public void Clone()
{
MachineModel original = new MachineModel();
Storage storage = new Storage
{
Capacity = 12345678,
Free = 123456,
Mounted = true,
OpenFiles = 3467,
Speed = 200000
};
original.Storages.Add(storage);
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(1, original.Storages.Count);
Assert.AreEqual(original.Storages[0].Capacity, clone.Storages[0].Capacity);
Assert.AreEqual(original.Storages[0].Free, clone.Storages[0].Free);
Assert.AreEqual(original.Storages[0].Mounted, clone.Storages[0].Mounted);
Assert.AreEqual(original.Storages[0].OpenFiles, clone.Storages[0].OpenFiles);
Assert.AreEqual(original.Storages[0].Speed, clone.Storages[0].Speed);
Assert.AreNotSame(original.Storages[0].Capacity, clone.Storages[0].Capacity);
Assert.AreNotSame(original.Storages[0].Free, clone.Storages[0].Free);
Assert.AreNotSame(original.Storages[0].Mounted, clone.Storages[0].Mounted);
Assert.AreNotSame(original.Storages[0].OpenFiles, clone.Storages[0].OpenFiles);
Assert.AreNotSame(original.Storages[0].Speed, clone.Storages[0].Speed);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.Channels.SPI.RelativePositioning = true;
original.Channels.USB.Feedrate = 123F;
original.Channels.File.Feedrate = 565F;
original.Channels.CodeQueue.UsingInches = true;
original.Channels.HTTP.RelativeExtrusion = true;
original.Channels.Daemon.Feedrate = 45F;
original.Channels[DuetAPI.CodeChannel.Telnet].StackDepth = 5;
original.Channels.LCD.LineNumber = 45;
original.Channels.AUX.VolumetricExtrusion = true;
original.Channels.AutoPause.Compatibility = Compatibility.Marlin;
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.Channels.SPI.RelativePositioning, clone.Channels.SPI.RelativePositioning);
Assert.AreEqual(original.Channels.USB.Feedrate, clone.Channels.USB.Feedrate);
Assert.AreEqual(original.Channels.File.Feedrate, clone.Channels.File.Feedrate);
Assert.AreEqual(original.Channels.CodeQueue.UsingInches, clone.Channels.CodeQueue.UsingInches);
Assert.AreEqual(original.Channels.HTTP.RelativePositioning, clone.Channels.HTTP.RelativePositioning);
Assert.AreEqual(original.Channels.Daemon.Feedrate, clone.Channels.Daemon.Feedrate);
Assert.AreEqual(original.Channels.Telnet.StackDepth, clone.Channels.Telnet.StackDepth);
Assert.AreEqual(original.Channels.LCD.LineNumber, clone.Channels.LCD.LineNumber);
Assert.AreEqual(original.Channels.AUX.VolumetricExtrusion, clone.Channels.AUX.VolumetricExtrusion);
Assert.AreEqual(original.Channels.AutoPause.Compatibility, clone.Channels.AutoPause.Compatibility);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.UserSessions.Add(new UserSession {
AccessLevel = AccessLevel.ReadOnly, Id = 123, Origin = "192.168.1.123", OriginId = 34545, SessionType = SessionType.HTTP
});
original.UserSessions.Add(new UserSession {
AccessLevel = AccessLevel.ReadWrite, Id = 124, Origin = "console", OriginId = -1, SessionType = SessionType.Local
});
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.UserSessions.Count, clone.UserSessions.Count);
Assert.AreEqual(original.UserSessions[0].AccessLevel, clone.UserSessions[0].AccessLevel);
Assert.AreEqual(original.UserSessions[0].Id, clone.UserSessions[0].Id);
Assert.AreEqual(original.UserSessions[0].Origin, clone.UserSessions[0].Origin);
Assert.AreEqual(original.UserSessions[0].OriginId, clone.UserSessions[0].OriginId);
Assert.AreEqual(original.UserSessions[0].SessionType, clone.UserSessions[0].SessionType);
Assert.AreEqual(original.UserSessions[1].AccessLevel, clone.UserSessions[1].AccessLevel);
Assert.AreEqual(original.UserSessions[1].Id, clone.UserSessions[1].Id);
Assert.AreEqual(original.UserSessions[1].Origin, clone.UserSessions[1].Origin);
Assert.AreEqual(original.UserSessions[1].OriginId, clone.UserSessions[1].OriginId);
Assert.AreEqual(original.UserSessions[1].SessionType, clone.UserSessions[1].SessionType);
}
public void Clone()
{
MachineModel original = new MachineModel();
Tool tool = new Tool
{
Filament = "PET-G",
Name = "Mixing Tool",
Number = 3,
Spindle = 3
};
tool.Active.Add(200F);
tool.Active.Add(220F);
tool.Fans.Add(3);
tool.Heaters.Add(4);
tool.Heaters.Add(5);
tool.Mix.Add(0.4F);
tool.Mix.Add(0.6F);
tool.Offsets.Add(12F);
tool.Offsets.Add(34F);
tool.Offsets.Add(56F);
tool.Standby.Add(40F);
tool.Standby.Add(60F);
tool.Axes.Add(new int[] { 0 });
tool.Axes.Add(new int[] { 1 });
original.Tools.Add(tool);
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(1, original.Tools.Count);
Assert.AreEqual(original.Tools[0].Active, clone.Tools[0].Active);
Assert.AreEqual(original.Tools[0].Axes.Count, 2);
Assert.AreEqual(original.Tools[0].Axes[0], clone.Tools[0].Axes[0]);
Assert.AreEqual(original.Tools[0].Axes[1], clone.Tools[0].Axes[1]);
Assert.AreEqual(original.Tools[0].Fans, clone.Tools[0].Fans);
Assert.AreEqual(original.Tools[0].Filament, clone.Tools[0].Filament);
Assert.AreEqual(original.Tools[0].Heaters, clone.Tools[0].Heaters);
Assert.AreEqual(original.Tools[0].Mix, clone.Tools[0].Mix);
