示例#1
0
        public LoopModel GetDevicesByLoop(LoopModel loop)
        {
            StringBuilder sbQuerySQL = new StringBuilder("select ID,Code ,Disable,LinkageGroup1,LinkageGroup2,AlertValue ,ForcastValue ,DelayValue ,BuildingNo ,ZoneNo ,FloorNo ,RoomNo ,Location ,LoopID,TypeCode from DeviceInfo8036 where LoopID=" + loop.ID);

            System.Data.DataTable dt = _databaseService.GetDataTableBySQL(sbQuerySQL);
            for (int i = 0; i < dt.Rows.Count; i++)
            {
                Model.DeviceInfo8036 model = new Model.DeviceInfo8036();
                model.ID            = Convert.ToInt16(dt.Rows[i]["id"]);
                model.Code          = dt.Rows[i]["Code"].ToString();
                model.Disable       = Convert.ToInt16(dt.Rows[i]["Disable"]);
                model.LinkageGroup1 = dt.Rows[i]["LinkageGroup1"].ToString();
                model.LinkageGroup2 = dt.Rows[i]["LinkageGroup2"].ToString();
                model.AlertValue    = Convert.ToSingle(dt.Rows[i]["AlertValue"]);
                model.ForcastValue  = Convert.ToSingle(dt.Rows[i]["ForcastValue"]);
                model.DelayValue    = new Nullable <short>(Convert.ToInt16(dt.Rows[i]["DelayValue"]));
                model.BuildingNo    = new Nullable <short>(Convert.ToInt16(dt.Rows[i]["BuildingNo"]));
                model.ZoneNo        = new Nullable <short>(Convert.ToInt16(dt.Rows[i]["ZoneNo"]));
                model.FloorNo       = new Nullable <short>(Convert.ToInt16(dt.Rows[i]["FloorNo"]));
                model.RoomNo        = new Nullable <short>(Convert.ToInt16(dt.Rows[i]["RoomNo"]));
                model.Location      = dt.Rows[i]["Location"].ToString();
                model.LoopID        = new Nullable <int>(Convert.ToInt32(dt.Rows[i]["LoopID"]));
                model.TypeCode      = Convert.ToInt16(dt.Rows[i]["TypeCode"]);
                model.Loop          = loop;
                model.LoopID        = loop.ID;
                loop.SetDevice <DeviceInfo8036>(model);
            }
            return(loop);
        }
示例#2
0
        public override void ReceiveDeviceInfo()
        {
            byte[] receivedData = CurrentPackage;
            IEqualityComparer <Model.DeviceInfo8036> c = new DeviceCompare();

            Model.DeviceInfo8036 deviceInfo = ParsePackageCC(receivedData);
            if (!DeviceInfoList.Contains(deviceInfo, c))
            {
                DeviceInfoList.Add(deviceInfo);
            }
        }
示例#3
0
        //public byte[] AssemblePackage66()
        //{
        //    return base.AssemblePackage66();
        //}
        //public byte[] AssemblePackageB9()
        //{
        //    return base.AssemblePackageB9();
        //}
        /// <summary>
        ///
        /// </summary>
        /// <param name="deviceInfo"></param>
        /// <returns></returns>
        //public   List<byte[]> AssemblePackageBB(List<Model.DeviceInfo8036 > deviceInfo)//各控制器不同 commented at 2017-04-05
        public byte[] AssemblePackageBB(Model.DeviceInfo8036 deviceInfo) //各控制器不同
        {
            //List<byte[]> lstSendData = new List<byte[]>();
            //foreach (Model.DeviceInfo8036 singleDevInfo in deviceInfo)
            //{
            Model.DeviceInfo8036 singleDevInfo = deviceInfo;
            byte[] sendData = new byte[43];
            sendData[0] = 0xAA;
            sendData[1] = 0x55;
            sendData[2] = 0xDA;
            sendData[3] = 0x00;                                                              //异或值校验
            sendData[4] = 0x00;                                                              //累加和校验
            //??
            sendData[5] = 0x25;                                                              //数据长度 ?? 暂定为01 ??
                sendData[6] = 0xBB;                                                          //发送器件命令
            //sendData[7] = Convert.ToByte(deviceInfo.Count); //器件总数
                sendData[7] = Convert.ToByte(0x2E);                                          //器件总数
                sendData[8] = Convert.ToByte(singleDevInfo.Loop.Controller.MachineNumber);   //控制器号
                sendData[9] = Convert.ToByte(singleDevInfo.Loop.SimpleCode);                 //回路号

