private void RefreshGlobe(GSOExtendSectionLineStyle3D extentSectionLineStyle3D) { mfeature.Geometry.Style = extentSectionLineStyle3D; mfeature.Geometry.AltitudeMode = EnumAltitudeMode.RelativeToGround; if (m_GlobeControl != null) { m_GlobeControl.Globe.Refresh(); } }
private GSOGeoPolyline3D CreatePipeRect(GSOGeoPolyline3D line, double width, double height) { GSOGeoPolyline3D cloneline = line.Clone() as GSOGeoPolyline3D; GSOExtendSectionLineStyle3D style = createRectStyle(width, height); if (style == null) { return(null); } cloneline.Style = style; return(cloneline); }
private void SetControlsByStyle(GSOStyle style) { if (m_Style != null) { extentSectionLineStyle3D = m_Style as GSOExtendSectionLineStyle3D; if (extentSectionLineStyle3D == null) { extentSectionLineStyle3D = new GSOExtendSectionLineStyle3D(); extentSectionLineStyle3D.LineColor = Color.Green; GSOPoint3ds points = new GSOPoint3ds(); points.Add(new GSOPoint3d(-0.5, 0.5, 0)); points.Add(new GSOPoint3d(-0.5, -0.5, 0)); points.Add(new GSOPoint3d(0.5, -0.5, 0)); points.Add(new GSOPoint3d(0.5, 0.5, 0)); extentSectionLineStyle3D.SetSectionPoints(points); RefreshGlobe(extentSectionLineStyle3D); } } else { extentSectionLineStyle3D = new GSOExtendSectionLineStyle3D(); extentSectionLineStyle3D.LineColor = Color.Green; GSOPoint3ds points = new GSOPoint3ds(); points.Add(new GSOPoint3d(-0.5, 0.5, 0)); points.Add(new GSOPoint3d(-0.5, -0.5, 0)); points.Add(new GSOPoint3d(0.5, -0.5, 0)); points.Add(new GSOPoint3d(0.5, 0.5, 0)); extentSectionLineStyle3D.SetSectionPoints(points); RefreshGlobe(extentSectionLineStyle3D); } // 这句要写到前面,不然下面Checked的时候要检查 pictureBoxLineColor.BackColor = extentSectionLineStyle3D.LineColor; numericUpDownLineOpaque.Value = extentSectionLineStyle3D.LineColor.A; textBoxCornerSliceAngle.Text = extentSectionLineStyle3D.CornerSliceAngle.ToString(); GSOPoint3ds mpoints = extentSectionLineStyle3D.GetSectionPoints(); if (mpoints != null && mpoints.Count > 0) { for (int i = 0; i < mpoints.Count; i++) { GSOPoint3d point = mpoints[i]; if (point != null) { textBoxLineRadius.Text = (Math.Abs(point.X) * 2).ToString(); textBoxThickness.Text = (Math.Abs(point.Y) * 2).ToString(); break; } } } m_bInitialized = true; }
private GSOFeature CreatePipeRect(GSOFeature shp_feat, GSOGeoPolyline3D line, double width, double height) { GSOFeature newRectfeat = new GSOFeature(); GSOGeoPolyline3D cloneline = line.Clone() as GSOGeoPolyline3D; GSOExtendSectionLineStyle3D style = createRectStyle(width, height); if (style == null) { return(null); } cloneline.Style = style; newRectfeat.Geometry = cloneline; return(newRectfeat); }
private void SetControlsByStyle(GSOStyle style) { if (style != null) { GSOPipeLineStyle3D pipelineStyle = style as GSOPipeLineStyle3D; if (pipelineStyle != null) { AddTabPages("pipelineStyle", "管线", new CtrlPipelineStyleSetting(pipelineStyle, mfeature, mlayer, m_GlobeControl)); } else { GSOSimpleLineStyle3D simpleLineStyle = style as GSOSimpleLineStyle3D; if (simpleLineStyle != null) { AddTabPages("simpleLineStyle", "简单线", new CtrlLineStyleSetting(simpleLineStyle, mfeature, mlayer, m_GlobeControl)); } else { GSOExtendSectionLineStyle3D extentSectionLineStyle = style as GSOExtendSectionLineStyle3D; if (extentSectionLineStyle != null) { AddTabPages("extendSectionLineStyle", "管沟", new CtrlExtentSectionlineStyleSetting(extentSectionLineStyle, mfeature, mlayer, m_GlobeControl)); } } } checkBoxUseStyle.Checked = true; GSOLineStyle3D lineStyle = style as GSOLineStyle3D; if (lineStyle != null && lineStyle.ArrowVisible && lineStyle.ArrowStyle != null) { checkBoxShowArrow.Checked = true; } else { checkBoxShowArrow.Checked = false; } } else { checkBoxUseStyle.Checked = false; checkBoxShowArrow.Checked = false; } CheckControlsEnable(checkBoxUseStyle.Checked); }