Assert.AreEqual(original.Tools[0].Name, clone.Tools[0].Name);
Assert.AreEqual(original.Tools[0].Number, clone.Tools[0].Number);
Assert.AreEqual(original.Tools[0].Offsets, clone.Tools[0].Offsets);
Assert.AreEqual(original.Tools[0].Spindle, clone.Tools[0].Spindle);
Assert.AreEqual(original.Tools[0].Standby, clone.Tools[0].Standby);
Assert.AreNotSame(original.Tools[0].Active, clone.Tools[0].Active);
Assert.AreNotSame(original.Tools[0].Axes, clone.Tools[0].Axes);
Assert.AreNotSame(original.Tools[0].Axes[0], clone.Tools[0].Axes[0]);
Assert.AreNotSame(original.Tools[0].Axes[1], clone.Tools[0].Axes[1]);
Assert.AreNotSame(original.Tools[0].Fans, clone.Tools[0].Fans);
Assert.AreNotSame(original.Tools[0].Filament, clone.Tools[0].Filament);
Assert.AreNotSame(original.Tools[0].Heaters, clone.Tools[0].Heaters);
Assert.AreNotSame(original.Tools[0].Mix, clone.Tools[0].Mix);
Assert.AreNotSame(original.Tools[0].Name, clone.Tools[0].Name);
Assert.AreNotSame(original.Tools[0].Number, clone.Tools[0].Number);
Assert.AreNotSame(original.Tools[0].Offsets, clone.Tools[0].Offsets);
Assert.AreNotSame(original.Tools[0].Spindle, clone.Tools[0].Spindle);
Assert.AreNotSame(original.Tools[0].Standby, clone.Tools[0].Standby);
}
public void Clone()
{
MachineModel original = new MachineModel();
Tool tool = new Tool
{
Active = new float[] { 200F, 220F },
Fans = new int[] { 3 },
Filament = "PET-G",
Heaters = new int[] { 4, 5 },
Mix = new float[] { 0.4F, 0.6F },
Name = "Mixing Tool",
Number = 3,
Offsets = new float[] { 12F, 34F, 56F },
Spindle = 3,
Standby = new float[] { 40F, 60F }
};
tool.Axes.Add(new int[] { 0 });
tool.Axes.Add(new int[] { 1 });
original.Tools.Add(tool);
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(1, original.Tools.Count);
Assert.AreEqual(original.Tools[0].Active, clone.Tools[0].Active);
Assert.AreEqual(original.Tools[0].Axes.Count, 2);
Assert.AreEqual(original.Tools[0].Axes[0], clone.Tools[0].Axes[0]);
Assert.AreEqual(original.Tools[0].Axes[1], clone.Tools[0].Axes[1]);
Assert.AreEqual(original.Tools[0].Fans, clone.Tools[0].Fans);
Assert.AreEqual(original.Tools[0].Filament, clone.Tools[0].Filament);
Assert.AreEqual(original.Tools[0].Heaters, clone.Tools[0].Heaters);
Assert.AreEqual(original.Tools[0].Mix, clone.Tools[0].Mix);
Assert.AreEqual(original.Tools[0].Name, clone.Tools[0].Name);
Assert.AreEqual(original.Tools[0].Number, clone.Tools[0].Number);
Assert.AreEqual(original.Tools[0].Offsets, clone.Tools[0].Offsets);
Assert.AreEqual(original.Tools[0].Spindle, clone.Tools[0].Spindle);
Assert.AreEqual(original.Tools[0].Standby, clone.Tools[0].Standby);
Assert.AreNotSame(original.Tools[0].Active, clone.Tools[0].Active);
Assert.AreNotSame(original.Tools[0].Axes, clone.Tools[0].Axes);
Assert.AreNotSame(original.Tools[0].Axes[0], clone.Tools[0].Axes[0]);
Assert.AreNotSame(original.Tools[0].Axes[1], clone.Tools[0].Axes[1]);
Assert.AreNotSame(original.Tools[0].Fans, clone.Tools[0].Fans);
Assert.AreNotSame(original.Tools[0].Filament, clone.Tools[0].Filament);
Assert.AreNotSame(original.Tools[0].Heaters, clone.Tools[0].Heaters);
Assert.AreNotSame(original.Tools[0].Mix, clone.Tools[0].Mix);
Assert.AreNotSame(original.Tools[0].Name, clone.Tools[0].Name);
Assert.AreNotSame(original.Tools[0].Number, clone.Tools[0].Number);
Assert.AreNotSame(original.Tools[0].Offsets, clone.Tools[0].Offsets);
Assert.AreNotSame(original.Tools[0].Spindle, clone.Tools[0].Spindle);
Assert.AreNotSame(original.Tools[0].Standby, clone.Tools[0].Standby);
}
public void Clone()
{
MachineModel original = new MachineModel();
Fan fan = new Fan
{
Value = 100,
Name = "Fan Name",
Rpm = 1234,
Inverted = true,
Frequency = 20000,
Min = 0.01F,
Max = 0.99F,
Blip = 0
};
fan.Thermostatic.Control = false;
fan.Thermostatic.Heaters.Add(1);
fan.Thermostatic.Heaters.Add(2);
fan.Thermostatic.Temperature = 79F;
fan.Pin = 23;
original.Fans.Add(fan);
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(1, original.Fans.Count);
Assert.AreEqual(original.Fans[0].Value, clone.Fans[0].Value);
Assert.AreEqual(original.Fans[0].Name, clone.Fans[0].Name);
Assert.AreEqual(original.Fans[0].Rpm, clone.Fans[0].Rpm);
Assert.AreEqual(original.Fans[0].Inverted, clone.Fans[0].Inverted);
Assert.AreEqual(original.Fans[0].Frequency, clone.Fans[0].Frequency);
Assert.AreEqual(original.Fans[0].Min, clone.Fans[0].Min);
Assert.AreEqual(original.Fans[0].Max, clone.Fans[0].Max);
Assert.AreEqual(original.Fans[0].Blip, clone.Fans[0].Blip);
Assert.AreEqual(original.Fans[0].Thermostatic.Control, clone.Fans[0].Thermostatic.Control);
Assert.AreEqual(original.Fans[0].Thermostatic.Heaters, clone.Fans[0].Thermostatic.Heaters);
Assert.AreEqual(original.Fans[0].Thermostatic.Temperature, clone.Fans[0].Thermostatic.Temperature);
Assert.AreEqual(original.Fans[0].Pin, clone.Fans[0].Pin);
Assert.AreNotSame(original.Fans[0].Value, clone.Fans[0].Value);
Assert.AreNotSame(original.Fans[0].Name, clone.Fans[0].Name);
