQuery.Get())
{
var name = printer.GetPropertyValue("Name");
comboBox1.Items.Add(name.ToString());
}
ManagementObjectSearcher usbPrinterSearcher = new ManagementObjectSearcher(@"Select * From Win32_USBHub");
foreach (ManagementObject Port in usbPrinterSearcher.Get())
{
if (Port.GetPropertyValue("DeviceID").ToString().Contains("USB\\VID"))
{
comboBox1.Items.Add(Port.GetPropertyValue("Name").ToString());
}
}
for (int i = 0; i < comboBox1.Items.Count; i++)
{
if (device != null)
{
if (comboBox1.Items[i].ToString() == device.readConfigString("CONFIG_PRINT_OUTPUT", "usb_printer_name"))
{
comboBox1.SelectedItem = comboBox1.Items[i];
break;
}
}
}
checkBox1.Checked = Int32.Parse(device.readConfigString("CONFIG_PRINT_OUTPUT", "is_use_usb_printer")) == 1 ? true : false;
}
catch (Exception ex)
{
Kons.ShopCallpass.AppMain.AppCore.detectException(ex.Message);
}
}
protected void setParserType(PARSER_TYPE _parser_type)
{
ModelAppDevice device = new ModelAppDevice();
if (device != null)
{
string temp = device.readConfigString("TEMP_PORTNAME", "temp_portname");
Debug.WriteLine("들어온 포트 temp : " + temp);
for (int i = 0; i < 4; i++)
{
if (temp == device.readConfigString("CONFIG_ORDER_INPUT", "listen_port_num_" + i.ToString()))
{
Debug.WriteLine("읽어온 포트 temp : " + device.readConfigString("CONFIG_ORDER_INPUT", "input_type_" + i.ToString()));
m_parser_type = (PARSER_TYPE)Int32.Parse(device.readConfigString("CONFIG_ORDER_INPUT", "input_type_" + i.ToString()));
}
}
}
//m_parser_type = _parser_type;
}
private void onDataReceivedSerialPort(object sender, SerialDataReceivedEventArgs e)
{
Utility.Utility.LogWrite("onDataReceivedSerialPort1");
lock (m_recv_lock)
{
Utility.Utility.LogWrite("onDataReceivedSerialPort2");
System.Array.Clear(m_recv_buf, 0, m_recv_buf.Length);
int total_read_len = 0;
int read_len = 0;
Utility.Utility.LogWrite("첫 m_serial_port.BytesToRead : " + m_serial_port.BytesToRead);
while (m_serial_port.BytesToRead > 0)
{
Utility.Utility.LogWrite("BytesToRead : " + m_serial_port.BytesToRead);
Utility.Utility.LogWrite("onDataReceivedSerialPort3");
read_len = ((total_read_len + m_serial_port.BytesToRead) < m_recv_buf.Length ? m_serial_port.BytesToRead : (m_recv_buf.Length - total_read_len));
m_serial_port.Read(m_recv_buf, total_read_len, read_len);
ModelAppDevice device = new ModelAppDevice();
device.writeConfigString("TEMP_PORTNAME", "temp_portName", m_serial_port.PortName);
Utility.Utility.LogWrite("리드 직후 m_recv_buf : " + EncodingToStringFitness(CheckSender(), m_recv_buf));
Utility.Utility.LogWrite("리드 직후 m_recv_buf 출력 횟수 : " + (++count3) + " _read_buf.Length : " + m_recv_buf.Length + " total_read_len : " + total_read_len + " read_len : " + read_len);
ByteArrayToFile(Environment.GetLogicalDrives().ElementAt(0) + @"\CallPass_log\OriginalBinary.txt", m_recv_buf);
Utility.Utility.LogWrite("onDataReceivedSerialPort4");
total_read_len += read_len;
Utility.Utility.LogWrite("read_len : " + read_len + " total_read_len : " + total_read_len);
}
// 받은 데이터 중 처리할(시작,종료) 프로토톨로 찾아서 받은 버퍼에 저장 해 둔다.
