GD()
{
object snapMode = SnapMode.getOSnap();
try
{
ObjectId idPoly = ObjectId.Null;
double dblAngDock = 0, dblAng = 0;;
double dblLenDock = 0;
Point3d pnt3dA = Pub.pnt3dO; //point AHEAD
List <Point3d> pnts3dLim = new List <Point3d>();
ObjectId idCgPnt0 = ObjectId.Null, idCgPnt1 = ObjectId.Null, idCgPntBeg = ObjectId.Null, idCgPntEnd = ObjectId.Null;
string elev = UserInput.getCogoPoint("\nSelect Dock Begin Point: ", out idCgPntBeg, ObjectId.Null, osMode: 8);
if (idCgPntBeg == ObjectId.Null)
{
return;
}
Debug.Print(idCgPntBeg.getHandle().ToString());
Point3d pnt3dBeg = idCgPntBeg.getCogoPntCoordinates();
pnts3dLim.Add(pnt3dBeg);
elev = UserInput.getCogoPoint("\nSelect Dock End Point", out idCgPntEnd, idCgPntBeg, osMode: 8);
if (idCgPntEnd == ObjectId.Null)
{
return;
}
Debug.Print(idCgPntEnd.getHandle().ToString());
Point3d pnt3dEnd = idCgPntEnd.getCogoPntCoordinates();
pnts3dLim.Add(pnt3dEnd);
bool escape = false;
PromptStatus ps;
Point3d pnt3dX = UserInput.getPoint("\nSpecify point on side to grade dock: ", pnt3dBeg, out escape, out ps, osMode: 0);
if (pnt3dX == Pub.pnt3dO || escape)
{
return;
}
int side = 0;
if (Geom.testRight(pnt3dBeg, pnt3dEnd, pnt3dX) > 0)
{
side = -1;
}
else
{
side = 1;
}
double width = 60;
escape = UserInput.getUserInput(string.Format("\nEnter dock width: <{0}>:", width), out width, width);
if (escape)
{
return;
}
using (BaseObjs._acadDoc.LockDocument())
{
try
{
using (Transaction tr = BaseObjs.startTransactionDb())
{
dblAngDock = pnt3dBeg.getDirection(pnt3dEnd);
dblLenDock = pnt3dBeg.getDistance(pnt3dEnd);
double dblSlope = System.Math.Round(pnt3dBeg.getSlope(pnt3dEnd), 3);
dblAng = dblAngDock - pi / 2 * side;
ObjectIdCollection idsPoly3dX = new ObjectIdCollection();
List <ObjectId> idsCgPnts = new List <ObjectId>();
List <Point3d> pnts3d = new List <Point3d>();
pnts3d.Add(pnt3dBeg); //CgPntBeg
//Slope is not 0
if (dblSlope != 0)
{
pnt3dA = pnt3dBeg.traverse(dblAng, width, -0.01);
pnts3d.Add(pnt3dA); //Pnt 2
dblAng = dblAng + pi / 2 * side;
pnt3dA = pnt3dA.traverse(dblAng, dblLenDock, dblSlope);
pnts3d.Add(pnt3dA); //Pnt3
pnts3d.Add(pnt3dEnd); //Pnt4 - CgPntEnd
pnts3d.Add(pnt3dBeg); //Pnt5 - CgPntBeg
idsCgPnts = pnts3d.addBrklineSegmentsDock(out idsPoly3dX, apps.lnkBrks, side, idCgPntBeg, idCgPntEnd);
}
else
{
int k = 1;
int intDivide = (int)System.Math.Truncate(dblLenDock / 84) + 1;
if (intDivide % 2 != 0)
{
intDivide = intDivide + 1;
}
pnt3dA = pnt3dBeg.traverse(dblAng, width, -0.005); //Pnt2
pnts3d.Add(pnt3dA);
k++;
int x = 0;
dblAng = dblAng + pi / 2 * side;
double seg = dblLenDock / intDivide;
int updown = 1;
for (x = 0; x <= intDivide - 1; x++)
{
updown = -updown;
pnt3dA = pnt3dA.traverse(dblAng, seg, 0.005 * updown);
pnts3d.Add(pnt3dA); //points on outer edge of Dock from Pnt2 through Pnt3
k++;
}
pnts3d.Add(pnt3dEnd); //Pnt4 = CgPntEnd
int indexPntEnd = k++;
pnt3dA = pnt3dEnd;
dblAng = dblAng + pi * side; //+pi because skipped turning towards bldg because we have point already
for (x = 0; x <= intDivide - 1; x++)
{
pnt3dA = pnt3dA.traverse(dblAng, dblLenDock / intDivide, 0.0);
pnts3d.Add(pnt3dA); //points on inner edge of Dock from pntBeg to pntEnd
}
// don't need to add pnt3dBeg to end of list because it is calc'd in loop previous