Assert.AreNotSame(original.Fans[0].Rpm, clone.Fans[0].Rpm);
Assert.AreNotSame(original.Fans[0].Inverted, clone.Fans[0].Inverted);
Assert.AreNotSame(original.Fans[0].Frequency, clone.Fans[0].Frequency);
Assert.AreNotSame(original.Fans[0].Min, clone.Fans[0].Min);
Assert.AreNotSame(original.Fans[0].Max, clone.Fans[0].Max);
Assert.AreNotSame(original.Fans[0].Blip, clone.Fans[0].Blip);
Assert.AreNotSame(original.Fans[0].Thermostatic.Control, clone.Fans[0].Thermostatic.Control);
Assert.AreNotSame(original.Fans[0].Thermostatic.Heaters, clone.Fans[0].Thermostatic.Heaters);
Assert.AreNotSame(original.Fans[0].Thermostatic.Temperature, clone.Fans[0].Thermostatic.Temperature);
Assert.AreNotSame(original.Fans[0].Pin, clone.Fans[0].Pin);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.Messages.Add(new Message(MessageType.Warning, "Test 1 2 3"));
original.Messages.Add(new Message(MessageType.Error, "Err 3 2 1"));
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(2, original.Messages.Count);
Assert.AreEqual(original.Messages[0].Content, "Test 1 2 3");
Assert.AreEqual(original.Messages[0].Type, MessageType.Warning);
Assert.AreEqual(original.Messages[1].Content, "Err 3 2 1");
Assert.AreEqual(original.Messages[1].Type, MessageType.Error);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.Scanner.Progress = 12.34F;
original.Scanner.Status = ScannerStatus.PostProcessing;
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.Scanner.Progress, clone.Scanner.Progress);
Assert.AreEqual(original.Scanner.Status, clone.Scanner.Status);
Assert.AreNotSame(original.Scanner.Progress, clone.Scanner.Progress);
Assert.AreNotSame(original.Scanner.Status, clone.Scanner.Status);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.HttpEndpoints.Add(new HttpEndpoint {
EndpointType = HttpEndpointType.PATCH, Namespace = "my-demo", Path = "ep", UnixSocket = "/tmp/some.sock"
});
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.HttpEndpoints.Count, clone.HttpEndpoints.Count);
Assert.AreEqual(original.HttpEndpoints[0].EndpointType, clone.HttpEndpoints[0].EndpointType);
Assert.AreEqual(original.HttpEndpoints[0].Namespace, clone.HttpEndpoints[0].Namespace);
Assert.AreEqual(original.HttpEndpoints[0].Path, clone.HttpEndpoints[0].Path);
Assert.AreEqual(original.HttpEndpoints[0].UnixSocket, clone.HttpEndpoints[0].UnixSocket);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.UserVariables.Add(new UserVariable {
Name = "Variable 1", Value = "Value 1"
});
original.UserVariables.Add(new UserVariable {
Name = "Variable 2", Value = "Value 2"
});
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.UserVariables.Count, clone.UserVariables.Count);
Assert.AreEqual(original.UserVariables[0].Name, clone.UserVariables[0].Name);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.Directories.GCodes = "0:/gcodes/foo";
original.Directories.Macros = "0:/my macros";
original.Directories.System = "0:/sys/test";
original.Directories.WWW = "0:/www/test";
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.Directories.GCodes, clone.Directories.GCodes);
Assert.AreEqual(original.Directories.Macros, clone.Directories.Macros);
Assert.AreEqual(original.Directories.System, clone.Directories.System);
Assert.AreEqual(original.Directories.WWW, clone.Directories.WWW);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.MessageBox.AxisControls.Add(1);
original.MessageBox.AxisControls.Add(2);
original.MessageBox.Message = "Message";
original.MessageBox.Mode = MessageBoxMode.OkCancel;
original.MessageBox.Title = "Title";
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.MessageBox.AxisControls, clone.MessageBox.AxisControls);
Assert.AreEqual(original.MessageBox.Message, clone.MessageBox.Message);
Assert.AreEqual(original.MessageBox.Mode, clone.MessageBox.Mode);
Assert.AreEqual(original.MessageBox.Title, clone.MessageBox.Title);
}
public void Clone()
{
string modelPath = Path.Combine(Directory.GetCurrentDirectory(), "../../../Machine/JSON/model.json");
string jsonText = System.IO.File.ReadAllText(modelPath);
using JsonDocument parsedJson = JsonDocument.Parse(jsonText);
MachineModel model = new MachineModel();
model.UpdateFromJson(parsedJson.RootElement);
MachineModel newModel = (MachineModel)model.Clone();
string serializedModel = newModel.ToString();
Assert.AreEqual(jsonText, serializedModel);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.State.AtxPower = true;
original.State.CurrentTool = 123;
original.State.DisplayMessage = "display message";
original.State.LogFile = "log file";
original.State.Mode = MachineMode.Laser;
original.State.Status = MachineStatus.Processing;
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.State.AtxPower, clone.State.AtxPower);
Assert.AreEqual(original.State.CurrentTool, clone.State.CurrentTool);
Assert.AreEqual(original.State.DisplayMessage, clone.State.DisplayMessage);
Assert.AreEqual(original.State.LogFile, clone.State.LogFile);