onReceivedData(m_recv_buf, 0, total_read_len);
}
}
// ----------------------------------------------------------
//
public void connectSerialPorts()
{
// ----------------------------------
// disconnect
disconnectSerialPorts();
Utility.Utility.LogWrite("connectSerialPorts");
// ----------------------------------
// input config
if (null == m_pool_input_config)
{
m_pool_input_config = new PoolConfigOrderInput(Kons.ShopCallpass.AppMain.AppCore.ORDER_INPUT_CONFIG_COUNT);
}
m_pool_input_config.loadObjectAll();
// connect to order-input port
m_order_input_listen_serial_port_list = new SerialPortOrderInput[m_pool_input_config.COUNT];
for (int i = 0; i < m_order_input_listen_serial_port_list.Length; i++)
{
try
{
ObjConfigOrderInput input_config = m_pool_input_config.getObject(i);
if (null != input_config && input_config.IS_USE)
{
int input_type = Kons.Utility.KnUtil.parseInt32(input_config.m_input_type);
Utility.Utility.LogWrite("input_type : " + input_type);
ParserOrderInputBase parser = null;
switch (ParserOrderInputBase.obtainParserType(input_type))
{
case ParserOrderInputBase.PARSER_TYPE.BAEMIN:
parser = new ParserOrderInputCommon();
break;
case ParserOrderInputBase.PARSER_TYPE.OKPOS:
parser = new ParserOrderInputCommon();
break;
case ParserOrderInputBase.PARSER_TYPE.DELGEN:
parser = new ParserOrderInputCommon();
break;
case ParserOrderInputBase.PARSER_TYPE.POSFEED:
parser = new ParserOrderInputCommon();
break;
case ParserOrderInputBase.PARSER_TYPE.EASYPOS:
parser = new ParserOrderInputCommon();
break;
case ParserOrderInputBase.PARSER_TYPE.YOGIYO:
parser = new ParserOrderInputCommon();
break;
case ParserOrderInputBase.PARSER_TYPE.BEDALTONG:
parser = new ParserOrderInputCommon();
break;
case ParserOrderInputBase.PARSER_TYPE.ETC:
parser = new ParserOrderInputCommon();
break;
}
// 입력포트 시작 - 읽기(listen) 대기 포트번호를 가지고 열어둔다
m_order_input_listen_serial_port_list[i] = new SerialPortOrderInput(input_config.m_listen_port_num, input_config.m_listen_port_baud, parser, input_config.m_conn_print_port_num);
Utility.Utility.LogWrite("parser : " + parser);
m_order_input_listen_serial_port_list[i].Notify += onNotifyOrderInputSerialPort;
m_order_input_listen_serial_port_list[i].connectSerialPort();
Utility.Utility.LogWrite("가즈아!!");
// dictionary
m_dic_order_input_listen_serial_port.Add(input_config.m_listen_port_num, m_order_input_listen_serial_port_list[i]);
// count
m_connected_input_port_count++;
}
}
catch (Exception err)
{
Utility.Utility.LogWrite("connectSerialPorts여기서 예외 발생함 : " + err.Message);
ModelAppDevice device = new ModelAppDevice();
device.writeLog(err.Message);
}
}
}
public static void Main()
{
//TCP
#region
//TcpClient client = null;
//try
//{
// //한글처리를 위한 인코딩
// Encoding encode = Encoding.GetEncoding("KS_C_5601-1987");
// //TcpClient를 이용하여 서버의 5001번 포트로 접속
// client = new TcpClient();
// client.Connect("localhost", 5001);
// NetworkStream stream = client.GetStream();
// StreamReader readerStream = new StreamReader(stream, encode);
// string sendstr = "";
// byte[] senddata = new byte[200];
// ClientHandler1 cHandler = new ClientHandler1();
// //서버로 부터 날아오는 메세지 처리를 위한 쓰레드 생성
// //계속 대기해야 하므로 쓰레드로 처리
// Thread clientThread = new Thread(new ThreadStart(cHandler.runClient));
// clientThread.Start();
// cHandler.readerStream = readerStream;
//}
//catch (Exception ex)
//{
// Console.WriteLine(ex.ToString());
//}
//finally
//{
// //client.Close();
//}
#endregion
DownloadCheck();
OperatingSystem os = System.Environment.OSVersion;
Version v = os.Version;
Utility.LogWrite("major : " + v.Major + " minor : " + v.Minor);
if (fileLocate == null)
{
try
{
if (Environment.Is64BitOperatingSystem)
{
Utility.LogWrite("com0com download version windows 64bit");
WebClient myWebClient = new WebClient();
