protected override void OnClick()
{
//first check that we are currently editing
if (ArcMap.Editor.EditState != esriEditState.esriStateEditing)
{
MessageBox.Show("Please start editing and try again.", "Sample Code");
return;
}
//get the cadastral editor
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
//get the fabric line layers that belong to the target fabric.
// **SAMPLE CODE NOTE**
//This next function allows for more than 1 fabric lines sublayer in the map document, and uses a line layer array
//However, this sample code assumes just one line fabric sub layer, and works with the first found
//The function is provided for other expanded uses if needed elsewhere.
IArray LineLayerArray;
if (!GetFabricSubLayers(ArcMap.Document.ActiveView.FocusMap, esriCadastralFabricTable.esriCFTLines,
true, pCadEd.CadastralFabric, out LineLayerArray))
{
return;
}
// get the line selection; this code sample uses first line layer for the target fabric (first element)
ISelectionSet2 LineSelection =
GetSelectionFromLayer(LineLayerArray.get_Element(0) as ICadastralFabricSubLayer);
// check to see if there is only one parcel line selected
// **SAMPLE CODE NOTE**
//This sample code ensures one line feature, although it can be easily adapted for use on
//multiple line selection.
if (LineSelection.Count != 1)
{
MessageBox.Show("Please select only one parcel line from the Target fabric.", "Sample Code");
return;
}
//Get a search cursor from the line selection to get the parcel id
//We need to get an edit lock on the parcel using the parcel id
//An edit lock will guarantee the edit will persist in a multi-user environment after a reconcile
ILongArray pParcelsToLock = new LongArrayClass();
IFIDSet pFIDSetForParcelRegen = new FIDSet();
ICursor pCur;
LineSelection.Search(null, false, out pCur);
//this cursor returns the selected lines
// **SAMPLE CODE NOTE**
//setup for potential use for multiple line selection, even though this sample uses a single line selection
//get the field indices for line attributes needed.
int idxParcelID = pCur.FindField("parcelid");
int idxToPointID = pCur.FindField("topointid");
int idxFromPointID = pCur.FindField("frompointid");
int idxCenterPtId = pCur.FindField("centerpointid");
int idxDistance = pCur.FindField("distance");
int idxRadius = pCur.FindField("radius");
int idxCategory = pCur.FindField("category");
//also need the fabric point table and fields
IFeatureClass pFabricPointsFC = (IFeatureClass)pCadEd.CadastralFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
int idxPointX = pFabricPointsFC.FindField("x");
int idxPointY = pFabricPointsFC.FindField("y");
int idxPointCtrPt = pFabricPointsFC.FindField("centerpoint");
var ListFromToPairsForRadialLines = new List <int[]>();
// **SAMPLE CODE NOTE**
//setup for potential use for multiple line selection, even though this sample uses a single line selection
//the list declared above is here for potential use in Add-ins that make use of multiple circular arc lines
int[] ParcelIdCtrPtIdFromId1FromId2;
IRow pRow = pCur.NextRow();
while (pRow != null)
{
int iParcelID = (int)pRow.get_Value(idxParcelID);
pParcelsToLock.Add(iParcelID); //LongArray for the parcel locks
pFIDSetForParcelRegen.Add(iParcelID); //FIDSet for the parcel regenerate
//now check for a center point id on the line; this is for the case of changing the radius of an existing curve
object value = pRow.get_Value(idxCenterPtId);
if (value != DBNull.Value)
{ //collecting information to remove radial lines
ParcelIdCtrPtIdFromId1FromId2 = new int[4]; // 4-element array
ParcelIdCtrPtIdFromId1FromId2[0] = iParcelID;
ParcelIdCtrPtIdFromId1FromId2[1] = (int)value; //center point is always the to point of the radial line
ParcelIdCtrPtIdFromId1FromId2[2] = (int)pRow.get_Value(idxFromPointID);
ParcelIdCtrPtIdFromId1FromId2[3] = (int)pRow.get_Value(idxToPointID);
// **SAMPLE CODE NOTE**
//now add the array, to the list to accomodate other add-ins that may use
//more than one selected circular arc line
ListFromToPairsForRadialLines.Add(ParcelIdCtrPtIdFromId1FromId2);
}
Marshal.ReleaseComObject(pRow);
pRow = pCur.NextRow();
}
Marshal.ReleaseComObject(pCur);
bool IsFileBasedGDB = (ArcMap.Editor.EditWorkspace.WorkspaceFactory.WorkspaceType !=
esriWorkspaceType.esriRemoteDatabaseWorkspace);
if (!IsFileBasedGDB)
{
//for file geodatabase creating a job is optional
//see if parcel locks can be obtained on the selected parcels. First create a job.