Assert.AreEqual(original.State.Mode, clone.State.Mode);
Assert.AreEqual(original.State.Status, clone.State.Status);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.State.AtxPower = true;
original.State.CurrentTool = 123;
original.State.Mode = MachineMode.Laser;
original.State.Status = MachineStatus.Processing;
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.State.AtxPower, clone.State.AtxPower);
Assert.AreEqual(original.State.CurrentTool, clone.State.CurrentTool);
Assert.AreEqual(original.State.Mode, clone.State.Mode);
Assert.AreEqual(original.State.Status, clone.State.Status);
Assert.AreNotSame(original.State.AtxPower, clone.State.AtxPower);
Assert.AreNotSame(original.State.CurrentTool, clone.State.CurrentTool);
Assert.AreNotSame(original.State.Mode, clone.State.Mode);
Assert.AreNotSame(original.State.Status, clone.State.Status);
}
public void Clone()
{
MachineModel original = new MachineModel();
Spindle spindle = new Spindle
{
Active = 123.45F,
Current = 45.678F
};
original.Spindles.Add(spindle);
DuetAPI.Machine.MachineModel clone = (DuetAPI.Machine.MachineModel)original.Clone();
Assert.AreEqual(1, original.Spindles.Count);
Assert.AreEqual(original.Spindles[0].Active, clone.Spindles[0].Active);
Assert.AreEqual(original.Spindles[0].Current, clone.Spindles[0].Current);
Assert.AreNotSame(original.Spindles[0].Active, clone.Spindles[0].Active);
Assert.AreNotSame(original.Spindles[0].Current, clone.Spindles[0].Current);
}
public void Clone()
{
MachineModel original = new MachineModel();
NetworkInterface iface = new NetworkInterface();
iface.ActiveProtocols.Add(NetworkProtocol.Telnet);
iface.MacAddress = "DE:AD:BE:EF:CA:FE";
iface.ActualIP = "12.34.56.78";
iface.ConfiguredIP = "34.34.56.78";
iface.FirmwareVersion = "Firmware version";
iface.Gateway = "12.34.56.1";
iface.NumReconnects = 123;
iface.Signal = -45;
iface.Speed = 56;
iface.Subnet = "255.0.255.0";
iface.Type = InterfaceType.LAN;
original.Network.Interfaces.Add(iface);
original.Network.Name = "Name";
original.Network.Password = "******";
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(1, original.Network.Interfaces.Count);
Assert.AreEqual(original.Network.Interfaces[0].ActiveProtocols, clone.Network.Interfaces[0].ActiveProtocols);
Assert.AreEqual(original.Network.Interfaces[0].MacAddress, clone.Network.Interfaces[0].MacAddress);
Assert.AreEqual(original.Network.Interfaces[0].ActualIP, clone.Network.Interfaces[0].ActualIP);
Assert.AreEqual(original.Network.Interfaces[0].ConfiguredIP, clone.Network.Interfaces[0].ConfiguredIP);
Assert.AreEqual(original.Network.Interfaces[0].FirmwareVersion, clone.Network.Interfaces[0].FirmwareVersion);
Assert.AreEqual(original.Network.Interfaces[0].Gateway, clone.Network.Interfaces[0].Gateway);
Assert.AreEqual(original.Network.Interfaces[0].NumReconnects, clone.Network.Interfaces[0].NumReconnects);
Assert.AreEqual(original.Network.Interfaces[0].Signal, clone.Network.Interfaces[0].Signal);
Assert.AreEqual(original.Network.Interfaces[0].Speed, clone.Network.Interfaces[0].Speed);
Assert.AreEqual(original.Network.Interfaces[0].Subnet, clone.Network.Interfaces[0].Subnet);
Assert.AreEqual(original.Network.Interfaces[0].Type, clone.Network.Interfaces[0].Type);
Assert.AreEqual(original.Network.Name, clone.Network.Name);
Assert.AreEqual(original.Network.Password, clone.Network.Password);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.Channels.SPI.RelativePositioning = true;
original.Channels.USB.Feedrate = 123;
original.Channels.File.Feedrate = 565;
original.Channels.File.UsingInches = true;
original.Channels.HTTP.RelativeExtrusion = true;
original.Channels.Telnet.Feedrate = 45;
original.Channels[DuetAPI.CodeChannel.Telnet].StackDepth = 5;
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.Channels.SPI.RelativePositioning, clone.Channels.SPI.RelativePositioning);
Assert.AreEqual(original.Channels.USB.Feedrate, clone.Channels.USB.Feedrate);
Assert.AreEqual(original.Channels.File.Feedrate, clone.Channels.File.Feedrate);
Assert.AreEqual(original.Channels.File.UsingInches, clone.Channels.File.UsingInches);
Assert.AreEqual(original.Channels.HTTP.RelativePositioning, clone.Channels.HTTP.RelativePositioning);
Assert.AreEqual(original.Channels.Telnet.Feedrate, clone.Channels.Telnet.Feedrate);
Assert.AreEqual(original.Channels.Telnet.StackDepth, clone.Channels.Telnet.StackDepth);
}
public void Clone()
{
MachineModel original = new MachineModel();
Axis axis = new Axis
{
Homed = true,
Letter = 'X',
MachinePosition = 123,
Min = -789,
MinEndstop = 1,
MinProbed = true,
Max = 456,
MaxEndstop = 2,
MaxProbed = true
};
axis.Drives.Add(1);
axis.Drives.Add(2);
original.Move.Axes.Add(axis);
original.Move.BabystepZ = 0.34F;
original.Move.Compensation = "Compensation";
original.Move.CurrentMove.RequestedSpeed = 45;
original.Move.CurrentMove.TopSpeed = 30;
Drive drive = new Drive
{
Acceleration = 12,
Current = 1200,