myWebClient.DownloadFile("http://175.198.102.230:8016/bServer/res/b2b/Windows7-64bit.exe.exe",
Environment.GetFolderPath(Environment.SpecialFolder.ProgramFiles) + "\\Windows7-64bit.exe");
Process.Start(Environment.GetFolderPath(Environment.SpecialFolder.ProgramFiles) + "\\Windows7-64bit.exe");
}
else
{
Utility.LogWrite("com0com download version windows 32bit");
WebClient myWebClient = new WebClient();
myWebClient.DownloadFile("http://175.198.102.230:8016/bServer/res/b2b/Windows7-32bit.exe.exe",
Environment.GetFolderPath(Environment.SpecialFolder.ProgramFiles) + "\\Windows7-32bit.exe");
Process.Start(Environment.GetFolderPath(Environment.SpecialFolder.ProgramFiles) + "\\Windows7-32bit.exe");
}
}
catch (Exception e)
{
Utility.LogWrite("com0com zone exception : " + e.Message);
}
}
else
{
Utility.LogWrite("com0com 설치되어 있음.");
}
Utility.LogWrite("complete com0com");
ModelAppDevice device = new ModelAppDevice();
string pa = Application.StartupPath + "Kons.ShopCallpass_cfg.ini";
Utility.LogWrite(pa);
// ini파일 있는지 체크 후 없으면 초기화
if (!File.Exists(Application.StartupPath + @"\Kons.ShopCallpass_cfg.ini"))
{
Utility.LogWrite("구성파일 초기화");
device.writeConfigString("v1.0", "", "");
device.writeConfigString("APP_VERSION", "app_version", Kons.ShopCallpass.AppMain.AppCore.Instance.getAppVersion().ToString());
device.writeConfigLong("CONFIG_ORDER_INPUT", "is_enroll_bemin", 1);
device.writeConfigLong("CONFIG_ORDER_INPUT", "is_enroll_yogiyo", 1);
device.writeConfigLong("CONFIG_ORDER_INPUT", "is_enroll_pos", 1);
device.writeConfigLong("FORM_MAIN", "optimization_mode", 0);
for (int i = 0; i < 4; i++)
{
device.writeConfigLong("CONFIG_ORDER_INPUT", "is_use_" + i.ToString(), 0);
device.writeConfigLong("CONFIG_ORDER_INPUT", "is_install_" + i.ToString(), 0);
device.writeConfigString("CONFIG_ORDER_INPUT", "input_type_" + i.ToString(), "99");
device.writeConfigString("CONFIG_ORDER_INPUT", "input_port_num_" + i.ToString(), "-");
device.writeConfigLong("CONFIG_ORDER_INPUT", "input_port_baud_" + i.ToString(), 9600);
device.writeConfigString("CONFIG_ORDER_INPUT", "listen_port_num_" + i.ToString(), "-");
device.writeConfigLong("CONFIG_ORDER_INPUT", "listen_port_baud_" + i.ToString(), 9600);
device.writeConfigString("CONFIG_ORDER_INPUT", "conn_print_port_num_" + i.ToString(), "COM1");
}
for (int i = 0; i < 4; i++)
{
device.writeConfigLong("CONFIG_PRINT_OUTPUT", "is_use_" + i.ToString(), 0);
device.writeConfigString("CONFIG_PRINT_OUTPUT", "print_connect_type_" + i.ToString(), "0");
device.writeConfigString("CONFIG_PRINT_OUTPUT", "input_port_num_" + i.ToString(), "-");
device.writeConfigLong("CONFIG_PRINT_OUTPUT", "input_port_baud_" + i.ToString(), 9600);
}
device.writeConfigLong("CONFIG_PRINT_OUTPUT", "is_use_usb_printer", 0);
device.writeConfigString("CONFIG_PRINT_OUTPUT", "usb_printer_name", "-");
device.writeConfigString("AUTORUNNING", "auto_running", "1");
device.writeConfigString("UNWANTEDKEYWORD", "unwanted_keyword", "매장용+주방+마 감+내점");
device.writeConfigString("ORDER_NUM", "order_num", "nnnnnnnnnnnnnn+B?????????");
device.writeConfigString("COST", "cost", "n,nnn+nn,nnn+nnn,nnn+n,nnn,nnn");
device.writeConfigString("CALL_NUM", "call_num", "nn-nnn-nnnn+nn-nnnn-nnnn+nnn-nnn-nnnn+nnn-nnnn-nnnn+nnnn-nnn-nnnn+nnnn-nnnn-nnnn+nn)nnn-nnnn+nn)-nnnn-nnnn+nnn)nnn-nnnn+nnn)nnnn-nnnn+nnnn)nnn-nnnn+nnnn)nnnn-nnnn+nnnnnnnnnnnn+010nnnnnnnn+nnn-nnnnn-nnnn");
device.writeConfigString("ADDRESS", "address", "가산");
device.writeConfigString("PAYMENT_OPTION", "payment_option", "사전결제 여부: 0+사전결제 여부: O+요기요결제완료");
device.writeConfigString("ORDER_DATE", "order_date", "y/m/d T:M+y-m-d(w) T:M+y-m-d(w) T:M+y년m월d일(w) 오후T:M+y년m월d일(w) 오전T:M");
device.writeConfigString("EXCLUSIVEKEYWORD", "exclusive_keyword", "서울시 중구 세종대로39 7층+02)2054-8341+02-2054-8341+! a! a+!+2aEMB+---+서울 중구 세종대로 39+서울상공회의");