private GSOExtendSectionLineStyle3D createRectStyle(double width, double height) { GSOExtendSectionLineStyle3D style = new GSOExtendSectionLineStyle3D(); style.LineColor = Color.FromArgb(Convert.ToByte(numOpaqueRect.Value), btnRectColor.BackColor); if (width == 0 || height == 0) { return(null); } GSOPoint3ds sectionpts = new GSOPoint3ds(); sectionpts.Add(new GSOPoint3d(width / -2, height / 2, 0)); sectionpts.Add(new GSOPoint3d(width / -2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / 2, 0)); style.SetSectionPoints(sectionpts); style.IsClosed = true; style.SetAnchorByAlign(EnumAlign.MiddleCenter); return(style); }
private void btnCreateModel_Click(object sender, EventArgs e) { try { if (string.IsNullOrEmpty(txtModelLayer.Text)) { MessageBox.Show("管线模型文件路径无效!", "提示"); return; } if (File.Exists(txtModelLayer.Text)) { MessageBox.Show("管线模型文件已存在!", "提示"); return; } GSOLayer sourceLayer = ctl.Globe.Layers[cmbLayer.SelectedIndex]; GSOLayer layer = ctl.Globe.Layers.Add(txtModelLayer.Text); lgdFilePath = txtModelLayer.Text; if (layer != null) { GSOFeatures features = sourceLayer.GetAllFeatures(); string message = ""; for (int j = 0; j < features.Length; j++) { GSOFeature f = features[j]; GSOFeature newFeature = new GSOFeature(); GSOExtendSectionLineStyle3D style = new GSOExtendSectionLineStyle3D(); style.LineColor = Color.FromArgb(Convert.ToByte(numericUpDownLineOpaque.Value), btnPipelineColor.BackColor); double width = 0; GSOFieldDefn field = (GSOFieldDefn)(f.GetFieldDefn(cmbWidth.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbWidth.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) width = outNum; } else if (field.Type == EnumFieldType.Double) width = f.GetFieldAsDouble(cmbWidth.SelectedItem.ToString()); double height = 0; field = (GSOFieldDefn)(f.GetFieldDefn(cmbHeight.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbHeight.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) height = outNum; } else if (field.Type == EnumFieldType.Double) height = f.GetFieldAsDouble(cmbHeight.SelectedItem.ToString()); string eventid = f.GetFieldAsString(cmbID.SelectedItem.ToString()); if (width == 0 || height == 0) { message += "ID为" + f.ID + "的对象的沟宽或者沟高字段的值为0 \n"; continue; } GSOPoint3ds sectionpts = new GSOPoint3ds(); sectionpts.Add(new GSOPoint3d(width / -2, height / 2, 0)); sectionpts.Add(new GSOPoint3d(width / -2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / 2, 0)); style.SetSectionPoints(sectionpts); style.IsClosed = false; style.SetAnchorByAlign(EnumAlign.BottomCenter); f.Geometry.AltitudeMode = EnumAltitudeMode.RelativeToGround; GSOGeoPolyline3D line = f.Geometry as GSOGeoPolyline3D; if (line == null) { message += "ID为" + f.ID + "的对象不是线对象 \n"; continue; } double deep1 = f.GetFieldAsDouble(cmbFrom.SelectedItem.ToString()); double