string NewJobName = "";
if (!CreateJob(pCadEd.CadastralFabric, "Sample Code change line to curve", out NewJobName))
{
return;
}
if (!TestForEditLocks(pCadEd.CadastralFabric, NewJobName, pParcelsToLock))
{
return;
}
}
//if we get this far, an edit lock has been acquired, or this is file geodatabase (no lock required)
//prompt the user for a new radius value
string sRadius = Interaction.InputBox("Enter a new Radius:", "Radius");
//**SAMPLE CODE NOTE** :
// using the Interaction class from the Microsfot Visual Basic library
// is a quick and easy way to provide an input dialog in a single line of code for sample purposes,
// without neeing to add a windows form, dockable window, or other UI elements into this project.
double dRadius = 0;
if (!Double.TryParse(sRadius, out dRadius))
{
return;
}
//we have a valid double value, so we can get ready to edit
IProgressDialogFactory pProgressorDialogFact = new ProgressDialogFactoryClass();
ITrackCancel pTrackCancel = new CancelTracker();
IStepProgressor pStepProgressor = pProgressorDialogFact.Create(pTrackCancel, ArcMap.Application.hWnd);
IProgressDialog2 pProgressorDialog = (IProgressDialog2)pStepProgressor;
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadEd.CadastralFabric;
try
{ //turn off the read-only flag on the lines table and points table
pSchemaEd.ReleaseReadOnlyFields(LineSelection.Target, esriCadastralFabricTable.esriCFTLines); //release read-only
pSchemaEd.ReleaseReadOnlyFields((ITable)pFabricPointsFC, esriCadastralFabricTable.esriCFTPoints); //release read-only
//start an edit operation
ArcMap.Editor.StartOperation();
//get an update cursor to make the edit on the line(s)
LineSelection.Update(null, false, out pCur);
pRow = pCur.NextRow();
int iChangeCount = 0;
while (pRow != null)
{
double dChord = (double)pRow.get_Value(idxDistance);
if (Math.Abs(dRadius) <= dChord / 2 && dRadius != 0) //minimum allowable radius is half the chord
{
Marshal.ReleaseComObject(pRow);
pRow = pCur.NextRow();
continue;
}
//compute a center point location from new radius, unless it's 0
int iNewCtrPtId = 0;
if (dRadius != 0)
{
IFeature pFeat = pRow as IFeature;
IPoint pCtrPt = ComputeCenterPointFromRadius(pFeat.Shape as IPolyline, dRadius, true);
IFeature pNewPointFeat = pFabricPointsFC.CreateFeature();
//**SAMPLE CODE NOTE** :
//if adding a large number of points (more than 20) then createfeature is not the fastest approach,
//Instead you would pre-allocate points using an insert cursor...
//At this point in the code, the normal geodatabase performance considerations apply
iNewCtrPtId = pNewPointFeat.OID;
pNewPointFeat.set_Value(idxPointX, pCtrPt.X);
pNewPointFeat.set_Value(idxPointY, pCtrPt.Y);
pNewPointFeat.set_Value(idxPointCtrPt, 1); //1 = true boolean
pNewPointFeat.Shape = pCtrPt;
pNewPointFeat.Store();
}
//get the initial radius if the line is a curve (radius is being updated)
object obj = pRow.get_Value(idxRadius);
bool bIsChangingFromCurve = (obj != DBNull.Value); //there is a radius value
obj = pRow.get_Value(idxCenterPtId);
bIsChangingFromCurve = bIsChangingFromCurve && (obj != DBNull.Value); //radius value and Ctr Pt ID exist
int iExistingCtrPtId = 0;
if (bIsChangingFromCurve)
{
iExistingCtrPtId = (int)obj;
}
if (dRadius == 0) //user entered value is zero meaning convert to straight line