            //sendData[10] = Convert.ToByte(singleDevInfo.Code.Substring(singleDevInfo.Loop.Controller.MachineNumber.Length + singleDevInfo.Loop.Code.Length, 3)); //地编号
            //回路的Code已经包含了机器号 2017-04-05
                sendData[10] = Convert.ToByte(singleDevInfo.Code.Substring(singleDevInfo.Loop.Code.Length, 3));    //地编号
                sendData[11] = Convert.ToByte(GetDevType(singleDevInfo.TypeCode) * 8 + singleDevInfo.Disable * 4); //器件状态(灵敏度、屏蔽);NT8001还有特性;根据这些值转换为“器件内部编码”
            //GetDevType(CInt(leixing)) * 8 + geli * 4
            sendData[12] = Convert.ToByte(singleDevInfo.TypeCode);                                                 //设备类型
            //           dsent(12) = Left(Trim(.Text), 3)    '  设备类型
            if (sendData[12] > 100)
            {
                sendData[12] = Convert.ToByte(Convert.ToInt16(sendData[12]) - 64);
            }

            sendData[13] = Convert.ToByte(singleDevInfo.LinkageGroup1.NullToZero()); //输出组1
            sendData[14] = Convert.ToByte(singleDevInfo.LinkageGroup2.NullToZero()); //输出组2
            sendData[15] = Convert.ToByte(singleDevInfo.DelayValue);                 //延时
            sendData[16] = 0x00;                                                     //防火分区,固定值00

            //17~33为安装地点
            //将地点信息逐字符取出,将每个字符转换为ANSI代码后,存入sendData数据中;
            //Convert.ToBase64String();
            int startIndex = 17;

            char[] charArrayLocation = singleDevInfo.Location.ToArray();
            //采用Base64编码传递数据
            System.Text.Encoding ascii = System.Text.Encoding.GetEncoding(54936);
            for (int j = 0; j < charArrayLocation.Length; j++)
            {
                //sendData[startIndex]=Convert.ToByte(Convert.ToBase64String(System.Text.Encoding.GetEncoding(54936).GetBytes(charArrayLocation[j].ToString())));

                Byte[] encodedBytes = ascii.GetBytes(charArrayLocation[j].ToString());
                if (encodedBytes.Length == 1)
                {
                    sendData[startIndex] = encodedBytes[0];
                    startIndex++;
                }
                else
                {
                    sendData[startIndex] = encodedBytes[0];
                    startIndex++;
                    sendData[startIndex] = encodedBytes[1];
                    startIndex++;
                }
            }
            //补足位数
            for (int j = startIndex; j < 34; j++)
            {
                sendData[j] = 0x00;
            }
                #region 地址转换参考代码
            //  sendData[17]=0x;

            //       n = 17

            //For j = 1 To lenc

            //    ascchina = Asc(Mid(sstrchina, j, 1))

            //    If ascchina >= 0 And ascchina < 128 Then

            //      dsent(n) = ascchina

            //    Else

            //      getasc (Mid(sstrchina, j, 1))

            //      dsent(n) = m4

            //      n = n + 1

            //      dsent(n) = m1

            //  End If

            //  n = n + 1

            //Next j


            //For nn = n To 33

            //  dsent(nn) = 0

            //Next nn
            #endregion
            sendData[34] = 0x00;    //固定值00
            //楼号
            if (singleDevInfo.BuildingNo == null)
            {
                sendData[35] = 0x00;
            }
            else
            {
                sendData[35] = Convert.ToByte(singleDevInfo.BuildingNo);
            }
            //区号
            if (singleDevInfo.ZoneNo == null)
            {
                sendData[36] = 0x00;
            }
            else
            {
                sendData[36] = Convert.ToByte(singleDevInfo.ZoneNo);
            }
            //层号
            if (singleDevInfo.FloorNo == null)
            {
                sendData[37] = 0x00;
            }
            else
            {
                sendData[37] = Convert.ToByte(singleDevInfo.FloorNo);
            }
            //房间号
            if (singleDevInfo.RoomNo == null)
            {
                sendData[38] = 0x00;
            }
            else
            {
                sendData[38] = Convert.ToByte(singleDevInfo.RoomNo);
            }
            float?alartValue   = singleDevInfo.AlertValue;
            float?forcastValue = singleDevInfo.ForcastValue;
            if (alartValue == null)
            {
                alartValue = 0;
            }
            if (forcastValue == null)
            {
                forcastValue = 0;
            }
            int sendData39 = (int)(alartValue / 256);
            int sendData40 = (int)(alartValue % 256);
            int sendData41 = (int)(forcastValue / 256);
            int sendData42 = (int)(forcastValue % 256);
            sendData[39] = Convert.ToByte(sendData39);
            sendData[40] = Convert.ToByte(sendData40);
            sendData[41] = Convert.ToByte(sendData41);
            sendData[42] = Convert.ToByte(sendData42);
            //int intSumCheck=0;
            //for (int j = 6; j < 43; j++)
            //{
            //    sendData[3] = Convert.ToByte(sendData[3] ^ sendData[j]);
            //    intSumCheck = intSumCheck + sendData[j];
            //}
            //sendData[4] = Convert.ToByte(intSumCheck % 256);
            byte[] checkValue = base.m_ProtocolDriver.CheckValue(sendData, 6, 43);
            sendData[3] = checkValue[0];
            sendData[4] = checkValue[1];
            //  lstSendData.Add(sendData);
            //}
            //return lstSendData;
            return(sendData);
        }