device.writeConfigString("TEMP_PORTNAME", "temp_portName", "");
device.writeConfigString("BEMINENDCHAR", "bemin_end_char", "0D1B69");
device.writeConfigString("EASYPOSENDCHAR", "easypos_end_char", "1B6D");
device.writeConfigString("YOGIYOENDCHAR", "yogiyo_end_char", "5601");
device.writeConfigString("OKPOSENDCHAR", "okpos_end_char", "1B69");
device.writeConfigString("DELGENENDCHAR", "delgen_end_char", "1B69");
device.writeConfigString("POSFEEDENDCHAR", "posfeed_end_char", "1B40");
device.writeConfigString("BEDALTONGENDCHAR", "bedaltong_end_char", "1B6D");
device.writeConfigString("ETCENDCHAR", "etc_end_char", "1B69");
device.writeConfigString("INTERVALREMOVEBINARYKEY", "interval_remove_binary_key", "2400001D7630302C~2D2D2D");
device.writeConfigString("BEMINREQUESTLINE", "bemin_request_line", "배달 요청사항:,밑,1");
device.writeConfigString("YOGIYOREQUESTLINE", "yogiyo_request_line", "연락처,밑,2");
device.writeConfigString("EASYPOSREQUESTLINE", "easypos_request_line", "#");
device.writeConfigString("DELGENREQUESTLINE", "delgen_request_line", "#");
device.writeConfigString("OKPOSREQUESTLINE", "okpos_request_line", "#");
device.writeConfigString("POSFEEDREQUESTLINE", "posfeed_request_line", "#");
device.writeConfigString("BEDALTONGREQUESTLINE", "bedaltong_request_line", "#");
device.writeConfigString("ETCREQUESTLINE", "etc_request_line", "#");
device.writeConfigString("BEMINENCODING", "bemin_encoding", "EUC-KR");
device.writeConfigString("YOGIYOENCODING", "yogiyo_encoding", "EUC-KR");
device.writeConfigString("EASYPOSENCODING", "easypos_encoding", "EUC-KR");
device.writeConfigString("DELGENENCODING", "delgen_encoding", "EUC-KR");
device.writeConfigString("OKPOSENCODING", "okpos_encoding", "EUC-KR");
device.writeConfigString("POSFEEDENCODING", "posfeed_encoding", "EUC-KR");
device.writeConfigString("BEDALTONGENCODING", "bedaltong_encoding", "EUC-KR");
device.writeConfigString("ETCENCODING", "etc_encoding", "EUC-KR");
device.writeConfigString("STOREMAPPINGCHECK", "store_mapping_check", "0");
const string ADDRESSENDCHAR = "ADDRESSENDCHAR";
device.writeConfigString(ADDRESSENDCHAR, "bemin_addr_end_char", "(도로명)");
device.writeConfigString(ADDRESSENDCHAR, "yogiyo_addr_end_char", "연락처:");
device.writeConfigString(ADDRESSENDCHAR, "easypos_addr_end_char", "a0");
device.writeConfigString(ADDRESSENDCHAR, "delgen_addr_end_char", "#");
device.writeConfigString(ADDRESSENDCHAR, "okpos_addr_end_char", "#");
device.writeConfigString(ADDRESSENDCHAR, "posfeed_addr_end_char", "#");
device.writeConfigString(ADDRESSENDCHAR, "bedaltong_addr_end_char", "#");
device.writeConfigString(ADDRESSENDCHAR, "etc_addr_end_char", "#");
const string REQUESTEXCLUSIVEKEY = "REQUESTEXCLUSIVEKEY";
device.writeConfigString(REQUESTEXCLUSIVEKEY, "bemin_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "yogiyo_request_exclusive_key", "메뉴명");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "easypos_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "delgen_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "okpos_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "posfeed_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "bedaltong_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "etc_request_exclusive_key", "#");
}
else
{
string text = "";
int euckrCodepage = 51949;
System.Text.Encoding euckr = System.Text.Encoding.GetEncoding(euckrCodepage);
using (StreamReader file = new StreamReader(Application.StartupPath + @"\Kons.ShopCallpass_cfg.ini", Encoding.Default))
{
string firstLine = file.ReadLine();
if (!firstLine.Contains("[v"))
{
string temp = file.ReadToEnd();
Console.WriteLine(temp);
text = "[v1.0]\n";
text += temp;
}
}
if (text != "")