{ //changing to a straight line so set the center point an radius to null
pRow.set_Value(idxRadius, DBNull.Value);
pRow.set_Value(idxCenterPtId, DBNull.Value);
}
else if (!bIsChangingFromCurve) //user entered a new radius, and the existing line is not a curve
{ //changing to a circular arc so set the radius, and set the center point id to the new point's OID
pRow.set_Value(idxRadius, dRadius);
pRow.set_Value(idxCenterPtId, iNewCtrPtId);
}
else if (bIsChangingFromCurve) //user entered a radius, and the existing line is a curve
{
pCur.UpdateRow(pRow);
}
iChangeCount++;
Marshal.ReleaseComObject(pRow);
pRow = pCur.NextRow();
}
Marshal.ReleaseComObject(pCur);
if (iChangeCount == 0)
{//if there are no changes then don't add to the edit operation stack
ArcMap.Editor.AbortOperation();
return;
}
if (ListFromToPairsForRadialLines.Count > 0)
{
IQueryFilter pQuFilter = new QueryFilter();
string sCat = LineSelection.Target.Fields.get_Field(idxCategory).Name;
string sToPt = LineSelection.Target.Fields.get_Field(idxToPointID).Name;
string sFromPt = LineSelection.Target.Fields.get_Field(idxFromPointID).Name;
string sParcelID = LineSelection.Target.Fields.get_Field(idxParcelID).Name;
string sInClauseToPts = "(";
string sInClauseFromPts = "(";
string sInClauseParcelIds = "(";
//**SAMPLE CODE NOTE** :
//The following In Clause, when contructed for production environments
//should take into account the token limit on Oracle database platforms. (<1000)
// the processing of the in clause should be broekn into blocks with the in cluase has no more than 1000 elements
foreach (int[] iParcelIdCtrPtIdFromId1FromId2 in ListFromToPairsForRadialLines)
{
if (sInClauseParcelIds.Length == 1)
{
sInClauseParcelIds += iParcelIdCtrPtIdFromId1FromId2[0].ToString();
}
else
{
sInClauseParcelIds += "," + iParcelIdCtrPtIdFromId1FromId2[0].ToString();
}
if (sInClauseToPts.Length == 1)
{
sInClauseToPts += iParcelIdCtrPtIdFromId1FromId2[1].ToString();
}
else
{
sInClauseToPts += "," + iParcelIdCtrPtIdFromId1FromId2[1].ToString();
}
if (sInClauseFromPts.Length == 1)
{
sInClauseFromPts += iParcelIdCtrPtIdFromId1FromId2[2].ToString();
sInClauseFromPts += "," + iParcelIdCtrPtIdFromId1FromId2[3].ToString();
}
else
{
sInClauseFromPts += "," + iParcelIdCtrPtIdFromId1FromId2[2].ToString();
sInClauseFromPts += "," + iParcelIdCtrPtIdFromId1FromId2[2].ToString();
}
}
pQuFilter.WhereClause = sCat + " = 4 AND " + sParcelID + " IN " + sInClauseParcelIds
+ ") AND " + sFromPt + " IN " + sInClauseFromPts
+ ") AND " + sToPt + " IN " + sInClauseToPts + ")";
LineSelection.Target.DeleteSearchedRows(pQuFilter);
}
//with the new information added to the line, the rest of the parcel needs to be updated
//regenerate the parcel using the parcel fidset
ICadastralFabricRegeneration pRegenFabric = new CadastralFabricRegenerator();
#region regenerator enum
// enum esriCadastralRegeneratorSetting
// esriCadastralRegenRegenerateGeometries = 1
// esriCadastralRegenRegenerateMissingRadials = 2,
// esriCadastralRegenRegenerateMissingPoints = 4,
// esriCadastralRegenRemoveOrphanPoints = 8,
// esriCadastralRegenRemoveInvalidLinePoints = 16,
// esriCadastralRegenSnapLinePoints = 32,
// esriCadastralRegenRepairLineSequencing = 64,
// esriCadastralRegenRepairPartConnectors = 128
// By default, the bitmask member is 0 which will only regenerate geometries.