MinSpeed = 10,
MaxSpeed = 400,
Position = 56
};
drive.Microstepping.Interpolated = false;
drive.Microstepping.Value = 256;
original.Move.Drives.Add(drive);
Extruder extruder = new Extruder
{
Factor = 1.23F
};
extruder.Nonlinear.A = 1;
extruder.Nonlinear.B = 2;
extruder.Nonlinear.Temperature = 56;
extruder.Nonlinear.UpperLimit = 78;
original.Move.Extruders.Add(extruder);
original.Move.Geometry.Type = GeometryType.Delta;
original.Move.Idle.Factor = 0.8F;
original.Move.Idle.Timeout = 50;
original.Move.SpeedFactor = 1.45F;
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(1, clone.Move.Axes.Count);
Assert.AreEqual(original.Move.Axes[0].Drives, clone.Move.Axes[0].Drives);
Assert.AreEqual(original.Move.Axes[0].Homed, clone.Move.Axes[0].Homed);
Assert.AreEqual(original.Move.Axes[0].Letter, clone.Move.Axes[0].Letter);
Assert.AreEqual(original.Move.Axes[0].MachinePosition, clone.Move.Axes[0].MachinePosition);
Assert.AreEqual(original.Move.Axes[0].Min, clone.Move.Axes[0].Min);
Assert.AreEqual(original.Move.Axes[0].MinEndstop, clone.Move.Axes[0].MinEndstop);
Assert.AreEqual(original.Move.Axes[0].MinProbed, clone.Move.Axes[0].MinProbed);
Assert.AreEqual(original.Move.Axes[0].Max, clone.Move.Axes[0].Max);
Assert.AreEqual(original.Move.Axes[0].MaxEndstop, clone.Move.Axes[0].MaxEndstop);
Assert.AreEqual(original.Move.Axes[0].MaxProbed, clone.Move.Axes[0].MaxProbed);
Assert.AreEqual(original.Move.BabystepZ, clone.Move.BabystepZ);
Assert.AreEqual(original.Move.Compensation, clone.Move.Compensation);
Assert.AreEqual(original.Move.CurrentMove.RequestedSpeed, clone.Move.CurrentMove.RequestedSpeed);
Assert.AreEqual(original.Move.CurrentMove.TopSpeed, clone.Move.CurrentMove.TopSpeed);
Assert.AreEqual(1, clone.Move.Drives.Count);
Assert.AreEqual(original.Move.Drives[0].Acceleration, clone.Move.Drives[0].Acceleration);
Assert.AreEqual(original.Move.Drives[0].Current, clone.Move.Drives[0].Current);
Assert.AreEqual(original.Move.Drives[0].MaxSpeed, clone.Move.Drives[0].MaxSpeed);
Assert.AreEqual(original.Move.Drives[0].Microstepping.Interpolated, clone.Move.Drives[0].Microstepping.Interpolated);
Assert.AreEqual(original.Move.Drives[0].Microstepping.Value, clone.Move.Drives[0].Microstepping.Value);
Assert.AreEqual(original.Move.Drives[0].MinSpeed, clone.Move.Drives[0].MinSpeed);
Assert.AreEqual(original.Move.Drives[0].Position, clone.Move.Drives[0].Position);
Assert.AreEqual(1, clone.Move.Extruders.Count);
Assert.AreEqual(original.Move.Extruders[0].Factor, clone.Move.Extruders[0].Factor);
Assert.AreEqual(original.Move.Extruders[0].Nonlinear.A, clone.Move.Extruders[0].Nonlinear.A);
Assert.AreEqual(original.Move.Extruders[0].Nonlinear.B, clone.Move.Extruders[0].Nonlinear.B);
Assert.AreEqual(original.Move.Extruders[0].Nonlinear.Temperature, clone.Move.Extruders[0].Nonlinear.Temperature);
Assert.AreEqual(original.Move.Extruders[0].Nonlinear.UpperLimit, clone.Move.Extruders[0].Nonlinear.UpperLimit);
Assert.AreEqual(original.Move.Geometry.Type, clone.Move.Geometry.Type);
Assert.AreEqual(original.Move.Idle.Factor, clone.Move.Idle.Factor);
Assert.AreEqual(original.Move.Idle.Timeout, clone.Move.Idle.Timeout);
Assert.AreEqual(original.Move.SpeedFactor, clone.Move.SpeedFactor);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.Job.Duration = 123;
original.Job.ExtrudedRaw.Add(123F);
original.Job.ExtrudedRaw.Add(456F);
original.Job.ExtrudedRaw.Add(789F);
original.Job.File.Filament = new List <float> {
654F, 987F
};
original.Job.File.GeneratedBy = "Generated by";
original.Job.File.Height = 57;
original.Job.File.LayerHeight = 0.43F;
original.Job.File.FileName = "0:/gcodes/somefile.g";
original.Job.File.NumLayers = 467;
original.Job.File.PrintTime = 4566;
original.Job.File.SimulatedTime = 7964;
original.Job.File.Size = 4645645;
original.Job.FilePosition = 32423;
original.Job.LastFileName = "0:/gcodes/lastfile.g";
original.Job.LastFileAborted = true;
original.Job.LastFileCancelled = true;
original.Job.LastFileSimulated = true;
original.Job.Layer = 4;
original.Job.Layers.Add(new Layer
{
Duration = 23,
Filament = new List <float> {
12F, 34F, 56F
},
FractionPrinted = 0.012F,
Height = 0.33F
});
original.Job.LayerTime = 4.3F;
original.Job.TimesLeft.Filament = 1234;
original.Job.TimesLeft.File = 234;
original.Job.TimesLeft.Layer = 345;
original.Job.WarmUpDuration = 34;
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.Job.Duration, clone.Job.Duration);
Assert.AreEqual(original.Job.ExtrudedRaw, clone.Job.ExtrudedRaw);
Assert.AreEqual(original.Job.File.Filament, clone.Job.File.Filament);
Assert.AreEqual(original.Job.File.GeneratedBy, clone.Job.File.GeneratedBy);
Assert.AreEqual(original.Job.File.Height, clone.Job.File.Height);
Assert.AreEqual(original.Job.File.LayerHeight, clone.Job.File.LayerHeight);
Assert.AreEqual(original.Job.File.FileName, clone.Job.File.FileName);
Assert.AreEqual(original.Job.File.NumLayers, clone.Job.File.NumLayers);
