/**
* Specifies the network resource referenced by this <code>KMLNetworkLink</code>, or <code>null</code> if this link
* has no resource. If the specified <code>kmlRoot</code> is not <code>null</code, this link draws the
* <code>kmlRoot</code> during preRendering and rendering, and forwards property change events from the
* <code>kmlRoot</code> to this link's property change listeners.
*
* @param kmlRoot the network resource referenced by this <code>KMLNetworkLink</code>. May be <code>null</code>.
*
* @see #getNetworkResource()
*/
public void setNetworkResource(final KMLRoot kmlRoot)
{
// Remove any property change listeners previously set on the KMLRoot. This eliminates dangling references from
// the KMLNetworkLink to its previous KMLRoot.
KMLRoot resource = this.getNetworkResource();
if (resource != null)
{
resource.removePropertyChangeListener(this);
}
this.networkResource.set(kmlRoot);
this.networkResourceRetrievalTime.set(System.currentTimeMillis());
if (this.firstRetrievalTime == null)
{
this.firstRetrievalTime = new AtomicLong(this.networkResourceRetrievalTime.get());
}
// Set up to listen for property change events on the KMLRoot. KMLNetworkLink must forward REPAINT and REFRESH
// property change events from its internal KMLRoot to its parent KMLRoot to support BrowserBalloon repaint
// events and recursive KMLNetworkLink elements.
if (kmlRoot != null)
{
kmlRoot.addPropertyChangeListener(this);
// Apply any updates contained in the new root's optional network link control.
SwingUtilities.invokeLater(new Runnable()
{
void CheckOverlayWithinBounds(Feature feature)
{
var errors = new List<string>();
_geoArray = GeoArray.FromWellKnownText(feature.GetWellKnownText());
OnPropertyChanged("GeoArray");
#if false
if (_writeKML)
{
var kml = new KMLRoot();
var folder = new Folder("Overlay Segment Test");
var segments = _geoArray.Segments.ToArray();
for (var segment = 0; segment < segments.Length; segment++)
{
segments[segment].Placemark.name = string.Format("Segment {0}", segment);
folder.Add(segments[segment].Placemark);
}
kml.Document.Add(folder);
var savePath = Path.Combine(System.Environment.GetFolderPath(System.Environment.SpecialFolder.MyDocuments), "Overlay Segment Tests", "OverlaySegmentTest.kml");
kml.Save(savePath);
_writeKML = false;
}
#endif
if (_geoArray.HasCrossingSegments && !AreCrossingSegmentsAllowed) errors.Add("Perimeter segments may not cross");
if (_locationBoundsRectangle != null && !_locationBoundsRectangle.Contains(feature.GetShape())) errors.Add("Perimeter must be within location bounds");
var areaStyle = errors.Count > 0 ? _errorAreaStyle : _normalAreaStyle;
_wpfMap.EditOverlay.EditShapesLayer.ZoomLevelSet.ZoomLevel01.DefaultAreaStyle = areaStyle;
_wpfMap.EditOverlay.EditShapesLayer.ZoomLevelSet.ZoomLevel01.ApplyUntilZoomLevel = ApplyUntilZoomLevel.Level20;
Errors = errors.Count == 0 ? string.Empty : string.Join("\n", errors);
HasErrors = errors.Count > 0;
if (HasErrors) Debug.WriteLine(string.Format("Errors: {0}", Errors));
}
public KMLRoot getRoot()
{
if (root == null)
{
this.root = super.getRoot();
}
return(this.root);
}
private void button3_Click(object sender, EventArgs e)
{
KMLRoot kml = CreateKmlFeat();
LoadSave ls = new LoadSave("kml");
string fpath = ls.GetSavePath();
if (fpath != null)
{
kml.Save(fpath);
}
}
public void onMessage(Message msg)
{
KMLLink link = this.getLinkOrUrl();
if (link != null)
{
link.onMessage(msg);
}
KMLRoot networkResource = this.getNetworkResource();