deep2 = f.GetFieldAsDouble(cmbTo.SelectedItem.ToString()); if (chkDeep.Checked) { deep1 = 0 - deep1; deep2 = 0 - deep2; } for (int n = 0; n < line[0].Count; n++) { GSOPoint3d pt3d = line[0][n]; int pointcount = line[0].Count; double radio = Math.Sqrt(Math.Pow(pt3d.Y - line[0][0].Y, 2) + Math.Pow(pt3d.X - line[0][0].X, 2)) / Math.Sqrt(Math.Pow(line[0][pointcount - 1].Y - line[0][0].Y, 2) + Math.Pow(line[0][pointcount - 1].X - line[0][0].X, 2)); pt3d.Z = deep1 + (deep2 - deep1) * radio; line[0][n] = pt3d; } newFeature.Geometry = line; // f.Geometry; newFeature.Geometry.Style = style; newFeature.Name = eventid; layer.AddFeature(newFeature); } ctl.Refresh(); layer.Save(); ctl.Globe.Layers.Remove(layer); string strMessage = "shp文件中共" + features.Length + "个对象,实际生成" + layer.GetAllFeatures().Length + "个对象!\n"; MessageBox.Show(strMessage + message, "提示"); this.Close(); } } catch (Exception ex) { Log.PublishTxt(ex); MessageBox.Show(ex.Message); } }
private GSOExtendSectionLineStyle3D createRectStyle(double width, double height) { GSOExtendSectionLineStyle3D style = new GSOExtendSectionLineStyle3D(); style.LineColor = Color.FromArgb(Convert.ToByte(numOpaqueRect.Value), btnRectColor.BackColor); if (width == 0 || height == 0) return null; GSOPoint3ds sectionpts = new GSOPoint3ds(); sectionpts.Add(new GSOPoint3d(width / -2, height / 2, 0)); sectionpts.Add(new GSOPoint3d(width / -2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / 2, 0)); style.SetSectionPoints(sectionpts); style.IsClosed = true; style.SetAnchorByAlign(EnumAlign.MiddleCenter); return style; }
private void btnCreateModel_Click(object sender, EventArgs e) { if (comboBoxDataSourceList.SelectedItem == null) { MessageBox.Show("请选择一个目标数据源!", "提示"); return; } GSODataSource ds = Utility.getDataSourceByFullName(globeControl1, comboBoxDataSourceList.SelectedItem.ToString().Trim()); if (ds == null) { MessageBox.Show("选择的目标数据源为空!", "提示"); return; } try { if (string.IsNullOrEmpty(textBoxNewLayerName.Text)) { MessageBox.Show("管线图层名称无效!", "提示"); return; } if (valiPipeData()) { GSODataset dataset = ds.GetDatasetByName(textBoxNewLayerName.Text.Trim()); GSOFeatureDataset newFeatureDataset; if (dataset != null) { DialogResult result = MessageBox.Show("管线图层名称在数据库中已存在!是否向该表追加", "提示", MessageBoxButtons.YesNo); if (result == DialogResult.Yes) { newFeatureDataset = dataset as GSOFeatureDataset; } else { return; } } else { newFeatureDataset = CreateDBFeatureDataset(textBoxNewLayerName.Text.Trim()); } if (newFeatureDataset == null) { MessageBox.Show("输入的图层名称不符合要求!", "提示"); return; } GSOLayer sourceLayer = globeControl1.Globe.Layers.GetLayerByCaption(comboBoxShpLayerList.SelectedItem.ToString().Trim()); if (sourceLayer == null) { MessageBox.Show("选择的shp图层为空!", "提示"); return; } newFeatureDataset.Open(); GSOFeatures features = sourceLayer.GetAllFeatures(true); string message = ""; for (int j = 0; j < features.Length; j++) { GSOFeature f = features[j]; GSOFeature newFeature = newFeatureDataset.CreateFeature(); string maisheFangshi = f.GetFieldAsString(cmbMaiSheFangShi.SelectedItem.ToString()); string eventid = f.GetFieldAsString(cmbID.SelectedItem.ToString()); f.Geometry.AltitudeMode = EnumAltitudeMode.RelativeToGround; GSOGeoPolyline3D line = f.Geometry as GSOGeoPolyline3D; if (line == null) { message += "ID为" + f.ID + "的管线不是一个线对象\r\n"; continue; } double deep1 = f.GetFieldAsDouble(cmbFrom.SelectedItem.ToString()); double deep2 = f.GetFieldAsDouble(cmbTo.SelectedItem.ToString()); if (chkDeep.Checked) { deep1 = 0 - deep1; deep2 = 0 - deep2; } if (maisheFangshi == "直埋") { GSOPipeLineStyle3D style = new GSOPipeLineStyle3D(); style.LineColor = Color.FromArgb(Convert.ToByte(numericUpDownLineOpaque.Value), btnPipelineColor.BackColor); double radius = 0; GSOFieldDefn field = (GSOFieldDefn)(f.GetFieldDefn(cmbRadius.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbRadius.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) { radius = outNum / 2000; } } else if (field.Type == EnumFieldType.Double) { radius = f.GetFieldAsDouble(cmbRadius.SelectedItem.ToString()) / 2000; // 探测数据的单位一般是毫米,需换算为米; 管径一般是 直径, 这个需要半径, 所有除以2000 } if (radius == 0) { message += "ID为" + f.ID + "的管线半径为0\r\n"; continue; } style.Radius = radius; style.Slice = int.Parse(txtSlice.Text); style.CornerSliceAngle = Convert.ToDouble(textBoxCornerSliceAngle.Text); if (cmbReference.SelectedIndex == 0) //管底 { deep1 = deep1 + radius * 2; deep2 = deep2 + radius * 2; } else if (cmbReference.SelectedIndex == 1) //管顶 { deep1 = deep1 - radius * 2; deep2 = deep2 - radius * 2; } for (int n = 0; n < line[0].Count; n++) { GSOPoint3d pt3d = line[0][n]; int pointcount = line[0].Count; double fenmu = Math.Sqrt(Math.Pow(line[0][pointcount - 1].Y - line[0][0].Y, 2) + Math.Pow(line[0][pointcount - 1].X - line[0][0].X, 2)); if (fenmu == 0) { pt3d.Z = deep1; } else { double radio = Math.Sqrt(Math.Pow(pt3d.Y - line[0][0].Y, 2) + Math.Pow(pt3d.X - line[0][0].X, 2)) / fenmu; pt3d.Z = deep1 + (deep2 - deep1) * radio; } line[0][n] = pt3d; } newFeature.Geometry = line; // f.Geometry; newFeature.Geometry.Style = style; } else if (maisheFangshi == "沟道") { GSOExtendSectionLineStyle3D style = new GSOExtendSectionLineStyle3D(); style.LineColor = Color.FromArgb(Convert.ToByte(numericUpDownLineOpaque.Value), btnPipelineColor.BackColor); double width = 0; GSOFieldDefn field = (GSOFieldDefn)(f.GetFieldDefn(cmbWidth.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbWidth.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) { width = outNum; } } else if (field.Type == EnumFieldType.Double) { width = f.GetFieldAsDouble(cmbWidth.SelectedItem.ToString()); } double height = 0; field = (GSOFieldDefn)(f.GetFieldDefn(cmbHeight.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbHeight.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) { height = outNum; } } else if (field.Type == EnumFieldType.Double) { height = f.GetFieldAsDouble(cmbHeight.SelectedItem.ToString()); } if (width == 0 || height == 0) { message += "ID为" + f.ID + "的沟道的宽度或高度为0\r\n"; continue; } GSOPoint3ds sectionpts = new GSOPoint3ds(); sectionpts.Add(new GSOPoint3d(width / -2, height / 2, 0)); sectionpts.Add(new GSOPoint3d(width / -2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / 2, 0)); style.SetSectionPoints(sectionpts); style.IsClosed = false; style.SetAnchorByAlign(EnumAlign.BottomCenter); for (int n = 0; n < line[0].Count; n++) { GSOPoint3d pt3d = line[0][n]; int pointcount = line[0].Count; double fenmu = Math.Sqrt(Math.Pow(line[0][pointcount - 1].Y - line[0][0].Y, 2) + Math.Pow(line[0][pointcount - 1].X - line[0][0].X, 