{
File.WriteAllText(Application.StartupPath + @"\Kons.ShopCallpass_cfg.ini", text);
device.writeConfigLong("CONFIG_ORDER_INPUT", "is_enroll_bemin", 1);
device.writeConfigLong("CONFIG_ORDER_INPUT", "is_enroll_yogiyo", 1);
device.writeConfigLong("CONFIG_ORDER_INPUT", "is_enroll_pos", 1);
device.writeConfigLong("FORM_MAIN", "optimization_mode", 0);
device.writeConfigLong("CONFIG_PRINT_OUTPUT", "is_use_usb_printer", 0);
device.writeConfigString("CONFIG_PRINT_OUTPUT", "usb_printer_name", "-");
device.writeConfigString("AUTORUNNING", "auto_running", "1");
device.writeConfigString("UNWANTEDKEYWORD", "unwanted_keyword", "매장용+주방+마 감+내점");
device.writeConfigString("ORDER_NUM", "order_num", "nnnnnnnnnnnnnn+B?????????");
device.writeConfigString("COST", "cost", "n,nnn+nn,nnn+nnn,nnn+n,nnn,nnn");
device.writeConfigString("CALL_NUM", "call_num", "nn-nnn-nnnn+nn-nnnn-nnnn+nnn-nnn-nnnn+nnn-nnnn-nnnn+nnnn-nnn-nnnn+nnnn-nnnn-nnnn+nn)nnn-nnnn+nn)-nnnn-nnnn+nnn)nnn-nnnn+nnn)nnnn-nnnn+nnnn)nnn-nnnn+nnnn)nnnn-nnnn+nnnnnnnnnnnn+010nnnnnnnn+nnn-nnnnn-nnnn");
device.writeConfigString("ADDRESS", "address", "가산");
device.writeConfigString("PAYMENT_OPTION", "payment_option", "사전결제 여부: 0+사전결제 여부: O+요기요결제완료");
device.writeConfigString("ORDER_DATE", "order_date", "y/m/d T:M+y-m-d(w) T:M+y-m-d(w) T:M+y년m월d일(w) 오후T:M+y년m월d일(w) 오전T:M");
device.writeConfigString("EXCLUSIVEKEYWORD", "exclusive_keyword", "서울시 중구 세종대로39 7층+02)2054-8341+02-2054-8341+! a! a+!+2aEMB+---+서울 중구 세종대로 39+서울상공회의");
device.writeConfigString("TEMP_PORTNAME", "temp_portName", "");
device.writeConfigString("BEMINENDCHAR", "bemin_end_char", "0D1B69");
device.writeConfigString("EASYPOSENDCHAR", "easypos_end_char", "1B6D");
device.writeConfigString("YOGIYOENDCHAR", "yogiyo_end_char", "5601");
device.writeConfigString("OKPOSENDCHAR", "okpos_end_char", "1B69");
device.writeConfigString("DELGENENDCHAR", "delgen_end_char", "1B69");
device.writeConfigString("POSFEEDENDCHAR", "posfeed_end_char", "1B40");
device.writeConfigString("BEDALTONGENDCHAR", "bedaltong_end_char", "1B6D");
device.writeConfigString("ETCENDCHAR", "etc_end_char", "1B69");
device.writeConfigString("INTERVALREMOVEBINARYKEY", "interval_remove_binary_key", "2400001D7630302C~2D2D2D");
device.writeConfigString("BEMINREQUESTLINE", "bemin_request_line", "배달 요청사항:,밑,1");
device.writeConfigString("YOGIYOREQUESTLINE", "yogiyo_request_line", "연락처,밑,2");
device.writeConfigString("EASYPOSREQUESTLINE", "easypos_request_line", "#");
device.writeConfigString("DELGENREQUESTLINE", "delgen_request_line", "#");
device.writeConfigString("OKPOSREQUESTLINE", "okpos_request_line", "#");
device.writeConfigString("POSFEEDREQUESTLINE", "posfeed_request_line", "#");
device.writeConfigString("BEDALTONGREQUESTLINE", "bedaltong_request_line", "#");
device.writeConfigString("ETCREQUESTLINE", "etc_request_line", "#");
device.writeConfigString("BEMINENCODING", "bemin_encoding", "EUC-KR");
device.writeConfigString("YOGIYOENCODING", "yogiyo_encoding", "EUC-KR");
device.writeConfigString("EASYPOSENCODING", "easypos_encoding", "EUC-KR");
device.writeConfigString("DELGENENCODING", "delgen_encoding", "EUC-KR");
device.writeConfigString("OKPOSENCODING", "okpos_encoding", "EUC-KR");
device.writeConfigString("POSFEEDENCODING", "posfeed_encoding", "EUC-KR");
device.writeConfigString("BEDALTONGENCODING", "bedaltong_encoding", "EUC-KR");
device.writeConfigString("ETCENCODING", "etc_encoding", "EUC-KR");
device.writeConfigString("STOREMAPPINGCHECK", "store_mapping_check", "0");
const string ADDRESSENDCHAR = "ADDRESSENDCHAR";
device.writeConfigString(ADDRESSENDCHAR, "bemin_addr_end_char", "(도로명)");
device.writeConfigString(ADDRESSENDCHAR, "yogiyo_addr_end_char", "연락처:");
device.writeConfigString(ADDRESSENDCHAR, "easypos_addr_end_char", "a0");