// (equivalent to passing in regeneratorBitmask = 1)
#endregion
pRegenFabric.CadastralFabric = pCadEd.CadastralFabric;
pRegenFabric.RegeneratorBitmask = 7;
pRegenFabric.RegenerateParcels(pFIDSetForParcelRegen, false, pTrackCancel);
//15 (enum values of 8 means remove orphan points; this only works when doing entire fabric)
//TODO: remove orphaned center points programmatically
pStepProgressor.MinRange = 0;
pStepProgressor.MaxRange = iChangeCount;
pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
pRegenFabric.RegenerateParcels(pFIDSetForParcelRegen, false, pTrackCancel);
ArcMap.Editor.StopOperation("Change line radius");
}
catch (Exception ex)
{
ArcMap.Editor.AbortOperation();
MessageBox.Show(ex.Message);
}
finally
{
if (pSchemaEd != null)
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines);
}
pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
RefreshMap(LineLayerArray);
ICadastralExtensionManager pCExMan = (ICadastralExtensionManager)pCadEd;
IParcelPropertiesWindow2 pPropW = (IParcelPropertiesWindow2)pCExMan.ParcelPropertiesWindow;
pPropW.RefreshAll();
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
}
}
//public RegistryFindKey()
//{
//// '------------4/2/2012 ---------------
////'first get the service pack info to see if this code needs to run
////Dim sAns As String
////Dim bIsSP4 As Boolean = False
////Dim sErr As String = ""
////sAns = RegValue(RegistryHive.LocalMachine, "SOFTWARE\ESRI\Desktop10.0\CoreRuntime", "InstallVersion", sErr)
////bIsSP4 = (sAns = "10.0.4000")
////'also this workaround does not work in Manual Mode
////'check if there is a Manual Mode "modify" job active ===========
//}
public void SelectCadastralPropertyPage(ICadastralExtensionManager CadastralExtManager, string PageName)
{
//Set the property page to the lines grid [th]
IParcelPropertiesWindow2 pPPWnd2 = (IParcelPropertiesWindow2)CadastralExtManager.ParcelPropertiesWindow;
ICadastralEditorPages pPgs = (ICadastralEditorPages)pPPWnd2;
ICadastralEditorPage pPg = null;
int lPg = 0;
for (lPg = 0; lPg <= (pPPWnd2.PageCount - 1); lPg++)
{
pPg = pPPWnd2.get_Page(lPg);
if (pPg.PageName.ToLower() == PageName.ToLower())
{
pPgs.SelectPage(pPg);
break;
}
}
}
protected override void OnClick()
{
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
IParcelEditManager pParcEditorMan = (IParcelEditManager)pCadEd;
ICadastralExtensionManager pCadMan = pCadEd as ICadastralExtensionManager;
ICadastralPacketManager pCadPacketMan = (ICadastralPacketManager)pCadEd;
//bool bStartedWithPacketOpen = pCadPacketMan.PacketOpen;
if (!(pCadMan.ContextItem is IGSLine))
{
return;
}
IGSLine pGSLine = pCadMan.ContextItem as IGSLine;
if (pParcEditorMan == null)
{
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
if (pEd.EditState == esriEditState.esriStateNotEditing)
{
MessageBox.Show("Please start editing and try again.");
return;
}
IParcelConstruction pConstr = pParcEditorMan.ParcelConstruction;
ICadastralLinePoints2Ex pCadLPsEx = pConstr as ICadastralLinePoints2Ex;
ILongArray pLngArrBefore = pCadLPsEx.LinePoints;
List <int> lstLPBefore = new List <int>();
for (int i = 0; i < pLngArrBefore.Count; i++)
{
lstLPBefore.Add(pLngArrBefore.get_Element(i));
}
//first get the current set of breakpoints
Utilities FabUTILS = new Utilities();
FabUTILS.ExecuteCommand("{9987F18B-8CC4-4548-8C41-7DB51F289BB3}"); //Run COTS Breakline command
ILongArray pLngArrAfter = pCadLPsEx.LinePoints;
List <int> lstLPAfter = new List <int>();
for (int i = 0; i < pLngArrAfter.Count; i++)
{
lstLPAfter.Add(pLngArrAfter.get_Element(i));
}
List <int> lstNewBreakPoints = lstLPAfter.Except(lstLPBefore).ToList();
if (lstNewBreakPoints.Count == 0)
{
return;
}
IParcelConstruction4 pConstr4 = pConstr as IParcelConstruction4;
ICadastralPoints pCadastralPts = pConstr4 as ICadastralPoints;
IEnumCELines pCELines = new EnumCELinesClass();
IEnumGSLines pEnumGSLines = (IEnumGSLines)pCELines;
pCELines.Add(pGSLine);
//check if it's a construction line or parent line
bool bIsParentLine = true;
IEnumGSLines pEnumGSConstructionLines = pConstr4.GetLines(false, false);
IGSLine pGSTestLine = null;
IGSParcel pGSParc = null;
pEnumGSConstructionLines.Reset();
pEnumGSConstructionLines.Next(ref pGSParc, ref pGSTestLine);
while (pGSTestLine != null)
{
if ((pGSLine.FromPoint == pGSTestLine.FromPoint) && (pGSLine.ToPoint == pGSTestLine.ToPoint))
{
bIsParentLine = false;
break;
}
pEnumGSConstructionLines.Next(ref pGSParc, ref pGSTestLine);
}
IParcelLineFunctions3 pParcLineFunctions = new ParcelFunctionsClass();
IEnumGSLines pNewLinesEnum = pParcLineFunctions.BreakLinesAtLinePoints(pEnumGSLines, pCadastralPts, true, false);
IGSParcel pGSParcel = null;
IGSLine pGSNewLine = null;
ICadastralUndoRedo pCadUndoRedo = pConstr as ICadastralUndoRedo;
pCadUndoRedo.StartUndoRedoSession("Break-line");
pNewLinesEnum.Reset();
pNewLinesEnum.Next(ref pGSParcel, ref pGSNewLine);