2)); if (fenmu == 0) { pt3d.Z = deep1; } else { double radio = Math.Sqrt(Math.Pow(pt3d.Y - line[0][0].Y, 2) + Math.Pow(pt3d.X - line[0][0].X, 2)) / fenmu; pt3d.Z = deep1 + (deep2 - deep1) * radio; } line[0][n] = pt3d; } newFeature.Geometry = line; // f.Geometry; newFeature.Geometry.Style = style; } else { message += "ID为" + f.ID + "的对象的埋设方式既不是直埋,也不是沟道\r\n"; continue; // 即不是 直埋,又不是 沟道,那么忽略该记录 } for (int i = 0; i < f.GetFieldCount(); i++) { GeoScene.Data.GSOFieldDefn fielddef = (GeoScene.Data.GSOFieldDefn)(f.GetFieldDefn(i)); if (!en_cns.ContainsKey(fielddef.Name)) { continue; } object fieldvalue = f.GetValue(fielddef.Name);// convertFieldValue(fielddef.Name, f.GetValue(fielddef.Name)); if (fieldvalue == null) { continue; } string fieldName = en_cns.ContainsKey(fielddef.Name) == true ? en_cns[fielddef.Name].ToString() : fielddef.Name; newFeature.SetValue(fieldName, fieldvalue); } newFeature.Name = eventid; newFeatureDataset.AddFeature(newFeature); } globeControl1.Refresh(); newFeatureDataset.Save(); newFeatureDataset.Close(); newFeatureDataset.Caption = newFeatureDataset.Name; globeControl1.Globe.Layers.Add(newFeatureDataset); string strMessage = "shp文件中共" + features.Length + "个对象,实际入库" + newFeatureDataset.GetAllFeatures().Length + "个对象!\r\n"; if (message == "") { MessageBox.Show(strMessage, "提示"); } else { FrmMessageShow frm = new FrmMessageShow(strMessage + message); frm.ShowDialog(); } this.Close(); } } catch (Exception ex) { Log.PublishTxt(ex); MessageBox.Show(ex.Message); } }
private void RefreshGlobe(GSOExtendSectionLineStyle3D extentSectionLineStyle3D) { mfeature.Geometry.Style = extentSectionLineStyle3D; mfeature.Geometry.AltitudeMode = EnumAltitudeMode.RelativeToGround; if (m_GlobeControl != null) { m_GlobeControl.Globe.Refresh(); } }
private void SetControlsByStyle(GSOStyle style) { if (m_Style != null) { extentSectionLineStyle3D = m_Style as GSOExtendSectionLineStyle3D; if (extentSectionLineStyle3D == null) { extentSectionLineStyle3D = new GSOExtendSectionLineStyle3D(); extentSectionLineStyle3D.LineColor = Color.Green; GSOPoint3ds points = new GSOPoint3ds(); points.Add(new GSOPoint3d(-0.5, 0.5, 0)); points.Add(new GSOPoint3d(-0.5, -0.5, 0)); points.Add(new GSOPoint3d(0.5, -0.5, 0)); points.Add(new GSOPoint3d(0.5, 0.5, 0)); extentSectionLineStyle3D.SetSectionPoints(points); RefreshGlobe(extentSectionLineStyle3D); } } else { extentSectionLineStyle3D = new GSOExtendSectionLineStyle3D(); extentSectionLineStyle3D.LineColor = Color.Green; GSOPoint3ds points = new GSOPoint3ds(); points.Add(new GSOPoint3d(-0.5, 0.5, 0)); points.Add(new GSOPoint3d(-0.5, -0.5, 0)); points.Add(new GSOPoint3d(0.5,- 0.5, 0)); points.Add(new GSOPoint3d(0.5, 0.5, 0)); extentSectionLineStyle3D.SetSectionPoints(points); RefreshGlobe(extentSectionLineStyle3D); } // 这句要写到前面,不然下面Checked的时候要检查 pictureBoxLineColor.BackColor = extentSectionLineStyle3D.LineColor; numericUpDownLineOpaque.Value = extentSectionLineStyle3D.LineColor.A; textBoxCornerSliceAngle.Text = extentSectionLineStyle3D.CornerSliceAngle.ToString(); GSOPoint3ds mpoints = extentSectionLineStyle3D.GetSectionPoints(); if (mpoints != null && mpoints.Count > 0) { for (int i = 0; i < mpoints.Count; i++) { GSOPoint3d point = mpoints[i]; if (point != null) { textBoxLineRadius.Text = (Math.Abs(point.X) * 2).ToString(); textBoxThickness.Text = (Math.Abs(point.Y) * 2).ToString(); break; } } } m_bInitialized = true; }