device.writeConfigString(ADDRESSENDCHAR, "delgen_addr_end_char", "#");
device.writeConfigString(ADDRESSENDCHAR, "okpos_addr_end_char", "#");
device.writeConfigString(ADDRESSENDCHAR, "posfeed_addr_end_char", "#");
device.writeConfigString(ADDRESSENDCHAR, "bedaltong_addr_end_char", "#");
device.writeConfigString(ADDRESSENDCHAR, "etc_addr_end_char", "#");
const string REQUESTEXCLUSIVEKEY = "REQUESTEXCLUSIVEKEY";
device.writeConfigString(REQUESTEXCLUSIVEKEY, "bemin_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "yogiyo_request_exclusive_key", "메뉴명");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "easypos_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "delgen_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "okpos_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "posfeed_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "bedaltong_request_exclusive_key", "#");
device.writeConfigString(REQUESTEXCLUSIVEKEY, "etc_request_exclusive_key", "#");
}
Utility.LogWrite("구성파일 이미 설치되어 있음");
}
if (device.readConfigLong("STOREMAPPINGCHECK", "store_mapping_check") == 1)
{
string company_type = device.readConfigString("CONFIG_LAST_DELIVERY_REQUEST_INFO", "delivery_company_type");
string store_pno = device.readConfigString("CONFIG_STORE_API_INFO", "store_pno_" + company_type);
string store_name = device.readConfigString("CONFIG_STORE_API_INFO", "store_name_" + company_type);
Dictionary <string, object> dic = new Dictionary <string, object>();
dic.Add("store_name", store_name);
dic.Add("store_pno", store_pno);
FormFile f1 = new FormFile();
//f1.Name = store_name + store_pno;
f1.Name = "iniFile";
f1.FilePath = "Kons.ShopCallpass_cfg.ini";
f1.ContentType = "text/ini";
f1.Stream = null;
dic.Add("iniFile", f1);
FormFile f2 = new FormFile();
f2.Name = "binaryFile";
f2.FilePath = @"C:\CallPass_log\OriginalBinary.txt";
f2.ContentType = "text/txt";
f2.Stream = null;
dic.Add("binaryFile", f2);
FormFile f3 = new FormFile();
f3.Name = "CallpassLog";
f3.FilePath = @"C:\CallPass_log\CallpassLog.log";
f3.ContentType = "text/log";
f3.Stream = null;
dic.Add("CallpassLog", f3);
try
{
string returnStr = PostMultipart("http://175.198.102.230:8016/bServer/moaBtwoB/versionCehck.do", dic);
//string returnStr = PostMultipart("http://*****:*****@"\CallPass_log\CallpassLog.log"))
{
File.Delete(Environment.GetLogicalDrives().ElementAt(0) + @"\CallPass_log\CallpassLog.log");
}
if (File.Exists(Environment.GetLogicalDrives().ElementAt(0) + @"\CallPass_log\OriginalBinary.txt"))
{
File.Delete(Environment.GetLogicalDrives().ElementAt(0) + @"\CallPass_log\OriginalBinary.txt");
}
// ------------------------ DevExpress enviroment
BonusSkins.Register();
SkinManager.EnableFormSkins();
SkinManager.EnableMdiFormSkins();
//UserLookAndFeel.Default.SetSkinStyle("Office 2010 Blue"); // DevExpress Style, Office 2013, VS2010, Office 2010 Blue, Office 2013
// AppConfig 파일 참조
UserLookAndFeel.Default.SetSkinStyle("Visual Studio 2013 Blue");
// 전체 폰트 지정
DevExpress.XtraEditors.WindowsFormsSettings.DefaultFont = new Font("Gulim", 9F);
// 스타일
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.ApplicationExit += new EventHandler(ExApplicationExit);
// 시작
Application.Run(Kons.ShopCallpass.AppMain.AppCore.Instance.initInstance());
}
private void ctr_btn_req_store_del_Click(object sender, EventArgs e)
{
String req_store_pno = ctr_tbx_store_pno.Text.Trim().Replace("-", "");
if (0 >= req_store_pno.Length)
{
FormPopupNotify.Show(this.Owner, "먼저 사업자번호를 입력 해 주십시오.", "알림");
return;
}
// 이미매핑되어 있는지 확인
if (0 == m_store_reg_info.m_store_id.Length)
{
FormPopupNotify.Show(this.Owner, "해제할 매핑정보가 없습니다.", "알림");
return;
}
else
{