if (networkResource != null)
{
networkResource.onMessage(msg);
}
}
private void button2_Click(object sender, EventArgs e)
{
LoadSave ls = new LoadSave("kml");
string fpath = ls.GetLoadPath();
if (fpath != null)
{
KMLRoot kml = KMLRoot.Load(fpath);
if (kml.UsesDocument)
{
MessageBox.Show("Loaded kml (doc): " + kml.Document.List.Count);
}
else
{
MessageBox.Show("Loaded kml (feature): " + kml.Feature.name);
}
}
}
private KMLRoot CreateKmlDoc()
{
KMLRoot kml = new KMLRoot();
Placemark pm = new Placemark();
pm.name = "foo";
pm.Point = new KmlPoint(120, 45, 50);
pm.Snippet = "foo is cool";
pm.Snippet.maxLines = 1;
Folder fldr = new Folder("Test Folder");
kml.Document.Add(pm);
kml.Document.Add(new Placemark());
kml.Document.Add(fldr);
return(kml);
}
private KMLRoot CreateKmlFeat()
{
KMLRoot kml = new KMLRoot();
Folder fldr = new Folder("Test Folder");
fldr.Add(new Folder("Sub Folder"));
GroundOverlay g = new GroundOverlay();
g.altitude = 100;
g.altitudeMode = AltitudeMode.relativeToGround;
g.color = Color.Blue;
g.description = "Cool overlay";
fldr.Add(g);
kml.Feature = fldr;
return(kml);
}
public void writeKML(string filename)
{
try
{
writeGPX(filename);
}
catch
{ }
try
{
writeRinex(filename);
}
catch
{ }
try
{
writeWPFile(filename);
}
catch
{ }
try
{
writeParamFile(filename);
}
catch
{ }
Color[] colours =
{
Color.Red, Color.Orange, Color.Yellow, Color.Green, Color.Blue, Color.Indigo,
Color.Violet, Color.Pink
};
AltitudeMode altmode = AltitudeMode.absolute;
KMLRoot kml = new KMLRoot();
Folder fldr = new Folder("Log");
Style style = new Style();
style.Id = "yellowLineGreenPoly";
style.Add(new LineStyle(HexStringToColor("7f00ffff"), 4));
Style style1 = new Style();
style1.Id = "spray";
style1.Add(new LineStyle(HexStringToColor("4c0000ff"), 0));
style1.Add(new PolyStyle()
{
Color = HexStringToColor("4c0000ff")
});
PolyStyle pstyle = new PolyStyle();
pstyle.Color = HexStringToColor("7f00ff00");
style.Add(pstyle);
kml.Document.AddStyle(style);
kml.Document.AddStyle(style1);
int stylecode = 0xff;
int g = -1;
foreach (List <Point3D> poslist in position)
{
g++;
if (poslist == null)
{
continue;
}
/*
* List<PointLatLngAlt> pllalist = new List<PointLatLngAlt>();
*
* foreach (var point in poslist)
* {
* pllalist.Add(new PointLatLngAlt(point.Y, point.X, point.Z, ""));
* }
*
* var ans = Utilities.LineOffset.GetPolygon(pllalist, 2);
*
*
*
* while (ans.Count > 0)
* {
* var first = ans[0];
* var second = ans[1];
* var secondlast = ans[ans.Count - 2];
* var last = ans[ans.Count-1];
*
* ans.Remove(first);
* ans.Remove(last);
*
* var polycoords = new BoundaryIs();
*
* polycoords.LinearRing = new LinearRing();
*
* polycoords.LinearRing.Coordinates.Add(new Point3D(first.Lng, first.Lat, 1));
* polycoords.LinearRing.Coordinates.Add(new Point3D(second.Lng, second.Lat, 1));
* polycoords.LinearRing.Coordinates.Add(new Point3D(secondlast.Lng, secondlast.Lat, 1));
* polycoords.LinearRing.Coordinates.Add(new Point3D(last.Lng, last.Lat, 1));
* polycoords.LinearRing.Coordinates.Add(new Point3D(first.Lng, first.Lat, 1));
*
* //if (!IsClockwise(polycoords.LinearRing.Coordinates))
* // polycoords.LinearRing.Coordinates.Reverse();
*
* Polygon kmlpoly = new Polygon() { AltitudeMode = AltitudeMode.relativeToGround, Extrude = false, OuterBoundaryIs = polycoords };
*
* Placemark pmpoly = new Placemark();
* pmpoly.Polygon = kmlpoly;
* pmpoly.name = g + " test";
* pmpoly.styleUrl = "#spray";
*
* fldr.Add(pmpoly);
* }
*/
LineString ls = new LineString();