idsCgPnts = pnts3d.addBrklineSegmentsDock(out idsPoly3dX, apps.lnkBrks, side, idCgPntBeg, idCgPntEnd, indexPntEnd);
List <ObjectId> idCgPntsX = new List <ObjectId>();
idCgPntsX.Add(idsCgPnts[1]); //CgPnt 2 at dock limit away from building
int intUBnd = idsCgPnts.Count;
x = -1;
int n = 1;
k = intUBnd / 2;
for (int j = 1; j <= k - 1; j++)
{
x = -x;
n = n + (intUBnd - 2 * j) * x;
System.Diagnostics.Debug.Print(string.Format("{0},{1}", j, n));
idCgPntsX.Add(idsCgPnts[n]);
}
ObjectId idPoly3d = ObjectId.Null;
for (int i = 1; i < idCgPntsX.Count; i++)
{
idCgPnt0 = idCgPntsX[i - 1];
idCgPnt1 = idCgPntsX[i];
idPoly3d = Draw.addPoly3d(idCgPnt0.getCogoPntCoordinates(), idCgPnt1.getCogoPntCoordinates(), "CPNT-BRKLINE");
idPoly3d.lnkPntsAndPoly3d(idCgPnt0, idCgPnt1, apps.lnkBrks);
idsPoly3dX.Add(idPoly3d);
}
}
Grading_Floor.modSurface("CPNT-ON", "Finish Surface", idsPoly3dX, false);
//}
tr.Commit();
}
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(string.Format("{0} cmdGD.cs: line: 181", ex.Message));
}
}
}
catch (System.Exception)
{
}
finally{
SnapMode.setOSnap((int)snapMode);
}
}
GD()
{
ObjectId idPoly = ObjectId.Null;
const string nameLayer = "CPNT-BRKLINE";
double dblAngDock = 0;
double dblLenDock = 0;
Point3d pnt3dA = Pub.pnt3dO; //point AHEAD
Point3d pnt3dB; //point BACK
int intSlopeSign = 0;
const double pi = System.Math.PI;
bool exists = false;
ObjectId idDictGRADEDOCK = Dict.getNamedDictionary("GRADEDOCK", out exists);
if (!exists)
{
Autodesk.AutoCAD.ApplicationServices.Core.Application.ShowAlertDialog("Run AVG - exiting .....");
}
List <Point3d> pnts3dLim = getDockLimits(); //use 0 as dock number i.e. do one dock at a time
bool escape = false;
double width = 60;
escape = UserInput.getUserInput(string.Format("Enter dock width: <{0}>:", width), out width, width);
if (escape)
{
return;
}
double height = 4.04;
escape = UserInput.getUserInput(string.Format("Enter dock height: <{0}>:", height), out height, height);
if (escape)
{
return;
}
ObjectId idDictBLDG = Dict.getSubDict(idDictGRADEDOCK, bldgNum); //bldgNum obtained @ getDockLimits
ObjectId idDictDOCKS = ObjectId.Null;
TypedValue[] tvs;
using (BaseObjs._acadDoc.LockDocument())
{
try
{
using (Transaction tr = BaseObjs.startTransactionDb())
{
ResultBuffer rb = Dict.getXRec(idDictBLDG, "HANDLE3D");
if (rb == null)
{
return;
}
tvs = rb.AsArray();
rb = Dict.getXRec(idDictBLDG, "SLOPE");
if (rb == null)
{
return;
}
tvs = rb.AsArray();
double dblSlope = (double)tvs[0].Value;
rb = Dict.getXRec(idDictBLDG, "CENTROID");
if (rb == null)
{
return;
}
tvs = rb.AsArray();
Point3d pnt3dCEN = new Point3d((double)tvs[0].Value, (double)tvs[1].Value, (double)tvs[2].Value);
rb = Dict.getXRec(idDictBLDG, "TARGET");
if (rb == null)
{
return;
}
tvs = rb.AsArray();
Point3d pnt3dTAR = new Point3d((double)tvs[0].Value, (double)tvs[1].Value, (double)tvs[2].Value);
double dblAngBase = pnt3dCEN.getDirection(pnt3dTAR);
ObjectIdCollection idsPoly3dX = new ObjectIdCollection();
List <Point3d> pnts3d = new List <Point3d>();
List <ObjectId> idsCgPnts = new List <ObjectId>();
try
{
Point3d pnt3dBEG = pnts3dLim[0];
Point3d pnt3dEND = pnts3dLim[1];
dblAngDock = Measure.getAzRadians(pnt3dBEG, pnt3dEND);
dblLenDock = pnt3dBEG.getDistance(pnt3dEND);
pnt3dB = pnt3dBEG;
if (pnt3dTAR != Pub.pnt3dO)
{