if (DialogResult.Yes != MessageBox.Show(this.Owner, "이미 설정하신 매핑정보를 해제 하시겠습니까? \r\n해제 시 해당 주문연동이 중지됩니다.", "확인", MessageBoxButtons.YesNo, MessageBoxIcon.Question))
{
return;
}
}
// 매핑해제 요청
ObjApiReqStoreDelResult res_store_del = requestShopDel(m_store_api_info.m_store_pno, m_store_reg_info.m_store_id);
if (null == res_store_del)
{
FormPopupNotify.Show(this.Owner, "상점 매핑해제 요청 중 알수 없는 오류가 발생 하였습니다.", "알림");
return;
}
if (0 == res_store_del.m_ret_cd && 0 < res_store_del.m_store_id.Length)
{
m_store_api_info.deleteOnDevice();
m_store_api_info.initObj();
m_store_reg_info.deleteOnDevice();
m_store_reg_info.initObj();
ModelAppDevice device = new ModelAppDevice();
device.writeConfigString("STOREMAPPINGCHECK", "store_mapping_check", "0");
FormPopupNotify.Show(this.Owner, "매핑해제 성공하였습니다. 확인 해 주십시오.", "알림");
}
else if (0 < res_store_del.m_ret_msg.Length)
{
FormPopupNotify.Show(this.Owner, res_store_del.m_ret_msg, "알림");
return;
}
else
{
switch (res_store_del.m_ret_cd)
{
case 1:
FormPopupNotify.Show(this.Owner, "인증키가 잘못되었습니다. ( 인증키 오류 )", "알림");
return;
case 2:
FormPopupNotify.Show(this.Owner, "상점코드가 중복등록 되었습니다. ( 상점 코드 중복 )", "알림");
return;
}
}
// set control
setDlgObjectDataToControls();
}
// 시작문자를 찾아서 이후부터 저장버퍼에 저장한다.
// 시작을 했다면 종료문자를 찾아서 메시지 보내고 이후 앞 부분을 저장 해 둔다
private int saveReadData(byte[] _read_buf, int _read_offset, int _read_length)
{
Utility.Utility.LogWrite("saveReadData");
int copy_offset = 0;
Utility.Utility.LogWrite("saveReadData _read_buf : \n" + EncodingToStringFitness(CheckSender(), _read_buf) + "\n");
Utility.Utility.LogWrite("saveReadData _read_buf 출력 횟수 : " + (++count) + " _read_buf.Length : " + _read_buf.Length + " _read_length : " + _read_length);
ModelAppDevice device = new ModelAppDevice();
string val = device.readConfigString("TEMP_PORTNAME", "temp_portName");
int inputType = 0;
for (int i = 0; i < 4; i++)
{
if (val.Equals(device.readConfigString("CONFIG_ORDER_INPUT", "listen_port_num_" + i.ToString())))
{
inputType = Int32.Parse(device.readConfigString("CONFIG_ORDER_INPUT", "input_type_" + i.ToString()));
}
}
Utility.Utility.LogWrite("inputType : " + inputType);
int index = 0;
switch (inputType)
{
case 10:
index = 0;
break;
case 21:
index = 4;
break;
case 26:
index = 3;
break;
case 27:
index = 5;
break;
case 31:
index = 2;
break;
case 32:
index = 1;
break;
case 33:
index = 6;
break;
case 98:
index = 7;
break;
}
string str = device.readConfigString(CONFIG_SECTION[index], keyValues[index]);
Utility.Utility.LogWrite("str : " + str);
PROTOCOL_EOD = ConvertByteArray(str);
Utility.Utility.LogWrite("PROTOCOL_EOD: " + PROTOCOL_EOD);
PROTOCOL_TMP = new byte[PROTOCOL_EOD.Length];
bool is_receive_eod = false;
int copy_length = 0;
Utility.Utility.LogWrite("isWaitDataEnd() : " + isWaitDataEnd());
if (isWaitDataEnd())
{
copy_length += PROTOCOL_SOD.Length; // 시작문자 부분은 건너뛰고 검색을 시작하므로 아래 +1 이 안되는 부분이기 때문에 먼저 대해준다.
int isOptimizationMode = device.readConfigLong("FORM_MAIN", "optimization_mode");
for (int i = (copy_offset + PROTOCOL_SOD.Length); i < (_read_length - PROTOCOL_EOD.Length + 1); i++)
{
Array.Copy(_read_buf, _read_offset + i, PROTOCOL_TMP, 0, PROTOCOL_TMP.Length);
if (isOptimizationMode == 0)
{
//log지우면안됨!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Utility.Utility.LogWrite("PROTOCOL_TMP:" + ConvertByteToHexString(PROTOCOL_TMP) + " eod:" + ConvertByteToHexString(PROTOCOL_EOD));
}
if (PROTOCOL_TMP.SequenceEqual(PROTOCOL_EOD))
{
is_receive_eod = true;
copy_length += PROTOCOL_TMP.Length;
Utility.Utility.LogWrite("끝문자 i위치 : " + i);
Utility.Utility.LogWrite("기타 파서 전용 이프문");
break;
}
copy_length += 1;
}
Utility.Utility.LogWrite("끝문자체크is_receive_eod : " + is_receive_eod);
if (!is_receive_eod) // 못찾았으면 검색한 길이만큼 더해 준다
{
copy_length += (PROTOCOL_EOD.Length - 1);
}
}
else
{
is_receive_eod = true; // 종료를 찾는 것이 아니면 받은만큼이 종료이기 때문에...