Assert.AreEqual(original.Job.File.PrintTime, clone.Job.File.PrintTime);
Assert.AreEqual(original.Job.File.SimulatedTime, clone.Job.File.SimulatedTime);
Assert.AreEqual(original.Job.File.Size, clone.Job.File.Size);
Assert.AreEqual(original.Job.FilePosition, clone.Job.FilePosition);
Assert.AreEqual(original.Job.LastFileName, clone.Job.LastFileName);
Assert.AreEqual(original.Job.LastFileAborted, clone.Job.LastFileAborted);
Assert.AreEqual(original.Job.LastFileCancelled, clone.Job.LastFileCancelled);
Assert.AreEqual(original.Job.LastFileSimulated, clone.Job.LastFileSimulated);
Assert.AreEqual(original.Job.Layer, clone.Job.Layer);
Assert.AreEqual(1, original.Job.Layers.Count);
Assert.AreEqual(original.Job.Layers[0].Duration, clone.Job.Layers[0].Duration);
Assert.AreEqual(original.Job.Layers[0].Filament, clone.Job.Layers[0].Filament);
Assert.AreEqual(original.Job.Layers[0].FractionPrinted, clone.Job.Layers[0].FractionPrinted);
Assert.AreEqual(original.Job.Layers[0].Height, clone.Job.Layers[0].Height);
Assert.AreEqual(original.Job.LayerTime, clone.Job.LayerTime);
Assert.AreEqual(original.Job.TimesLeft.Filament, clone.Job.TimesLeft.Filament);
Assert.AreEqual(original.Job.TimesLeft.File, clone.Job.TimesLeft.File);
Assert.AreEqual(original.Job.TimesLeft.Layer, clone.Job.TimesLeft.Layer);
Assert.AreEqual(original.Job.WarmUpDuration, clone.Job.WarmUpDuration);
}
public void Clone()
{
MachineModel original = new MachineModel();
BedOrChamber bed = new BedOrChamber
{
Name = "Bed Name"
};
bed.Active.Add(123F);
bed.Standby.Add(456F);
bed.Heaters.Add(0);
original.Heat.Beds.Add(null);
original.Heat.Beds.Add(bed);
BedOrChamber chamber = new BedOrChamber
{
Name = "Chamber Name"
};
chamber.Active.Add(321F);
chamber.Standby.Add(654F);
chamber.Heaters.Add(4);
chamber.Heaters.Add(6);
original.Heat.Chambers.Add(null);
original.Heat.Chambers.Add(chamber);
original.Heat.ColdExtrudeTemperature = 678F;
original.Heat.ColdRetractTemperature = 987F;
ExtraHeater extraHeater = new ExtraHeater
{
Current = 123,
Name = "Extra Heater",
Sensor = 4,
State = HeaterState.Tuning
};
original.Heat.Extra.Add(extraHeater);
Heater heater = new Heater
{
Current = 567,
Max = 578,
Sensor = 6,
State = HeaterState.Standby
};
heater.Model.DeadTime = 322;
heater.Model.Gain = 673;
heater.Model.MaxPwm = 0.45F;
heater.Model.TimeConstant = 32;
original.Heat.Heaters.Add(heater);
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(2, original.Heat.Beds.Count);
Assert.AreEqual(original.Heat.Beds[0], null);
Assert.AreEqual(original.Heat.Beds[1].Active, clone.Heat.Beds[1].Active);
Assert.AreEqual(original.Heat.Beds[1].Standby, clone.Heat.Beds[1].Standby);
Assert.AreEqual(original.Heat.Beds[1].Name, clone.Heat.Beds[1].Name);
Assert.AreEqual(original.Heat.Beds[1].Heaters, clone.Heat.Beds[1].Heaters);
Assert.AreEqual(2, original.Heat.Chambers.Count);
Assert.AreEqual(original.Heat.Chambers[0], null);
Assert.AreEqual(original.Heat.Chambers[1].Active, clone.Heat.Chambers[1].Active);
Assert.AreEqual(original.Heat.Chambers[1].Standby, clone.Heat.Chambers[1].Standby);
Assert.AreEqual(original.Heat.Chambers[1].Name, clone.Heat.Chambers[1].Name);
Assert.AreEqual(original.Heat.Chambers[1].Heaters, clone.Heat.Chambers[1].Heaters);
Assert.AreEqual(original.Heat.ColdExtrudeTemperature, clone.Heat.ColdExtrudeTemperature);
Assert.AreEqual(original.Heat.ColdRetractTemperature, clone.Heat.ColdRetractTemperature);
Assert.AreEqual(1, original.Heat.Extra.Count);
Assert.AreEqual(original.Heat.Extra[0].Current, clone.Heat.Extra[0].Current);
Assert.AreEqual(original.Heat.Extra[0].Name, clone.Heat.Extra[0].Name);
Assert.AreEqual(original.Heat.Extra[0].Sensor, clone.Heat.Extra[0].Sensor);
Assert.AreEqual(original.Heat.Extra[0].State, clone.Heat.Extra[0].State);
Assert.AreEqual(1, original.Heat.Heaters.Count);
Assert.AreEqual(original.Heat.Heaters[0].Current, clone.Heat.Heaters[0].Current);
Assert.AreEqual(original.Heat.Heaters[0].Max, clone.Heat.Heaters[0].Max);
Assert.AreEqual(original.Heat.Heaters[0].Sensor, clone.Heat.Heaters[0].Sensor);
Assert.AreEqual(original.Heat.Heaters[0].State, clone.Heat.Heaters[0].State);
Assert.AreEqual(original.Heat.Heaters[0].Model.DeadTime, clone.Heat.Heaters[0].Model.DeadTime);
Assert.AreEqual(original.Heat.Heaters[0].Model.Gain, clone.Heat.Heaters[0].Model.Gain);
Assert.AreEqual(original.Heat.Heaters[0].Model.MaxPwm, clone.Heat.Heaters[0].Model.MaxPwm);
Assert.AreEqual(original.Heat.Heaters[0].Model.TimeConstant, clone.Heat.Heaters[0].Model.TimeConstant);
}
public void Clone()
{
MachineModel original = new MachineModel();
original.Electronics.Type = "Electronics Type";
original.Electronics.Name = "Electronics Name";
original.Electronics.Revision = "Electronics Revision";
original.Electronics.Firmware.Name = "Firmware Name";
original.Electronics.Firmware.Version = "Firmware Version";
original.Electronics.Firmware.Date = "Firmware Date";
original.Electronics.ProcessorID = "Processor ID";