ls.AltitudeMode = altmode;
ls.Extrude = true;
//ls.Tessellate = true;
Coordinates coords = new Coordinates();
coords.AddRange(poslist);
ls.coordinates = coords;
Placemark pm = new Placemark();
string mode = "";
if (g < modelist.Count)
{
mode = modelist[g];
}
pm.name = g + " Flight Path " + mode;
pm.styleUrl = "#yellowLineGreenPoly";
pm.LineString = ls;
stylecode = colours[g % (colours.Length - 1)].ToArgb();
Style style2 = new Style();
Color color = Color.FromArgb(0xff, (stylecode >> 16) & 0xff, (stylecode >> 8) & 0xff,
(stylecode >> 0) & 0xff);
log.Info("colour " + color.ToArgb().ToString("X") + " " + color.ToKnownColor().ToString());
style2.Add(new LineStyle(color, 4));
pm.AddStyle(style2);
fldr.Add(pm);
}
Placemark pmPOS = new Placemark();
pmPOS.name = "POS Message";
pmPOS.LineString = new LineString();
pmPOS.LineString.coordinates = new Coordinates();
Point3D lastPoint3D = new Point3D();
PointLatLngAlt lastplla = PointLatLngAlt.Zero;
foreach (var item in PosLatLngAlts)
{
var newpoint = new Point3D(item.Lng, item.Lat, item.Alt);
if (item.GetDistance(lastplla) < 0.1 &&
lastPoint3D.Z >= (newpoint.Z - 0.3) &&
lastPoint3D.Z <= (newpoint.Z + 0.3))
{
continue;
}
pmPOS.LineString.coordinates.Add(newpoint);
lastPoint3D = newpoint;
lastplla = item;
if (pmPOS.LineString.coordinates.Count > 20000)
{
//add current
pmPOS.AddStyle(style);
fldr.Add(pmPOS);
// create new
pmPOS = new Placemark();
pmPOS.name = "POS Message - extra";
pmPOS.LineString = new LineString();
pmPOS.LineString.coordinates = new Coordinates();
lastPoint3D = new Point3D();
lastplla = PointLatLngAlt.Zero;
}
}
pmPOS.AddStyle(style);
fldr.Add(pmPOS);
Folder planes = new Folder();
planes.name = "Planes";
fldr.Add(planes);
Folder waypoints = new Folder();
waypoints.name = "Waypoints";
fldr.Add(waypoints);
LineString lswp = new LineString();
lswp.AltitudeMode = AltitudeMode.relativeToGround;
lswp.Extrude = true;
Coordinates coordswp = new Coordinates();
foreach (PointLatLngAlt p1 in cmd)
{
if (p1.Lng == 0 && p1.Lat == 0)
{
continue;
}
coordswp.Add(new Point3D(p1.Lng, p1.Lat, p1.Alt));
}
lswp.coordinates = coordswp;
Placemark pmwp = new Placemark();
pmwp.name = "Waypoints";
//pm.styleUrl = "#yellowLineGreenPoly";
pmwp.LineString = lswp;
if (coordswp.Count > 0)
{
waypoints.Add(pmwp);
}
int a = 0;
int l = -1;
Model lastmodel = null;
foreach (Data mod in flightdata)
{
l++;
if (mod.model.Location.latitude == 0)
{
continue;
}
if (lastmodel != null)
{
if (lastmodel.Location.Equals(mod.model.Location))
{
continue;
}
}
Placemark pmplane = new Placemark();
pmplane.name = "Plane " + a;
pmplane.visibility = false;
Model model = mod.model;
model.AltitudeMode = altmode;
model.Scale.x = 2;
model.Scale.y = 2;
model.Scale.z = 2;
try
{
pmplane.description = @"<![CDATA[
<table>
<tr><td>Roll: " + model.Orientation.roll + @" </td></tr>
<tr><td>Pitch: " + model.Orientation.tilt + @" </td></tr>
<tr><td>Yaw: " + model.Orientation.heading + @" </td></tr>
<tr><td>WP dist " + mod.ntun[2] + @" </td></tr>
<tr><td>tar bear " + mod.ntun[3] + @" </td></tr>
<tr><td>nav bear " + mod.ntun[4] + @" </td></tr>
<tr><td>alt error " + mod.ntun[5] + @" </td></tr>
</table>
]]>";
}
catch
{
}
try
{
pmplane.Point = new KmlPoint((float)model.Location.longitude, (float)model.Location.latitude,
(float)model.Location.altitude);
pmplane.Point.AltitudeMode = altmode;
Link link = new Link();
link.href = "block_plane_0.dae";
model.Link = link;
pmplane.Model = model;
planes.Add(pmplane);
}
catch
{
} // bad lat long value