private void btnCreateModel_Click(object sender, EventArgs e) { if (comboBoxDataSourceList.SelectedItem == null) { MessageBox.Show("请选择一个目标数据源!", "提示"); return; } GSODataSource ds = Utility.getDataSourceByFullName(globeControl1, comboBoxDataSourceList.SelectedItem.ToString().Trim()); if (ds == null) { MessageBox.Show("选择的目标数据源为空!", "提示"); return; } try { if (string.IsNullOrEmpty(textBoxNewLayerName.Text)) { MessageBox.Show("管线图层名称无效!", "提示"); return; } if (valiPipeData()) { GSODataset dataset = ds.GetDatasetByName(textBoxNewLayerName.Text.Trim()); GSOFeatureDataset newFeatureDataset; if (dataset != null) { DialogResult result = MessageBox.Show("管线图层名称在数据库中已存在!是否向该表追加", "提示", MessageBoxButtons.YesNo); if (result == DialogResult.Yes) { newFeatureDataset = dataset as GSOFeatureDataset; } else { return; } } else { newFeatureDataset = CreateDBFeatureDataset(textBoxNewLayerName.Text.Trim()); } if (newFeatureDataset == null) { MessageBox.Show("输入的图层名称不符合要求!", "提示"); return; } GSOLayer sourceLayer = globeControl1.Globe.Layers.GetLayerByCaption(comboBoxShpLayerList.SelectedItem.ToString().Trim()); if (sourceLayer == null) { MessageBox.Show("选择的shp图层为空!", "提示"); return; } newFeatureDataset.Open(); GSOFeatures features = sourceLayer.GetAllFeatures(true); string message = ""; for (int j = 0; j < features.Length; j++) { GSOFeature f = features[j]; GSOFeature newFeature = newFeatureDataset.CreateFeature(); string maisheFangshi = f.GetFieldAsString(cmbMaiSheFangShi.SelectedItem.ToString()); string eventid = f.GetFieldAsString(cmbID.SelectedItem.ToString()); f.Geometry.AltitudeMode = EnumAltitudeMode.RelativeToGround; GSOGeoPolyline3D line = f.Geometry as GSOGeoPolyline3D; if (line == null) { message += "ID为" + f.ID + "的管线不是一个线对象\r\n"; continue; } double deep1 = f.GetFieldAsDouble(cmbFrom.SelectedItem.ToString()); double deep2 = f.GetFieldAsDouble(cmbTo.SelectedItem.ToString()); if (chkDeep.Checked) { deep1 = 0 - deep1; deep2 = 0 - deep2; } if (maisheFangshi == "直埋") { GSOPipeLineStyle3D style = new GSOPipeLineStyle3D(); style.LineColor = Color.FromArgb(Convert.ToByte(numericUpDownLineOpaque.Value), btnPipelineColor.BackColor); double radius = 0; GSOFieldDefn field = (GSOFieldDefn)(f.GetFieldDefn(cmbRadius.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbRadius.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) radius = outNum / 2000; } else if (field.Type == EnumFieldType.Double) radius = f.GetFieldAsDouble(cmbRadius.SelectedItem.ToString()) / 2000; // 探测数据的单位一般是毫米,需换算为米; 管径一般是 直径, 这个需要半径, 所有除以2000 if (radius == 0) { message += "ID为" + f.ID + "的管线半径为0\r\n"; continue; } style.Radius = radius; style.Slice = int.Parse(txtSlice.Text); style.CornerSliceAngle = Convert.ToDouble(textBoxCornerSliceAngle.Text); if (cmbReference.SelectedIndex == 0) //管底 { deep1 = deep1 + radius * 2; deep2 = deep2 + radius * 2; } else if (cmbReference.SelectedIndex == 1) //管顶 { deep1 = deep1 - radius * 2; deep2 = deep2 - radius * 2; } for (int n = 0; n < line[0].Count; n++) { GSOPoint3d pt3d = line[0][n]; int pointcount = line[0].Count; double fenmu = Math.Sqrt(Math.Pow(line[0][pointcount - 1].Y - line[0][0].Y, 2) + Math.Pow(line[0][pointcount - 1].X - line[0][0].X, 2)); if (fenmu == 0) pt3d.Z = deep1; else { double radio = Math.Sqrt(Math.Pow(pt3d.Y - line[0][0].Y, 2) + Math.Pow(pt3d.X - line[0][0].X, 2)) / fenmu; pt3d.Z = deep1 + (deep2 - deep1) * radio; } line[0][n] = pt3d; } newFeature.Geometry = line; // f.Geometry; newFeature.Geometry.Style = style; } else if (maisheFangshi == "沟道") { GSOExtendSectionLineStyle3D style = new GSOExtendSectionLineStyle3D(); style.LineColor = Color.FromArgb(Convert.ToByte(numericUpDownLineOpaque.Value), btnPipelineColor.BackColor); double width = 0; GSOFieldDefn field = (GSOFieldDefn)(f.GetFieldDefn(cmbWidth.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbWidth.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) width = outNum; } else if (field.Type == EnumFieldType.Double) width = f.GetFieldAsDouble(cmbWidth.SelectedItem.ToString()); double height = 0; field = (GSOFieldDefn)(f.GetFieldDefn(cmbHeight.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbHeight.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) height = outNum; } else if (field.Type == EnumFieldType.Double) height = f.GetFieldAsDouble(cmbHeight.SelectedItem.ToString()); if (width == 0 || height == 0) { message += "ID为" + f.ID + "的沟道的宽度或高度为0\r\n"; continue; } GSOPoint3ds sectionpts = new GSOPoint3ds(); sectionpts.Add(new GSOPoint3d(width / -2, height / 2, 0)); sectionpts.Add(new GSOPoint3d(width / -2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / 2, 0)); style.SetSectionPoints(sectionpts); style.IsClosed = false; style.SetAnchorByAlign(EnumAlign.BottomCenter); for (int n = 0; n < line[0].Count; n++) { GSOPoint3d pt3d = line[0][n]; int pointcount = line[0].Count; double fenmu = Math.Sqrt(Math.Pow(line[0][pointcount - 1].Y - line[0][0].Y, 2) + Math.Pow(line[0][pointcount - 1].X - line[0][0].X, 2)); if (fenmu == 0) pt3d.Z = deep1; else { double radio = Math.Sqrt(Math.Pow(pt3d.Y - line[0][0].Y, 2) + Math.Pow(pt3d.X - line[0][0].X, 2)) / fenmu; pt3d.Z = deep1 + (deep2 - deep1) * radio; } line[0][n] = pt3d; } newFeature.Geometry = line; // f.Geometry; newFeature.Geometry.Style = style; } else { message += "ID为" + f.ID + "的对象的埋设方式既不是直埋,也不是沟道\r\n"; continue; // 即不是 直埋,又不是 沟道,那么忽略该记录 } for (int i = 0; i < f.GetFieldCount(); i++) { GeoScene.Data.GSOFieldDefn fielddef = (GeoScene.Data.GSOFieldDefn)(f.GetFieldDefn(i)); if (!en_cns.ContainsKey(fielddef.Name)) continue; object fieldvalue = f.GetValue(fielddef.Name);// convertFieldValue(fielddef.Name, f.GetValue(fielddef.Name)); if (fieldvalue == null) continue; string fieldName = en_cns.ContainsKey(fielddef.Name) == true ? en_cns[fielddef.Name].ToString() : fielddef.Name; newFeature.SetValue(fieldName, fieldvalue); } newFeature.Name = eventid; newFeatureDataset.AddFeature(newFeature); } globeControl1.Refresh(); newFeatureDataset.Save(); newFeatureDataset.Close(); newFeatureDataset.Caption = newFeatureDataset.Name; globeControl1.Globe.Layers.Add(newFeatureDataset); string strMessage = "shp文件中共" + features.Length + "个对象,实际入库" + newFeatureDataset.GetAllFeatures().Length + "个对象!\r\n"; if (message == "") { MessageBox.Show(strMessage, "提示"); } else { FrmMessageShow frm = new FrmMessageShow(strMessage + message); frm.ShowDialog(); } this.Close(); } } catch (Exception ex) { Log.PublishTxt(ex); MessageBox.Show(ex.Message); } }