original.Electronics.VIn.Current = 321;
original.Electronics.VIn.Min = 654;
original.Electronics.VIn.Max = 987;
original.Electronics.McuTemp.Current = 123;
original.Electronics.McuTemp.Min = 456;
original.Electronics.McuTemp.Max = 789;
ExpansionBoard expansionBoard = new ExpansionBoard();
expansionBoard.Name = "Expansion Name";
expansionBoard.Revision = "Expansion Revision";
expansionBoard.Firmware.Name = "Expansion Firmware Name";
expansionBoard.Firmware.Date = "Expansion Firmware Date";
expansionBoard.Firmware.Version = "Expansion Firmware Version";
expansionBoard.VIn.Current = 321;
expansionBoard.VIn.Min = 654;
expansionBoard.VIn.Max = 987;
expansionBoard.McuTemp.Current = 123;
expansionBoard.McuTemp.Min = 456;
expansionBoard.McuTemp.Max = 789;
expansionBoard.MaxHeaters = 12;
expansionBoard.MaxMotors = 6;
original.Electronics.ExpansionBoards.Add(expansionBoard);
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(original.Electronics.Type, clone.Electronics.Type);
Assert.AreEqual(original.Electronics.Name, clone.Electronics.Name);
Assert.AreEqual(original.Electronics.Revision, clone.Electronics.Revision);
Assert.AreEqual(original.Electronics.Firmware.Name, clone.Electronics.Firmware.Name);
Assert.AreEqual(original.Electronics.Firmware.Version, clone.Electronics.Firmware.Version);
Assert.AreEqual(original.Electronics.Firmware.Date, clone.Electronics.Firmware.Date);
Assert.AreEqual(original.Electronics.ProcessorID, clone.Electronics.ProcessorID);
Assert.AreEqual(original.Electronics.VIn.Current, clone.Electronics.VIn.Current);
Assert.AreEqual(original.Electronics.VIn.Min, clone.Electronics.VIn.Min);
Assert.AreEqual(original.Electronics.VIn.Max, clone.Electronics.VIn.Max);
Assert.AreEqual(original.Electronics.McuTemp.Current, clone.Electronics.McuTemp.Current);
Assert.AreEqual(original.Electronics.McuTemp.Min, clone.Electronics.McuTemp.Min);
Assert.AreEqual(original.Electronics.McuTemp.Max, clone.Electronics.McuTemp.Max);
Assert.AreEqual(1, clone.Electronics.ExpansionBoards.Count);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].Name, clone.Electronics.ExpansionBoards[0].Name);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].Revision, clone.Electronics.ExpansionBoards[0].Revision);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].Firmware.Name, clone.Electronics.ExpansionBoards[0].Firmware.Name);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].Firmware.Date, clone.Electronics.ExpansionBoards[0].Firmware.Date);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].Firmware.Version, clone.Electronics.ExpansionBoards[0].Firmware.Version);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].VIn.Current, clone.Electronics.ExpansionBoards[0].VIn.Current);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].VIn.Min, clone.Electronics.ExpansionBoards[0].VIn.Min);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].VIn.Max, clone.Electronics.ExpansionBoards[0].VIn.Max);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].McuTemp.Current, clone.Electronics.ExpansionBoards[0].McuTemp.Current);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].McuTemp.Min, clone.Electronics.ExpansionBoards[0].McuTemp.Min);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].McuTemp.Max, clone.Electronics.ExpansionBoards[0].McuTemp.Max);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].MaxHeaters, clone.Electronics.ExpansionBoards[0].MaxHeaters);
Assert.AreEqual(original.Electronics.ExpansionBoards[0].MaxMotors, clone.Electronics.ExpansionBoards[0].MaxMotors);
Assert.AreNotSame(original.Electronics.Type, clone.Electronics.Type);
Assert.AreNotSame(original.Electronics.Name, clone.Electronics.Name);
Assert.AreNotSame(original.Electronics.Revision, clone.Electronics.Revision);
Assert.AreNotSame(original.Electronics.Firmware.Name, clone.Electronics.Firmware.Name);
Assert.AreNotSame(original.Electronics.Firmware.Version, clone.Electronics.Firmware.Version);
Assert.AreNotSame(original.Electronics.Firmware.Date, clone.Electronics.Firmware.Date);
Assert.AreNotSame(original.Electronics.ProcessorID, clone.Electronics.ProcessorID);
Assert.AreNotSame(original.Electronics.VIn.Current, clone.Electronics.VIn.Current);
Assert.AreNotSame(original.Electronics.VIn.Min, clone.Electronics.VIn.Min);
Assert.AreNotSame(original.Electronics.VIn.Max, clone.Electronics.VIn.Max);
Assert.AreNotSame(original.Electronics.McuTemp.Current, clone.Electronics.McuTemp.Current);
Assert.AreNotSame(original.Electronics.McuTemp.Min, clone.Electronics.McuTemp.Min);