lastmodel = mod.model;
a++;
}
kml.Document.Add(fldr);
kml.Save(filename);
// create kmz - aka zip file
FileStream fs = File.Open(filename.ToLower().Replace(".log.kml", ".kmz").Replace(".bin.kml", ".kmz"),
FileMode.Create);
ZipOutputStream zipStream = new ZipOutputStream(fs);
zipStream.SetLevel(9); //0-9, 9 being the highest level of compression
zipStream.UseZip64 = UseZip64.Off; // older zipfile
// entry 1
string entryName = ZipEntry.CleanName(Path.GetFileName(filename));
// Removes drive from name and fixes slash direction
ZipEntry newEntry = new ZipEntry(entryName);
newEntry.DateTime = DateTime.Now;
zipStream.PutNextEntry(newEntry);
// Zip the file in buffered chunks
// the "using" will close the stream even if an exception occurs
byte[] buffer = new byte[4096];
using (FileStream streamReader = File.OpenRead(filename))
{
StreamUtils.Copy(streamReader, zipStream, buffer);
}
zipStream.CloseEntry();
File.Delete(filename);
filename = Settings.GetRunningDirectory() +
"block_plane_0.dae";
// entry 2
entryName = ZipEntry.CleanName(Path.GetFileName(filename));
// Removes drive from name and fixes slash direction
newEntry = new ZipEntry(entryName);
newEntry.DateTime = DateTime.Now;
zipStream.PutNextEntry(newEntry);
// Zip the file in buffered chunks
// the "using" will close the stream even if an exception occurs
buffer = new byte[4096];
using (FileStream streamReader = File.OpenRead(filename))
{
StreamUtils.Copy(streamReader, zipStream, buffer);
}
zipStream.CloseEntry();
zipStream.IsStreamOwner = true; // Makes the Close also Close the underlying stream
zipStream.Close();
positionindex = 0;
modelist.Clear();
flightdata.Clear();
position = new List <Core.Geometry.Point3D> [200];
cmd.Clear();
cmdraw.Clear();
}
private void writeKML(string filename)
{
try
{
writeGPX(filename);
}
catch { }
Color[] colours = { Color.Red, Color.Orange, Color.Yellow, Color.Green, Color.Blue, Color.Indigo, Color.Violet, Color.Pink };
AltitudeMode altmode = AltitudeMode.absolute;
// all new logs have both agl and asl, we are using asl. this may break old logs
// if (MainV2.comPort.MAV.cs.firmware == MainV2.Firmwares.ArduCopter2)
{
// altmode = AltitudeMode.relativeToGround; // because of sonar, this is both right and wrong. right for sonar, wrong in terms of gps as the land slopes off.
}
KMLRoot kml = new KMLRoot();
Folder fldr = new Folder("Log");
Style style = new Style();
style.Id = "yellowLineGreenPoly";
style.Add(new LineStyle(HexStringToColor("7f00ffff"), 4));
PolyStyle pstyle = new PolyStyle();
pstyle.Color = HexStringToColor("7f00ff00");
style.Add(pstyle);
kml.Document.AddStyle(style);
int stylecode = 0xff;
int g = -1;
foreach (List <Point3D> poslist in position)
{
g++;
if (poslist == null)
{
continue;
}
LineString ls = new LineString();
ls.AltitudeMode = altmode;
ls.Extrude = true;
//ls.Tessellate = true;
Coordinates coords = new Coordinates();
coords.AddRange(poslist);
ls.coordinates = coords;
Placemark pm = new Placemark();
string mode = "";
if (g < modelist.Count)
{
mode = modelist[g];
}
pm.name = g + " Flight Path " + mode;
pm.styleUrl = "#yellowLineGreenPoly";
pm.LineString = ls;
stylecode = colours[g % (colours.Length - 1)].ToArgb();
Style style2 = new Style();
Color color = Color.FromArgb(0xff, (stylecode >> 16) & 0xff, (stylecode >> 8) & 0xff, (stylecode >> 0) & 0xff);
log.Info("colour " + color.ToArgb().ToString("X") + " " + color.ToKnownColor().ToString());
style2.Add(new LineStyle(color, 4));
pm.AddStyle(style2);
fldr.Add(pm);