while (pGSNewLine != null)
{
pConstr4.InsertGridRow(-1, pGSNewLine, true);
pNewLinesEnum.Next(ref pGSParcel, ref pGSNewLine);
}
ICadastralUnbuildableLines pUnbuildable = pConstr4 as ICadastralUnbuildableLines;
if (bIsParentLine)
{
pUnbuildable.AddLine(pGSLine);
}
else
{
pConstr4.Planarize(0.001); //delete the original construction line
}
pCadUndoRedo.WriteUndoRedoSession(true);
}
protected override void OnClick()
{
IEditor m_pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
if (m_pEd.EditState == esriEditState.esriStateNotEditing)
{
MessageBox.Show("Please start editing first, and try again.", "Start Editing", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
IArray PolygonLyrArr;
IMap pMap = m_pEd.Map;
ICadastralFabric pCadFabric = null;
//if we're in an edit session then grab the target fabric
if (m_pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
MessageBox.Show
("No Parcel Fabric found in the workspace you're editing.\r\nPlease re-start editing on a workspace with a fabric, and try again.",
"No Fabric found", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
Utilities Utils = new Utilities();
if (!Utils.GetFabricSubLayers(pMap, esriCadastralFabricTable.esriCFTParcels, out PolygonLyrArr))
{
return;
}
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadEd;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Area Calculation does not work when the parcel is open.\r\nPlease close the parcel and try again.",
"Calculate Stated Area", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
IActiveView pActiveView = ArcMap.Document.ActiveView;
CalcStatedAreaDLG CalcStatedArea = new CalcStatedAreaDLG();
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedEdit = false;
IWorkspace pWS = null;
ITable pParcelsTable = null;
IProgressDialog2 pProgressorDialog = null;
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
var pTool = ArcMap.Application.CurrentTool;
try
{
IFeatureLayer pFL = (IFeatureLayer)PolygonLyrArr.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!Utils.SetupEditEnvironment(pWS, pCadFabric, m_pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedEdit))
{
return;
}
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0)
{
MessageBox.Show("Please select some fabric parcels and try again.", "No Selection",
MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
ArcMap.Application.CurrentTool = null;
//Display the dialog
DialogResult pDialogResult = CalcStatedArea.ShowDialog();
if (pDialogResult != DialogResult.OK)
{
return;
}
m_bShowProgressor = (pSelSet.Count > 10) || pCadaSel.SelectedParcelCount > 10;
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 3; //(3 runs through the selection)
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
//pEnumGSParcels should take care of this automatically
//but need to do this for line sublayer
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting parcel data...";
}
//Add the OIDs of all the selected parcels into a new feature IDSet
int tokenLimit = 995;
List <int> oidList = new List <int>();
Dictionary <int, string> dict_ParcelSelection2CalculatedArea = new Dictionary <int, string>();
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
break;
}
}
int iDBId = pGSParcel.DatabaseId;
if (!oidList.Contains(iDBId))
{
oidList.Add(iDBId);
}
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
return;
}
}
string sSuffixUnit = CalcStatedArea.txtSuffix.Text;
int iAreaPrec = (int)CalcStatedArea.numDecPlaces.Value;
double dSqMPerUnit = 1;
if (CalcStatedArea.cboAreaUnit.FindStringExact("Acres") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 4046.86;
}
if (CalcStatedArea.cboAreaUnit.FindStringExact("Hectares") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 10000;
}
if (CalcStatedArea.cboAreaUnit.FindStringExact("Square Feet") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 0.09290304;
}
if (CalcStatedArea.cboAreaUnit.FindStringExact("Square Feet US") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 0.09290341;
}
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Computing areas...";
}
List <string> sInClauseList0 = null;
m_pQF = new QueryFilterClass();
if (oidList.Count() > 0)
{
sInClauseList0 = Utils.InClauseFromOIDsList(oidList, tokenLimit);
foreach (string sInClause in sInClauseList0)
{
m_pQF.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
CalculateStatedArea(m_pQF, pParcelsTable, pCadEd, m_pEd.Map.SpatialReference, dSqMPerUnit, sSuffixUnit,
iAreaPrec, ref dict_ParcelSelection2CalculatedArea, m_pTrackCancel);
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
return;
}
}
}
}
else
{
return;
}
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
return;
}
}
#region Create Cadastral Job
//string sTime = "";
//if (!bIsUnVersioned && !bIsFileBasedGDB)
//{
// //see if parcel locks can be obtained on the selected parcels. First create a job.