pnt3dA = new Point3d(pnt3dBEG.X, pnt3dBEG.Y, pnt3dTAR.Z + Geom.getCosineComponent(pnt3dCEN, pnt3dTAR, pnt3dBEG) * (dblSlope * -1) - height);
}
else
{
pnt3dA = new Point3d(pnt3dBEG.X, pnt3dBEG.Y, pnt3dCEN.Z - height); //assuming flat floor if pnt3dTAR is -1,-1,-1
}
pnts3d.Add(pnt3dA); //CgPnt 1
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(ex.Message + " cmdGD_old.cs: line: 113");
}
ObjectId idPoly3d = ObjectId.Null;
if (dblSlope != 0)
{
double angDock2 = System.Math.Round(dblAngDock, 2);
double angBase2 = System.Math.Round(dblAngBase, 2);
double modAngles = 0;
double angDiff = System.Math.Round(angBase2 - angDock2, 2);
if (angDiff == 0)
{
intSlopeSign = 1;
}
else
{
if (angBase2 > angDock2)
{
modAngles = angBase2.mod(angDock2);
}
else
{
modAngles = angDock2.mod(angBase2);
}
if (modAngles == 0)
{
if (angDiff > 0)
{
intSlopeSign = 1;
}
else if (angDiff < 0)
{
intSlopeSign = -1;
}
}
if (System.Math.Abs(angDiff) == System.Math.Round(pi / 2, 2))
{
intSlopeSign = 0;
}
}
}
if (intSlopeSign != 0)
{ // sloped floor
dblAngDock = dblAngDock - pi / 2;
pnt3dA = pnt3dA.traverse(dblAngDock, width, -0.01);
pnts3d.Add(pnt3dA); //CgPnt 2
dblAngDock = dblAngDock + pi / 2;
pnt3dA = pnt3dA.traverse(dblAngDock, dblLenDock, dblSlope * intSlopeSign * 1);
pnts3d.Add(pnt3dA); //Pnt3
dblAngDock = dblAngDock + pi / 2;
pnt3dA = pnt3dA.traverse(dblAngDock, width, 0.01);
pnts3d.Add(pnt3dA); //CgPnt 4
dblAngDock = dblAngDock + pi / 2;
pnt3dA = pnt3dA.traverse(dblAngDock, dblLenDock, dblSlope * intSlopeSign * -1);
pnts3d.Add(pnt3dA); //Pnt5
idPoly3d = pnts3d.build3dPolyDockApron("CPNT-ON", nameLayer, "GD", out idsCgPnts);
idsPoly3dX.Add(idPoly3d);
}
else
{
dblAngDock = dblAngDock - pi / 2;
pnt3dA = pnt3dA.traverse(dblAngDock, width, -0.005);
pnts3d.Add(pnt3dA); //Pnt2
int intDivide = (int)System.Math.Truncate(dblLenDock / 84) + 1;
if (intDivide % 2 != 0)
{
intDivide = intDivide + 1;
}
int x = 0;
dblAngDock = dblAngDock + pi / 2;
double seg = dblLenDock / intDivide;
int updown = 1;
for (x = 0; x <= intDivide - 1; x++)
{
updown = -updown;
pnt3dA = pnt3dA.traverse(dblAngDock, seg, 0.005 * updown);
pnts3d.Add(pnt3dA);
}
dblAngDock = dblAngDock + pi / 2;
pnt3dA = pnt3dA.traverse(dblAngDock, width, 0.005);
pnts3d.Add(pnt3dA);
dblAngDock = dblAngDock + pi / 2;
for (x = 0; x <= intDivide - 1; x++)
{
pnt3dA = pnt3dA.traverse(dblAngDock, dblLenDock / intDivide, 0.0);
pnts3d.Add(pnt3dA);
}
idPoly3d = pnts3d.build3dPolyDockApron("CPNT-ON", nameLayer, "GD", out idsCgPnts);
idsPoly3dX.Add(idPoly3d);
List <ObjectId> idCgPntsX = new List <ObjectId>();
idCgPntsX.Add(idsCgPnts[1]); //CgPnt 2 at dock limit away from building
int intUBnd = idsCgPnts.Count;
x = -1;
int n = 1;
int k = intUBnd / 2;
for (int j = 1; j <= k - 1; j++)
{
x = -x;
n = n + (intUBnd - 2 * j) * x;
System.Diagnostics.Debug.Print(string.Format("{0},{1}", j, n));
idCgPntsX.Add(idsCgPnts[n]);
}
for (int i = 1; i < idCgPntsX.Count; i++)
{
List <ObjectId> idsCogoPnts = new List <ObjectId> {
idCgPntsX[i - 1], idCgPntsX[i - 0]
};
idPoly3d = BrkLine.makeBreakline(apps.lnkBrks, "GD", out idPoly, idsCogoPnts);
idsPoly3dX.Add(idPoly3d);
}
}
Grading_Floor.modSurface("CPNT-ON", "Finish Surface", idsPoly3dX, false);
tr.Commit();
}
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(ex.Message + " cmdGD_old.cs: line: 238");
}
}
}