private void btnCreateModel_Click(object sender, EventArgs e) { try { if (string.IsNullOrEmpty(txtModelLayer.Text)) { MessageBox.Show("管线模型文件路径无效!", "提示"); return; } if (File.Exists(txtModelLayer.Text)) { MessageBox.Show("管线模型文件已存在!", "提示"); return; } GSOLayer sourceLayer = ctl.Globe.Layers[cmbLayer.SelectedIndex]; GSOLayer layer = ctl.Globe.Layers.Add(txtModelLayer.Text); lgdFilePath = txtModelLayer.Text; if (layer != null) { GSOFeatures features = sourceLayer.GetAllFeatures(); string message = ""; for (int j = 0; j < features.Length; j++) { GSOFeature f = features[j]; GSOFeature newFeature = new GSOFeature(); GSOExtendSectionLineStyle3D style = new GSOExtendSectionLineStyle3D(); style.LineColor = Color.FromArgb(Convert.ToByte(numericUpDownLineOpaque.Value), btnPipelineColor.BackColor); double width = 0; GSOFieldDefn field = (GSOFieldDefn)(f.GetFieldDefn(cmbWidth.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbWidth.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) { width = outNum; } } else if (field.Type == EnumFieldType.Double) { width = f.GetFieldAsDouble(cmbWidth.SelectedItem.ToString()); } double height = 0; field = (GSOFieldDefn)(f.GetFieldDefn(cmbHeight.SelectedItem.ToString())); if (field.Type == EnumFieldType.Text) { string temp = f.GetFieldAsString(cmbHeight.SelectedItem.ToString()); double outNum = 0; bool num = double.TryParse(temp, out outNum); if (num) { height = outNum; } } else if (field.Type == EnumFieldType.Double) { height = f.GetFieldAsDouble(cmbHeight.SelectedItem.ToString()); } string eventid = f.GetFieldAsString(cmbID.SelectedItem.ToString()); if (width == 0 || height == 0) { message += "ID为" + f.ID + "的对象的沟宽或者沟高字段的值为0 \n"; continue; } GSOPoint3ds sectionpts = new GSOPoint3ds(); sectionpts.Add(new GSOPoint3d(width / -2, height / 2, 0)); sectionpts.Add(new GSOPoint3d(width / -2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / -2, 0)); sectionpts.Add(new GSOPoint3d(width / 2, height / 2, 0)); style.SetSectionPoints(sectionpts); style.IsClosed = false; style.SetAnchorByAlign(EnumAlign.BottomCenter); f.Geometry.AltitudeMode = EnumAltitudeMode.RelativeToGround; GSOGeoPolyline3D line = f.Geometry as GSOGeoPolyline3D; if (line == null) { message += "ID为" + f.ID + "的对象不是线对象 \n"; continue; } double deep1 = f.GetFieldAsDouble(cmbFrom.SelectedItem.ToString()); double deep2 = f.GetFieldAsDouble(cmbTo.SelectedItem.ToString()); if (chkDeep.Checked) { deep1 = 0 - deep1; deep2 = 0 - deep2; } for (int n = 0; n < line[0].Count; n++) { GSOPoint3d pt3d = line[0][n]; int pointcount = line[0].Count; double radio = Math.Sqrt(Math.Pow(pt3d.Y - line[0][0].Y, 2) + Math.Pow(pt3d.X - line[0][0].X, 2)) / Math.Sqrt(Math.Pow(line[0][pointcount - 1].Y - line[0][0].Y, 2) + Math.Pow(line[0][pointcount - 1].X - line[0][0].X, 2)); pt3d.Z = deep1 + (deep2 - deep1) * radio; line[0][n] = pt3d; } newFeature.Geometry = line; // f.Geometry; newFeature.Geometry.Style = style; newFeature.Name = eventid; layer.AddFeature(newFeature); } ctl.Refresh(); layer.Save(); ctl.Globe.Layers.Remove(layer); string strMessage = "shp文件中共" + features.Length + "个对象,实际生成" + layer.GetAllFeatures().Length + "个对象!\n"; MessageBox.Show(strMessage + message, "提示"); this.Close(); } } catch (Exception ex) { Log.PublishTxt(ex); MessageBox.Show(ex.Message); } }