// DateTime localNow = DateTime.Now;
// sTime = Convert.ToString(localNow);
// ICadastralJob pJob = new CadastralJobClass();
// pJob.Name = sTime;
// pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
// pJob.Description = "Interpolate Z values on selected features";
// try
// {
// Int32 jobId = pCadFabric.CreateJob(pJob);
// }
// catch (COMException ex)
// {
// if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
// {
// MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
// }
// else
// {
// MessageBox.Show(ex.Message);
// }
// return;
// }
//}
#endregion
//ILongArray pTempParcelsLongArray = new LongArrayClass();
//List<int> lstParcelChanges = Utils.FIDsetToLongArray(m_pFIDSetParcels, ref pTempParcelsLongArray, ref pParcelIds, m_pStepProgressor);
if (m_pEd.EditState == esriEditState.esriStateEditing)
{
try
{
m_pEd.StartOperation();
}
catch
{
m_pEd.AbortOperation();//abort any open edit operations and try again
m_pEd.StartOperation();
}
}
if (bUseNonVersionedEdit)
{
if (!Utils.StartEditing(pWS, bIsUnVersioned))
{
return;
}
}
//ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
//pSchemaEd.ReleaseReadOnlyFields(pParcelsTable, esriCadastralFabricTable.esriCFTParcels);
int idxParcelStatedArea = pParcelsTable.FindField("STATEDAREA");
string ParcelStatedAreaFieldName = pParcelsTable.Fields.get_Field(idxParcelStatedArea).Name;
if (m_bShowProgressor)
{
// pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Updating parcel areas...";
}
IRow pTheFeatRow = null;
ICursor pUpdateCursor = null;
foreach (string sInClause in sInClauseList0)
{
m_pQF.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
if (bUseNonVersionedEdit)
{
ITableWrite pTableWr = (ITableWrite)pParcelsTable; //used for unversioned table
pUpdateCursor = pTableWr.UpdateRows(m_pQF, false);
}
else
{
pUpdateCursor = pParcelsTable.Update(m_pQF, false);
}
pTheFeatRow = pUpdateCursor.NextRow();
while (pTheFeatRow != null)
{
string sAreaString = dict_ParcelSelection2CalculatedArea[pTheFeatRow.OID];
pTheFeatRow.set_Value(idxParcelStatedArea, sAreaString);
pTheFeatRow.Store();
Marshal.ReleaseComObject(pTheFeatRow); //garbage collection
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
break;
}
}
pTheFeatRow = pUpdateCursor.NextRow();
}
Marshal.ReleaseComObject(pUpdateCursor); //garbage collection
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
break;
}
}
}
m_pEd.StopOperation("Calculate Stated Area");
//pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);//set fields back to read-only
}
catch (Exception ex)
{
if (m_pEd != null)
{
AbortEdits(bIsUnVersioned, m_pEd, pWS);
}
MessageBox.Show(ex.Message);
}
finally
{
ArcMap.Application.CurrentTool = pTool;
m_pStepProgressor = null;
m_pTrackCancel = null;
if (pProgressorDialog != null)
{
pProgressorDialog.HideDialog();
}
RefreshMap(pActiveView, PolygonLyrArr);
ICadastralExtensionManager pCExMan = (ICadastralExtensionManager)pCadEd;
IParcelPropertiesWindow2 pPropW = (IParcelPropertiesWindow2)pCExMan.ParcelPropertiesWindow;
pPropW.RefreshAll();
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
// refresh the attributes dialog
ISelectionEvents pSelEvents = (ISelectionEvents)m_pEd.Map;
pSelEvents.SelectionChanged();
if (bUseNonVersionedEdit)
{
pCadEd.CadastralFabricLayer = null;
PolygonLyrArr = null;
}
if (pMouseCursor != null)
{
pMouseCursor.SetCursor(0);
}
}
}