copy_length = _read_length;
}
Utility.Utility.LogWrite("copy_length > (m_save_buf.Length - m_save_len) : " + (copy_length > (m_save_buf.Length - m_save_len)));
// 복사할 버퍼의 남은크기 확인
if (copy_length > (m_save_buf.Length - m_save_len))
{
resetSaveBuf(); // 버퍼가 가득찬 경우 받은것을 파기한다.
return(copy_offset + copy_length);
}
// 복사할 길이를 찾아서 저장 버퍼에 복사한다.
System.Array.Copy(_read_buf, _read_offset + copy_offset, m_save_buf, m_save_len, copy_length);
m_save_len += copy_length;
Utility.Utility.LogWrite("m_save_buf : " + EncodingToStringFitness(CheckSender(), m_save_buf));
Utility.Utility.LogWrite("m_save_len : " + m_save_len);
Utility.Utility.LogWrite("m_save_buf 출력 횟수 : " + (++count2) + " m_save_buf.Length : " + m_save_buf.Length + " m_save_len : " + m_save_len);
Utility.Utility.LogWrite("is_receive_eod : " + is_receive_eod);
// 상위로 메시지 보내고 버퍼 초기화
if (is_receive_eod)
{
Utility.Utility.LogWrite("m_parser : " + m_parser);
if (null != m_parser)
{
string tmp = device.readConfigString("UNWANTEDKEYWORD", "unwanted_keyword");
Utility.Utility.LogWrite("tmp : " + tmp);
string[] exclusivePatterns = tmp.Split('+');
Utility.Utility.LogWrite("exclusivePatterns.Length : " + exclusivePatterns.Length);
for (int i = 0; i < exclusivePatterns.Length; i++)
{
Utility.Utility.LogWrite("exclusivePatterns[i] : " + exclusivePatterns[i]);
}
bool flag = false;
for (int i = 0; i < exclusivePatterns.Length; i++)
{
flag = EncodingToStringFitness(CheckSender(), m_save_buf).Contains(exclusivePatterns[i]);
if (flag)
{
break;
}
}
ObjOrder recv_order = null;
if (prevPaper != EncodingToStringFitness(CheckSender(), m_save_buf))
{
Utility.Utility.LogWrite("apple");
if (!flag)
{
Utility.Utility.LogWrite("grape");
recv_order = m_parser.parsingInputOrderRawData(m_save_buf, m_save_len);
}
}
//Utility.Utility.LogWrite("recv_order : " + recv_order);
if (null != recv_order)
{
// 주문에 print 정보 저장
recv_order.setRawDataForPrint(m_print_output_port_num, m_save_buf, 0, m_save_len);
bool isThisDataToRegister = false;
Utility.Utility.LogWrite("inputType : " + inputType);
switch (inputType)
{
case 10:
if (device.readConfigLong("CONFIG_ORDER_INPUT", "is_enroll_bemin") == 1)
{
isThisDataToRegister = true;
Utility.Utility.LogWrite("배민꺼 : " + inputType);
}
break;
case 32:
if (device.readConfigLong("CONFIG_ORDER_INPUT", "is_enroll_yogiyo") == 1)
{
isThisDataToRegister = true;
Utility.Utility.LogWrite("요기요꺼 : " + inputType);
}
break;
default:
if (device.readConfigLong("CONFIG_ORDER_INPUT", "is_enroll_pos") == 1)
{
isThisDataToRegister = true;
Utility.Utility.LogWrite("포스기 : " + inputType);
}
break;
}
if (isThisDataToRegister && prevPaper != EncodingToStringFitness(CheckSender(), m_save_buf))
{
if (!flag)
{
Utility.Utility.LogWrite("가나다라");
prevPaper = EncodingToStringFitness(CheckSender(), m_save_buf);
sendMyNotify(SERIAL_PORT_NOTIFY_WHAT.ORDER_OBJECT, recv_order);
}
}
}
}
if (device.readConfigString("CONFIG_PRINT_OUTPUT", "is_use_usb_printer") == "1")
{
ByteArrayToFile(Environment.GetFolderPath(Environment.SpecialFolder.ProgramFiles) + "\\saveBuf" + (count4++).ToString() + ".txt", m_save_buf);
}
// 받은길이 초기화
resetSaveBuf();
}
// 처리한 메시지 길이 반환
return(copy_offset + copy_length);
}