Assert.AreNotSame(original.Electronics.McuTemp.Max, clone.Electronics.McuTemp.Max);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].Name, clone.Electronics.ExpansionBoards[0].Name);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].Revision, clone.Electronics.ExpansionBoards[0].Revision);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].Firmware.Name, clone.Electronics.ExpansionBoards[0].Firmware.Name);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].Firmware.Date, clone.Electronics.ExpansionBoards[0].Firmware.Date);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].Firmware.Version, clone.Electronics.ExpansionBoards[0].Firmware.Version);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].VIn.Current, clone.Electronics.ExpansionBoards[0].VIn.Current);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].VIn.Min, clone.Electronics.ExpansionBoards[0].VIn.Min);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].VIn.Max, clone.Electronics.ExpansionBoards[0].VIn.Max);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].McuTemp.Current, clone.Electronics.ExpansionBoards[0].McuTemp.Current);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].McuTemp.Min, clone.Electronics.ExpansionBoards[0].McuTemp.Min);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].McuTemp.Max, clone.Electronics.ExpansionBoards[0].McuTemp.Max);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].MaxHeaters, clone.Electronics.ExpansionBoards[0].MaxHeaters);
Assert.AreNotSame(original.Electronics.ExpansionBoards[0].MaxMotors, clone.Electronics.ExpansionBoards[0].MaxMotors);
}
public void Clone()
{
MachineModel original = new MachineModel();
Endstop endstop = new Endstop
{
Position = EndstopPosition.HighEnd,
Triggered = true,
Type = EndstopType.MotorLoadDetection
};
original.Sensors.Endstops.Add(endstop);
Probe probe = new Probe
{
DisablesBed = true,
DiveHeight = 45.6F,
Inverted = true,
MaxProbeCount = 4,
RecoveryTime = 0.65F,
SecondaryValues = new int[] { 12, 34 },
Speed = 456,
Threshold = 678,
Tolerance = 0.42F,
TravelSpeed = 500,
TriggerHeight = 1.23F,
Type = ProbeType.E1Switch,
Value = 45
};
original.Sensors.Probes.Add(probe);
MachineModel clone = (MachineModel)original.Clone();
Assert.AreEqual(1, original.Sensors.Endstops.Count);
Assert.AreEqual(original.Sensors.Endstops[0].Position, clone.Sensors.Endstops[0].Position);
Assert.AreEqual(original.Sensors.Endstops[0].Triggered, clone.Sensors.Endstops[0].Triggered);
Assert.AreEqual(original.Sensors.Endstops[0].Type, clone.Sensors.Endstops[0].Type);
Assert.AreEqual(1, original.Sensors.Probes.Count);
Assert.AreEqual(original.Sensors.Probes[0].DisablesBed, clone.Sensors.Probes[0].DisablesBed);
Assert.AreEqual(original.Sensors.Probes[0].DiveHeight, clone.Sensors.Probes[0].DiveHeight);
Assert.AreEqual(original.Sensors.Probes[0].Inverted, clone.Sensors.Probes[0].Inverted);
Assert.AreEqual(original.Sensors.Probes[0].MaxProbeCount, clone.Sensors.Probes[0].MaxProbeCount);
Assert.AreEqual(original.Sensors.Probes[0].RecoveryTime, clone.Sensors.Probes[0].RecoveryTime);
Assert.AreEqual(original.Sensors.Probes[0].SecondaryValues, clone.Sensors.Probes[0].SecondaryValues);
Assert.AreEqual(original.Sensors.Probes[0].Speed, clone.Sensors.Probes[0].Speed);
Assert.AreEqual(original.Sensors.Probes[0].Threshold, clone.Sensors.Probes[0].Threshold);
Assert.AreEqual(original.Sensors.Probes[0].Tolerance, clone.Sensors.Probes[0].Tolerance);
Assert.AreEqual(original.Sensors.Probes[0].TravelSpeed, clone.Sensors.Probes[0].TravelSpeed);
Assert.AreEqual(original.Sensors.Probes[0].TriggerHeight, clone.Sensors.Probes[0].TriggerHeight);
Assert.AreEqual(original.Sensors.Probes[0].Type, clone.Sensors.Probes[0].Type);
Assert.AreEqual(original.Sensors.Probes[0].Value, clone.Sensors.Probes[0].Value);
Assert.AreNotSame(original.Sensors.Endstops[0].Position, clone.Sensors.Endstops[0].Position);
Assert.AreNotSame(original.Sensors.Endstops[0].Triggered, clone.Sensors.Endstops[0].Triggered);
Assert.AreNotSame(original.Sensors.Endstops[0].Type, clone.Sensors.Endstops[0].Type);
Assert.AreNotSame(original.Sensors.Probes[0].DisablesBed, clone.Sensors.Probes[0].DisablesBed);
Assert.AreNotSame(original.Sensors.Probes[0].DiveHeight, clone.Sensors.Probes[0].DiveHeight);
Assert.AreNotSame(original.Sensors.Probes[0].Inverted, clone.Sensors.Probes[0].Inverted);
Assert.AreNotSame(original.Sensors.Probes[0].MaxProbeCount, clone.Sensors.Probes[0].MaxProbeCount);
Assert.AreNotSame(original.Sensors.Probes[0].RecoveryTime, clone.Sensors.Probes[0].RecoveryTime);
Assert.AreNotSame(original.Sensors.Probes[0].SecondaryValues, clone.Sensors.Probes[0].SecondaryValues);
Assert.AreNotSame(original.Sensors.Probes[0].Speed, clone.Sensors.Probes[0].Speed);
Assert.AreNotSame(original.Sensors.Probes[0].Threshold, clone.Sensors.Probes[0].Threshold);
Assert.AreNotSame(original.Sensors.Probes[0].Tolerance, clone.Sensors.Probes[0].Tolerance);
Assert.AreNotSame(original.Sensors.Probes[0].TravelSpeed, clone.Sensors.Probes[0].TravelSpeed);
Assert.AreNotSame(original.Sensors.Probes[0].TriggerHeight, clone.Sensors.Probes[0].TriggerHeight);
Assert.AreNotSame(original.Sensors.Probes[0].Type, clone.Sensors.Probes[0].Type);
Assert.AreNotSame(original.Sensors.Probes[0].Value, clone.Sensors.Probes[0].Value);
}