}
Folder planes = new Folder();
planes.name = "Planes";
fldr.Add(planes);
Folder waypoints = new Folder();
waypoints.name = "Waypoints";
fldr.Add(waypoints);
LineString lswp = new LineString();
lswp.AltitudeMode = AltitudeMode.relativeToGround;
lswp.Extrude = true;
Coordinates coordswp = new Coordinates();
foreach (PointLatLngAlt p1 in cmd)
{
coordswp.Add(new Point3D(p1.Lng, p1.Lat, p1.Alt));
}
lswp.coordinates = coordswp;
Placemark pmwp = new Placemark();
pmwp.name = "Waypoints";
//pm.styleUrl = "#yellowLineGreenPoly";
pmwp.LineString = lswp;
waypoints.Add(pmwp);
int a = 0;
int l = -1;
Model lastmodel = null;
foreach (Data mod in flightdata)
{
l++;
if (mod.model.Location.latitude == 0)
{
continue;
}
if (lastmodel != null)
{
if (lastmodel.Location.Equals(mod.model.Location))
{
continue;
}
}
Placemark pmplane = new Placemark();
pmplane.name = "Plane " + a;
pmplane.visibility = false;
Model model = mod.model;
model.AltitudeMode = altmode;
model.Scale.x = 2;
model.Scale.y = 2;
model.Scale.z = 2;
try
{
pmplane.description = @"<![CDATA[
<table>
<tr><td>Roll: " + model.Orientation.roll + @" </td></tr>
<tr><td>Pitch: " + model.Orientation.tilt + @" </td></tr>
<tr><td>Yaw: " + model.Orientation.heading + @" </td></tr>
<tr><td>WP dist " + mod.ntun[2] + @" </td></tr>
<tr><td>tar bear " + mod.ntun[3] + @" </td></tr>
<tr><td>nav bear " + mod.ntun[4] + @" </td></tr>
<tr><td>alt error " + mod.ntun[5] + @" </td></tr>
</table>
]]>";
}
catch { }
try
{
pmplane.Point = new KmlPoint((float)model.Location.longitude, (float)model.Location.latitude, (float)model.Location.altitude);
pmplane.Point.AltitudeMode = altmode;
Link link = new Link();
link.href = "block_plane_0.dae";
model.Link = link;
pmplane.Model = model;
planes.Add(pmplane);
}
catch { } // bad lat long value
lastmodel = mod.model;
a++;
}
kml.Document.Add(fldr);
kml.Save(filename);
// create kmz - aka zip file
FileStream fs = File.Open(filename.Replace(".log.kml", ".kmz"), FileMode.Create);
ZipOutputStream zipStream = new ZipOutputStream(fs);
zipStream.SetLevel(9); //0-9, 9 being the highest level of compression
zipStream.UseZip64 = UseZip64.Off; // older zipfile
// entry 1
string entryName = ZipEntry.CleanName(Path.GetFileName(filename)); // Removes drive from name and fixes slash direction
ZipEntry newEntry = new ZipEntry(entryName);
newEntry.DateTime = DateTime.Now;
zipStream.PutNextEntry(newEntry);
// Zip the file in buffered chunks
// the "using" will close the stream even if an exception occurs
byte[] buffer = new byte[4096];
using (FileStream streamReader = File.OpenRead(filename))
{
StreamUtils.Copy(streamReader, zipStream, buffer);
}
zipStream.CloseEntry();
File.Delete(filename);
filename = Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + "block_plane_0.dae";
// entry 2
entryName = ZipEntry.CleanName(Path.GetFileName(filename)); // Removes drive from name and fixes slash direction
newEntry = new ZipEntry(entryName);
newEntry.DateTime = DateTime.Now;
zipStream.PutNextEntry(newEntry);
// Zip the file in buffered chunks
// the "using" will close the stream even if an exception occurs
buffer = new byte[4096];
using (FileStream streamReader = File.OpenRead(filename))
{
StreamUtils.Copy(streamReader, zipStream, buffer);
}
zipStream.CloseEntry();
zipStream.IsStreamOwner = true; // Makes the Close also Close the underlying stream
zipStream.Close();
positionindex = 0;
modelist.Clear();
flightdata.Clear();
position = new List <Core.Geometry.Point3D> [200];
cmd.Clear();
}